1 /****************************************************************************** 2 * 3 * Module Name: exregion - ACPI default OpRegion (address space) handlers 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2015, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #include <contrib/dev/acpica/include/acpi.h> 45 #include <contrib/dev/acpica/include/accommon.h> 46 #include <contrib/dev/acpica/include/acinterp.h> 47 48 49 #define _COMPONENT ACPI_EXECUTER 50 ACPI_MODULE_NAME ("exregion") 51 52 53 /******************************************************************************* 54 * 55 * FUNCTION: AcpiExSystemMemorySpaceHandler 56 * 57 * PARAMETERS: Function - Read or Write operation 58 * Address - Where in the space to read or write 59 * BitWidth - Field width in bits (8, 16, or 32) 60 * Value - Pointer to in or out value 61 * HandlerContext - Pointer to Handler's context 62 * RegionContext - Pointer to context specific to the 63 * accessed region 64 * 65 * RETURN: Status 66 * 67 * DESCRIPTION: Handler for the System Memory address space (Op Region) 68 * 69 ******************************************************************************/ 70 71 ACPI_STATUS 72 AcpiExSystemMemorySpaceHandler ( 73 UINT32 Function, 74 ACPI_PHYSICAL_ADDRESS Address, 75 UINT32 BitWidth, 76 UINT64 *Value, 77 void *HandlerContext, 78 void *RegionContext) 79 { 80 ACPI_STATUS Status = AE_OK; 81 void *LogicalAddrPtr = NULL; 82 ACPI_MEM_SPACE_CONTEXT *MemInfo = RegionContext; 83 UINT32 Length; 84 ACPI_SIZE MapLength; 85 ACPI_SIZE PageBoundaryMapLength; 86 #ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED 87 UINT32 Remainder; 88 #endif 89 90 91 ACPI_FUNCTION_TRACE (ExSystemMemorySpaceHandler); 92 93 94 /* Validate and translate the bit width */ 95 96 switch (BitWidth) 97 { 98 case 8: 99 100 Length = 1; 101 break; 102 103 case 16: 104 105 Length = 2; 106 break; 107 108 case 32: 109 110 Length = 4; 111 break; 112 113 case 64: 114 115 Length = 8; 116 break; 117 118 default: 119 120 ACPI_ERROR ((AE_INFO, "Invalid SystemMemory width %u", 121 BitWidth)); 122 return_ACPI_STATUS (AE_AML_OPERAND_VALUE); 123 } 124 125 #ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED 126 /* 127 * Hardware does not support non-aligned data transfers, we must verify 128 * the request. 129 */ 130 (void) AcpiUtShortDivide ((UINT64) Address, Length, NULL, &Remainder); 131 if (Remainder != 0) 132 { 133 return_ACPI_STATUS (AE_AML_ALIGNMENT); 134 } 135 #endif 136 137 /* 138 * Does the request fit into the cached memory mapping? 139 * Is 1) Address below the current mapping? OR 140 * 2) Address beyond the current mapping? 141 */ 142 if ((Address < MemInfo->MappedPhysicalAddress) || 143 (((UINT64) Address + Length) > 144 ((UINT64) 145 MemInfo->MappedPhysicalAddress + MemInfo->MappedLength))) 146 { 147 /* 148 * The request cannot be resolved by the current memory mapping; 149 * Delete the existing mapping and create a new one. 150 */ 151 if (MemInfo->MappedLength) 152 { 153 /* Valid mapping, delete it */ 154 155 AcpiOsUnmapMemory (MemInfo->MappedLogicalAddress, 156 MemInfo->MappedLength); 157 } 158 159 /* 160 * October 2009: Attempt to map from the requested address to the 161 * end of the region. However, we will never map more than one 162 * page, nor will we cross a page boundary. 163 */ 164 MapLength = (ACPI_SIZE) 165 ((MemInfo->Address + MemInfo->Length) - Address); 166 167 /* 168 * If mapping the entire remaining portion of the region will cross 169 * a page boundary, just map up to the page boundary, do not cross. 170 * On some systems, crossing a page boundary while mapping regions 171 * can cause warnings if the pages have different attributes 172 * due to resource management. 173 * 174 * This has the added benefit of constraining a single mapping to 175 * one page, which is similar to the original code that used a 4k 176 * maximum window. 177 */ 178 PageBoundaryMapLength = (ACPI_SIZE) 179 (ACPI_ROUND_UP (Address, ACPI_DEFAULT_PAGE_SIZE) - Address); 180 if (PageBoundaryMapLength == 0) 181 { 182 PageBoundaryMapLength = ACPI_DEFAULT_PAGE_SIZE; 183 } 184 185 if (MapLength > PageBoundaryMapLength) 186 { 187 MapLength = PageBoundaryMapLength; 188 } 189 190 /* Create a new mapping starting at the address given */ 191 192 MemInfo->MappedLogicalAddress = AcpiOsMapMemory (Address, MapLength); 193 if (!MemInfo->MappedLogicalAddress) 194 { 195 ACPI_ERROR ((AE_INFO, 196 "Could not map memory at 0x%8.8X%8.8X, size %u", 197 ACPI_FORMAT_UINT64 (Address), (UINT32) MapLength)); 198 MemInfo->MappedLength = 0; 199 return_ACPI_STATUS (AE_NO_MEMORY); 200 } 201 202 /* Save the physical address and mapping size */ 203 204 MemInfo->MappedPhysicalAddress = Address; 205 MemInfo->MappedLength = MapLength; 206 } 207 208 /* 209 * Generate a logical pointer corresponding to the address we want to 210 * access 211 */ 212 LogicalAddrPtr = MemInfo->MappedLogicalAddress + 213 ((UINT64) Address - (UINT64) MemInfo->MappedPhysicalAddress); 214 215 ACPI_DEBUG_PRINT ((ACPI_DB_INFO, 216 "System-Memory (width %u) R/W %u Address=%8.8X%8.8X\n", 217 BitWidth, Function, ACPI_FORMAT_UINT64 (Address))); 218 219 /* 220 * Perform the memory read or write 221 * 222 * Note: For machines that do not support non-aligned transfers, the target 223 * address was checked for alignment above. We do not attempt to break the 224 * transfer up into smaller (byte-size) chunks because the AML specifically 225 * asked for a transfer width that the hardware may require. 226 */ 227 switch (Function) 228 { 229 case ACPI_READ: 230 231 *Value = 0; 232 switch (BitWidth) 233 { 234 case 8: 235 236 *Value = (UINT64) ACPI_GET8 (LogicalAddrPtr); 237 break; 238 239 case 16: 240 241 *Value = (UINT64) ACPI_GET16 (LogicalAddrPtr); 242 break; 243 244 case 32: 245 246 *Value = (UINT64) ACPI_GET32 (LogicalAddrPtr); 247 break; 248 249 case 64: 250 251 *Value = (UINT64) ACPI_GET64 (LogicalAddrPtr); 252 break; 253 254 default: 255 256 /* BitWidth was already validated */ 257 258 break; 259 } 260 break; 261 262 case ACPI_WRITE: 263 264 switch (BitWidth) 265 { 266 case 8: 267 268 ACPI_SET8 (LogicalAddrPtr, *Value); 269 break; 270 271 case 16: 272 273 ACPI_SET16 (LogicalAddrPtr, *Value); 274 break; 275 276 case 32: 277 278 ACPI_SET32 (LogicalAddrPtr, *Value); 279 break; 280 281 case 64: 282 283 ACPI_SET64 (LogicalAddrPtr, *Value); 284 break; 285 286 default: 287 288 /* BitWidth was already validated */ 289 290 break; 291 } 292 break; 293 294 default: 295 296 Status = AE_BAD_PARAMETER; 297 break; 298 } 299 300 return_ACPI_STATUS (Status); 301 } 302 303 304 /******************************************************************************* 305 * 306 * FUNCTION: AcpiExSystemIoSpaceHandler 307 * 308 * PARAMETERS: Function - Read or Write operation 309 * Address - Where in the space to read or write 310 * BitWidth - Field width in bits (8, 16, or 32) 311 * Value - Pointer to in or out value 312 * HandlerContext - Pointer to Handler's context 313 * RegionContext - Pointer to context specific to the 314 * accessed region 315 * 316 * RETURN: Status 317 * 318 * DESCRIPTION: Handler for the System IO address space (Op Region) 319 * 320 ******************************************************************************/ 321 322 ACPI_STATUS 323 AcpiExSystemIoSpaceHandler ( 324 UINT32 Function, 325 ACPI_PHYSICAL_ADDRESS Address, 326 UINT32 BitWidth, 327 UINT64 *Value, 328 void *HandlerContext, 329 void *RegionContext) 330 { 331 ACPI_STATUS Status = AE_OK; 332 UINT32 Value32; 333 334 335 ACPI_FUNCTION_TRACE (ExSystemIoSpaceHandler); 336 337 338 ACPI_DEBUG_PRINT ((ACPI_DB_INFO, 339 "System-IO (width %u) R/W %u Address=%8.8X%8.8X\n", 340 BitWidth, Function, ACPI_FORMAT_UINT64 (Address))); 341 342 /* Decode the function parameter */ 343 344 switch (Function) 345 { 346 case ACPI_READ: 347 348 Status = AcpiHwReadPort ((ACPI_IO_ADDRESS) Address, 349 &Value32, BitWidth); 350 *Value = Value32; 351 break; 352 353 case ACPI_WRITE: 354 355 Status = AcpiHwWritePort ((ACPI_IO_ADDRESS) Address, 356 (UINT32) *Value, BitWidth); 357 break; 358 359 default: 360 361 Status = AE_BAD_PARAMETER; 362 break; 363 } 364 365 return_ACPI_STATUS (Status); 366 } 367 368 369 /******************************************************************************* 370 * 371 * FUNCTION: AcpiExPciConfigSpaceHandler 372 * 373 * PARAMETERS: Function - Read or Write operation 374 * Address - Where in the space to read or write 375 * BitWidth - Field width in bits (8, 16, or 32) 376 * Value - Pointer to in or out value 377 * HandlerContext - Pointer to Handler's context 378 * RegionContext - Pointer to context specific to the 379 * accessed region 380 * 381 * RETURN: Status 382 * 383 * DESCRIPTION: Handler for the PCI Config address space (Op Region) 384 * 385 ******************************************************************************/ 386 387 ACPI_STATUS 388 AcpiExPciConfigSpaceHandler ( 389 UINT32 Function, 390 ACPI_PHYSICAL_ADDRESS Address, 391 UINT32 BitWidth, 392 UINT64 *Value, 393 void *HandlerContext, 394 void *RegionContext) 395 { 396 ACPI_STATUS Status = AE_OK; 397 ACPI_PCI_ID *PciId; 398 UINT16 PciRegister; 399 400 401 ACPI_FUNCTION_TRACE (ExPciConfigSpaceHandler); 402 403 404 /* 405 * The arguments to AcpiOs(Read|Write)PciConfiguration are: 406 * 407 * PciSegment is the PCI bus segment range 0-31 408 * PciBus is the PCI bus number range 0-255 409 * PciDevice is the PCI device number range 0-31 410 * PciFunction is the PCI device function number 411 * PciRegister is the Config space register range 0-255 bytes 412 * 413 * Value - input value for write, output address for read 414 * 415 */ 416 PciId = (ACPI_PCI_ID *) RegionContext; 417 PciRegister = (UINT16) (UINT32) Address; 418 419 ACPI_DEBUG_PRINT ((ACPI_DB_INFO, 420 "Pci-Config %u (%u) Seg(%04x) Bus(%04x) Dev(%04x) Func(%04x) Reg(%04x)\n", 421 Function, BitWidth, PciId->Segment, PciId->Bus, PciId->Device, 422 PciId->Function, PciRegister)); 423 424 switch (Function) 425 { 426 case ACPI_READ: 427 428 *Value = 0; 429 Status = AcpiOsReadPciConfiguration (PciId, PciRegister, 430 Value, BitWidth); 431 break; 432 433 case ACPI_WRITE: 434 435 Status = AcpiOsWritePciConfiguration (PciId, PciRegister, 436 *Value, BitWidth); 437 break; 438 439 default: 440 441 Status = AE_BAD_PARAMETER; 442 break; 443 } 444 445 return_ACPI_STATUS (Status); 446 } 447 448 449 /******************************************************************************* 450 * 451 * FUNCTION: AcpiExCmosSpaceHandler 452 * 453 * PARAMETERS: Function - Read or Write operation 454 * Address - Where in the space to read or write 455 * BitWidth - Field width in bits (8, 16, or 32) 456 * Value - Pointer to in or out value 457 * HandlerContext - Pointer to Handler's context 458 * RegionContext - Pointer to context specific to the 459 * accessed region 460 * 461 * RETURN: Status 462 * 463 * DESCRIPTION: Handler for the CMOS address space (Op Region) 464 * 465 ******************************************************************************/ 466 467 ACPI_STATUS 468 AcpiExCmosSpaceHandler ( 469 UINT32 Function, 470 ACPI_PHYSICAL_ADDRESS Address, 471 UINT32 BitWidth, 472 UINT64 *Value, 473 void *HandlerContext, 474 void *RegionContext) 475 { 476 ACPI_STATUS Status = AE_OK; 477 478 479 ACPI_FUNCTION_TRACE (ExCmosSpaceHandler); 480 481 482 return_ACPI_STATUS (Status); 483 } 484 485 486 /******************************************************************************* 487 * 488 * FUNCTION: AcpiExPciBarSpaceHandler 489 * 490 * PARAMETERS: Function - Read or Write operation 491 * Address - Where in the space to read or write 492 * BitWidth - Field width in bits (8, 16, or 32) 493 * Value - Pointer to in or out value 494 * HandlerContext - Pointer to Handler's context 495 * RegionContext - Pointer to context specific to the 496 * accessed region 497 * 498 * RETURN: Status 499 * 500 * DESCRIPTION: Handler for the PCI BarTarget address space (Op Region) 501 * 502 ******************************************************************************/ 503 504 ACPI_STATUS 505 AcpiExPciBarSpaceHandler ( 506 UINT32 Function, 507 ACPI_PHYSICAL_ADDRESS Address, 508 UINT32 BitWidth, 509 UINT64 *Value, 510 void *HandlerContext, 511 void *RegionContext) 512 { 513 ACPI_STATUS Status = AE_OK; 514 515 516 ACPI_FUNCTION_TRACE (ExPciBarSpaceHandler); 517 518 519 return_ACPI_STATUS (Status); 520 } 521 522 523 /******************************************************************************* 524 * 525 * FUNCTION: AcpiExDataTableSpaceHandler 526 * 527 * PARAMETERS: Function - Read or Write operation 528 * Address - Where in the space to read or write 529 * BitWidth - Field width in bits (8, 16, or 32) 530 * Value - Pointer to in or out value 531 * HandlerContext - Pointer to Handler's context 532 * RegionContext - Pointer to context specific to the 533 * accessed region 534 * 535 * RETURN: Status 536 * 537 * DESCRIPTION: Handler for the Data Table address space (Op Region) 538 * 539 ******************************************************************************/ 540 541 ACPI_STATUS 542 AcpiExDataTableSpaceHandler ( 543 UINT32 Function, 544 ACPI_PHYSICAL_ADDRESS Address, 545 UINT32 BitWidth, 546 UINT64 *Value, 547 void *HandlerContext, 548 void *RegionContext) 549 { 550 ACPI_FUNCTION_TRACE (ExDataTableSpaceHandler); 551 552 553 /* 554 * Perform the memory read or write. The BitWidth was already 555 * validated. 556 */ 557 switch (Function) 558 { 559 case ACPI_READ: 560 561 memcpy (ACPI_CAST_PTR (char, Value), ACPI_PHYSADDR_TO_PTR (Address), 562 ACPI_DIV_8 (BitWidth)); 563 break; 564 565 case ACPI_WRITE: 566 567 memcpy (ACPI_PHYSADDR_TO_PTR (Address), ACPI_CAST_PTR (char, Value), 568 ACPI_DIV_8 (BitWidth)); 569 break; 570 571 default: 572 573 return_ACPI_STATUS (AE_BAD_PARAMETER); 574 } 575 576 return_ACPI_STATUS (AE_OK); 577 } 578