1 /****************************************************************************** 2 * 3 * Module Name: exfield - ACPI AML (p-code) execution - field manipulation 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2016, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #include <contrib/dev/acpica/include/acpi.h> 45 #include <contrib/dev/acpica/include/accommon.h> 46 #include <contrib/dev/acpica/include/acdispat.h> 47 #include <contrib/dev/acpica/include/acinterp.h> 48 #include <contrib/dev/acpica/include/amlcode.h> 49 50 51 #define _COMPONENT ACPI_EXECUTER 52 ACPI_MODULE_NAME ("exfield") 53 54 /* Local prototypes */ 55 56 static UINT32 57 AcpiExGetSerialAccessLength ( 58 UINT32 AccessorType, 59 UINT32 AccessLength); 60 61 62 /******************************************************************************* 63 * 64 * FUNCTION: AcpiExGetSerialAccessLength 65 * 66 * PARAMETERS: AccessorType - The type of the protocol indicated by region 67 * field access attributes 68 * AccessLength - The access length of the region field 69 * 70 * RETURN: Decoded access length 71 * 72 * DESCRIPTION: This routine returns the length of the GenericSerialBus 73 * protocol bytes 74 * 75 ******************************************************************************/ 76 77 static UINT32 78 AcpiExGetSerialAccessLength ( 79 UINT32 AccessorType, 80 UINT32 AccessLength) 81 { 82 UINT32 Length; 83 84 85 switch (AccessorType) 86 { 87 case AML_FIELD_ATTRIB_QUICK: 88 89 Length = 0; 90 break; 91 92 case AML_FIELD_ATTRIB_SEND_RCV: 93 case AML_FIELD_ATTRIB_BYTE: 94 95 Length = 1; 96 break; 97 98 case AML_FIELD_ATTRIB_WORD: 99 case AML_FIELD_ATTRIB_WORD_CALL: 100 101 Length = 2; 102 break; 103 104 case AML_FIELD_ATTRIB_MULTIBYTE: 105 case AML_FIELD_ATTRIB_RAW_BYTES: 106 case AML_FIELD_ATTRIB_RAW_PROCESS: 107 108 Length = AccessLength; 109 break; 110 111 case AML_FIELD_ATTRIB_BLOCK: 112 case AML_FIELD_ATTRIB_BLOCK_CALL: 113 default: 114 115 Length = ACPI_GSBUS_BUFFER_SIZE - 2; 116 break; 117 } 118 119 return (Length); 120 } 121 122 123 /******************************************************************************* 124 * 125 * FUNCTION: AcpiExReadDataFromField 126 * 127 * PARAMETERS: WalkState - Current execution state 128 * ObjDesc - The named field 129 * RetBufferDesc - Where the return data object is stored 130 * 131 * RETURN: Status 132 * 133 * DESCRIPTION: Read from a named field. Returns either an Integer or a 134 * Buffer, depending on the size of the field. 135 * 136 ******************************************************************************/ 137 138 ACPI_STATUS 139 AcpiExReadDataFromField ( 140 ACPI_WALK_STATE *WalkState, 141 ACPI_OPERAND_OBJECT *ObjDesc, 142 ACPI_OPERAND_OBJECT **RetBufferDesc) 143 { 144 ACPI_STATUS Status; 145 ACPI_OPERAND_OBJECT *BufferDesc; 146 ACPI_SIZE Length; 147 void *Buffer; 148 UINT32 Function; 149 UINT16 AccessorType; 150 151 152 ACPI_FUNCTION_TRACE_PTR (ExReadDataFromField, ObjDesc); 153 154 155 /* Parameter validation */ 156 157 if (!ObjDesc) 158 { 159 return_ACPI_STATUS (AE_AML_NO_OPERAND); 160 } 161 if (!RetBufferDesc) 162 { 163 return_ACPI_STATUS (AE_BAD_PARAMETER); 164 } 165 166 if (ObjDesc->Common.Type == ACPI_TYPE_BUFFER_FIELD) 167 { 168 /* 169 * If the BufferField arguments have not been previously evaluated, 170 * evaluate them now and save the results. 171 */ 172 if (!(ObjDesc->Common.Flags & AOPOBJ_DATA_VALID)) 173 { 174 Status = AcpiDsGetBufferFieldArguments (ObjDesc); 175 if (ACPI_FAILURE (Status)) 176 { 177 return_ACPI_STATUS (Status); 178 } 179 } 180 } 181 else if ((ObjDesc->Common.Type == ACPI_TYPE_LOCAL_REGION_FIELD) && 182 (ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_SMBUS || 183 ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_GSBUS || 184 ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_IPMI)) 185 { 186 /* 187 * This is an SMBus, GSBus or IPMI read. We must create a buffer to 188 * hold the data and then directly access the region handler. 189 * 190 * Note: SMBus and GSBus protocol value is passed in upper 16-bits 191 * of Function 192 */ 193 if (ObjDesc->Field.RegionObj->Region.SpaceId == 194 ACPI_ADR_SPACE_SMBUS) 195 { 196 Length = ACPI_SMBUS_BUFFER_SIZE; 197 Function = ACPI_READ | (ObjDesc->Field.Attribute << 16); 198 } 199 else if (ObjDesc->Field.RegionObj->Region.SpaceId == 200 ACPI_ADR_SPACE_GSBUS) 201 { 202 AccessorType = ObjDesc->Field.Attribute; 203 Length = AcpiExGetSerialAccessLength ( 204 AccessorType, ObjDesc->Field.AccessLength); 205 206 /* 207 * Add additional 2 bytes for the GenericSerialBus data buffer: 208 * 209 * Status; (Byte 0 of the data buffer) 210 * Length; (Byte 1 of the data buffer) 211 * Data[x-1]: (Bytes 2-x of the arbitrary length data buffer) 212 */ 213 Length += 2; 214 Function = ACPI_READ | (AccessorType << 16); 215 } 216 else /* IPMI */ 217 { 218 Length = ACPI_IPMI_BUFFER_SIZE; 219 Function = ACPI_READ; 220 } 221 222 BufferDesc = AcpiUtCreateBufferObject (Length); 223 if (!BufferDesc) 224 { 225 return_ACPI_STATUS (AE_NO_MEMORY); 226 } 227 228 /* Lock entire transaction if requested */ 229 230 AcpiExAcquireGlobalLock (ObjDesc->CommonField.FieldFlags); 231 232 /* Call the region handler for the read */ 233 234 Status = AcpiExAccessRegion (ObjDesc, 0, 235 ACPI_CAST_PTR (UINT64, BufferDesc->Buffer.Pointer), Function); 236 237 AcpiExReleaseGlobalLock (ObjDesc->CommonField.FieldFlags); 238 goto Exit; 239 } 240 241 /* 242 * Allocate a buffer for the contents of the field. 243 * 244 * If the field is larger than the current integer width, create 245 * a BUFFER to hold it. Otherwise, use an INTEGER. This allows 246 * the use of arithmetic operators on the returned value if the 247 * field size is equal or smaller than an Integer. 248 * 249 * Note: Field.length is in bits. 250 */ 251 Length = (ACPI_SIZE) ACPI_ROUND_BITS_UP_TO_BYTES ( 252 ObjDesc->Field.BitLength); 253 254 if (Length > AcpiGbl_IntegerByteWidth) 255 { 256 /* Field is too large for an Integer, create a Buffer instead */ 257 258 BufferDesc = AcpiUtCreateBufferObject (Length); 259 if (!BufferDesc) 260 { 261 return_ACPI_STATUS (AE_NO_MEMORY); 262 } 263 Buffer = BufferDesc->Buffer.Pointer; 264 } 265 else 266 { 267 /* Field will fit within an Integer (normal case) */ 268 269 BufferDesc = AcpiUtCreateIntegerObject ((UINT64) 0); 270 if (!BufferDesc) 271 { 272 return_ACPI_STATUS (AE_NO_MEMORY); 273 } 274 275 Length = AcpiGbl_IntegerByteWidth; 276 Buffer = &BufferDesc->Integer.Value; 277 } 278 279 if ((ObjDesc->Common.Type == ACPI_TYPE_LOCAL_REGION_FIELD) && 280 (ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_GPIO)) 281 { 282 /* 283 * For GPIO (GeneralPurposeIo), the Address will be the bit offset 284 * from the previous Connection() operator, making it effectively a 285 * pin number index. The BitLength is the length of the field, which 286 * is thus the number of pins. 287 */ 288 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, 289 "GPIO FieldRead [FROM]: Pin %u Bits %u\n", 290 ObjDesc->Field.PinNumberIndex, ObjDesc->Field.BitLength)); 291 292 /* Lock entire transaction if requested */ 293 294 AcpiExAcquireGlobalLock (ObjDesc->CommonField.FieldFlags); 295 296 /* Perform the write */ 297 298 Status = AcpiExAccessRegion ( 299 ObjDesc, 0, (UINT64 *) Buffer, ACPI_READ); 300 301 AcpiExReleaseGlobalLock (ObjDesc->CommonField.FieldFlags); 302 if (ACPI_FAILURE (Status)) 303 { 304 AcpiUtRemoveReference (BufferDesc); 305 } 306 else 307 { 308 *RetBufferDesc = BufferDesc; 309 } 310 return_ACPI_STATUS (Status); 311 } 312 313 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, 314 "FieldRead [TO]: Obj %p, Type %X, Buf %p, ByteLen %X\n", 315 ObjDesc, ObjDesc->Common.Type, Buffer, (UINT32) Length)); 316 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, 317 "FieldRead [FROM]: BitLen %X, BitOff %X, ByteOff %X\n", 318 ObjDesc->CommonField.BitLength, 319 ObjDesc->CommonField.StartFieldBitOffset, 320 ObjDesc->CommonField.BaseByteOffset)); 321 322 /* Lock entire transaction if requested */ 323 324 AcpiExAcquireGlobalLock (ObjDesc->CommonField.FieldFlags); 325 326 /* Read from the field */ 327 328 Status = AcpiExExtractFromField (ObjDesc, Buffer, (UINT32) Length); 329 AcpiExReleaseGlobalLock (ObjDesc->CommonField.FieldFlags); 330 331 332 Exit: 333 if (ACPI_FAILURE (Status)) 334 { 335 AcpiUtRemoveReference (BufferDesc); 336 } 337 else 338 { 339 *RetBufferDesc = BufferDesc; 340 } 341 342 return_ACPI_STATUS (Status); 343 } 344 345 346 /******************************************************************************* 347 * 348 * FUNCTION: AcpiExWriteDataToField 349 * 350 * PARAMETERS: SourceDesc - Contains data to write 351 * ObjDesc - The named field 352 * ResultDesc - Where the return value is returned, if any 353 * 354 * RETURN: Status 355 * 356 * DESCRIPTION: Write to a named field 357 * 358 ******************************************************************************/ 359 360 ACPI_STATUS 361 AcpiExWriteDataToField ( 362 ACPI_OPERAND_OBJECT *SourceDesc, 363 ACPI_OPERAND_OBJECT *ObjDesc, 364 ACPI_OPERAND_OBJECT **ResultDesc) 365 { 366 ACPI_STATUS Status; 367 UINT32 Length; 368 void *Buffer; 369 ACPI_OPERAND_OBJECT *BufferDesc; 370 UINT32 Function; 371 UINT16 AccessorType; 372 373 374 ACPI_FUNCTION_TRACE_PTR (ExWriteDataToField, ObjDesc); 375 376 377 /* Parameter validation */ 378 379 if (!SourceDesc || !ObjDesc) 380 { 381 return_ACPI_STATUS (AE_AML_NO_OPERAND); 382 } 383 384 if (ObjDesc->Common.Type == ACPI_TYPE_BUFFER_FIELD) 385 { 386 /* 387 * If the BufferField arguments have not been previously evaluated, 388 * evaluate them now and save the results. 389 */ 390 if (!(ObjDesc->Common.Flags & AOPOBJ_DATA_VALID)) 391 { 392 Status = AcpiDsGetBufferFieldArguments (ObjDesc); 393 if (ACPI_FAILURE (Status)) 394 { 395 return_ACPI_STATUS (Status); 396 } 397 } 398 } 399 else if ((ObjDesc->Common.Type == ACPI_TYPE_LOCAL_REGION_FIELD) && 400 (ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_SMBUS || 401 ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_GSBUS || 402 ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_IPMI)) 403 { 404 /* 405 * This is an SMBus, GSBus or IPMI write. We will bypass the entire 406 * field mechanism and handoff the buffer directly to the handler. 407 * For these address spaces, the buffer is bi-directional; on a 408 * write, return data is returned in the same buffer. 409 * 410 * Source must be a buffer of sufficient size: 411 * ACPI_SMBUS_BUFFER_SIZE, ACPI_GSBUS_BUFFER_SIZE, or 412 * ACPI_IPMI_BUFFER_SIZE. 413 * 414 * Note: SMBus and GSBus protocol type is passed in upper 16-bits 415 * of Function 416 */ 417 if (SourceDesc->Common.Type != ACPI_TYPE_BUFFER) 418 { 419 ACPI_ERROR ((AE_INFO, 420 "SMBus/IPMI/GenericSerialBus write requires " 421 "Buffer, found type %s", 422 AcpiUtGetObjectTypeName (SourceDesc))); 423 424 return_ACPI_STATUS (AE_AML_OPERAND_TYPE); 425 } 426 427 if (ObjDesc->Field.RegionObj->Region.SpaceId == 428 ACPI_ADR_SPACE_SMBUS) 429 { 430 Length = ACPI_SMBUS_BUFFER_SIZE; 431 Function = ACPI_WRITE | (ObjDesc->Field.Attribute << 16); 432 } 433 else if (ObjDesc->Field.RegionObj->Region.SpaceId == 434 ACPI_ADR_SPACE_GSBUS) 435 { 436 AccessorType = ObjDesc->Field.Attribute; 437 Length = AcpiExGetSerialAccessLength ( 438 AccessorType, ObjDesc->Field.AccessLength); 439 440 /* 441 * Add additional 2 bytes for the GenericSerialBus data buffer: 442 * 443 * Status; (Byte 0 of the data buffer) 444 * Length; (Byte 1 of the data buffer) 445 * Data[x-1]: (Bytes 2-x of the arbitrary length data buffer) 446 */ 447 Length += 2; 448 Function = ACPI_WRITE | (AccessorType << 16); 449 } 450 else /* IPMI */ 451 { 452 Length = ACPI_IPMI_BUFFER_SIZE; 453 Function = ACPI_WRITE; 454 } 455 456 if (SourceDesc->Buffer.Length < Length) 457 { 458 ACPI_ERROR ((AE_INFO, 459 "SMBus/IPMI/GenericSerialBus write requires " 460 "Buffer of length %u, found length %u", 461 Length, SourceDesc->Buffer.Length)); 462 463 return_ACPI_STATUS (AE_AML_BUFFER_LIMIT); 464 } 465 466 /* Create the bi-directional buffer */ 467 468 BufferDesc = AcpiUtCreateBufferObject (Length); 469 if (!BufferDesc) 470 { 471 return_ACPI_STATUS (AE_NO_MEMORY); 472 } 473 474 Buffer = BufferDesc->Buffer.Pointer; 475 memcpy (Buffer, SourceDesc->Buffer.Pointer, Length); 476 477 /* Lock entire transaction if requested */ 478 479 AcpiExAcquireGlobalLock (ObjDesc->CommonField.FieldFlags); 480 481 /* 482 * Perform the write (returns status and perhaps data in the 483 * same buffer) 484 */ 485 Status = AcpiExAccessRegion ( 486 ObjDesc, 0, (UINT64 *) Buffer, Function); 487 AcpiExReleaseGlobalLock (ObjDesc->CommonField.FieldFlags); 488 489 *ResultDesc = BufferDesc; 490 return_ACPI_STATUS (Status); 491 } 492 else if ((ObjDesc->Common.Type == ACPI_TYPE_LOCAL_REGION_FIELD) && 493 (ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_GPIO)) 494 { 495 /* 496 * For GPIO (GeneralPurposeIo), we will bypass the entire field 497 * mechanism and handoff the bit address and bit width directly to 498 * the handler. The Address will be the bit offset 499 * from the previous Connection() operator, making it effectively a 500 * pin number index. The BitLength is the length of the field, which 501 * is thus the number of pins. 502 */ 503 if (SourceDesc->Common.Type != ACPI_TYPE_INTEGER) 504 { 505 return_ACPI_STATUS (AE_AML_OPERAND_TYPE); 506 } 507 508 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, 509 "GPIO FieldWrite [FROM]: (%s:%X), Val %.8X [TO]: Pin %u Bits %u\n", 510 AcpiUtGetTypeName (SourceDesc->Common.Type), 511 SourceDesc->Common.Type, (UINT32) SourceDesc->Integer.Value, 512 ObjDesc->Field.PinNumberIndex, ObjDesc->Field.BitLength)); 513 514 Buffer = &SourceDesc->Integer.Value; 515 516 /* Lock entire transaction if requested */ 517 518 AcpiExAcquireGlobalLock (ObjDesc->CommonField.FieldFlags); 519 520 /* Perform the write */ 521 522 Status = AcpiExAccessRegion ( 523 ObjDesc, 0, (UINT64 *) Buffer, ACPI_WRITE); 524 AcpiExReleaseGlobalLock (ObjDesc->CommonField.FieldFlags); 525 return_ACPI_STATUS (Status); 526 } 527 528 /* Get a pointer to the data to be written */ 529 530 switch (SourceDesc->Common.Type) 531 { 532 case ACPI_TYPE_INTEGER: 533 534 Buffer = &SourceDesc->Integer.Value; 535 Length = sizeof (SourceDesc->Integer.Value); 536 break; 537 538 case ACPI_TYPE_BUFFER: 539 540 Buffer = SourceDesc->Buffer.Pointer; 541 Length = SourceDesc->Buffer.Length; 542 break; 543 544 case ACPI_TYPE_STRING: 545 546 Buffer = SourceDesc->String.Pointer; 547 Length = SourceDesc->String.Length; 548 break; 549 550 default: 551 552 return_ACPI_STATUS (AE_AML_OPERAND_TYPE); 553 } 554 555 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, 556 "FieldWrite [FROM]: Obj %p (%s:%X), Buf %p, ByteLen %X\n", 557 SourceDesc, AcpiUtGetTypeName (SourceDesc->Common.Type), 558 SourceDesc->Common.Type, Buffer, Length)); 559 560 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, 561 "FieldWrite [TO]: Obj %p (%s:%X), BitLen %X, BitOff %X, ByteOff %X\n", 562 ObjDesc, AcpiUtGetTypeName (ObjDesc->Common.Type), 563 ObjDesc->Common.Type, 564 ObjDesc->CommonField.BitLength, 565 ObjDesc->CommonField.StartFieldBitOffset, 566 ObjDesc->CommonField.BaseByteOffset)); 567 568 /* Lock entire transaction if requested */ 569 570 AcpiExAcquireGlobalLock (ObjDesc->CommonField.FieldFlags); 571 572 /* Write to the field */ 573 574 Status = AcpiExInsertIntoField (ObjDesc, Buffer, Length); 575 AcpiExReleaseGlobalLock (ObjDesc->CommonField.FieldFlags); 576 577 return_ACPI_STATUS (Status); 578 } 579