xref: /freebsd/sys/contrib/dev/acpica/compiler/dtutils.c (revision a98ff317388a00b992f1bf8404dee596f9383f5e)
1 /******************************************************************************
2  *
3  * Module Name: dtutils.c - Utility routines for the data table compiler
4  *
5  *****************************************************************************/
6 
7 /*
8  * Copyright (C) 2000 - 2013, Intel Corp.
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43 
44 #define __DTUTILS_C__
45 
46 #include <contrib/dev/acpica/compiler/aslcompiler.h>
47 #include <contrib/dev/acpica/compiler/dtcompiler.h>
48 #include <contrib/dev/acpica/include/actables.h>
49 
50 #define _COMPONENT          DT_COMPILER
51         ACPI_MODULE_NAME    ("dtutils")
52 
53 /* Local prototypes */
54 
55 static void
56 DtSum (
57     DT_SUBTABLE             *Subtable,
58     void                    *Context,
59     void                    *ReturnValue);
60 
61 
62 /******************************************************************************
63  *
64  * FUNCTION:    DtError
65  *
66  * PARAMETERS:  Level               - Seriousness (Warning/error, etc.)
67  *              MessageId           - Index into global message buffer
68  *              Op                  - Parse node where error happened
69  *              ExtraMessage        - additional error message
70  *
71  * RETURN:      None
72  *
73  * DESCRIPTION: Common error interface for data table compiler
74  *
75  *****************************************************************************/
76 
77 void
78 DtError (
79     UINT8                   Level,
80     UINT8                   MessageId,
81     DT_FIELD                *FieldObject,
82     char                    *ExtraMessage)
83 {
84 
85     /* Check if user wants to ignore this exception */
86 
87     if (AslIsExceptionDisabled (Level, MessageId))
88     {
89         return;
90     }
91 
92     if (FieldObject)
93     {
94         AslCommonError (Level, MessageId,
95             FieldObject->Line,
96             FieldObject->Line,
97             FieldObject->ByteOffset,
98             FieldObject->Column,
99             Gbl_Files[ASL_FILE_INPUT].Filename, ExtraMessage);
100     }
101     else
102     {
103         AslCommonError (Level, MessageId, 0,
104             0, 0, 0, 0, ExtraMessage);
105     }
106 }
107 
108 
109 /******************************************************************************
110  *
111  * FUNCTION:    DtNameError
112  *
113  * PARAMETERS:  Level               - Seriousness (Warning/error, etc.)
114  *              MessageId           - Index into global message buffer
115  *              Op                  - Parse node where error happened
116  *              ExtraMessage        - additional error message
117  *
118  * RETURN:      None
119  *
120  * DESCRIPTION: Error interface for named objects
121  *
122  *****************************************************************************/
123 
124 void
125 DtNameError (
126     UINT8                   Level,
127     UINT8                   MessageId,
128     DT_FIELD                *FieldObject,
129     char                    *ExtraMessage)
130 {
131 
132     switch (Level)
133     {
134     case ASL_WARNING2:
135     case ASL_WARNING3:
136 
137         if (Gbl_WarningLevel < Level)
138         {
139             return;
140         }
141         break;
142 
143     default:
144 
145         break;
146     }
147 
148     if (FieldObject)
149     {
150         AslCommonError (Level, MessageId,
151             FieldObject->Line,
152             FieldObject->Line,
153             FieldObject->ByteOffset,
154             FieldObject->NameColumn,
155             Gbl_Files[ASL_FILE_INPUT].Filename, ExtraMessage);
156     }
157     else
158     {
159         AslCommonError (Level, MessageId, 0,
160             0, 0, 0, 0, ExtraMessage);
161     }
162 }
163 
164 
165 /*******************************************************************************
166  *
167  * FUNCTION:    DtFatal
168  *
169  * PARAMETERS:  None
170  *
171  * RETURN:      None
172  *
173  * DESCRIPTION: Dump the error log and abort the compiler. Used for serious
174  *              compile or I/O errors
175  *
176  ******************************************************************************/
177 
178 void
179 DtFatal (
180     UINT8                   MessageId,
181     DT_FIELD                *FieldObject,
182     char                    *ExtraMessage)
183 {
184 
185     DtError (ASL_ERROR, MessageId, FieldObject, ExtraMessage);
186 
187 /*
188  * TBD: remove this entire function, DtFatal
189  *
190  * We cannot abort the compiler on error, because we may be compiling a
191  * list of files. We must move on to the next file.
192  */
193 #ifdef __OBSOLETE
194     CmCleanupAndExit ();
195     exit (1);
196 #endif
197 }
198 
199 
200 /******************************************************************************
201  *
202  * FUNCTION:    DtStrtoul64
203  *
204  * PARAMETERS:  String              - Null terminated string
205  *              ReturnInteger       - Where the converted integer is returned
206  *
207  * RETURN:      Status
208  *
209  * DESCRIPTION: Simple conversion of a string hex integer constant to unsigned
210  *              value. Assumes no leading "0x" for the constant.
211  *
212  * Portability note: The reason this function exists is because a 64-bit
213  * sscanf is not available in all environments.
214  *
215  *****************************************************************************/
216 
217 ACPI_STATUS
218 DtStrtoul64 (
219     char                    *String,
220     UINT64                  *ReturnInteger)
221 {
222     char                    *ThisChar = String;
223     UINT32                  ThisDigit;
224     UINT64                  ReturnValue = 0;
225     int                     DigitCount = 0;
226 
227 
228     /* Skip over any white space in the buffer */
229 
230     while ((*ThisChar == ' ') || (*ThisChar == '\t'))
231     {
232         ThisChar++;
233     }
234 
235     /* Skip leading zeros */
236 
237     while ((*ThisChar) == '0')
238     {
239         ThisChar++;
240     }
241 
242     /* Convert character-by-character */
243 
244     while (*ThisChar)
245     {
246         if (ACPI_IS_DIGIT (*ThisChar))
247         {
248             /* Convert ASCII 0-9 to Decimal value */
249 
250             ThisDigit = ((UINT8) *ThisChar) - '0';
251         }
252         else /* Letter */
253         {
254             ThisDigit = (UINT32) ACPI_TOUPPER (*ThisChar);
255             if (!ACPI_IS_XDIGIT ((char) ThisDigit))
256             {
257                 /* Not A-F */
258 
259                 return (AE_BAD_CHARACTER);
260             }
261 
262             /* Convert ASCII Hex char (A-F) to value */
263 
264             ThisDigit = (ThisDigit - 'A') + 10;
265         }
266 
267         /* Insert the 4-bit hex digit */
268 
269         ReturnValue <<= 4;
270         ReturnValue += ThisDigit;
271 
272         ThisChar++;
273         DigitCount++;
274         if (DigitCount > 16)
275         {
276             /* Value is too large (> 64 bits/8 bytes/16 hex digits) */
277 
278             return (AE_LIMIT);
279         }
280     }
281 
282     *ReturnInteger = ReturnValue;
283     return (AE_OK);
284 }
285 
286 
287 /******************************************************************************
288  *
289  * FUNCTION:    DtGetFileSize
290  *
291  * PARAMETERS:  Handle              - Open file handler
292  *
293  * RETURN:      Current file size
294  *
295  * DESCRIPTION: Get the current size of a file. Seek to the EOF and get the
296  *              offset. Seek back to the original location.
297  *
298  *****************************************************************************/
299 
300 UINT32
301 DtGetFileSize (
302     FILE                    *Handle)
303 {
304     int                     CurrentOffset;
305     int                     LastOffset;
306 
307 
308     CurrentOffset = ftell (Handle);
309     fseek (Handle, 0, SEEK_END);
310     LastOffset = ftell (Handle);
311     fseek (Handle, CurrentOffset, SEEK_SET);
312 
313     return ((UINT32) LastOffset);
314 }
315 
316 
317 /******************************************************************************
318  *
319  * FUNCTION:    DtGetFieldValue
320  *
321  * PARAMETERS:  Field               - Current field list pointer
322  *
323  * RETURN:      Field value
324  *
325  * DESCRIPTION: Get field value
326  *
327  *****************************************************************************/
328 
329 char *
330 DtGetFieldValue (
331     DT_FIELD                *Field)
332 {
333     if (!Field)
334     {
335         return (NULL);
336     }
337 
338     return (Field->Value);
339 }
340 
341 
342 /******************************************************************************
343  *
344  * FUNCTION:    DtGetFieldType
345  *
346  * PARAMETERS:  Info                - Data table info
347  *
348  * RETURN:      Field type
349  *
350  * DESCRIPTION: Get field type
351  *
352  *****************************************************************************/
353 
354 UINT8
355 DtGetFieldType (
356     ACPI_DMTABLE_INFO       *Info)
357 {
358     UINT8                   Type;
359 
360 
361     /* DT_FLAG means that this is the start of a block of flag bits */
362     /* TBD - we can make these a separate opcode later */
363 
364     if (Info->Flags & DT_FLAG)
365     {
366         return (DT_FIELD_TYPE_FLAGS_INTEGER);
367     }
368 
369     /* Type is based upon the opcode for this field in the info table */
370 
371     switch (Info->Opcode)
372     {
373     case ACPI_DMT_FLAG0:
374     case ACPI_DMT_FLAG1:
375     case ACPI_DMT_FLAG2:
376     case ACPI_DMT_FLAG3:
377     case ACPI_DMT_FLAG4:
378     case ACPI_DMT_FLAG5:
379     case ACPI_DMT_FLAG6:
380     case ACPI_DMT_FLAG7:
381     case ACPI_DMT_FLAGS0:
382     case ACPI_DMT_FLAGS1:
383     case ACPI_DMT_FLAGS2:
384     case ACPI_DMT_FLAGS4:
385 
386         Type = DT_FIELD_TYPE_FLAG;
387         break;
388 
389     case ACPI_DMT_NAME4:
390     case ACPI_DMT_SIG:
391     case ACPI_DMT_NAME6:
392     case ACPI_DMT_NAME8:
393     case ACPI_DMT_STRING:
394 
395         Type = DT_FIELD_TYPE_STRING;
396         break;
397 
398     case ACPI_DMT_BUFFER:
399     case ACPI_DMT_BUF7:
400     case ACPI_DMT_BUF10:
401     case ACPI_DMT_BUF16:
402     case ACPI_DMT_BUF128:
403     case ACPI_DMT_PCI_PATH:
404 
405         Type = DT_FIELD_TYPE_BUFFER;
406         break;
407 
408     case ACPI_DMT_GAS:
409     case ACPI_DMT_HESTNTFY:
410 
411         Type = DT_FIELD_TYPE_INLINE_SUBTABLE;
412         break;
413 
414     case ACPI_DMT_UNICODE:
415 
416         Type = DT_FIELD_TYPE_UNICODE;
417         break;
418 
419     case ACPI_DMT_UUID:
420 
421         Type = DT_FIELD_TYPE_UUID;
422         break;
423 
424     case ACPI_DMT_DEVICE_PATH:
425 
426         Type = DT_FIELD_TYPE_DEVICE_PATH;
427         break;
428 
429     case ACPI_DMT_LABEL:
430 
431         Type = DT_FIELD_TYPE_LABEL;
432         break;
433 
434     default:
435 
436         Type = DT_FIELD_TYPE_INTEGER;
437         break;
438     }
439 
440     return (Type);
441 }
442 
443 
444 /******************************************************************************
445  *
446  * FUNCTION:    DtGetBufferLength
447  *
448  * PARAMETERS:  Buffer              - List of integers,
449  *                                    for example "10 3A 4F 2E"
450  *
451  * RETURN:      Count of integer
452  *
453  * DESCRIPTION: Get length of bytes needed to store the integers
454  *
455  *****************************************************************************/
456 
457 UINT32
458 DtGetBufferLength (
459     char                    *Buffer)
460 {
461     UINT32                  ByteLength = 0;
462 
463 
464     while (*Buffer)
465     {
466         if (*Buffer == ' ')
467         {
468             ByteLength++;
469 
470             while (*Buffer == ' ')
471             {
472                 Buffer++;
473             }
474         }
475 
476         Buffer++;
477     }
478 
479     return (++ByteLength);
480 }
481 
482 
483 /******************************************************************************
484  *
485  * FUNCTION:    DtGetFieldLength
486  *
487  * PARAMETERS:  Field               - Current field
488  *              Info                - Data table info
489  *
490  * RETURN:      Field length
491  *
492  * DESCRIPTION: Get length of bytes needed to compile the field
493  *
494  * Note: This function must remain in sync with AcpiDmDumpTable.
495  *
496  *****************************************************************************/
497 
498 UINT32
499 DtGetFieldLength (
500     DT_FIELD                *Field,
501     ACPI_DMTABLE_INFO       *Info)
502 {
503     UINT32                  ByteLength = 0;
504     char                    *Value;
505 
506 
507     /* Length is based upon the opcode for this field in the info table */
508 
509     switch (Info->Opcode)
510     {
511     case ACPI_DMT_FLAG0:
512     case ACPI_DMT_FLAG1:
513     case ACPI_DMT_FLAG2:
514     case ACPI_DMT_FLAG3:
515     case ACPI_DMT_FLAG4:
516     case ACPI_DMT_FLAG5:
517     case ACPI_DMT_FLAG6:
518     case ACPI_DMT_FLAG7:
519     case ACPI_DMT_FLAGS0:
520     case ACPI_DMT_FLAGS1:
521     case ACPI_DMT_FLAGS2:
522     case ACPI_DMT_FLAGS4:
523     case ACPI_DMT_LABEL:
524     case ACPI_DMT_EXTRA_TEXT:
525 
526         ByteLength = 0;
527         break;
528 
529     case ACPI_DMT_UINT8:
530     case ACPI_DMT_CHKSUM:
531     case ACPI_DMT_SPACEID:
532     case ACPI_DMT_ACCWIDTH:
533     case ACPI_DMT_IVRS:
534     case ACPI_DMT_MADT:
535     case ACPI_DMT_PMTT:
536     case ACPI_DMT_SRAT:
537     case ACPI_DMT_ASF:
538     case ACPI_DMT_HESTNTYP:
539     case ACPI_DMT_FADTPM:
540     case ACPI_DMT_EINJACT:
541     case ACPI_DMT_EINJINST:
542     case ACPI_DMT_ERSTACT:
543     case ACPI_DMT_ERSTINST:
544 
545         ByteLength = 1;
546         break;
547 
548     case ACPI_DMT_UINT16:
549     case ACPI_DMT_DMAR:
550     case ACPI_DMT_HEST:
551     case ACPI_DMT_PCI_PATH:
552 
553         ByteLength = 2;
554         break;
555 
556     case ACPI_DMT_UINT24:
557 
558         ByteLength = 3;
559         break;
560 
561     case ACPI_DMT_UINT32:
562     case ACPI_DMT_NAME4:
563     case ACPI_DMT_SLIC:
564     case ACPI_DMT_SIG:
565 
566         ByteLength = 4;
567         break;
568 
569     case ACPI_DMT_UINT40:
570 
571         ByteLength = 5;
572         break;
573 
574     case ACPI_DMT_UINT48:
575     case ACPI_DMT_NAME6:
576 
577         ByteLength = 6;
578         break;
579 
580     case ACPI_DMT_UINT56:
581     case ACPI_DMT_BUF7:
582 
583         ByteLength = 7;
584         break;
585 
586     case ACPI_DMT_UINT64:
587     case ACPI_DMT_NAME8:
588 
589         ByteLength = 8;
590         break;
591 
592     case ACPI_DMT_STRING:
593 
594         Value = DtGetFieldValue (Field);
595         if (Value)
596         {
597             ByteLength = ACPI_STRLEN (Value) + 1;
598         }
599         else
600         {   /* At this point, this is a fatal error */
601 
602             sprintf (MsgBuffer, "Expected \"%s\"", Info->Name);
603             DtFatal (ASL_MSG_COMPILER_INTERNAL, NULL, MsgBuffer);
604             return (0);
605         }
606         break;
607 
608     case ACPI_DMT_GAS:
609 
610         ByteLength = sizeof (ACPI_GENERIC_ADDRESS);
611         break;
612 
613     case ACPI_DMT_HESTNTFY:
614 
615         ByteLength = sizeof (ACPI_HEST_NOTIFY);
616         break;
617 
618     case ACPI_DMT_BUFFER:
619 
620         Value = DtGetFieldValue (Field);
621         if (Value)
622         {
623             ByteLength = DtGetBufferLength (Value);
624         }
625         else
626         {   /* At this point, this is a fatal error */
627 
628             sprintf (MsgBuffer, "Expected \"%s\"", Info->Name);
629             DtFatal (ASL_MSG_COMPILER_INTERNAL, NULL, MsgBuffer);
630             return (0);
631         }
632         break;
633 
634     case ACPI_DMT_BUF10:
635 
636         ByteLength = 10;
637         break;
638 
639     case ACPI_DMT_BUF16:
640     case ACPI_DMT_UUID:
641 
642         ByteLength = 16;
643         break;
644 
645     case ACPI_DMT_BUF128:
646 
647         ByteLength = 128;
648         break;
649 
650     case ACPI_DMT_UNICODE:
651 
652         Value = DtGetFieldValue (Field);
653 
654         /* TBD: error if Value is NULL? (as below?) */
655 
656         ByteLength = (ACPI_STRLEN (Value) + 1) * sizeof(UINT16);
657         break;
658 
659     default:
660 
661         DtFatal (ASL_MSG_COMPILER_INTERNAL, Field, "Invalid table opcode");
662         return (0);
663     }
664 
665     return (ByteLength);
666 }
667 
668 
669 /******************************************************************************
670  *
671  * FUNCTION:    DtSum
672  *
673  * PARAMETERS:  DT_WALK_CALLBACK:
674  *              Subtable            - Subtable
675  *              Context             - Unused
676  *              ReturnValue         - Store the checksum of subtable
677  *
678  * RETURN:      Status
679  *
680  * DESCRIPTION: Get the checksum of subtable
681  *
682  *****************************************************************************/
683 
684 static void
685 DtSum (
686     DT_SUBTABLE             *Subtable,
687     void                    *Context,
688     void                    *ReturnValue)
689 {
690     UINT8                   Checksum;
691     UINT8                   *Sum = ReturnValue;
692 
693 
694     Checksum = AcpiTbChecksum (Subtable->Buffer, Subtable->Length);
695     *Sum = (UINT8) (*Sum + Checksum);
696 }
697 
698 
699 /******************************************************************************
700  *
701  * FUNCTION:    DtSetTableChecksum
702  *
703  * PARAMETERS:  ChecksumPointer     - Where to return the checksum
704  *
705  * RETURN:      None
706  *
707  * DESCRIPTION: Set checksum of the whole data table into the checksum field
708  *
709  *****************************************************************************/
710 
711 void
712 DtSetTableChecksum (
713     UINT8                   *ChecksumPointer)
714 {
715     UINT8                   Checksum = 0;
716     UINT8                   OldSum;
717 
718 
719     DtWalkTableTree (Gbl_RootTable, DtSum, NULL, &Checksum);
720 
721     OldSum = *ChecksumPointer;
722     Checksum = (UINT8) (Checksum - OldSum);
723 
724     /* Compute the final checksum */
725 
726     Checksum = (UINT8) (0 - Checksum);
727     *ChecksumPointer = Checksum;
728 }
729 
730 
731 /******************************************************************************
732  *
733  * FUNCTION:    DtSetTableLength
734  *
735  * PARAMETERS:  None
736  *
737  * RETURN:      None
738  *
739  * DESCRIPTION: Walk the subtables and set all the length fields
740  *
741  *****************************************************************************/
742 
743 void
744 DtSetTableLength (
745     void)
746 {
747     DT_SUBTABLE             *ParentTable;
748     DT_SUBTABLE             *ChildTable;
749 
750 
751     ParentTable = Gbl_RootTable;
752     ChildTable = NULL;
753 
754     if (!ParentTable)
755     {
756         return;
757     }
758 
759     DtSetSubtableLength (ParentTable);
760 
761     while (1)
762     {
763         ChildTable = DtGetNextSubtable (ParentTable, ChildTable);
764         if (ChildTable)
765         {
766             if (ChildTable->LengthField)
767             {
768                 DtSetSubtableLength (ChildTable);
769             }
770 
771             if (ChildTable->Child)
772             {
773                 ParentTable = ChildTable;
774                 ChildTable = NULL;
775             }
776             else
777             {
778                 ParentTable->TotalLength += ChildTable->TotalLength;
779                 if (ParentTable->LengthField)
780                 {
781                     DtSetSubtableLength (ParentTable);
782                 }
783             }
784         }
785         else
786         {
787             ChildTable = ParentTable;
788 
789             if (ChildTable == Gbl_RootTable)
790             {
791                 break;
792             }
793 
794             ParentTable = DtGetParentSubtable (ParentTable);
795 
796             ParentTable->TotalLength += ChildTable->TotalLength;
797             if (ParentTable->LengthField)
798             {
799                 DtSetSubtableLength (ParentTable);
800             }
801         }
802     }
803 }
804 
805 
806 /******************************************************************************
807  *
808  * FUNCTION:    DtWalkTableTree
809  *
810  * PARAMETERS:  StartTable          - Subtable in the tree where walking begins
811  *              UserFunction        - Called during the walk
812  *              Context             - Passed to user function
813  *              ReturnValue         - The return value of UserFunction
814  *
815  * RETURN:      None
816  *
817  * DESCRIPTION: Performs a depth-first walk of the subtable tree
818  *
819  *****************************************************************************/
820 
821 void
822 DtWalkTableTree (
823     DT_SUBTABLE             *StartTable,
824     DT_WALK_CALLBACK        UserFunction,
825     void                    *Context,
826     void                    *ReturnValue)
827 {
828     DT_SUBTABLE             *ParentTable;
829     DT_SUBTABLE             *ChildTable;
830 
831 
832     ParentTable = StartTable;
833     ChildTable = NULL;
834 
835     if (!ParentTable)
836     {
837         return;
838     }
839 
840     UserFunction (ParentTable, Context, ReturnValue);
841 
842     while (1)
843     {
844         ChildTable = DtGetNextSubtable (ParentTable, ChildTable);
845         if (ChildTable)
846         {
847             UserFunction (ChildTable, Context, ReturnValue);
848 
849             if (ChildTable->Child)
850             {
851                 ParentTable = ChildTable;
852                 ChildTable = NULL;
853             }
854         }
855         else
856         {
857             ChildTable = ParentTable;
858             if (ChildTable == Gbl_RootTable)
859             {
860                 break;
861             }
862 
863             ParentTable = DtGetParentSubtable (ParentTable);
864 
865             if (ChildTable->Peer == StartTable)
866             {
867                 break;
868             }
869         }
870     }
871 }
872 
873 
874 /******************************************************************************
875  *
876  * FUNCTION:    DtFreeFieldList
877  *
878  * PARAMETERS:  None
879  *
880  * RETURN:      None
881  *
882  * DESCRIPTION: Free the field list
883  *
884  *****************************************************************************/
885 
886 void
887 DtFreeFieldList (
888     void)
889 {
890     DT_FIELD                *Field = Gbl_FieldList;
891     DT_FIELD                *NextField;
892 
893 
894     /* Walk and free entire field list */
895 
896     while (Field)
897     {
898         NextField = Field->Next; /* Save link */
899 
900         if (!(Field->Flags & DT_FIELD_NOT_ALLOCATED))
901         {
902             ACPI_FREE (Field->Name);
903             ACPI_FREE (Field->Value);
904         }
905 
906         ACPI_FREE (Field);
907         Field = NextField;
908     }
909 }
910