1 /****************************************************************************** 2 * 3 * Module Name: evxface - External interfaces for ACPI events 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2015, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #define EXPORT_ACPI_INTERFACES 45 46 #include <contrib/dev/acpica/include/acpi.h> 47 #include <contrib/dev/acpica/include/accommon.h> 48 #include <contrib/dev/acpica/include/acnamesp.h> 49 #include <contrib/dev/acpica/include/acevents.h> 50 #include <contrib/dev/acpica/include/acinterp.h> 51 52 #define _COMPONENT ACPI_EVENTS 53 ACPI_MODULE_NAME ("evxface") 54 55 #if (!ACPI_REDUCED_HARDWARE) 56 57 /* Local prototypes */ 58 59 static ACPI_STATUS 60 AcpiEvInstallGpeHandler ( 61 ACPI_HANDLE GpeDevice, 62 UINT32 GpeNumber, 63 UINT32 Type, 64 BOOLEAN IsRawHandler, 65 ACPI_GPE_HANDLER Address, 66 void *Context); 67 68 #endif 69 70 71 /******************************************************************************* 72 * 73 * FUNCTION: AcpiInstallNotifyHandler 74 * 75 * PARAMETERS: Device - The device for which notifies will be handled 76 * HandlerType - The type of handler: 77 * ACPI_SYSTEM_NOTIFY: System Handler (00-7F) 78 * ACPI_DEVICE_NOTIFY: Device Handler (80-FF) 79 * ACPI_ALL_NOTIFY: Both System and Device 80 * Handler - Address of the handler 81 * Context - Value passed to the handler on each GPE 82 * 83 * RETURN: Status 84 * 85 * DESCRIPTION: Install a handler for notifications on an ACPI Device, 86 * ThermalZone, or Processor object. 87 * 88 * NOTES: The Root namespace object may have only one handler for each 89 * type of notify (System/Device). Device/Thermal/Processor objects 90 * may have one device notify handler, and multiple system notify 91 * handlers. 92 * 93 ******************************************************************************/ 94 95 ACPI_STATUS 96 AcpiInstallNotifyHandler ( 97 ACPI_HANDLE Device, 98 UINT32 HandlerType, 99 ACPI_NOTIFY_HANDLER Handler, 100 void *Context) 101 { 102 ACPI_NAMESPACE_NODE *Node = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, Device); 103 ACPI_OPERAND_OBJECT *ObjDesc; 104 ACPI_OPERAND_OBJECT *HandlerObj; 105 ACPI_STATUS Status; 106 UINT32 i; 107 108 109 ACPI_FUNCTION_TRACE (AcpiInstallNotifyHandler); 110 111 112 /* Parameter validation */ 113 114 if ((!Device) || (!Handler) || (!HandlerType) || 115 (HandlerType > ACPI_MAX_NOTIFY_HANDLER_TYPE)) 116 { 117 return_ACPI_STATUS (AE_BAD_PARAMETER); 118 } 119 120 Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE); 121 if (ACPI_FAILURE (Status)) 122 { 123 return_ACPI_STATUS (Status); 124 } 125 126 /* 127 * Root Object: 128 * Registering a notify handler on the root object indicates that the 129 * caller wishes to receive notifications for all objects. Note that 130 * only one global handler can be registered per notify type. 131 * Ensure that a handler is not already installed. 132 */ 133 if (Device == ACPI_ROOT_OBJECT) 134 { 135 for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) 136 { 137 if (HandlerType & (i+1)) 138 { 139 if (AcpiGbl_GlobalNotify[i].Handler) 140 { 141 Status = AE_ALREADY_EXISTS; 142 goto UnlockAndExit; 143 } 144 145 AcpiGbl_GlobalNotify[i].Handler = Handler; 146 AcpiGbl_GlobalNotify[i].Context = Context; 147 } 148 } 149 150 goto UnlockAndExit; /* Global notify handler installed, all done */ 151 } 152 153 /* 154 * All Other Objects: 155 * Caller will only receive notifications specific to the target 156 * object. Note that only certain object types are allowed to 157 * receive notifications. 158 */ 159 160 /* Are Notifies allowed on this object? */ 161 162 if (!AcpiEvIsNotifyObject (Node)) 163 { 164 Status = AE_TYPE; 165 goto UnlockAndExit; 166 } 167 168 /* Check for an existing internal object, might not exist */ 169 170 ObjDesc = AcpiNsGetAttachedObject (Node); 171 if (!ObjDesc) 172 { 173 /* Create a new object */ 174 175 ObjDesc = AcpiUtCreateInternalObject (Node->Type); 176 if (!ObjDesc) 177 { 178 Status = AE_NO_MEMORY; 179 goto UnlockAndExit; 180 } 181 182 /* Attach new object to the Node, remove local reference */ 183 184 Status = AcpiNsAttachObject (Device, ObjDesc, Node->Type); 185 AcpiUtRemoveReference (ObjDesc); 186 if (ACPI_FAILURE (Status)) 187 { 188 goto UnlockAndExit; 189 } 190 } 191 192 /* Ensure that the handler is not already installed in the lists */ 193 194 for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) 195 { 196 if (HandlerType & (i+1)) 197 { 198 HandlerObj = ObjDesc->CommonNotify.NotifyList[i]; 199 while (HandlerObj) 200 { 201 if (HandlerObj->Notify.Handler == Handler) 202 { 203 Status = AE_ALREADY_EXISTS; 204 goto UnlockAndExit; 205 } 206 207 HandlerObj = HandlerObj->Notify.Next[i]; 208 } 209 } 210 } 211 212 /* Create and populate a new notify handler object */ 213 214 HandlerObj = AcpiUtCreateInternalObject (ACPI_TYPE_LOCAL_NOTIFY); 215 if (!HandlerObj) 216 { 217 Status = AE_NO_MEMORY; 218 goto UnlockAndExit; 219 } 220 221 HandlerObj->Notify.Node = Node; 222 HandlerObj->Notify.HandlerType = HandlerType; 223 HandlerObj->Notify.Handler = Handler; 224 HandlerObj->Notify.Context = Context; 225 226 /* Install the handler at the list head(s) */ 227 228 for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) 229 { 230 if (HandlerType & (i+1)) 231 { 232 HandlerObj->Notify.Next[i] = 233 ObjDesc->CommonNotify.NotifyList[i]; 234 235 ObjDesc->CommonNotify.NotifyList[i] = HandlerObj; 236 } 237 } 238 239 /* Add an extra reference if handler was installed in both lists */ 240 241 if (HandlerType == ACPI_ALL_NOTIFY) 242 { 243 AcpiUtAddReference (HandlerObj); 244 } 245 246 247 UnlockAndExit: 248 (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE); 249 return_ACPI_STATUS (Status); 250 } 251 252 ACPI_EXPORT_SYMBOL (AcpiInstallNotifyHandler) 253 254 255 /******************************************************************************* 256 * 257 * FUNCTION: AcpiRemoveNotifyHandler 258 * 259 * PARAMETERS: Device - The device for which the handler is installed 260 * HandlerType - The type of handler: 261 * ACPI_SYSTEM_NOTIFY: System Handler (00-7F) 262 * ACPI_DEVICE_NOTIFY: Device Handler (80-FF) 263 * ACPI_ALL_NOTIFY: Both System and Device 264 * Handler - Address of the handler 265 * 266 * RETURN: Status 267 * 268 * DESCRIPTION: Remove a handler for notifies on an ACPI device 269 * 270 ******************************************************************************/ 271 272 ACPI_STATUS 273 AcpiRemoveNotifyHandler ( 274 ACPI_HANDLE Device, 275 UINT32 HandlerType, 276 ACPI_NOTIFY_HANDLER Handler) 277 { 278 ACPI_NAMESPACE_NODE *Node = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, Device); 279 ACPI_OPERAND_OBJECT *ObjDesc; 280 ACPI_OPERAND_OBJECT *HandlerObj; 281 ACPI_OPERAND_OBJECT *PreviousHandlerObj; 282 ACPI_STATUS Status = AE_OK; 283 UINT32 i; 284 285 286 ACPI_FUNCTION_TRACE (AcpiRemoveNotifyHandler); 287 288 289 /* Parameter validation */ 290 291 if ((!Device) || (!Handler) || (!HandlerType) || 292 (HandlerType > ACPI_MAX_NOTIFY_HANDLER_TYPE)) 293 { 294 return_ACPI_STATUS (AE_BAD_PARAMETER); 295 } 296 297 /* Root Object. Global handlers are removed here */ 298 299 if (Device == ACPI_ROOT_OBJECT) 300 { 301 for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) 302 { 303 if (HandlerType & (i+1)) 304 { 305 Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE); 306 if (ACPI_FAILURE (Status)) 307 { 308 return_ACPI_STATUS (Status); 309 } 310 311 if (!AcpiGbl_GlobalNotify[i].Handler || 312 (AcpiGbl_GlobalNotify[i].Handler != Handler)) 313 { 314 Status = AE_NOT_EXIST; 315 goto UnlockAndExit; 316 } 317 318 ACPI_DEBUG_PRINT ((ACPI_DB_INFO, 319 "Removing global notify handler\n")); 320 321 AcpiGbl_GlobalNotify[i].Handler = NULL; 322 AcpiGbl_GlobalNotify[i].Context = NULL; 323 324 (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE); 325 326 /* Make sure all deferred notify tasks are completed */ 327 328 AcpiOsWaitEventsComplete (); 329 } 330 } 331 332 return_ACPI_STATUS (AE_OK); 333 } 334 335 /* All other objects: Are Notifies allowed on this object? */ 336 337 if (!AcpiEvIsNotifyObject (Node)) 338 { 339 return_ACPI_STATUS (AE_TYPE); 340 } 341 342 /* Must have an existing internal object */ 343 344 ObjDesc = AcpiNsGetAttachedObject (Node); 345 if (!ObjDesc) 346 { 347 return_ACPI_STATUS (AE_NOT_EXIST); 348 } 349 350 /* Internal object exists. Find the handler and remove it */ 351 352 for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) 353 { 354 if (HandlerType & (i+1)) 355 { 356 Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE); 357 if (ACPI_FAILURE (Status)) 358 { 359 return_ACPI_STATUS (Status); 360 } 361 362 HandlerObj = ObjDesc->CommonNotify.NotifyList[i]; 363 PreviousHandlerObj = NULL; 364 365 /* Attempt to find the handler in the handler list */ 366 367 while (HandlerObj && 368 (HandlerObj->Notify.Handler != Handler)) 369 { 370 PreviousHandlerObj = HandlerObj; 371 HandlerObj = HandlerObj->Notify.Next[i]; 372 } 373 374 if (!HandlerObj) 375 { 376 Status = AE_NOT_EXIST; 377 goto UnlockAndExit; 378 } 379 380 /* Remove the handler object from the list */ 381 382 if (PreviousHandlerObj) /* Handler is not at the list head */ 383 { 384 PreviousHandlerObj->Notify.Next[i] = 385 HandlerObj->Notify.Next[i]; 386 } 387 else /* Handler is at the list head */ 388 { 389 ObjDesc->CommonNotify.NotifyList[i] = 390 HandlerObj->Notify.Next[i]; 391 } 392 393 (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE); 394 395 /* Make sure all deferred notify tasks are completed */ 396 397 AcpiOsWaitEventsComplete (); 398 AcpiUtRemoveReference (HandlerObj); 399 } 400 } 401 402 return_ACPI_STATUS (Status); 403 404 405 UnlockAndExit: 406 (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE); 407 return_ACPI_STATUS (Status); 408 } 409 410 ACPI_EXPORT_SYMBOL (AcpiRemoveNotifyHandler) 411 412 413 /******************************************************************************* 414 * 415 * FUNCTION: AcpiInstallExceptionHandler 416 * 417 * PARAMETERS: Handler - Pointer to the handler function for the 418 * event 419 * 420 * RETURN: Status 421 * 422 * DESCRIPTION: Saves the pointer to the handler function 423 * 424 ******************************************************************************/ 425 426 ACPI_STATUS 427 AcpiInstallExceptionHandler ( 428 ACPI_EXCEPTION_HANDLER Handler) 429 { 430 ACPI_STATUS Status; 431 432 433 ACPI_FUNCTION_TRACE (AcpiInstallExceptionHandler); 434 435 436 Status = AcpiUtAcquireMutex (ACPI_MTX_EVENTS); 437 if (ACPI_FAILURE (Status)) 438 { 439 return_ACPI_STATUS (Status); 440 } 441 442 /* Don't allow two handlers. */ 443 444 if (AcpiGbl_ExceptionHandler) 445 { 446 Status = AE_ALREADY_EXISTS; 447 goto Cleanup; 448 } 449 450 /* Install the handler */ 451 452 AcpiGbl_ExceptionHandler = Handler; 453 454 Cleanup: 455 (void) AcpiUtReleaseMutex (ACPI_MTX_EVENTS); 456 return_ACPI_STATUS (Status); 457 } 458 459 ACPI_EXPORT_SYMBOL (AcpiInstallExceptionHandler) 460 461 462 #if (!ACPI_REDUCED_HARDWARE) 463 /******************************************************************************* 464 * 465 * FUNCTION: AcpiInstallSciHandler 466 * 467 * PARAMETERS: Address - Address of the handler 468 * Context - Value passed to the handler on each SCI 469 * 470 * RETURN: Status 471 * 472 * DESCRIPTION: Install a handler for a System Control Interrupt. 473 * 474 ******************************************************************************/ 475 476 ACPI_STATUS 477 AcpiInstallSciHandler ( 478 ACPI_SCI_HANDLER Address, 479 void *Context) 480 { 481 ACPI_SCI_HANDLER_INFO *NewSciHandler; 482 ACPI_SCI_HANDLER_INFO *SciHandler; 483 ACPI_CPU_FLAGS Flags; 484 ACPI_STATUS Status; 485 486 487 ACPI_FUNCTION_TRACE (AcpiInstallSciHandler); 488 489 490 if (!Address) 491 { 492 return_ACPI_STATUS (AE_BAD_PARAMETER); 493 } 494 495 /* Allocate and init a handler object */ 496 497 NewSciHandler = ACPI_ALLOCATE (sizeof (ACPI_SCI_HANDLER_INFO)); 498 if (!NewSciHandler) 499 { 500 return_ACPI_STATUS (AE_NO_MEMORY); 501 } 502 503 NewSciHandler->Address = Address; 504 NewSciHandler->Context = Context; 505 506 Status = AcpiUtAcquireMutex (ACPI_MTX_EVENTS); 507 if (ACPI_FAILURE (Status)) 508 { 509 goto Exit; 510 } 511 512 /* Lock list during installation */ 513 514 Flags = AcpiOsAcquireLock (AcpiGbl_GpeLock); 515 SciHandler = AcpiGbl_SciHandlerList; 516 517 /* Ensure handler does not already exist */ 518 519 while (SciHandler) 520 { 521 if (Address == SciHandler->Address) 522 { 523 Status = AE_ALREADY_EXISTS; 524 goto UnlockAndExit; 525 } 526 527 SciHandler = SciHandler->Next; 528 } 529 530 /* Install the new handler into the global list (at head) */ 531 532 NewSciHandler->Next = AcpiGbl_SciHandlerList; 533 AcpiGbl_SciHandlerList = NewSciHandler; 534 535 536 UnlockAndExit: 537 538 AcpiOsReleaseLock (AcpiGbl_GpeLock, Flags); 539 (void) AcpiUtReleaseMutex (ACPI_MTX_EVENTS); 540 541 Exit: 542 if (ACPI_FAILURE (Status)) 543 { 544 ACPI_FREE (NewSciHandler); 545 } 546 return_ACPI_STATUS (Status); 547 } 548 549 ACPI_EXPORT_SYMBOL (AcpiInstallSciHandler) 550 551 552 /******************************************************************************* 553 * 554 * FUNCTION: AcpiRemoveSciHandler 555 * 556 * PARAMETERS: Address - Address of the handler 557 * 558 * RETURN: Status 559 * 560 * DESCRIPTION: Remove a handler for a System Control Interrupt. 561 * 562 ******************************************************************************/ 563 564 ACPI_STATUS 565 AcpiRemoveSciHandler ( 566 ACPI_SCI_HANDLER Address) 567 { 568 ACPI_SCI_HANDLER_INFO *PrevSciHandler; 569 ACPI_SCI_HANDLER_INFO *NextSciHandler; 570 ACPI_CPU_FLAGS Flags; 571 ACPI_STATUS Status; 572 573 574 ACPI_FUNCTION_TRACE (AcpiRemoveSciHandler); 575 576 577 if (!Address) 578 { 579 return_ACPI_STATUS (AE_BAD_PARAMETER); 580 } 581 582 Status = AcpiUtAcquireMutex (ACPI_MTX_EVENTS); 583 if (ACPI_FAILURE (Status)) 584 { 585 return_ACPI_STATUS (Status); 586 } 587 588 /* Remove the SCI handler with lock */ 589 590 Flags = AcpiOsAcquireLock (AcpiGbl_GpeLock); 591 592 PrevSciHandler = NULL; 593 NextSciHandler = AcpiGbl_SciHandlerList; 594 while (NextSciHandler) 595 { 596 if (NextSciHandler->Address == Address) 597 { 598 /* Unlink and free the SCI handler info block */ 599 600 if (PrevSciHandler) 601 { 602 PrevSciHandler->Next = NextSciHandler->Next; 603 } 604 else 605 { 606 AcpiGbl_SciHandlerList = NextSciHandler->Next; 607 } 608 609 AcpiOsReleaseLock (AcpiGbl_GpeLock, Flags); 610 ACPI_FREE (NextSciHandler); 611 goto UnlockAndExit; 612 } 613 614 PrevSciHandler = NextSciHandler; 615 NextSciHandler = NextSciHandler->Next; 616 } 617 618 AcpiOsReleaseLock (AcpiGbl_GpeLock, Flags); 619 Status = AE_NOT_EXIST; 620 621 622 UnlockAndExit: 623 (void) AcpiUtReleaseMutex (ACPI_MTX_EVENTS); 624 return_ACPI_STATUS (Status); 625 } 626 627 ACPI_EXPORT_SYMBOL (AcpiRemoveSciHandler) 628 629 630 /******************************************************************************* 631 * 632 * FUNCTION: AcpiInstallGlobalEventHandler 633 * 634 * PARAMETERS: Handler - Pointer to the global event handler function 635 * Context - Value passed to the handler on each event 636 * 637 * RETURN: Status 638 * 639 * DESCRIPTION: Saves the pointer to the handler function. The global handler 640 * is invoked upon each incoming GPE and Fixed Event. It is 641 * invoked at interrupt level at the time of the event dispatch. 642 * Can be used to update event counters, etc. 643 * 644 ******************************************************************************/ 645 646 ACPI_STATUS 647 AcpiInstallGlobalEventHandler ( 648 ACPI_GBL_EVENT_HANDLER Handler, 649 void *Context) 650 { 651 ACPI_STATUS Status; 652 653 654 ACPI_FUNCTION_TRACE (AcpiInstallGlobalEventHandler); 655 656 657 /* Parameter validation */ 658 659 if (!Handler) 660 { 661 return_ACPI_STATUS (AE_BAD_PARAMETER); 662 } 663 664 Status = AcpiUtAcquireMutex (ACPI_MTX_EVENTS); 665 if (ACPI_FAILURE (Status)) 666 { 667 return_ACPI_STATUS (Status); 668 } 669 670 /* Don't allow two handlers. */ 671 672 if (AcpiGbl_GlobalEventHandler) 673 { 674 Status = AE_ALREADY_EXISTS; 675 goto Cleanup; 676 } 677 678 AcpiGbl_GlobalEventHandler = Handler; 679 AcpiGbl_GlobalEventHandlerContext = Context; 680 681 682 Cleanup: 683 (void) AcpiUtReleaseMutex (ACPI_MTX_EVENTS); 684 return_ACPI_STATUS (Status); 685 } 686 687 ACPI_EXPORT_SYMBOL (AcpiInstallGlobalEventHandler) 688 689 690 /******************************************************************************* 691 * 692 * FUNCTION: AcpiInstallFixedEventHandler 693 * 694 * PARAMETERS: Event - Event type to enable. 695 * Handler - Pointer to the handler function for the 696 * event 697 * Context - Value passed to the handler on each GPE 698 * 699 * RETURN: Status 700 * 701 * DESCRIPTION: Saves the pointer to the handler function and then enables the 702 * event. 703 * 704 ******************************************************************************/ 705 706 ACPI_STATUS 707 AcpiInstallFixedEventHandler ( 708 UINT32 Event, 709 ACPI_EVENT_HANDLER Handler, 710 void *Context) 711 { 712 ACPI_STATUS Status; 713 714 715 ACPI_FUNCTION_TRACE (AcpiInstallFixedEventHandler); 716 717 718 /* Parameter validation */ 719 720 if (Event > ACPI_EVENT_MAX) 721 { 722 return_ACPI_STATUS (AE_BAD_PARAMETER); 723 } 724 725 Status = AcpiUtAcquireMutex (ACPI_MTX_EVENTS); 726 if (ACPI_FAILURE (Status)) 727 { 728 return_ACPI_STATUS (Status); 729 } 730 731 /* Do not allow multiple handlers */ 732 733 if (AcpiGbl_FixedEventHandlers[Event].Handler) 734 { 735 Status = AE_ALREADY_EXISTS; 736 goto Cleanup; 737 } 738 739 /* Install the handler before enabling the event */ 740 741 AcpiGbl_FixedEventHandlers[Event].Handler = Handler; 742 AcpiGbl_FixedEventHandlers[Event].Context = Context; 743 744 Status = AcpiEnableEvent (Event, 0); 745 if (ACPI_FAILURE (Status)) 746 { 747 ACPI_WARNING ((AE_INFO, 748 "Could not enable fixed event - %s (%u)", 749 AcpiUtGetEventName (Event), Event)); 750 751 /* Remove the handler */ 752 753 AcpiGbl_FixedEventHandlers[Event].Handler = NULL; 754 AcpiGbl_FixedEventHandlers[Event].Context = NULL; 755 } 756 else 757 { 758 ACPI_DEBUG_PRINT ((ACPI_DB_INFO, 759 "Enabled fixed event %s (%X), Handler=%p\n", 760 AcpiUtGetEventName (Event), Event, Handler)); 761 } 762 763 764 Cleanup: 765 (void) AcpiUtReleaseMutex (ACPI_MTX_EVENTS); 766 return_ACPI_STATUS (Status); 767 } 768 769 ACPI_EXPORT_SYMBOL (AcpiInstallFixedEventHandler) 770 771 772 /******************************************************************************* 773 * 774 * FUNCTION: AcpiRemoveFixedEventHandler 775 * 776 * PARAMETERS: Event - Event type to disable. 777 * Handler - Address of the handler 778 * 779 * RETURN: Status 780 * 781 * DESCRIPTION: Disables the event and unregisters the event handler. 782 * 783 ******************************************************************************/ 784 785 ACPI_STATUS 786 AcpiRemoveFixedEventHandler ( 787 UINT32 Event, 788 ACPI_EVENT_HANDLER Handler) 789 { 790 ACPI_STATUS Status = AE_OK; 791 792 793 ACPI_FUNCTION_TRACE (AcpiRemoveFixedEventHandler); 794 795 796 /* Parameter validation */ 797 798 if (Event > ACPI_EVENT_MAX) 799 { 800 return_ACPI_STATUS (AE_BAD_PARAMETER); 801 } 802 803 Status = AcpiUtAcquireMutex (ACPI_MTX_EVENTS); 804 if (ACPI_FAILURE (Status)) 805 { 806 return_ACPI_STATUS (Status); 807 } 808 809 /* Disable the event before removing the handler */ 810 811 Status = AcpiDisableEvent (Event, 0); 812 813 /* Always Remove the handler */ 814 815 AcpiGbl_FixedEventHandlers[Event].Handler = NULL; 816 AcpiGbl_FixedEventHandlers[Event].Context = NULL; 817 818 if (ACPI_FAILURE (Status)) 819 { 820 ACPI_WARNING ((AE_INFO, 821 "Could not disable fixed event - %s (%u)", 822 AcpiUtGetEventName (Event), Event)); 823 } 824 else 825 { 826 ACPI_DEBUG_PRINT ((ACPI_DB_INFO, 827 "Disabled fixed event - %s (%X)\n", 828 AcpiUtGetEventName (Event), Event)); 829 } 830 831 (void) AcpiUtReleaseMutex (ACPI_MTX_EVENTS); 832 return_ACPI_STATUS (Status); 833 } 834 835 ACPI_EXPORT_SYMBOL (AcpiRemoveFixedEventHandler) 836 837 838 /******************************************************************************* 839 * 840 * FUNCTION: AcpiEvInstallGpeHandler 841 * 842 * PARAMETERS: GpeDevice - Namespace node for the GPE (NULL for FADT 843 * defined GPEs) 844 * GpeNumber - The GPE number within the GPE block 845 * Type - Whether this GPE should be treated as an 846 * edge- or level-triggered interrupt. 847 * IsRawHandler - Whether this GPE should be handled using 848 * the special GPE handler mode. 849 * Address - Address of the handler 850 * Context - Value passed to the handler on each GPE 851 * 852 * RETURN: Status 853 * 854 * DESCRIPTION: Internal function to install a handler for a General Purpose 855 * Event. 856 * 857 ******************************************************************************/ 858 859 static ACPI_STATUS 860 AcpiEvInstallGpeHandler ( 861 ACPI_HANDLE GpeDevice, 862 UINT32 GpeNumber, 863 UINT32 Type, 864 BOOLEAN IsRawHandler, 865 ACPI_GPE_HANDLER Address, 866 void *Context) 867 { 868 ACPI_GPE_EVENT_INFO *GpeEventInfo; 869 ACPI_GPE_HANDLER_INFO *Handler; 870 ACPI_STATUS Status; 871 ACPI_CPU_FLAGS Flags; 872 873 874 ACPI_FUNCTION_TRACE (EvInstallGpeHandler); 875 876 877 /* Parameter validation */ 878 879 if ((!Address) || (Type & ~ACPI_GPE_XRUPT_TYPE_MASK)) 880 { 881 return_ACPI_STATUS (AE_BAD_PARAMETER); 882 } 883 884 Status = AcpiUtAcquireMutex (ACPI_MTX_EVENTS); 885 if (ACPI_FAILURE (Status)) 886 { 887 return_ACPI_STATUS (Status); 888 } 889 890 /* Allocate and init handler object (before lock) */ 891 892 Handler = ACPI_ALLOCATE_ZEROED (sizeof (ACPI_GPE_HANDLER_INFO)); 893 if (!Handler) 894 { 895 Status = AE_NO_MEMORY; 896 goto UnlockAndExit; 897 } 898 899 Flags = AcpiOsAcquireLock (AcpiGbl_GpeLock); 900 901 /* Ensure that we have a valid GPE number */ 902 903 GpeEventInfo = AcpiEvGetGpeEventInfo (GpeDevice, GpeNumber); 904 if (!GpeEventInfo) 905 { 906 Status = AE_BAD_PARAMETER; 907 goto FreeAndExit; 908 } 909 910 /* Make sure that there isn't a handler there already */ 911 912 if ((ACPI_GPE_DISPATCH_TYPE (GpeEventInfo->Flags) == 913 ACPI_GPE_DISPATCH_HANDLER) || 914 (ACPI_GPE_DISPATCH_TYPE (GpeEventInfo->Flags) == 915 ACPI_GPE_DISPATCH_RAW_HANDLER)) 916 { 917 Status = AE_ALREADY_EXISTS; 918 goto FreeAndExit; 919 } 920 921 Handler->Address = Address; 922 Handler->Context = Context; 923 Handler->MethodNode = GpeEventInfo->Dispatch.MethodNode; 924 Handler->OriginalFlags = (UINT8) (GpeEventInfo->Flags & 925 (ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK)); 926 927 /* 928 * If the GPE is associated with a method, it may have been enabled 929 * automatically during initialization, in which case it has to be 930 * disabled now to avoid spurious execution of the handler. 931 */ 932 if (((ACPI_GPE_DISPATCH_TYPE (Handler->OriginalFlags) == 933 ACPI_GPE_DISPATCH_METHOD) || 934 (ACPI_GPE_DISPATCH_TYPE (Handler->OriginalFlags) == 935 ACPI_GPE_DISPATCH_NOTIFY)) && 936 GpeEventInfo->RuntimeCount) 937 { 938 Handler->OriginallyEnabled = TRUE; 939 (void) AcpiEvRemoveGpeReference (GpeEventInfo); 940 941 /* Sanity check of original type against new type */ 942 943 if (Type != (UINT32) (GpeEventInfo->Flags & ACPI_GPE_XRUPT_TYPE_MASK)) 944 { 945 ACPI_WARNING ((AE_INFO, "GPE type mismatch (level/edge)")); 946 } 947 } 948 949 /* Install the handler */ 950 951 GpeEventInfo->Dispatch.Handler = Handler; 952 953 /* Setup up dispatch flags to indicate handler (vs. method/notify) */ 954 955 GpeEventInfo->Flags &= ~(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK); 956 GpeEventInfo->Flags |= (UINT8) (Type | (IsRawHandler ? 957 ACPI_GPE_DISPATCH_RAW_HANDLER : ACPI_GPE_DISPATCH_HANDLER)); 958 959 AcpiOsReleaseLock (AcpiGbl_GpeLock, Flags); 960 961 962 UnlockAndExit: 963 (void) AcpiUtReleaseMutex (ACPI_MTX_EVENTS); 964 return_ACPI_STATUS (Status); 965 966 FreeAndExit: 967 AcpiOsReleaseLock (AcpiGbl_GpeLock, Flags); 968 ACPI_FREE (Handler); 969 goto UnlockAndExit; 970 } 971 972 973 /******************************************************************************* 974 * 975 * FUNCTION: AcpiInstallGpeHandler 976 * 977 * PARAMETERS: GpeDevice - Namespace node for the GPE (NULL for FADT 978 * defined GPEs) 979 * GpeNumber - The GPE number within the GPE block 980 * Type - Whether this GPE should be treated as an 981 * edge- or level-triggered interrupt. 982 * Address - Address of the handler 983 * Context - Value passed to the handler on each GPE 984 * 985 * RETURN: Status 986 * 987 * DESCRIPTION: Install a handler for a General Purpose Event. 988 * 989 ******************************************************************************/ 990 991 ACPI_STATUS 992 AcpiInstallGpeHandler ( 993 ACPI_HANDLE GpeDevice, 994 UINT32 GpeNumber, 995 UINT32 Type, 996 ACPI_GPE_HANDLER Address, 997 void *Context) 998 { 999 ACPI_STATUS Status; 1000 1001 1002 ACPI_FUNCTION_TRACE (AcpiInstallGpeHandler); 1003 1004 1005 Status = AcpiEvInstallGpeHandler (GpeDevice, GpeNumber, Type, FALSE, 1006 Address, Context); 1007 1008 return_ACPI_STATUS (Status); 1009 } 1010 1011 ACPI_EXPORT_SYMBOL (AcpiInstallGpeHandler) 1012 1013 1014 /******************************************************************************* 1015 * 1016 * FUNCTION: AcpiInstallGpeRawHandler 1017 * 1018 * PARAMETERS: GpeDevice - Namespace node for the GPE (NULL for FADT 1019 * defined GPEs) 1020 * GpeNumber - The GPE number within the GPE block 1021 * Type - Whether this GPE should be treated as an 1022 * edge- or level-triggered interrupt. 1023 * Address - Address of the handler 1024 * Context - Value passed to the handler on each GPE 1025 * 1026 * RETURN: Status 1027 * 1028 * DESCRIPTION: Install a handler for a General Purpose Event. 1029 * 1030 ******************************************************************************/ 1031 1032 ACPI_STATUS 1033 AcpiInstallGpeRawHandler ( 1034 ACPI_HANDLE GpeDevice, 1035 UINT32 GpeNumber, 1036 UINT32 Type, 1037 ACPI_GPE_HANDLER Address, 1038 void *Context) 1039 { 1040 ACPI_STATUS Status; 1041 1042 1043 ACPI_FUNCTION_TRACE (AcpiInstallGpeRawHandler); 1044 1045 1046 Status = AcpiEvInstallGpeHandler (GpeDevice, GpeNumber, Type, TRUE, 1047 Address, Context); 1048 1049 return_ACPI_STATUS (Status); 1050 } 1051 1052 ACPI_EXPORT_SYMBOL (AcpiInstallGpeRawHandler) 1053 1054 1055 /******************************************************************************* 1056 * 1057 * FUNCTION: AcpiRemoveGpeHandler 1058 * 1059 * PARAMETERS: GpeDevice - Namespace node for the GPE (NULL for FADT 1060 * defined GPEs) 1061 * GpeNumber - The event to remove a handler 1062 * Address - Address of the handler 1063 * 1064 * RETURN: Status 1065 * 1066 * DESCRIPTION: Remove a handler for a General Purpose AcpiEvent. 1067 * 1068 ******************************************************************************/ 1069 1070 ACPI_STATUS 1071 AcpiRemoveGpeHandler ( 1072 ACPI_HANDLE GpeDevice, 1073 UINT32 GpeNumber, 1074 ACPI_GPE_HANDLER Address) 1075 { 1076 ACPI_GPE_EVENT_INFO *GpeEventInfo; 1077 ACPI_GPE_HANDLER_INFO *Handler; 1078 ACPI_STATUS Status; 1079 ACPI_CPU_FLAGS Flags; 1080 1081 1082 ACPI_FUNCTION_TRACE (AcpiRemoveGpeHandler); 1083 1084 1085 /* Parameter validation */ 1086 1087 if (!Address) 1088 { 1089 return_ACPI_STATUS (AE_BAD_PARAMETER); 1090 } 1091 1092 Status = AcpiUtAcquireMutex (ACPI_MTX_EVENTS); 1093 if (ACPI_FAILURE (Status)) 1094 { 1095 return_ACPI_STATUS (Status); 1096 } 1097 1098 Flags = AcpiOsAcquireLock (AcpiGbl_GpeLock); 1099 1100 /* Ensure that we have a valid GPE number */ 1101 1102 GpeEventInfo = AcpiEvGetGpeEventInfo (GpeDevice, GpeNumber); 1103 if (!GpeEventInfo) 1104 { 1105 Status = AE_BAD_PARAMETER; 1106 goto UnlockAndExit; 1107 } 1108 1109 /* Make sure that a handler is indeed installed */ 1110 1111 if ((ACPI_GPE_DISPATCH_TYPE (GpeEventInfo->Flags) != 1112 ACPI_GPE_DISPATCH_HANDLER) && 1113 (ACPI_GPE_DISPATCH_TYPE (GpeEventInfo->Flags) != 1114 ACPI_GPE_DISPATCH_RAW_HANDLER)) 1115 { 1116 Status = AE_NOT_EXIST; 1117 goto UnlockAndExit; 1118 } 1119 1120 /* Make sure that the installed handler is the same */ 1121 1122 if (GpeEventInfo->Dispatch.Handler->Address != Address) 1123 { 1124 Status = AE_BAD_PARAMETER; 1125 goto UnlockAndExit; 1126 } 1127 1128 /* Remove the handler */ 1129 1130 Handler = GpeEventInfo->Dispatch.Handler; 1131 GpeEventInfo->Dispatch.Handler = NULL; 1132 1133 /* Restore Method node (if any), set dispatch flags */ 1134 1135 GpeEventInfo->Dispatch.MethodNode = Handler->MethodNode; 1136 GpeEventInfo->Flags &= 1137 ~(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK); 1138 GpeEventInfo->Flags |= Handler->OriginalFlags; 1139 1140 /* 1141 * If the GPE was previously associated with a method and it was 1142 * enabled, it should be enabled at this point to restore the 1143 * post-initialization configuration. 1144 */ 1145 if (((ACPI_GPE_DISPATCH_TYPE (Handler->OriginalFlags) == 1146 ACPI_GPE_DISPATCH_METHOD) || 1147 (ACPI_GPE_DISPATCH_TYPE (Handler->OriginalFlags) == 1148 ACPI_GPE_DISPATCH_NOTIFY)) && 1149 Handler->OriginallyEnabled) 1150 { 1151 (void) AcpiEvAddGpeReference (GpeEventInfo); 1152 } 1153 1154 AcpiOsReleaseLock (AcpiGbl_GpeLock, Flags); 1155 (void) AcpiUtReleaseMutex (ACPI_MTX_EVENTS); 1156 1157 /* Make sure all deferred GPE tasks are completed */ 1158 1159 AcpiOsWaitEventsComplete (); 1160 1161 /* Now we can free the handler object */ 1162 1163 ACPI_FREE (Handler); 1164 return_ACPI_STATUS (Status); 1165 1166 UnlockAndExit: 1167 AcpiOsReleaseLock (AcpiGbl_GpeLock, Flags); 1168 (void) AcpiUtReleaseMutex (ACPI_MTX_EVENTS); 1169 return_ACPI_STATUS (Status); 1170 } 1171 1172 ACPI_EXPORT_SYMBOL (AcpiRemoveGpeHandler) 1173 1174 1175 /******************************************************************************* 1176 * 1177 * FUNCTION: AcpiAcquireGlobalLock 1178 * 1179 * PARAMETERS: Timeout - How long the caller is willing to wait 1180 * Handle - Where the handle to the lock is returned 1181 * (if acquired) 1182 * 1183 * RETURN: Status 1184 * 1185 * DESCRIPTION: Acquire the ACPI Global Lock 1186 * 1187 * Note: Allows callers with the same thread ID to acquire the global lock 1188 * multiple times. In other words, externally, the behavior of the global lock 1189 * is identical to an AML mutex. On the first acquire, a new handle is 1190 * returned. On any subsequent calls to acquire by the same thread, the same 1191 * handle is returned. 1192 * 1193 ******************************************************************************/ 1194 1195 ACPI_STATUS 1196 AcpiAcquireGlobalLock ( 1197 UINT16 Timeout, 1198 UINT32 *Handle) 1199 { 1200 ACPI_STATUS Status; 1201 1202 1203 if (!Handle) 1204 { 1205 return (AE_BAD_PARAMETER); 1206 } 1207 1208 /* Must lock interpreter to prevent race conditions */ 1209 1210 AcpiExEnterInterpreter (); 1211 1212 Status = AcpiExAcquireMutexObject (Timeout, 1213 AcpiGbl_GlobalLockMutex, AcpiOsGetThreadId ()); 1214 1215 if (ACPI_SUCCESS (Status)) 1216 { 1217 /* Return the global lock handle (updated in AcpiEvAcquireGlobalLock) */ 1218 1219 *Handle = AcpiGbl_GlobalLockHandle; 1220 } 1221 1222 AcpiExExitInterpreter (); 1223 return (Status); 1224 } 1225 1226 ACPI_EXPORT_SYMBOL (AcpiAcquireGlobalLock) 1227 1228 1229 /******************************************************************************* 1230 * 1231 * FUNCTION: AcpiReleaseGlobalLock 1232 * 1233 * PARAMETERS: Handle - Returned from AcpiAcquireGlobalLock 1234 * 1235 * RETURN: Status 1236 * 1237 * DESCRIPTION: Release the ACPI Global Lock. The handle must be valid. 1238 * 1239 ******************************************************************************/ 1240 1241 ACPI_STATUS 1242 AcpiReleaseGlobalLock ( 1243 UINT32 Handle) 1244 { 1245 ACPI_STATUS Status; 1246 1247 1248 if (!Handle || (Handle != AcpiGbl_GlobalLockHandle)) 1249 { 1250 return (AE_NOT_ACQUIRED); 1251 } 1252 1253 Status = AcpiExReleaseMutexObject (AcpiGbl_GlobalLockMutex); 1254 return (Status); 1255 } 1256 1257 ACPI_EXPORT_SYMBOL (AcpiReleaseGlobalLock) 1258 1259 #endif /* !ACPI_REDUCED_HARDWARE */ 1260