1 /****************************************************************************** 2 * 3 * Module Name: hwacpi - ACPI Hardware Initialization/Mode Interface 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2013, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #define __HWACPI_C__ 45 46 #include <contrib/dev/acpica/include/acpi.h> 47 #include <contrib/dev/acpica/include/accommon.h> 48 49 50 #define _COMPONENT ACPI_HARDWARE 51 ACPI_MODULE_NAME ("hwacpi") 52 53 54 #if (!ACPI_REDUCED_HARDWARE) /* Entire module */ 55 /****************************************************************************** 56 * 57 * FUNCTION: AcpiHwSetMode 58 * 59 * PARAMETERS: Mode - SYS_MODE_ACPI or SYS_MODE_LEGACY 60 * 61 * RETURN: Status 62 * 63 * DESCRIPTION: Transitions the system into the requested mode. 64 * 65 ******************************************************************************/ 66 67 ACPI_STATUS 68 AcpiHwSetMode ( 69 UINT32 Mode) 70 { 71 72 ACPI_STATUS Status; 73 UINT32 Retry; 74 75 76 ACPI_FUNCTION_TRACE (HwSetMode); 77 78 79 /* If the Hardware Reduced flag is set, machine is always in acpi mode */ 80 81 if (AcpiGbl_ReducedHardware) 82 { 83 return_ACPI_STATUS (AE_OK); 84 } 85 86 /* 87 * ACPI 2.0 clarified that if SMI_CMD in FADT is zero, 88 * system does not support mode transition. 89 */ 90 if (!AcpiGbl_FADT.SmiCommand) 91 { 92 ACPI_ERROR ((AE_INFO, "No SMI_CMD in FADT, mode transition failed")); 93 return_ACPI_STATUS (AE_NO_HARDWARE_RESPONSE); 94 } 95 96 /* 97 * ACPI 2.0 clarified the meaning of ACPI_ENABLE and ACPI_DISABLE 98 * in FADT: If it is zero, enabling or disabling is not supported. 99 * As old systems may have used zero for mode transition, 100 * we make sure both the numbers are zero to determine these 101 * transitions are not supported. 102 */ 103 if (!AcpiGbl_FADT.AcpiEnable && !AcpiGbl_FADT.AcpiDisable) 104 { 105 ACPI_ERROR ((AE_INFO, 106 "No ACPI mode transition supported in this system " 107 "(enable/disable both zero)")); 108 return_ACPI_STATUS (AE_OK); 109 } 110 111 switch (Mode) 112 { 113 case ACPI_SYS_MODE_ACPI: 114 115 /* BIOS should have disabled ALL fixed and GP events */ 116 117 Status = AcpiHwWritePort (AcpiGbl_FADT.SmiCommand, 118 (UINT32) AcpiGbl_FADT.AcpiEnable, 8); 119 ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Attempting to enable ACPI mode\n")); 120 break; 121 122 case ACPI_SYS_MODE_LEGACY: 123 124 /* 125 * BIOS should clear all fixed status bits and restore fixed event 126 * enable bits to default 127 */ 128 Status = AcpiHwWritePort (AcpiGbl_FADT.SmiCommand, 129 (UINT32) AcpiGbl_FADT.AcpiDisable, 8); 130 ACPI_DEBUG_PRINT ((ACPI_DB_INFO, 131 "Attempting to enable Legacy (non-ACPI) mode\n")); 132 break; 133 134 default: 135 return_ACPI_STATUS (AE_BAD_PARAMETER); 136 } 137 138 if (ACPI_FAILURE (Status)) 139 { 140 ACPI_EXCEPTION ((AE_INFO, Status, 141 "Could not write ACPI mode change")); 142 return_ACPI_STATUS (Status); 143 } 144 145 /* 146 * Some hardware takes a LONG time to switch modes. Give them 3 sec to 147 * do so, but allow faster systems to proceed more quickly. 148 */ 149 Retry = 3000; 150 while (Retry) 151 { 152 if (AcpiHwGetMode () == Mode) 153 { 154 ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Mode %X successfully enabled\n", 155 Mode)); 156 return_ACPI_STATUS (AE_OK); 157 } 158 AcpiOsStall (ACPI_USEC_PER_MSEC); 159 Retry--; 160 } 161 162 ACPI_ERROR ((AE_INFO, "Hardware did not change modes")); 163 return_ACPI_STATUS (AE_NO_HARDWARE_RESPONSE); 164 } 165 166 167 /******************************************************************************* 168 * 169 * FUNCTION: AcpiHwGetMode 170 * 171 * PARAMETERS: none 172 * 173 * RETURN: SYS_MODE_ACPI or SYS_MODE_LEGACY 174 * 175 * DESCRIPTION: Return current operating state of system. Determined by 176 * querying the SCI_EN bit. 177 * 178 ******************************************************************************/ 179 180 UINT32 181 AcpiHwGetMode ( 182 void) 183 { 184 ACPI_STATUS Status; 185 UINT32 Value; 186 187 188 ACPI_FUNCTION_TRACE (HwGetMode); 189 190 191 /* If the Hardware Reduced flag is set, machine is always in acpi mode */ 192 193 if (AcpiGbl_ReducedHardware) 194 { 195 return_UINT32 (ACPI_SYS_MODE_ACPI); 196 } 197 198 /* 199 * ACPI 2.0 clarified that if SMI_CMD in FADT is zero, 200 * system does not support mode transition. 201 */ 202 if (!AcpiGbl_FADT.SmiCommand) 203 { 204 return_UINT32 (ACPI_SYS_MODE_ACPI); 205 } 206 207 Status = AcpiReadBitRegister (ACPI_BITREG_SCI_ENABLE, &Value); 208 if (ACPI_FAILURE (Status)) 209 { 210 return_UINT32 (ACPI_SYS_MODE_LEGACY); 211 } 212 213 if (Value) 214 { 215 return_UINT32 (ACPI_SYS_MODE_ACPI); 216 } 217 else 218 { 219 return_UINT32 (ACPI_SYS_MODE_LEGACY); 220 } 221 } 222 223 #endif /* !ACPI_REDUCED_HARDWARE */ 224