1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affects only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AACRAID_DEBUG opt_aacraid.h 35AHC_ALLOW_MEMIO opt_aic7xxx.h 36AHC_TMODE_ENABLE opt_aic7xxx.h 37AHC_DUMP_EEPROM opt_aic7xxx.h 38AHC_DEBUG opt_aic7xxx.h 39AHC_DEBUG_OPTS opt_aic7xxx.h 40AHC_REG_PRETTY_PRINT opt_aic7xxx.h 41AHD_DEBUG opt_aic79xx.h 42AHD_DEBUG_OPTS opt_aic79xx.h 43AHD_TMODE_ENABLE opt_aic79xx.h 44AHD_REG_PRETTY_PRINT opt_aic79xx.h 45ADW_ALLOW_MEMIO opt_adw.h 46 47TWA_DEBUG opt_twa.h 48TWA_FLASH_FIRMWARE opt_twa.h 49 50# Debugging options. 51ALT_BREAK_TO_DEBUGGER opt_kdb.h 52BREAK_TO_DEBUGGER opt_kdb.h 53DDB 54DDB_BUFR_SIZE opt_ddb.h 55DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 56DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 57DDB_CTF opt_ddb.h 58DDB_NUMSYM opt_ddb.h 59GDB 60KDB opt_global.h 61KDB_TRACE opt_kdb.h 62KDB_UNATTENDED opt_kdb.h 63KLD_DEBUG opt_kld.h 64SYSCTL_DEBUG opt_sysctl.h 65EARLY_PRINTF opt_global.h 66TEXTDUMP_PREFERRED opt_ddb.h 67TEXTDUMP_VERBOSE opt_ddb.h 68 69# Miscellaneous options. 70ADAPTIVE_LOCKMGRS 71ALQ 72ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h 73ATSE_CFI_HACK opt_cfi.h 74AUDIT opt_global.h 75BOOTHOWTO opt_global.h 76BOOTVERBOSE opt_global.h 77CALLOUT_PROFILING 78CAPABILITIES opt_capsicum.h 79CAPABILITY_MODE opt_capsicum.h 80COMPAT_43 opt_compat.h 81COMPAT_43TTY opt_compat.h 82COMPAT_FREEBSD4 opt_compat.h 83COMPAT_FREEBSD5 opt_compat.h 84COMPAT_FREEBSD6 opt_compat.h 85COMPAT_FREEBSD7 opt_compat.h 86COMPAT_FREEBSD9 opt_compat.h 87COMPAT_FREEBSD10 opt_compat.h 88COMPAT_CLOUDABI64 opt_dontuse.h 89COMPAT_LINUXAPI opt_compat.h 90COMPILING_LINT opt_global.h 91CY_PCI_FASTINTR 92DEADLKRES opt_watchdog.h 93DIRECTIO 94FILEMON opt_dontuse.h 95FFCLOCK 96FULL_PREEMPTION opt_sched.h 97GZIO opt_gzio.h 98IMAGACT_BINMISC opt_dontuse.h 99IPI_PREEMPTION opt_sched.h 100GEOM_AES opt_geom.h 101GEOM_BDE opt_geom.h 102GEOM_BSD opt_geom.h 103GEOM_CACHE opt_geom.h 104GEOM_CONCAT opt_geom.h 105GEOM_ELI opt_geom.h 106GEOM_FOX opt_geom.h 107GEOM_GATE opt_geom.h 108GEOM_JOURNAL opt_geom.h 109GEOM_LABEL opt_geom.h 110GEOM_LABEL_GPT opt_geom.h 111GEOM_LINUX_LVM opt_geom.h 112GEOM_MAP opt_geom.h 113GEOM_MBR opt_geom.h 114GEOM_MIRROR opt_geom.h 115GEOM_MULTIPATH opt_geom.h 116GEOM_NOP opt_geom.h 117GEOM_PART_APM opt_geom.h 118GEOM_PART_BSD opt_geom.h 119GEOM_PART_BSD64 opt_geom.h 120GEOM_PART_EBR opt_geom.h 121GEOM_PART_EBR_COMPAT opt_geom.h 122GEOM_PART_GPT opt_geom.h 123GEOM_PART_LDM opt_geom.h 124GEOM_PART_MBR opt_geom.h 125GEOM_PART_PC98 opt_geom.h 126GEOM_PART_VTOC8 opt_geom.h 127GEOM_PC98 opt_geom.h 128GEOM_RAID opt_geom.h 129GEOM_RAID3 opt_geom.h 130GEOM_SHSEC opt_geom.h 131GEOM_STRIPE opt_geom.h 132GEOM_SUNLABEL opt_geom.h 133GEOM_UNCOMPRESS opt_geom.h 134GEOM_UNCOMPRESS_DEBUG opt_geom.h 135GEOM_UZIP opt_geom.h 136GEOM_VINUM opt_geom.h 137GEOM_VIRSTOR opt_geom.h 138GEOM_VOL opt_geom.h 139GEOM_ZERO opt_geom.h 140KDTRACE_HOOKS opt_global.h 141KDTRACE_FRAME opt_kdtrace.h 142KN_HASHSIZE opt_kqueue.h 143KSTACK_MAX_PAGES 144KSTACK_PAGES 145KSTACK_USAGE_PROF 146KTRACE 147KTRACE_REQUEST_POOL opt_ktrace.h 148LIBICONV 149MAC opt_global.h 150MAC_BIBA opt_dontuse.h 151MAC_BSDEXTENDED opt_dontuse.h 152MAC_IFOFF opt_dontuse.h 153MAC_LOMAC opt_dontuse.h 154MAC_MLS opt_dontuse.h 155MAC_NONE opt_dontuse.h 156MAC_PARTITION opt_dontuse.h 157MAC_PORTACL opt_dontuse.h 158MAC_SEEOTHERUIDS opt_dontuse.h 159MAC_STATIC opt_mac.h 160MAC_STUB opt_dontuse.h 161MAC_TEST opt_dontuse.h 162MD_ROOT opt_md.h 163MD_ROOT_FSTYPE opt_md.h 164MD_ROOT_SIZE opt_md.h 165MFI_DEBUG opt_mfi.h 166MFI_DECODE_LOG opt_mfi.h 167MPROF_BUFFERS opt_mprof.h 168MPROF_HASH_SIZE opt_mprof.h 169NEW_PCIB opt_global.h 170NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 171NO_ADAPTIVE_RWLOCKS 172NO_ADAPTIVE_SX 173NO_EVENTTIMERS opt_timer.h 174NO_SYSCTL_DESCR opt_global.h 175NSWBUF_MIN opt_swap.h 176MBUF_PACKET_ZONE_DISABLE opt_global.h 177PANIC_REBOOT_WAIT_TIME opt_panic.h 178PCI_IOV opt_global.h 179PPC_DEBUG opt_ppc.h 180PPC_PROBE_CHIPSET opt_ppc.h 181PPS_SYNC opt_ntp.h 182PREEMPTION opt_sched.h 183QUOTA 184SCHED_4BSD opt_sched.h 185SCHED_STATS opt_sched.h 186SCHED_ULE opt_sched.h 187SLEEPQUEUE_PROFILING 188SLHCI_DEBUG opt_slhci.h 189SPX_HACK 190STACK opt_stack.h 191SUIDDIR 192MSGMNB opt_sysvipc.h 193MSGMNI opt_sysvipc.h 194MSGSEG opt_sysvipc.h 195MSGSSZ opt_sysvipc.h 196MSGTQL opt_sysvipc.h 197SEMMNI opt_sysvipc.h 198SEMMNS opt_sysvipc.h 199SEMMNU opt_sysvipc.h 200SEMMSL opt_sysvipc.h 201SEMOPM opt_sysvipc.h 202SEMUME opt_sysvipc.h 203SHMALL opt_sysvipc.h 204SHMMAX opt_sysvipc.h 205SHMMAXPGS opt_sysvipc.h 206SHMMIN opt_sysvipc.h 207SHMMNI opt_sysvipc.h 208SHMSEG opt_sysvipc.h 209SYSVMSG opt_sysvipc.h 210SYSVSEM opt_sysvipc.h 211SYSVSHM opt_sysvipc.h 212SW_WATCHDOG opt_watchdog.h 213TURNSTILE_PROFILING 214UMTX_PROFILING 215VFS_AIO 216VERBOSE_SYSINIT 217WLCACHE opt_wavelan.h 218WLDEBUG opt_wavelan.h 219 220# POSIX kernel options 221P1003_1B_MQUEUE opt_posix.h 222P1003_1B_SEMAPHORES opt_posix.h 223_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 224 225# Do we want the config file compiled into the kernel? 226INCLUDE_CONFIG_FILE opt_config.h 227 228# Options for static filesystems. These should only be used at config 229# time, since the corresponding lkms cannot work if there are any static 230# dependencies. Unusability is enforced by hiding the defines for the 231# options in a never-included header. 232AUTOFS opt_dontuse.h 233CD9660 opt_dontuse.h 234EXT2FS opt_dontuse.h 235FDESCFS opt_dontuse.h 236FFS opt_dontuse.h 237FUSE opt_dontuse.h 238MSDOSFS opt_dontuse.h 239NANDFS opt_dontuse.h 240NULLFS opt_dontuse.h 241PROCFS opt_dontuse.h 242PSEUDOFS opt_dontuse.h 243REISERFS opt_dontuse.h 244SMBFS opt_dontuse.h 245TMPFS opt_dontuse.h 246UDF opt_dontuse.h 247UNIONFS opt_dontuse.h 248ZFS opt_dontuse.h 249 250# Pseudofs debugging 251PSEUDOFS_TRACE opt_pseudofs.h 252 253# In-kernel GSS-API 254KGSSAPI opt_kgssapi.h 255KGSSAPI_DEBUG opt_kgssapi.h 256 257# These static filesystems have one slightly bogus static dependency in 258# sys/i386/i386/autoconf.c. If any of these filesystems are 259# statically compiled into the kernel, code for mounting them as root 260# filesystems will be enabled - but look below. 261# NFSCL - client 262# NFSD - server 263NFSCL opt_nfs.h 264NFSD opt_nfs.h 265 266# filesystems and libiconv bridge 267CD9660_ICONV opt_dontuse.h 268MSDOSFS_ICONV opt_dontuse.h 269UDF_ICONV opt_dontuse.h 270 271# If you are following the conditions in the copyright, 272# you can enable soft-updates which will speed up a lot of thigs 273# and make the system safer from crashes at the same time. 274# otherwise a STUB module will be compiled in. 275SOFTUPDATES opt_ffs.h 276 277# On small, embedded systems, it can be useful to turn off support for 278# snapshots. It saves about 30-40k for a feature that would be lightly 279# used, if it is used at all. 280NO_FFS_SNAPSHOT opt_ffs.h 281 282# Enabling this option turns on support for Access Control Lists in UFS, 283# which can be used to support high security configurations. Depends on 284# UFS_EXTATTR. 285UFS_ACL opt_ufs.h 286 287# Enabling this option turns on support for extended attributes in UFS-based 288# filesystems, which can be used to support high security configurations 289# as well as new filesystem features. 290UFS_EXTATTR opt_ufs.h 291UFS_EXTATTR_AUTOSTART opt_ufs.h 292 293# Enable fast hash lookups for large directories on UFS-based filesystems. 294UFS_DIRHASH opt_ufs.h 295 296# Enable gjournal-based UFS journal. 297UFS_GJOURNAL opt_ufs.h 298 299# The below sentence is not in English, and neither is this one. 300# We plan to remove the static dependences above, with a 301# <filesystem>_ROOT option to control if it usable as root. This list 302# allows these options to be present in config files already (though 303# they won't make any difference yet). 304NFS_ROOT opt_nfsroot.h 305 306# SMB/CIFS requester 307NETSMB opt_netsmb.h 308 309# Options used only in subr_param.c. 310HZ opt_param.h 311MAXFILES opt_param.h 312NBUF opt_param.h 313NSFBUFS opt_param.h 314VM_BCACHE_SIZE_MAX opt_param.h 315VM_SWZONE_SIZE_MAX opt_param.h 316MAXUSERS 317DFLDSIZ opt_param.h 318MAXDSIZ opt_param.h 319MAXSSIZ opt_param.h 320 321# Generic SCSI options. 322CAM_MAX_HIGHPOWER opt_cam.h 323CAMDEBUG opt_cam.h 324CAM_DEBUG_COMPILE opt_cam.h 325CAM_DEBUG_DELAY opt_cam.h 326CAM_DEBUG_BUS opt_cam.h 327CAM_DEBUG_TARGET opt_cam.h 328CAM_DEBUG_LUN opt_cam.h 329CAM_DEBUG_FLAGS opt_cam.h 330CAM_BOOT_DELAY opt_cam.h 331SCSI_DELAY opt_scsi.h 332SCSI_NO_SENSE_STRINGS opt_scsi.h 333SCSI_NO_OP_STRINGS opt_scsi.h 334 335# Options used only in cam/ata/ata_da.c 336ADA_TEST_FAILURE opt_ada.h 337ATA_STATIC_ID opt_ada.h 338 339# Options used only in cam/scsi/scsi_cd.c 340CHANGER_MIN_BUSY_SECONDS opt_cd.h 341CHANGER_MAX_BUSY_SECONDS opt_cd.h 342 343# Options used only in cam/scsi/scsi_sa.c. 344SA_IO_TIMEOUT opt_sa.h 345SA_SPACE_TIMEOUT opt_sa.h 346SA_REWIND_TIMEOUT opt_sa.h 347SA_ERASE_TIMEOUT opt_sa.h 348SA_1FM_AT_EOD opt_sa.h 349 350# Options used only in cam/scsi/scsi_pt.c 351SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 352 353# Options used only in cam/scsi/scsi_ses.c 354SES_ENABLE_PASSTHROUGH opt_ses.h 355 356# Options used in dev/sym/ (Symbios SCSI driver). 357SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 358 # Allows the ncr to take precedence 359 # 1 (1<<0) -> 810a, 860 360 # 2 (1<<1) -> 825a, 875, 885, 895 361 # 4 (1<<2) -> 895a, 896, 1510d 362SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 363 # disabled:0 (default), enabled:1 364SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 365 # disabled:0, enabled:1 (default) 366SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 367 # default:8, range:[1..64] 368 369# Options used only in dev/ncr/* 370SCSI_NCR_DEBUG opt_ncr.h 371SCSI_NCR_MAX_SYNC opt_ncr.h 372SCSI_NCR_MAX_WIDE opt_ncr.h 373SCSI_NCR_MYADDR opt_ncr.h 374 375# Options used only in dev/isp/* 376ISP_TARGET_MODE opt_isp.h 377ISP_FW_CRASH_DUMP opt_isp.h 378ISP_DEFAULT_ROLES opt_isp.h 379ISP_INTERNAL_TARGET opt_isp.h 380 381# Options used only in dev/iscsi 382ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 383 384# Net stuff. 385ACCEPT_FILTER_DATA 386ACCEPT_FILTER_DNS 387ACCEPT_FILTER_HTTP 388ALTQ opt_global.h 389ALTQ_CBQ opt_altq.h 390ALTQ_CDNR opt_altq.h 391ALTQ_DEBUG opt_altq.h 392ALTQ_HFSC opt_altq.h 393ALTQ_FAIRQ opt_altq.h 394ALTQ_NOPCC opt_altq.h 395ALTQ_PRIQ opt_altq.h 396ALTQ_RED opt_altq.h 397ALTQ_RIO opt_altq.h 398BOOTP opt_bootp.h 399BOOTP_BLOCKSIZE opt_bootp.h 400BOOTP_COMPAT opt_bootp.h 401BOOTP_NFSROOT opt_bootp.h 402BOOTP_NFSV3 opt_bootp.h 403BOOTP_WIRED_TO opt_bootp.h 404DEVICE_POLLING 405DUMMYNET opt_ipdn.h 406INET opt_inet.h 407INET6 opt_inet6.h 408IPDIVERT 409IPFILTER opt_ipfilter.h 410IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 411IPFILTER_LOG opt_ipfilter.h 412IPFILTER_LOOKUP opt_ipfilter.h 413IPFIREWALL opt_ipfw.h 414IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 415IPFIREWALL_NAT opt_ipfw.h 416IPFIREWALL_VERBOSE opt_ipfw.h 417IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 418IPSEC opt_ipsec.h 419IPSEC_DEBUG opt_ipsec.h 420IPSEC_FILTERTUNNEL opt_ipsec.h 421IPSEC_NAT_T opt_ipsec.h 422IPSTEALTH 423KRPC 424LIBALIAS 425LIBMBPOOL 426LIBMCHAIN 427MBUF_PROFILING 428MBUF_STRESS_TEST 429MROUTING opt_mrouting.h 430NFSLOCKD 431PCBGROUP opt_pcbgroup.h 432PF_DEFAULT_TO_DROP opt_pf.h 433RADIX_MPATH opt_mpath.h 434ROUTETABLES opt_route.h 435RSS opt_rss.h 436SLIP_IFF_OPTS opt_slip.h 437TCPDEBUG 438SIFTR 439TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading 440TCP_SIGNATURE opt_inet.h 441VLAN_ARRAY opt_vlan.h 442XBONEHACK 443FLOWTABLE opt_route.h 444FLOWTABLE_HASH_ALL opt_route.h 445 446# 447# SCTP 448# 449SCTP opt_sctp.h 450SCTP_DEBUG opt_sctp.h # Enable debug printfs 451SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril 452SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 453SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 454SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 455SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 456SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 457SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 458SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 459SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 460SCTP_LOCAL_TRACE_BUF opt_sctp.h # Use tracebuffer exported via sysctl 461SCTP_DETAILED_STR_STATS opt_sctp.h # Use per PR-SCTP policy stream stats 462# 463# 464# 465 466# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 467# Each netgraph node type can be either be compiled into the kernel 468# or loaded dynamically. To get the former, include the corresponding 469# option below. Each type has its own man page, e.g. ng_async(4). 470NETGRAPH 471NETGRAPH_DEBUG opt_netgraph.h 472NETGRAPH_ASYNC opt_netgraph.h 473NETGRAPH_ATMLLC opt_netgraph.h 474NETGRAPH_ATM_ATMPIF opt_netgraph.h 475NETGRAPH_BLUETOOTH opt_netgraph.h 476NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 477NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 478NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 479NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 480NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 481NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 482NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 483NETGRAPH_BPF opt_netgraph.h 484NETGRAPH_BRIDGE opt_netgraph.h 485NETGRAPH_CAR opt_netgraph.h 486NETGRAPH_CISCO opt_netgraph.h 487NETGRAPH_DEFLATE opt_netgraph.h 488NETGRAPH_DEVICE opt_netgraph.h 489NETGRAPH_ECHO opt_netgraph.h 490NETGRAPH_EIFACE opt_netgraph.h 491NETGRAPH_ETHER opt_netgraph.h 492NETGRAPH_ETHER_ECHO opt_netgraph.h 493NETGRAPH_FEC opt_netgraph.h 494NETGRAPH_FRAME_RELAY opt_netgraph.h 495NETGRAPH_GIF opt_netgraph.h 496NETGRAPH_GIF_DEMUX opt_netgraph.h 497NETGRAPH_HOLE opt_netgraph.h 498NETGRAPH_IFACE opt_netgraph.h 499NETGRAPH_IP_INPUT opt_netgraph.h 500NETGRAPH_IPFW opt_netgraph.h 501NETGRAPH_KSOCKET opt_netgraph.h 502NETGRAPH_L2TP opt_netgraph.h 503NETGRAPH_LMI opt_netgraph.h 504# MPPC compression requires proprietary files (not included) 505NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 506NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 507NETGRAPH_NAT opt_netgraph.h 508NETGRAPH_NETFLOW opt_netgraph.h 509NETGRAPH_ONE2MANY opt_netgraph.h 510NETGRAPH_PATCH opt_netgraph.h 511NETGRAPH_PIPE opt_netgraph.h 512NETGRAPH_PPP opt_netgraph.h 513NETGRAPH_PPPOE opt_netgraph.h 514NETGRAPH_PPTPGRE opt_netgraph.h 515NETGRAPH_PRED1 opt_netgraph.h 516NETGRAPH_RFC1490 opt_netgraph.h 517NETGRAPH_SOCKET opt_netgraph.h 518NETGRAPH_SPLIT opt_netgraph.h 519NETGRAPH_SPPP opt_netgraph.h 520NETGRAPH_TAG opt_netgraph.h 521NETGRAPH_TCPMSS opt_netgraph.h 522NETGRAPH_TEE opt_netgraph.h 523NETGRAPH_TTY opt_netgraph.h 524NETGRAPH_UI opt_netgraph.h 525NETGRAPH_VJC opt_netgraph.h 526NETGRAPH_VLAN opt_netgraph.h 527 528# NgATM options 529NGATM_ATM opt_netgraph.h 530NGATM_ATMBASE opt_netgraph.h 531NGATM_SSCOP opt_netgraph.h 532NGATM_SSCFU opt_netgraph.h 533NGATM_UNI opt_netgraph.h 534NGATM_CCATM opt_netgraph.h 535 536# DRM options 537DRM_DEBUG opt_drm.h 538 539TI_SF_BUF_JUMBO opt_ti.h 540TI_JUMBO_HDRSPLIT opt_ti.h 541 542# XXX Conflict: # of devices vs network protocol (Native ATM). 543# This makes "atm.h" unusable. 544NATM 545 546# DPT driver debug flags 547DPT_MEASURE_PERFORMANCE opt_dpt.h 548DPT_RESET_HBA opt_dpt.h 549 550# Misc debug flags. Most of these should probably be replaced with 551# 'DEBUG', and then let people recompile just the interesting modules 552# with 'make CC="cc -DDEBUG"'. 553CLUSTERDEBUG opt_debug_cluster.h 554DEBUG_1284 opt_ppb_1284.h 555VP0_DEBUG opt_vpo.h 556LPT_DEBUG opt_lpt.h 557PLIP_DEBUG opt_plip.h 558LOCKF_DEBUG opt_debug_lockf.h 559SI_DEBUG opt_debug_si.h 560IFMEDIA_DEBUG opt_ifmedia.h 561 562# Fb options 563FB_DEBUG opt_fb.h 564FB_INSTALL_CDEV opt_fb.h 565 566# ppbus related options 567PERIPH_1284 opt_ppb_1284.h 568DONTPROBE_1284 opt_ppb_1284.h 569 570# smbus related options 571ENABLE_ALART opt_intpm.h 572 573# These cause changes all over the kernel 574BLKDEV_IOSIZE opt_global.h 575BURN_BRIDGES opt_global.h 576DEBUG opt_global.h 577DEBUG_LOCKS opt_global.h 578DEBUG_VFS_LOCKS opt_global.h 579DFLTPHYS opt_global.h 580DIAGNOSTIC opt_global.h 581INVARIANT_SUPPORT opt_global.h 582INVARIANTS opt_global.h 583MAXCPU opt_global.h 584MAXMEMDOM opt_global.h 585MAXPHYS opt_global.h 586MCLSHIFT opt_global.h 587MUTEX_DEBUG opt_global.h 588MUTEX_NOINLINE opt_global.h 589LOCK_PROFILING opt_global.h 590LOCK_PROFILING_FAST opt_global.h 591MSIZE opt_global.h 592REGRESSION opt_global.h 593RWLOCK_NOINLINE opt_global.h 594SX_NOINLINE opt_global.h 595VFS_BIO_DEBUG opt_global.h 596 597# These are VM related options 598VM_KMEM_SIZE opt_vm.h 599VM_KMEM_SIZE_SCALE opt_vm.h 600VM_KMEM_SIZE_MAX opt_vm.h 601VM_NRESERVLEVEL opt_vm.h 602VM_LEVEL_0_ORDER opt_vm.h 603NO_SWAPPING opt_vm.h 604MALLOC_MAKE_FAILURES opt_vm.h 605MALLOC_PROFILE opt_vm.h 606MALLOC_DEBUG_MAXZONES opt_vm.h 607 608# The MemGuard replacement allocator used for tamper-after-free detection 609DEBUG_MEMGUARD opt_vm.h 610 611# The RedZone malloc(9) protection 612DEBUG_REDZONE opt_vm.h 613 614# Standard SMP options 615SMP opt_global.h 616 617# Size of the kernel message buffer 618MSGBUF_SIZE opt_msgbuf.h 619 620# NFS options 621NFS_MINATTRTIMO opt_nfs.h 622NFS_MAXATTRTIMO opt_nfs.h 623NFS_MINDIRATTRTIMO opt_nfs.h 624NFS_MAXDIRATTRTIMO opt_nfs.h 625NFS_DEBUG opt_nfs.h 626 627# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 628OVERRIDE_CARD opt_bktr.h 629OVERRIDE_TUNER opt_bktr.h 630OVERRIDE_DBX opt_bktr.h 631OVERRIDE_MSP opt_bktr.h 632BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 633BROOKTREE_ALLOC_PAGES opt_bktr.h 634BKTR_OVERRIDE_CARD opt_bktr.h 635BKTR_OVERRIDE_TUNER opt_bktr.h 636BKTR_OVERRIDE_DBX opt_bktr.h 637BKTR_OVERRIDE_MSP opt_bktr.h 638BKTR_SYSTEM_DEFAULT opt_bktr.h 639BKTR_ALLOC_PAGES opt_bktr.h 640BKTR_USE_PLL opt_bktr.h 641BKTR_GPIO_ACCESS opt_bktr.h 642BKTR_NO_MSP_RESET opt_bktr.h 643BKTR_430_FX_MODE opt_bktr.h 644BKTR_SIS_VIA_MODE opt_bktr.h 645BKTR_USE_FREEBSD_SMBUS opt_bktr.h 646BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 647 648# Options for uart(4) 649UART_PPS_ON_CTS opt_uart.h 650UART_POLL_FREQ opt_uart.h 651 652# options for bus/device framework 653BUS_DEBUG opt_bus.h 654 655# options for USB support 656USB_DEBUG opt_usb.h 657USB_HOST_ALIGN opt_usb.h 658USB_REQ_DEBUG opt_usb.h 659USB_TEMPLATE opt_usb.h 660USB_VERBOSE opt_usb.h 661USB_DMA_SINGLE_ALLOC opt_usb.h 662USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 663U3G_DEBUG opt_u3g.h 664UKBD_DFLT_KEYMAP opt_ukbd.h 665UPLCOM_INTR_INTERVAL opt_uplcom.h 666UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 667UVSCOM_INTR_INTERVAL opt_uvscom.h 668 669# Embedded system options 670INIT_PATH 671 672ROOTDEVNAME 673 674FDC_DEBUG opt_fdc.h 675PCFCLOCK_VERBOSE opt_pcfclock.h 676PCFCLOCK_MAX_RETRIES opt_pcfclock.h 677 678KTR opt_global.h 679KTR_ALQ opt_ktr.h 680KTR_MASK opt_ktr.h 681KTR_CPUMASK opt_ktr.h 682KTR_COMPILE opt_global.h 683KTR_BOOT_ENTRIES opt_global.h 684KTR_ENTRIES opt_global.h 685KTR_VERBOSE opt_ktr.h 686WITNESS opt_global.h 687WITNESS_KDB opt_witness.h 688WITNESS_NO_VNODE opt_witness.h 689WITNESS_SKIPSPIN opt_witness.h 690WITNESS_COUNT opt_witness.h 691OPENSOLARIS_WITNESS opt_global.h 692 693# options for ACPI support 694ACPI_DEBUG opt_acpi.h 695ACPI_MAX_TASKS opt_acpi.h 696ACPI_MAX_THREADS opt_acpi.h 697ACPI_DMAR opt_acpi.h 698DEV_ACPI opt_acpi.h 699 700# ISA support 701DEV_ISA opt_isa.h 702ISAPNP opt_isa.h 703 704# various 'device presence' options. 705DEV_BPF opt_bpf.h 706DEV_CARP opt_carp.h 707DEV_ENC opt_enc.h 708DEV_MCA opt_mca.h 709DEV_NETMAP opt_global.h 710DEV_PCI opt_pci.h 711DEV_PF opt_pf.h 712DEV_PFLOG opt_pf.h 713DEV_PFSYNC opt_pf.h 714DEV_SPLASH opt_splash.h 715DEV_VLAN opt_vlan.h 716 717# EISA support 718DEV_EISA opt_eisa.h 719EISA_SLOTS opt_eisa.h 720 721# ed driver 722ED_HPP opt_ed.h 723ED_3C503 opt_ed.h 724ED_SIC opt_ed.h 725 726# bce driver 727BCE_DEBUG opt_bce.h 728BCE_NVRAM_WRITE_SUPPORT opt_bce.h 729 730SOCKBUF_DEBUG opt_global.h 731 732 733# options for ubsec driver 734UBSEC_DEBUG opt_ubsec.h 735UBSEC_RNDTEST opt_ubsec.h 736UBSEC_NO_RNG opt_ubsec.h 737 738# options for hifn driver 739HIFN_DEBUG opt_hifn.h 740HIFN_RNDTEST opt_hifn.h 741 742# options for safenet driver 743SAFE_DEBUG opt_safe.h 744SAFE_NO_RNG opt_safe.h 745SAFE_RNDTEST opt_safe.h 746 747# syscons/vt options 748MAXCONS opt_syscons.h 749SC_ALT_MOUSE_IMAGE opt_syscons.h 750SC_CUT_SPACES2TABS opt_syscons.h 751SC_CUT_SEPCHARS opt_syscons.h 752SC_DEBUG_LEVEL opt_syscons.h 753SC_DFLT_FONT opt_syscons.h 754SC_DISABLE_KDBKEY opt_syscons.h 755SC_DISABLE_REBOOT opt_syscons.h 756SC_HISTORY_SIZE opt_syscons.h 757SC_KERNEL_CONS_ATTR opt_syscons.h 758SC_KERNEL_CONS_REV_ATTR opt_syscons.h 759SC_MOUSE_CHAR opt_syscons.h 760SC_NO_CUTPASTE opt_syscons.h 761SC_NO_FONT_LOADING opt_syscons.h 762SC_NO_HISTORY opt_syscons.h 763SC_NO_MODE_CHANGE opt_syscons.h 764SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 765SC_NO_SYSMOUSE opt_syscons.h 766SC_NORM_ATTR opt_syscons.h 767SC_NORM_REV_ATTR opt_syscons.h 768SC_PIXEL_MODE opt_syscons.h 769SC_RENDER_DEBUG opt_syscons.h 770SC_TWOBUTTON_MOUSE opt_syscons.h 771VT_ALT_TO_ESC_HACK opt_syscons.h 772VT_FB_DEFAULT_WIDTH opt_syscons.h 773VT_FB_DEFAULT_HEIGHT opt_syscons.h 774VT_MAXWINDOWS opt_syscons.h 775VT_TWOBUTTON_MOUSE opt_syscons.h 776DEV_SC opt_syscons.h 777DEV_VT opt_syscons.h 778 779# teken terminal emulator options 780TEKEN_CONS25 opt_teken.h 781TEKEN_UTF8 opt_teken.h 782TERMINAL_KERN_ATTR opt_teken.h 783TERMINAL_NORM_ATTR opt_teken.h 784 785# options for printf 786PRINTF_BUFR_SIZE opt_printf.h 787 788# kbd options 789KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 790KBD_INSTALL_CDEV opt_kbd.h 791KBD_MAXRETRY opt_kbd.h 792KBD_MAXWAIT opt_kbd.h 793KBD_RESETDELAY opt_kbd.h 794KBDIO_DEBUG opt_kbd.h 795 796# options for the Atheros driver 797ATH_DEBUG opt_ath.h 798ATH_TXBUF opt_ath.h 799ATH_RXBUF opt_ath.h 800ATH_DIAGAPI opt_ath.h 801ATH_TX99_DIAG opt_ath.h 802ATH_ENABLE_11N opt_ath.h 803ATH_ENABLE_DFS opt_ath.h 804ATH_EEPROM_FIRMWARE opt_ath.h 805ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 806ATH_DEBUG_ALQ opt_ath.h 807ATH_KTR_INTR_DEBUG opt_ath.h 808 809# options for the Atheros hal 810AH_SUPPORT_AR5416 opt_ah.h 811# XXX For now, this breaks non-AR9130 chipsets, so only use it 812# XXX when actually targetting AR9130. 813AH_SUPPORT_AR9130 opt_ah.h 814 815# This is required for AR933x SoC support 816AH_SUPPORT_AR9330 opt_ah.h 817AH_SUPPORT_AR9340 opt_ah.h 818AH_SUPPORT_QCA9550 opt_ah.h 819 820AH_DEBUG opt_ah.h 821AH_ASSERT opt_ah.h 822AH_DEBUG_ALQ opt_ah.h 823AH_REGOPS_FUNC opt_ah.h 824AH_WRITE_REGDOMAIN opt_ah.h 825AH_DEBUG_COUNTRY opt_ah.h 826AH_WRITE_EEPROM opt_ah.h 827AH_PRIVATE_DIAG opt_ah.h 828AH_NEED_DESC_SWAP opt_ah.h 829AH_USE_INIPDGAIN opt_ah.h 830AH_MAXCHAN opt_ah.h 831AH_RXCFG_SDMAMW_4BYTES opt_ah.h 832AH_INTERRUPT_DEBUGGING opt_ah.h 833# AR5416 and later interrupt mitigation 834# XXX do not use this for AR9130 835AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 836 837# options for the Broadcom BCM43xx driver (bwi) 838BWI_DEBUG opt_bwi.h 839BWI_DEBUG_VERBOSE opt_bwi.h 840 841# options for the Marvell 8335 wireless driver 842MALO_DEBUG opt_malo.h 843MALO_TXBUF opt_malo.h 844MALO_RXBUF opt_malo.h 845 846# options for the Marvell wireless driver 847MWL_DEBUG opt_mwl.h 848MWL_TXBUF opt_mwl.h 849MWL_RXBUF opt_mwl.h 850MWL_DIAGAPI opt_mwl.h 851MWL_AGGR_SIZE opt_mwl.h 852MWL_TX_NODROP opt_mwl.h 853 854# Options for the Intel 802.11n wireless driver 855IWN_DEBUG opt_iwn.h 856 857# Options for the Intel 3945ABG wireless driver 858WPI_DEBUG opt_wpi.h 859 860# dcons options 861DCONS_BUF_SIZE opt_dcons.h 862DCONS_POLL_HZ opt_dcons.h 863DCONS_FORCE_CONSOLE opt_dcons.h 864DCONS_FORCE_GDB opt_dcons.h 865 866# HWPMC options 867HWPMC_DEBUG opt_global.h 868HWPMC_HOOKS 869HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h 870 871# XBOX options for FreeBSD/i386, but some files are MI 872XBOX opt_xbox.h 873 874# Interrupt filtering 875INTR_FILTER 876 877# 802.11 support layer 878IEEE80211_DEBUG opt_wlan.h 879IEEE80211_DEBUG_REFCNT opt_wlan.h 880IEEE80211_AMPDU_AGE opt_wlan.h 881IEEE80211_SUPPORT_MESH opt_wlan.h 882IEEE80211_SUPPORT_SUPERG opt_wlan.h 883IEEE80211_SUPPORT_TDMA opt_wlan.h 884IEEE80211_ALQ opt_wlan.h 885IEEE80211_DFS_DEBUG opt_wlan.h 886 887# 802.11 TDMA support 888TDMA_SLOTLEN_DEFAULT opt_tdma.h 889TDMA_SLOTCNT_DEFAULT opt_tdma.h 890TDMA_BINTVAL_DEFAULT opt_tdma.h 891TDMA_TXRATE_11B_DEFAULT opt_tdma.h 892TDMA_TXRATE_11G_DEFAULT opt_tdma.h 893TDMA_TXRATE_11A_DEFAULT opt_tdma.h 894TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 895TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 896TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 897TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 898TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 899 900# VideoMode 901PICKMODE_DEBUG opt_videomode.h 902 903# Network stack virtualization options 904VIMAGE opt_global.h 905VNET_DEBUG opt_global.h 906 907# Common Flash Interface (CFI) options 908CFI_SUPPORT_STRATAFLASH opt_cfi.h 909CFI_ARMEDANDDANGEROUS opt_cfi.h 910 911# Sound options 912SND_DEBUG opt_snd.h 913SND_DIAGNOSTIC opt_snd.h 914SND_FEEDER_MULTIFORMAT opt_snd.h 915SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 916SND_FEEDER_RATE_HP opt_snd.h 917SND_PCM_64 opt_snd.h 918SND_OLDSTEREO opt_snd.h 919 920X86BIOS 921 922# Flattened device tree options 923FDT opt_platform.h 924FDT_DTB_STATIC opt_platform.h 925 926# OFED Infiniband stack 927OFED opt_ofed.h 928OFED_DEBUG_INIT opt_ofed.h 929SDP opt_ofed.h 930SDP_DEBUG opt_ofed.h 931IPOIB opt_ofed.h 932IPOIB_DEBUG opt_ofed.h 933IPOIB_CM opt_ofed.h 934 935# Resource Accounting 936RACCT opt_global.h 937RACCT_DEFAULT_TO_DISABLED opt_global.h 938 939# Resource Limits 940RCTL opt_global.h 941 942# Random number generator(s) 943# The DEBUG option is in global.h as the random harvesting 944# puts probes all over the place, and it makes little sense 945# to pollute these headers with an extra include. 946# the DUMMY option is in global.h because it is used to 947# turn off harvesting all over the kernel. 948RANDOM_DEBUG opt_global.h 949# Which CSPRNG hashes we get. 950# These are mutually exclusive. With neither, Fortuna is selected. 951RANDOM_DUMMY opt_global.h 952RANDOM_YARROW opt_random.h 953 954# Intel em(4) driver 955EM_MULTIQUEUE opt_em.h 956