1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affects only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AACRAID_DEBUG opt_aacraid.h 35AHC_ALLOW_MEMIO opt_aic7xxx.h 36AHC_TMODE_ENABLE opt_aic7xxx.h 37AHC_DUMP_EEPROM opt_aic7xxx.h 38AHC_DEBUG opt_aic7xxx.h 39AHC_DEBUG_OPTS opt_aic7xxx.h 40AHC_REG_PRETTY_PRINT opt_aic7xxx.h 41AHD_DEBUG opt_aic79xx.h 42AHD_DEBUG_OPTS opt_aic79xx.h 43AHD_TMODE_ENABLE opt_aic79xx.h 44AHD_REG_PRETTY_PRINT opt_aic79xx.h 45 46# Debugging options. 47ALT_BREAK_TO_DEBUGGER opt_kdb.h 48BREAK_TO_DEBUGGER opt_kdb.h 49BUF_TRACKING opt_global.h 50DDB 51DDB_BUFR_SIZE opt_ddb.h 52DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 53DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 54DDB_CTF opt_ddb.h 55DDB_NUMSYM opt_ddb.h 56EARLY_PRINTF opt_global.h 57FULL_BUF_TRACKING opt_global.h 58GDB 59KDB opt_global.h 60KDB_TRACE opt_kdb.h 61KDB_UNATTENDED opt_kdb.h 62KLD_DEBUG opt_kld.h 63NUM_CORE_FILES opt_global.h 64QUEUE_MACRO_DEBUG_TRACE opt_global.h 65QUEUE_MACRO_DEBUG_TRASH opt_global.h 66SYSCTL_DEBUG opt_sysctl.h 67TEXTDUMP_PREFERRED opt_ddb.h 68TEXTDUMP_VERBOSE opt_ddb.h 69TSLOG opt_global.h 70TSLOGSIZE opt_global.h 71 72# Miscellaneous options. 73ALQ 74ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h 75ATSE_CFI_HACK opt_cfi.h 76AUDIT opt_global.h 77BOOTHOWTO opt_global.h 78BOOTVERBOSE opt_global.h 79CALLOUT_PROFILING 80CAPABILITIES opt_capsicum.h 81CAPABILITY_MODE opt_capsicum.h 82CC_CDG opt_global.h 83CC_CHD opt_global.h 84CC_CUBIC opt_global.h 85CC_DEFAULT opt_cc.h 86CC_DCTCP opt_global.h 87CC_HD opt_global.h 88CC_HTCP opt_global.h 89CC_NEWRENO opt_global.h 90CC_VEGAS opt_global.h 91COMPAT_43 opt_global.h 92COMPAT_43TTY opt_global.h 93COMPAT_FREEBSD4 opt_global.h 94COMPAT_FREEBSD5 opt_global.h 95COMPAT_FREEBSD6 opt_global.h 96COMPAT_FREEBSD7 opt_global.h 97COMPAT_FREEBSD9 opt_global.h 98COMPAT_FREEBSD10 opt_global.h 99COMPAT_FREEBSD11 opt_global.h 100COMPAT_FREEBSD12 opt_global.h 101COMPAT_FREEBSD13 opt_global.h 102COMPAT_LINUXKPI opt_dontuse.h 103_COMPAT_LINUX32 opt_compat.h # XXX: make sure opt_compat.h exists 104COMPILING_LINT opt_global.h 105CY_PCI_FASTINTR 106DEADLKRES opt_watchdog.h 107EXPERIMENTAL opt_global.h 108DIRECTIO 109FILEMON opt_dontuse.h 110FFCLOCK 111FULL_PREEMPTION opt_sched.h 112GZIO opt_gzio.h 113IMAGACT_BINMISC opt_dontuse.h 114IPI_PREEMPTION opt_sched.h 115GEOM_BDE opt_geom.h 116GEOM_CACHE opt_geom.h 117GEOM_CONCAT opt_geom.h 118GEOM_ELI opt_geom.h 119GEOM_GATE opt_geom.h 120GEOM_JOURNAL opt_geom.h 121GEOM_LABEL opt_geom.h 122GEOM_LABEL_GPT opt_geom.h 123GEOM_LINUX_LVM opt_geom.h 124GEOM_MAP opt_geom.h 125GEOM_MIRROR opt_geom.h 126GEOM_MOUNTVER opt_geom.h 127GEOM_MULTIPATH opt_geom.h 128GEOM_NOP opt_geom.h 129GEOM_PART_APM opt_geom.h 130GEOM_PART_BSD opt_geom.h 131GEOM_PART_BSD64 opt_geom.h 132GEOM_PART_EBR opt_geom.h 133GEOM_PART_GPT opt_geom.h 134GEOM_PART_LDM opt_geom.h 135GEOM_PART_MBR opt_geom.h 136GEOM_PART_VTOC8 opt_geom.h 137GEOM_RAID opt_geom.h 138GEOM_RAID3 opt_geom.h 139GEOM_SHSEC opt_geom.h 140GEOM_STRIPE opt_geom.h 141GEOM_UZIP opt_geom.h 142GEOM_UZIP_DEBUG opt_geom.h 143GEOM_VINUM opt_geom.h 144GEOM_VIRSTOR opt_geom.h 145GEOM_ZERO opt_geom.h 146IFLIB opt_iflib.h 147KDTRACE_HOOKS opt_global.h 148KDTRACE_FRAME opt_kdtrace.h 149KN_HASHSIZE opt_kqueue.h 150KSTACK_MAX_PAGES 151KSTACK_PAGES 152KSTACK_USAGE_PROF 153KTRACE 154KTRACE_REQUEST_POOL opt_ktrace.h 155LIBICONV 156MAC opt_global.h 157MAC_BIBA opt_dontuse.h 158MAC_BSDEXTENDED opt_dontuse.h 159MAC_DDB opt_dontuse.h 160MAC_IFOFF opt_dontuse.h 161MAC_LOMAC opt_dontuse.h 162MAC_MLS opt_dontuse.h 163MAC_NONE opt_dontuse.h 164MAC_NTPD opt_dontuse.h 165MAC_PARTITION opt_dontuse.h 166MAC_PORTACL opt_dontuse.h 167MAC_PRIORITY opt_dontuse.h 168MAC_SEEOTHERUIDS opt_dontuse.h 169MAC_STATIC opt_mac.h 170MAC_STUB opt_dontuse.h 171MAC_TEST opt_dontuse.h 172MAC_VERIEXEC opt_dontuse.h 173MAC_VERIEXEC_SHA1 opt_dontuse.h 174MAC_VERIEXEC_SHA256 opt_dontuse.h 175MAC_VERIEXEC_SHA384 opt_dontuse.h 176MAC_VERIEXEC_SHA512 opt_dontuse.h 177MD_ROOT opt_md.h 178MD_ROOT_FSTYPE opt_md.h 179MD_ROOT_READONLY opt_md.h 180MD_ROOT_SIZE opt_md.h 181MD_ROOT_MEM opt_md.h 182MFI_DEBUG opt_mfi.h 183MFI_DECODE_LOG opt_mfi.h 184MPROF_BUFFERS opt_mprof.h 185MPROF_HASH_SIZE opt_mprof.h 186NEW_PCIB opt_global.h 187NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 188NO_ADAPTIVE_RWLOCKS 189NO_ADAPTIVE_SX 190NO_OBSOLETE_CODE opt_global.h 191NO_SYSCTL_DESCR opt_global.h 192NSWBUF_MIN opt_param.h 193MBUF_PACKET_ZONE_DISABLE opt_global.h 194PANIC_REBOOT_WAIT_TIME opt_panic.h 195PCI_HP opt_pci.h 196PCI_IOV opt_global.h 197PPC_DEBUG opt_ppc.h 198PPC_PROBE_CHIPSET opt_ppc.h 199PPS_SYNC opt_ntp.h 200PREEMPTION opt_sched.h 201QUOTA 202SCHED_4BSD opt_sched.h 203SCHED_STATS opt_sched.h 204SCHED_ULE opt_sched.h 205SLEEPQUEUE_PROFILING 206SLHCI_DEBUG opt_slhci.h 207STACK opt_stack.h 208SUIDDIR 209MSGMNB opt_sysvipc.h 210MSGMNI opt_sysvipc.h 211MSGSEG opt_sysvipc.h 212MSGSSZ opt_sysvipc.h 213MSGTQL opt_sysvipc.h 214SEMMNI opt_sysvipc.h 215SEMMNS opt_sysvipc.h 216SEMMNU opt_sysvipc.h 217SEMMSL opt_sysvipc.h 218SEMOPM opt_sysvipc.h 219SEMUME opt_sysvipc.h 220SHMALL opt_sysvipc.h 221SHMMAX opt_sysvipc.h 222SHMMAXPGS opt_sysvipc.h 223SHMMIN opt_sysvipc.h 224SHMMNI opt_sysvipc.h 225SHMSEG opt_sysvipc.h 226SYSVMSG opt_sysvipc.h 227SYSVSEM opt_sysvipc.h 228SYSVSHM opt_sysvipc.h 229SW_WATCHDOG opt_watchdog.h 230TCPHPTS opt_inet.h 231TURNSTILE_PROFILING 232UMTX_PROFILING 233UMTX_CHAINS opt_global.h 234VERBOSE_SYSINIT 235ZSTDIO opt_zstdio.h 236 237# Sanitizers 238COVERAGE opt_global.h 239KASAN opt_global.h 240KCOV 241KCSAN opt_global.h 242KMSAN opt_global.h 243KUBSAN opt_global.h 244 245# POSIX kernel options 246P1003_1B_MQUEUE opt_posix.h 247P1003_1B_SEMAPHORES opt_posix.h 248_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 249 250# Do we want the config file compiled into the kernel? 251INCLUDE_CONFIG_FILE opt_config.h 252 253# Options for static filesystems. These should only be used at config 254# time, since the corresponding lkms cannot work if there are any static 255# dependencies. Unusability is enforced by hiding the defines for the 256# options in a never-included header. 257AUTOFS opt_dontuse.h 258CD9660 opt_dontuse.h 259EXT2FS opt_dontuse.h 260FDESCFS opt_dontuse.h 261FFS opt_dontuse.h 262FUSEFS opt_dontuse.h 263MSDOSFS opt_dontuse.h 264NULLFS opt_dontuse.h 265PROCFS opt_dontuse.h 266PSEUDOFS opt_dontuse.h 267SMBFS opt_dontuse.h 268TMPFS opt_dontuse.h 269UDF opt_dontuse.h 270UNIONFS opt_dontuse.h 271ZFS opt_dontuse.h 272 273# Pseudofs debugging 274PSEUDOFS_TRACE opt_pseudofs.h 275 276# In-kernel GSS-API 277KGSSAPI opt_kgssapi.h 278KGSSAPI_DEBUG opt_kgssapi.h 279 280# These static filesystems have one slightly bogus static dependency in 281# sys/i386/i386/autoconf.c. If any of these filesystems are 282# statically compiled into the kernel, code for mounting them as root 283# filesystems will be enabled - but look below. 284# NFSCL - client 285# NFSD - server 286NFSCL opt_nfs.h 287NFSD opt_nfs.h 288 289# filesystems and libiconv bridge 290CD9660_ICONV opt_dontuse.h 291MSDOSFS_ICONV opt_dontuse.h 292UDF_ICONV opt_dontuse.h 293 294# If you are following the conditions in the copyright, 295# you can enable soft-updates which will speed up a lot of thigs 296# and make the system safer from crashes at the same time. 297# otherwise a STUB module will be compiled in. 298SOFTUPDATES opt_ffs.h 299 300# On small, embedded systems, it can be useful to turn off support for 301# snapshots. It saves about 30-40k for a feature that would be lightly 302# used, if it is used at all. 303NO_FFS_SNAPSHOT opt_ffs.h 304 305# Enabling this option turns on support for Access Control Lists in UFS, 306# which can be used to support high security configurations. Depends on 307# UFS_EXTATTR. 308UFS_ACL opt_ufs.h 309 310# Enabling this option turns on support for extended attributes in UFS-based 311# filesystems, which can be used to support high security configurations 312# as well as new filesystem features. 313UFS_EXTATTR opt_ufs.h 314UFS_EXTATTR_AUTOSTART opt_ufs.h 315 316# Enable fast hash lookups for large directories on UFS-based filesystems. 317UFS_DIRHASH opt_ufs.h 318 319# Enable gjournal-based UFS journal. 320UFS_GJOURNAL opt_ufs.h 321 322# The below sentence is not in English, and neither is this one. 323# We plan to remove the static dependences above, with a 324# <filesystem>_ROOT option to control if it usable as root. This list 325# allows these options to be present in config files already (though 326# they won't make any difference yet). 327NFS_ROOT opt_nfsroot.h 328 329# SMB/CIFS requester 330NETSMB opt_netsmb.h 331 332# Enable debugnet(4) networking support. 333DEBUGNET opt_global.h 334# Enable netdump(4) client support. 335NETDUMP opt_global.h 336# Enable netgdb(4) support. 337NETGDB opt_global.h 338 339# Options used only in subr_param.c. 340HZ opt_param.h 341MAXFILES opt_param.h 342NBUF opt_param.h 343NSFBUFS opt_param.h 344VM_BCACHE_SIZE_MAX opt_param.h 345VM_SWZONE_SIZE_MAX opt_param.h 346MAXUSERS 347DFLDSIZ opt_param.h 348MAXDSIZ opt_param.h 349MAXSSIZ opt_param.h 350 351# Generic SCSI options. 352CAM_MAX_HIGHPOWER opt_cam.h 353CAMDEBUG opt_cam.h 354CAM_DEBUG_COMPILE opt_cam.h 355CAM_DEBUG_DELAY opt_cam.h 356CAM_DEBUG_BUS opt_cam.h 357CAM_DEBUG_TARGET opt_cam.h 358CAM_DEBUG_LUN opt_cam.h 359CAM_DEBUG_FLAGS opt_cam.h 360CAM_BOOT_DELAY opt_cam.h 361CAM_IOSCHED_DYNAMIC opt_cam.h 362CAM_IO_STATS opt_cam.h 363CAM_TEST_FAILURE opt_cam.h 364SCSI_DELAY opt_scsi.h 365SCSI_NO_SENSE_STRINGS opt_scsi.h 366SCSI_NO_OP_STRINGS opt_scsi.h 367 368# Options used only in cam/ata/ata_da.c 369ATA_STATIC_ID opt_ada.h 370 371# Options used only in cam/scsi/scsi_cd.c 372CHANGER_MIN_BUSY_SECONDS opt_cd.h 373CHANGER_MAX_BUSY_SECONDS opt_cd.h 374 375# Options used only in cam/scsi/scsi_da.c 376DA_TRACK_REFS opt_da.h 377 378# Options used only in cam/scsi/scsi_sa.c. 379SA_IO_TIMEOUT opt_sa.h 380SA_SPACE_TIMEOUT opt_sa.h 381SA_REWIND_TIMEOUT opt_sa.h 382SA_ERASE_TIMEOUT opt_sa.h 383SA_1FM_AT_EOD opt_sa.h 384 385# Options used only in cam/scsi/scsi_pt.c 386SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 387 388# Options used only in cam/scsi/scsi_ses.c 389SES_ENABLE_PASSTHROUGH opt_ses.h 390 391# Options used in dev/sym/ (Symbios SCSI driver). 392SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 393 # disabled:0 (default), enabled:1 394SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 395 # disabled:0, enabled:1 (default) 396SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 397 # default:8, range:[1..64] 398 399# Options used only in dev/isp/* 400ISP_TARGET_MODE opt_isp.h 401ISP_FW_CRASH_DUMP opt_isp.h 402ISP_DEFAULT_ROLES opt_isp.h 403ISP_INTERNAL_TARGET opt_isp.h 404ISP_FCTAPE_OFF opt_isp.h 405 406# Options used only in dev/iscsi 407ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 408 409# Net stuff. 410ACCEPT_FILTER_DATA 411ACCEPT_FILTER_DNS 412ACCEPT_FILTER_HTTP 413ALTQ opt_global.h 414ALTQ_CBQ opt_altq.h 415ALTQ_CDNR opt_altq.h 416ALTQ_CODEL opt_altq.h 417ALTQ_DEBUG opt_altq.h 418ALTQ_HFSC opt_altq.h 419ALTQ_FAIRQ opt_altq.h 420ALTQ_NOPCC opt_altq.h 421ALTQ_PRIQ opt_altq.h 422ALTQ_RED opt_altq.h 423ALTQ_RIO opt_altq.h 424BOOTP opt_bootp.h 425BOOTP_BLOCKSIZE opt_bootp.h 426BOOTP_COMPAT opt_bootp.h 427BOOTP_NFSROOT opt_bootp.h 428BOOTP_NFSV3 opt_bootp.h 429BOOTP_WIRED_TO opt_bootp.h 430DEVICE_POLLING 431DUMMYNET opt_ipdn.h 432RATELIMIT opt_ratelimit.h 433RATELIMIT_DEBUG opt_ratelimit.h 434INET opt_inet.h 435INET6 opt_inet6.h 436STATS opt_global.h 437IPDIVERT 438IPFILTER opt_ipfilter.h 439IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 440IPFILTER_LOG opt_ipfilter.h 441IPFILTER_LOOKUP opt_ipfilter.h 442IPFIREWALL opt_ipfw.h 443IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 444IPFIREWALL_NAT opt_ipfw.h 445IPFIREWALL_NAT64 opt_ipfw.h 446IPFIREWALL_NPTV6 opt_ipfw.h 447IPFIREWALL_VERBOSE opt_ipfw.h 448IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 449IPFIREWALL_PMOD opt_ipfw.h 450IPSEC opt_ipsec.h 451IPSEC_DEBUG opt_ipsec.h 452IPSEC_SUPPORT opt_ipsec.h 453IPSTEALTH 454KERN_TLS 455KRPC 456LIBALIAS 457LIBMCHAIN 458MBUF_PROFILING 459MBUF_STRESS_TEST 460MROUTING opt_mrouting.h 461NFSLOCKD 462PF_DEFAULT_TO_DROP opt_pf.h 463ROUTE_MPATH opt_route.h 464ROUTETABLES opt_route.h 465FIB_ALGO opt_route.h 466RSS opt_rss.h 467SLIP_IFF_OPTS opt_slip.h 468TCPDEBUG 469TCPPCAP opt_global.h 470SIFTR 471TCP_BLACKBOX opt_global.h 472TCP_HHOOK opt_inet.h 473TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading 474TCP_RFC7413 opt_inet.h 475TCP_RFC7413_MAX_KEYS opt_inet.h 476TCP_RFC7413_MAX_PSKS opt_inet.h 477TCP_SIGNATURE opt_ipsec.h 478VLAN_ARRAY opt_vlan.h 479XDR 480XBONEHACK 481 482# 483# SCTP 484# 485SCTP opt_sctp.h 486SCTP_SUPPORT opt_sctp.h 487SCTP_DEBUG opt_sctp.h # Enable debug printfs 488SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 489SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 490SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 491SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 492SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 493SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 494SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 495SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 496SCTP_LOCAL_TRACE_BUF opt_sctp.h # Use tracebuffer exported via sysctl 497SCTP_DETAILED_STR_STATS opt_sctp.h # Use per PR-SCTP policy stream stats 498# 499# 500# 501 502# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 503# Each netgraph node type can be either be compiled into the kernel 504# or loaded dynamically. To get the former, include the corresponding 505# option below. Each type has its own man page, e.g. ng_async(4). 506NETGRAPH 507NETGRAPH_DEBUG opt_netgraph.h 508NETGRAPH_ASYNC opt_netgraph.h 509NETGRAPH_ATMLLC opt_netgraph.h 510NETGRAPH_ATM_ATMPIF opt_netgraph.h 511NETGRAPH_BLUETOOTH opt_netgraph.h 512NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 513NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 514NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 515NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 516NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 517NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 518NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 519NETGRAPH_BPF opt_netgraph.h 520NETGRAPH_BRIDGE opt_netgraph.h 521NETGRAPH_CAR opt_netgraph.h 522NETGRAPH_CHECKSUM opt_netgraph.h 523NETGRAPH_CISCO opt_netgraph.h 524NETGRAPH_DEFLATE opt_netgraph.h 525NETGRAPH_DEVICE opt_netgraph.h 526NETGRAPH_ECHO opt_netgraph.h 527NETGRAPH_EIFACE opt_netgraph.h 528NETGRAPH_ETHER opt_netgraph.h 529NETGRAPH_ETHER_ECHO opt_netgraph.h 530NETGRAPH_FEC opt_netgraph.h 531NETGRAPH_FRAME_RELAY opt_netgraph.h 532NETGRAPH_GIF opt_netgraph.h 533NETGRAPH_GIF_DEMUX opt_netgraph.h 534NETGRAPH_HOLE opt_netgraph.h 535NETGRAPH_IFACE opt_netgraph.h 536NETGRAPH_IP_INPUT opt_netgraph.h 537NETGRAPH_IPFW opt_netgraph.h 538NETGRAPH_KSOCKET opt_netgraph.h 539NETGRAPH_L2TP opt_netgraph.h 540NETGRAPH_LMI opt_netgraph.h 541NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 542NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 543NETGRAPH_NAT opt_netgraph.h 544NETGRAPH_NETFLOW opt_netgraph.h 545NETGRAPH_ONE2MANY opt_netgraph.h 546NETGRAPH_PATCH opt_netgraph.h 547NETGRAPH_PIPE opt_netgraph.h 548NETGRAPH_PPP opt_netgraph.h 549NETGRAPH_PPPOE opt_netgraph.h 550NETGRAPH_PPTPGRE opt_netgraph.h 551NETGRAPH_PRED1 opt_netgraph.h 552NETGRAPH_RFC1490 opt_netgraph.h 553NETGRAPH_SOCKET opt_netgraph.h 554NETGRAPH_SPLIT opt_netgraph.h 555NETGRAPH_SPPP opt_netgraph.h 556NETGRAPH_TAG opt_netgraph.h 557NETGRAPH_TCPMSS opt_netgraph.h 558NETGRAPH_TEE opt_netgraph.h 559NETGRAPH_TTY opt_netgraph.h 560NETGRAPH_UI opt_netgraph.h 561NETGRAPH_VJC opt_netgraph.h 562NETGRAPH_VLAN opt_netgraph.h 563 564# NgATM options 565NGATM_ATM opt_netgraph.h 566NGATM_ATMBASE opt_netgraph.h 567NGATM_SSCOP opt_netgraph.h 568NGATM_SSCFU opt_netgraph.h 569NGATM_UNI opt_netgraph.h 570NGATM_CCATM opt_netgraph.h 571 572# DRM options 573DRM_DEBUG opt_drm.h 574 575TI_SF_BUF_JUMBO opt_ti.h 576TI_JUMBO_HDRSPLIT opt_ti.h 577 578# Misc debug flags. Most of these should probably be replaced with 579# 'DEBUG', and then let people recompile just the interesting modules 580# with 'make CC="cc -DDEBUG"'. 581DEBUG_1284 opt_ppb_1284.h 582LPT_DEBUG opt_lpt.h 583PLIP_DEBUG opt_plip.h 584LOCKF_DEBUG opt_debug_lockf.h 585SI_DEBUG opt_debug_si.h 586IFMEDIA_DEBUG opt_ifmedia.h 587 588# Fb options 589FB_DEBUG opt_fb.h 590 591# ppbus related options 592PERIPH_1284 opt_ppb_1284.h 593DONTPROBE_1284 opt_ppb_1284.h 594 595# smbus related options 596ENABLE_ALART opt_intpm.h 597 598# These cause changes all over the kernel 599BLKDEV_IOSIZE opt_global.h 600BURN_BRIDGES opt_global.h 601DEBUG opt_global.h 602DEBUG_LOCKS opt_global.h 603DEBUG_VFS_LOCKS opt_global.h 604DFLTPHYS opt_global.h 605DIAGNOSTIC opt_global.h 606INVARIANT_SUPPORT opt_global.h 607INVARIANTS opt_global.h 608KASSERT_PANIC_OPTIONAL opt_global.h 609MAXCPU opt_global.h 610MAXMEMDOM opt_global.h 611MAXPHYS opt_maxphys.h 612MCLSHIFT opt_global.h 613MUTEX_NOINLINE opt_global.h 614LOCK_PROFILING opt_global.h 615LOCK_PROFILING_FAST opt_global.h 616MSIZE opt_global.h 617REGRESSION opt_global.h 618RWLOCK_NOINLINE opt_global.h 619SX_NOINLINE opt_global.h 620VFS_BIO_DEBUG opt_global.h 621 622# These are VM related options 623VM_KMEM_SIZE opt_vm.h 624VM_KMEM_SIZE_SCALE opt_vm.h 625VM_KMEM_SIZE_MAX opt_vm.h 626VM_NRESERVLEVEL opt_vm.h 627VM_LEVEL_0_ORDER opt_vm.h 628NO_SWAPPING opt_vm.h 629MALLOC_MAKE_FAILURES opt_vm.h 630MALLOC_PROFILE opt_vm.h 631MALLOC_DEBUG_MAXZONES opt_vm.h 632 633# The MemGuard replacement allocator used for tamper-after-free detection 634DEBUG_MEMGUARD opt_vm.h 635 636# The RedZone malloc(9) protection 637DEBUG_REDZONE opt_vm.h 638 639# Standard SMP options 640EARLY_AP_STARTUP opt_global.h 641SMP opt_global.h 642NUMA opt_global.h 643 644# Size of the kernel message buffer 645MSGBUF_SIZE opt_msgbuf.h 646 647# NFS options 648NFS_MINATTRTIMO opt_nfs.h 649NFS_MAXATTRTIMO opt_nfs.h 650NFS_MINDIRATTRTIMO opt_nfs.h 651NFS_MAXDIRATTRTIMO opt_nfs.h 652NFS_DEBUG opt_nfs.h 653 654# TMPFS options 655TMPFS_PAGES_MINRESERVED opt_tmpfs.h 656 657# Options for uart(4) 658UART_PPS_ON_CTS opt_uart.h 659UART_POLL_FREQ opt_uart.h 660UART_DEV_TOLERANCE_PCT opt_uart.h 661 662# options for bus/device framework 663BUS_DEBUG opt_bus.h 664 665# options for USB support 666USB_DEBUG opt_usb.h 667USB_HOST_ALIGN opt_usb.h 668USB_REQ_DEBUG opt_usb.h 669USB_TEMPLATE opt_usb.h 670USB_VERBOSE opt_usb.h 671USB_DMA_SINGLE_ALLOC opt_usb.h 672USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 673U3G_DEBUG opt_u3g.h 674UKBD_DFLT_KEYMAP opt_ukbd.h 675UPLCOM_INTR_INTERVAL opt_uplcom.h 676UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 677UVSCOM_INTR_INTERVAL opt_uvscom.h 678 679# options for the Realtek rtwn driver 680RTWN_DEBUG opt_rtwn.h 681RTWN_WITHOUT_UCODE opt_rtwn.h 682 683# Embedded system options 684INIT_PATH 685 686ROOTDEVNAME 687 688FDC_DEBUG opt_fdc.h 689PCFCLOCK_VERBOSE opt_pcfclock.h 690PCFCLOCK_MAX_RETRIES opt_pcfclock.h 691 692KTR opt_global.h 693KTR_ALQ opt_ktr.h 694KTR_MASK opt_ktr.h 695KTR_CPUMASK opt_ktr.h 696KTR_COMPILE opt_global.h 697KTR_BOOT_ENTRIES opt_global.h 698KTR_ENTRIES opt_global.h 699KTR_VERBOSE opt_ktr.h 700WITNESS opt_global.h 701WITNESS_KDB opt_witness.h 702WITNESS_NO_VNODE opt_witness.h 703WITNESS_SKIPSPIN opt_witness.h 704WITNESS_COUNT opt_witness.h 705OPENSOLARIS_WITNESS opt_global.h 706 707EPOCH_TRACE opt_global.h 708 709# options for ACPI support 710ACPI_DEBUG opt_acpi.h 711ACPI_MAX_TASKS opt_acpi.h 712ACPI_MAX_THREADS opt_acpi.h 713DEV_ACPI opt_acpi.h 714ACPI_EARLY_EPYC_WAR opt_acpi.h 715 716# options for IOMMU support 717IOMMU opt_iommu.h 718 719# ISA support 720DEV_ISA opt_isa.h 721ISAPNP opt_isa.h 722 723# various 'device presence' options. 724DEV_BPF opt_bpf.h 725DEV_CARP opt_carp.h 726DEV_NETMAP opt_global.h 727DEV_PCI opt_pci.h 728DEV_PF opt_pf.h 729DEV_PFLOG opt_pf.h 730DEV_PFSYNC opt_pf.h 731DEV_SPLASH opt_splash.h 732DEV_VLAN opt_vlan.h 733 734# bce driver 735BCE_DEBUG opt_bce.h 736BCE_NVRAM_WRITE_SUPPORT opt_bce.h 737 738SOCKBUF_DEBUG opt_global.h 739 740 741# options for hifn driver 742HIFN_DEBUG opt_hifn.h 743HIFN_RNDTEST opt_hifn.h 744 745# options for safenet driver 746SAFE_DEBUG opt_safe.h 747SAFE_NO_RNG opt_safe.h 748SAFE_RNDTEST opt_safe.h 749 750# syscons/vt options 751MAXCONS opt_syscons.h 752SC_ALT_MOUSE_IMAGE opt_syscons.h 753SC_CUT_SPACES2TABS opt_syscons.h 754SC_CUT_SEPCHARS opt_syscons.h 755SC_DEBUG_LEVEL opt_syscons.h 756SC_DFLT_FONT opt_syscons.h 757SC_DFLT_TERM opt_syscons.h 758SC_DISABLE_KDBKEY opt_syscons.h 759SC_DISABLE_REBOOT opt_syscons.h 760SC_HISTORY_SIZE opt_syscons.h 761SC_KERNEL_CONS_ATTR opt_syscons.h 762SC_KERNEL_CONS_ATTRS opt_syscons.h 763SC_KERNEL_CONS_REV_ATTR opt_syscons.h 764SC_MOUSE_CHAR opt_syscons.h 765SC_NO_CUTPASTE opt_syscons.h 766SC_NO_FONT_LOADING opt_syscons.h 767SC_NO_HISTORY opt_syscons.h 768SC_NO_MODE_CHANGE opt_syscons.h 769SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 770SC_NO_SYSMOUSE opt_syscons.h 771SC_NO_TERM_DUMB opt_syscons.h 772SC_NO_TERM_SC opt_syscons.h 773SC_NO_TERM_TEKEN opt_syscons.h 774SC_NORM_ATTR opt_syscons.h 775SC_NORM_REV_ATTR opt_syscons.h 776SC_PIXEL_MODE opt_syscons.h 777SC_RENDER_DEBUG opt_syscons.h 778SC_TWOBUTTON_MOUSE opt_syscons.h 779VT_ALT_TO_ESC_HACK opt_syscons.h 780VT_FB_MAX_WIDTH opt_syscons.h 781VT_FB_MAX_HEIGHT opt_syscons.h 782VT_MAXWINDOWS opt_syscons.h 783VT_TWOBUTTON_MOUSE opt_syscons.h 784DEV_SC opt_syscons.h 785DEV_VT opt_syscons.h 786 787# teken terminal emulator options 788TEKEN_CONS25 opt_teken.h 789TEKEN_UTF8 opt_teken.h 790TERMINAL_KERN_ATTR opt_teken.h 791TERMINAL_NORM_ATTR opt_teken.h 792 793# options for printf 794PRINTF_BUFR_SIZE opt_printf.h 795BOOT_TAG opt_printf.h 796BOOT_TAG_SZ opt_printf.h 797 798# kbd options 799KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 800KBD_INSTALL_CDEV opt_kbd.h 801KBD_MAXRETRY opt_kbd.h 802KBD_MAXWAIT opt_kbd.h 803KBD_RESETDELAY opt_kbd.h 804KBDIO_DEBUG opt_kbd.h 805 806KBDMUX_DFLT_KEYMAP opt_kbdmux.h 807 808# options for the Atheros driver 809ATH_DEBUG opt_ath.h 810ATH_TXBUF opt_ath.h 811ATH_RXBUF opt_ath.h 812ATH_DIAGAPI opt_ath.h 813ATH_TX99_DIAG opt_ath.h 814ATH_ENABLE_11N opt_ath.h 815ATH_ENABLE_DFS opt_ath.h 816ATH_EEPROM_FIRMWARE opt_ath.h 817ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 818ATH_DEBUG_ALQ opt_ath.h 819ATH_KTR_INTR_DEBUG opt_ath.h 820 821# options for the Atheros hal 822# XXX For now, this breaks non-AR9130 chipsets, so only use it 823# XXX when actually targeting AR9130. 824AH_SUPPORT_AR9130 opt_ah.h 825 826# This is required for AR933x SoC support 827AH_SUPPORT_AR9330 opt_ah.h 828AH_SUPPORT_AR9340 opt_ah.h 829AH_SUPPORT_QCA9530 opt_ah.h 830AH_SUPPORT_QCA9550 opt_ah.h 831 832AH_DEBUG opt_ah.h 833AH_ASSERT opt_ah.h 834AH_DEBUG_ALQ opt_ah.h 835AH_REGOPS_FUNC opt_ah.h 836AH_WRITE_REGDOMAIN opt_ah.h 837AH_DEBUG_COUNTRY opt_ah.h 838AH_WRITE_EEPROM opt_ah.h 839AH_PRIVATE_DIAG opt_ah.h 840AH_NEED_DESC_SWAP opt_ah.h 841AH_USE_INIPDGAIN opt_ah.h 842AH_MAXCHAN opt_ah.h 843AH_RXCFG_SDMAMW_4BYTES opt_ah.h 844AH_INTERRUPT_DEBUGGING opt_ah.h 845# AR5416 and later interrupt mitigation 846# XXX do not use this for AR9130 847AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 848 849# options for the Altera mSGDMA driver (altera_msgdma) 850ALTERA_MSGDMA_DESC_STD opt_altera_msgdma.h 851ALTERA_MSGDMA_DESC_EXT opt_altera_msgdma.h 852ALTERA_MSGDMA_DESC_PF_STD opt_altera_msgdma.h 853ALTERA_MSGDMA_DESC_PF_EXT opt_altera_msgdma.h 854 855# options for the Broadcom BCM43xx driver (bwi) 856BWI_DEBUG opt_bwi.h 857BWI_DEBUG_VERBOSE opt_bwi.h 858 859# options for the Brodacom BCM43xx driver (bwn) 860BWN_DEBUG opt_bwn.h 861BWN_GPL_PHY opt_bwn.h 862BWN_USE_SIBA opt_bwn.h 863 864# Options for the SIBA driver 865SIBA_DEBUG opt_siba.h 866 867# options for the Marvell 8335 wireless driver 868MALO_DEBUG opt_malo.h 869MALO_TXBUF opt_malo.h 870MALO_RXBUF opt_malo.h 871 872# options for the Marvell wireless driver 873MWL_DEBUG opt_mwl.h 874MWL_TXBUF opt_mwl.h 875MWL_RXBUF opt_mwl.h 876MWL_DIAGAPI opt_mwl.h 877MWL_AGGR_SIZE opt_mwl.h 878MWL_TX_NODROP opt_mwl.h 879 880# Options for the Marvell NETA driver 881MVNETA_MULTIQUEUE opt_mvneta.h 882MVNETA_KTR opt_mvneta.h 883 884# Options for the Intel 802.11ac wireless driver 885IWM_DEBUG opt_iwm.h 886 887# Options for the Intel 802.11n wireless driver 888IWN_DEBUG opt_iwn.h 889 890# Options for the Intel 3945ABG wireless driver 891WPI_DEBUG opt_wpi.h 892 893# dcons options 894DCONS_BUF_SIZE opt_dcons.h 895DCONS_POLL_HZ opt_dcons.h 896DCONS_FORCE_CONSOLE opt_dcons.h 897DCONS_FORCE_GDB opt_dcons.h 898 899# HWPMC options 900HWPMC_DEBUG opt_global.h 901HWPMC_HOOKS 902HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h 903 904# 802.11 support layer 905IEEE80211_DEBUG opt_wlan.h 906IEEE80211_DEBUG_REFCNT opt_wlan.h 907IEEE80211_SUPPORT_MESH opt_wlan.h 908IEEE80211_SUPPORT_SUPERG opt_wlan.h 909IEEE80211_SUPPORT_TDMA opt_wlan.h 910IEEE80211_ALQ opt_wlan.h 911IEEE80211_DFS_DEBUG opt_wlan.h 912 913# 802.11 TDMA support 914TDMA_SLOTLEN_DEFAULT opt_tdma.h 915TDMA_SLOTCNT_DEFAULT opt_tdma.h 916TDMA_BINTVAL_DEFAULT opt_tdma.h 917TDMA_TXRATE_11B_DEFAULT opt_tdma.h 918TDMA_TXRATE_11G_DEFAULT opt_tdma.h 919TDMA_TXRATE_11A_DEFAULT opt_tdma.h 920TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 921TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 922TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 923TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 924TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 925 926# VideoMode 927PICKMODE_DEBUG opt_videomode.h 928 929# Network stack virtualization options 930VIMAGE opt_global.h 931VNET_DEBUG opt_global.h 932 933# Common Flash Interface (CFI) options 934CFI_SUPPORT_STRATAFLASH opt_cfi.h 935CFI_ARMEDANDDANGEROUS opt_cfi.h 936CFI_HARDWAREBYTESWAP opt_cfi.h 937 938# Sound options 939SND_DEBUG opt_snd.h 940SND_DIAGNOSTIC opt_snd.h 941SND_FEEDER_MULTIFORMAT opt_snd.h 942SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 943SND_FEEDER_RATE_HP opt_snd.h 944SND_PCM_64 opt_snd.h 945SND_OLDSTEREO opt_snd.h 946 947X86BIOS 948 949# Flattened device tree options 950FDT opt_platform.h 951FDT_DTB_STATIC opt_platform.h 952 953# OFED Infiniband stack 954OFED opt_ofed.h 955OFED_DEBUG_INIT opt_ofed.h 956SDP opt_ofed.h 957SDP_DEBUG opt_ofed.h 958IPOIB opt_ofed.h 959IPOIB_DEBUG opt_ofed.h 960IPOIB_CM opt_ofed.h 961 962# Resource Accounting 963RACCT opt_global.h 964RACCT_DEFAULT_TO_DISABLED opt_global.h 965 966# Resource Limits 967RCTL opt_global.h 968 969# Random number generator(s) 970# Alternative RNG algorithm. 971RANDOM_FENESTRASX opt_global.h 972# With this, no entropy processor is loaded, but the entropy 973# harvesting infrastructure is present. This means an entropy 974# processor may be loaded as a module. 975RANDOM_LOADABLE opt_global.h 976# This turns on high-rate and potentially expensive harvesting in 977# the uma slab allocator. 978RANDOM_ENABLE_UMA opt_global.h 979RANDOM_ENABLE_ETHER opt_global.h 980 981# This options turns TPM into entropy source. 982TPM_HARVEST opt_tpm.h 983 984# BHND(4) driver 985BHND_LOGLEVEL opt_global.h 986 987# GPIO and child devices 988GPIO_SPI_DEBUG opt_gpio.h 989 990# SPI devices 991SPIGEN_LEGACY_CDEVNAME opt_spi.h 992 993# etherswitch(4) driver 994RTL8366_SOFT_RESET opt_etherswitch.h 995 996# evdev protocol support 997EVDEV_SUPPORT opt_evdev.h 998EVDEV_DEBUG opt_evdev.h 999UINPUT_DEBUG opt_evdev.h 1000 1001# Hyper-V network driver 1002HN_DEBUG opt_hn.h 1003 1004# CAM-based MMC stack 1005MMCCAM 1006# Encrypted kernel crash dumps 1007EKCD opt_ekcd.h 1008 1009# NVME options 1010NVME_USE_NVD opt_nvme.h 1011NVME_2X_RESET opt_nvme.h 1012 1013# amdsbwd options 1014AMDSBWD_DEBUG opt_amdsbwd.h 1015 1016# gcov support 1017GCOV opt_global.h 1018LINDEBUGFS 1019 1020# options for HID support 1021HID_DEBUG opt_hid.h 1022IICHID_DEBUG opt_hid.h 1023IICHID_SAMPLING opt_hid.h 1024HKBD_DFLT_KEYMAP opt_hkbd.h 1025HIDRAW_MAKE_UHID_ALIAS opt_hid.h 1026 1027# kenv options 1028# The early kernel environment (loader environment, config(8)-provided static) 1029# is typically cleared after the dynamic environment comes up to ensure that 1030# we're not inadvertently holding on to 'secret' values in these stale envs. 1031# This option is insecure except in controlled environments where the static 1032# environment's contents are known to be safe. 1033PRESERVE_EARLY_KENV opt_global.h 1034