1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affects only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AACRAID_DEBUG opt_aacraid.h 35AHC_ALLOW_MEMIO opt_aic7xxx.h 36AHC_TMODE_ENABLE opt_aic7xxx.h 37AHC_DUMP_EEPROM opt_aic7xxx.h 38AHC_DEBUG opt_aic7xxx.h 39AHC_DEBUG_OPTS opt_aic7xxx.h 40AHC_REG_PRETTY_PRINT opt_aic7xxx.h 41AHD_DEBUG opt_aic79xx.h 42AHD_DEBUG_OPTS opt_aic79xx.h 43AHD_TMODE_ENABLE opt_aic79xx.h 44AHD_REG_PRETTY_PRINT opt_aic79xx.h 45ADW_ALLOW_MEMIO opt_adw.h 46 47TWA_DEBUG opt_twa.h 48TWA_FLASH_FIRMWARE opt_twa.h 49 50# Debugging options. 51ALT_BREAK_TO_DEBUGGER opt_kdb.h 52BREAK_TO_DEBUGGER opt_kdb.h 53DDB 54DDB_BUFR_SIZE opt_ddb.h 55DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 56DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 57DDB_CTF opt_ddb.h 58DDB_NUMSYM opt_ddb.h 59GDB 60KDB opt_global.h 61KDB_TRACE opt_kdb.h 62KDB_UNATTENDED opt_kdb.h 63KLD_DEBUG opt_kld.h 64SYSCTL_DEBUG opt_sysctl.h 65TEXTDUMP_PREFERRED opt_ddb.h 66TEXTDUMP_VERBOSE opt_ddb.h 67 68# Miscellaneous options. 69ADAPTIVE_LOCKMGRS 70ALQ 71AUDIT opt_global.h 72BOOTHOWTO opt_global.h 73BOOTVERBOSE opt_global.h 74CALLOUT_PROFILING 75CAPABILITIES opt_capsicum.h 76CAPABILITY_MODE opt_capsicum.h 77COMPAT_43 opt_compat.h 78COMPAT_43TTY opt_compat.h 79COMPAT_FREEBSD4 opt_compat.h 80COMPAT_FREEBSD5 opt_compat.h 81COMPAT_FREEBSD6 opt_compat.h 82COMPAT_FREEBSD7 opt_compat.h 83COMPILING_LINT opt_global.h 84COMPRESS_USER_CORES opt_core.h 85CY_PCI_FASTINTR 86DEADLKRES opt_watchdog.h 87DIRECTIO 88FILEMON opt_dontuse.h 89FFCLOCK 90FULL_PREEMPTION opt_sched.h 91IPI_PREEMPTION opt_sched.h 92GEOM_AES opt_geom.h 93GEOM_BDE opt_geom.h 94GEOM_BSD opt_geom.h 95GEOM_CACHE opt_geom.h 96GEOM_CONCAT opt_geom.h 97GEOM_ELI opt_geom.h 98GEOM_FOX opt_geom.h 99GEOM_GATE opt_geom.h 100GEOM_JOURNAL opt_geom.h 101GEOM_LABEL opt_geom.h 102GEOM_LINUX_LVM opt_geom.h 103GEOM_MBR opt_geom.h 104GEOM_MIRROR opt_geom.h 105GEOM_MULTIPATH opt_geom.h 106GEOM_NOP opt_geom.h 107GEOM_PART_APM opt_geom.h 108GEOM_PART_BSD opt_geom.h 109GEOM_PART_EBR opt_geom.h 110GEOM_PART_EBR_COMPAT opt_geom.h 111GEOM_PART_GPT opt_geom.h 112GEOM_PART_LDM opt_geom.h 113GEOM_PART_MBR opt_geom.h 114GEOM_PART_PC98 opt_geom.h 115GEOM_PART_VTOC8 opt_geom.h 116GEOM_PC98 opt_geom.h 117GEOM_RAID opt_geom.h 118GEOM_RAID3 opt_geom.h 119GEOM_SHSEC opt_geom.h 120GEOM_STRIPE opt_geom.h 121GEOM_SUNLABEL opt_geom.h 122GEOM_UNCOMPRESS opt_geom.h 123GEOM_UZIP opt_geom.h 124GEOM_VIRSTOR opt_geom.h 125GEOM_VOL opt_geom.h 126GEOM_ZERO opt_geom.h 127KDTRACE_HOOKS opt_kdtrace.h 128KSTACK_MAX_PAGES 129KSTACK_PAGES 130KTRACE 131KTRACE_REQUEST_POOL opt_ktrace.h 132LIBICONV 133MAC opt_global.h 134MAC_BIBA opt_dontuse.h 135MAC_BSDEXTENDED opt_dontuse.h 136MAC_IFOFF opt_dontuse.h 137MAC_LOMAC opt_dontuse.h 138MAC_MLS opt_dontuse.h 139MAC_NONE opt_dontuse.h 140MAC_PARTITION opt_dontuse.h 141MAC_PORTACL opt_dontuse.h 142MAC_SEEOTHERUIDS opt_dontuse.h 143MAC_STATIC opt_mac.h 144MAC_STUB opt_dontuse.h 145MAC_TEST opt_dontuse.h 146MD_ROOT opt_md.h 147MD_ROOT_FSTYPE opt_md.h 148MD_ROOT_SIZE opt_md.h 149MFI_DEBUG opt_mfi.h 150MFI_DECODE_LOG opt_mfi.h 151MPROF_BUFFERS opt_mprof.h 152MPROF_HASH_SIZE opt_mprof.h 153NEW_PCIB opt_global.h 154NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 155NO_ADAPTIVE_RWLOCKS 156NO_ADAPTIVE_SX 157NO_SYSCTL_DESCR opt_global.h 158NSWBUF_MIN opt_swap.h 159MBUF_PACKET_ZONE_DISABLE opt_global.h 160PANIC_REBOOT_WAIT_TIME opt_panic.h 161PPC_DEBUG opt_ppc.h 162PPC_PROBE_CHIPSET opt_ppc.h 163PPS_SYNC opt_ntp.h 164PREEMPTION opt_sched.h 165PROCDESC opt_procdesc.h 166QUOTA 167SCHED_4BSD opt_sched.h 168SCHED_STATS opt_sched.h 169SCHED_ULE opt_sched.h 170SLEEPQUEUE_PROFILING 171SLHCI_DEBUG opt_slhci.h 172SPX_HACK 173STACK opt_stack.h 174SUIDDIR 175MSGMNB opt_sysvipc.h 176MSGMNI opt_sysvipc.h 177MSGSEG opt_sysvipc.h 178MSGSSZ opt_sysvipc.h 179MSGTQL opt_sysvipc.h 180SEMMNI opt_sysvipc.h 181SEMMNS opt_sysvipc.h 182SEMMNU opt_sysvipc.h 183SEMMSL opt_sysvipc.h 184SEMOPM opt_sysvipc.h 185SEMUME opt_sysvipc.h 186SHMALL opt_sysvipc.h 187SHMMAX opt_sysvipc.h 188SHMMAXPGS opt_sysvipc.h 189SHMMIN opt_sysvipc.h 190SHMMNI opt_sysvipc.h 191SHMSEG opt_sysvipc.h 192SYSVMSG opt_sysvipc.h 193SYSVSEM opt_sysvipc.h 194SYSVSHM opt_sysvipc.h 195SW_WATCHDOG opt_watchdog.h 196TURNSTILE_PROFILING 197UMTX_PROFILING 198VFS_AIO 199VERBOSE_SYSINIT opt_global.h 200WLCACHE opt_wavelan.h 201WLDEBUG opt_wavelan.h 202 203# POSIX kernel options 204P1003_1B_MQUEUE opt_posix.h 205P1003_1B_SEMAPHORES opt_posix.h 206_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 207 208# Do we want the config file compiled into the kernel? 209INCLUDE_CONFIG_FILE opt_config.h 210 211# Options for static filesystems. These should only be used at config 212# time, since the corresponding lkms cannot work if there are any static 213# dependencies. Unusability is enforced by hiding the defines for the 214# options in a never-included header. 215CD9660 opt_dontuse.h 216EXT2FS opt_dontuse.h 217FDESCFS opt_dontuse.h 218FFS opt_dontuse.h 219FUSE opt_dontuse.h 220MSDOSFS opt_dontuse.h 221NANDFS opt_dontuse.h 222NULLFS opt_dontuse.h 223PROCFS opt_dontuse.h 224PSEUDOFS opt_dontuse.h 225REISERFS opt_dontuse.h 226SMBFS opt_dontuse.h 227TMPFS opt_dontuse.h 228UDF opt_dontuse.h 229UNIONFS opt_dontuse.h 230ZFS opt_dontuse.h 231 232# Pseudofs debugging 233PSEUDOFS_TRACE opt_pseudofs.h 234 235# In-kernel GSS-API 236KGSSAPI opt_kgssapi.h 237KGSSAPI_DEBUG opt_kgssapi.h 238 239# These static filesystems have one slightly bogus static dependency in 240# sys/i386/i386/autoconf.c. If any of these filesystems are 241# statically compiled into the kernel, code for mounting them as root 242# filesystems will be enabled - but look below. 243NFSCLIENT opt_nfs.h 244NFSSERVER opt_nfs.h 245 246# Use these options to compile the experimental nfs client and/or 247# server that supports NFSv4 into a kernel. 248# NFSCL - client 249# NFSD - server 250NFSCL opt_nfs.h 251NFSD opt_nfs.h 252 253# filesystems and libiconv bridge 254CD9660_ICONV opt_dontuse.h 255MSDOSFS_ICONV opt_dontuse.h 256UDF_ICONV opt_dontuse.h 257 258# If you are following the conditions in the copyright, 259# you can enable soft-updates which will speed up a lot of thigs 260# and make the system safer from crashes at the same time. 261# otherwise a STUB module will be compiled in. 262SOFTUPDATES opt_ffs.h 263 264# On small, embedded systems, it can be useful to turn off support for 265# snapshots. It saves about 30-40k for a feature that would be lightly 266# used, if it is used at all. 267NO_FFS_SNAPSHOT opt_ffs.h 268 269# Enabling this option turns on support for Access Control Lists in UFS, 270# which can be used to support high security configurations. Depends on 271# UFS_EXTATTR. 272UFS_ACL opt_ufs.h 273 274# Enabling this option turns on support for extended attributes in UFS-based 275# filesystems, which can be used to support high security configurations 276# as well as new filesystem features. 277UFS_EXTATTR opt_ufs.h 278UFS_EXTATTR_AUTOSTART opt_ufs.h 279 280# Enable fast hash lookups for large directories on UFS-based filesystems. 281UFS_DIRHASH opt_ufs.h 282 283# Enable gjournal-based UFS journal. 284UFS_GJOURNAL opt_ufs.h 285 286# The below sentence is not in English, and neither is this one. 287# We plan to remove the static dependences above, with a 288# <filesystem>_ROOT option to control if it usable as root. This list 289# allows these options to be present in config files already (though 290# they won't make any difference yet). 291NFS_ROOT opt_nfsroot.h 292 293# SMB/CIFS requester 294NETSMB opt_netsmb.h 295 296# Options used only in subr_param.c. 297HZ opt_param.h 298MAXFILES opt_param.h 299NBUF opt_param.h 300NSFBUFS opt_param.h 301VM_BCACHE_SIZE_MAX opt_param.h 302VM_SWZONE_SIZE_MAX opt_param.h 303MAXUSERS 304DFLDSIZ opt_param.h 305MAXDSIZ opt_param.h 306MAXSSIZ opt_param.h 307 308# Generic SCSI options. 309CAM_MAX_HIGHPOWER opt_cam.h 310CAMDEBUG opt_cam.h 311CAM_DEBUG_COMPILE opt_cam.h 312CAM_DEBUG_DELAY opt_cam.h 313CAM_DEBUG_BUS opt_cam.h 314CAM_DEBUG_TARGET opt_cam.h 315CAM_DEBUG_LUN opt_cam.h 316CAM_DEBUG_FLAGS opt_cam.h 317CAM_BOOT_DELAY opt_cam.h 318SCSI_DELAY opt_scsi.h 319SCSI_NO_SENSE_STRINGS opt_scsi.h 320SCSI_NO_OP_STRINGS opt_scsi.h 321 322# Options used only in cam/ata/ata_da.c 323ADA_TEST_FAILURE opt_ada.h 324ATA_STATIC_ID opt_ada.h 325 326# Options used only in cam/scsi/scsi_cd.c 327CHANGER_MIN_BUSY_SECONDS opt_cd.h 328CHANGER_MAX_BUSY_SECONDS opt_cd.h 329 330# Options used only in cam/scsi/scsi_sa.c. 331SA_IO_TIMEOUT opt_sa.h 332SA_SPACE_TIMEOUT opt_sa.h 333SA_REWIND_TIMEOUT opt_sa.h 334SA_ERASE_TIMEOUT opt_sa.h 335SA_1FM_AT_EOD opt_sa.h 336 337# Options used only in cam/scsi/scsi_pt.c 338SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 339 340# Options used only in cam/scsi/scsi_ses.c 341SES_ENABLE_PASSTHROUGH opt_ses.h 342 343# Options used in dev/sym/ (Symbios SCSI driver). 344SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 345 # Allows the ncr to take precedence 346 # 1 (1<<0) -> 810a, 860 347 # 2 (1<<1) -> 825a, 875, 885, 895 348 # 4 (1<<2) -> 895a, 896, 1510d 349SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 350 # disabled:0 (default), enabled:1 351SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 352 # disabled:0, enabled:1 (default) 353SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 354 # default:8, range:[1..64] 355 356# Options used only in pci/ncr.c 357SCSI_NCR_DEBUG opt_ncr.h 358SCSI_NCR_MAX_SYNC opt_ncr.h 359SCSI_NCR_MAX_WIDE opt_ncr.h 360SCSI_NCR_MYADDR opt_ncr.h 361 362# Options used only in dev/isp/* 363ISP_TARGET_MODE opt_isp.h 364ISP_FW_CRASH_DUMP opt_isp.h 365ISP_DEFAULT_ROLES opt_isp.h 366ISP_INTERNAL_TARGET opt_isp.h 367 368# Options used only in dev/iscsi 369ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 370 371# Net stuff. 372ACCEPT_FILTER_DATA 373ACCEPT_FILTER_DNS 374ACCEPT_FILTER_HTTP 375ALTQ opt_global.h 376ALTQ_CBQ opt_altq.h 377ALTQ_CDNR opt_altq.h 378ALTQ_DEBUG opt_altq.h 379ALTQ_HFSC opt_altq.h 380ALTQ_NOPCC opt_altq.h 381ALTQ_PRIQ opt_altq.h 382ALTQ_RED opt_altq.h 383ALTQ_RIO opt_altq.h 384BOOTP opt_bootp.h 385BOOTP_BLOCKSIZE opt_bootp.h 386BOOTP_COMPAT opt_bootp.h 387BOOTP_NFSROOT opt_bootp.h 388BOOTP_NFSV3 opt_bootp.h 389BOOTP_WIRED_TO opt_bootp.h 390DEVICE_POLLING 391DEV_ENC opt_enc.h 392DEV_PF opt_pf.h 393DEV_PFLOG opt_pf.h 394DEV_PFSYNC opt_pf.h 395DEV_VLAN opt_vlan.h 396DUMMYNET opt_ipdn.h 397ETHER_8022 opt_ef.h 398ETHER_8023 opt_ef.h 399ETHER_II opt_ef.h 400ETHER_SNAP opt_ef.h 401INET opt_inet.h 402INET6 opt_inet6.h 403IPDIVERT 404IPFILTER opt_ipfilter.h 405IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 406IPFILTER_LOG opt_ipfilter.h 407IPFILTER_LOOKUP opt_ipfilter.h 408IPFIREWALL opt_ipfw.h 409IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 410IPFIREWALL_NAT opt_ipfw.h 411IPFIREWALL_VERBOSE opt_ipfw.h 412IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 413IPSEC opt_ipsec.h 414IPSEC_DEBUG opt_ipsec.h 415IPSEC_FILTERTUNNEL opt_ipsec.h 416IPSEC_NAT_T opt_ipsec.h 417IPSTEALTH 418IPX 419KRPC 420LIBALIAS 421LIBMBPOOL 422LIBMCHAIN 423MBUF_PROFILING 424MBUF_STRESS_TEST 425MROUTING opt_mrouting.h 426NETATALK opt_atalk.h 427NFSLOCKD 428PCBGROUP opt_pcbgroup.h 429PF_DEFAULT_TO_DROP opt_pf.h 430RADIX_MPATH opt_mpath.h 431ROUTETABLES opt_route.h 432SLIP_IFF_OPTS opt_slip.h 433TCPDEBUG 434TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading 435TCP_SIGNATURE opt_inet.h 436VLAN_ARRAY opt_vlan.h 437XBONEHACK 438FLOWTABLE opt_route.h 439 440# 441# SCTP 442# 443SCTP opt_sctp.h 444SCTP_DEBUG opt_sctp.h # Enable debug printfs 445SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril 446SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 447SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 448SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 449SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 450SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 451SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 452SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 453SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 454# 455# 456# 457 458# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 459# Each netgraph node type can be either be compiled into the kernel 460# or loaded dynamically. To get the former, include the corresponding 461# option below. Each type has its own man page, e.g. ng_async(4). 462NETGRAPH 463NETGRAPH_DEBUG opt_netgraph.h 464NETGRAPH_ASYNC opt_netgraph.h 465NETGRAPH_ATMLLC opt_netgraph.h 466NETGRAPH_ATM_ATMPIF opt_netgraph.h 467NETGRAPH_BLUETOOTH opt_netgraph.h 468NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 469NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 470NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 471NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 472NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 473NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 474NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 475NETGRAPH_BPF opt_netgraph.h 476NETGRAPH_BRIDGE opt_netgraph.h 477NETGRAPH_CAR opt_netgraph.h 478NETGRAPH_CISCO opt_netgraph.h 479NETGRAPH_DEFLATE opt_netgraph.h 480NETGRAPH_DEVICE opt_netgraph.h 481NETGRAPH_ECHO opt_netgraph.h 482NETGRAPH_EIFACE opt_netgraph.h 483NETGRAPH_ETHER opt_netgraph.h 484NETGRAPH_ETHER_ECHO opt_netgraph.h 485NETGRAPH_FEC opt_netgraph.h 486NETGRAPH_FRAME_RELAY opt_netgraph.h 487NETGRAPH_GIF opt_netgraph.h 488NETGRAPH_GIF_DEMUX opt_netgraph.h 489NETGRAPH_HOLE opt_netgraph.h 490NETGRAPH_IFACE opt_netgraph.h 491NETGRAPH_IP_INPUT opt_netgraph.h 492NETGRAPH_IPFW opt_netgraph.h 493NETGRAPH_KSOCKET opt_netgraph.h 494NETGRAPH_L2TP opt_netgraph.h 495NETGRAPH_LMI opt_netgraph.h 496# MPPC compression requires proprietary files (not included) 497NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 498NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 499NETGRAPH_NAT opt_netgraph.h 500NETGRAPH_NETFLOW opt_netgraph.h 501NETGRAPH_ONE2MANY opt_netgraph.h 502NETGRAPH_PATCH opt_netgraph.h 503NETGRAPH_PIPE opt_netgraph.h 504NETGRAPH_PPP opt_netgraph.h 505NETGRAPH_PPPOE opt_netgraph.h 506NETGRAPH_PPTPGRE opt_netgraph.h 507NETGRAPH_PRED1 opt_netgraph.h 508NETGRAPH_RFC1490 opt_netgraph.h 509NETGRAPH_SOCKET opt_netgraph.h 510NETGRAPH_SPLIT opt_netgraph.h 511NETGRAPH_SPPP opt_netgraph.h 512NETGRAPH_TAG opt_netgraph.h 513NETGRAPH_TCPMSS opt_netgraph.h 514NETGRAPH_TEE opt_netgraph.h 515NETGRAPH_TTY opt_netgraph.h 516NETGRAPH_UI opt_netgraph.h 517NETGRAPH_VJC opt_netgraph.h 518NETGRAPH_VLAN opt_netgraph.h 519 520# NgATM options 521NGATM_ATM opt_netgraph.h 522NGATM_ATMBASE opt_netgraph.h 523NGATM_SSCOP opt_netgraph.h 524NGATM_SSCFU opt_netgraph.h 525NGATM_UNI opt_netgraph.h 526NGATM_CCATM opt_netgraph.h 527 528# DRM options 529DRM_DEBUG opt_drm.h 530 531TI_SF_BUF_JUMBO opt_ti.h 532TI_JUMBO_HDRSPLIT opt_ti.h 533 534# XXX Conflict: # of devices vs network protocol (Native ATM). 535# This makes "atm.h" unusable. 536NATM 537 538# DPT driver debug flags 539DPT_MEASURE_PERFORMANCE opt_dpt.h 540DPT_RESET_HBA opt_dpt.h 541 542# Misc debug flags. Most of these should probably be replaced with 543# 'DEBUG', and then let people recompile just the interesting modules 544# with 'make CC="cc -DDEBUG"'. 545CLUSTERDEBUG opt_debug_cluster.h 546DEBUG_1284 opt_ppb_1284.h 547VP0_DEBUG opt_vpo.h 548LPT_DEBUG opt_lpt.h 549PLIP_DEBUG opt_plip.h 550LOCKF_DEBUG opt_debug_lockf.h 551NETATALKDEBUG opt_atalk.h 552SI_DEBUG opt_debug_si.h 553 554# Fb options 555FB_DEBUG opt_fb.h 556FB_INSTALL_CDEV opt_fb.h 557 558# ppbus related options 559PERIPH_1284 opt_ppb_1284.h 560DONTPROBE_1284 opt_ppb_1284.h 561 562# smbus related options 563ENABLE_ALART opt_intpm.h 564 565# These cause changes all over the kernel 566BLKDEV_IOSIZE opt_global.h 567BURN_BRIDGES opt_global.h 568DEBUG opt_global.h 569DEBUG_LOCKS opt_global.h 570DEBUG_VFS_LOCKS opt_global.h 571DFLTPHYS opt_global.h 572DIAGNOSTIC opt_global.h 573INVARIANT_SUPPORT opt_global.h 574INVARIANTS opt_global.h 575MAXCPU opt_global.h 576MAXMEMDOM opt_global.h 577MAXPHYS opt_global.h 578MCLSHIFT opt_global.h 579MUTEX_DEBUG opt_global.h 580MUTEX_NOINLINE opt_global.h 581LOCK_PROFILING opt_global.h 582LOCK_PROFILING_FAST opt_global.h 583MSIZE opt_global.h 584REGRESSION opt_global.h 585RWLOCK_NOINLINE opt_global.h 586SX_NOINLINE opt_global.h 587VFS_BIO_DEBUG opt_global.h 588 589# These are VM related options 590VM_KMEM_SIZE opt_vm.h 591VM_KMEM_SIZE_SCALE opt_vm.h 592VM_KMEM_SIZE_MAX opt_vm.h 593VM_NRESERVLEVEL opt_vm.h 594VM_LEVEL_0_ORDER opt_vm.h 595NO_SWAPPING opt_vm.h 596MALLOC_MAKE_FAILURES opt_vm.h 597MALLOC_PROFILE opt_vm.h 598MALLOC_DEBUG_MAXZONES opt_vm.h 599 600# The MemGuard replacement allocator used for tamper-after-free detection 601DEBUG_MEMGUARD opt_vm.h 602 603# The RedZone malloc(9) protection 604DEBUG_REDZONE opt_vm.h 605 606# Standard SMP options 607SMP opt_global.h 608 609# Size of the kernel message buffer 610MSGBUF_SIZE opt_msgbuf.h 611 612# NFS options 613NFS_MINATTRTIMO opt_nfs.h 614NFS_MAXATTRTIMO opt_nfs.h 615NFS_MINDIRATTRTIMO opt_nfs.h 616NFS_MAXDIRATTRTIMO opt_nfs.h 617NFS_GATHERDELAY opt_nfs.h 618NFS_WDELAYHASHSIZ opt_nfs.h 619NFS_DEBUG opt_nfs.h 620 621# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 622OVERRIDE_CARD opt_bktr.h 623OVERRIDE_TUNER opt_bktr.h 624OVERRIDE_DBX opt_bktr.h 625OVERRIDE_MSP opt_bktr.h 626BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 627BROOKTREE_ALLOC_PAGES opt_bktr.h 628BKTR_OVERRIDE_CARD opt_bktr.h 629BKTR_OVERRIDE_TUNER opt_bktr.h 630BKTR_OVERRIDE_DBX opt_bktr.h 631BKTR_OVERRIDE_MSP opt_bktr.h 632BKTR_SYSTEM_DEFAULT opt_bktr.h 633BKTR_ALLOC_PAGES opt_bktr.h 634BKTR_USE_PLL opt_bktr.h 635BKTR_GPIO_ACCESS opt_bktr.h 636BKTR_NO_MSP_RESET opt_bktr.h 637BKTR_430_FX_MODE opt_bktr.h 638BKTR_SIS_VIA_MODE opt_bktr.h 639BKTR_USE_FREEBSD_SMBUS opt_bktr.h 640BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 641 642# Options for uart(4) 643UART_PPS_ON_CTS opt_uart.h 644UART_POLL_FREQ opt_uart.h 645 646# options for bus/device framework 647BUS_DEBUG opt_bus.h 648 649# options for USB support 650USB_DEBUG opt_usb.h 651USB_HOST_ALIGN opt_usb.h 652USB_REQ_DEBUG opt_usb.h 653USB_TEMPLATE opt_usb.h 654USB_VERBOSE opt_usb.h 655USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 656U3G_DEBUG opt_u3g.h 657UKBD_DFLT_KEYMAP opt_ukbd.h 658UPLCOM_INTR_INTERVAL opt_uplcom.h 659UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 660UVSCOM_INTR_INTERVAL opt_uvscom.h 661 662# Embedded system options 663INIT_PATH 664 665ROOTDEVNAME 666 667FDC_DEBUG opt_fdc.h 668PCFCLOCK_VERBOSE opt_pcfclock.h 669PCFCLOCK_MAX_RETRIES opt_pcfclock.h 670 671KTR opt_global.h 672KTR_ALQ opt_ktr.h 673KTR_MASK opt_ktr.h 674KTR_CPUMASK opt_ktr.h 675KTR_COMPILE opt_global.h 676KTR_BOOT_ENTRIES opt_global.h 677KTR_ENTRIES opt_global.h 678KTR_VERBOSE opt_ktr.h 679WITNESS opt_global.h 680WITNESS_KDB opt_witness.h 681WITNESS_NO_VNODE opt_witness.h 682WITNESS_SKIPSPIN opt_witness.h 683OPENSOLARIS_WITNESS opt_global.h 684 685# options for ACPI support 686ACPI_DEBUG opt_acpi.h 687ACPI_MAX_TASKS opt_acpi.h 688ACPI_MAX_THREADS opt_acpi.h 689 690# ISA support 691DEV_ISA opt_isa.h 692ISAPNP opt_isa.h 693 694# various 'device presence' options. 695DEV_BPF opt_bpf.h 696DEV_NETMAP opt_global.h 697DEV_MCA opt_mca.h 698DEV_CARP opt_carp.h 699DEV_SPLASH opt_splash.h 700 701# EISA support 702DEV_EISA opt_eisa.h 703EISA_SLOTS opt_eisa.h 704 705# ed driver 706ED_HPP opt_ed.h 707ED_3C503 opt_ed.h 708ED_SIC opt_ed.h 709 710# bce driver 711BCE_DEBUG opt_bce.h 712BCE_NVRAM_WRITE_SUPPORT opt_bce.h 713 714SOCKBUF_DEBUG opt_global.h 715 716 717# options for ubsec driver 718UBSEC_DEBUG opt_ubsec.h 719UBSEC_RNDTEST opt_ubsec.h 720UBSEC_NO_RNG opt_ubsec.h 721 722# options for hifn driver 723HIFN_DEBUG opt_hifn.h 724HIFN_RNDTEST opt_hifn.h 725 726# options for safenet driver 727SAFE_DEBUG opt_safe.h 728SAFE_NO_RNG opt_safe.h 729SAFE_RNDTEST opt_safe.h 730 731# syscons options 732MAXCONS opt_syscons.h 733SC_ALT_MOUSE_IMAGE opt_syscons.h 734SC_CUT_SPACES2TABS opt_syscons.h 735SC_CUT_SEPCHARS opt_syscons.h 736SC_DEBUG_LEVEL opt_syscons.h 737SC_DFLT_FONT opt_syscons.h 738SC_DISABLE_KDBKEY opt_syscons.h 739SC_DISABLE_REBOOT opt_syscons.h 740SC_HISTORY_SIZE opt_syscons.h 741SC_KERNEL_CONS_ATTR opt_syscons.h 742SC_KERNEL_CONS_REV_ATTR opt_syscons.h 743SC_MOUSE_CHAR opt_syscons.h 744SC_NO_CUTPASTE opt_syscons.h 745SC_NO_FONT_LOADING opt_syscons.h 746SC_NO_HISTORY opt_syscons.h 747SC_NO_MODE_CHANGE opt_syscons.h 748SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 749SC_NO_SYSMOUSE opt_syscons.h 750SC_NORM_ATTR opt_syscons.h 751SC_NORM_REV_ATTR opt_syscons.h 752SC_PIXEL_MODE opt_syscons.h 753SC_RENDER_DEBUG opt_syscons.h 754SC_TWOBUTTON_MOUSE opt_syscons.h 755 756# teken terminal emulator options 757TEKEN_CONS25 opt_teken.h 758TEKEN_UTF8 opt_teken.h 759 760# options for printf 761PRINTF_BUFR_SIZE opt_printf.h 762 763# kbd options 764KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 765KBD_INSTALL_CDEV opt_kbd.h 766KBD_MAXRETRY opt_kbd.h 767KBD_MAXWAIT opt_kbd.h 768KBD_RESETDELAY opt_kbd.h 769KBDIO_DEBUG opt_kbd.h 770 771# options for the Atheros driver 772ATH_DEBUG opt_ath.h 773ATH_TXBUF opt_ath.h 774ATH_RXBUF opt_ath.h 775ATH_DIAGAPI opt_ath.h 776ATH_TX99_DIAG opt_ath.h 777ATH_ENABLE_11N opt_ath.h 778ATH_ENABLE_DFS opt_ath.h 779ATH_EEPROM_FIRMWARE opt_ath.h 780ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 781ATH_DEBUG_ALQ opt_ath.h 782ATH_KTR_INTR_DEBUG opt_ath.h 783 784# options for the Atheros hal 785AH_SUPPORT_AR5416 opt_ah.h 786# XXX For now, this breaks non-AR9130 chipsets, so only use it 787# XXX when actually targetting AR9130. 788AH_SUPPORT_AR9130 opt_ah.h 789 790# This is required for AR933x SoC support 791AH_SUPPORT_AR9330 opt_ah.h 792AH_SUPPORT_AR9340 opt_ah.h 793 794AH_DEBUG opt_ah.h 795AH_ASSERT opt_ah.h 796AH_DEBUG_ALQ opt_ah.h 797AH_REGOPS_FUNC opt_ah.h 798AH_WRITE_REGDOMAIN opt_ah.h 799AH_DEBUG_COUNTRY opt_ah.h 800AH_WRITE_EEPROM opt_ah.h 801AH_PRIVATE_DIAG opt_ah.h 802AH_NEED_DESC_SWAP opt_ah.h 803AH_USE_INIPDGAIN opt_ah.h 804AH_MAXCHAN opt_ah.h 805AH_RXCFG_SDMAMW_4BYTES opt_ah.h 806AH_INTERRUPT_DEBUGGING opt_ah.h 807# AR5416 and later interrupt mitigation 808# XXX do not use this for AR9130 809AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 810 811# options for the Broadcom BCM43xx driver (bwi) 812BWI_DEBUG opt_bwi.h 813BWI_DEBUG_VERBOSE opt_bwi.h 814 815# options for the Marvell 8335 wireless driver 816MALO_DEBUG opt_malo.h 817MALO_TXBUF opt_malo.h 818MALO_RXBUF opt_malo.h 819 820# options for the Marvell wireless driver 821MWL_DEBUG opt_mwl.h 822MWL_TXBUF opt_mwl.h 823MWL_RXBUF opt_mwl.h 824MWL_DIAGAPI opt_mwl.h 825MWL_AGGR_SIZE opt_mwl.h 826MWL_TX_NODROP opt_mwl.h 827 828# Options for the Intel 802.11n wireless driver 829IWN_DEBUG opt_iwn.h 830 831# dcons options 832DCONS_BUF_SIZE opt_dcons.h 833DCONS_POLL_HZ opt_dcons.h 834DCONS_FORCE_CONSOLE opt_dcons.h 835DCONS_FORCE_GDB opt_dcons.h 836 837# HWPMC options 838HWPMC_HOOKS 839HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h 840 841# XBOX options for FreeBSD/i386, but some files are MI 842XBOX opt_xbox.h 843 844# Interrupt filtering 845INTR_FILTER 846 847# 802.11 support layer 848IEEE80211_DEBUG opt_wlan.h 849IEEE80211_DEBUG_REFCNT opt_wlan.h 850IEEE80211_AMPDU_AGE opt_wlan.h 851IEEE80211_SUPPORT_MESH opt_wlan.h 852IEEE80211_SUPPORT_SUPERG opt_wlan.h 853IEEE80211_SUPPORT_TDMA opt_wlan.h 854IEEE80211_ALQ opt_wlan.h 855IEEE80211_DFS_DEBUG opt_wlan.h 856 857# 802.11 TDMA support 858TDMA_SLOTLEN_DEFAULT opt_tdma.h 859TDMA_SLOTCNT_DEFAULT opt_tdma.h 860TDMA_BINTVAL_DEFAULT opt_tdma.h 861TDMA_TXRATE_11B_DEFAULT opt_tdma.h 862TDMA_TXRATE_11G_DEFAULT opt_tdma.h 863TDMA_TXRATE_11A_DEFAULT opt_tdma.h 864TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 865TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 866TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 867TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 868TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 869 870# Network stack virtualization options 871VIMAGE opt_global.h 872VNET_DEBUG opt_global.h 873 874# Common Flash Interface (CFI) options 875CFI_SUPPORT_STRATAFLASH opt_cfi.h 876CFI_ARMEDANDDANGEROUS opt_cfi.h 877 878# Sound options 879SND_DEBUG opt_snd.h 880SND_DIAGNOSTIC opt_snd.h 881SND_FEEDER_MULTIFORMAT opt_snd.h 882SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 883SND_FEEDER_RATE_HP opt_snd.h 884SND_PCM_64 opt_snd.h 885SND_OLDSTEREO opt_snd.h 886 887X86BIOS 888 889# Flattened device tree options 890FDT opt_platform.h 891FDT_DTB_STATIC opt_platform.h 892 893# OFED Infiniband stack 894OFED opt_ofed.h 895OFED_DEBUG_INIT opt_ofed.h 896SDP opt_ofed.h 897SDP_DEBUG opt_ofed.h 898IPOIB opt_ofed.h 899IPOIB_DEBUG opt_ofed.h 900IPOIB_CM opt_ofed.h 901 902# Resource Accounting 903RACCT opt_global.h 904 905# Resource Limits 906RCTL opt_global.h 907