xref: /freebsd/sys/contrib/dev/acpica/compiler/dtutils.c (revision 7d99ab9fd0cc2c1ce2ecef0ed6d0672c2a50b0cb)
1 /******************************************************************************
2  *
3  * Module Name: dtutils.c - Utility routines for the data table compiler
4  *
5  *****************************************************************************/
6 
7 /*
8  * Copyright (C) 2000 - 2013, Intel Corp.
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43 
44 #define __DTUTILS_C__
45 
46 #include <contrib/dev/acpica/compiler/aslcompiler.h>
47 #include <contrib/dev/acpica/compiler/dtcompiler.h>
48 #include <contrib/dev/acpica/include/actables.h>
49 
50 #define _COMPONENT          DT_COMPILER
51         ACPI_MODULE_NAME    ("dtutils")
52 
53 /* Local prototypes */
54 
55 static void
56 DtSum (
57     DT_SUBTABLE             *Subtable,
58     void                    *Context,
59     void                    *ReturnValue);
60 
61 
62 /******************************************************************************
63  *
64  * FUNCTION:    DtError
65  *
66  * PARAMETERS:  Level               - Seriousness (Warning/error, etc.)
67  *              MessageId           - Index into global message buffer
68  *              Op                  - Parse node where error happened
69  *              ExtraMessage        - additional error message
70  *
71  * RETURN:      None
72  *
73  * DESCRIPTION: Common error interface for data table compiler
74  *
75  *****************************************************************************/
76 
77 void
78 DtError (
79     UINT8                   Level,
80     UINT8                   MessageId,
81     DT_FIELD                *FieldObject,
82     char                    *ExtraMessage)
83 {
84 
85     /* Check if user wants to ignore this exception */
86 
87     if (AslIsExceptionDisabled (Level, MessageId))
88     {
89         return;
90     }
91 
92     if (FieldObject)
93     {
94         AslCommonError (Level, MessageId,
95             FieldObject->Line,
96             FieldObject->Line,
97             FieldObject->ByteOffset,
98             FieldObject->Column,
99             Gbl_Files[ASL_FILE_INPUT].Filename, ExtraMessage);
100     }
101     else
102     {
103         AslCommonError (Level, MessageId, 0,
104             0, 0, 0, 0, ExtraMessage);
105     }
106 }
107 
108 
109 /******************************************************************************
110  *
111  * FUNCTION:    DtNameError
112  *
113  * PARAMETERS:  Level               - Seriousness (Warning/error, etc.)
114  *              MessageId           - Index into global message buffer
115  *              Op                  - Parse node where error happened
116  *              ExtraMessage        - additional error message
117  *
118  * RETURN:      None
119  *
120  * DESCRIPTION: Error interface for named objects
121  *
122  *****************************************************************************/
123 
124 void
125 DtNameError (
126     UINT8                   Level,
127     UINT8                   MessageId,
128     DT_FIELD                *FieldObject,
129     char                    *ExtraMessage)
130 {
131 
132     switch (Level)
133     {
134     case ASL_WARNING2:
135     case ASL_WARNING3:
136 
137         if (Gbl_WarningLevel < Level)
138         {
139             return;
140         }
141         break;
142 
143     default:
144 
145         break;
146     }
147 
148     if (FieldObject)
149     {
150         AslCommonError (Level, MessageId,
151             FieldObject->Line,
152             FieldObject->Line,
153             FieldObject->ByteOffset,
154             FieldObject->NameColumn,
155             Gbl_Files[ASL_FILE_INPUT].Filename, ExtraMessage);
156     }
157     else
158     {
159         AslCommonError (Level, MessageId, 0,
160             0, 0, 0, 0, ExtraMessage);
161     }
162 }
163 
164 
165 /*******************************************************************************
166  *
167  * FUNCTION:    DtFatal
168  *
169  * PARAMETERS:  None
170  *
171  * RETURN:      None
172  *
173  * DESCRIPTION: Dump the error log and abort the compiler. Used for serious
174  *              compile or I/O errors
175  *
176  ******************************************************************************/
177 
178 void
179 DtFatal (
180     UINT8                   MessageId,
181     DT_FIELD                *FieldObject,
182     char                    *ExtraMessage)
183 {
184 
185     DtError (ASL_ERROR, MessageId, FieldObject, ExtraMessage);
186 
187 /*
188  * TBD: remove this entire function, DtFatal
189  *
190  * We cannot abort the compiler on error, because we may be compiling a
191  * list of files. We must move on to the next file.
192  */
193 #ifdef __OBSOLETE
194     CmCleanupAndExit ();
195     exit (1);
196 #endif
197 }
198 
199 
200 /******************************************************************************
201  *
202  * FUNCTION:    DtStrtoul64
203  *
204  * PARAMETERS:  String              - Null terminated string
205  *              ReturnInteger       - Where the converted integer is returned
206  *
207  * RETURN:      Status
208  *
209  * DESCRIPTION: Simple conversion of a string hex integer constant to unsigned
210  *              value. Assumes no leading "0x" for the constant.
211  *
212  * Portability note: The reason this function exists is because a 64-bit
213  * sscanf is not available in all environments.
214  *
215  *****************************************************************************/
216 
217 ACPI_STATUS
218 DtStrtoul64 (
219     char                    *String,
220     UINT64                  *ReturnInteger)
221 {
222     char                    *ThisChar = String;
223     UINT32                  ThisDigit;
224     UINT64                  ReturnValue = 0;
225     int                     DigitCount = 0;
226 
227 
228     /* Skip over any white space in the buffer */
229 
230     while ((*ThisChar == ' ') || (*ThisChar == '\t'))
231     {
232         ThisChar++;
233     }
234 
235     /* Skip leading zeros */
236 
237     while ((*ThisChar) == '0')
238     {
239         ThisChar++;
240     }
241 
242     /* Convert character-by-character */
243 
244     while (*ThisChar)
245     {
246         if (ACPI_IS_DIGIT (*ThisChar))
247         {
248             /* Convert ASCII 0-9 to Decimal value */
249 
250             ThisDigit = ((UINT8) *ThisChar) - '0';
251         }
252         else /* Letter */
253         {
254             ThisDigit = (UINT32) ACPI_TOUPPER (*ThisChar);
255             if (!ACPI_IS_XDIGIT ((char) ThisDigit))
256             {
257                 /* Not A-F */
258 
259                 return (AE_BAD_CHARACTER);
260             }
261 
262             /* Convert ASCII Hex char (A-F) to value */
263 
264             ThisDigit = (ThisDigit - 'A') + 10;
265         }
266 
267         /* Insert the 4-bit hex digit */
268 
269         ReturnValue <<= 4;
270         ReturnValue += ThisDigit;
271 
272         ThisChar++;
273         DigitCount++;
274         if (DigitCount > 16)
275         {
276             /* Value is too large (> 64 bits/8 bytes/16 hex digits) */
277 
278             return (AE_LIMIT);
279         }
280     }
281 
282     *ReturnInteger = ReturnValue;
283     return (AE_OK);
284 }
285 
286 
287 /******************************************************************************
288  *
289  * FUNCTION:    DtGetFileSize
290  *
291  * PARAMETERS:  Handle              - Open file handler
292  *
293  * RETURN:      Current file size
294  *
295  * DESCRIPTION: Get the current size of a file. Seek to the EOF and get the
296  *              offset. Seek back to the original location.
297  *
298  *****************************************************************************/
299 
300 UINT32
301 DtGetFileSize (
302     FILE                    *Handle)
303 {
304     int                     CurrentOffset;
305     int                     LastOffset;
306 
307 
308     CurrentOffset = ftell (Handle);
309     fseek (Handle, 0, SEEK_END);
310     LastOffset = ftell (Handle);
311     fseek (Handle, CurrentOffset, SEEK_SET);
312 
313     return ((UINT32) LastOffset);
314 }
315 
316 
317 /******************************************************************************
318  *
319  * FUNCTION:    DtGetFieldValue
320  *
321  * PARAMETERS:  Field               - Current field list pointer
322  *
323  * RETURN:      Field value
324  *
325  * DESCRIPTION: Get field value
326  *
327  *****************************************************************************/
328 
329 char *
330 DtGetFieldValue (
331     DT_FIELD                *Field)
332 {
333     if (!Field)
334     {
335         return (NULL);
336     }
337 
338     return (Field->Value);
339 }
340 
341 
342 /******************************************************************************
343  *
344  * FUNCTION:    DtGetFieldType
345  *
346  * PARAMETERS:  Info                - Data table info
347  *
348  * RETURN:      Field type
349  *
350  * DESCRIPTION: Get field type
351  *
352  *****************************************************************************/
353 
354 UINT8
355 DtGetFieldType (
356     ACPI_DMTABLE_INFO       *Info)
357 {
358     UINT8                   Type;
359 
360 
361     /* DT_FLAG means that this is the start of a block of flag bits */
362     /* TBD - we can make these a separate opcode later */
363 
364     if (Info->Flags & DT_FLAG)
365     {
366         return (DT_FIELD_TYPE_FLAGS_INTEGER);
367     }
368 
369     /* Type is based upon the opcode for this field in the info table */
370 
371     switch (Info->Opcode)
372     {
373     case ACPI_DMT_FLAG0:
374     case ACPI_DMT_FLAG1:
375     case ACPI_DMT_FLAG2:
376     case ACPI_DMT_FLAG3:
377     case ACPI_DMT_FLAG4:
378     case ACPI_DMT_FLAG5:
379     case ACPI_DMT_FLAG6:
380     case ACPI_DMT_FLAG7:
381     case ACPI_DMT_FLAGS0:
382     case ACPI_DMT_FLAGS1:
383     case ACPI_DMT_FLAGS2:
384     case ACPI_DMT_FLAGS4:
385 
386         Type = DT_FIELD_TYPE_FLAG;
387         break;
388 
389     case ACPI_DMT_NAME4:
390     case ACPI_DMT_SIG:
391     case ACPI_DMT_NAME6:
392     case ACPI_DMT_NAME8:
393     case ACPI_DMT_STRING:
394 
395         Type = DT_FIELD_TYPE_STRING;
396         break;
397 
398     case ACPI_DMT_BUFFER:
399     case ACPI_DMT_BUF7:
400     case ACPI_DMT_BUF16:
401     case ACPI_DMT_BUF128:
402     case ACPI_DMT_PCI_PATH:
403 
404         Type = DT_FIELD_TYPE_BUFFER;
405         break;
406 
407     case ACPI_DMT_GAS:
408     case ACPI_DMT_HESTNTFY:
409 
410         Type = DT_FIELD_TYPE_INLINE_SUBTABLE;
411         break;
412 
413     case ACPI_DMT_UNICODE:
414 
415         Type = DT_FIELD_TYPE_UNICODE;
416         break;
417 
418     case ACPI_DMT_UUID:
419 
420         Type = DT_FIELD_TYPE_UUID;
421         break;
422 
423     case ACPI_DMT_DEVICE_PATH:
424 
425         Type = DT_FIELD_TYPE_DEVICE_PATH;
426         break;
427 
428     case ACPI_DMT_LABEL:
429 
430         Type = DT_FIELD_TYPE_LABEL;
431         break;
432 
433     default:
434 
435         Type = DT_FIELD_TYPE_INTEGER;
436         break;
437     }
438 
439     return (Type);
440 }
441 
442 
443 /******************************************************************************
444  *
445  * FUNCTION:    DtGetBufferLength
446  *
447  * PARAMETERS:  Buffer              - List of integers,
448  *                                    for example "10 3A 4F 2E"
449  *
450  * RETURN:      Count of integer
451  *
452  * DESCRIPTION: Get length of bytes needed to store the integers
453  *
454  *****************************************************************************/
455 
456 UINT32
457 DtGetBufferLength (
458     char                    *Buffer)
459 {
460     UINT32                  ByteLength = 0;
461 
462 
463     while (*Buffer)
464     {
465         if (*Buffer == ' ')
466         {
467             ByteLength++;
468 
469             while (*Buffer == ' ')
470             {
471                 Buffer++;
472             }
473         }
474 
475         Buffer++;
476     }
477 
478     return (++ByteLength);
479 }
480 
481 
482 /******************************************************************************
483  *
484  * FUNCTION:    DtGetFieldLength
485  *
486  * PARAMETERS:  Field               - Current field
487  *              Info                - Data table info
488  *
489  * RETURN:      Field length
490  *
491  * DESCRIPTION: Get length of bytes needed to compile the field
492  *
493  * Note: This function must remain in sync with AcpiDmDumpTable.
494  *
495  *****************************************************************************/
496 
497 UINT32
498 DtGetFieldLength (
499     DT_FIELD                *Field,
500     ACPI_DMTABLE_INFO       *Info)
501 {
502     UINT32                  ByteLength = 0;
503     char                    *Value;
504 
505 
506     /* Length is based upon the opcode for this field in the info table */
507 
508     switch (Info->Opcode)
509     {
510     case ACPI_DMT_FLAG0:
511     case ACPI_DMT_FLAG1:
512     case ACPI_DMT_FLAG2:
513     case ACPI_DMT_FLAG3:
514     case ACPI_DMT_FLAG4:
515     case ACPI_DMT_FLAG5:
516     case ACPI_DMT_FLAG6:
517     case ACPI_DMT_FLAG7:
518     case ACPI_DMT_FLAGS0:
519     case ACPI_DMT_FLAGS1:
520     case ACPI_DMT_FLAGS2:
521     case ACPI_DMT_FLAGS4:
522     case ACPI_DMT_LABEL:
523     case ACPI_DMT_EXTRA_TEXT:
524 
525         ByteLength = 0;
526         break;
527 
528     case ACPI_DMT_UINT8:
529     case ACPI_DMT_CHKSUM:
530     case ACPI_DMT_SPACEID:
531     case ACPI_DMT_ACCWIDTH:
532     case ACPI_DMT_IVRS:
533     case ACPI_DMT_MADT:
534     case ACPI_DMT_PMTT:
535     case ACPI_DMT_SRAT:
536     case ACPI_DMT_ASF:
537     case ACPI_DMT_HESTNTYP:
538     case ACPI_DMT_FADTPM:
539     case ACPI_DMT_EINJACT:
540     case ACPI_DMT_EINJINST:
541     case ACPI_DMT_ERSTACT:
542     case ACPI_DMT_ERSTINST:
543 
544         ByteLength = 1;
545         break;
546 
547     case ACPI_DMT_UINT16:
548     case ACPI_DMT_DMAR:
549     case ACPI_DMT_HEST:
550     case ACPI_DMT_PCI_PATH:
551 
552         ByteLength = 2;
553         break;
554 
555     case ACPI_DMT_UINT24:
556 
557         ByteLength = 3;
558         break;
559 
560     case ACPI_DMT_UINT32:
561     case ACPI_DMT_NAME4:
562     case ACPI_DMT_SLIC:
563     case ACPI_DMT_SIG:
564 
565         ByteLength = 4;
566         break;
567 
568     case ACPI_DMT_UINT40:
569 
570         ByteLength = 5;
571         break;
572 
573     case ACPI_DMT_UINT48:
574     case ACPI_DMT_NAME6:
575 
576         ByteLength = 6;
577         break;
578 
579     case ACPI_DMT_UINT56:
580     case ACPI_DMT_BUF7:
581 
582         ByteLength = 7;
583         break;
584 
585     case ACPI_DMT_UINT64:
586     case ACPI_DMT_NAME8:
587 
588         ByteLength = 8;
589         break;
590 
591     case ACPI_DMT_STRING:
592 
593         Value = DtGetFieldValue (Field);
594         if (Value)
595         {
596             ByteLength = ACPI_STRLEN (Value) + 1;
597         }
598         else
599         {   /* At this point, this is a fatal error */
600 
601             sprintf (MsgBuffer, "Expected \"%s\"", Info->Name);
602             DtFatal (ASL_MSG_COMPILER_INTERNAL, NULL, MsgBuffer);
603             return (0);
604         }
605         break;
606 
607     case ACPI_DMT_GAS:
608 
609         ByteLength = sizeof (ACPI_GENERIC_ADDRESS);
610         break;
611 
612     case ACPI_DMT_HESTNTFY:
613 
614         ByteLength = sizeof (ACPI_HEST_NOTIFY);
615         break;
616 
617     case ACPI_DMT_BUFFER:
618 
619         Value = DtGetFieldValue (Field);
620         if (Value)
621         {
622             ByteLength = DtGetBufferLength (Value);
623         }
624         else
625         {   /* At this point, this is a fatal error */
626 
627             sprintf (MsgBuffer, "Expected \"%s\"", Info->Name);
628             DtFatal (ASL_MSG_COMPILER_INTERNAL, NULL, MsgBuffer);
629             return (0);
630         }
631         break;
632 
633     case ACPI_DMT_BUF16:
634     case ACPI_DMT_UUID:
635 
636         ByteLength = 16;
637         break;
638 
639     case ACPI_DMT_BUF128:
640 
641         ByteLength = 128;
642         break;
643 
644     case ACPI_DMT_UNICODE:
645 
646         Value = DtGetFieldValue (Field);
647 
648         /* TBD: error if Value is NULL? (as below?) */
649 
650         ByteLength = (ACPI_STRLEN (Value) + 1) * sizeof(UINT16);
651         break;
652 
653     default:
654 
655         DtFatal (ASL_MSG_COMPILER_INTERNAL, Field, "Invalid table opcode");
656         return (0);
657     }
658 
659     return (ByteLength);
660 }
661 
662 
663 /******************************************************************************
664  *
665  * FUNCTION:    DtSum
666  *
667  * PARAMETERS:  DT_WALK_CALLBACK:
668  *              Subtable            - Subtable
669  *              Context             - Unused
670  *              ReturnValue         - Store the checksum of subtable
671  *
672  * RETURN:      Status
673  *
674  * DESCRIPTION: Get the checksum of subtable
675  *
676  *****************************************************************************/
677 
678 static void
679 DtSum (
680     DT_SUBTABLE             *Subtable,
681     void                    *Context,
682     void                    *ReturnValue)
683 {
684     UINT8                   Checksum;
685     UINT8                   *Sum = ReturnValue;
686 
687 
688     Checksum = AcpiTbChecksum (Subtable->Buffer, Subtable->Length);
689     *Sum = (UINT8) (*Sum + Checksum);
690 }
691 
692 
693 /******************************************************************************
694  *
695  * FUNCTION:    DtSetTableChecksum
696  *
697  * PARAMETERS:  ChecksumPointer     - Where to return the checksum
698  *
699  * RETURN:      None
700  *
701  * DESCRIPTION: Set checksum of the whole data table into the checksum field
702  *
703  *****************************************************************************/
704 
705 void
706 DtSetTableChecksum (
707     UINT8                   *ChecksumPointer)
708 {
709     UINT8                   Checksum = 0;
710     UINT8                   OldSum;
711 
712 
713     DtWalkTableTree (Gbl_RootTable, DtSum, NULL, &Checksum);
714 
715     OldSum = *ChecksumPointer;
716     Checksum = (UINT8) (Checksum - OldSum);
717 
718     /* Compute the final checksum */
719 
720     Checksum = (UINT8) (0 - Checksum);
721     *ChecksumPointer = Checksum;
722 }
723 
724 
725 /******************************************************************************
726  *
727  * FUNCTION:    DtSetTableLength
728  *
729  * PARAMETERS:  None
730  *
731  * RETURN:      None
732  *
733  * DESCRIPTION: Walk the subtables and set all the length fields
734  *
735  *****************************************************************************/
736 
737 void
738 DtSetTableLength (
739     void)
740 {
741     DT_SUBTABLE             *ParentTable;
742     DT_SUBTABLE             *ChildTable;
743 
744 
745     ParentTable = Gbl_RootTable;
746     ChildTable = NULL;
747 
748     if (!ParentTable)
749     {
750         return;
751     }
752 
753     DtSetSubtableLength (ParentTable);
754 
755     while (1)
756     {
757         ChildTable = DtGetNextSubtable (ParentTable, ChildTable);
758         if (ChildTable)
759         {
760             if (ChildTable->LengthField)
761             {
762                 DtSetSubtableLength (ChildTable);
763             }
764 
765             if (ChildTable->Child)
766             {
767                 ParentTable = ChildTable;
768                 ChildTable = NULL;
769             }
770             else
771             {
772                 ParentTable->TotalLength += ChildTable->TotalLength;
773                 if (ParentTable->LengthField)
774                 {
775                     DtSetSubtableLength (ParentTable);
776                 }
777             }
778         }
779         else
780         {
781             ChildTable = ParentTable;
782 
783             if (ChildTable == Gbl_RootTable)
784             {
785                 break;
786             }
787 
788             ParentTable = DtGetParentSubtable (ParentTable);
789 
790             ParentTable->TotalLength += ChildTable->TotalLength;
791             if (ParentTable->LengthField)
792             {
793                 DtSetSubtableLength (ParentTable);
794             }
795         }
796     }
797 }
798 
799 
800 /******************************************************************************
801  *
802  * FUNCTION:    DtWalkTableTree
803  *
804  * PARAMETERS:  StartTable          - Subtable in the tree where walking begins
805  *              UserFunction        - Called during the walk
806  *              Context             - Passed to user function
807  *              ReturnValue         - The return value of UserFunction
808  *
809  * RETURN:      None
810  *
811  * DESCRIPTION: Performs a depth-first walk of the subtable tree
812  *
813  *****************************************************************************/
814 
815 void
816 DtWalkTableTree (
817     DT_SUBTABLE             *StartTable,
818     DT_WALK_CALLBACK        UserFunction,
819     void                    *Context,
820     void                    *ReturnValue)
821 {
822     DT_SUBTABLE             *ParentTable;
823     DT_SUBTABLE             *ChildTable;
824 
825 
826     ParentTable = StartTable;
827     ChildTable = NULL;
828 
829     if (!ParentTable)
830     {
831         return;
832     }
833 
834     UserFunction (ParentTable, Context, ReturnValue);
835 
836     while (1)
837     {
838         ChildTable = DtGetNextSubtable (ParentTable, ChildTable);
839         if (ChildTable)
840         {
841             UserFunction (ChildTable, Context, ReturnValue);
842 
843             if (ChildTable->Child)
844             {
845                 ParentTable = ChildTable;
846                 ChildTable = NULL;
847             }
848         }
849         else
850         {
851             ChildTable = ParentTable;
852             if (ChildTable == Gbl_RootTable)
853             {
854                 break;
855             }
856 
857             ParentTable = DtGetParentSubtable (ParentTable);
858 
859             if (ChildTable->Peer == StartTable)
860             {
861                 break;
862             }
863         }
864     }
865 }
866 
867 
868 /******************************************************************************
869  *
870  * FUNCTION:    DtFreeFieldList
871  *
872  * PARAMETERS:  None
873  *
874  * RETURN:      None
875  *
876  * DESCRIPTION: Free the field list
877  *
878  *****************************************************************************/
879 
880 void
881 DtFreeFieldList (
882     void)
883 {
884     DT_FIELD                *Field = Gbl_FieldList;
885     DT_FIELD                *NextField;
886 
887 
888     /* Walk and free entire field list */
889 
890     while (Field)
891     {
892         NextField = Field->Next; /* Save link */
893 
894         if (!(Field->Flags & DT_FIELD_NOT_ALLOCATED))
895         {
896             ACPI_FREE (Field->Name);
897             ACPI_FREE (Field->Value);
898         }
899 
900         ACPI_FREE (Field);
901         Field = NextField;
902     }
903 }
904