1 /****************************************************************************** 2 * 3 * Module Name: excreate - Named object creation 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2016, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #include <contrib/dev/acpica/include/acpi.h> 45 #include <contrib/dev/acpica/include/accommon.h> 46 #include <contrib/dev/acpica/include/acinterp.h> 47 #include <contrib/dev/acpica/include/amlcode.h> 48 #include <contrib/dev/acpica/include/acnamesp.h> 49 50 51 #define _COMPONENT ACPI_EXECUTER 52 ACPI_MODULE_NAME ("excreate") 53 54 55 #ifndef ACPI_NO_METHOD_EXECUTION 56 /******************************************************************************* 57 * 58 * FUNCTION: AcpiExCreateAlias 59 * 60 * PARAMETERS: WalkState - Current state, contains operands 61 * 62 * RETURN: Status 63 * 64 * DESCRIPTION: Create a new named alias 65 * 66 ******************************************************************************/ 67 68 ACPI_STATUS 69 AcpiExCreateAlias ( 70 ACPI_WALK_STATE *WalkState) 71 { 72 ACPI_NAMESPACE_NODE *TargetNode; 73 ACPI_NAMESPACE_NODE *AliasNode; 74 ACPI_STATUS Status = AE_OK; 75 76 77 ACPI_FUNCTION_TRACE (ExCreateAlias); 78 79 80 /* Get the source/alias operands (both namespace nodes) */ 81 82 AliasNode = (ACPI_NAMESPACE_NODE *) WalkState->Operands[0]; 83 TargetNode = (ACPI_NAMESPACE_NODE *) WalkState->Operands[1]; 84 85 if ((TargetNode->Type == ACPI_TYPE_LOCAL_ALIAS) || 86 (TargetNode->Type == ACPI_TYPE_LOCAL_METHOD_ALIAS)) 87 { 88 /* 89 * Dereference an existing alias so that we don't create a chain 90 * of aliases. With this code, we guarantee that an alias is 91 * always exactly one level of indirection away from the 92 * actual aliased name. 93 */ 94 TargetNode = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, TargetNode->Object); 95 } 96 97 /* 98 * For objects that can never change (i.e., the NS node will 99 * permanently point to the same object), we can simply attach 100 * the object to the new NS node. For other objects (such as 101 * Integers, buffers, etc.), we have to point the Alias node 102 * to the original Node. 103 */ 104 switch (TargetNode->Type) 105 { 106 107 /* For these types, the sub-object can change dynamically via a Store */ 108 109 case ACPI_TYPE_INTEGER: 110 case ACPI_TYPE_STRING: 111 case ACPI_TYPE_BUFFER: 112 case ACPI_TYPE_PACKAGE: 113 case ACPI_TYPE_BUFFER_FIELD: 114 /* 115 * These types open a new scope, so we need the NS node in order to access 116 * any children. 117 */ 118 case ACPI_TYPE_DEVICE: 119 case ACPI_TYPE_POWER: 120 case ACPI_TYPE_PROCESSOR: 121 case ACPI_TYPE_THERMAL: 122 case ACPI_TYPE_LOCAL_SCOPE: 123 /* 124 * The new alias has the type ALIAS and points to the original 125 * NS node, not the object itself. 126 */ 127 AliasNode->Type = ACPI_TYPE_LOCAL_ALIAS; 128 AliasNode->Object = ACPI_CAST_PTR (ACPI_OPERAND_OBJECT, TargetNode); 129 break; 130 131 case ACPI_TYPE_METHOD: 132 /* 133 * Control method aliases need to be differentiated 134 */ 135 AliasNode->Type = ACPI_TYPE_LOCAL_METHOD_ALIAS; 136 AliasNode->Object = ACPI_CAST_PTR (ACPI_OPERAND_OBJECT, TargetNode); 137 break; 138 139 default: 140 141 /* Attach the original source object to the new Alias Node */ 142 143 /* 144 * The new alias assumes the type of the target, and it points 145 * to the same object. The reference count of the object has an 146 * additional reference to prevent deletion out from under either the 147 * target node or the alias Node 148 */ 149 Status = AcpiNsAttachObject (AliasNode, 150 AcpiNsGetAttachedObject (TargetNode), TargetNode->Type); 151 break; 152 } 153 154 /* Since both operands are Nodes, we don't need to delete them */ 155 156 return_ACPI_STATUS (Status); 157 } 158 159 160 /******************************************************************************* 161 * 162 * FUNCTION: AcpiExCreateEvent 163 * 164 * PARAMETERS: WalkState - Current state 165 * 166 * RETURN: Status 167 * 168 * DESCRIPTION: Create a new event object 169 * 170 ******************************************************************************/ 171 172 ACPI_STATUS 173 AcpiExCreateEvent ( 174 ACPI_WALK_STATE *WalkState) 175 { 176 ACPI_STATUS Status; 177 ACPI_OPERAND_OBJECT *ObjDesc; 178 179 180 ACPI_FUNCTION_TRACE (ExCreateEvent); 181 182 183 ObjDesc = AcpiUtCreateInternalObject (ACPI_TYPE_EVENT); 184 if (!ObjDesc) 185 { 186 Status = AE_NO_MEMORY; 187 goto Cleanup; 188 } 189 190 /* 191 * Create the actual OS semaphore, with zero initial units -- meaning 192 * that the event is created in an unsignalled state 193 */ 194 Status = AcpiOsCreateSemaphore (ACPI_NO_UNIT_LIMIT, 0, 195 &ObjDesc->Event.OsSemaphore); 196 if (ACPI_FAILURE (Status)) 197 { 198 goto Cleanup; 199 } 200 201 /* Attach object to the Node */ 202 203 Status = AcpiNsAttachObject ( 204 (ACPI_NAMESPACE_NODE *) WalkState->Operands[0], 205 ObjDesc, ACPI_TYPE_EVENT); 206 207 Cleanup: 208 /* 209 * Remove local reference to the object (on error, will cause deletion 210 * of both object and semaphore if present.) 211 */ 212 AcpiUtRemoveReference (ObjDesc); 213 return_ACPI_STATUS (Status); 214 } 215 216 217 /******************************************************************************* 218 * 219 * FUNCTION: AcpiExCreateMutex 220 * 221 * PARAMETERS: WalkState - Current state 222 * 223 * RETURN: Status 224 * 225 * DESCRIPTION: Create a new mutex object 226 * 227 * Mutex (Name[0], SyncLevel[1]) 228 * 229 ******************************************************************************/ 230 231 ACPI_STATUS 232 AcpiExCreateMutex ( 233 ACPI_WALK_STATE *WalkState) 234 { 235 ACPI_STATUS Status = AE_OK; 236 ACPI_OPERAND_OBJECT *ObjDesc; 237 238 239 ACPI_FUNCTION_TRACE_PTR (ExCreateMutex, ACPI_WALK_OPERANDS); 240 241 242 /* Create the new mutex object */ 243 244 ObjDesc = AcpiUtCreateInternalObject (ACPI_TYPE_MUTEX); 245 if (!ObjDesc) 246 { 247 Status = AE_NO_MEMORY; 248 goto Cleanup; 249 } 250 251 /* Create the actual OS Mutex */ 252 253 Status = AcpiOsCreateMutex (&ObjDesc->Mutex.OsMutex); 254 if (ACPI_FAILURE (Status)) 255 { 256 goto Cleanup; 257 } 258 259 /* Init object and attach to NS node */ 260 261 ObjDesc->Mutex.SyncLevel = (UINT8) WalkState->Operands[1]->Integer.Value; 262 ObjDesc->Mutex.Node = (ACPI_NAMESPACE_NODE *) WalkState->Operands[0]; 263 264 Status = AcpiNsAttachObject ( 265 ObjDesc->Mutex.Node, ObjDesc, ACPI_TYPE_MUTEX); 266 267 268 Cleanup: 269 /* 270 * Remove local reference to the object (on error, will cause deletion 271 * of both object and semaphore if present.) 272 */ 273 AcpiUtRemoveReference (ObjDesc); 274 return_ACPI_STATUS (Status); 275 } 276 277 278 /******************************************************************************* 279 * 280 * FUNCTION: AcpiExCreateRegion 281 * 282 * PARAMETERS: AmlStart - Pointer to the region declaration AML 283 * AmlLength - Max length of the declaration AML 284 * SpaceId - Address space ID for the region 285 * WalkState - Current state 286 * 287 * RETURN: Status 288 * 289 * DESCRIPTION: Create a new operation region object 290 * 291 ******************************************************************************/ 292 293 ACPI_STATUS 294 AcpiExCreateRegion ( 295 UINT8 *AmlStart, 296 UINT32 AmlLength, 297 UINT8 SpaceId, 298 ACPI_WALK_STATE *WalkState) 299 { 300 ACPI_STATUS Status; 301 ACPI_OPERAND_OBJECT *ObjDesc; 302 ACPI_NAMESPACE_NODE *Node; 303 ACPI_OPERAND_OBJECT *RegionObj2; 304 305 306 ACPI_FUNCTION_TRACE (ExCreateRegion); 307 308 309 /* Get the Namespace Node */ 310 311 Node = WalkState->Op->Common.Node; 312 313 /* 314 * If the region object is already attached to this node, 315 * just return 316 */ 317 if (AcpiNsGetAttachedObject (Node)) 318 { 319 return_ACPI_STATUS (AE_OK); 320 } 321 322 /* 323 * Space ID must be one of the predefined IDs, or in the user-defined 324 * range 325 */ 326 if (!AcpiIsValidSpaceId (SpaceId)) 327 { 328 /* 329 * Print an error message, but continue. We don't want to abort 330 * a table load for this exception. Instead, if the region is 331 * actually used at runtime, abort the executing method. 332 */ 333 ACPI_ERROR ((AE_INFO, 334 "Invalid/unknown Address Space ID: 0x%2.2X", SpaceId)); 335 } 336 337 ACPI_DEBUG_PRINT ((ACPI_DB_LOAD, "Region Type - %s (0x%X)\n", 338 AcpiUtGetRegionName (SpaceId), SpaceId)); 339 340 /* Create the region descriptor */ 341 342 ObjDesc = AcpiUtCreateInternalObject (ACPI_TYPE_REGION); 343 if (!ObjDesc) 344 { 345 Status = AE_NO_MEMORY; 346 goto Cleanup; 347 } 348 349 /* 350 * Remember location in AML stream of address & length 351 * operands since they need to be evaluated at run time. 352 */ 353 RegionObj2 = AcpiNsGetSecondaryObject (ObjDesc); 354 RegionObj2->Extra.AmlStart = AmlStart; 355 RegionObj2->Extra.AmlLength = AmlLength; 356 RegionObj2->Extra.Method_REG = NULL; 357 if (WalkState->ScopeInfo) 358 { 359 RegionObj2->Extra.ScopeNode = WalkState->ScopeInfo->Scope.Node; 360 } 361 else 362 { 363 RegionObj2->Extra.ScopeNode = Node; 364 } 365 366 /* Init the region from the operands */ 367 368 ObjDesc->Region.SpaceId = SpaceId; 369 ObjDesc->Region.Address = 0; 370 ObjDesc->Region.Length = 0; 371 ObjDesc->Region.Node = Node; 372 ObjDesc->Region.Handler = NULL; 373 ObjDesc->Common.Flags &= 374 ~(AOPOBJ_SETUP_COMPLETE | AOPOBJ_REG_CONNECTED | 375 AOPOBJ_OBJECT_INITIALIZED); 376 377 /* Install the new region object in the parent Node */ 378 379 Status = AcpiNsAttachObject (Node, ObjDesc, ACPI_TYPE_REGION); 380 381 382 Cleanup: 383 384 /* Remove local reference to the object */ 385 386 AcpiUtRemoveReference (ObjDesc); 387 return_ACPI_STATUS (Status); 388 } 389 390 391 /******************************************************************************* 392 * 393 * FUNCTION: AcpiExCreateProcessor 394 * 395 * PARAMETERS: WalkState - Current state 396 * 397 * RETURN: Status 398 * 399 * DESCRIPTION: Create a new processor object and populate the fields 400 * 401 * Processor (Name[0], CpuID[1], PblockAddr[2], PblockLength[3]) 402 * 403 ******************************************************************************/ 404 405 ACPI_STATUS 406 AcpiExCreateProcessor ( 407 ACPI_WALK_STATE *WalkState) 408 { 409 ACPI_OPERAND_OBJECT **Operand = &WalkState->Operands[0]; 410 ACPI_OPERAND_OBJECT *ObjDesc; 411 ACPI_STATUS Status; 412 413 414 ACPI_FUNCTION_TRACE_PTR (ExCreateProcessor, WalkState); 415 416 417 /* Create the processor object */ 418 419 ObjDesc = AcpiUtCreateInternalObject (ACPI_TYPE_PROCESSOR); 420 if (!ObjDesc) 421 { 422 return_ACPI_STATUS (AE_NO_MEMORY); 423 } 424 425 /* Initialize the processor object from the operands */ 426 427 ObjDesc->Processor.ProcId = (UINT8) Operand[1]->Integer.Value; 428 ObjDesc->Processor.Length = (UINT8) Operand[3]->Integer.Value; 429 ObjDesc->Processor.Address = (ACPI_IO_ADDRESS) Operand[2]->Integer.Value; 430 431 /* Install the processor object in the parent Node */ 432 433 Status = AcpiNsAttachObject ((ACPI_NAMESPACE_NODE *) Operand[0], 434 ObjDesc, ACPI_TYPE_PROCESSOR); 435 436 /* Remove local reference to the object */ 437 438 AcpiUtRemoveReference (ObjDesc); 439 return_ACPI_STATUS (Status); 440 } 441 442 443 /******************************************************************************* 444 * 445 * FUNCTION: AcpiExCreatePowerResource 446 * 447 * PARAMETERS: WalkState - Current state 448 * 449 * RETURN: Status 450 * 451 * DESCRIPTION: Create a new PowerResource object and populate the fields 452 * 453 * PowerResource (Name[0], SystemLevel[1], ResourceOrder[2]) 454 * 455 ******************************************************************************/ 456 457 ACPI_STATUS 458 AcpiExCreatePowerResource ( 459 ACPI_WALK_STATE *WalkState) 460 { 461 ACPI_OPERAND_OBJECT **Operand = &WalkState->Operands[0]; 462 ACPI_STATUS Status; 463 ACPI_OPERAND_OBJECT *ObjDesc; 464 465 466 ACPI_FUNCTION_TRACE_PTR (ExCreatePowerResource, WalkState); 467 468 469 /* Create the power resource object */ 470 471 ObjDesc = AcpiUtCreateInternalObject (ACPI_TYPE_POWER); 472 if (!ObjDesc) 473 { 474 return_ACPI_STATUS (AE_NO_MEMORY); 475 } 476 477 /* Initialize the power object from the operands */ 478 479 ObjDesc->PowerResource.SystemLevel = (UINT8) Operand[1]->Integer.Value; 480 ObjDesc->PowerResource.ResourceOrder = (UINT16) Operand[2]->Integer.Value; 481 482 /* Install the power resource object in the parent Node */ 483 484 Status = AcpiNsAttachObject ((ACPI_NAMESPACE_NODE *) Operand[0], 485 ObjDesc, ACPI_TYPE_POWER); 486 487 /* Remove local reference to the object */ 488 489 AcpiUtRemoveReference (ObjDesc); 490 return_ACPI_STATUS (Status); 491 } 492 #endif 493 494 495 /******************************************************************************* 496 * 497 * FUNCTION: AcpiExCreateMethod 498 * 499 * PARAMETERS: AmlStart - First byte of the method's AML 500 * AmlLength - AML byte count for this method 501 * WalkState - Current state 502 * 503 * RETURN: Status 504 * 505 * DESCRIPTION: Create a new method object 506 * 507 ******************************************************************************/ 508 509 ACPI_STATUS 510 AcpiExCreateMethod ( 511 UINT8 *AmlStart, 512 UINT32 AmlLength, 513 ACPI_WALK_STATE *WalkState) 514 { 515 ACPI_OPERAND_OBJECT **Operand = &WalkState->Operands[0]; 516 ACPI_OPERAND_OBJECT *ObjDesc; 517 ACPI_STATUS Status; 518 UINT8 MethodFlags; 519 520 521 ACPI_FUNCTION_TRACE_PTR (ExCreateMethod, WalkState); 522 523 524 /* Create a new method object */ 525 526 ObjDesc = AcpiUtCreateInternalObject (ACPI_TYPE_METHOD); 527 if (!ObjDesc) 528 { 529 Status = AE_NO_MEMORY; 530 goto Exit; 531 } 532 533 /* Save the method's AML pointer and length */ 534 535 ObjDesc->Method.AmlStart = AmlStart; 536 ObjDesc->Method.AmlLength = AmlLength; 537 ObjDesc->Method.Node = Operand[0]; 538 539 /* 540 * Disassemble the method flags. Split off the ArgCount, Serialized 541 * flag, and SyncLevel for efficiency. 542 */ 543 MethodFlags = (UINT8) Operand[1]->Integer.Value; 544 ObjDesc->Method.ParamCount = (UINT8) 545 (MethodFlags & AML_METHOD_ARG_COUNT); 546 547 /* 548 * Get the SyncLevel. If method is serialized, a mutex will be 549 * created for this method when it is parsed. 550 */ 551 if (MethodFlags & AML_METHOD_SERIALIZED) 552 { 553 ObjDesc->Method.InfoFlags = ACPI_METHOD_SERIALIZED; 554 555 /* 556 * ACPI 1.0: SyncLevel = 0 557 * ACPI 2.0: SyncLevel = SyncLevel in method declaration 558 */ 559 ObjDesc->Method.SyncLevel = (UINT8) 560 ((MethodFlags & AML_METHOD_SYNC_LEVEL) >> 4); 561 } 562 563 /* Attach the new object to the method Node */ 564 565 Status = AcpiNsAttachObject ((ACPI_NAMESPACE_NODE *) Operand[0], 566 ObjDesc, ACPI_TYPE_METHOD); 567 568 /* Remove local reference to the object */ 569 570 AcpiUtRemoveReference (ObjDesc); 571 572 Exit: 573 /* Remove a reference to the operand */ 574 575 AcpiUtRemoveReference (Operand[1]); 576 return_ACPI_STATUS (Status); 577 } 578