1 /****************************************************************************** 2 * 3 * Module Name: nspredef - Validation of ACPI predefined methods and objects 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2015, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #define ACPI_CREATE_PREDEFINED_TABLE 45 46 #include <contrib/dev/acpica/include/acpi.h> 47 #include <contrib/dev/acpica/include/accommon.h> 48 #include <contrib/dev/acpica/include/acnamesp.h> 49 #include <contrib/dev/acpica/include/acpredef.h> 50 51 52 #define _COMPONENT ACPI_NAMESPACE 53 ACPI_MODULE_NAME ("nspredef") 54 55 56 /******************************************************************************* 57 * 58 * This module validates predefined ACPI objects that appear in the namespace, 59 * at the time they are evaluated (via AcpiEvaluateObject). The purpose of this 60 * validation is to detect problems with BIOS-exposed predefined ACPI objects 61 * before the results are returned to the ACPI-related drivers. 62 * 63 * There are several areas that are validated: 64 * 65 * 1) The number of input arguments as defined by the method/object in the 66 * ASL is validated against the ACPI specification. 67 * 2) The type of the return object (if any) is validated against the ACPI 68 * specification. 69 * 3) For returned package objects, the count of package elements is 70 * validated, as well as the type of each package element. Nested 71 * packages are supported. 72 * 73 * For any problems found, a warning message is issued. 74 * 75 ******************************************************************************/ 76 77 78 /* Local prototypes */ 79 80 static ACPI_STATUS 81 AcpiNsCheckReference ( 82 ACPI_EVALUATE_INFO *Info, 83 ACPI_OPERAND_OBJECT *ReturnObject); 84 85 static UINT32 86 AcpiNsGetBitmappedType ( 87 ACPI_OPERAND_OBJECT *ReturnObject); 88 89 90 /******************************************************************************* 91 * 92 * FUNCTION: AcpiNsCheckReturnValue 93 * 94 * PARAMETERS: Node - Namespace node for the method/object 95 * Info - Method execution information block 96 * UserParamCount - Number of parameters actually passed 97 * ReturnStatus - Status from the object evaluation 98 * ReturnObjectPtr - Pointer to the object returned from the 99 * evaluation of a method or object 100 * 101 * RETURN: Status 102 * 103 * DESCRIPTION: Check the value returned from a predefined name. 104 * 105 ******************************************************************************/ 106 107 ACPI_STATUS 108 AcpiNsCheckReturnValue ( 109 ACPI_NAMESPACE_NODE *Node, 110 ACPI_EVALUATE_INFO *Info, 111 UINT32 UserParamCount, 112 ACPI_STATUS ReturnStatus, 113 ACPI_OPERAND_OBJECT **ReturnObjectPtr) 114 { 115 ACPI_STATUS Status; 116 const ACPI_PREDEFINED_INFO *Predefined; 117 118 119 /* If not a predefined name, we cannot validate the return object */ 120 121 Predefined = Info->Predefined; 122 if (!Predefined) 123 { 124 return (AE_OK); 125 } 126 127 /* 128 * If the method failed or did not actually return an object, we cannot 129 * validate the return object 130 */ 131 if ((ReturnStatus != AE_OK) && 132 (ReturnStatus != AE_CTRL_RETURN_VALUE)) 133 { 134 return (AE_OK); 135 } 136 137 /* 138 * Return value validation and possible repair. 139 * 140 * 1) Don't perform return value validation/repair if this feature 141 * has been disabled via a global option. 142 * 143 * 2) We have a return value, but if one wasn't expected, just exit, 144 * this is not a problem. For example, if the "Implicit Return" 145 * feature is enabled, methods will always return a value. 146 * 147 * 3) If the return value can be of any type, then we cannot perform 148 * any validation, just exit. 149 */ 150 if (AcpiGbl_DisableAutoRepair || 151 (!Predefined->Info.ExpectedBtypes) || 152 (Predefined->Info.ExpectedBtypes == ACPI_RTYPE_ALL)) 153 { 154 return (AE_OK); 155 } 156 157 /* 158 * Check that the type of the main return object is what is expected 159 * for this predefined name 160 */ 161 Status = AcpiNsCheckObjectType (Info, ReturnObjectPtr, 162 Predefined->Info.ExpectedBtypes, ACPI_NOT_PACKAGE_ELEMENT); 163 if (ACPI_FAILURE (Status)) 164 { 165 goto Exit; 166 } 167 168 /* 169 * 170 * 4) If there is no return value and it is optional, just return 171 * AE_OK (_WAK). 172 */ 173 if (!(*ReturnObjectPtr)) 174 { 175 goto Exit; 176 } 177 178 /* 179 * For returned Package objects, check the type of all sub-objects. 180 * Note: Package may have been newly created by call above. 181 */ 182 if ((*ReturnObjectPtr)->Common.Type == ACPI_TYPE_PACKAGE) 183 { 184 Info->ParentPackage = *ReturnObjectPtr; 185 Status = AcpiNsCheckPackage (Info, ReturnObjectPtr); 186 if (ACPI_FAILURE (Status)) 187 { 188 /* We might be able to fix some errors */ 189 190 if ((Status != AE_AML_OPERAND_TYPE) && 191 (Status != AE_AML_OPERAND_VALUE)) 192 { 193 goto Exit; 194 } 195 } 196 } 197 198 /* 199 * The return object was OK, or it was successfully repaired above. 200 * Now make some additional checks such as verifying that package 201 * objects are sorted correctly (if required) or buffer objects have 202 * the correct data width (bytes vs. dwords). These repairs are 203 * performed on a per-name basis, i.e., the code is specific to 204 * particular predefined names. 205 */ 206 Status = AcpiNsComplexRepairs (Info, Node, Status, ReturnObjectPtr); 207 208 Exit: 209 /* 210 * If the object validation failed or if we successfully repaired one 211 * or more objects, mark the parent node to suppress further warning 212 * messages during the next evaluation of the same method/object. 213 */ 214 if (ACPI_FAILURE (Status) || 215 (Info->ReturnFlags & ACPI_OBJECT_REPAIRED)) 216 { 217 Node->Flags |= ANOBJ_EVALUATED; 218 } 219 220 return (Status); 221 } 222 223 224 /******************************************************************************* 225 * 226 * FUNCTION: AcpiNsCheckObjectType 227 * 228 * PARAMETERS: Info - Method execution information block 229 * ReturnObjectPtr - Pointer to the object returned from the 230 * evaluation of a method or object 231 * ExpectedBtypes - Bitmap of expected return type(s) 232 * PackageIndex - Index of object within parent package (if 233 * applicable - ACPI_NOT_PACKAGE_ELEMENT 234 * otherwise) 235 * 236 * RETURN: Status 237 * 238 * DESCRIPTION: Check the type of the return object against the expected object 239 * type(s). Use of Btype allows multiple expected object types. 240 * 241 ******************************************************************************/ 242 243 ACPI_STATUS 244 AcpiNsCheckObjectType ( 245 ACPI_EVALUATE_INFO *Info, 246 ACPI_OPERAND_OBJECT **ReturnObjectPtr, 247 UINT32 ExpectedBtypes, 248 UINT32 PackageIndex) 249 { 250 ACPI_OPERAND_OBJECT *ReturnObject = *ReturnObjectPtr; 251 ACPI_STATUS Status = AE_OK; 252 char TypeBuffer[48]; /* Room for 5 types */ 253 254 255 /* A Namespace node should not get here, but make sure */ 256 257 if (ReturnObject && 258 ACPI_GET_DESCRIPTOR_TYPE (ReturnObject) == ACPI_DESC_TYPE_NAMED) 259 { 260 ACPI_WARN_PREDEFINED ((AE_INFO, Info->FullPathname, Info->NodeFlags, 261 "Invalid return type - Found a Namespace node [%4.4s] type %s", 262 ReturnObject->Node.Name.Ascii, 263 AcpiUtGetTypeName (ReturnObject->Node.Type))); 264 return (AE_AML_OPERAND_TYPE); 265 } 266 267 /* 268 * Convert the object type (ACPI_TYPE_xxx) to a bitmapped object type. 269 * The bitmapped type allows multiple possible return types. 270 * 271 * Note, the cases below must handle all of the possible types returned 272 * from all of the predefined names (including elements of returned 273 * packages) 274 */ 275 Info->ReturnBtype = AcpiNsGetBitmappedType (ReturnObject); 276 if (Info->ReturnBtype == ACPI_RTYPE_ANY) 277 { 278 /* Not one of the supported objects, must be incorrect */ 279 goto TypeErrorExit; 280 } 281 282 /* For reference objects, check that the reference type is correct */ 283 284 if ((Info->ReturnBtype & ExpectedBtypes) == ACPI_RTYPE_REFERENCE) 285 { 286 Status = AcpiNsCheckReference (Info, ReturnObject); 287 return (Status); 288 } 289 290 /* Attempt simple repair of the returned object if necessary */ 291 292 Status = AcpiNsSimpleRepair (Info, ExpectedBtypes, 293 PackageIndex, ReturnObjectPtr); 294 if (ACPI_SUCCESS (Status)) 295 { 296 return (AE_OK); /* Successful repair */ 297 } 298 299 300 TypeErrorExit: 301 302 /* Create a string with all expected types for this predefined object */ 303 304 AcpiUtGetExpectedReturnTypes (TypeBuffer, ExpectedBtypes); 305 306 if (!ReturnObject) 307 { 308 ACPI_WARN_PREDEFINED ((AE_INFO, Info->FullPathname, Info->NodeFlags, 309 "Expected return object of type %s", 310 TypeBuffer)); 311 } 312 else if (PackageIndex == ACPI_NOT_PACKAGE_ELEMENT) 313 { 314 ACPI_WARN_PREDEFINED ((AE_INFO, Info->FullPathname, Info->NodeFlags, 315 "Return type mismatch - found %s, expected %s", 316 AcpiUtGetObjectTypeName (ReturnObject), TypeBuffer)); 317 } 318 else 319 { 320 ACPI_WARN_PREDEFINED ((AE_INFO, Info->FullPathname, Info->NodeFlags, 321 "Return Package type mismatch at index %u - " 322 "found %s, expected %s", PackageIndex, 323 AcpiUtGetObjectTypeName (ReturnObject), TypeBuffer)); 324 } 325 326 return (AE_AML_OPERAND_TYPE); 327 } 328 329 330 /******************************************************************************* 331 * 332 * FUNCTION: AcpiNsCheckReference 333 * 334 * PARAMETERS: Info - Method execution information block 335 * ReturnObject - Object returned from the evaluation of a 336 * method or object 337 * 338 * RETURN: Status 339 * 340 * DESCRIPTION: Check a returned reference object for the correct reference 341 * type. The only reference type that can be returned from a 342 * predefined method is a named reference. All others are invalid. 343 * 344 ******************************************************************************/ 345 346 static ACPI_STATUS 347 AcpiNsCheckReference ( 348 ACPI_EVALUATE_INFO *Info, 349 ACPI_OPERAND_OBJECT *ReturnObject) 350 { 351 352 /* 353 * Check the reference object for the correct reference type (opcode). 354 * The only type of reference that can be converted to an ACPI_OBJECT is 355 * a reference to a named object (reference class: NAME) 356 */ 357 if (ReturnObject->Reference.Class == ACPI_REFCLASS_NAME) 358 { 359 return (AE_OK); 360 } 361 362 ACPI_WARN_PREDEFINED ((AE_INFO, Info->FullPathname, Info->NodeFlags, 363 "Return type mismatch - unexpected reference object type [%s] %2.2X", 364 AcpiUtGetReferenceName (ReturnObject), 365 ReturnObject->Reference.Class)); 366 367 return (AE_AML_OPERAND_TYPE); 368 } 369 370 371 /******************************************************************************* 372 * 373 * FUNCTION: AcpiNsGetBitmappedType 374 * 375 * PARAMETERS: ReturnObject - Object returned from method/obj evaluation 376 * 377 * RETURN: Object return type. ACPI_RTYPE_ANY indicates that the object 378 * type is not supported. ACPI_RTYPE_NONE indicates that no 379 * object was returned (ReturnObject is NULL). 380 * 381 * DESCRIPTION: Convert object type into a bitmapped object return type. 382 * 383 ******************************************************************************/ 384 385 static UINT32 386 AcpiNsGetBitmappedType ( 387 ACPI_OPERAND_OBJECT *ReturnObject) 388 { 389 UINT32 ReturnBtype; 390 391 392 if (!ReturnObject) 393 { 394 return (ACPI_RTYPE_NONE); 395 } 396 397 /* Map ACPI_OBJECT_TYPE to internal bitmapped type */ 398 399 switch (ReturnObject->Common.Type) 400 { 401 case ACPI_TYPE_INTEGER: 402 403 ReturnBtype = ACPI_RTYPE_INTEGER; 404 break; 405 406 case ACPI_TYPE_BUFFER: 407 408 ReturnBtype = ACPI_RTYPE_BUFFER; 409 break; 410 411 case ACPI_TYPE_STRING: 412 413 ReturnBtype = ACPI_RTYPE_STRING; 414 break; 415 416 case ACPI_TYPE_PACKAGE: 417 418 ReturnBtype = ACPI_RTYPE_PACKAGE; 419 break; 420 421 case ACPI_TYPE_LOCAL_REFERENCE: 422 423 ReturnBtype = ACPI_RTYPE_REFERENCE; 424 break; 425 426 default: 427 428 /* Not one of the supported objects, must be incorrect */ 429 430 ReturnBtype = ACPI_RTYPE_ANY; 431 break; 432 } 433 434 return (ReturnBtype); 435 } 436