1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affect only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33# Adaptec Array Controller driver options 34AAC_DEBUG opt_aac.h # Debugging levels: 35 # 0 - quiet, only emit warnings 36 # 1 - noisy, emit major function 37 # points and things done 38 # 2 - extremely noisy, emit trace 39 # items in loops, etc. 40 41# Adaptec aic7xxx SCSI controller options 42AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory 43 # mapped I/O 44 45AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable 46 # targetmode operations. 47 48AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our 49 # configuration prom. 50 51AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code. 52 53AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options. 54 # See sys/dev/aic7xxx/aic7xxx.h 55 56AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug 57 # output. Adds ~128k to driver. 58 59# Adaptec aic79xx SCSI controller options 60AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code. 61 62AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options. 63 # See sys/dev/aic7xxx/aic79xx.h 64 65AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable 66 # targetmode operations. 67 68AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug 69 # output. Adds ~215k to driver. 70 71ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 72 # mapped I/O 73 74# Miscellaneous options. 75ADAPTIVE_MUTEXES 76ALQ 77CODA_COMPAT_5 opt_coda.h 78COMPAT_43 opt_compat.h 79COMPAT_FREEBSD4 opt_compat.h 80COMPAT_SUNOS opt_compat.h 81COMPILING_LINT opt_global.h 82CONSPEED opt_comconsole.h 83CY_PCI_FASTINTR 84DDB 85DDB_NOKLDSYM opt_ddb.h 86DDB_NUMSYM opt_ddb.h 87DDB_TRACE 88DDB_UNATTENDED 89DIRECTIO opt_directio.h 90GDB_REMOTE_CHAT opt_ddb.h 91GDBSPEED opt_ddb.h 92GEOM_AES opt_geom.h 93GEOM_APPLE opt_geom.h 94GEOM_BDE opt_geom.h 95GEOM_BSD opt_geom.h 96GEOM_FOX opt_geom.h 97GEOM_GPT opt_geom.h 98GEOM_MBR opt_geom.h 99GEOM_MIRROR opt_geom.h 100GEOM_PC98 opt_geom.h 101GEOM_SUNLABEL opt_geom.h 102GEOM_VOL opt_geom.h 103HW_WDOG 104KSTACK_MAX_PAGES 105KSTACK_PAGES 106KTRACE 107KTRACE_REQUEST_POOL opt_ktrace.h 108LIBICONV 109MAC 110MAC_ALWAYS_LABEL_MBUF opt_mac.h 111MAC_BIBA opt_dontuse.h 112MAC_BSDEXTENDED opt_dontuse.h 113MAC_DEBUG opt_mac.h 114MAC_IFOFF opt_dontuse.h 115MAC_LOMAC opt_dontuse.h 116MAC_MLS opt_dontuse.h 117MAC_NONE opt_dontuse.h 118MAC_PARTITION opt_dontuse.h 119MAC_PORTACL opt_dontuse.h 120MAC_SEEOTHERUIDS opt_dontuse.h 121MAC_STUB opt_dontuse.h 122MAC_TEST opt_dontuse.h 123MD_ROOT opt_md.h 124MD_ROOT_SIZE opt_md.h 125NSWBUF_MIN opt_swap.h 126PANIC_REBOOT_WAIT_TIME opt_panic.h 127PPS_SYNC opt_ntp.h 128PUC_FASTINTR opt_puc.h 129QUOTA 130SCHED_4BSD opt_sched.h 131SCHED_ULE opt_sched.h 132SHOW_BUSYBUFS 133SPX_HACK 134SUIDDIR opt_suiddir.h 135MSGMNB opt_sysvipc.h 136MSGMNI opt_sysvipc.h 137MSGSEG opt_sysvipc.h 138MSGSSZ opt_sysvipc.h 139MSGTQL opt_sysvipc.h 140SEMMAP opt_sysvipc.h 141SEMMNI opt_sysvipc.h 142SEMMNS opt_sysvipc.h 143SEMMNU opt_sysvipc.h 144SEMMSL opt_sysvipc.h 145SEMOPM opt_sysvipc.h 146SEMUME opt_sysvipc.h 147SHMALL opt_sysvipc.h 148SHMMAX opt_sysvipc.h 149SHMMAXPGS opt_sysvipc.h 150SHMMIN opt_sysvipc.h 151SHMMNI opt_sysvipc.h 152SHMSEG opt_sysvipc.h 153SYSVMSG opt_sysvipc.h 154SYSVSEM opt_sysvipc.h 155SYSVSHM opt_sysvipc.h 156TTYHOG opt_tty.h 157VFS_AIO 158WATCHDOG opt_watchdog.h 159WLCACHE opt_wavelan.h 160WLDEBUG opt_wavelan.h 161 162# POSIX kernel options 163P1003_1B_SEMAPHORES opt_posix.h 164_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 165 166# Do we want the config file compiled into the kernel? 167INCLUDE_CONFIG_FILE opt_config.h 168 169# Options for static filesystems. These should only be used at config 170# time, since the corresponding lkms cannot work if there are any static 171# dependencies. Unusability is enforced by hiding the defines for the 172# options in a never-included header. 173CD9660 opt_dontuse.h 174CODA opt_dontuse.h 175EXT2FS opt_dontuse.h 176FDESCFS opt_dontuse.h 177HPFS opt_dontuse.h 178LINPROCFS opt_dontuse.h 179MSDOSFS opt_dontuse.h 180NTFS opt_dontuse.h 181NULLFS opt_dontuse.h 182NWFS opt_dontuse.h 183PORTALFS opt_dontuse.h 184PROCFS opt_dontuse.h 185PSEUDOFS opt_dontuse.h 186SMBFS opt_dontuse.h 187UDF opt_dontuse.h 188UMAPFS opt_dontuse.h 189UNIONFS opt_dontuse.h 190 191# Broken - ffs_snapshot() dependency from ufs_lookup() :-( 192FFS opt_ffs_broken_fixme.h 193 194# These static filesystems have one slightly bogus static dependency in 195# sys/i386/i386/autoconf.c. If any of these filesystems are 196# statically compiled into the kernel, code for mounting them as root 197# filesystems will be enabled - but look below. 198NFSCLIENT opt_nfs.h 199NFSSERVER opt_nfs.h 200 201# filesystems and libiconv bridge 202CD9660_ICONV opt_dontuse.h 203MSDOSFS_ICONV opt_dontuse.h 204NTFS_ICONV opt_dontuse.h 205UDF_ICONV opt_dontuse.h 206 207# If you are following the conditions in the copyright, 208# you can enable soft-updates which will speed up a lot of thigs 209# and make the system safer from crashes at the same time. 210# otherwise a STUB module will be compiled in. 211SOFTUPDATES opt_ffs.h 212 213# Enabling this option turns on support for Access Control Lists in UFS, 214# which can be used to support high security configurations. Depends on 215# UFS_EXTATTR. 216UFS_ACL opt_ufs.h 217 218# Enabling this option turns on support for extended attributes in UFS-based 219# filesystems, which can be used to support high security configurations 220# as well as new filesystem features. 221UFS_EXTATTR opt_ufs.h 222UFS_EXTATTR_AUTOSTART opt_ufs.h 223 224# Enable fast hash lookups for large directories on UFS-based filesystems. 225UFS_DIRHASH opt_ufs.h 226 227# The below sentence is not in English, and neither is this one. 228# We plan to remove the static dependences above, with a 229# <filesystem>_ROOT option to control if it usable as root. This list 230# allows these options to be present in config files already (though 231# they won't make any difference yet). 232NFS_ROOT opt_nfsroot.h 233 234# SMB/CIFS requester 235NETSMB opt_netsmb.h 236NETSMBCRYPTO opt_netsmb.h 237 238# Options used only in subr_param.c. 239HZ opt_param.h 240MAXFILES opt_param.h 241NBUF opt_param.h 242NMBCLUSTERS opt_param.h 243NSFBUFS opt_param.h 244VM_BCACHE_SIZE_MAX opt_param.h 245VM_SWZONE_SIZE_MAX opt_param.h 246MAXUSERS 247DFLDSIZ opt_param.h 248MAXDSIZ opt_param.h 249MAXSSIZ opt_param.h 250 251# Generic SCSI options. 252CAM_MAX_HIGHPOWER opt_cam.h 253CAMDEBUG opt_cam.h 254CAM_DEBUG_DELAY opt_cam.h 255CAM_DEBUG_BUS opt_cam.h 256CAM_DEBUG_TARGET opt_cam.h 257CAM_DEBUG_LUN opt_cam.h 258CAM_DEBUG_FLAGS opt_cam.h 259CAM_NEW_TRAN_CODE opt_cam.h 260SCSI_DELAY opt_scsi.h 261SCSI_NO_SENSE_STRINGS opt_scsi.h 262SCSI_NO_OP_STRINGS opt_scsi.h 263 264# Options used only in cam/scsi/scsi_cd.c 265CHANGER_MIN_BUSY_SECONDS opt_cd.h 266CHANGER_MAX_BUSY_SECONDS opt_cd.h 267 268DA_OLD_QUIRKS opt_da.h 269 270# Options used only in cam/scsi/scsi_sa.c. 271SA_IO_TIMEOUT opt_sa.h 272SA_SPACE_TIMEOUT opt_sa.h 273SA_REWIND_TIMEOUT opt_sa.h 274SA_ERASE_TIMEOUT opt_sa.h 275SA_1FM_AT_EOD opt_sa.h 276 277# Options used only in cam/scsi/scsi_pt.c 278SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 279 280# Options used only in cam/scsi/scsi_ses.c 281SES_ENABLE_PASSTHROUGH opt_ses.h 282 283# Options used in dev/sym/ (Symbios SCSI driver). 284SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 285 # Allows the ncr to take precedence 286 # 1 (1<<0) -> 810a, 860 287 # 2 (1<<1) -> 825a, 875, 885, 895 288 # 4 (1<<2) -> 895a, 896, 1510d 289SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 290 # disabled:0 (default), enabled:1 291SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 292 # disabled:0, enabled:1 (default) 293SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 294 # default:8, range:[1..64] 295 296# Options used only in pci/ncr.c 297SCSI_NCR_DEBUG opt_ncr.h 298SCSI_NCR_MAX_SYNC opt_ncr.h 299SCSI_NCR_MAX_WIDE opt_ncr.h 300SCSI_NCR_MYADDR opt_ncr.h 301 302# Options used only in dev/isp/* 303ISP_TARGET_MODE opt_isp.h 304ISP_FW_CRASH_DUMP opt_isp.h 305 306# Options used in the 'ata' ATA/ATAPI driver 307ATA_STATIC_ID opt_ata.h 308ATA_NOPCI opt_ata.h 309DEV_ATADISK opt_ata.h 310DEV_ATAPICD opt_ata.h 311DEV_ATAPIST opt_ata.h 312DEV_ATAPIFD opt_ata.h 313DEV_ATAPICAM opt_ata.h 314DEV_ATARAID opt_ata.h 315 316# Net stuff. 317ACCEPT_FILTER_DATA 318ACCEPT_FILTER_HTTP 319BOOTP opt_bootp.h 320BOOTP_COMPAT opt_bootp.h 321BOOTP_NFSROOT opt_bootp.h 322BOOTP_NFSV3 opt_bootp.h 323BOOTP_WIRED_TO opt_bootp.h 324BRIDGE opt_bdg.h 325DEV_PF opt_pf.h 326DEV_PFLOG opt_pf.h 327DEV_PFSYNC opt_pf.h 328ETHER_II opt_ef.h 329ETHER_8023 opt_ef.h 330ETHER_8022 opt_ef.h 331ETHER_SNAP opt_ef.h 332MROUTING opt_mrouting.h 333PIM opt_mrouting.h 334INET opt_inet.h 335INET6 opt_inet6.h 336IPSEC opt_ipsec.h 337IPSEC_ESP opt_ipsec.h 338IPSEC_DEBUG opt_ipsec.h 339IPSEC_FILTERGIF opt_ipsec.h 340FAST_IPSEC opt_ipsec.h 341IPDIVERT 342DUMMYNET opt_ipdn.h 343IPFILTER opt_ipfilter.h 344IPFILTER_LOG opt_ipfilter.h 345IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 346PFIL_HOOKS opt_pfil_hooks.h 347IPFIREWALL opt_ipfw.h 348IPFIREWALL_VERBOSE opt_ipfw.h 349IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 350IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 351IPV6FIREWALL opt_ip6fw.h 352IPV6FIREWALL_VERBOSE opt_ip6fw.h 353IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 354IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 355IPSTEALTH 356IPX 357IPXIP opt_ipx.h 358LIBMBPOOL 359LIBMCHAIN 360MBUF_STRESS_TEST opt_mbuf_stress_test.h 361NCP 362NETATALK opt_atalk.h 363PPP_BSDCOMP opt_ppp.h 364PPP_DEFLATE opt_ppp.h 365PPP_FILTER opt_ppp.h 366RANDOM_IP_ID 367SLIP_IFF_OPTS opt_slip.h 368TCPDEBUG 369TCP_SIGNATURE opt_inet.h 370TCP_DROP_SYNFIN opt_tcp_input.h 371XBONEHACK 372 373# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 374# Each netgraph node type can be either be compiled into the kernel 375# or loaded dynamically. To get the former, include the corresponding 376# option below. Each type has its own man page, e.g. ng_async(4). 377NETGRAPH 378NETGRAPH_ASYNC opt_netgraph.h 379NETGRAPH_BPF opt_netgraph.h 380NETGRAPH_BRIDGE opt_netgraph.h 381NETGRAPH_CISCO opt_netgraph.h 382NETGRAPH_ECHO opt_netgraph.h 383NETGRAPH_ETHER opt_netgraph.h 384NETGRAPH_FRAME_RELAY opt_netgraph.h 385NETGRAPH_GIF opt_netgraph.h 386NETGRAPH_GIF_DEMUX opt_netgraph.h 387NETGRAPH_HOLE opt_netgraph.h 388NETGRAPH_IFACE opt_netgraph.h 389NETGRAPH_IP_INPUT opt_netgraph.h 390NETGRAPH_KSOCKET opt_netgraph.h 391NETGRAPH_L2TP opt_netgraph.h 392NETGRAPH_LMI opt_netgraph.h 393# MPPC compression requires proprietary files (not included) 394NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 395NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 396NETGRAPH_ONE2MANY opt_netgraph.h 397NETGRAPH_PPP opt_netgraph.h 398NETGRAPH_PPPOE opt_netgraph.h 399NETGRAPH_PPTPGRE opt_netgraph.h 400NETGRAPH_RFC1490 opt_netgraph.h 401NETGRAPH_SOCKET opt_netgraph.h 402NETGRAPH_SPLIT opt_netgraph.h 403NETGRAPH_TEE opt_netgraph.h 404NETGRAPH_TTY opt_netgraph.h 405NETGRAPH_UI opt_netgraph.h 406NETGRAPH_VJC opt_netgraph.h 407NETGRAPH_ATM_ATMPIF opt_netgraph.h 408 409# NgATM options 410NGATM_ATM opt_netgraph.h 411NGATM_ATMBASE opt_netgraph.h 412NGATM_SSCOP opt_netgraph.h 413NGATM_SSCFU opt_netgraph.h 414NGATM_UNI opt_netgraph.h 415 416# DRM options 417DRM_DEBUG opt_drm.h 418 419ZERO_COPY_SOCKETS opt_zero.h 420TI_PRIVATE_JUMBOS opt_ti.h 421TI_JUMBO_HDRSPLIT opt_ti.h 422 423# ATM (HARP version) 424ATM_CORE opt_atm.h 425ATM_IP opt_atm.h 426ATM_SIGPVC opt_atm.h 427ATM_SPANS opt_atm.h 428ATM_UNI opt_atm.h 429 430# XXX Conflict: # of devices vs network protocol (Native ATM). 431# This makes "atm.h" unusable. 432NATM 433 434# DPT driver debug flags 435DPT_MEASURE_PERFORMANCE opt_dpt.h 436DPT_HANDLE_TIMEOUTS opt_dpt.h 437DPT_TIMEOUT_FACTOR opt_dpt.h 438DPT_LOST_IRQ opt_dpt.h 439DPT_RESET_HBA opt_dpt.h 440 441# Adaptec ASR and DPT V/VI controller options 442ASR_MEASURE_PERFORMANCE opt_asr.h 443 444# Misc debug flags. Most of these should probably be replaced with 445# 'DEBUG', and then let people recompile just the interesting modules 446# with 'make CC="cc -DDEBUG"'. 447CLUSTERDEBUG opt_debug_cluster.h 448DEBUG_1284 opt_ppb_1284.h 449VP0_DEBUG opt_vpo.h 450LPT_DEBUG opt_lpt.h 451PLIP_DEBUG opt_plip.h 452LOCKF_DEBUG opt_debug_lockf.h 453NPX_DEBUG opt_debug_npx.h 454NETATALKDEBUG opt_atalk.h 455SI_DEBUG opt_debug_si.h 456 457# Fb options 458FB_DEBUG opt_fb.h 459FB_INSTALL_CDEV opt_fb.h 460 461# ppbus related options 462PERIPH_1284 opt_ppb_1284.h 463DONTPROBE_1284 opt_ppb_1284.h 464 465# smbus related options 466ENABLE_ALART opt_intpm.h 467 468# These cause changes all over the kernel 469BLKDEV_IOSIZE opt_global.h 470BURN_BRIDGES opt_global.h 471DEBUG opt_global.h 472DEBUG_LOCKS opt_global.h 473DEBUG_VFS_LOCKS opt_global.h 474DIAGNOSTIC opt_global.h 475INVARIANT_SUPPORT opt_global.h 476INVARIANTS opt_global.h 477LOOKUP_SHARED opt_global.h 478MCLSHIFT opt_global.h 479MUTEX_DEBUG opt_global.h 480MUTEX_NOINLINE opt_global.h 481MUTEX_PROFILING opt_global.h 482MSIZE opt_global.h 483REGRESSION opt_global.h 484RESTARTABLE_PANICS opt_global.h 485VFS_BIO_DEBUG opt_global.h 486 487# These are VM related options 488VM_KMEM_SIZE opt_vm.h 489VM_KMEM_SIZE_SCALE opt_vm.h 490VM_KMEM_SIZE_MAX opt_vm.h 491NO_SWAPPING opt_vm.h 492MALLOC_MAKE_FAILURES opt_vm.h 493MALLOC_PROFILE opt_vm.h 494PQ_NOOPT opt_vmpage.h 495PQ_NORMALCACHE opt_vmpage.h 496PQ_MEDIUMCACHE opt_vmpage.h 497PQ_LARGECACHE opt_vmpage.h 498PQ_HUGECACHE opt_vmpage.h 499PQ_CACHESIZE opt_vmpage.h 500 501# Standard SMP options 502SMP opt_global.h 503 504# Size of the kernel message buffer 505MSGBUF_SIZE opt_msgbuf.h 506 507# NFS options 508NFS_MINATTRTIMO opt_nfs.h 509NFS_MAXATTRTIMO opt_nfs.h 510NFS_MINDIRATTRTIMO opt_nfs.h 511NFS_MAXDIRATTRTIMO opt_nfs.h 512NFS_GATHERDELAY opt_nfs.h 513NFS_WDELAYHASHSIZ opt_nfs.h 514NFS_DEBUG opt_nfs.h 515 516# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 517OVERRIDE_CARD opt_bktr.h 518OVERRIDE_TUNER opt_bktr.h 519OVERRIDE_DBX opt_bktr.h 520OVERRIDE_MSP opt_bktr.h 521BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 522BROOKTREE_ALLOC_PAGES opt_bktr.h 523BKTR_OVERRIDE_CARD opt_bktr.h 524BKTR_OVERRIDE_TUNER opt_bktr.h 525BKTR_OVERRIDE_DBX opt_bktr.h 526BKTR_OVERRIDE_MSP opt_bktr.h 527BKTR_SYSTEM_DEFAULT opt_bktr.h 528BKTR_ALLOC_PAGES opt_bktr.h 529BKTR_USE_PLL opt_bktr.h 530BKTR_GPIO_ACCESS opt_bktr.h 531BKTR_NO_MSP_RESET opt_bktr.h 532BKTR_430_FX_MODE opt_bktr.h 533BKTR_SIS_VIA_MODE opt_bktr.h 534BKTR_USE_FREEBSD_SMBUS opt_bktr.h 535BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 536 537# options for serial support 538COM_ESP opt_sio.h 539COM_MULTIPORT opt_sio.h 540BREAK_TO_DEBUGGER opt_comconsole.h 541ALT_BREAK_TO_DEBUGGER opt_comconsole.h 542 543# Options to support PPS 544UART_PPS_ON_CTS opt_uart.h 545 546# options for bus/device framework 547BUS_DEBUG opt_bus.h 548 549# options for USB support 550USB_DEBUG opt_usb.h 551UKBD_DFLT_KEYMAP opt_ukbd.h 552UPLCOM_INTR_INTERVAL opt_uplcom.h 553UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 554UVSCOM_INTR_INTERVAL opt_uvscom.h 555 556# Vinum options 557VINUMDEBUG opt_vinum.h 558 559# Embedded system options 560INIT_PATH opt_init_path.h 561 562ROOTDEVNAME opt_rootdevname.h 563 564FDC_DEBUG opt_fdc.h 565PCFCLOCK_VERBOSE opt_pcfclock.h 566PCFCLOCK_MAX_RETRIES opt_pcfclock.h 567TDFX_LINUX opt_tdfx.h 568 569# RAIDframe options 570RAID_AUTOCONFIG opt_raid.h 571RAID_DEBUG opt_raid.h 572 573KTR opt_global.h 574KTR_ALQ opt_ktr.h 575KTR_MASK opt_ktr.h 576KTR_CPUMASK opt_ktr.h 577KTR_COMPILE opt_global.h 578KTR_ENTRIES opt_global.h 579KTR_VERBOSE opt_ktr.h 580WITNESS opt_global.h 581WITNESS_DDB opt_witness.h 582WITNESS_SKIPSPIN opt_witness.h 583 584# options for ACPI support 585ACPI_DEBUG opt_acpi.h 586ACPI_MAX_THREADS opt_acpi.h 587ACPI_NO_SEMAPHORES opt_acpi.h 588ACPICA_PEDANTIC opt_acpi.h 589 590# options for DEVFS, see sys/fs/devfs/devfs.h 591NDEVFSINO opt_devfs.h 592NDEVFSOVERFLOW opt_devfs.h 593 594# various 'device presence' options. 595DEV_BPF opt_bpf.h 596DEV_ISA opt_isa.h 597DEV_MCA opt_mca.h 598DEV_SPLASH opt_splash.h 599 600EISA_SLOTS opt_eisa.h 601 602# ed driver 603ED_NO_MIIBUS opt_ed.h 604 605# wi driver 606WI_SYMBOL_FIRMWARE opt_wi.h 607 608# XXX bogusly global. 609DEVICE_POLLING opt_global.h 610 611SOCKBUF_DEBUG opt_global.h 612 613# options for ubsec driver 614UBSEC_DEBUG opt_ubsec.h 615UBSEC_RNDTEST opt_ubsec.h 616UBSEC_NO_RNG opt_ubsec.h 617 618# options for hifn driver 619HIFN_DEBUG opt_hifn.h 620HIFN_RNDTEST opt_hifn.h 621 622# options for safenet driver 623SAFE_DEBUG opt_safe.h 624SAFE_NO_RNG opt_safe.h 625SAFE_RNDTEST opt_safe.h 626 627# syscons options 628MAXCONS opt_syscons.h 629SC_ALT_MOUSE_IMAGE opt_syscons.h 630SC_CUT_SPACES2TABS opt_syscons.h 631SC_CUT_SEPCHARS opt_syscons.h 632SC_DEBUG_LEVEL opt_syscons.h 633SC_DFLT_FONT opt_syscons.h 634SC_DISABLE_DDBKEY opt_syscons.h 635SC_DISABLE_REBOOT opt_syscons.h 636SC_HISTORY_SIZE opt_syscons.h 637SC_KERNEL_CONS_ATTR opt_syscons.h 638SC_KERNEL_CONS_REV_ATTR opt_syscons.h 639SC_MOUSE_CHAR opt_syscons.h 640SC_NO_CUTPASTE opt_syscons.h 641SC_NO_FONT_LOADING opt_syscons.h 642SC_NO_HISTORY opt_syscons.h 643SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 644SC_NO_SYSMOUSE opt_syscons.h 645SC_NORM_ATTR opt_syscons.h 646SC_NORM_REV_ATTR opt_syscons.h 647SC_PIXEL_MODE opt_syscons.h 648SC_RENDER_DEBUG opt_syscons.h 649SC_TWOBUTTON_MOUSE opt_syscons.h 650 651# kbd options 652KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 653KBD_INSTALL_CDEV opt_kbd.h 654KBD_MAXRETRY opt_kbd.h 655KBD_MAXWAIT opt_kbd.h 656KBD_RESETDELAY opt_kbd.h 657KBDIO_DEBUG opt_kbd.h 658 659# options for the Atheros HAL (only useful with source code) 660AH_SUPPORT_AR5210 opt_ah.h 661AH_SUPPORT_AR5211 opt_ah.h 662AH_SUPPORT_AR5212 opt_ah.h 663AH_DEBUG opt_ah.h 664AH_DEBUG_ALQ opt_ah.h 665AH_ASSERT opt_ah.h 666 667# dcons options 668DCONS_BUF_SIZE opt_dcons.h 669DCONS_POLL_HZ opt_dcons.h 670DCONS_FORCE_CONSOLE opt_dcons.h 671DCONS_FORCE_GDB opt_dcons.h 672