1 /****************************************************************************** 2 * 3 * Module Name: exoparg6 - AML execution - opcodes with 6 arguments 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2015, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #include <contrib/dev/acpica/include/acpi.h> 45 #include <contrib/dev/acpica/include/accommon.h> 46 #include <contrib/dev/acpica/include/acinterp.h> 47 #include <contrib/dev/acpica/include/acparser.h> 48 #include <contrib/dev/acpica/include/amlcode.h> 49 50 51 #define _COMPONENT ACPI_EXECUTER 52 ACPI_MODULE_NAME ("exoparg6") 53 54 55 /*! 56 * Naming convention for AML interpreter execution routines. 57 * 58 * The routines that begin execution of AML opcodes are named with a common 59 * convention based upon the number of arguments, the number of target operands, 60 * and whether or not a value is returned: 61 * 62 * AcpiExOpcode_xA_yT_zR 63 * 64 * Where: 65 * 66 * xA - ARGUMENTS: The number of arguments (input operands) that are 67 * required for this opcode type (1 through 6 args). 68 * yT - TARGETS: The number of targets (output operands) that are required 69 * for this opcode type (0, 1, or 2 targets). 70 * zR - RETURN VALUE: Indicates whether this opcode type returns a value 71 * as the function return (0 or 1). 72 * 73 * The AcpiExOpcode* functions are called via the Dispatcher component with 74 * fully resolved operands. 75 !*/ 76 77 /* Local prototypes */ 78 79 static BOOLEAN 80 AcpiExDoMatch ( 81 UINT32 MatchOp, 82 ACPI_OPERAND_OBJECT *PackageObj, 83 ACPI_OPERAND_OBJECT *MatchObj); 84 85 86 /******************************************************************************* 87 * 88 * FUNCTION: AcpiExDoMatch 89 * 90 * PARAMETERS: MatchOp - The AML match operand 91 * PackageObj - Object from the target package 92 * MatchObj - Object to be matched 93 * 94 * RETURN: TRUE if the match is successful, FALSE otherwise 95 * 96 * DESCRIPTION: Implements the low-level match for the ASL Match operator. 97 * Package elements will be implicitly converted to the type of 98 * the match object (Integer/Buffer/String). 99 * 100 ******************************************************************************/ 101 102 static BOOLEAN 103 AcpiExDoMatch ( 104 UINT32 MatchOp, 105 ACPI_OPERAND_OBJECT *PackageObj, 106 ACPI_OPERAND_OBJECT *MatchObj) 107 { 108 BOOLEAN LogicalResult = TRUE; 109 ACPI_STATUS Status; 110 111 112 /* 113 * Note: Since the PackageObj/MatchObj ordering is opposite to that of 114 * the standard logical operators, we have to reverse them when we call 115 * DoLogicalOp in order to make the implicit conversion rules work 116 * correctly. However, this means we have to flip the entire equation 117 * also. A bit ugly perhaps, but overall, better than fussing the 118 * parameters around at runtime, over and over again. 119 * 120 * Below, P[i] refers to the package element, M refers to the Match object. 121 */ 122 switch (MatchOp) 123 { 124 case MATCH_MTR: 125 126 /* Always true */ 127 128 break; 129 130 case MATCH_MEQ: 131 /* 132 * True if equal: (P[i] == M) 133 * Change to: (M == P[i]) 134 */ 135 Status = AcpiExDoLogicalOp (AML_LEQUAL_OP, MatchObj, PackageObj, 136 &LogicalResult); 137 if (ACPI_FAILURE (Status)) 138 { 139 return (FALSE); 140 } 141 break; 142 143 case MATCH_MLE: 144 /* 145 * True if less than or equal: (P[i] <= M) (P[i] NotGreater than M) 146 * Change to: (M >= P[i]) (M NotLess than P[i]) 147 */ 148 Status = AcpiExDoLogicalOp (AML_LLESS_OP, MatchObj, PackageObj, 149 &LogicalResult); 150 if (ACPI_FAILURE (Status)) 151 { 152 return (FALSE); 153 } 154 LogicalResult = (BOOLEAN) !LogicalResult; 155 break; 156 157 case MATCH_MLT: 158 /* 159 * True if less than: (P[i] < M) 160 * Change to: (M > P[i]) 161 */ 162 Status = AcpiExDoLogicalOp (AML_LGREATER_OP, MatchObj, PackageObj, 163 &LogicalResult); 164 if (ACPI_FAILURE (Status)) 165 { 166 return (FALSE); 167 } 168 break; 169 170 case MATCH_MGE: 171 /* 172 * True if greater than or equal: (P[i] >= M) (P[i] NotLess than M) 173 * Change to: (M <= P[i]) (M NotGreater than P[i]) 174 */ 175 Status = AcpiExDoLogicalOp (AML_LGREATER_OP, MatchObj, PackageObj, 176 &LogicalResult); 177 if (ACPI_FAILURE (Status)) 178 { 179 return (FALSE); 180 } 181 LogicalResult = (BOOLEAN)!LogicalResult; 182 break; 183 184 case MATCH_MGT: 185 /* 186 * True if greater than: (P[i] > M) 187 * Change to: (M < P[i]) 188 */ 189 Status = AcpiExDoLogicalOp (AML_LLESS_OP, MatchObj, PackageObj, 190 &LogicalResult); 191 if (ACPI_FAILURE (Status)) 192 { 193 return (FALSE); 194 } 195 break; 196 197 default: 198 199 /* Undefined */ 200 201 return (FALSE); 202 } 203 204 return (LogicalResult); 205 } 206 207 208 /******************************************************************************* 209 * 210 * FUNCTION: AcpiExOpcode_6A_0T_1R 211 * 212 * PARAMETERS: WalkState - Current walk state 213 * 214 * RETURN: Status 215 * 216 * DESCRIPTION: Execute opcode with 6 arguments, no target, and a return value 217 * 218 ******************************************************************************/ 219 220 ACPI_STATUS 221 AcpiExOpcode_6A_0T_1R ( 222 ACPI_WALK_STATE *WalkState) 223 { 224 ACPI_OPERAND_OBJECT **Operand = &WalkState->Operands[0]; 225 ACPI_OPERAND_OBJECT *ReturnDesc = NULL; 226 ACPI_STATUS Status = AE_OK; 227 UINT64 Index; 228 ACPI_OPERAND_OBJECT *ThisElement; 229 230 231 ACPI_FUNCTION_TRACE_STR (ExOpcode_6A_0T_1R, 232 AcpiPsGetOpcodeName (WalkState->Opcode)); 233 234 235 switch (WalkState->Opcode) 236 { 237 case AML_MATCH_OP: 238 /* 239 * Match (SearchPkg[0], MatchOp1[1], MatchObj1[2], 240 * MatchOp2[3], MatchObj2[4], StartIndex[5]) 241 */ 242 243 /* Validate both Match Term Operators (MTR, MEQ, etc.) */ 244 245 if ((Operand[1]->Integer.Value > MAX_MATCH_OPERATOR) || 246 (Operand[3]->Integer.Value > MAX_MATCH_OPERATOR)) 247 { 248 ACPI_ERROR ((AE_INFO, "Match operator out of range")); 249 Status = AE_AML_OPERAND_VALUE; 250 goto Cleanup; 251 } 252 253 /* Get the package StartIndex, validate against the package length */ 254 255 Index = Operand[5]->Integer.Value; 256 if (Index >= Operand[0]->Package.Count) 257 { 258 ACPI_ERROR ((AE_INFO, 259 "Index (0x%8.8X%8.8X) beyond package end (0x%X)", 260 ACPI_FORMAT_UINT64 (Index), Operand[0]->Package.Count)); 261 Status = AE_AML_PACKAGE_LIMIT; 262 goto Cleanup; 263 } 264 265 /* Create an integer for the return value */ 266 /* Default return value is ACPI_UINT64_MAX if no match found */ 267 268 ReturnDesc = AcpiUtCreateIntegerObject (ACPI_UINT64_MAX); 269 if (!ReturnDesc) 270 { 271 Status = AE_NO_MEMORY; 272 goto Cleanup; 273 274 } 275 276 /* 277 * Examine each element until a match is found. Both match conditions 278 * must be satisfied for a match to occur. Within the loop, 279 * "continue" signifies that the current element does not match 280 * and the next should be examined. 281 * 282 * Upon finding a match, the loop will terminate via "break" at 283 * the bottom. If it terminates "normally", MatchValue will be 284 * ACPI_UINT64_MAX (Ones) (its initial value) indicating that no 285 * match was found. 286 */ 287 for ( ; Index < Operand[0]->Package.Count; Index++) 288 { 289 /* Get the current package element */ 290 291 ThisElement = Operand[0]->Package.Elements[Index]; 292 293 /* Treat any uninitialized (NULL) elements as non-matching */ 294 295 if (!ThisElement) 296 { 297 continue; 298 } 299 300 /* 301 * Both match conditions must be satisfied. Execution of a continue 302 * (proceed to next iteration of enclosing for loop) signifies a 303 * non-match. 304 */ 305 if (!AcpiExDoMatch ((UINT32) Operand[1]->Integer.Value, 306 ThisElement, Operand[2])) 307 { 308 continue; 309 } 310 311 if (!AcpiExDoMatch ((UINT32) Operand[3]->Integer.Value, 312 ThisElement, Operand[4])) 313 { 314 continue; 315 } 316 317 /* Match found: Index is the return value */ 318 319 ReturnDesc->Integer.Value = Index; 320 break; 321 } 322 break; 323 324 case AML_LOAD_TABLE_OP: 325 326 Status = AcpiExLoadTableOp (WalkState, &ReturnDesc); 327 break; 328 329 default: 330 331 ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X", 332 WalkState->Opcode)); 333 Status = AE_AML_BAD_OPCODE; 334 goto Cleanup; 335 } 336 337 338 Cleanup: 339 340 /* Delete return object on error */ 341 342 if (ACPI_FAILURE (Status)) 343 { 344 AcpiUtRemoveReference (ReturnDesc); 345 } 346 347 /* Save return object on success */ 348 349 else 350 { 351 WalkState->ResultObj = ReturnDesc; 352 } 353 354 return_ACPI_STATUS (Status); 355 } 356