1 /****************************************************************************** 2 * 3 * Module Name: evxfregn - External Interfaces, ACPI Operation Regions and 4 * Address Spaces. 5 * 6 *****************************************************************************/ 7 8 /* 9 * Copyright (C) 2000 - 2013, Intel Corp. 10 * All rights reserved. 11 * 12 * Redistribution and use in source and binary forms, with or without 13 * modification, are permitted provided that the following conditions 14 * are met: 15 * 1. Redistributions of source code must retain the above copyright 16 * notice, this list of conditions, and the following disclaimer, 17 * without modification. 18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 19 * substantially similar to the "NO WARRANTY" disclaimer below 20 * ("Disclaimer") and any redistribution must be conditioned upon 21 * including a substantially similar Disclaimer requirement for further 22 * binary redistribution. 23 * 3. Neither the names of the above-listed copyright holders nor the names 24 * of any contributors may be used to endorse or promote products derived 25 * from this software without specific prior written permission. 26 * 27 * Alternatively, this software may be distributed under the terms of the 28 * GNU General Public License ("GPL") version 2 as published by the Free 29 * Software Foundation. 30 * 31 * NO WARRANTY 32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 42 * POSSIBILITY OF SUCH DAMAGES. 43 */ 44 45 #define __EVXFREGN_C__ 46 47 #include <contrib/dev/acpica/include/acpi.h> 48 #include <contrib/dev/acpica/include/accommon.h> 49 #include <contrib/dev/acpica/include/acnamesp.h> 50 #include <contrib/dev/acpica/include/acevents.h> 51 52 #define _COMPONENT ACPI_EVENTS 53 ACPI_MODULE_NAME ("evxfregn") 54 55 56 /******************************************************************************* 57 * 58 * FUNCTION: AcpiInstallAddressSpaceHandler 59 * 60 * PARAMETERS: Device - Handle for the device 61 * SpaceId - The address space ID 62 * Handler - Address of the handler 63 * Setup - Address of the setup function 64 * Context - Value passed to the handler on each access 65 * 66 * RETURN: Status 67 * 68 * DESCRIPTION: Install a handler for all OpRegions of a given SpaceId. 69 * 70 * NOTE: This function should only be called after AcpiEnableSubsystem has 71 * been called. This is because any _REG methods associated with the Space ID 72 * are executed here, and these methods can only be safely executed after 73 * the default handlers have been installed and the hardware has been 74 * initialized (via AcpiEnableSubsystem.) 75 * 76 ******************************************************************************/ 77 78 ACPI_STATUS 79 AcpiInstallAddressSpaceHandler ( 80 ACPI_HANDLE Device, 81 ACPI_ADR_SPACE_TYPE SpaceId, 82 ACPI_ADR_SPACE_HANDLER Handler, 83 ACPI_ADR_SPACE_SETUP Setup, 84 void *Context) 85 { 86 ACPI_NAMESPACE_NODE *Node; 87 ACPI_STATUS Status; 88 89 90 ACPI_FUNCTION_TRACE (AcpiInstallAddressSpaceHandler); 91 92 93 /* Parameter validation */ 94 95 if (!Device) 96 { 97 return_ACPI_STATUS (AE_BAD_PARAMETER); 98 } 99 100 Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE); 101 if (ACPI_FAILURE (Status)) 102 { 103 return_ACPI_STATUS (Status); 104 } 105 106 /* Convert and validate the device handle */ 107 108 Node = AcpiNsValidateHandle (Device); 109 if (!Node) 110 { 111 Status = AE_BAD_PARAMETER; 112 goto UnlockAndExit; 113 } 114 115 /* Install the handler for all Regions for this Space ID */ 116 117 Status = AcpiEvInstallSpaceHandler (Node, SpaceId, Handler, Setup, Context); 118 if (ACPI_FAILURE (Status)) 119 { 120 goto UnlockAndExit; 121 } 122 123 /* 124 * For the default SpaceIDs, (the IDs for which there are default region handlers 125 * installed) Only execute the _REG methods if the global initialization _REG 126 * methods have already been run (via AcpiInitializeObjects). In other words, 127 * we will defer the execution of the _REG methods for these SpaceIDs until 128 * execution of AcpiInitializeObjects. This is done because we need the handlers 129 * for the default spaces (mem/io/pci/table) to be installed before we can run 130 * any control methods (or _REG methods). There is known BIOS code that depends 131 * on this. 132 * 133 * For all other SpaceIDs, we can safely execute the _REG methods immediately. 134 * This means that for IDs like EmbeddedController, this function should be called 135 * only after AcpiEnableSubsystem has been called. 136 */ 137 switch (SpaceId) 138 { 139 case ACPI_ADR_SPACE_SYSTEM_MEMORY: 140 case ACPI_ADR_SPACE_SYSTEM_IO: 141 case ACPI_ADR_SPACE_PCI_CONFIG: 142 case ACPI_ADR_SPACE_DATA_TABLE: 143 144 if (!AcpiGbl_RegMethodsExecuted) 145 { 146 /* We will defer execution of the _REG methods for this space */ 147 goto UnlockAndExit; 148 } 149 break; 150 151 default: 152 break; 153 } 154 155 /* Run all _REG methods for this address space */ 156 157 Status = AcpiEvExecuteRegMethods (Node, SpaceId); 158 159 160 UnlockAndExit: 161 (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE); 162 return_ACPI_STATUS (Status); 163 } 164 165 ACPI_EXPORT_SYMBOL (AcpiInstallAddressSpaceHandler) 166 167 168 /******************************************************************************* 169 * 170 * FUNCTION: AcpiRemoveAddressSpaceHandler 171 * 172 * PARAMETERS: Device - Handle for the device 173 * SpaceId - The address space ID 174 * Handler - Address of the handler 175 * 176 * RETURN: Status 177 * 178 * DESCRIPTION: Remove a previously installed handler. 179 * 180 ******************************************************************************/ 181 182 ACPI_STATUS 183 AcpiRemoveAddressSpaceHandler ( 184 ACPI_HANDLE Device, 185 ACPI_ADR_SPACE_TYPE SpaceId, 186 ACPI_ADR_SPACE_HANDLER Handler) 187 { 188 ACPI_OPERAND_OBJECT *ObjDesc; 189 ACPI_OPERAND_OBJECT *HandlerObj; 190 ACPI_OPERAND_OBJECT *RegionObj; 191 ACPI_OPERAND_OBJECT **LastObjPtr; 192 ACPI_NAMESPACE_NODE *Node; 193 ACPI_STATUS Status; 194 195 196 ACPI_FUNCTION_TRACE (AcpiRemoveAddressSpaceHandler); 197 198 199 /* Parameter validation */ 200 201 if (!Device) 202 { 203 return_ACPI_STATUS (AE_BAD_PARAMETER); 204 } 205 206 Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE); 207 if (ACPI_FAILURE (Status)) 208 { 209 return_ACPI_STATUS (Status); 210 } 211 212 /* Convert and validate the device handle */ 213 214 Node = AcpiNsValidateHandle (Device); 215 if (!Node || 216 ((Node->Type != ACPI_TYPE_DEVICE) && 217 (Node->Type != ACPI_TYPE_PROCESSOR) && 218 (Node->Type != ACPI_TYPE_THERMAL) && 219 (Node != AcpiGbl_RootNode))) 220 { 221 Status = AE_BAD_PARAMETER; 222 goto UnlockAndExit; 223 } 224 225 /* Make sure the internal object exists */ 226 227 ObjDesc = AcpiNsGetAttachedObject (Node); 228 if (!ObjDesc) 229 { 230 Status = AE_NOT_EXIST; 231 goto UnlockAndExit; 232 } 233 234 /* Find the address handler the user requested */ 235 236 HandlerObj = ObjDesc->Device.Handler; 237 LastObjPtr = &ObjDesc->Device.Handler; 238 while (HandlerObj) 239 { 240 /* We have a handler, see if user requested this one */ 241 242 if (HandlerObj->AddressSpace.SpaceId == SpaceId) 243 { 244 /* Handler must be the same as the installed handler */ 245 246 if (HandlerObj->AddressSpace.Handler != Handler) 247 { 248 Status = AE_BAD_PARAMETER; 249 goto UnlockAndExit; 250 } 251 252 /* Matched SpaceId, first dereference this in the Regions */ 253 254 ACPI_DEBUG_PRINT ((ACPI_DB_OPREGION, 255 "Removing address handler %p(%p) for region %s " 256 "on Device %p(%p)\n", 257 HandlerObj, Handler, AcpiUtGetRegionName (SpaceId), 258 Node, ObjDesc)); 259 260 RegionObj = HandlerObj->AddressSpace.RegionList; 261 262 /* Walk the handler's region list */ 263 264 while (RegionObj) 265 { 266 /* 267 * First disassociate the handler from the region. 268 * 269 * NOTE: this doesn't mean that the region goes away 270 * The region is just inaccessible as indicated to 271 * the _REG method 272 */ 273 AcpiEvDetachRegion (RegionObj, TRUE); 274 275 /* 276 * Walk the list: Just grab the head because the 277 * DetachRegion removed the previous head. 278 */ 279 RegionObj = HandlerObj->AddressSpace.RegionList; 280 281 } 282 283 /* Remove this Handler object from the list */ 284 285 *LastObjPtr = HandlerObj->AddressSpace.Next; 286 287 /* Now we can delete the handler object */ 288 289 AcpiUtRemoveReference (HandlerObj); 290 goto UnlockAndExit; 291 } 292 293 /* Walk the linked list of handlers */ 294 295 LastObjPtr = &HandlerObj->AddressSpace.Next; 296 HandlerObj = HandlerObj->AddressSpace.Next; 297 } 298 299 /* The handler does not exist */ 300 301 ACPI_DEBUG_PRINT ((ACPI_DB_OPREGION, 302 "Unable to remove address handler %p for %s(%X), DevNode %p, obj %p\n", 303 Handler, AcpiUtGetRegionName (SpaceId), SpaceId, Node, ObjDesc)); 304 305 Status = AE_NOT_EXIST; 306 307 UnlockAndExit: 308 (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE); 309 return_ACPI_STATUS (Status); 310 } 311 312 ACPI_EXPORT_SYMBOL (AcpiRemoveAddressSpaceHandler) 313