1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affects only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AACRAID_DEBUG opt_aacraid.h 35AHC_ALLOW_MEMIO opt_aic7xxx.h 36AHC_TMODE_ENABLE opt_aic7xxx.h 37AHC_DUMP_EEPROM opt_aic7xxx.h 38AHC_DEBUG opt_aic7xxx.h 39AHC_DEBUG_OPTS opt_aic7xxx.h 40AHC_REG_PRETTY_PRINT opt_aic7xxx.h 41AHD_DEBUG opt_aic79xx.h 42AHD_DEBUG_OPTS opt_aic79xx.h 43AHD_TMODE_ENABLE opt_aic79xx.h 44AHD_REG_PRETTY_PRINT opt_aic79xx.h 45ADW_ALLOW_MEMIO opt_adw.h 46 47TWA_DEBUG opt_twa.h 48TWA_FLASH_FIRMWARE opt_twa.h 49 50# Debugging options. 51ALT_BREAK_TO_DEBUGGER opt_kdb.h 52BREAK_TO_DEBUGGER opt_kdb.h 53DDB 54DDB_BUFR_SIZE opt_ddb.h 55DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 56DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 57DDB_CTF opt_ddb.h 58DDB_NUMSYM opt_ddb.h 59GDB 60KDB opt_global.h 61KDB_TRACE opt_kdb.h 62KDB_UNATTENDED opt_kdb.h 63KLD_DEBUG opt_kld.h 64SYSCTL_DEBUG opt_sysctl.h 65EARLY_PRINTF opt_global.h 66TEXTDUMP_PREFERRED opt_ddb.h 67TEXTDUMP_VERBOSE opt_ddb.h 68 69# Miscellaneous options. 70ADAPTIVE_LOCKMGRS 71ALQ 72ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h 73ATSE_CFI_HACK opt_cfi.h 74AUDIT opt_global.h 75BOOTHOWTO opt_global.h 76BOOTVERBOSE opt_global.h 77CALLOUT_PROFILING 78CAPABILITIES opt_capsicum.h 79CAPABILITY_MODE opt_capsicum.h 80COMPAT_43 opt_compat.h 81COMPAT_43TTY opt_compat.h 82COMPAT_FREEBSD4 opt_compat.h 83COMPAT_FREEBSD5 opt_compat.h 84COMPAT_FREEBSD6 opt_compat.h 85COMPAT_FREEBSD7 opt_compat.h 86COMPAT_FREEBSD9 opt_compat.h 87COMPAT_FREEBSD10 opt_compat.h 88COMPILING_LINT opt_global.h 89COMPRESS_USER_CORES opt_core.h 90CY_PCI_FASTINTR 91DEADLKRES opt_watchdog.h 92DIRECTIO 93FILEMON opt_dontuse.h 94FFCLOCK 95FULL_PREEMPTION opt_sched.h 96IMAGACT_BINMISC opt_dontuse.h 97IPI_PREEMPTION opt_sched.h 98GEOM_AES opt_geom.h 99GEOM_BDE opt_geom.h 100GEOM_BSD opt_geom.h 101GEOM_CACHE opt_geom.h 102GEOM_CONCAT opt_geom.h 103GEOM_ELI opt_geom.h 104GEOM_FOX opt_geom.h 105GEOM_GATE opt_geom.h 106GEOM_JOURNAL opt_geom.h 107GEOM_LABEL opt_geom.h 108GEOM_LABEL_GPT opt_geom.h 109GEOM_LINUX_LVM opt_geom.h 110GEOM_MBR opt_geom.h 111GEOM_MIRROR opt_geom.h 112GEOM_MULTIPATH opt_geom.h 113GEOM_NOP opt_geom.h 114GEOM_PART_APM opt_geom.h 115GEOM_PART_BSD opt_geom.h 116GEOM_PART_BSD64 opt_geom.h 117GEOM_PART_EBR opt_geom.h 118GEOM_PART_EBR_COMPAT opt_geom.h 119GEOM_PART_GPT opt_geom.h 120GEOM_PART_LDM opt_geom.h 121GEOM_PART_MBR opt_geom.h 122GEOM_PART_PC98 opt_geom.h 123GEOM_PART_VTOC8 opt_geom.h 124GEOM_PC98 opt_geom.h 125GEOM_RAID opt_geom.h 126GEOM_RAID3 opt_geom.h 127GEOM_SHSEC opt_geom.h 128GEOM_STRIPE opt_geom.h 129GEOM_SUNLABEL opt_geom.h 130GEOM_UNCOMPRESS opt_geom.h 131GEOM_UZIP opt_geom.h 132GEOM_VINUM opt_geom.h 133GEOM_VIRSTOR opt_geom.h 134GEOM_VOL opt_geom.h 135GEOM_ZERO opt_geom.h 136KDTRACE_HOOKS opt_global.h 137KDTRACE_FRAME opt_kdtrace.h 138KN_HASHSIZE opt_kqueue.h 139KSTACK_MAX_PAGES 140KSTACK_PAGES 141KSTACK_USAGE_PROF 142KTRACE 143KTRACE_REQUEST_POOL opt_ktrace.h 144LIBICONV 145MAC opt_global.h 146MAC_BIBA opt_dontuse.h 147MAC_BSDEXTENDED opt_dontuse.h 148MAC_IFOFF opt_dontuse.h 149MAC_LOMAC opt_dontuse.h 150MAC_MLS opt_dontuse.h 151MAC_NONE opt_dontuse.h 152MAC_PARTITION opt_dontuse.h 153MAC_PORTACL opt_dontuse.h 154MAC_SEEOTHERUIDS opt_dontuse.h 155MAC_STATIC opt_mac.h 156MAC_STUB opt_dontuse.h 157MAC_TEST opt_dontuse.h 158MD_ROOT opt_md.h 159MD_ROOT_FSTYPE opt_md.h 160MD_ROOT_SIZE opt_md.h 161MFI_DEBUG opt_mfi.h 162MFI_DECODE_LOG opt_mfi.h 163MPROF_BUFFERS opt_mprof.h 164MPROF_HASH_SIZE opt_mprof.h 165NEW_PCIB opt_global.h 166NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 167NO_ADAPTIVE_RWLOCKS 168NO_ADAPTIVE_SX 169NO_EVENTTIMERS opt_timer.h 170NO_SYSCTL_DESCR opt_global.h 171NSWBUF_MIN opt_swap.h 172MBUF_PACKET_ZONE_DISABLE opt_global.h 173PANIC_REBOOT_WAIT_TIME opt_panic.h 174PPC_DEBUG opt_ppc.h 175PPC_PROBE_CHIPSET opt_ppc.h 176PPS_SYNC opt_ntp.h 177PREEMPTION opt_sched.h 178QUOTA 179SCHED_4BSD opt_sched.h 180SCHED_STATS opt_sched.h 181SCHED_ULE opt_sched.h 182SLEEPQUEUE_PROFILING 183SLHCI_DEBUG opt_slhci.h 184SPX_HACK 185STACK opt_stack.h 186SUIDDIR 187MSGMNB opt_sysvipc.h 188MSGMNI opt_sysvipc.h 189MSGSEG opt_sysvipc.h 190MSGSSZ opt_sysvipc.h 191MSGTQL opt_sysvipc.h 192SEMMNI opt_sysvipc.h 193SEMMNS opt_sysvipc.h 194SEMMNU opt_sysvipc.h 195SEMMSL opt_sysvipc.h 196SEMOPM opt_sysvipc.h 197SEMUME opt_sysvipc.h 198SHMALL opt_sysvipc.h 199SHMMAX opt_sysvipc.h 200SHMMAXPGS opt_sysvipc.h 201SHMMIN opt_sysvipc.h 202SHMMNI opt_sysvipc.h 203SHMSEG opt_sysvipc.h 204SYSVMSG opt_sysvipc.h 205SYSVSEM opt_sysvipc.h 206SYSVSHM opt_sysvipc.h 207SW_WATCHDOG opt_watchdog.h 208TURNSTILE_PROFILING 209UMTX_PROFILING 210VFS_AIO 211VERBOSE_SYSINIT opt_global.h 212WLCACHE opt_wavelan.h 213WLDEBUG opt_wavelan.h 214 215# POSIX kernel options 216P1003_1B_MQUEUE opt_posix.h 217P1003_1B_SEMAPHORES opt_posix.h 218_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 219 220# Do we want the config file compiled into the kernel? 221INCLUDE_CONFIG_FILE opt_config.h 222 223# Options for static filesystems. These should only be used at config 224# time, since the corresponding lkms cannot work if there are any static 225# dependencies. Unusability is enforced by hiding the defines for the 226# options in a never-included header. 227AUTOFS opt_dontuse.h 228CD9660 opt_dontuse.h 229EXT2FS opt_dontuse.h 230FDESCFS opt_dontuse.h 231FFS opt_dontuse.h 232FUSE opt_dontuse.h 233MSDOSFS opt_dontuse.h 234NANDFS opt_dontuse.h 235NULLFS opt_dontuse.h 236PROCFS opt_dontuse.h 237PSEUDOFS opt_dontuse.h 238REISERFS opt_dontuse.h 239SMBFS opt_dontuse.h 240TMPFS opt_dontuse.h 241UDF opt_dontuse.h 242UNIONFS opt_dontuse.h 243ZFS opt_dontuse.h 244 245# Pseudofs debugging 246PSEUDOFS_TRACE opt_pseudofs.h 247 248# In-kernel GSS-API 249KGSSAPI opt_kgssapi.h 250KGSSAPI_DEBUG opt_kgssapi.h 251 252# These static filesystems have one slightly bogus static dependency in 253# sys/i386/i386/autoconf.c. If any of these filesystems are 254# statically compiled into the kernel, code for mounting them as root 255# filesystems will be enabled - but look below. 256# NFSCL - client 257# NFSD - server 258NFSCL opt_nfs.h 259NFSD opt_nfs.h 260 261# filesystems and libiconv bridge 262CD9660_ICONV opt_dontuse.h 263MSDOSFS_ICONV opt_dontuse.h 264UDF_ICONV opt_dontuse.h 265 266# If you are following the conditions in the copyright, 267# you can enable soft-updates which will speed up a lot of thigs 268# and make the system safer from crashes at the same time. 269# otherwise a STUB module will be compiled in. 270SOFTUPDATES opt_ffs.h 271 272# On small, embedded systems, it can be useful to turn off support for 273# snapshots. It saves about 30-40k for a feature that would be lightly 274# used, if it is used at all. 275NO_FFS_SNAPSHOT opt_ffs.h 276 277# Enabling this option turns on support for Access Control Lists in UFS, 278# which can be used to support high security configurations. Depends on 279# UFS_EXTATTR. 280UFS_ACL opt_ufs.h 281 282# Enabling this option turns on support for extended attributes in UFS-based 283# filesystems, which can be used to support high security configurations 284# as well as new filesystem features. 285UFS_EXTATTR opt_ufs.h 286UFS_EXTATTR_AUTOSTART opt_ufs.h 287 288# Enable fast hash lookups for large directories on UFS-based filesystems. 289UFS_DIRHASH opt_ufs.h 290 291# Enable gjournal-based UFS journal. 292UFS_GJOURNAL opt_ufs.h 293 294# The below sentence is not in English, and neither is this one. 295# We plan to remove the static dependences above, with a 296# <filesystem>_ROOT option to control if it usable as root. This list 297# allows these options to be present in config files already (though 298# they won't make any difference yet). 299NFS_ROOT opt_nfsroot.h 300 301# SMB/CIFS requester 302NETSMB opt_netsmb.h 303 304# Options used only in subr_param.c. 305HZ opt_param.h 306MAXFILES opt_param.h 307NBUF opt_param.h 308NSFBUFS opt_param.h 309VM_BCACHE_SIZE_MAX opt_param.h 310VM_SWZONE_SIZE_MAX opt_param.h 311MAXUSERS 312DFLDSIZ opt_param.h 313MAXDSIZ opt_param.h 314MAXSSIZ opt_param.h 315 316# Generic SCSI options. 317CAM_MAX_HIGHPOWER opt_cam.h 318CAMDEBUG opt_cam.h 319CAM_DEBUG_COMPILE opt_cam.h 320CAM_DEBUG_DELAY opt_cam.h 321CAM_DEBUG_BUS opt_cam.h 322CAM_DEBUG_TARGET opt_cam.h 323CAM_DEBUG_LUN opt_cam.h 324CAM_DEBUG_FLAGS opt_cam.h 325CAM_BOOT_DELAY opt_cam.h 326SCSI_DELAY opt_scsi.h 327SCSI_NO_SENSE_STRINGS opt_scsi.h 328SCSI_NO_OP_STRINGS opt_scsi.h 329 330# Options used only in cam/ata/ata_da.c 331ADA_TEST_FAILURE opt_ada.h 332ATA_STATIC_ID opt_ada.h 333 334# Options used only in cam/scsi/scsi_cd.c 335CHANGER_MIN_BUSY_SECONDS opt_cd.h 336CHANGER_MAX_BUSY_SECONDS opt_cd.h 337 338# Options used only in cam/scsi/scsi_sa.c. 339SA_IO_TIMEOUT opt_sa.h 340SA_SPACE_TIMEOUT opt_sa.h 341SA_REWIND_TIMEOUT opt_sa.h 342SA_ERASE_TIMEOUT opt_sa.h 343SA_1FM_AT_EOD opt_sa.h 344 345# Options used only in cam/scsi/scsi_pt.c 346SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 347 348# Options used only in cam/scsi/scsi_ses.c 349SES_ENABLE_PASSTHROUGH opt_ses.h 350 351# Options used in dev/sym/ (Symbios SCSI driver). 352SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 353 # Allows the ncr to take precedence 354 # 1 (1<<0) -> 810a, 860 355 # 2 (1<<1) -> 825a, 875, 885, 895 356 # 4 (1<<2) -> 895a, 896, 1510d 357SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 358 # disabled:0 (default), enabled:1 359SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 360 # disabled:0, enabled:1 (default) 361SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 362 # default:8, range:[1..64] 363 364# Options used only in dev/ncr/* 365SCSI_NCR_DEBUG opt_ncr.h 366SCSI_NCR_MAX_SYNC opt_ncr.h 367SCSI_NCR_MAX_WIDE opt_ncr.h 368SCSI_NCR_MYADDR opt_ncr.h 369 370# Options used only in dev/isp/* 371ISP_TARGET_MODE opt_isp.h 372ISP_FW_CRASH_DUMP opt_isp.h 373ISP_DEFAULT_ROLES opt_isp.h 374ISP_INTERNAL_TARGET opt_isp.h 375 376# Options used only in dev/iscsi 377ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 378 379# Net stuff. 380ACCEPT_FILTER_DATA 381ACCEPT_FILTER_DNS 382ACCEPT_FILTER_HTTP 383ALTQ opt_global.h 384ALTQ_CBQ opt_altq.h 385ALTQ_CDNR opt_altq.h 386ALTQ_DEBUG opt_altq.h 387ALTQ_HFSC opt_altq.h 388ALTQ_NOPCC opt_altq.h 389ALTQ_PRIQ opt_altq.h 390ALTQ_RED opt_altq.h 391ALTQ_RIO opt_altq.h 392BOOTP opt_bootp.h 393BOOTP_BLOCKSIZE opt_bootp.h 394BOOTP_COMPAT opt_bootp.h 395BOOTP_NFSROOT opt_bootp.h 396BOOTP_NFSV3 opt_bootp.h 397BOOTP_WIRED_TO opt_bootp.h 398DEVICE_POLLING 399DUMMYNET opt_ipdn.h 400INET opt_inet.h 401INET6 opt_inet6.h 402IPDIVERT 403IPFILTER opt_ipfilter.h 404IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 405IPFILTER_LOG opt_ipfilter.h 406IPFILTER_LOOKUP opt_ipfilter.h 407IPFIREWALL opt_ipfw.h 408IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 409IPFIREWALL_NAT opt_ipfw.h 410IPFIREWALL_VERBOSE opt_ipfw.h 411IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 412IPSEC opt_ipsec.h 413IPSEC_DEBUG opt_ipsec.h 414IPSEC_FILTERTUNNEL opt_ipsec.h 415IPSEC_NAT_T opt_ipsec.h 416IPSTEALTH 417KRPC 418LIBALIAS 419LIBMBPOOL 420LIBMCHAIN 421MBUF_PROFILING 422MBUF_STRESS_TEST 423MROUTING opt_mrouting.h 424NFSLOCKD 425PCBGROUP opt_pcbgroup.h 426PF_DEFAULT_TO_DROP opt_pf.h 427RADIX_MPATH opt_mpath.h 428ROUTETABLES opt_route.h 429RSS opt_rss.h 430SLIP_IFF_OPTS opt_slip.h 431TCPDEBUG 432TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading 433TCP_SIGNATURE opt_inet.h 434VLAN_ARRAY opt_vlan.h 435XBONEHACK 436FLOWTABLE opt_route.h 437FLOWTABLE_HASH_ALL opt_route.h 438 439# 440# SCTP 441# 442SCTP opt_sctp.h 443SCTP_DEBUG opt_sctp.h # Enable debug printfs 444SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril 445SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 446SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 447SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 448SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 449SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 450SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 451SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 452SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 453SCTP_LOCAL_TRACE_BUF opt_sctp.h # Use tracebuffer exported via sysctl 454SCTP_DETAILED_STR_STATS opt_sctp.h # Use per PR-SCTP policy stream stats 455# 456# 457# 458 459# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 460# Each netgraph node type can be either be compiled into the kernel 461# or loaded dynamically. To get the former, include the corresponding 462# option below. Each type has its own man page, e.g. ng_async(4). 463NETGRAPH 464NETGRAPH_DEBUG opt_netgraph.h 465NETGRAPH_ASYNC opt_netgraph.h 466NETGRAPH_ATMLLC opt_netgraph.h 467NETGRAPH_ATM_ATMPIF opt_netgraph.h 468NETGRAPH_BLUETOOTH opt_netgraph.h 469NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 470NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 471NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 472NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 473NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 474NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 475NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 476NETGRAPH_BPF opt_netgraph.h 477NETGRAPH_BRIDGE opt_netgraph.h 478NETGRAPH_CAR opt_netgraph.h 479NETGRAPH_CISCO opt_netgraph.h 480NETGRAPH_DEFLATE opt_netgraph.h 481NETGRAPH_DEVICE opt_netgraph.h 482NETGRAPH_ECHO opt_netgraph.h 483NETGRAPH_EIFACE opt_netgraph.h 484NETGRAPH_ETHER opt_netgraph.h 485NETGRAPH_ETHER_ECHO opt_netgraph.h 486NETGRAPH_FEC opt_netgraph.h 487NETGRAPH_FRAME_RELAY opt_netgraph.h 488NETGRAPH_GIF opt_netgraph.h 489NETGRAPH_GIF_DEMUX opt_netgraph.h 490NETGRAPH_HOLE opt_netgraph.h 491NETGRAPH_IFACE opt_netgraph.h 492NETGRAPH_IP_INPUT opt_netgraph.h 493NETGRAPH_IPFW opt_netgraph.h 494NETGRAPH_KSOCKET opt_netgraph.h 495NETGRAPH_L2TP opt_netgraph.h 496NETGRAPH_LMI opt_netgraph.h 497# MPPC compression requires proprietary files (not included) 498NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 499NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 500NETGRAPH_NAT opt_netgraph.h 501NETGRAPH_NETFLOW opt_netgraph.h 502NETGRAPH_ONE2MANY opt_netgraph.h 503NETGRAPH_PATCH opt_netgraph.h 504NETGRAPH_PIPE opt_netgraph.h 505NETGRAPH_PPP opt_netgraph.h 506NETGRAPH_PPPOE opt_netgraph.h 507NETGRAPH_PPTPGRE opt_netgraph.h 508NETGRAPH_PRED1 opt_netgraph.h 509NETGRAPH_RFC1490 opt_netgraph.h 510NETGRAPH_SOCKET opt_netgraph.h 511NETGRAPH_SPLIT opt_netgraph.h 512NETGRAPH_SPPP opt_netgraph.h 513NETGRAPH_TAG opt_netgraph.h 514NETGRAPH_TCPMSS opt_netgraph.h 515NETGRAPH_TEE opt_netgraph.h 516NETGRAPH_TTY opt_netgraph.h 517NETGRAPH_UI opt_netgraph.h 518NETGRAPH_VJC opt_netgraph.h 519NETGRAPH_VLAN opt_netgraph.h 520 521# NgATM options 522NGATM_ATM opt_netgraph.h 523NGATM_ATMBASE opt_netgraph.h 524NGATM_SSCOP opt_netgraph.h 525NGATM_SSCFU opt_netgraph.h 526NGATM_UNI opt_netgraph.h 527NGATM_CCATM opt_netgraph.h 528 529# DRM options 530DRM_DEBUG opt_drm.h 531 532TI_SF_BUF_JUMBO opt_ti.h 533TI_JUMBO_HDRSPLIT opt_ti.h 534 535# XXX Conflict: # of devices vs network protocol (Native ATM). 536# This makes "atm.h" unusable. 537NATM 538 539# DPT driver debug flags 540DPT_MEASURE_PERFORMANCE opt_dpt.h 541DPT_RESET_HBA opt_dpt.h 542 543# Misc debug flags. Most of these should probably be replaced with 544# 'DEBUG', and then let people recompile just the interesting modules 545# with 'make CC="cc -DDEBUG"'. 546CLUSTERDEBUG opt_debug_cluster.h 547DEBUG_1284 opt_ppb_1284.h 548VP0_DEBUG opt_vpo.h 549LPT_DEBUG opt_lpt.h 550PLIP_DEBUG opt_plip.h 551LOCKF_DEBUG opt_debug_lockf.h 552SI_DEBUG opt_debug_si.h 553 554# Fb options 555FB_DEBUG opt_fb.h 556FB_INSTALL_CDEV opt_fb.h 557 558# ppbus related options 559PERIPH_1284 opt_ppb_1284.h 560DONTPROBE_1284 opt_ppb_1284.h 561 562# smbus related options 563ENABLE_ALART opt_intpm.h 564 565# These cause changes all over the kernel 566BLKDEV_IOSIZE opt_global.h 567BURN_BRIDGES opt_global.h 568DEBUG opt_global.h 569DEBUG_LOCKS opt_global.h 570DEBUG_VFS_LOCKS opt_global.h 571DFLTPHYS opt_global.h 572DIAGNOSTIC opt_global.h 573INVARIANT_SUPPORT opt_global.h 574INVARIANTS opt_global.h 575MAXCPU opt_global.h 576MAXMEMDOM opt_global.h 577MAXPHYS opt_global.h 578MCLSHIFT opt_global.h 579MUTEX_DEBUG opt_global.h 580MUTEX_NOINLINE opt_global.h 581LOCK_PROFILING opt_global.h 582LOCK_PROFILING_FAST opt_global.h 583MSIZE opt_global.h 584REGRESSION opt_global.h 585RWLOCK_NOINLINE opt_global.h 586SX_NOINLINE opt_global.h 587VFS_BIO_DEBUG opt_global.h 588 589# These are VM related options 590VM_KMEM_SIZE opt_vm.h 591VM_KMEM_SIZE_SCALE opt_vm.h 592VM_KMEM_SIZE_MAX opt_vm.h 593VM_NRESERVLEVEL opt_vm.h 594VM_LEVEL_0_ORDER opt_vm.h 595NO_SWAPPING opt_vm.h 596MALLOC_MAKE_FAILURES opt_vm.h 597MALLOC_PROFILE opt_vm.h 598MALLOC_DEBUG_MAXZONES opt_vm.h 599 600# The MemGuard replacement allocator used for tamper-after-free detection 601DEBUG_MEMGUARD opt_vm.h 602 603# The RedZone malloc(9) protection 604DEBUG_REDZONE opt_vm.h 605 606# Standard SMP options 607SMP opt_global.h 608 609# Size of the kernel message buffer 610MSGBUF_SIZE opt_msgbuf.h 611 612# NFS options 613NFS_MINATTRTIMO opt_nfs.h 614NFS_MAXATTRTIMO opt_nfs.h 615NFS_MINDIRATTRTIMO opt_nfs.h 616NFS_MAXDIRATTRTIMO opt_nfs.h 617NFS_DEBUG opt_nfs.h 618 619# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 620OVERRIDE_CARD opt_bktr.h 621OVERRIDE_TUNER opt_bktr.h 622OVERRIDE_DBX opt_bktr.h 623OVERRIDE_MSP opt_bktr.h 624BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 625BROOKTREE_ALLOC_PAGES opt_bktr.h 626BKTR_OVERRIDE_CARD opt_bktr.h 627BKTR_OVERRIDE_TUNER opt_bktr.h 628BKTR_OVERRIDE_DBX opt_bktr.h 629BKTR_OVERRIDE_MSP opt_bktr.h 630BKTR_SYSTEM_DEFAULT opt_bktr.h 631BKTR_ALLOC_PAGES opt_bktr.h 632BKTR_USE_PLL opt_bktr.h 633BKTR_GPIO_ACCESS opt_bktr.h 634BKTR_NO_MSP_RESET opt_bktr.h 635BKTR_430_FX_MODE opt_bktr.h 636BKTR_SIS_VIA_MODE opt_bktr.h 637BKTR_USE_FREEBSD_SMBUS opt_bktr.h 638BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 639 640# Options for uart(4) 641UART_PPS_ON_CTS opt_uart.h 642UART_POLL_FREQ opt_uart.h 643 644# options for bus/device framework 645BUS_DEBUG opt_bus.h 646 647# options for USB support 648USB_DEBUG opt_usb.h 649USB_HOST_ALIGN opt_usb.h 650USB_REQ_DEBUG opt_usb.h 651USB_TEMPLATE opt_usb.h 652USB_VERBOSE opt_usb.h 653USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 654U3G_DEBUG opt_u3g.h 655UKBD_DFLT_KEYMAP opt_ukbd.h 656UPLCOM_INTR_INTERVAL opt_uplcom.h 657UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 658UVSCOM_INTR_INTERVAL opt_uvscom.h 659 660# Embedded system options 661INIT_PATH 662 663ROOTDEVNAME 664 665FDC_DEBUG opt_fdc.h 666PCFCLOCK_VERBOSE opt_pcfclock.h 667PCFCLOCK_MAX_RETRIES opt_pcfclock.h 668 669KTR opt_global.h 670KTR_ALQ opt_ktr.h 671KTR_MASK opt_ktr.h 672KTR_CPUMASK opt_ktr.h 673KTR_COMPILE opt_global.h 674KTR_BOOT_ENTRIES opt_global.h 675KTR_ENTRIES opt_global.h 676KTR_VERBOSE opt_ktr.h 677WITNESS opt_global.h 678WITNESS_KDB opt_witness.h 679WITNESS_NO_VNODE opt_witness.h 680WITNESS_SKIPSPIN opt_witness.h 681WITNESS_COUNT opt_witness.h 682OPENSOLARIS_WITNESS opt_global.h 683 684# options for ACPI support 685ACPI_DEBUG opt_acpi.h 686ACPI_MAX_TASKS opt_acpi.h 687ACPI_MAX_THREADS opt_acpi.h 688ACPI_DMAR opt_acpi.h 689 690# ISA support 691DEV_ISA opt_isa.h 692ISAPNP opt_isa.h 693 694# various 'device presence' options. 695DEV_BPF opt_bpf.h 696DEV_CARP opt_carp.h 697DEV_ENC opt_enc.h 698DEV_MCA opt_mca.h 699DEV_NETMAP opt_global.h 700DEV_PCI opt_pci.h 701DEV_PF opt_pf.h 702DEV_PFLOG opt_pf.h 703DEV_PFSYNC opt_pf.h 704DEV_SPLASH opt_splash.h 705DEV_VLAN opt_vlan.h 706 707# EISA support 708DEV_EISA opt_eisa.h 709EISA_SLOTS opt_eisa.h 710 711# ed driver 712ED_HPP opt_ed.h 713ED_3C503 opt_ed.h 714ED_SIC opt_ed.h 715 716# bce driver 717BCE_DEBUG opt_bce.h 718BCE_NVRAM_WRITE_SUPPORT opt_bce.h 719 720SOCKBUF_DEBUG opt_global.h 721 722 723# options for ubsec driver 724UBSEC_DEBUG opt_ubsec.h 725UBSEC_RNDTEST opt_ubsec.h 726UBSEC_NO_RNG opt_ubsec.h 727 728# options for hifn driver 729HIFN_DEBUG opt_hifn.h 730HIFN_RNDTEST opt_hifn.h 731 732# options for safenet driver 733SAFE_DEBUG opt_safe.h 734SAFE_NO_RNG opt_safe.h 735SAFE_RNDTEST opt_safe.h 736 737# syscons/vt options 738MAXCONS opt_syscons.h 739SC_ALT_MOUSE_IMAGE opt_syscons.h 740SC_CUT_SPACES2TABS opt_syscons.h 741SC_CUT_SEPCHARS opt_syscons.h 742SC_DEBUG_LEVEL opt_syscons.h 743SC_DFLT_FONT opt_syscons.h 744SC_DISABLE_KDBKEY opt_syscons.h 745SC_DISABLE_REBOOT opt_syscons.h 746SC_HISTORY_SIZE opt_syscons.h 747SC_KERNEL_CONS_ATTR opt_syscons.h 748SC_KERNEL_CONS_REV_ATTR opt_syscons.h 749SC_MOUSE_CHAR opt_syscons.h 750SC_NO_CUTPASTE opt_syscons.h 751SC_NO_FONT_LOADING opt_syscons.h 752SC_NO_HISTORY opt_syscons.h 753SC_NO_MODE_CHANGE opt_syscons.h 754SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 755SC_NO_SYSMOUSE opt_syscons.h 756SC_NORM_ATTR opt_syscons.h 757SC_NORM_REV_ATTR opt_syscons.h 758SC_PIXEL_MODE opt_syscons.h 759SC_RENDER_DEBUG opt_syscons.h 760SC_TWOBUTTON_MOUSE opt_syscons.h 761VT_ALT_TO_ESC_HACK opt_syscons.h 762VT_FB_DEFAULT_WIDTH opt_syscons.h 763VT_FB_DEFAULT_HEIGHT opt_syscons.h 764VT_MAXWINDOWS opt_syscons.h 765VT_TWOBUTTON_MOUSE opt_syscons.h 766DEV_SC opt_syscons.h 767DEV_VT opt_syscons.h 768 769# teken terminal emulator options 770TEKEN_CONS25 opt_teken.h 771TEKEN_UTF8 opt_teken.h 772TERMINAL_KERN_ATTR opt_teken.h 773TERMINAL_NORM_ATTR opt_teken.h 774 775# options for printf 776PRINTF_BUFR_SIZE opt_printf.h 777 778# kbd options 779KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 780KBD_INSTALL_CDEV opt_kbd.h 781KBD_MAXRETRY opt_kbd.h 782KBD_MAXWAIT opt_kbd.h 783KBD_RESETDELAY opt_kbd.h 784KBDIO_DEBUG opt_kbd.h 785 786# options for the Atheros driver 787ATH_DEBUG opt_ath.h 788ATH_TXBUF opt_ath.h 789ATH_RXBUF opt_ath.h 790ATH_DIAGAPI opt_ath.h 791ATH_TX99_DIAG opt_ath.h 792ATH_ENABLE_11N opt_ath.h 793ATH_ENABLE_DFS opt_ath.h 794ATH_EEPROM_FIRMWARE opt_ath.h 795ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 796ATH_DEBUG_ALQ opt_ath.h 797ATH_KTR_INTR_DEBUG opt_ath.h 798 799# options for the Atheros hal 800AH_SUPPORT_AR5416 opt_ah.h 801# XXX For now, this breaks non-AR9130 chipsets, so only use it 802# XXX when actually targetting AR9130. 803AH_SUPPORT_AR9130 opt_ah.h 804 805# This is required for AR933x SoC support 806AH_SUPPORT_AR9330 opt_ah.h 807AH_SUPPORT_AR9340 opt_ah.h 808AH_SUPPORT_QCA9550 opt_ah.h 809 810AH_DEBUG opt_ah.h 811AH_ASSERT opt_ah.h 812AH_DEBUG_ALQ opt_ah.h 813AH_REGOPS_FUNC opt_ah.h 814AH_WRITE_REGDOMAIN opt_ah.h 815AH_DEBUG_COUNTRY opt_ah.h 816AH_WRITE_EEPROM opt_ah.h 817AH_PRIVATE_DIAG opt_ah.h 818AH_NEED_DESC_SWAP opt_ah.h 819AH_USE_INIPDGAIN opt_ah.h 820AH_MAXCHAN opt_ah.h 821AH_RXCFG_SDMAMW_4BYTES opt_ah.h 822AH_INTERRUPT_DEBUGGING opt_ah.h 823# AR5416 and later interrupt mitigation 824# XXX do not use this for AR9130 825AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 826 827# options for the Broadcom BCM43xx driver (bwi) 828BWI_DEBUG opt_bwi.h 829BWI_DEBUG_VERBOSE opt_bwi.h 830 831# options for the Marvell 8335 wireless driver 832MALO_DEBUG opt_malo.h 833MALO_TXBUF opt_malo.h 834MALO_RXBUF opt_malo.h 835 836# options for the Marvell wireless driver 837MWL_DEBUG opt_mwl.h 838MWL_TXBUF opt_mwl.h 839MWL_RXBUF opt_mwl.h 840MWL_DIAGAPI opt_mwl.h 841MWL_AGGR_SIZE opt_mwl.h 842MWL_TX_NODROP opt_mwl.h 843 844# Options for the Intel 802.11n wireless driver 845IWN_DEBUG opt_iwn.h 846 847# dcons options 848DCONS_BUF_SIZE opt_dcons.h 849DCONS_POLL_HZ opt_dcons.h 850DCONS_FORCE_CONSOLE opt_dcons.h 851DCONS_FORCE_GDB opt_dcons.h 852 853# HWPMC options 854HWPMC_HOOKS 855HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h 856 857# XBOX options for FreeBSD/i386, but some files are MI 858XBOX opt_xbox.h 859 860# Interrupt filtering 861INTR_FILTER 862 863# 802.11 support layer 864IEEE80211_DEBUG opt_wlan.h 865IEEE80211_DEBUG_REFCNT opt_wlan.h 866IEEE80211_AMPDU_AGE opt_wlan.h 867IEEE80211_SUPPORT_MESH opt_wlan.h 868IEEE80211_SUPPORT_SUPERG opt_wlan.h 869IEEE80211_SUPPORT_TDMA opt_wlan.h 870IEEE80211_ALQ opt_wlan.h 871IEEE80211_DFS_DEBUG opt_wlan.h 872 873# 802.11 TDMA support 874TDMA_SLOTLEN_DEFAULT opt_tdma.h 875TDMA_SLOTCNT_DEFAULT opt_tdma.h 876TDMA_BINTVAL_DEFAULT opt_tdma.h 877TDMA_TXRATE_11B_DEFAULT opt_tdma.h 878TDMA_TXRATE_11G_DEFAULT opt_tdma.h 879TDMA_TXRATE_11A_DEFAULT opt_tdma.h 880TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 881TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 882TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 883TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 884TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 885 886# Network stack virtualization options 887VIMAGE opt_global.h 888VNET_DEBUG opt_global.h 889 890# Common Flash Interface (CFI) options 891CFI_SUPPORT_STRATAFLASH opt_cfi.h 892CFI_ARMEDANDDANGEROUS opt_cfi.h 893 894# Sound options 895SND_DEBUG opt_snd.h 896SND_DIAGNOSTIC opt_snd.h 897SND_FEEDER_MULTIFORMAT opt_snd.h 898SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 899SND_FEEDER_RATE_HP opt_snd.h 900SND_PCM_64 opt_snd.h 901SND_OLDSTEREO opt_snd.h 902 903X86BIOS 904 905# Flattened device tree options 906FDT opt_platform.h 907FDT_DTB_STATIC opt_platform.h 908 909# OFED Infiniband stack 910OFED opt_ofed.h 911OFED_DEBUG_INIT opt_ofed.h 912SDP opt_ofed.h 913SDP_DEBUG opt_ofed.h 914IPOIB opt_ofed.h 915IPOIB_DEBUG opt_ofed.h 916IPOIB_CM opt_ofed.h 917 918# Resource Accounting 919RACCT opt_global.h 920 921# Resource Limits 922RCTL opt_global.h 923 924# Random number generator(s) 925RANDOM_YARROW opt_random.h 926RANDOM_FORTUNA opt_random.h 927RANDOM_DEBUG opt_random.h 928