xref: /freebsd/sys/conf/options (revision d9f0ce31900a48d1a2bfc1c8c86f79d1e831451a)
1# $FreeBSD$
2#
3#        On the handling of kernel options
4#
5# All kernel options should be listed in NOTES, with suitable
6# descriptions.  Negative options (options that make some code not
7# compile) should be commented out; LINT (generated from NOTES) should
8# compile as much code as possible.  Try to structure option-using
9# code so that a single option only switch code on, or only switch
10# code off, to make it possible to have a full compile-test.  If
11# necessary, you can check for COMPILING_LINT to get maximum code
12# coverage.
13#
14# All new options shall also be listed in either "conf/options" or
15# "conf/options.<machine>".  Options that affect a single source-file
16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17# that affect multiple files should either go in "opt_global.h" if
18# this is a kernel-wide option (used just about everywhere), or in
19# "opt_<option-name-in-lower-case>.h" if it affects only some files.
20# Note that the effect of listing only an option without a
21# header-file-name in conf/options (and cousins) is that the last
22# convention is followed.
23#
24# This handling scheme is not yet fully implemented.
25#
26#
27# Format of this file:
28# Option name	filename
29#
30# If filename is missing, the default is
31# opt_<name-of-option-in-lower-case>.h
32
33AAC_DEBUG		opt_aac.h
34AACRAID_DEBUG		opt_aacraid.h
35AHC_ALLOW_MEMIO		opt_aic7xxx.h
36AHC_TMODE_ENABLE	opt_aic7xxx.h
37AHC_DUMP_EEPROM		opt_aic7xxx.h
38AHC_DEBUG		opt_aic7xxx.h
39AHC_DEBUG_OPTS		opt_aic7xxx.h
40AHC_REG_PRETTY_PRINT	opt_aic7xxx.h
41AHD_DEBUG		opt_aic79xx.h
42AHD_DEBUG_OPTS		opt_aic79xx.h
43AHD_TMODE_ENABLE	opt_aic79xx.h
44AHD_REG_PRETTY_PRINT	opt_aic79xx.h
45ADW_ALLOW_MEMIO		opt_adw.h
46
47TWA_DEBUG		opt_twa.h
48TWA_FLASH_FIRMWARE	opt_twa.h
49
50# Debugging options.
51ALT_BREAK_TO_DEBUGGER	opt_kdb.h
52BREAK_TO_DEBUGGER	opt_kdb.h
53DDB
54DDB_BUFR_SIZE	opt_ddb.h
55DDB_CAPTURE_DEFAULTBUFSIZE	opt_ddb.h
56DDB_CAPTURE_MAXBUFSIZE	opt_ddb.h
57DDB_CTF		opt_ddb.h
58DDB_NUMSYM	opt_ddb.h
59GDB
60KDB		opt_global.h
61KDB_TRACE	opt_kdb.h
62KDB_UNATTENDED	opt_kdb.h
63KLD_DEBUG	opt_kld.h
64SYSCTL_DEBUG	opt_sysctl.h
65EARLY_PRINTF	opt_global.h
66TEXTDUMP_PREFERRED	opt_ddb.h
67TEXTDUMP_VERBOSE	opt_ddb.h
68
69# Miscellaneous options.
70ADAPTIVE_LOCKMGRS
71ALQ
72ALTERA_SDCARD_FAST_SIM	opt_altera_sdcard.h
73ATSE_CFI_HACK	opt_cfi.h
74AUDIT		opt_global.h
75BOOTHOWTO	opt_global.h
76BOOTVERBOSE	opt_global.h
77CALLOUT_PROFILING
78CAPABILITIES	opt_capsicum.h
79CAPABILITY_MODE	opt_capsicum.h
80COMPAT_43	opt_compat.h
81COMPAT_43TTY	opt_compat.h
82COMPAT_FREEBSD4	opt_compat.h
83COMPAT_FREEBSD5	opt_compat.h
84COMPAT_FREEBSD6	opt_compat.h
85COMPAT_FREEBSD7	opt_compat.h
86COMPAT_FREEBSD9	opt_compat.h
87COMPAT_FREEBSD10	opt_compat.h
88COMPAT_CLOUDABI64	opt_dontuse.h
89COMPAT_LINUXKPI	opt_compat.h
90COMPILING_LINT	opt_global.h
91CY_PCI_FASTINTR
92DEADLKRES	opt_watchdog.h
93DEVICE_NUMA
94EXT_RESOURCES	opt_global.h
95DIRECTIO
96FILEMON		opt_dontuse.h
97FFCLOCK
98FULL_PREEMPTION	opt_sched.h
99GZIO		opt_gzio.h
100IMAGACT_BINMISC		opt_dontuse.h
101IPI_PREEMPTION	opt_sched.h
102GEOM_AES	opt_geom.h
103GEOM_BDE	opt_geom.h
104GEOM_BSD	opt_geom.h
105GEOM_CACHE	opt_geom.h
106GEOM_CONCAT	opt_geom.h
107GEOM_ELI	opt_geom.h
108GEOM_FOX	opt_geom.h
109GEOM_GATE	opt_geom.h
110GEOM_JOURNAL	opt_geom.h
111GEOM_LABEL	opt_geom.h
112GEOM_LABEL_GPT	opt_geom.h
113GEOM_LINUX_LVM	opt_geom.h
114GEOM_MAP	opt_geom.h
115GEOM_MBR	opt_geom.h
116GEOM_MIRROR	opt_geom.h
117GEOM_MOUNTVER	opt_geom.h
118GEOM_MULTIPATH	opt_geom.h
119GEOM_NOP	opt_geom.h
120GEOM_PART_APM	opt_geom.h
121GEOM_PART_BSD	opt_geom.h
122GEOM_PART_BSD64	opt_geom.h
123GEOM_PART_EBR	opt_geom.h
124GEOM_PART_EBR_COMPAT	opt_geom.h
125GEOM_PART_GPT	opt_geom.h
126GEOM_PART_LDM	opt_geom.h
127GEOM_PART_MBR	opt_geom.h
128GEOM_PART_PC98	opt_geom.h
129GEOM_PART_VTOC8	opt_geom.h
130GEOM_PC98	opt_geom.h
131GEOM_RAID	opt_geom.h
132GEOM_RAID3	opt_geom.h
133GEOM_SHSEC	opt_geom.h
134GEOM_STRIPE	opt_geom.h
135GEOM_SUNLABEL	opt_geom.h
136GEOM_UZIP	opt_geom.h
137GEOM_UZIP_DEBUG	opt_geom.h
138GEOM_VINUM	opt_geom.h
139GEOM_VIRSTOR	opt_geom.h
140GEOM_VOL	opt_geom.h
141GEOM_ZERO	opt_geom.h
142KDTRACE_HOOKS	opt_global.h
143KDTRACE_FRAME	opt_kdtrace.h
144KN_HASHSIZE	opt_kqueue.h
145KSTACK_MAX_PAGES
146KSTACK_PAGES
147KSTACK_USAGE_PROF
148KTRACE
149KTRACE_REQUEST_POOL	opt_ktrace.h
150LIBICONV
151MAC		opt_global.h
152MAC_BIBA	opt_dontuse.h
153MAC_BSDEXTENDED	opt_dontuse.h
154MAC_IFOFF	opt_dontuse.h
155MAC_LOMAC	opt_dontuse.h
156MAC_MLS		opt_dontuse.h
157MAC_NONE	opt_dontuse.h
158MAC_PARTITION	opt_dontuse.h
159MAC_PORTACL	opt_dontuse.h
160MAC_SEEOTHERUIDS	opt_dontuse.h
161MAC_STATIC	opt_mac.h
162MAC_STUB	opt_dontuse.h
163MAC_TEST	opt_dontuse.h
164MD_ROOT		opt_md.h
165MD_ROOT_FSTYPE	opt_md.h
166MD_ROOT_SIZE	opt_md.h
167MFI_DEBUG	opt_mfi.h
168MFI_DECODE_LOG	opt_mfi.h
169MPROF_BUFFERS	opt_mprof.h
170MPROF_HASH_SIZE	opt_mprof.h
171NEW_PCIB	opt_global.h
172NO_ADAPTIVE_MUTEXES	opt_adaptive_mutexes.h
173NO_ADAPTIVE_RWLOCKS
174NO_ADAPTIVE_SX
175NO_EVENTTIMERS		opt_timer.h
176NO_SYSCTL_DESCR	opt_global.h
177NSWBUF_MIN	opt_swap.h
178MBUF_PACKET_ZONE_DISABLE	opt_global.h
179PANIC_REBOOT_WAIT_TIME	opt_panic.h
180PCI_IOV		opt_global.h
181PPC_DEBUG	opt_ppc.h
182PPC_PROBE_CHIPSET	opt_ppc.h
183PPS_SYNC	opt_ntp.h
184PREEMPTION	opt_sched.h
185QUOTA
186SCHED_4BSD	opt_sched.h
187SCHED_STATS	opt_sched.h
188SCHED_ULE	opt_sched.h
189SLEEPQUEUE_PROFILING
190SLHCI_DEBUG	opt_slhci.h
191SPX_HACK
192STACK		opt_stack.h
193SUIDDIR
194MSGMNB		opt_sysvipc.h
195MSGMNI		opt_sysvipc.h
196MSGSEG		opt_sysvipc.h
197MSGSSZ		opt_sysvipc.h
198MSGTQL		opt_sysvipc.h
199SEMMNI		opt_sysvipc.h
200SEMMNS		opt_sysvipc.h
201SEMMNU		opt_sysvipc.h
202SEMMSL		opt_sysvipc.h
203SEMOPM		opt_sysvipc.h
204SEMUME		opt_sysvipc.h
205SHMALL		opt_sysvipc.h
206SHMMAX		opt_sysvipc.h
207SHMMAXPGS	opt_sysvipc.h
208SHMMIN		opt_sysvipc.h
209SHMMNI		opt_sysvipc.h
210SHMSEG		opt_sysvipc.h
211SYSVMSG		opt_sysvipc.h
212SYSVSEM		opt_sysvipc.h
213SYSVSHM		opt_sysvipc.h
214SW_WATCHDOG	opt_watchdog.h
215TURNSTILE_PROFILING
216UMTX_PROFILING
217VERBOSE_SYSINIT
218WLCACHE		opt_wavelan.h
219WLDEBUG		opt_wavelan.h
220
221# POSIX kernel options
222P1003_1B_MQUEUE			opt_posix.h
223P1003_1B_SEMAPHORES		opt_posix.h
224_KPOSIX_PRIORITY_SCHEDULING	opt_posix.h
225
226# Do we want the config file compiled into the kernel?
227INCLUDE_CONFIG_FILE	opt_config.h
228
229# Options for static filesystems.  These should only be used at config
230# time, since the corresponding lkms cannot work if there are any static
231# dependencies.  Unusability is enforced by hiding the defines for the
232# options in a never-included header.
233AUTOFS		opt_dontuse.h
234CD9660		opt_dontuse.h
235EXT2FS		opt_dontuse.h
236FDESCFS		opt_dontuse.h
237FFS		opt_dontuse.h
238FUSE		opt_dontuse.h
239MSDOSFS		opt_dontuse.h
240NANDFS		opt_dontuse.h
241NULLFS		opt_dontuse.h
242PROCFS		opt_dontuse.h
243PSEUDOFS	opt_dontuse.h
244REISERFS	opt_dontuse.h
245SMBFS		opt_dontuse.h
246TMPFS		opt_dontuse.h
247UDF		opt_dontuse.h
248UNIONFS		opt_dontuse.h
249ZFS		opt_dontuse.h
250
251# Pseudofs debugging
252PSEUDOFS_TRACE	opt_pseudofs.h
253
254# In-kernel GSS-API
255KGSSAPI		opt_kgssapi.h
256KGSSAPI_DEBUG	opt_kgssapi.h
257
258# These static filesystems have one slightly bogus static dependency in
259# sys/i386/i386/autoconf.c.  If any of these filesystems are
260# statically compiled into the kernel, code for mounting them as root
261# filesystems will be enabled - but look below.
262# NFSCL - client
263# NFSD - server
264NFSCL		opt_nfs.h
265NFSD		opt_nfs.h
266
267# filesystems and libiconv bridge
268CD9660_ICONV	opt_dontuse.h
269MSDOSFS_ICONV	opt_dontuse.h
270UDF_ICONV	opt_dontuse.h
271
272# If you are following the conditions in the copyright,
273# you can enable soft-updates which will speed up a lot of thigs
274# and make the system safer from crashes at the same time.
275# otherwise a STUB module will be compiled in.
276SOFTUPDATES	opt_ffs.h
277
278# On small, embedded systems, it can be useful to turn off support for
279# snapshots.  It saves about 30-40k for a feature that would be lightly
280# used, if it is used at all.
281NO_FFS_SNAPSHOT	opt_ffs.h
282
283# Enabling this option turns on support for Access Control Lists in UFS,
284# which can be used to support high security configurations.  Depends on
285# UFS_EXTATTR.
286UFS_ACL		opt_ufs.h
287
288# Enabling this option turns on support for extended attributes in UFS-based
289# filesystems, which can be used to support high security configurations
290# as well as new filesystem features.
291UFS_EXTATTR	opt_ufs.h
292UFS_EXTATTR_AUTOSTART	opt_ufs.h
293
294# Enable fast hash lookups for large directories on UFS-based filesystems.
295UFS_DIRHASH	opt_ufs.h
296
297# Enable gjournal-based UFS journal.
298UFS_GJOURNAL	opt_ufs.h
299
300# The below sentence is not in English, and neither is this one.
301# We plan to remove the static dependences above, with a
302# <filesystem>_ROOT option to control if it usable as root.  This list
303# allows these options to be present in config files already (though
304# they won't make any difference yet).
305NFS_ROOT	opt_nfsroot.h
306
307# SMB/CIFS requester
308NETSMB		opt_netsmb.h
309
310# Options used only in subr_param.c.
311HZ		opt_param.h
312MAXFILES	opt_param.h
313NBUF		opt_param.h
314NSFBUFS		opt_param.h
315VM_BCACHE_SIZE_MAX	opt_param.h
316VM_SWZONE_SIZE_MAX	opt_param.h
317MAXUSERS
318DFLDSIZ		opt_param.h
319MAXDSIZ		opt_param.h
320MAXSSIZ		opt_param.h
321
322# Generic SCSI options.
323CAM_MAX_HIGHPOWER	opt_cam.h
324CAMDEBUG		opt_cam.h
325CAM_DEBUG_COMPILE	opt_cam.h
326CAM_DEBUG_DELAY		opt_cam.h
327CAM_DEBUG_BUS		opt_cam.h
328CAM_DEBUG_TARGET	opt_cam.h
329CAM_DEBUG_LUN		opt_cam.h
330CAM_DEBUG_FLAGS		opt_cam.h
331CAM_BOOT_DELAY		opt_cam.h
332CAM_NETFLIX_IOSCHED	opt_cam.h
333SCSI_DELAY		opt_scsi.h
334SCSI_NO_SENSE_STRINGS	opt_scsi.h
335SCSI_NO_OP_STRINGS	opt_scsi.h
336
337# Options used only in cam/ata/ata_da.c
338ADA_TEST_FAILURE	opt_ada.h
339ATA_STATIC_ID		opt_ada.h
340
341# Options used only in cam/scsi/scsi_cd.c
342CHANGER_MIN_BUSY_SECONDS	opt_cd.h
343CHANGER_MAX_BUSY_SECONDS	opt_cd.h
344
345# Options used only in cam/scsi/scsi_sa.c.
346SA_IO_TIMEOUT		opt_sa.h
347SA_SPACE_TIMEOUT	opt_sa.h
348SA_REWIND_TIMEOUT	opt_sa.h
349SA_ERASE_TIMEOUT	opt_sa.h
350SA_1FM_AT_EOD		opt_sa.h
351
352# Options used only in cam/scsi/scsi_pt.c
353SCSI_PT_DEFAULT_TIMEOUT	opt_pt.h
354
355# Options used only in cam/scsi/scsi_ses.c
356SES_ENABLE_PASSTHROUGH	opt_ses.h
357
358# Options used in dev/sym/ (Symbios SCSI driver).
359SYM_SETUP_LP_PROBE_MAP	opt_sym.h	#-Low Priority Probe Map (bits)
360					# Allows the ncr to take precedence
361					# 1 (1<<0) -> 810a, 860
362					# 2 (1<<1) -> 825a, 875, 885, 895
363					# 4 (1<<2) -> 895a, 896, 1510d
364SYM_SETUP_SCSI_DIFF	opt_sym.h	#-HVD support for 825a, 875, 885
365					# disabled:0 (default), enabled:1
366SYM_SETUP_PCI_PARITY	opt_sym.h	#-PCI parity checking
367					# disabled:0, enabled:1 (default)
368SYM_SETUP_MAX_LUN	opt_sym.h	#-Number of LUNs supported
369					# default:8, range:[1..64]
370
371# Options used only in dev/ncr/*
372SCSI_NCR_DEBUG		opt_ncr.h
373SCSI_NCR_MAX_SYNC	opt_ncr.h
374SCSI_NCR_MAX_WIDE	opt_ncr.h
375SCSI_NCR_MYADDR		opt_ncr.h
376
377# Options used only in dev/isp/*
378ISP_TARGET_MODE		opt_isp.h
379ISP_FW_CRASH_DUMP	opt_isp.h
380ISP_DEFAULT_ROLES	opt_isp.h
381ISP_INTERNAL_TARGET	opt_isp.h
382
383# Options used only in dev/iscsi
384ISCSI_INITIATOR_DEBUG	opt_iscsi_initiator.h
385
386# Net stuff.
387ACCEPT_FILTER_DATA
388ACCEPT_FILTER_DNS
389ACCEPT_FILTER_HTTP
390ALTQ			opt_global.h
391ALTQ_CBQ		opt_altq.h
392ALTQ_CDNR		opt_altq.h
393ALTQ_CODEL		opt_altq.h
394ALTQ_DEBUG		opt_altq.h
395ALTQ_HFSC		opt_altq.h
396ALTQ_FAIRQ		opt_altq.h
397ALTQ_NOPCC		opt_altq.h
398ALTQ_PRIQ		opt_altq.h
399ALTQ_RED		opt_altq.h
400ALTQ_RIO		opt_altq.h
401BOOTP			opt_bootp.h
402BOOTP_BLOCKSIZE		opt_bootp.h
403BOOTP_COMPAT		opt_bootp.h
404BOOTP_NFSROOT		opt_bootp.h
405BOOTP_NFSV3		opt_bootp.h
406BOOTP_WIRED_TO		opt_bootp.h
407DEVICE_POLLING
408DUMMYNET		opt_ipdn.h
409INET			opt_inet.h
410INET6			opt_inet6.h
411IPDIVERT
412IPFILTER		opt_ipfilter.h
413IPFILTER_DEFAULT_BLOCK	opt_ipfilter.h
414IPFILTER_LOG		opt_ipfilter.h
415IPFILTER_LOOKUP		opt_ipfilter.h
416IPFIREWALL		opt_ipfw.h
417IPFIREWALL_DEFAULT_TO_ACCEPT	opt_ipfw.h
418IPFIREWALL_NAT		opt_ipfw.h
419IPFIREWALL_VERBOSE	opt_ipfw.h
420IPFIREWALL_VERBOSE_LIMIT	opt_ipfw.h
421IPSEC			opt_ipsec.h
422IPSEC_DEBUG		opt_ipsec.h
423IPSEC_FILTERTUNNEL	opt_ipsec.h
424IPSEC_NAT_T		opt_ipsec.h
425IPSTEALTH
426KRPC
427LIBALIAS
428LIBMBPOOL
429LIBMCHAIN
430MBUF_PROFILING
431MBUF_STRESS_TEST
432MROUTING		opt_mrouting.h
433NFSLOCKD
434PCBGROUP		opt_pcbgroup.h
435PF_DEFAULT_TO_DROP	opt_pf.h
436RADIX_MPATH		opt_mpath.h
437ROUTETABLES		opt_route.h
438RSS			opt_rss.h
439SLIP_IFF_OPTS		opt_slip.h
440TCPDEBUG
441TCPPCAP		opt_global.h
442SIFTR
443TCP_OFFLOAD		opt_inet.h # Enable code to dispatch TCP offloading
444TCP_RFC7413		opt_inet.h
445TCP_RFC7413_MAX_KEYS	opt_inet.h
446TCP_SIGNATURE		opt_inet.h
447VLAN_ARRAY		opt_vlan.h
448XBONEHACK
449FLOWTABLE		opt_route.h
450FLOWTABLE_HASH_ALL	opt_route.h
451
452#
453# SCTP
454#
455SCTP			opt_sctp.h
456SCTP_DEBUG		opt_sctp.h # Enable debug printfs
457SCTP_WITH_NO_CSUM	opt_sctp.h # Use this at your peril
458SCTP_LOCK_LOGGING	opt_sctp.h # Log to KTR lock activity
459SCTP_MBUF_LOGGING	opt_sctp.h # Log to KTR general mbuf aloc/free
460SCTP_MBCNT_LOGGING	opt_sctp.h # Log to KTR mbcnt activity
461SCTP_PACKET_LOGGING	opt_sctp.h # Log to a packet buffer last N packets
462SCTP_LTRACE_CHUNKS	opt_sctp.h # Log to KTR chunks processed
463SCTP_LTRACE_ERRORS	opt_sctp.h # Log to KTR error returns.
464SCTP_USE_PERCPU_STAT	opt_sctp.h # Use per cpu stats.
465SCTP_MCORE_INPUT	opt_sctp.h # Have multiple input threads for input mbufs
466SCTP_LOCAL_TRACE_BUF	opt_sctp.h # Use tracebuffer exported via sysctl
467SCTP_DETAILED_STR_STATS	opt_sctp.h # Use per PR-SCTP policy stream stats
468#
469#
470#
471
472# Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
473# Each netgraph node type can be either be compiled into the kernel
474# or loaded dynamically. To get the former, include the corresponding
475# option below. Each type has its own man page, e.g. ng_async(4).
476NETGRAPH
477NETGRAPH_DEBUG		opt_netgraph.h
478NETGRAPH_ASYNC		opt_netgraph.h
479NETGRAPH_ATMLLC		opt_netgraph.h
480NETGRAPH_ATM_ATMPIF	opt_netgraph.h
481NETGRAPH_BLUETOOTH	opt_netgraph.h
482NETGRAPH_BLUETOOTH_BT3C	opt_netgraph.h
483NETGRAPH_BLUETOOTH_H4	opt_netgraph.h
484NETGRAPH_BLUETOOTH_HCI	opt_netgraph.h
485NETGRAPH_BLUETOOTH_L2CAP	opt_netgraph.h
486NETGRAPH_BLUETOOTH_SOCKET	opt_netgraph.h
487NETGRAPH_BLUETOOTH_UBT	opt_netgraph.h
488NETGRAPH_BLUETOOTH_UBTBCMFW	opt_netgraph.h
489NETGRAPH_BPF		opt_netgraph.h
490NETGRAPH_BRIDGE		opt_netgraph.h
491NETGRAPH_CAR		opt_netgraph.h
492NETGRAPH_CISCO		opt_netgraph.h
493NETGRAPH_DEFLATE	opt_netgraph.h
494NETGRAPH_DEVICE		opt_netgraph.h
495NETGRAPH_ECHO		opt_netgraph.h
496NETGRAPH_EIFACE		opt_netgraph.h
497NETGRAPH_ETHER		opt_netgraph.h
498NETGRAPH_ETHER_ECHO	opt_netgraph.h
499NETGRAPH_FEC		opt_netgraph.h
500NETGRAPH_FRAME_RELAY	opt_netgraph.h
501NETGRAPH_GIF		opt_netgraph.h
502NETGRAPH_GIF_DEMUX	opt_netgraph.h
503NETGRAPH_HOLE		opt_netgraph.h
504NETGRAPH_IFACE		opt_netgraph.h
505NETGRAPH_IP_INPUT	opt_netgraph.h
506NETGRAPH_IPFW		opt_netgraph.h
507NETGRAPH_KSOCKET	opt_netgraph.h
508NETGRAPH_L2TP		opt_netgraph.h
509NETGRAPH_LMI		opt_netgraph.h
510# MPPC compression requires proprietary files (not included)
511NETGRAPH_MPPC_COMPRESSION	opt_netgraph.h
512NETGRAPH_MPPC_ENCRYPTION	opt_netgraph.h
513NETGRAPH_NAT		opt_netgraph.h
514NETGRAPH_NETFLOW	opt_netgraph.h
515NETGRAPH_ONE2MANY	opt_netgraph.h
516NETGRAPH_PATCH		opt_netgraph.h
517NETGRAPH_PIPE		opt_netgraph.h
518NETGRAPH_PPP		opt_netgraph.h
519NETGRAPH_PPPOE		opt_netgraph.h
520NETGRAPH_PPTPGRE	opt_netgraph.h
521NETGRAPH_PRED1		opt_netgraph.h
522NETGRAPH_RFC1490	opt_netgraph.h
523NETGRAPH_SOCKET		opt_netgraph.h
524NETGRAPH_SPLIT		opt_netgraph.h
525NETGRAPH_SPPP		opt_netgraph.h
526NETGRAPH_TAG		opt_netgraph.h
527NETGRAPH_TCPMSS		opt_netgraph.h
528NETGRAPH_TEE		opt_netgraph.h
529NETGRAPH_TTY		opt_netgraph.h
530NETGRAPH_UI		opt_netgraph.h
531NETGRAPH_VJC		opt_netgraph.h
532NETGRAPH_VLAN		opt_netgraph.h
533
534# NgATM options
535NGATM_ATM		opt_netgraph.h
536NGATM_ATMBASE		opt_netgraph.h
537NGATM_SSCOP		opt_netgraph.h
538NGATM_SSCFU		opt_netgraph.h
539NGATM_UNI		opt_netgraph.h
540NGATM_CCATM		opt_netgraph.h
541
542# DRM options
543DRM_DEBUG		opt_drm.h
544
545TI_SF_BUF_JUMBO		opt_ti.h
546TI_JUMBO_HDRSPLIT	opt_ti.h
547
548# XXX Conflict: # of devices vs network protocol (Native ATM).
549# This makes "atm.h" unusable.
550NATM
551
552# DPT driver debug flags
553DPT_MEASURE_PERFORMANCE	opt_dpt.h
554DPT_RESET_HBA		opt_dpt.h
555
556# Misc debug flags.  Most of these should probably be replaced with
557# 'DEBUG', and then let people recompile just the interesting modules
558# with 'make CC="cc -DDEBUG"'.
559CLUSTERDEBUG		opt_debug_cluster.h
560DEBUG_1284		opt_ppb_1284.h
561VP0_DEBUG		opt_vpo.h
562LPT_DEBUG		opt_lpt.h
563PLIP_DEBUG		opt_plip.h
564LOCKF_DEBUG		opt_debug_lockf.h
565SI_DEBUG		opt_debug_si.h
566IFMEDIA_DEBUG		opt_ifmedia.h
567
568# Fb options
569FB_DEBUG		opt_fb.h
570FB_INSTALL_CDEV		opt_fb.h
571
572# ppbus related options
573PERIPH_1284		opt_ppb_1284.h
574DONTPROBE_1284		opt_ppb_1284.h
575
576# smbus related options
577ENABLE_ALART		opt_intpm.h
578
579# These cause changes all over the kernel
580BLKDEV_IOSIZE		opt_global.h
581BURN_BRIDGES		opt_global.h
582DEBUG			opt_global.h
583DEBUG_LOCKS		opt_global.h
584DEBUG_VFS_LOCKS		opt_global.h
585DFLTPHYS		opt_global.h
586DIAGNOSTIC		opt_global.h
587INVARIANT_SUPPORT	opt_global.h
588INVARIANTS		opt_global.h
589MAXCPU			opt_global.h
590MAXMEMDOM		opt_global.h
591MAXPHYS			opt_global.h
592MCLSHIFT		opt_global.h
593MUTEX_DEBUG		opt_global.h
594MUTEX_NOINLINE		opt_global.h
595LOCK_PROFILING		opt_global.h
596LOCK_PROFILING_FAST	opt_global.h
597MSIZE			opt_global.h
598REGRESSION		opt_global.h
599RWLOCK_NOINLINE		opt_global.h
600SX_NOINLINE		opt_global.h
601VFS_BIO_DEBUG		opt_global.h
602
603# These are VM related options
604VM_KMEM_SIZE		opt_vm.h
605VM_KMEM_SIZE_SCALE	opt_vm.h
606VM_KMEM_SIZE_MAX	opt_vm.h
607VM_NRESERVLEVEL		opt_vm.h
608VM_NUMA_ALLOC		opt_vm.h
609VM_LEVEL_0_ORDER	opt_vm.h
610NO_SWAPPING		opt_vm.h
611MALLOC_MAKE_FAILURES	opt_vm.h
612MALLOC_PROFILE		opt_vm.h
613MALLOC_DEBUG_MAXZONES	opt_vm.h
614
615# The MemGuard replacement allocator used for tamper-after-free detection
616DEBUG_MEMGUARD		opt_vm.h
617
618# The RedZone malloc(9) protection
619DEBUG_REDZONE		opt_vm.h
620
621# Standard SMP options
622SMP			opt_global.h
623
624# Size of the kernel message buffer
625MSGBUF_SIZE		opt_msgbuf.h
626
627# NFS options
628NFS_MINATTRTIMO		opt_nfs.h
629NFS_MAXATTRTIMO		opt_nfs.h
630NFS_MINDIRATTRTIMO	opt_nfs.h
631NFS_MAXDIRATTRTIMO	opt_nfs.h
632NFS_DEBUG		opt_nfs.h
633
634# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
635OVERRIDE_CARD			opt_bktr.h
636OVERRIDE_TUNER			opt_bktr.h
637OVERRIDE_DBX			opt_bktr.h
638OVERRIDE_MSP			opt_bktr.h
639BROOKTREE_SYSTEM_DEFAULT	opt_bktr.h
640BROOKTREE_ALLOC_PAGES		opt_bktr.h
641BKTR_OVERRIDE_CARD		opt_bktr.h
642BKTR_OVERRIDE_TUNER		opt_bktr.h
643BKTR_OVERRIDE_DBX		opt_bktr.h
644BKTR_OVERRIDE_MSP		opt_bktr.h
645BKTR_SYSTEM_DEFAULT		opt_bktr.h
646BKTR_ALLOC_PAGES		opt_bktr.h
647BKTR_USE_PLL			opt_bktr.h
648BKTR_GPIO_ACCESS		opt_bktr.h
649BKTR_NO_MSP_RESET		opt_bktr.h
650BKTR_430_FX_MODE		opt_bktr.h
651BKTR_SIS_VIA_MODE		opt_bktr.h
652BKTR_USE_FREEBSD_SMBUS		opt_bktr.h
653BKTR_NEW_MSP34XX_DRIVER		opt_bktr.h
654
655# Options for uart(4)
656UART_PPS_ON_CTS		opt_uart.h
657UART_POLL_FREQ		opt_uart.h
658UART_DEV_TOLERANCE_PCT	opt_uart.h
659
660# options for bus/device framework
661BUS_DEBUG		opt_bus.h
662
663# options for USB support
664USB_DEBUG		opt_usb.h
665USB_HOST_ALIGN		opt_usb.h
666USB_REQ_DEBUG		opt_usb.h
667USB_TEMPLATE		opt_usb.h
668USB_VERBOSE		opt_usb.h
669USB_DMA_SINGLE_ALLOC	opt_usb.h
670USB_EHCI_BIG_ENDIAN_DESC	opt_usb.h
671U3G_DEBUG		opt_u3g.h
672UKBD_DFLT_KEYMAP	opt_ukbd.h
673UPLCOM_INTR_INTERVAL	opt_uplcom.h
674UVSCOM_DEFAULT_OPKTSIZE	opt_uvscom.h
675UVSCOM_INTR_INTERVAL	opt_uvscom.h
676
677# options for the Realtek RTL8188*U/RTL8192CU driver (urtwn)
678URTWN_WITHOUT_UCODE	opt_urtwn.h
679
680# Embedded system options
681INIT_PATH
682
683ROOTDEVNAME
684
685FDC_DEBUG		opt_fdc.h
686PCFCLOCK_VERBOSE	opt_pcfclock.h
687PCFCLOCK_MAX_RETRIES	opt_pcfclock.h
688
689KTR			opt_global.h
690KTR_ALQ			opt_ktr.h
691KTR_MASK		opt_ktr.h
692KTR_CPUMASK		opt_ktr.h
693KTR_COMPILE		opt_global.h
694KTR_BOOT_ENTRIES	opt_global.h
695KTR_ENTRIES		opt_global.h
696KTR_VERBOSE		opt_ktr.h
697WITNESS			opt_global.h
698WITNESS_KDB		opt_witness.h
699WITNESS_NO_VNODE	opt_witness.h
700WITNESS_SKIPSPIN	opt_witness.h
701WITNESS_COUNT		opt_witness.h
702OPENSOLARIS_WITNESS	opt_global.h
703
704# options for ACPI support
705ACPI_DEBUG		opt_acpi.h
706ACPI_MAX_TASKS		opt_acpi.h
707ACPI_MAX_THREADS	opt_acpi.h
708ACPI_DMAR		opt_acpi.h
709DEV_ACPI		opt_acpi.h
710
711# ISA support
712DEV_ISA			opt_isa.h
713ISAPNP			opt_isa.h
714
715# various 'device presence' options.
716DEV_BPF			opt_bpf.h
717DEV_CARP		opt_carp.h
718DEV_MCA			opt_mca.h
719DEV_NETMAP		opt_global.h
720DEV_PCI			opt_pci.h
721DEV_PF			opt_pf.h
722DEV_PFLOG		opt_pf.h
723DEV_PFSYNC		opt_pf.h
724DEV_RANDOM		opt_global.h
725DEV_SPLASH		opt_splash.h
726DEV_VLAN		opt_vlan.h
727
728# EISA support
729DEV_EISA		opt_eisa.h
730EISA_SLOTS		opt_eisa.h
731
732# ed driver
733ED_HPP			opt_ed.h
734ED_3C503		opt_ed.h
735ED_SIC			opt_ed.h
736
737# bce driver
738BCE_DEBUG		opt_bce.h
739BCE_NVRAM_WRITE_SUPPORT	opt_bce.h
740
741SOCKBUF_DEBUG		opt_global.h
742
743
744# options for ubsec driver
745UBSEC_DEBUG		opt_ubsec.h
746UBSEC_RNDTEST		opt_ubsec.h
747UBSEC_NO_RNG		opt_ubsec.h
748
749# options for hifn driver
750HIFN_DEBUG		opt_hifn.h
751HIFN_RNDTEST		opt_hifn.h
752
753# options for safenet driver
754SAFE_DEBUG		opt_safe.h
755SAFE_NO_RNG		opt_safe.h
756SAFE_RNDTEST		opt_safe.h
757
758# syscons/vt options
759MAXCONS			opt_syscons.h
760SC_ALT_MOUSE_IMAGE	opt_syscons.h
761SC_CUT_SPACES2TABS	opt_syscons.h
762SC_CUT_SEPCHARS		opt_syscons.h
763SC_DEBUG_LEVEL		opt_syscons.h
764SC_DFLT_FONT		opt_syscons.h
765SC_DISABLE_KDBKEY	opt_syscons.h
766SC_DISABLE_REBOOT	opt_syscons.h
767SC_HISTORY_SIZE		opt_syscons.h
768SC_KERNEL_CONS_ATTR	opt_syscons.h
769SC_KERNEL_CONS_REV_ATTR	opt_syscons.h
770SC_MOUSE_CHAR		opt_syscons.h
771SC_NO_CUTPASTE		opt_syscons.h
772SC_NO_FONT_LOADING	opt_syscons.h
773SC_NO_HISTORY		opt_syscons.h
774SC_NO_MODE_CHANGE	opt_syscons.h
775SC_NO_SUSPEND_VTYSWITCH	opt_syscons.h
776SC_NO_SYSMOUSE		opt_syscons.h
777SC_NORM_ATTR		opt_syscons.h
778SC_NORM_REV_ATTR	opt_syscons.h
779SC_PIXEL_MODE		opt_syscons.h
780SC_RENDER_DEBUG		opt_syscons.h
781SC_TWOBUTTON_MOUSE	opt_syscons.h
782VT_ALT_TO_ESC_HACK	opt_syscons.h
783VT_FB_DEFAULT_WIDTH	opt_syscons.h
784VT_FB_DEFAULT_HEIGHT	opt_syscons.h
785VT_MAXWINDOWS		opt_syscons.h
786VT_TWOBUTTON_MOUSE	opt_syscons.h
787DEV_SC			opt_syscons.h
788DEV_VT			opt_syscons.h
789
790# teken terminal emulator options
791TEKEN_CONS25		opt_teken.h
792TEKEN_UTF8		opt_teken.h
793TERMINAL_KERN_ATTR	opt_teken.h
794TERMINAL_NORM_ATTR	opt_teken.h
795
796# options for printf
797PRINTF_BUFR_SIZE	opt_printf.h
798
799# kbd options
800KBD_DISABLE_KEYMAP_LOAD	opt_kbd.h
801KBD_INSTALL_CDEV	opt_kbd.h
802KBD_MAXRETRY		opt_kbd.h
803KBD_MAXWAIT		opt_kbd.h
804KBD_RESETDELAY		opt_kbd.h
805KBDIO_DEBUG		opt_kbd.h
806
807KBDMUX_DFLT_KEYMAP	opt_kbdmux.h
808
809# options for the Atheros driver
810ATH_DEBUG		opt_ath.h
811ATH_TXBUF		opt_ath.h
812ATH_RXBUF		opt_ath.h
813ATH_DIAGAPI		opt_ath.h
814ATH_TX99_DIAG		opt_ath.h
815ATH_ENABLE_11N		opt_ath.h
816ATH_ENABLE_DFS		opt_ath.h
817ATH_EEPROM_FIRMWARE	opt_ath.h
818ATH_ENABLE_RADIOTAP_VENDOR_EXT	opt_ath.h
819ATH_DEBUG_ALQ		opt_ath.h
820ATH_KTR_INTR_DEBUG	opt_ath.h
821
822# options for the Atheros hal
823AH_SUPPORT_AR5416	opt_ah.h
824# XXX For now, this breaks non-AR9130 chipsets, so only use it
825# XXX when actually targetting AR9130.
826AH_SUPPORT_AR9130	opt_ah.h
827
828# This is required for AR933x SoC support
829AH_SUPPORT_AR9330	opt_ah.h
830AH_SUPPORT_AR9340	opt_ah.h
831AH_SUPPORT_QCA9530	opt_ah.h
832AH_SUPPORT_QCA9550	opt_ah.h
833
834AH_DEBUG		opt_ah.h
835AH_ASSERT		opt_ah.h
836AH_DEBUG_ALQ		opt_ah.h
837AH_REGOPS_FUNC		opt_ah.h
838AH_WRITE_REGDOMAIN	opt_ah.h
839AH_DEBUG_COUNTRY	opt_ah.h
840AH_WRITE_EEPROM		opt_ah.h
841AH_PRIVATE_DIAG		opt_ah.h
842AH_NEED_DESC_SWAP	opt_ah.h
843AH_USE_INIPDGAIN	opt_ah.h
844AH_MAXCHAN		opt_ah.h
845AH_RXCFG_SDMAMW_4BYTES	opt_ah.h
846AH_INTERRUPT_DEBUGGING	opt_ah.h
847# AR5416 and later interrupt mitigation
848# XXX do not use this for AR9130
849AH_AR5416_INTERRUPT_MITIGATION	opt_ah.h
850
851# options for the Broadcom BCM43xx driver (bwi)
852BWI_DEBUG		opt_bwi.h
853BWI_DEBUG_VERBOSE	opt_bwi.h
854
855# options for the Marvell 8335 wireless driver
856MALO_DEBUG		opt_malo.h
857MALO_TXBUF		opt_malo.h
858MALO_RXBUF		opt_malo.h
859
860# options for the Marvell wireless driver
861MWL_DEBUG		opt_mwl.h
862MWL_TXBUF		opt_mwl.h
863MWL_RXBUF		opt_mwl.h
864MWL_DIAGAPI		opt_mwl.h
865MWL_AGGR_SIZE		opt_mwl.h
866MWL_TX_NODROP		opt_mwl.h
867
868# Options for the Intel 802.11ac wireless driver
869IWM_DEBUG		opt_iwm.h
870
871# Options for the Intel 802.11n wireless driver
872IWN_DEBUG		opt_iwn.h
873
874# Options for the Intel 3945ABG wireless driver
875WPI_DEBUG		opt_wpi.h
876
877# dcons options
878DCONS_BUF_SIZE		opt_dcons.h
879DCONS_POLL_HZ		opt_dcons.h
880DCONS_FORCE_CONSOLE	opt_dcons.h
881DCONS_FORCE_GDB		opt_dcons.h
882
883# HWPMC options
884HWPMC_DEBUG		opt_global.h
885HWPMC_HOOKS
886HWPMC_MIPS_BACKTRACE 	opt_hwpmc_hooks.h
887
888# XBOX options for FreeBSD/i386, but some files are MI
889XBOX			opt_xbox.h
890
891# Interrupt filtering
892INTR_FILTER
893
894# 802.11 support layer
895IEEE80211_DEBUG		opt_wlan.h
896IEEE80211_DEBUG_REFCNT	opt_wlan.h
897IEEE80211_AMPDU_AGE	opt_wlan.h
898IEEE80211_SUPPORT_MESH	opt_wlan.h
899IEEE80211_SUPPORT_SUPERG	opt_wlan.h
900IEEE80211_SUPPORT_TDMA	opt_wlan.h
901IEEE80211_ALQ		opt_wlan.h
902IEEE80211_DFS_DEBUG	opt_wlan.h
903
904# 802.11 TDMA support
905TDMA_SLOTLEN_DEFAULT	opt_tdma.h
906TDMA_SLOTCNT_DEFAULT	opt_tdma.h
907TDMA_BINTVAL_DEFAULT	opt_tdma.h
908TDMA_TXRATE_11B_DEFAULT	opt_tdma.h
909TDMA_TXRATE_11G_DEFAULT	opt_tdma.h
910TDMA_TXRATE_11A_DEFAULT	opt_tdma.h
911TDMA_TXRATE_TURBO_DEFAULT	opt_tdma.h
912TDMA_TXRATE_HALF_DEFAULT	opt_tdma.h
913TDMA_TXRATE_QUARTER_DEFAULT	opt_tdma.h
914TDMA_TXRATE_11NA_DEFAULT	opt_tdma.h
915TDMA_TXRATE_11NG_DEFAULT	opt_tdma.h
916
917# VideoMode
918PICKMODE_DEBUG			opt_videomode.h
919
920# Network stack virtualization options
921VIMAGE			opt_global.h
922VNET_DEBUG		opt_global.h
923
924# Common Flash Interface (CFI) options
925CFI_SUPPORT_STRATAFLASH	opt_cfi.h
926CFI_ARMEDANDDANGEROUS	opt_cfi.h
927CFI_HARDWAREBYTESWAP	opt_cfi.h
928
929# Sound options
930SND_DEBUG		opt_snd.h
931SND_DIAGNOSTIC		opt_snd.h
932SND_FEEDER_MULTIFORMAT	opt_snd.h
933SND_FEEDER_FULL_MULTIFORMAT	opt_snd.h
934SND_FEEDER_RATE_HP	opt_snd.h
935SND_PCM_64		opt_snd.h
936SND_OLDSTEREO		opt_snd.h
937
938X86BIOS
939
940# Flattened device tree options
941FDT		opt_platform.h
942FDT_DTB_STATIC	opt_platform.h
943
944# OFED Infiniband stack
945OFED		opt_ofed.h
946OFED_DEBUG_INIT	opt_ofed.h
947SDP		opt_ofed.h
948SDP_DEBUG	opt_ofed.h
949IPOIB		opt_ofed.h
950IPOIB_DEBUG	opt_ofed.h
951IPOIB_CM	opt_ofed.h
952
953# Resource Accounting
954RACCT		opt_global.h
955RACCT_DEFAULT_TO_DISABLED	opt_global.h
956
957# Resource Limits
958RCTL		opt_global.h
959
960# Random number generator(s)
961# Which CSPRNG hash we get.
962# If Yarrow is not chosen, Fortuna is selected.
963RANDOM_YARROW	opt_global.h
964# With this, no entropy processor is loaded, but the entropy
965# harvesting infrastructure is present. This means an entropy
966# processor may be loaded as a module.
967RANDOM_LOADABLE	opt_global.h
968# This turns on high-rate and potentially expensive harvesting in
969# the uma slab allocator.
970RANDOM_ENABLE_UMA	opt_global.h
971
972# Intel em(4) driver
973EM_MULTIQUEUE	opt_em.h
974