1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affects only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AACRAID_DEBUG opt_aacraid.h 35AHC_ALLOW_MEMIO opt_aic7xxx.h 36AHC_TMODE_ENABLE opt_aic7xxx.h 37AHC_DUMP_EEPROM opt_aic7xxx.h 38AHC_DEBUG opt_aic7xxx.h 39AHC_DEBUG_OPTS opt_aic7xxx.h 40AHC_REG_PRETTY_PRINT opt_aic7xxx.h 41AHD_DEBUG opt_aic79xx.h 42AHD_DEBUG_OPTS opt_aic79xx.h 43AHD_TMODE_ENABLE opt_aic79xx.h 44AHD_REG_PRETTY_PRINT opt_aic79xx.h 45ADW_ALLOW_MEMIO opt_adw.h 46 47TWA_DEBUG opt_twa.h 48TWA_FLASH_FIRMWARE opt_twa.h 49 50# Debugging options. 51ALT_BREAK_TO_DEBUGGER opt_kdb.h 52BREAK_TO_DEBUGGER opt_kdb.h 53DDB 54DDB_BUFR_SIZE opt_ddb.h 55DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 56DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 57DDB_CTF opt_ddb.h 58DDB_NUMSYM opt_ddb.h 59GDB 60KDB opt_global.h 61KDB_TRACE opt_kdb.h 62KDB_UNATTENDED opt_kdb.h 63KLD_DEBUG opt_kld.h 64SYSCTL_DEBUG opt_sysctl.h 65EARLY_PRINTF opt_global.h 66TEXTDUMP_PREFERRED opt_ddb.h 67TEXTDUMP_VERBOSE opt_ddb.h 68 69# Miscellaneous options. 70ADAPTIVE_LOCKMGRS 71ALQ 72ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h 73ATSE_CFI_HACK opt_cfi.h 74AUDIT opt_global.h 75BOOTHOWTO opt_global.h 76BOOTVERBOSE opt_global.h 77CALLOUT_PROFILING 78CAPABILITIES opt_capsicum.h 79CAPABILITY_MODE opt_capsicum.h 80COMPAT_43 opt_compat.h 81COMPAT_43TTY opt_compat.h 82COMPAT_FREEBSD4 opt_compat.h 83COMPAT_FREEBSD5 opt_compat.h 84COMPAT_FREEBSD6 opt_compat.h 85COMPAT_FREEBSD7 opt_compat.h 86COMPILING_LINT opt_global.h 87COMPRESS_USER_CORES opt_core.h 88CY_PCI_FASTINTR 89DEADLKRES opt_watchdog.h 90DIRECTIO 91FILEMON opt_dontuse.h 92FFCLOCK 93FULL_PREEMPTION opt_sched.h 94IPI_PREEMPTION opt_sched.h 95GEOM_AES opt_geom.h 96GEOM_BDE opt_geom.h 97GEOM_BSD opt_geom.h 98GEOM_CACHE opt_geom.h 99GEOM_CONCAT opt_geom.h 100GEOM_ELI opt_geom.h 101GEOM_FOX opt_geom.h 102GEOM_GATE opt_geom.h 103GEOM_JOURNAL opt_geom.h 104GEOM_LABEL opt_geom.h 105GEOM_LINUX_LVM opt_geom.h 106GEOM_MBR opt_geom.h 107GEOM_MIRROR opt_geom.h 108GEOM_MULTIPATH opt_geom.h 109GEOM_NOP opt_geom.h 110GEOM_PART_APM opt_geom.h 111GEOM_PART_BSD opt_geom.h 112GEOM_PART_EBR opt_geom.h 113GEOM_PART_EBR_COMPAT opt_geom.h 114GEOM_PART_GPT opt_geom.h 115GEOM_PART_LDM opt_geom.h 116GEOM_PART_MBR opt_geom.h 117GEOM_PART_PC98 opt_geom.h 118GEOM_PART_VTOC8 opt_geom.h 119GEOM_PC98 opt_geom.h 120GEOM_RAID opt_geom.h 121GEOM_RAID3 opt_geom.h 122GEOM_SHSEC opt_geom.h 123GEOM_STRIPE opt_geom.h 124GEOM_SUNLABEL opt_geom.h 125GEOM_UNCOMPRESS opt_geom.h 126GEOM_UZIP opt_geom.h 127GEOM_VIRSTOR opt_geom.h 128GEOM_VOL opt_geom.h 129GEOM_ZERO opt_geom.h 130KDTRACE_HOOKS opt_global.h 131KDTRACE_FRAME opt_kdtrace.h 132KN_HASHSIZE opt_kqueue.h 133KSTACK_MAX_PAGES 134KSTACK_PAGES 135KTRACE 136KTRACE_REQUEST_POOL opt_ktrace.h 137LIBICONV 138MAC opt_global.h 139MAC_BIBA opt_dontuse.h 140MAC_BSDEXTENDED opt_dontuse.h 141MAC_IFOFF opt_dontuse.h 142MAC_LOMAC opt_dontuse.h 143MAC_MLS opt_dontuse.h 144MAC_NONE opt_dontuse.h 145MAC_PARTITION opt_dontuse.h 146MAC_PORTACL opt_dontuse.h 147MAC_SEEOTHERUIDS opt_dontuse.h 148MAC_STATIC opt_mac.h 149MAC_STUB opt_dontuse.h 150MAC_TEST opt_dontuse.h 151MD_ROOT opt_md.h 152MD_ROOT_FSTYPE opt_md.h 153MD_ROOT_SIZE opt_md.h 154MFI_DEBUG opt_mfi.h 155MFI_DECODE_LOG opt_mfi.h 156MPROF_BUFFERS opt_mprof.h 157MPROF_HASH_SIZE opt_mprof.h 158NEW_PCIB opt_global.h 159NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 160NO_ADAPTIVE_RWLOCKS 161NO_ADAPTIVE_SX 162NO_SYSCTL_DESCR opt_global.h 163NSWBUF_MIN opt_swap.h 164MBUF_PACKET_ZONE_DISABLE opt_global.h 165PANIC_REBOOT_WAIT_TIME opt_panic.h 166PPC_DEBUG opt_ppc.h 167PPC_PROBE_CHIPSET opt_ppc.h 168PPS_SYNC opt_ntp.h 169PREEMPTION opt_sched.h 170QUOTA 171SCHED_4BSD opt_sched.h 172SCHED_STATS opt_sched.h 173SCHED_ULE opt_sched.h 174SLEEPQUEUE_PROFILING 175SLHCI_DEBUG opt_slhci.h 176SPX_HACK 177STACK opt_stack.h 178SUIDDIR 179MSGMNB opt_sysvipc.h 180MSGMNI opt_sysvipc.h 181MSGSEG opt_sysvipc.h 182MSGSSZ opt_sysvipc.h 183MSGTQL opt_sysvipc.h 184SEMMNI opt_sysvipc.h 185SEMMNS opt_sysvipc.h 186SEMMNU opt_sysvipc.h 187SEMMSL opt_sysvipc.h 188SEMOPM opt_sysvipc.h 189SEMUME opt_sysvipc.h 190SHMALL opt_sysvipc.h 191SHMMAX opt_sysvipc.h 192SHMMAXPGS opt_sysvipc.h 193SHMMIN opt_sysvipc.h 194SHMMNI opt_sysvipc.h 195SHMSEG opt_sysvipc.h 196SYSVMSG opt_sysvipc.h 197SYSVSEM opt_sysvipc.h 198SYSVSHM opt_sysvipc.h 199SW_WATCHDOG opt_watchdog.h 200TURNSTILE_PROFILING 201UMTX_PROFILING 202VFS_AIO 203VERBOSE_SYSINIT opt_global.h 204WLCACHE opt_wavelan.h 205WLDEBUG opt_wavelan.h 206 207# POSIX kernel options 208P1003_1B_MQUEUE opt_posix.h 209P1003_1B_SEMAPHORES opt_posix.h 210_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 211 212# Do we want the config file compiled into the kernel? 213INCLUDE_CONFIG_FILE opt_config.h 214 215# Options for static filesystems. These should only be used at config 216# time, since the corresponding lkms cannot work if there are any static 217# dependencies. Unusability is enforced by hiding the defines for the 218# options in a never-included header. 219CD9660 opt_dontuse.h 220EXT2FS opt_dontuse.h 221FDESCFS opt_dontuse.h 222FFS opt_dontuse.h 223FUSE opt_dontuse.h 224MSDOSFS opt_dontuse.h 225NANDFS opt_dontuse.h 226NULLFS opt_dontuse.h 227PROCFS opt_dontuse.h 228PSEUDOFS opt_dontuse.h 229REISERFS opt_dontuse.h 230SMBFS opt_dontuse.h 231TMPFS opt_dontuse.h 232UDF opt_dontuse.h 233UNIONFS opt_dontuse.h 234ZFS opt_dontuse.h 235 236# Pseudofs debugging 237PSEUDOFS_TRACE opt_pseudofs.h 238 239# In-kernel GSS-API 240KGSSAPI opt_kgssapi.h 241KGSSAPI_DEBUG opt_kgssapi.h 242 243# These static filesystems have one slightly bogus static dependency in 244# sys/i386/i386/autoconf.c. If any of these filesystems are 245# statically compiled into the kernel, code for mounting them as root 246# filesystems will be enabled - but look below. 247NFSCLIENT opt_nfs.h 248NFSSERVER opt_nfs.h 249 250# Use these options to compile the experimental nfs client and/or 251# server that supports NFSv4 into a kernel. 252# NFSCL - client 253# NFSD - server 254NFSCL opt_nfs.h 255NFSD opt_nfs.h 256 257# filesystems and libiconv bridge 258CD9660_ICONV opt_dontuse.h 259MSDOSFS_ICONV opt_dontuse.h 260UDF_ICONV opt_dontuse.h 261 262# If you are following the conditions in the copyright, 263# you can enable soft-updates which will speed up a lot of thigs 264# and make the system safer from crashes at the same time. 265# otherwise a STUB module will be compiled in. 266SOFTUPDATES opt_ffs.h 267 268# On small, embedded systems, it can be useful to turn off support for 269# snapshots. It saves about 30-40k for a feature that would be lightly 270# used, if it is used at all. 271NO_FFS_SNAPSHOT opt_ffs.h 272 273# Enabling this option turns on support for Access Control Lists in UFS, 274# which can be used to support high security configurations. Depends on 275# UFS_EXTATTR. 276UFS_ACL opt_ufs.h 277 278# Enabling this option turns on support for extended attributes in UFS-based 279# filesystems, which can be used to support high security configurations 280# as well as new filesystem features. 281UFS_EXTATTR opt_ufs.h 282UFS_EXTATTR_AUTOSTART opt_ufs.h 283 284# Enable fast hash lookups for large directories on UFS-based filesystems. 285UFS_DIRHASH opt_ufs.h 286 287# Enable gjournal-based UFS journal. 288UFS_GJOURNAL opt_ufs.h 289 290# The below sentence is not in English, and neither is this one. 291# We plan to remove the static dependences above, with a 292# <filesystem>_ROOT option to control if it usable as root. This list 293# allows these options to be present in config files already (though 294# they won't make any difference yet). 295NFS_ROOT opt_nfsroot.h 296 297# SMB/CIFS requester 298NETSMB opt_netsmb.h 299 300# Options used only in subr_param.c. 301HZ opt_param.h 302MAXFILES opt_param.h 303NBUF opt_param.h 304NSFBUFS opt_param.h 305VM_BCACHE_SIZE_MAX opt_param.h 306VM_SWZONE_SIZE_MAX opt_param.h 307MAXUSERS 308DFLDSIZ opt_param.h 309MAXDSIZ opt_param.h 310MAXSSIZ opt_param.h 311 312# Generic SCSI options. 313CAM_MAX_HIGHPOWER opt_cam.h 314CAMDEBUG opt_cam.h 315CAM_DEBUG_COMPILE opt_cam.h 316CAM_DEBUG_DELAY opt_cam.h 317CAM_DEBUG_BUS opt_cam.h 318CAM_DEBUG_TARGET opt_cam.h 319CAM_DEBUG_LUN opt_cam.h 320CAM_DEBUG_FLAGS opt_cam.h 321CAM_BOOT_DELAY opt_cam.h 322SCSI_DELAY opt_scsi.h 323SCSI_NO_SENSE_STRINGS opt_scsi.h 324SCSI_NO_OP_STRINGS opt_scsi.h 325 326# Options used only in cam/ata/ata_da.c 327ADA_TEST_FAILURE opt_ada.h 328ATA_STATIC_ID opt_ada.h 329 330# Options used only in cam/scsi/scsi_cd.c 331CHANGER_MIN_BUSY_SECONDS opt_cd.h 332CHANGER_MAX_BUSY_SECONDS opt_cd.h 333 334# Options used only in cam/scsi/scsi_sa.c. 335SA_IO_TIMEOUT opt_sa.h 336SA_SPACE_TIMEOUT opt_sa.h 337SA_REWIND_TIMEOUT opt_sa.h 338SA_ERASE_TIMEOUT opt_sa.h 339SA_1FM_AT_EOD opt_sa.h 340 341# Options used only in cam/scsi/scsi_pt.c 342SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 343 344# Options used only in cam/scsi/scsi_ses.c 345SES_ENABLE_PASSTHROUGH opt_ses.h 346 347# Options used in dev/sym/ (Symbios SCSI driver). 348SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 349 # Allows the ncr to take precedence 350 # 1 (1<<0) -> 810a, 860 351 # 2 (1<<1) -> 825a, 875, 885, 895 352 # 4 (1<<2) -> 895a, 896, 1510d 353SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 354 # disabled:0 (default), enabled:1 355SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 356 # disabled:0, enabled:1 (default) 357SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 358 # default:8, range:[1..64] 359 360# Options used only in pci/ncr.c 361SCSI_NCR_DEBUG opt_ncr.h 362SCSI_NCR_MAX_SYNC opt_ncr.h 363SCSI_NCR_MAX_WIDE opt_ncr.h 364SCSI_NCR_MYADDR opt_ncr.h 365 366# Options used only in dev/isp/* 367ISP_TARGET_MODE opt_isp.h 368ISP_FW_CRASH_DUMP opt_isp.h 369ISP_DEFAULT_ROLES opt_isp.h 370ISP_INTERNAL_TARGET opt_isp.h 371 372# Options used only in dev/iscsi 373ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 374 375# Net stuff. 376ACCEPT_FILTER_DATA 377ACCEPT_FILTER_DNS 378ACCEPT_FILTER_HTTP 379ALTQ opt_global.h 380ALTQ_CBQ opt_altq.h 381ALTQ_CDNR opt_altq.h 382ALTQ_DEBUG opt_altq.h 383ALTQ_HFSC opt_altq.h 384ALTQ_NOPCC opt_altq.h 385ALTQ_PRIQ opt_altq.h 386ALTQ_RED opt_altq.h 387ALTQ_RIO opt_altq.h 388BOOTP opt_bootp.h 389BOOTP_BLOCKSIZE opt_bootp.h 390BOOTP_COMPAT opt_bootp.h 391BOOTP_NFSROOT opt_bootp.h 392BOOTP_NFSV3 opt_bootp.h 393BOOTP_WIRED_TO opt_bootp.h 394DEVICE_POLLING 395DEV_ENC opt_enc.h 396DEV_PF opt_pf.h 397DEV_PFLOG opt_pf.h 398DEV_PFSYNC opt_pf.h 399DEV_VLAN opt_vlan.h 400DUMMYNET opt_ipdn.h 401INET opt_inet.h 402INET6 opt_inet6.h 403IPDIVERT 404IPFILTER opt_ipfilter.h 405IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 406IPFILTER_LOG opt_ipfilter.h 407IPFILTER_LOOKUP opt_ipfilter.h 408IPFIREWALL opt_ipfw.h 409IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 410IPFIREWALL_NAT opt_ipfw.h 411IPFIREWALL_VERBOSE opt_ipfw.h 412IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 413IPSEC opt_ipsec.h 414IPSEC_DEBUG opt_ipsec.h 415IPSEC_FILTERTUNNEL opt_ipsec.h 416IPSEC_NAT_T opt_ipsec.h 417IPSTEALTH 418KRPC 419LIBALIAS 420LIBMBPOOL 421LIBMCHAIN 422MBUF_PROFILING 423MBUF_STRESS_TEST 424MROUTING opt_mrouting.h 425NFSLOCKD 426PCBGROUP opt_pcbgroup.h 427PF_DEFAULT_TO_DROP opt_pf.h 428RADIX_MPATH opt_mpath.h 429ROUTETABLES opt_route.h 430SLIP_IFF_OPTS opt_slip.h 431TCPDEBUG 432TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading 433TCP_SIGNATURE opt_inet.h 434VLAN_ARRAY opt_vlan.h 435XBONEHACK 436FLOWTABLE opt_route.h 437FLOWTABLE_HASH_ALL opt_route.h 438 439# 440# SCTP 441# 442SCTP opt_sctp.h 443SCTP_DEBUG opt_sctp.h # Enable debug printfs 444SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril 445SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 446SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 447SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 448SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 449SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 450SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 451SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 452SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 453# 454# 455# 456 457# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 458# Each netgraph node type can be either be compiled into the kernel 459# or loaded dynamically. To get the former, include the corresponding 460# option below. Each type has its own man page, e.g. ng_async(4). 461NETGRAPH 462NETGRAPH_DEBUG opt_netgraph.h 463NETGRAPH_ASYNC opt_netgraph.h 464NETGRAPH_ATMLLC opt_netgraph.h 465NETGRAPH_ATM_ATMPIF opt_netgraph.h 466NETGRAPH_BLUETOOTH opt_netgraph.h 467NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 468NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 469NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 470NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 471NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 472NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 473NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 474NETGRAPH_BPF opt_netgraph.h 475NETGRAPH_BRIDGE opt_netgraph.h 476NETGRAPH_CAR opt_netgraph.h 477NETGRAPH_CISCO opt_netgraph.h 478NETGRAPH_DEFLATE opt_netgraph.h 479NETGRAPH_DEVICE opt_netgraph.h 480NETGRAPH_ECHO opt_netgraph.h 481NETGRAPH_EIFACE opt_netgraph.h 482NETGRAPH_ETHER opt_netgraph.h 483NETGRAPH_ETHER_ECHO opt_netgraph.h 484NETGRAPH_FEC opt_netgraph.h 485NETGRAPH_FRAME_RELAY opt_netgraph.h 486NETGRAPH_GIF opt_netgraph.h 487NETGRAPH_GIF_DEMUX opt_netgraph.h 488NETGRAPH_HOLE opt_netgraph.h 489NETGRAPH_IFACE opt_netgraph.h 490NETGRAPH_IP_INPUT opt_netgraph.h 491NETGRAPH_IPFW opt_netgraph.h 492NETGRAPH_KSOCKET opt_netgraph.h 493NETGRAPH_L2TP opt_netgraph.h 494NETGRAPH_LMI opt_netgraph.h 495# MPPC compression requires proprietary files (not included) 496NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 497NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 498NETGRAPH_NAT opt_netgraph.h 499NETGRAPH_NETFLOW opt_netgraph.h 500NETGRAPH_ONE2MANY opt_netgraph.h 501NETGRAPH_PATCH opt_netgraph.h 502NETGRAPH_PIPE opt_netgraph.h 503NETGRAPH_PPP opt_netgraph.h 504NETGRAPH_PPPOE opt_netgraph.h 505NETGRAPH_PPTPGRE opt_netgraph.h 506NETGRAPH_PRED1 opt_netgraph.h 507NETGRAPH_RFC1490 opt_netgraph.h 508NETGRAPH_SOCKET opt_netgraph.h 509NETGRAPH_SPLIT opt_netgraph.h 510NETGRAPH_SPPP opt_netgraph.h 511NETGRAPH_TAG opt_netgraph.h 512NETGRAPH_TCPMSS opt_netgraph.h 513NETGRAPH_TEE opt_netgraph.h 514NETGRAPH_TTY opt_netgraph.h 515NETGRAPH_UI opt_netgraph.h 516NETGRAPH_VJC opt_netgraph.h 517NETGRAPH_VLAN opt_netgraph.h 518 519# NgATM options 520NGATM_ATM opt_netgraph.h 521NGATM_ATMBASE opt_netgraph.h 522NGATM_SSCOP opt_netgraph.h 523NGATM_SSCFU opt_netgraph.h 524NGATM_UNI opt_netgraph.h 525NGATM_CCATM opt_netgraph.h 526 527# DRM options 528DRM_DEBUG opt_drm.h 529 530TI_SF_BUF_JUMBO opt_ti.h 531TI_JUMBO_HDRSPLIT opt_ti.h 532 533# XXX Conflict: # of devices vs network protocol (Native ATM). 534# This makes "atm.h" unusable. 535NATM 536 537# DPT driver debug flags 538DPT_MEASURE_PERFORMANCE opt_dpt.h 539DPT_RESET_HBA opt_dpt.h 540 541# Misc debug flags. Most of these should probably be replaced with 542# 'DEBUG', and then let people recompile just the interesting modules 543# with 'make CC="cc -DDEBUG"'. 544CLUSTERDEBUG opt_debug_cluster.h 545DEBUG_1284 opt_ppb_1284.h 546VP0_DEBUG opt_vpo.h 547LPT_DEBUG opt_lpt.h 548PLIP_DEBUG opt_plip.h 549LOCKF_DEBUG opt_debug_lockf.h 550SI_DEBUG opt_debug_si.h 551 552# Fb options 553FB_DEBUG opt_fb.h 554FB_INSTALL_CDEV opt_fb.h 555 556# ppbus related options 557PERIPH_1284 opt_ppb_1284.h 558DONTPROBE_1284 opt_ppb_1284.h 559 560# smbus related options 561ENABLE_ALART opt_intpm.h 562 563# These cause changes all over the kernel 564BLKDEV_IOSIZE opt_global.h 565BURN_BRIDGES opt_global.h 566DEBUG opt_global.h 567DEBUG_LOCKS opt_global.h 568DEBUG_VFS_LOCKS opt_global.h 569DFLTPHYS opt_global.h 570DIAGNOSTIC opt_global.h 571INVARIANT_SUPPORT opt_global.h 572INVARIANTS opt_global.h 573MAXCPU opt_global.h 574MAXMEMDOM opt_global.h 575MAXPHYS opt_global.h 576MCLSHIFT opt_global.h 577MUTEX_DEBUG opt_global.h 578MUTEX_NOINLINE opt_global.h 579LOCK_PROFILING opt_global.h 580LOCK_PROFILING_FAST opt_global.h 581MSIZE opt_global.h 582REGRESSION opt_global.h 583RWLOCK_NOINLINE opt_global.h 584SX_NOINLINE opt_global.h 585VFS_BIO_DEBUG opt_global.h 586 587# These are VM related options 588VM_KMEM_SIZE opt_vm.h 589VM_KMEM_SIZE_SCALE opt_vm.h 590VM_KMEM_SIZE_MAX opt_vm.h 591VM_NRESERVLEVEL opt_vm.h 592VM_LEVEL_0_ORDER opt_vm.h 593NO_SWAPPING opt_vm.h 594MALLOC_MAKE_FAILURES opt_vm.h 595MALLOC_PROFILE opt_vm.h 596MALLOC_DEBUG_MAXZONES opt_vm.h 597 598# The MemGuard replacement allocator used for tamper-after-free detection 599DEBUG_MEMGUARD opt_vm.h 600 601# The RedZone malloc(9) protection 602DEBUG_REDZONE opt_vm.h 603 604# Standard SMP options 605SMP opt_global.h 606 607# Size of the kernel message buffer 608MSGBUF_SIZE opt_msgbuf.h 609 610# NFS options 611NFS_MINATTRTIMO opt_nfs.h 612NFS_MAXATTRTIMO opt_nfs.h 613NFS_MINDIRATTRTIMO opt_nfs.h 614NFS_MAXDIRATTRTIMO opt_nfs.h 615NFS_GATHERDELAY opt_nfs.h 616NFS_WDELAYHASHSIZ opt_nfs.h 617NFS_DEBUG opt_nfs.h 618 619# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 620OVERRIDE_CARD opt_bktr.h 621OVERRIDE_TUNER opt_bktr.h 622OVERRIDE_DBX opt_bktr.h 623OVERRIDE_MSP opt_bktr.h 624BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 625BROOKTREE_ALLOC_PAGES opt_bktr.h 626BKTR_OVERRIDE_CARD opt_bktr.h 627BKTR_OVERRIDE_TUNER opt_bktr.h 628BKTR_OVERRIDE_DBX opt_bktr.h 629BKTR_OVERRIDE_MSP opt_bktr.h 630BKTR_SYSTEM_DEFAULT opt_bktr.h 631BKTR_ALLOC_PAGES opt_bktr.h 632BKTR_USE_PLL opt_bktr.h 633BKTR_GPIO_ACCESS opt_bktr.h 634BKTR_NO_MSP_RESET opt_bktr.h 635BKTR_430_FX_MODE opt_bktr.h 636BKTR_SIS_VIA_MODE opt_bktr.h 637BKTR_USE_FREEBSD_SMBUS opt_bktr.h 638BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 639 640# Options for uart(4) 641UART_PPS_ON_CTS opt_uart.h 642UART_POLL_FREQ opt_uart.h 643 644# options for bus/device framework 645BUS_DEBUG opt_bus.h 646 647# options for USB support 648USB_DEBUG opt_usb.h 649USB_HOST_ALIGN opt_usb.h 650USB_REQ_DEBUG opt_usb.h 651USB_TEMPLATE opt_usb.h 652USB_VERBOSE opt_usb.h 653USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 654U3G_DEBUG opt_u3g.h 655UKBD_DFLT_KEYMAP opt_ukbd.h 656UPLCOM_INTR_INTERVAL opt_uplcom.h 657UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 658UVSCOM_INTR_INTERVAL opt_uvscom.h 659 660# Embedded system options 661INIT_PATH 662 663ROOTDEVNAME 664 665FDC_DEBUG opt_fdc.h 666PCFCLOCK_VERBOSE opt_pcfclock.h 667PCFCLOCK_MAX_RETRIES opt_pcfclock.h 668 669KTR opt_global.h 670KTR_ALQ opt_ktr.h 671KTR_MASK opt_ktr.h 672KTR_CPUMASK opt_ktr.h 673KTR_COMPILE opt_global.h 674KTR_BOOT_ENTRIES opt_global.h 675KTR_ENTRIES opt_global.h 676KTR_VERBOSE opt_ktr.h 677WITNESS opt_global.h 678WITNESS_KDB opt_witness.h 679WITNESS_NO_VNODE opt_witness.h 680WITNESS_SKIPSPIN opt_witness.h 681OPENSOLARIS_WITNESS opt_global.h 682 683# options for ACPI support 684ACPI_DEBUG opt_acpi.h 685ACPI_MAX_TASKS opt_acpi.h 686ACPI_MAX_THREADS opt_acpi.h 687ACPI_DMAR opt_acpi.h 688 689# ISA support 690DEV_ISA opt_isa.h 691ISAPNP opt_isa.h 692 693# various 'device presence' options. 694DEV_BPF opt_bpf.h 695DEV_NETMAP opt_global.h 696DEV_MCA opt_mca.h 697DEV_CARP opt_carp.h 698DEV_SPLASH opt_splash.h 699 700# EISA support 701DEV_EISA opt_eisa.h 702EISA_SLOTS opt_eisa.h 703 704# ed driver 705ED_HPP opt_ed.h 706ED_3C503 opt_ed.h 707ED_SIC opt_ed.h 708 709# bce driver 710BCE_DEBUG opt_bce.h 711BCE_NVRAM_WRITE_SUPPORT opt_bce.h 712 713SOCKBUF_DEBUG opt_global.h 714 715 716# options for ubsec driver 717UBSEC_DEBUG opt_ubsec.h 718UBSEC_RNDTEST opt_ubsec.h 719UBSEC_NO_RNG opt_ubsec.h 720 721# options for hifn driver 722HIFN_DEBUG opt_hifn.h 723HIFN_RNDTEST opt_hifn.h 724 725# options for safenet driver 726SAFE_DEBUG opt_safe.h 727SAFE_NO_RNG opt_safe.h 728SAFE_RNDTEST opt_safe.h 729 730# syscons/vt options 731MAXCONS opt_syscons.h 732VT_FB_DEFAULT_WIDTH opt_syscons.h 733VT_FB_DEFAULT_HEIGHT opt_syscons.h 734SC_ALT_MOUSE_IMAGE opt_syscons.h 735SC_CUT_SPACES2TABS opt_syscons.h 736SC_CUT_SEPCHARS opt_syscons.h 737SC_DEBUG_LEVEL opt_syscons.h 738SC_DFLT_FONT opt_syscons.h 739SC_DISABLE_KDBKEY opt_syscons.h 740SC_DISABLE_REBOOT opt_syscons.h 741SC_HISTORY_SIZE opt_syscons.h 742SC_KERNEL_CONS_ATTR opt_syscons.h 743SC_KERNEL_CONS_REV_ATTR opt_syscons.h 744SC_MOUSE_CHAR opt_syscons.h 745SC_NO_CUTPASTE opt_syscons.h 746SC_NO_FONT_LOADING opt_syscons.h 747SC_NO_HISTORY opt_syscons.h 748SC_NO_MODE_CHANGE opt_syscons.h 749SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 750SC_NO_SYSMOUSE opt_syscons.h 751SC_NORM_ATTR opt_syscons.h 752SC_NORM_REV_ATTR opt_syscons.h 753SC_PIXEL_MODE opt_syscons.h 754SC_RENDER_DEBUG opt_syscons.h 755SC_TWOBUTTON_MOUSE opt_syscons.h 756DEV_SC opt_syscons.h 757DEV_VT opt_syscons.h 758 759 760# teken terminal emulator options 761TEKEN_CONS25 opt_teken.h 762TEKEN_UTF8 opt_teken.h 763 764# options for printf 765PRINTF_BUFR_SIZE opt_printf.h 766 767# kbd options 768KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 769KBD_INSTALL_CDEV opt_kbd.h 770KBD_MAXRETRY opt_kbd.h 771KBD_MAXWAIT opt_kbd.h 772KBD_RESETDELAY opt_kbd.h 773KBDIO_DEBUG opt_kbd.h 774 775# options for the Atheros driver 776ATH_DEBUG opt_ath.h 777ATH_TXBUF opt_ath.h 778ATH_RXBUF opt_ath.h 779ATH_DIAGAPI opt_ath.h 780ATH_TX99_DIAG opt_ath.h 781ATH_ENABLE_11N opt_ath.h 782ATH_ENABLE_DFS opt_ath.h 783ATH_EEPROM_FIRMWARE opt_ath.h 784ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 785ATH_DEBUG_ALQ opt_ath.h 786ATH_KTR_INTR_DEBUG opt_ath.h 787 788# options for the Atheros hal 789AH_SUPPORT_AR5416 opt_ah.h 790# XXX For now, this breaks non-AR9130 chipsets, so only use it 791# XXX when actually targetting AR9130. 792AH_SUPPORT_AR9130 opt_ah.h 793 794# This is required for AR933x SoC support 795AH_SUPPORT_AR9330 opt_ah.h 796AH_SUPPORT_AR9340 opt_ah.h 797 798AH_DEBUG opt_ah.h 799AH_ASSERT opt_ah.h 800AH_DEBUG_ALQ opt_ah.h 801AH_REGOPS_FUNC opt_ah.h 802AH_WRITE_REGDOMAIN opt_ah.h 803AH_DEBUG_COUNTRY opt_ah.h 804AH_WRITE_EEPROM opt_ah.h 805AH_PRIVATE_DIAG opt_ah.h 806AH_NEED_DESC_SWAP opt_ah.h 807AH_USE_INIPDGAIN opt_ah.h 808AH_MAXCHAN opt_ah.h 809AH_RXCFG_SDMAMW_4BYTES opt_ah.h 810AH_INTERRUPT_DEBUGGING opt_ah.h 811# AR5416 and later interrupt mitigation 812# XXX do not use this for AR9130 813AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 814 815# options for the Broadcom BCM43xx driver (bwi) 816BWI_DEBUG opt_bwi.h 817BWI_DEBUG_VERBOSE opt_bwi.h 818 819# options for the Marvell 8335 wireless driver 820MALO_DEBUG opt_malo.h 821MALO_TXBUF opt_malo.h 822MALO_RXBUF opt_malo.h 823 824# options for the Marvell wireless driver 825MWL_DEBUG opt_mwl.h 826MWL_TXBUF opt_mwl.h 827MWL_RXBUF opt_mwl.h 828MWL_DIAGAPI opt_mwl.h 829MWL_AGGR_SIZE opt_mwl.h 830MWL_TX_NODROP opt_mwl.h 831 832# Options for the Intel 802.11n wireless driver 833IWN_DEBUG opt_iwn.h 834 835# dcons options 836DCONS_BUF_SIZE opt_dcons.h 837DCONS_POLL_HZ opt_dcons.h 838DCONS_FORCE_CONSOLE opt_dcons.h 839DCONS_FORCE_GDB opt_dcons.h 840 841# HWPMC options 842HWPMC_HOOKS 843HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h 844 845# XBOX options for FreeBSD/i386, but some files are MI 846XBOX opt_xbox.h 847 848# Interrupt filtering 849INTR_FILTER 850 851# 802.11 support layer 852IEEE80211_DEBUG opt_wlan.h 853IEEE80211_DEBUG_REFCNT opt_wlan.h 854IEEE80211_AMPDU_AGE opt_wlan.h 855IEEE80211_SUPPORT_MESH opt_wlan.h 856IEEE80211_SUPPORT_SUPERG opt_wlan.h 857IEEE80211_SUPPORT_TDMA opt_wlan.h 858IEEE80211_ALQ opt_wlan.h 859IEEE80211_DFS_DEBUG opt_wlan.h 860 861# 802.11 TDMA support 862TDMA_SLOTLEN_DEFAULT opt_tdma.h 863TDMA_SLOTCNT_DEFAULT opt_tdma.h 864TDMA_BINTVAL_DEFAULT opt_tdma.h 865TDMA_TXRATE_11B_DEFAULT opt_tdma.h 866TDMA_TXRATE_11G_DEFAULT opt_tdma.h 867TDMA_TXRATE_11A_DEFAULT opt_tdma.h 868TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 869TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 870TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 871TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 872TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 873 874# Network stack virtualization options 875VIMAGE opt_global.h 876VNET_DEBUG opt_global.h 877 878# Common Flash Interface (CFI) options 879CFI_SUPPORT_STRATAFLASH opt_cfi.h 880CFI_ARMEDANDDANGEROUS opt_cfi.h 881 882# Sound options 883SND_DEBUG opt_snd.h 884SND_DIAGNOSTIC opt_snd.h 885SND_FEEDER_MULTIFORMAT opt_snd.h 886SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 887SND_FEEDER_RATE_HP opt_snd.h 888SND_PCM_64 opt_snd.h 889SND_OLDSTEREO opt_snd.h 890 891X86BIOS 892 893# Flattened device tree options 894FDT opt_platform.h 895FDT_DTB_STATIC opt_platform.h 896 897# OFED Infiniband stack 898OFED opt_ofed.h 899OFED_DEBUG_INIT opt_ofed.h 900SDP opt_ofed.h 901SDP_DEBUG opt_ofed.h 902IPOIB opt_ofed.h 903IPOIB_DEBUG opt_ofed.h 904IPOIB_CM opt_ofed.h 905 906# Resource Accounting 907RACCT opt_global.h 908 909# Resource Limits 910RCTL opt_global.h 911 912# Random number generator(s) 913RANDOM_YARROW opt_random.h 914RANDOM_FORTUNA opt_random.h 915RANDOM_DEBUG opt_random.h 916RANDOM_RWFILE opt_random.h 917