1 /****************************************************************************** 2 * 3 * Module Name: psargs - Parse AML opcode arguments 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2012, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #define __PSARGS_C__ 45 46 #include <contrib/dev/acpica/include/acpi.h> 47 #include <contrib/dev/acpica/include/accommon.h> 48 #include <contrib/dev/acpica/include/acparser.h> 49 #include <contrib/dev/acpica/include/amlcode.h> 50 #include <contrib/dev/acpica/include/acnamesp.h> 51 #include <contrib/dev/acpica/include/acdispat.h> 52 53 #define _COMPONENT ACPI_PARSER 54 ACPI_MODULE_NAME ("psargs") 55 56 /* Local prototypes */ 57 58 static UINT32 59 AcpiPsGetNextPackageLength ( 60 ACPI_PARSE_STATE *ParserState); 61 62 static ACPI_PARSE_OBJECT * 63 AcpiPsGetNextField ( 64 ACPI_PARSE_STATE *ParserState); 65 66 67 /******************************************************************************* 68 * 69 * FUNCTION: AcpiPsGetNextPackageLength 70 * 71 * PARAMETERS: ParserState - Current parser state object 72 * 73 * RETURN: Decoded package length. On completion, the AML pointer points 74 * past the length byte or bytes. 75 * 76 * DESCRIPTION: Decode and return a package length field. 77 * Note: Largest package length is 28 bits, from ACPI specification 78 * 79 ******************************************************************************/ 80 81 static UINT32 82 AcpiPsGetNextPackageLength ( 83 ACPI_PARSE_STATE *ParserState) 84 { 85 UINT8 *Aml = ParserState->Aml; 86 UINT32 PackageLength = 0; 87 UINT32 ByteCount; 88 UINT8 ByteZeroMask = 0x3F; /* Default [0:5] */ 89 90 91 ACPI_FUNCTION_TRACE (PsGetNextPackageLength); 92 93 94 /* 95 * Byte 0 bits [6:7] contain the number of additional bytes 96 * used to encode the package length, either 0,1,2, or 3 97 */ 98 ByteCount = (Aml[0] >> 6); 99 ParserState->Aml += ((ACPI_SIZE) ByteCount + 1); 100 101 /* Get bytes 3, 2, 1 as needed */ 102 103 while (ByteCount) 104 { 105 /* 106 * Final bit positions for the package length bytes: 107 * Byte3->[20:27] 108 * Byte2->[12:19] 109 * Byte1->[04:11] 110 * Byte0->[00:03] 111 */ 112 PackageLength |= (Aml[ByteCount] << ((ByteCount << 3) - 4)); 113 114 ByteZeroMask = 0x0F; /* Use bits [0:3] of byte 0 */ 115 ByteCount--; 116 } 117 118 /* Byte 0 is a special case, either bits [0:3] or [0:5] are used */ 119 120 PackageLength |= (Aml[0] & ByteZeroMask); 121 return_UINT32 (PackageLength); 122 } 123 124 125 /******************************************************************************* 126 * 127 * FUNCTION: AcpiPsGetNextPackageEnd 128 * 129 * PARAMETERS: ParserState - Current parser state object 130 * 131 * RETURN: Pointer to end-of-package +1 132 * 133 * DESCRIPTION: Get next package length and return a pointer past the end of 134 * the package. Consumes the package length field 135 * 136 ******************************************************************************/ 137 138 UINT8 * 139 AcpiPsGetNextPackageEnd ( 140 ACPI_PARSE_STATE *ParserState) 141 { 142 UINT8 *Start = ParserState->Aml; 143 UINT32 PackageLength; 144 145 146 ACPI_FUNCTION_TRACE (PsGetNextPackageEnd); 147 148 149 /* Function below updates ParserState->Aml */ 150 151 PackageLength = AcpiPsGetNextPackageLength (ParserState); 152 153 return_PTR (Start + PackageLength); /* end of package */ 154 } 155 156 157 /******************************************************************************* 158 * 159 * FUNCTION: AcpiPsGetNextNamestring 160 * 161 * PARAMETERS: ParserState - Current parser state object 162 * 163 * RETURN: Pointer to the start of the name string (pointer points into 164 * the AML. 165 * 166 * DESCRIPTION: Get next raw namestring within the AML stream. Handles all name 167 * prefix characters. Set parser state to point past the string. 168 * (Name is consumed from the AML.) 169 * 170 ******************************************************************************/ 171 172 char * 173 AcpiPsGetNextNamestring ( 174 ACPI_PARSE_STATE *ParserState) 175 { 176 UINT8 *Start = ParserState->Aml; 177 UINT8 *End = ParserState->Aml; 178 179 180 ACPI_FUNCTION_TRACE (PsGetNextNamestring); 181 182 183 /* Point past any namestring prefix characters (backslash or carat) */ 184 185 while (AcpiPsIsPrefixChar (*End)) 186 { 187 End++; 188 } 189 190 /* Decode the path prefix character */ 191 192 switch (*End) 193 { 194 case 0: 195 196 /* NullName */ 197 198 if (End == Start) 199 { 200 Start = NULL; 201 } 202 End++; 203 break; 204 205 case AML_DUAL_NAME_PREFIX: 206 207 /* Two name segments */ 208 209 End += 1 + (2 * ACPI_NAME_SIZE); 210 break; 211 212 case AML_MULTI_NAME_PREFIX_OP: 213 214 /* Multiple name segments, 4 chars each, count in next byte */ 215 216 End += 2 + (*(End + 1) * ACPI_NAME_SIZE); 217 break; 218 219 default: 220 221 /* Single name segment */ 222 223 End += ACPI_NAME_SIZE; 224 break; 225 } 226 227 ParserState->Aml = End; 228 return_PTR ((char *) Start); 229 } 230 231 232 /******************************************************************************* 233 * 234 * FUNCTION: AcpiPsGetNextNamepath 235 * 236 * PARAMETERS: ParserState - Current parser state object 237 * Arg - Where the namepath will be stored 238 * ArgCount - If the namepath points to a control method 239 * the method's argument is returned here. 240 * PossibleMethodCall - Whether the namepath can possibly be the 241 * start of a method call 242 * 243 * RETURN: Status 244 * 245 * DESCRIPTION: Get next name (if method call, return # of required args). 246 * Names are looked up in the internal namespace to determine 247 * if the name represents a control method. If a method 248 * is found, the number of arguments to the method is returned. 249 * This information is critical for parsing to continue correctly. 250 * 251 ******************************************************************************/ 252 253 ACPI_STATUS 254 AcpiPsGetNextNamepath ( 255 ACPI_WALK_STATE *WalkState, 256 ACPI_PARSE_STATE *ParserState, 257 ACPI_PARSE_OBJECT *Arg, 258 BOOLEAN PossibleMethodCall) 259 { 260 ACPI_STATUS Status; 261 char *Path; 262 ACPI_PARSE_OBJECT *NameOp; 263 ACPI_OPERAND_OBJECT *MethodDesc; 264 ACPI_NAMESPACE_NODE *Node; 265 UINT8 *Start = ParserState->Aml; 266 267 268 ACPI_FUNCTION_TRACE (PsGetNextNamepath); 269 270 271 Path = AcpiPsGetNextNamestring (ParserState); 272 AcpiPsInitOp (Arg, AML_INT_NAMEPATH_OP); 273 274 /* Null path case is allowed, just exit */ 275 276 if (!Path) 277 { 278 Arg->Common.Value.Name = Path; 279 return_ACPI_STATUS (AE_OK); 280 } 281 282 /* 283 * Lookup the name in the internal namespace, starting with the current 284 * scope. We don't want to add anything new to the namespace here, 285 * however, so we use MODE_EXECUTE. 286 * Allow searching of the parent tree, but don't open a new scope - 287 * we just want to lookup the object (must be mode EXECUTE to perform 288 * the upsearch) 289 */ 290 Status = AcpiNsLookup (WalkState->ScopeInfo, Path, 291 ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE, 292 ACPI_NS_SEARCH_PARENT | ACPI_NS_DONT_OPEN_SCOPE, NULL, &Node); 293 294 /* 295 * If this name is a control method invocation, we must 296 * setup the method call 297 */ 298 if (ACPI_SUCCESS (Status) && 299 PossibleMethodCall && 300 (Node->Type == ACPI_TYPE_METHOD)) 301 { 302 if (WalkState->Opcode == AML_UNLOAD_OP) 303 { 304 /* 305 * AcpiPsGetNextNamestring has increased the AML pointer, 306 * so we need to restore the saved AML pointer for method call. 307 */ 308 WalkState->ParserState.Aml = Start; 309 WalkState->ArgCount = 1; 310 AcpiPsInitOp (Arg, AML_INT_METHODCALL_OP); 311 return_ACPI_STATUS (AE_OK); 312 } 313 314 /* This name is actually a control method invocation */ 315 316 MethodDesc = AcpiNsGetAttachedObject (Node); 317 ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, 318 "Control Method - %p Desc %p Path=%p\n", Node, MethodDesc, Path)); 319 320 NameOp = AcpiPsAllocOp (AML_INT_NAMEPATH_OP); 321 if (!NameOp) 322 { 323 return_ACPI_STATUS (AE_NO_MEMORY); 324 } 325 326 /* Change Arg into a METHOD CALL and attach name to it */ 327 328 AcpiPsInitOp (Arg, AML_INT_METHODCALL_OP); 329 NameOp->Common.Value.Name = Path; 330 331 /* Point METHODCALL/NAME to the METHOD Node */ 332 333 NameOp->Common.Node = Node; 334 AcpiPsAppendArg (Arg, NameOp); 335 336 if (!MethodDesc) 337 { 338 ACPI_ERROR ((AE_INFO, 339 "Control Method %p has no attached object", 340 Node)); 341 return_ACPI_STATUS (AE_AML_INTERNAL); 342 } 343 344 ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, 345 "Control Method - %p Args %X\n", 346 Node, MethodDesc->Method.ParamCount)); 347 348 /* Get the number of arguments to expect */ 349 350 WalkState->ArgCount = MethodDesc->Method.ParamCount; 351 return_ACPI_STATUS (AE_OK); 352 } 353 354 /* 355 * Special handling if the name was not found during the lookup - 356 * some NotFound cases are allowed 357 */ 358 if (Status == AE_NOT_FOUND) 359 { 360 /* 1) NotFound is ok during load pass 1/2 (allow forward references) */ 361 362 if ((WalkState->ParseFlags & ACPI_PARSE_MODE_MASK) != 363 ACPI_PARSE_EXECUTE) 364 { 365 Status = AE_OK; 366 } 367 368 /* 2) NotFound during a CondRefOf(x) is ok by definition */ 369 370 else if (WalkState->Op->Common.AmlOpcode == AML_COND_REF_OF_OP) 371 { 372 Status = AE_OK; 373 } 374 375 /* 376 * 3) NotFound while building a Package is ok at this point, we 377 * may flag as an error later if slack mode is not enabled. 378 * (Some ASL code depends on allowing this behavior) 379 */ 380 else if ((Arg->Common.Parent) && 381 ((Arg->Common.Parent->Common.AmlOpcode == AML_PACKAGE_OP) || 382 (Arg->Common.Parent->Common.AmlOpcode == AML_VAR_PACKAGE_OP))) 383 { 384 Status = AE_OK; 385 } 386 } 387 388 /* Final exception check (may have been changed from code above) */ 389 390 if (ACPI_FAILURE (Status)) 391 { 392 ACPI_ERROR_NAMESPACE (Path, Status); 393 394 if ((WalkState->ParseFlags & ACPI_PARSE_MODE_MASK) == 395 ACPI_PARSE_EXECUTE) 396 { 397 /* Report a control method execution error */ 398 399 Status = AcpiDsMethodError (Status, WalkState); 400 } 401 } 402 403 /* Save the namepath */ 404 405 Arg->Common.Value.Name = Path; 406 return_ACPI_STATUS (Status); 407 } 408 409 410 /******************************************************************************* 411 * 412 * FUNCTION: AcpiPsGetNextSimpleArg 413 * 414 * PARAMETERS: ParserState - Current parser state object 415 * ArgType - The argument type (AML_*_ARG) 416 * Arg - Where the argument is returned 417 * 418 * RETURN: None 419 * 420 * DESCRIPTION: Get the next simple argument (constant, string, or namestring) 421 * 422 ******************************************************************************/ 423 424 void 425 AcpiPsGetNextSimpleArg ( 426 ACPI_PARSE_STATE *ParserState, 427 UINT32 ArgType, 428 ACPI_PARSE_OBJECT *Arg) 429 { 430 UINT32 Length; 431 UINT16 Opcode; 432 UINT8 *Aml = ParserState->Aml; 433 434 435 ACPI_FUNCTION_TRACE_U32 (PsGetNextSimpleArg, ArgType); 436 437 438 switch (ArgType) 439 { 440 case ARGP_BYTEDATA: 441 442 /* Get 1 byte from the AML stream */ 443 444 Opcode = AML_BYTE_OP; 445 Arg->Common.Value.Integer = (UINT64) *Aml; 446 Length = 1; 447 break; 448 449 450 case ARGP_WORDDATA: 451 452 /* Get 2 bytes from the AML stream */ 453 454 Opcode = AML_WORD_OP; 455 ACPI_MOVE_16_TO_64 (&Arg->Common.Value.Integer, Aml); 456 Length = 2; 457 break; 458 459 460 case ARGP_DWORDDATA: 461 462 /* Get 4 bytes from the AML stream */ 463 464 Opcode = AML_DWORD_OP; 465 ACPI_MOVE_32_TO_64 (&Arg->Common.Value.Integer, Aml); 466 Length = 4; 467 break; 468 469 470 case ARGP_QWORDDATA: 471 472 /* Get 8 bytes from the AML stream */ 473 474 Opcode = AML_QWORD_OP; 475 ACPI_MOVE_64_TO_64 (&Arg->Common.Value.Integer, Aml); 476 Length = 8; 477 break; 478 479 480 case ARGP_CHARLIST: 481 482 /* Get a pointer to the string, point past the string */ 483 484 Opcode = AML_STRING_OP; 485 Arg->Common.Value.String = ACPI_CAST_PTR (char, Aml); 486 487 /* Find the null terminator */ 488 489 Length = 0; 490 while (Aml[Length]) 491 { 492 Length++; 493 } 494 Length++; 495 break; 496 497 498 case ARGP_NAME: 499 case ARGP_NAMESTRING: 500 501 AcpiPsInitOp (Arg, AML_INT_NAMEPATH_OP); 502 Arg->Common.Value.Name = AcpiPsGetNextNamestring (ParserState); 503 return_VOID; 504 505 506 default: 507 508 ACPI_ERROR ((AE_INFO, "Invalid ArgType 0x%X", ArgType)); 509 return_VOID; 510 } 511 512 AcpiPsInitOp (Arg, Opcode); 513 ParserState->Aml += Length; 514 return_VOID; 515 } 516 517 518 /******************************************************************************* 519 * 520 * FUNCTION: AcpiPsGetNextField 521 * 522 * PARAMETERS: ParserState - Current parser state object 523 * 524 * RETURN: A newly allocated FIELD op 525 * 526 * DESCRIPTION: Get next field (NamedField, ReservedField, or AccessField) 527 * 528 ******************************************************************************/ 529 530 static ACPI_PARSE_OBJECT * 531 AcpiPsGetNextField ( 532 ACPI_PARSE_STATE *ParserState) 533 { 534 UINT32 AmlOffset; 535 ACPI_PARSE_OBJECT *Field; 536 ACPI_PARSE_OBJECT *Arg = NULL; 537 UINT16 Opcode; 538 UINT32 Name; 539 UINT8 AccessType; 540 UINT8 AccessAttribute; 541 UINT8 AccessLength; 542 UINT32 PkgLength; 543 UINT8 *PkgEnd; 544 UINT32 BufferLength; 545 546 547 ACPI_FUNCTION_TRACE (PsGetNextField); 548 549 550 AmlOffset = (UINT32) ACPI_PTR_DIFF ( 551 ParserState->Aml, ParserState->AmlStart); 552 553 /* Determine field type */ 554 555 switch (ACPI_GET8 (ParserState->Aml)) 556 { 557 case AML_FIELD_OFFSET_OP: 558 559 Opcode = AML_INT_RESERVEDFIELD_OP; 560 ParserState->Aml++; 561 break; 562 563 case AML_FIELD_ACCESS_OP: 564 565 Opcode = AML_INT_ACCESSFIELD_OP; 566 ParserState->Aml++; 567 break; 568 569 case AML_FIELD_CONNECTION_OP: 570 571 Opcode = AML_INT_CONNECTION_OP; 572 ParserState->Aml++; 573 break; 574 575 case AML_FIELD_EXT_ACCESS_OP: 576 577 Opcode = AML_INT_EXTACCESSFIELD_OP; 578 ParserState->Aml++; 579 break; 580 581 default: 582 583 Opcode = AML_INT_NAMEDFIELD_OP; 584 break; 585 } 586 587 /* Allocate a new field op */ 588 589 Field = AcpiPsAllocOp (Opcode); 590 if (!Field) 591 { 592 return_PTR (NULL); 593 } 594 595 Field->Common.AmlOffset = AmlOffset; 596 597 /* Decode the field type */ 598 599 switch (Opcode) 600 { 601 case AML_INT_NAMEDFIELD_OP: 602 603 /* Get the 4-character name */ 604 605 ACPI_MOVE_32_TO_32 (&Name, ParserState->Aml); 606 AcpiPsSetName (Field, Name); 607 ParserState->Aml += ACPI_NAME_SIZE; 608 609 /* Get the length which is encoded as a package length */ 610 611 Field->Common.Value.Size = AcpiPsGetNextPackageLength (ParserState); 612 break; 613 614 615 case AML_INT_RESERVEDFIELD_OP: 616 617 /* Get the length which is encoded as a package length */ 618 619 Field->Common.Value.Size = AcpiPsGetNextPackageLength (ParserState); 620 break; 621 622 623 case AML_INT_ACCESSFIELD_OP: 624 case AML_INT_EXTACCESSFIELD_OP: 625 626 /* 627 * Get AccessType and AccessAttrib and merge into the field Op 628 * AccessType is first operand, AccessAttribute is second. stuff 629 * these bytes into the node integer value for convenience. 630 */ 631 632 /* Get the two bytes (Type/Attribute) */ 633 634 AccessType = ACPI_GET8 (ParserState->Aml); 635 ParserState->Aml++; 636 AccessAttribute = ACPI_GET8 (ParserState->Aml); 637 ParserState->Aml++; 638 639 Field->Common.Value.Integer = (UINT8) AccessType; 640 Field->Common.Value.Integer |= (UINT16) (AccessAttribute << 8); 641 642 /* This opcode has a third byte, AccessLength */ 643 644 if (Opcode == AML_INT_EXTACCESSFIELD_OP) 645 { 646 AccessLength = ACPI_GET8 (ParserState->Aml); 647 ParserState->Aml++; 648 649 Field->Common.Value.Integer |= (UINT32) (AccessLength << 16); 650 } 651 break; 652 653 654 case AML_INT_CONNECTION_OP: 655 656 /* 657 * Argument for Connection operator can be either a Buffer 658 * (resource descriptor), or a NameString. 659 */ 660 if (ACPI_GET8 (ParserState->Aml) == AML_BUFFER_OP) 661 { 662 ParserState->Aml++; 663 664 PkgEnd = ParserState->Aml; 665 PkgLength = AcpiPsGetNextPackageLength (ParserState); 666 PkgEnd += PkgLength; 667 668 if (ParserState->Aml < PkgEnd) 669 { 670 /* Non-empty list */ 671 672 Arg = AcpiPsAllocOp (AML_INT_BYTELIST_OP); 673 if (!Arg) 674 { 675 return_PTR (NULL); 676 } 677 678 /* Get the actual buffer length argument */ 679 680 Opcode = ACPI_GET8 (ParserState->Aml); 681 ParserState->Aml++; 682 683 switch (Opcode) 684 { 685 case AML_BYTE_OP: /* AML_BYTEDATA_ARG */ 686 BufferLength = ACPI_GET8 (ParserState->Aml); 687 ParserState->Aml += 1; 688 break; 689 690 case AML_WORD_OP: /* AML_WORDDATA_ARG */ 691 BufferLength = ACPI_GET16 (ParserState->Aml); 692 ParserState->Aml += 2; 693 break; 694 695 case AML_DWORD_OP: /* AML_DWORDATA_ARG */ 696 BufferLength = ACPI_GET32 (ParserState->Aml); 697 ParserState->Aml += 4; 698 break; 699 700 default: 701 BufferLength = 0; 702 break; 703 } 704 705 /* Fill in bytelist data */ 706 707 Arg->Named.Value.Size = BufferLength; 708 Arg->Named.Data = ParserState->Aml; 709 } 710 711 /* Skip to End of byte data */ 712 713 ParserState->Aml = PkgEnd; 714 } 715 else 716 { 717 Arg = AcpiPsAllocOp (AML_INT_NAMEPATH_OP); 718 if (!Arg) 719 { 720 return_PTR (NULL); 721 } 722 723 /* Get the Namestring argument */ 724 725 Arg->Common.Value.Name = AcpiPsGetNextNamestring (ParserState); 726 } 727 728 /* Link the buffer/namestring to parent (CONNECTION_OP) */ 729 730 AcpiPsAppendArg (Field, Arg); 731 break; 732 733 734 default: 735 736 /* Opcode was set in previous switch */ 737 break; 738 } 739 740 return_PTR (Field); 741 } 742 743 744 /******************************************************************************* 745 * 746 * FUNCTION: AcpiPsGetNextArg 747 * 748 * PARAMETERS: WalkState - Current state 749 * ParserState - Current parser state object 750 * ArgType - The argument type (AML_*_ARG) 751 * ReturnArg - Where the next arg is returned 752 * 753 * RETURN: Status, and an op object containing the next argument. 754 * 755 * DESCRIPTION: Get next argument (including complex list arguments that require 756 * pushing the parser stack) 757 * 758 ******************************************************************************/ 759 760 ACPI_STATUS 761 AcpiPsGetNextArg ( 762 ACPI_WALK_STATE *WalkState, 763 ACPI_PARSE_STATE *ParserState, 764 UINT32 ArgType, 765 ACPI_PARSE_OBJECT **ReturnArg) 766 { 767 ACPI_PARSE_OBJECT *Arg = NULL; 768 ACPI_PARSE_OBJECT *Prev = NULL; 769 ACPI_PARSE_OBJECT *Field; 770 UINT32 Subop; 771 ACPI_STATUS Status = AE_OK; 772 773 774 ACPI_FUNCTION_TRACE_PTR (PsGetNextArg, ParserState); 775 776 777 switch (ArgType) 778 { 779 case ARGP_BYTEDATA: 780 case ARGP_WORDDATA: 781 case ARGP_DWORDDATA: 782 case ARGP_CHARLIST: 783 case ARGP_NAME: 784 case ARGP_NAMESTRING: 785 786 /* Constants, strings, and namestrings are all the same size */ 787 788 Arg = AcpiPsAllocOp (AML_BYTE_OP); 789 if (!Arg) 790 { 791 return_ACPI_STATUS (AE_NO_MEMORY); 792 } 793 AcpiPsGetNextSimpleArg (ParserState, ArgType, Arg); 794 break; 795 796 797 case ARGP_PKGLENGTH: 798 799 /* Package length, nothing returned */ 800 801 ParserState->PkgEnd = AcpiPsGetNextPackageEnd (ParserState); 802 break; 803 804 805 case ARGP_FIELDLIST: 806 807 if (ParserState->Aml < ParserState->PkgEnd) 808 { 809 /* Non-empty list */ 810 811 while (ParserState->Aml < ParserState->PkgEnd) 812 { 813 Field = AcpiPsGetNextField (ParserState); 814 if (!Field) 815 { 816 return_ACPI_STATUS (AE_NO_MEMORY); 817 } 818 819 if (Prev) 820 { 821 Prev->Common.Next = Field; 822 } 823 else 824 { 825 Arg = Field; 826 } 827 Prev = Field; 828 } 829 830 /* Skip to End of byte data */ 831 832 ParserState->Aml = ParserState->PkgEnd; 833 } 834 break; 835 836 837 case ARGP_BYTELIST: 838 839 if (ParserState->Aml < ParserState->PkgEnd) 840 { 841 /* Non-empty list */ 842 843 Arg = AcpiPsAllocOp (AML_INT_BYTELIST_OP); 844 if (!Arg) 845 { 846 return_ACPI_STATUS (AE_NO_MEMORY); 847 } 848 849 /* Fill in bytelist data */ 850 851 Arg->Common.Value.Size = (UINT32) 852 ACPI_PTR_DIFF (ParserState->PkgEnd, ParserState->Aml); 853 Arg->Named.Data = ParserState->Aml; 854 855 /* Skip to End of byte data */ 856 857 ParserState->Aml = ParserState->PkgEnd; 858 } 859 break; 860 861 862 case ARGP_TARGET: 863 case ARGP_SUPERNAME: 864 case ARGP_SIMPLENAME: 865 866 Subop = AcpiPsPeekOpcode (ParserState); 867 if (Subop == 0 || 868 AcpiPsIsLeadingChar (Subop) || 869 AcpiPsIsPrefixChar (Subop)) 870 { 871 /* NullName or NameString */ 872 873 Arg = AcpiPsAllocOp (AML_INT_NAMEPATH_OP); 874 if (!Arg) 875 { 876 return_ACPI_STATUS (AE_NO_MEMORY); 877 } 878 879 /* To support SuperName arg of Unload */ 880 881 if (WalkState->Opcode == AML_UNLOAD_OP) 882 { 883 Status = AcpiPsGetNextNamepath (WalkState, ParserState, Arg, 1); 884 885 /* 886 * If the SuperName arg of Unload is a method call, 887 * we have restored the AML pointer, just free this Arg 888 */ 889 if (Arg->Common.AmlOpcode == AML_INT_METHODCALL_OP) 890 { 891 AcpiPsFreeOp (Arg); 892 Arg = NULL; 893 } 894 } 895 else 896 { 897 Status = AcpiPsGetNextNamepath (WalkState, ParserState, Arg, 0); 898 } 899 } 900 else 901 { 902 /* Single complex argument, nothing returned */ 903 904 WalkState->ArgCount = 1; 905 } 906 break; 907 908 909 case ARGP_DATAOBJ: 910 case ARGP_TERMARG: 911 912 /* Single complex argument, nothing returned */ 913 914 WalkState->ArgCount = 1; 915 break; 916 917 918 case ARGP_DATAOBJLIST: 919 case ARGP_TERMLIST: 920 case ARGP_OBJLIST: 921 922 if (ParserState->Aml < ParserState->PkgEnd) 923 { 924 /* Non-empty list of variable arguments, nothing returned */ 925 926 WalkState->ArgCount = ACPI_VAR_ARGS; 927 } 928 break; 929 930 931 default: 932 933 ACPI_ERROR ((AE_INFO, "Invalid ArgType: 0x%X", ArgType)); 934 Status = AE_AML_OPERAND_TYPE; 935 break; 936 } 937 938 *ReturnArg = Arg; 939 return_ACPI_STATUS (Status); 940 } 941