1 /****************************************************************************** 2 * 3 * Module Name: exprep - ACPI AML field prep utilities 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2016, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #include <contrib/dev/acpica/include/acpi.h> 45 #include <contrib/dev/acpica/include/accommon.h> 46 #include <contrib/dev/acpica/include/acinterp.h> 47 #include <contrib/dev/acpica/include/amlcode.h> 48 #include <contrib/dev/acpica/include/acnamesp.h> 49 #include <contrib/dev/acpica/include/acdispat.h> 50 51 52 #define _COMPONENT ACPI_EXECUTER 53 ACPI_MODULE_NAME ("exprep") 54 55 /* Local prototypes */ 56 57 static UINT32 58 AcpiExDecodeFieldAccess ( 59 ACPI_OPERAND_OBJECT *ObjDesc, 60 UINT8 FieldFlags, 61 UINT32 *ReturnByteAlignment); 62 63 64 #ifdef ACPI_UNDER_DEVELOPMENT 65 66 static UINT32 67 AcpiExGenerateAccess ( 68 UINT32 FieldBitOffset, 69 UINT32 FieldBitLength, 70 UINT32 RegionLength); 71 72 73 /******************************************************************************* 74 * 75 * FUNCTION: AcpiExGenerateAccess 76 * 77 * PARAMETERS: FieldBitOffset - Start of field within parent region/buffer 78 * FieldBitLength - Length of field in bits 79 * RegionLength - Length of parent in bytes 80 * 81 * RETURN: Field granularity (8, 16, 32 or 64) and 82 * ByteAlignment (1, 2, 3, or 4) 83 * 84 * DESCRIPTION: Generate an optimal access width for fields defined with the 85 * AnyAcc keyword. 86 * 87 * NOTE: Need to have the RegionLength in order to check for boundary 88 * conditions (end-of-region). However, the RegionLength is a deferred 89 * operation. Therefore, to complete this implementation, the generation 90 * of this access width must be deferred until the region length has 91 * been evaluated. 92 * 93 ******************************************************************************/ 94 95 static UINT32 96 AcpiExGenerateAccess ( 97 UINT32 FieldBitOffset, 98 UINT32 FieldBitLength, 99 UINT32 RegionLength) 100 { 101 UINT32 FieldByteLength; 102 UINT32 FieldByteOffset; 103 UINT32 FieldByteEndOffset; 104 UINT32 AccessByteWidth; 105 UINT32 FieldStartOffset; 106 UINT32 FieldEndOffset; 107 UINT32 MinimumAccessWidth = 0xFFFFFFFF; 108 UINT32 MinimumAccesses = 0xFFFFFFFF; 109 UINT32 Accesses; 110 111 112 ACPI_FUNCTION_TRACE (ExGenerateAccess); 113 114 115 /* Round Field start offset and length to "minimal" byte boundaries */ 116 117 FieldByteOffset = ACPI_DIV_8 ( 118 ACPI_ROUND_DOWN (FieldBitOffset, 8)); 119 120 FieldByteEndOffset = ACPI_DIV_8 ( 121 ACPI_ROUND_UP (FieldBitLength + FieldBitOffset, 8)); 122 123 FieldByteLength = FieldByteEndOffset - FieldByteOffset; 124 125 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, 126 "Bit length %u, Bit offset %u\n", 127 FieldBitLength, FieldBitOffset)); 128 129 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, 130 "Byte Length %u, Byte Offset %u, End Offset %u\n", 131 FieldByteLength, FieldByteOffset, FieldByteEndOffset)); 132 133 /* 134 * Iterative search for the maximum access width that is both aligned 135 * and does not go beyond the end of the region 136 * 137 * Start at ByteAcc and work upwards to QwordAcc max. (1,2,4,8 bytes) 138 */ 139 for (AccessByteWidth = 1; AccessByteWidth <= 8; AccessByteWidth <<= 1) 140 { 141 /* 142 * 1) Round end offset up to next access boundary and make sure that 143 * this does not go beyond the end of the parent region. 144 * 2) When the Access width is greater than the FieldByteLength, we 145 * are done. (This does not optimize for the perfectly aligned 146 * case yet). 147 */ 148 if (ACPI_ROUND_UP (FieldByteEndOffset, AccessByteWidth) <= 149 RegionLength) 150 { 151 FieldStartOffset = 152 ACPI_ROUND_DOWN (FieldByteOffset, AccessByteWidth) / 153 AccessByteWidth; 154 155 FieldEndOffset = 156 ACPI_ROUND_UP ((FieldByteLength + FieldByteOffset), 157 AccessByteWidth) / AccessByteWidth; 158 159 Accesses = FieldEndOffset - FieldStartOffset; 160 161 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, 162 "AccessWidth %u end is within region\n", AccessByteWidth)); 163 164 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, 165 "Field Start %u, Field End %u -- requires %u accesses\n", 166 FieldStartOffset, FieldEndOffset, Accesses)); 167 168 /* Single access is optimal */ 169 170 if (Accesses <= 1) 171 { 172 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, 173 "Entire field can be accessed " 174 "with one operation of size %u\n", 175 AccessByteWidth)); 176 return_VALUE (AccessByteWidth); 177 } 178 179 /* 180 * Fits in the region, but requires more than one read/write. 181 * try the next wider access on next iteration 182 */ 183 if (Accesses < MinimumAccesses) 184 { 185 MinimumAccesses = Accesses; 186 MinimumAccessWidth = AccessByteWidth; 187 } 188 } 189 else 190 { 191 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, 192 "AccessWidth %u end is NOT within region\n", 193 AccessByteWidth)); 194 if (AccessByteWidth == 1) 195 { 196 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, 197 "Field goes beyond end-of-region!\n")); 198 199 /* Field does not fit in the region at all */ 200 201 return_VALUE (0); 202 } 203 204 /* 205 * This width goes beyond the end-of-region, back off to 206 * previous access 207 */ 208 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, 209 "Backing off to previous optimal access width of %u\n", 210 MinimumAccessWidth)); 211 return_VALUE (MinimumAccessWidth); 212 } 213 } 214 215 /* 216 * Could not read/write field with one operation, 217 * just use max access width 218 */ 219 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, 220 "Cannot access field in one operation, using width 8\n")); 221 222 return_VALUE (8); 223 } 224 #endif /* ACPI_UNDER_DEVELOPMENT */ 225 226 227 /******************************************************************************* 228 * 229 * FUNCTION: AcpiExDecodeFieldAccess 230 * 231 * PARAMETERS: ObjDesc - Field object 232 * FieldFlags - Encoded fieldflags (contains access bits) 233 * ReturnByteAlignment - Where the byte alignment is returned 234 * 235 * RETURN: Field granularity (8, 16, 32 or 64) and 236 * ByteAlignment (1, 2, 3, or 4) 237 * 238 * DESCRIPTION: Decode the AccessType bits of a field definition. 239 * 240 ******************************************************************************/ 241 242 static UINT32 243 AcpiExDecodeFieldAccess ( 244 ACPI_OPERAND_OBJECT *ObjDesc, 245 UINT8 FieldFlags, 246 UINT32 *ReturnByteAlignment) 247 { 248 UINT32 Access; 249 UINT32 ByteAlignment; 250 UINT32 BitLength; 251 252 253 ACPI_FUNCTION_TRACE (ExDecodeFieldAccess); 254 255 256 Access = (FieldFlags & AML_FIELD_ACCESS_TYPE_MASK); 257 258 switch (Access) 259 { 260 case AML_FIELD_ACCESS_ANY: 261 262 #ifdef ACPI_UNDER_DEVELOPMENT 263 ByteAlignment = 264 AcpiExGenerateAccess (ObjDesc->CommonField.StartFieldBitOffset, 265 ObjDesc->CommonField.BitLength, 266 0xFFFFFFFF /* Temp until we pass RegionLength as parameter */); 267 BitLength = ByteAlignment * 8; 268 #endif 269 270 ByteAlignment = 1; 271 BitLength = 8; 272 break; 273 274 case AML_FIELD_ACCESS_BYTE: 275 case AML_FIELD_ACCESS_BUFFER: /* ACPI 2.0 (SMBus Buffer) */ 276 277 ByteAlignment = 1; 278 BitLength = 8; 279 break; 280 281 case AML_FIELD_ACCESS_WORD: 282 283 ByteAlignment = 2; 284 BitLength = 16; 285 break; 286 287 case AML_FIELD_ACCESS_DWORD: 288 289 ByteAlignment = 4; 290 BitLength = 32; 291 break; 292 293 case AML_FIELD_ACCESS_QWORD: /* ACPI 2.0 */ 294 295 ByteAlignment = 8; 296 BitLength = 64; 297 break; 298 299 default: 300 301 /* Invalid field access type */ 302 303 ACPI_ERROR ((AE_INFO, 304 "Unknown field access type 0x%X", 305 Access)); 306 307 return_UINT32 (0); 308 } 309 310 if (ObjDesc->Common.Type == ACPI_TYPE_BUFFER_FIELD) 311 { 312 /* 313 * BufferField access can be on any byte boundary, so the 314 * ByteAlignment is always 1 byte -- regardless of any ByteAlignment 315 * implied by the field access type. 316 */ 317 ByteAlignment = 1; 318 } 319 320 *ReturnByteAlignment = ByteAlignment; 321 return_UINT32 (BitLength); 322 } 323 324 325 /******************************************************************************* 326 * 327 * FUNCTION: AcpiExPrepCommonFieldObject 328 * 329 * PARAMETERS: ObjDesc - The field object 330 * FieldFlags - Access, LockRule, and UpdateRule. 331 * The format of a FieldFlag is described 332 * in the ACPI specification 333 * FieldAttribute - Special attributes (not used) 334 * FieldBitPosition - Field start position 335 * FieldBitLength - Field length in number of bits 336 * 337 * RETURN: Status 338 * 339 * DESCRIPTION: Initialize the areas of the field object that are common 340 * to the various types of fields. Note: This is very "sensitive" 341 * code because we are solving the general case for field 342 * alignment. 343 * 344 ******************************************************************************/ 345 346 ACPI_STATUS 347 AcpiExPrepCommonFieldObject ( 348 ACPI_OPERAND_OBJECT *ObjDesc, 349 UINT8 FieldFlags, 350 UINT8 FieldAttribute, 351 UINT32 FieldBitPosition, 352 UINT32 FieldBitLength) 353 { 354 UINT32 AccessBitWidth; 355 UINT32 ByteAlignment; 356 UINT32 NearestByteAddress; 357 358 359 ACPI_FUNCTION_TRACE (ExPrepCommonFieldObject); 360 361 362 /* 363 * Note: the structure being initialized is the 364 * ACPI_COMMON_FIELD_INFO; No structure fields outside of the common 365 * area are initialized by this procedure. 366 */ 367 ObjDesc->CommonField.FieldFlags = FieldFlags; 368 ObjDesc->CommonField.Attribute = FieldAttribute; 369 ObjDesc->CommonField.BitLength = FieldBitLength; 370 371 /* 372 * Decode the access type so we can compute offsets. The access type gives 373 * two pieces of information - the width of each field access and the 374 * necessary ByteAlignment (address granularity) of the access. 375 * 376 * For AnyAcc, the AccessBitWidth is the largest width that is both 377 * necessary and possible in an attempt to access the whole field in one 378 * I/O operation. However, for AnyAcc, the ByteAlignment is always one 379 * byte. 380 * 381 * For all Buffer Fields, the ByteAlignment is always one byte. 382 * 383 * For all other access types (Byte, Word, Dword, Qword), the Bitwidth is 384 * the same (equivalent) as the ByteAlignment. 385 */ 386 AccessBitWidth = AcpiExDecodeFieldAccess ( 387 ObjDesc, FieldFlags, &ByteAlignment); 388 if (!AccessBitWidth) 389 { 390 return_ACPI_STATUS (AE_AML_OPERAND_VALUE); 391 } 392 393 /* Setup width (access granularity) fields (values are: 1, 2, 4, 8) */ 394 395 ObjDesc->CommonField.AccessByteWidth = (UINT8) 396 ACPI_DIV_8 (AccessBitWidth); 397 398 /* 399 * BaseByteOffset is the address of the start of the field within the 400 * region. It is the byte address of the first *datum* (field-width data 401 * unit) of the field. (i.e., the first datum that contains at least the 402 * first *bit* of the field.) 403 * 404 * Note: ByteAlignment is always either equal to the AccessBitWidth or 8 405 * (Byte access), and it defines the addressing granularity of the parent 406 * region or buffer. 407 */ 408 NearestByteAddress = 409 ACPI_ROUND_BITS_DOWN_TO_BYTES (FieldBitPosition); 410 ObjDesc->CommonField.BaseByteOffset = (UINT32) 411 ACPI_ROUND_DOWN (NearestByteAddress, ByteAlignment); 412 413 /* 414 * StartFieldBitOffset is the offset of the first bit of the field within 415 * a field datum. 416 */ 417 ObjDesc->CommonField.StartFieldBitOffset = (UINT8) 418 (FieldBitPosition - ACPI_MUL_8 (ObjDesc->CommonField.BaseByteOffset)); 419 420 return_ACPI_STATUS (AE_OK); 421 } 422 423 424 /******************************************************************************* 425 * 426 * FUNCTION: AcpiExPrepFieldValue 427 * 428 * PARAMETERS: Info - Contains all field creation info 429 * 430 * RETURN: Status 431 * 432 * DESCRIPTION: Construct an object of type ACPI_OPERAND_OBJECT with a 433 * subtype of DefField and connect it to the parent Node. 434 * 435 ******************************************************************************/ 436 437 ACPI_STATUS 438 AcpiExPrepFieldValue ( 439 ACPI_CREATE_FIELD_INFO *Info) 440 { 441 ACPI_OPERAND_OBJECT *ObjDesc; 442 ACPI_OPERAND_OBJECT *SecondDesc = NULL; 443 ACPI_STATUS Status; 444 UINT32 AccessByteWidth; 445 UINT32 Type; 446 447 448 ACPI_FUNCTION_TRACE (ExPrepFieldValue); 449 450 451 /* Parameter validation */ 452 453 if (Info->FieldType != ACPI_TYPE_LOCAL_INDEX_FIELD) 454 { 455 if (!Info->RegionNode) 456 { 457 ACPI_ERROR ((AE_INFO, "Null RegionNode")); 458 return_ACPI_STATUS (AE_AML_NO_OPERAND); 459 } 460 461 Type = AcpiNsGetType (Info->RegionNode); 462 if (Type != ACPI_TYPE_REGION) 463 { 464 ACPI_ERROR ((AE_INFO, "Needed Region, found type 0x%X (%s)", 465 Type, AcpiUtGetTypeName (Type))); 466 467 return_ACPI_STATUS (AE_AML_OPERAND_TYPE); 468 } 469 } 470 471 /* Allocate a new field object */ 472 473 ObjDesc = AcpiUtCreateInternalObject (Info->FieldType); 474 if (!ObjDesc) 475 { 476 return_ACPI_STATUS (AE_NO_MEMORY); 477 } 478 479 /* Initialize areas of the object that are common to all fields */ 480 481 ObjDesc->CommonField.Node = Info->FieldNode; 482 Status = AcpiExPrepCommonFieldObject (ObjDesc, 483 Info->FieldFlags, Info->Attribute, 484 Info->FieldBitPosition, Info->FieldBitLength); 485 if (ACPI_FAILURE (Status)) 486 { 487 AcpiUtDeleteObjectDesc (ObjDesc); 488 return_ACPI_STATUS (Status); 489 } 490 491 /* Initialize areas of the object that are specific to the field type */ 492 493 switch (Info->FieldType) 494 { 495 case ACPI_TYPE_LOCAL_REGION_FIELD: 496 497 ObjDesc->Field.RegionObj = AcpiNsGetAttachedObject (Info->RegionNode); 498 499 /* Fields specific to GenericSerialBus fields */ 500 501 ObjDesc->Field.AccessLength = Info->AccessLength; 502 503 if (Info->ConnectionNode) 504 { 505 SecondDesc = Info->ConnectionNode->Object; 506 if (!(SecondDesc->Common.Flags & AOPOBJ_DATA_VALID)) 507 { 508 Status = AcpiDsGetBufferArguments (SecondDesc); 509 if (ACPI_FAILURE (Status)) 510 { 511 AcpiUtDeleteObjectDesc (ObjDesc); 512 return_ACPI_STATUS (Status); 513 } 514 } 515 516 ObjDesc->Field.ResourceBuffer = 517 SecondDesc->Buffer.Pointer; 518 ObjDesc->Field.ResourceLength = 519 (UINT16) SecondDesc->Buffer.Length; 520 } 521 else if (Info->ResourceBuffer) 522 { 523 ObjDesc->Field.ResourceBuffer = Info->ResourceBuffer; 524 ObjDesc->Field.ResourceLength = Info->ResourceLength; 525 } 526 527 ObjDesc->Field.PinNumberIndex = Info->PinNumberIndex; 528 529 /* Allow full data read from EC address space */ 530 531 if ((ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_EC) && 532 (ObjDesc->CommonField.BitLength > 8)) 533 { 534 AccessByteWidth = ACPI_ROUND_BITS_UP_TO_BYTES ( 535 ObjDesc->CommonField.BitLength); 536 537 /* Maximum byte width supported is 255 */ 538 539 if (AccessByteWidth < 256) 540 { 541 ObjDesc->CommonField.AccessByteWidth = 542 (UINT8) AccessByteWidth; 543 } 544 } 545 546 /* An additional reference for the container */ 547 548 AcpiUtAddReference (ObjDesc->Field.RegionObj); 549 550 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, 551 "RegionField: BitOff %X, Off %X, Gran %X, Region %p\n", 552 ObjDesc->Field.StartFieldBitOffset, 553 ObjDesc->Field.BaseByteOffset, 554 ObjDesc->Field.AccessByteWidth, 555 ObjDesc->Field.RegionObj)); 556 break; 557 558 case ACPI_TYPE_LOCAL_BANK_FIELD: 559 560 ObjDesc->BankField.Value = Info->BankValue; 561 ObjDesc->BankField.RegionObj = 562 AcpiNsGetAttachedObject (Info->RegionNode); 563 ObjDesc->BankField.BankObj = 564 AcpiNsGetAttachedObject (Info->RegisterNode); 565 566 /* An additional reference for the attached objects */ 567 568 AcpiUtAddReference (ObjDesc->BankField.RegionObj); 569 AcpiUtAddReference (ObjDesc->BankField.BankObj); 570 571 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, 572 "Bank Field: BitOff %X, Off %X, Gran %X, Region %p, BankReg %p\n", 573 ObjDesc->BankField.StartFieldBitOffset, 574 ObjDesc->BankField.BaseByteOffset, 575 ObjDesc->Field.AccessByteWidth, 576 ObjDesc->BankField.RegionObj, 577 ObjDesc->BankField.BankObj)); 578 579 /* 580 * Remember location in AML stream of the field unit 581 * opcode and operands -- since the BankValue 582 * operands must be evaluated. 583 */ 584 SecondDesc = ObjDesc->Common.NextObject; 585 SecondDesc->Extra.AmlStart = ACPI_CAST_PTR (ACPI_PARSE_OBJECT, 586 Info->DataRegisterNode)->Named.Data; 587 SecondDesc->Extra.AmlLength = ACPI_CAST_PTR (ACPI_PARSE_OBJECT, 588 Info->DataRegisterNode)->Named.Length; 589 590 break; 591 592 case ACPI_TYPE_LOCAL_INDEX_FIELD: 593 594 /* Get the Index and Data registers */ 595 596 ObjDesc->IndexField.IndexObj = 597 AcpiNsGetAttachedObject (Info->RegisterNode); 598 ObjDesc->IndexField.DataObj = 599 AcpiNsGetAttachedObject (Info->DataRegisterNode); 600 601 if (!ObjDesc->IndexField.DataObj || !ObjDesc->IndexField.IndexObj) 602 { 603 ACPI_ERROR ((AE_INFO, "Null Index Object during field prep")); 604 AcpiUtDeleteObjectDesc (ObjDesc); 605 return_ACPI_STATUS (AE_AML_INTERNAL); 606 } 607 608 /* An additional reference for the attached objects */ 609 610 AcpiUtAddReference (ObjDesc->IndexField.DataObj); 611 AcpiUtAddReference (ObjDesc->IndexField.IndexObj); 612 613 /* 614 * April 2006: Changed to match MS behavior 615 * 616 * The value written to the Index register is the byte offset of the 617 * target field in units of the granularity of the IndexField 618 * 619 * Previously, the value was calculated as an index in terms of the 620 * width of the Data register, as below: 621 * 622 * ObjDesc->IndexField.Value = (UINT32) 623 * (Info->FieldBitPosition / ACPI_MUL_8 ( 624 * ObjDesc->Field.AccessByteWidth)); 625 * 626 * February 2006: Tried value as a byte offset: 627 * ObjDesc->IndexField.Value = (UINT32) 628 * ACPI_DIV_8 (Info->FieldBitPosition); 629 */ 630 ObjDesc->IndexField.Value = (UINT32) ACPI_ROUND_DOWN ( 631 ACPI_DIV_8 (Info->FieldBitPosition), 632 ObjDesc->IndexField.AccessByteWidth); 633 634 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, 635 "IndexField: BitOff %X, Off %X, Value %X, " 636 "Gran %X, Index %p, Data %p\n", 637 ObjDesc->IndexField.StartFieldBitOffset, 638 ObjDesc->IndexField.BaseByteOffset, 639 ObjDesc->IndexField.Value, 640 ObjDesc->Field.AccessByteWidth, 641 ObjDesc->IndexField.IndexObj, 642 ObjDesc->IndexField.DataObj)); 643 break; 644 645 default: 646 647 /* No other types should get here */ 648 649 break; 650 } 651 652 /* 653 * Store the constructed descriptor (ObjDesc) into the parent Node, 654 * preserving the current type of that NamedObj. 655 */ 656 Status = AcpiNsAttachObject ( 657 Info->FieldNode, ObjDesc, AcpiNsGetType (Info->FieldNode)); 658 659 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, 660 "Set NamedObj %p [%4.4s], ObjDesc %p\n", 661 Info->FieldNode, AcpiUtGetNodeName (Info->FieldNode), ObjDesc)); 662 663 /* Remove local reference to the object */ 664 665 AcpiUtRemoveReference (ObjDesc); 666 return_ACPI_STATUS (Status); 667 } 668