xref: /freebsd/sys/conf/options (revision b2d48be1bc7df45ddd13b143a160d0acb5a383c5)
1# $FreeBSD$
2#
3#        On the handling of kernel options
4#
5# All kernel options should be listed in NOTES, with suitable
6# descriptions.  Negative options (options that make some code not
7# compile) should be commented out; LINT (generated from NOTES) should
8# compile as much code as possible.  Try to structure option-using
9# code so that a single option only switch code on, or only switch
10# code off, to make it possible to have a full compile-test.  If
11# necessary, you can check for COMPILING_LINT to get maximum code
12# coverage.
13#
14# All new options shall also be listed in either "conf/options" or
15# "conf/options.<machine>".  Options that affect a single source-file
16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17# that affect multiple files should either go in "opt_global.h" if
18# this is a kernel-wide option (used just about everywhere), or in
19# "opt_<option-name-in-lower-case>.h" if it affects only some files.
20# Note that the effect of listing only an option without a
21# header-file-name in conf/options (and cousins) is that the last
22# convention is followed.
23#
24# This handling scheme is not yet fully implemented.
25#
26#
27# Format of this file:
28# Option name	filename
29#
30# If filename is missing, the default is
31# opt_<name-of-option-in-lower-case>.h
32
33AAC_DEBUG		opt_aac.h
34AACRAID_DEBUG		opt_aacraid.h
35AHC_ALLOW_MEMIO		opt_aic7xxx.h
36AHC_TMODE_ENABLE	opt_aic7xxx.h
37AHC_DUMP_EEPROM		opt_aic7xxx.h
38AHC_DEBUG		opt_aic7xxx.h
39AHC_DEBUG_OPTS		opt_aic7xxx.h
40AHC_REG_PRETTY_PRINT	opt_aic7xxx.h
41AHD_DEBUG		opt_aic79xx.h
42AHD_DEBUG_OPTS		opt_aic79xx.h
43AHD_TMODE_ENABLE	opt_aic79xx.h
44AHD_REG_PRETTY_PRINT	opt_aic79xx.h
45ADW_ALLOW_MEMIO		opt_adw.h
46
47TWA_DEBUG		opt_twa.h
48TWA_FLASH_FIRMWARE	opt_twa.h
49
50# Debugging options.
51ALT_BREAK_TO_DEBUGGER	opt_kdb.h
52BREAK_TO_DEBUGGER	opt_kdb.h
53DDB
54DDB_BUFR_SIZE	opt_ddb.h
55DDB_CAPTURE_DEFAULTBUFSIZE	opt_ddb.h
56DDB_CAPTURE_MAXBUFSIZE	opt_ddb.h
57DDB_CTF		opt_ddb.h
58DDB_NUMSYM	opt_ddb.h
59GDB
60KDB		opt_global.h
61KDB_TRACE	opt_kdb.h
62KDB_UNATTENDED	opt_kdb.h
63KLD_DEBUG	opt_kld.h
64SYSCTL_DEBUG	opt_sysctl.h
65EARLY_PRINTF	opt_global.h
66TEXTDUMP_PREFERRED	opt_ddb.h
67TEXTDUMP_VERBOSE	opt_ddb.h
68
69# Miscellaneous options.
70ADAPTIVE_LOCKMGRS
71ALQ
72ALTERA_SDCARD_FAST_SIM	opt_altera_sdcard.h
73ATSE_CFI_HACK	opt_cfi.h
74AUDIT		opt_global.h
75BOOTHOWTO	opt_global.h
76BOOTVERBOSE	opt_global.h
77CALLOUT_PROFILING
78CAPABILITIES	opt_capsicum.h
79CAPABILITY_MODE	opt_capsicum.h
80COMPAT_43	opt_compat.h
81COMPAT_43TTY	opt_compat.h
82COMPAT_FREEBSD4	opt_compat.h
83COMPAT_FREEBSD5	opt_compat.h
84COMPAT_FREEBSD6	opt_compat.h
85COMPAT_FREEBSD7	opt_compat.h
86COMPAT_FREEBSD9	opt_compat.h
87COMPAT_FREEBSD10	opt_compat.h
88COMPAT_CLOUDABI64	opt_dontuse.h
89COMPAT_LINUXAPI	opt_compat.h
90COMPILING_LINT	opt_global.h
91CY_PCI_FASTINTR
92DEADLKRES	opt_watchdog.h
93DIRECTIO
94FILEMON		opt_dontuse.h
95FFCLOCK
96FULL_PREEMPTION	opt_sched.h
97GZIO		opt_gzio.h
98IMAGACT_BINMISC		opt_dontuse.h
99IPI_PREEMPTION	opt_sched.h
100GEOM_AES	opt_geom.h
101GEOM_BDE	opt_geom.h
102GEOM_BSD	opt_geom.h
103GEOM_CACHE	opt_geom.h
104GEOM_CONCAT	opt_geom.h
105GEOM_ELI	opt_geom.h
106GEOM_FOX	opt_geom.h
107GEOM_GATE	opt_geom.h
108GEOM_JOURNAL	opt_geom.h
109GEOM_LABEL	opt_geom.h
110GEOM_LABEL_GPT	opt_geom.h
111GEOM_LINUX_LVM	opt_geom.h
112GEOM_MAP	opt_geom.h
113GEOM_MBR	opt_geom.h
114GEOM_MIRROR	opt_geom.h
115GEOM_MULTIPATH	opt_geom.h
116GEOM_NOP	opt_geom.h
117GEOM_PART_APM	opt_geom.h
118GEOM_PART_BSD	opt_geom.h
119GEOM_PART_BSD64	opt_geom.h
120GEOM_PART_EBR	opt_geom.h
121GEOM_PART_EBR_COMPAT	opt_geom.h
122GEOM_PART_GPT	opt_geom.h
123GEOM_PART_LDM	opt_geom.h
124GEOM_PART_MBR	opt_geom.h
125GEOM_PART_PC98	opt_geom.h
126GEOM_PART_VTOC8	opt_geom.h
127GEOM_PC98	opt_geom.h
128GEOM_RAID	opt_geom.h
129GEOM_RAID3	opt_geom.h
130GEOM_SHSEC	opt_geom.h
131GEOM_STRIPE	opt_geom.h
132GEOM_SUNLABEL	opt_geom.h
133GEOM_UNCOMPRESS	opt_geom.h
134GEOM_UNCOMPRESS_DEBUG	opt_geom.h
135GEOM_UZIP	opt_geom.h
136GEOM_VINUM	opt_geom.h
137GEOM_VIRSTOR	opt_geom.h
138GEOM_VOL	opt_geom.h
139GEOM_ZERO	opt_geom.h
140KDTRACE_HOOKS	opt_global.h
141KDTRACE_FRAME	opt_kdtrace.h
142KN_HASHSIZE	opt_kqueue.h
143KSTACK_MAX_PAGES
144KSTACK_PAGES
145KSTACK_USAGE_PROF
146KTRACE
147KTRACE_REQUEST_POOL	opt_ktrace.h
148LIBICONV
149MAC		opt_global.h
150MAC_BIBA	opt_dontuse.h
151MAC_BSDEXTENDED	opt_dontuse.h
152MAC_IFOFF	opt_dontuse.h
153MAC_LOMAC	opt_dontuse.h
154MAC_MLS		opt_dontuse.h
155MAC_NONE	opt_dontuse.h
156MAC_PARTITION	opt_dontuse.h
157MAC_PORTACL	opt_dontuse.h
158MAC_SEEOTHERUIDS	opt_dontuse.h
159MAC_STATIC	opt_mac.h
160MAC_STUB	opt_dontuse.h
161MAC_TEST	opt_dontuse.h
162MD_ROOT		opt_md.h
163MD_ROOT_FSTYPE	opt_md.h
164MD_ROOT_SIZE	opt_md.h
165MFI_DEBUG	opt_mfi.h
166MFI_DECODE_LOG	opt_mfi.h
167MPROF_BUFFERS	opt_mprof.h
168MPROF_HASH_SIZE	opt_mprof.h
169NEW_PCIB	opt_global.h
170NO_ADAPTIVE_MUTEXES	opt_adaptive_mutexes.h
171NO_ADAPTIVE_RWLOCKS
172NO_ADAPTIVE_SX
173NO_EVENTTIMERS		opt_timer.h
174NO_SYSCTL_DESCR	opt_global.h
175NSWBUF_MIN	opt_swap.h
176MBUF_PACKET_ZONE_DISABLE	opt_global.h
177PANIC_REBOOT_WAIT_TIME	opt_panic.h
178PCI_IOV		opt_global.h
179PPC_DEBUG	opt_ppc.h
180PPC_PROBE_CHIPSET	opt_ppc.h
181PPS_SYNC	opt_ntp.h
182PREEMPTION	opt_sched.h
183QUOTA
184SCHED_4BSD	opt_sched.h
185SCHED_STATS	opt_sched.h
186SCHED_ULE	opt_sched.h
187SLEEPQUEUE_PROFILING
188SLHCI_DEBUG	opt_slhci.h
189SPX_HACK
190STACK		opt_stack.h
191SUIDDIR
192MSGMNB		opt_sysvipc.h
193MSGMNI		opt_sysvipc.h
194MSGSEG		opt_sysvipc.h
195MSGSSZ		opt_sysvipc.h
196MSGTQL		opt_sysvipc.h
197SEMMNI		opt_sysvipc.h
198SEMMNS		opt_sysvipc.h
199SEMMNU		opt_sysvipc.h
200SEMMSL		opt_sysvipc.h
201SEMOPM		opt_sysvipc.h
202SEMUME		opt_sysvipc.h
203SHMALL		opt_sysvipc.h
204SHMMAX		opt_sysvipc.h
205SHMMAXPGS	opt_sysvipc.h
206SHMMIN		opt_sysvipc.h
207SHMMNI		opt_sysvipc.h
208SHMSEG		opt_sysvipc.h
209SYSVMSG		opt_sysvipc.h
210SYSVSEM		opt_sysvipc.h
211SYSVSHM		opt_sysvipc.h
212SW_WATCHDOG	opt_watchdog.h
213TURNSTILE_PROFILING
214UMTX_PROFILING
215VFS_AIO
216VERBOSE_SYSINIT
217WLCACHE		opt_wavelan.h
218WLDEBUG		opt_wavelan.h
219
220# POSIX kernel options
221P1003_1B_MQUEUE			opt_posix.h
222P1003_1B_SEMAPHORES		opt_posix.h
223_KPOSIX_PRIORITY_SCHEDULING	opt_posix.h
224
225# Do we want the config file compiled into the kernel?
226INCLUDE_CONFIG_FILE	opt_config.h
227
228# Options for static filesystems.  These should only be used at config
229# time, since the corresponding lkms cannot work if there are any static
230# dependencies.  Unusability is enforced by hiding the defines for the
231# options in a never-included header.
232AUTOFS		opt_dontuse.h
233CD9660		opt_dontuse.h
234EXT2FS		opt_dontuse.h
235FDESCFS		opt_dontuse.h
236FFS		opt_dontuse.h
237FUSE		opt_dontuse.h
238MSDOSFS		opt_dontuse.h
239NANDFS		opt_dontuse.h
240NULLFS		opt_dontuse.h
241PROCFS		opt_dontuse.h
242PSEUDOFS	opt_dontuse.h
243REISERFS	opt_dontuse.h
244SMBFS		opt_dontuse.h
245TMPFS		opt_dontuse.h
246UDF		opt_dontuse.h
247UNIONFS		opt_dontuse.h
248ZFS		opt_dontuse.h
249
250# Pseudofs debugging
251PSEUDOFS_TRACE	opt_pseudofs.h
252
253# In-kernel GSS-API
254KGSSAPI		opt_kgssapi.h
255KGSSAPI_DEBUG	opt_kgssapi.h
256
257# These static filesystems have one slightly bogus static dependency in
258# sys/i386/i386/autoconf.c.  If any of these filesystems are
259# statically compiled into the kernel, code for mounting them as root
260# filesystems will be enabled - but look below.
261# NFSCL - client
262# NFSD - server
263NFSCL		opt_nfs.h
264NFSD		opt_nfs.h
265
266# filesystems and libiconv bridge
267CD9660_ICONV	opt_dontuse.h
268MSDOSFS_ICONV	opt_dontuse.h
269UDF_ICONV	opt_dontuse.h
270
271# If you are following the conditions in the copyright,
272# you can enable soft-updates which will speed up a lot of thigs
273# and make the system safer from crashes at the same time.
274# otherwise a STUB module will be compiled in.
275SOFTUPDATES	opt_ffs.h
276
277# On small, embedded systems, it can be useful to turn off support for
278# snapshots.  It saves about 30-40k for a feature that would be lightly
279# used, if it is used at all.
280NO_FFS_SNAPSHOT	opt_ffs.h
281
282# Enabling this option turns on support for Access Control Lists in UFS,
283# which can be used to support high security configurations.  Depends on
284# UFS_EXTATTR.
285UFS_ACL		opt_ufs.h
286
287# Enabling this option turns on support for extended attributes in UFS-based
288# filesystems, which can be used to support high security configurations
289# as well as new filesystem features.
290UFS_EXTATTR	opt_ufs.h
291UFS_EXTATTR_AUTOSTART	opt_ufs.h
292
293# Enable fast hash lookups for large directories on UFS-based filesystems.
294UFS_DIRHASH	opt_ufs.h
295
296# Enable gjournal-based UFS journal.
297UFS_GJOURNAL	opt_ufs.h
298
299# The below sentence is not in English, and neither is this one.
300# We plan to remove the static dependences above, with a
301# <filesystem>_ROOT option to control if it usable as root.  This list
302# allows these options to be present in config files already (though
303# they won't make any difference yet).
304NFS_ROOT	opt_nfsroot.h
305
306# SMB/CIFS requester
307NETSMB		opt_netsmb.h
308
309# Options used only in subr_param.c.
310HZ		opt_param.h
311MAXFILES	opt_param.h
312NBUF		opt_param.h
313NSFBUFS		opt_param.h
314VM_BCACHE_SIZE_MAX	opt_param.h
315VM_SWZONE_SIZE_MAX	opt_param.h
316MAXUSERS
317DFLDSIZ		opt_param.h
318MAXDSIZ		opt_param.h
319MAXSSIZ		opt_param.h
320
321# Generic SCSI options.
322CAM_MAX_HIGHPOWER	opt_cam.h
323CAMDEBUG		opt_cam.h
324CAM_DEBUG_COMPILE	opt_cam.h
325CAM_DEBUG_DELAY		opt_cam.h
326CAM_DEBUG_BUS		opt_cam.h
327CAM_DEBUG_TARGET	opt_cam.h
328CAM_DEBUG_LUN		opt_cam.h
329CAM_DEBUG_FLAGS		opt_cam.h
330CAM_BOOT_DELAY		opt_cam.h
331SCSI_DELAY		opt_scsi.h
332SCSI_NO_SENSE_STRINGS	opt_scsi.h
333SCSI_NO_OP_STRINGS	opt_scsi.h
334
335# Options used only in cam/ata/ata_da.c
336ADA_TEST_FAILURE	opt_ada.h
337ATA_STATIC_ID		opt_ada.h
338
339# Options used only in cam/scsi/scsi_cd.c
340CHANGER_MIN_BUSY_SECONDS	opt_cd.h
341CHANGER_MAX_BUSY_SECONDS	opt_cd.h
342
343# Options used only in cam/scsi/scsi_sa.c.
344SA_IO_TIMEOUT		opt_sa.h
345SA_SPACE_TIMEOUT	opt_sa.h
346SA_REWIND_TIMEOUT	opt_sa.h
347SA_ERASE_TIMEOUT	opt_sa.h
348SA_1FM_AT_EOD		opt_sa.h
349
350# Options used only in cam/scsi/scsi_pt.c
351SCSI_PT_DEFAULT_TIMEOUT	opt_pt.h
352
353# Options used only in cam/scsi/scsi_ses.c
354SES_ENABLE_PASSTHROUGH	opt_ses.h
355
356# Options used in dev/sym/ (Symbios SCSI driver).
357SYM_SETUP_LP_PROBE_MAP	opt_sym.h	#-Low Priority Probe Map (bits)
358					# Allows the ncr to take precedence
359					# 1 (1<<0) -> 810a, 860
360					# 2 (1<<1) -> 825a, 875, 885, 895
361					# 4 (1<<2) -> 895a, 896, 1510d
362SYM_SETUP_SCSI_DIFF	opt_sym.h	#-HVD support for 825a, 875, 885
363					# disabled:0 (default), enabled:1
364SYM_SETUP_PCI_PARITY	opt_sym.h	#-PCI parity checking
365					# disabled:0, enabled:1 (default)
366SYM_SETUP_MAX_LUN	opt_sym.h	#-Number of LUNs supported
367					# default:8, range:[1..64]
368
369# Options used only in dev/ncr/*
370SCSI_NCR_DEBUG		opt_ncr.h
371SCSI_NCR_MAX_SYNC	opt_ncr.h
372SCSI_NCR_MAX_WIDE	opt_ncr.h
373SCSI_NCR_MYADDR		opt_ncr.h
374
375# Options used only in dev/isp/*
376ISP_TARGET_MODE		opt_isp.h
377ISP_FW_CRASH_DUMP	opt_isp.h
378ISP_DEFAULT_ROLES	opt_isp.h
379ISP_INTERNAL_TARGET	opt_isp.h
380
381# Options used only in dev/iscsi
382ISCSI_INITIATOR_DEBUG	opt_iscsi_initiator.h
383
384# Net stuff.
385ACCEPT_FILTER_DATA
386ACCEPT_FILTER_DNS
387ACCEPT_FILTER_HTTP
388ALTQ			opt_global.h
389ALTQ_CBQ		opt_altq.h
390ALTQ_CDNR		opt_altq.h
391ALTQ_CODEL		opt_altq.h
392ALTQ_DEBUG		opt_altq.h
393ALTQ_HFSC		opt_altq.h
394ALTQ_FAIRQ		opt_altq.h
395ALTQ_NOPCC		opt_altq.h
396ALTQ_PRIQ		opt_altq.h
397ALTQ_RED		opt_altq.h
398ALTQ_RIO		opt_altq.h
399BOOTP			opt_bootp.h
400BOOTP_BLOCKSIZE		opt_bootp.h
401BOOTP_COMPAT		opt_bootp.h
402BOOTP_NFSROOT		opt_bootp.h
403BOOTP_NFSV3		opt_bootp.h
404BOOTP_WIRED_TO		opt_bootp.h
405DEVICE_POLLING
406DUMMYNET		opt_ipdn.h
407INET			opt_inet.h
408INET6			opt_inet6.h
409IPDIVERT
410IPFILTER		opt_ipfilter.h
411IPFILTER_DEFAULT_BLOCK	opt_ipfilter.h
412IPFILTER_LOG		opt_ipfilter.h
413IPFILTER_LOOKUP		opt_ipfilter.h
414IPFIREWALL		opt_ipfw.h
415IPFIREWALL_DEFAULT_TO_ACCEPT	opt_ipfw.h
416IPFIREWALL_NAT		opt_ipfw.h
417IPFIREWALL_VERBOSE	opt_ipfw.h
418IPFIREWALL_VERBOSE_LIMIT	opt_ipfw.h
419IPSEC			opt_ipsec.h
420IPSEC_DEBUG		opt_ipsec.h
421IPSEC_FILTERTUNNEL	opt_ipsec.h
422IPSEC_NAT_T		opt_ipsec.h
423IPSTEALTH
424KRPC
425LIBALIAS
426LIBMBPOOL
427LIBMCHAIN
428MBUF_PROFILING
429MBUF_STRESS_TEST
430MROUTING		opt_mrouting.h
431NFSLOCKD
432PCBGROUP		opt_pcbgroup.h
433PF_DEFAULT_TO_DROP	opt_pf.h
434RADIX_MPATH		opt_mpath.h
435ROUTETABLES		opt_route.h
436RSS			opt_rss.h
437SLIP_IFF_OPTS		opt_slip.h
438TCPDEBUG
439SIFTR
440TCP_OFFLOAD		opt_inet.h # Enable code to dispatch TCP offloading
441TCP_SIGNATURE		opt_inet.h
442VLAN_ARRAY		opt_vlan.h
443XBONEHACK
444FLOWTABLE		opt_route.h
445FLOWTABLE_HASH_ALL	opt_route.h
446
447#
448# SCTP
449#
450SCTP			opt_sctp.h
451SCTP_DEBUG		opt_sctp.h # Enable debug printfs
452SCTP_WITH_NO_CSUM	opt_sctp.h # Use this at your peril
453SCTP_LOCK_LOGGING	opt_sctp.h # Log to KTR lock activity
454SCTP_MBUF_LOGGING	opt_sctp.h # Log to KTR general mbuf aloc/free
455SCTP_MBCNT_LOGGING	opt_sctp.h # Log to KTR mbcnt activity
456SCTP_PACKET_LOGGING	opt_sctp.h # Log to a packet buffer last N packets
457SCTP_LTRACE_CHUNKS	opt_sctp.h # Log to KTR chunks processed
458SCTP_LTRACE_ERRORS	opt_sctp.h # Log to KTR error returns.
459SCTP_USE_PERCPU_STAT	opt_sctp.h # Use per cpu stats.
460SCTP_MCORE_INPUT	opt_sctp.h # Have multiple input threads for input mbufs
461SCTP_LOCAL_TRACE_BUF	opt_sctp.h # Use tracebuffer exported via sysctl
462SCTP_DETAILED_STR_STATS	opt_sctp.h # Use per PR-SCTP policy stream stats
463#
464#
465#
466
467# Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
468# Each netgraph node type can be either be compiled into the kernel
469# or loaded dynamically. To get the former, include the corresponding
470# option below. Each type has its own man page, e.g. ng_async(4).
471NETGRAPH
472NETGRAPH_DEBUG		opt_netgraph.h
473NETGRAPH_ASYNC		opt_netgraph.h
474NETGRAPH_ATMLLC		opt_netgraph.h
475NETGRAPH_ATM_ATMPIF	opt_netgraph.h
476NETGRAPH_BLUETOOTH	opt_netgraph.h
477NETGRAPH_BLUETOOTH_BT3C	opt_netgraph.h
478NETGRAPH_BLUETOOTH_H4	opt_netgraph.h
479NETGRAPH_BLUETOOTH_HCI	opt_netgraph.h
480NETGRAPH_BLUETOOTH_L2CAP	opt_netgraph.h
481NETGRAPH_BLUETOOTH_SOCKET	opt_netgraph.h
482NETGRAPH_BLUETOOTH_UBT	opt_netgraph.h
483NETGRAPH_BLUETOOTH_UBTBCMFW	opt_netgraph.h
484NETGRAPH_BPF		opt_netgraph.h
485NETGRAPH_BRIDGE		opt_netgraph.h
486NETGRAPH_CAR		opt_netgraph.h
487NETGRAPH_CISCO		opt_netgraph.h
488NETGRAPH_DEFLATE	opt_netgraph.h
489NETGRAPH_DEVICE		opt_netgraph.h
490NETGRAPH_ECHO		opt_netgraph.h
491NETGRAPH_EIFACE		opt_netgraph.h
492NETGRAPH_ETHER		opt_netgraph.h
493NETGRAPH_ETHER_ECHO	opt_netgraph.h
494NETGRAPH_FEC		opt_netgraph.h
495NETGRAPH_FRAME_RELAY	opt_netgraph.h
496NETGRAPH_GIF		opt_netgraph.h
497NETGRAPH_GIF_DEMUX	opt_netgraph.h
498NETGRAPH_HOLE		opt_netgraph.h
499NETGRAPH_IFACE		opt_netgraph.h
500NETGRAPH_IP_INPUT	opt_netgraph.h
501NETGRAPH_IPFW		opt_netgraph.h
502NETGRAPH_KSOCKET	opt_netgraph.h
503NETGRAPH_L2TP		opt_netgraph.h
504NETGRAPH_LMI		opt_netgraph.h
505# MPPC compression requires proprietary files (not included)
506NETGRAPH_MPPC_COMPRESSION	opt_netgraph.h
507NETGRAPH_MPPC_ENCRYPTION	opt_netgraph.h
508NETGRAPH_NAT		opt_netgraph.h
509NETGRAPH_NETFLOW	opt_netgraph.h
510NETGRAPH_ONE2MANY	opt_netgraph.h
511NETGRAPH_PATCH		opt_netgraph.h
512NETGRAPH_PIPE		opt_netgraph.h
513NETGRAPH_PPP		opt_netgraph.h
514NETGRAPH_PPPOE		opt_netgraph.h
515NETGRAPH_PPTPGRE	opt_netgraph.h
516NETGRAPH_PRED1		opt_netgraph.h
517NETGRAPH_RFC1490	opt_netgraph.h
518NETGRAPH_SOCKET		opt_netgraph.h
519NETGRAPH_SPLIT		opt_netgraph.h
520NETGRAPH_SPPP		opt_netgraph.h
521NETGRAPH_TAG		opt_netgraph.h
522NETGRAPH_TCPMSS		opt_netgraph.h
523NETGRAPH_TEE		opt_netgraph.h
524NETGRAPH_TTY		opt_netgraph.h
525NETGRAPH_UI		opt_netgraph.h
526NETGRAPH_VJC		opt_netgraph.h
527NETGRAPH_VLAN		opt_netgraph.h
528
529# NgATM options
530NGATM_ATM		opt_netgraph.h
531NGATM_ATMBASE		opt_netgraph.h
532NGATM_SSCOP		opt_netgraph.h
533NGATM_SSCFU		opt_netgraph.h
534NGATM_UNI		opt_netgraph.h
535NGATM_CCATM		opt_netgraph.h
536
537# DRM options
538DRM_DEBUG		opt_drm.h
539
540TI_SF_BUF_JUMBO		opt_ti.h
541TI_JUMBO_HDRSPLIT	opt_ti.h
542
543# XXX Conflict: # of devices vs network protocol (Native ATM).
544# This makes "atm.h" unusable.
545NATM
546
547# DPT driver debug flags
548DPT_MEASURE_PERFORMANCE	opt_dpt.h
549DPT_RESET_HBA		opt_dpt.h
550
551# Misc debug flags.  Most of these should probably be replaced with
552# 'DEBUG', and then let people recompile just the interesting modules
553# with 'make CC="cc -DDEBUG"'.
554CLUSTERDEBUG		opt_debug_cluster.h
555DEBUG_1284		opt_ppb_1284.h
556VP0_DEBUG		opt_vpo.h
557LPT_DEBUG		opt_lpt.h
558PLIP_DEBUG		opt_plip.h
559LOCKF_DEBUG		opt_debug_lockf.h
560SI_DEBUG		opt_debug_si.h
561IFMEDIA_DEBUG		opt_ifmedia.h
562
563# Fb options
564FB_DEBUG		opt_fb.h
565FB_INSTALL_CDEV		opt_fb.h
566
567# ppbus related options
568PERIPH_1284		opt_ppb_1284.h
569DONTPROBE_1284		opt_ppb_1284.h
570
571# smbus related options
572ENABLE_ALART		opt_intpm.h
573
574# These cause changes all over the kernel
575BLKDEV_IOSIZE		opt_global.h
576BURN_BRIDGES		opt_global.h
577DEBUG			opt_global.h
578DEBUG_LOCKS		opt_global.h
579DEBUG_VFS_LOCKS		opt_global.h
580DFLTPHYS		opt_global.h
581DIAGNOSTIC		opt_global.h
582INVARIANT_SUPPORT	opt_global.h
583INVARIANTS		opt_global.h
584MAXCPU			opt_global.h
585MAXMEMDOM		opt_global.h
586MAXPHYS			opt_global.h
587MCLSHIFT		opt_global.h
588MUTEX_DEBUG		opt_global.h
589MUTEX_NOINLINE		opt_global.h
590LOCK_PROFILING		opt_global.h
591LOCK_PROFILING_FAST	opt_global.h
592MSIZE			opt_global.h
593REGRESSION		opt_global.h
594RWLOCK_NOINLINE		opt_global.h
595SX_NOINLINE		opt_global.h
596VFS_BIO_DEBUG		opt_global.h
597
598# These are VM related options
599VM_KMEM_SIZE		opt_vm.h
600VM_KMEM_SIZE_SCALE	opt_vm.h
601VM_KMEM_SIZE_MAX	opt_vm.h
602VM_NRESERVLEVEL		opt_vm.h
603VM_LEVEL_0_ORDER	opt_vm.h
604NO_SWAPPING		opt_vm.h
605MALLOC_MAKE_FAILURES	opt_vm.h
606MALLOC_PROFILE		opt_vm.h
607MALLOC_DEBUG_MAXZONES	opt_vm.h
608
609# The MemGuard replacement allocator used for tamper-after-free detection
610DEBUG_MEMGUARD		opt_vm.h
611
612# The RedZone malloc(9) protection
613DEBUG_REDZONE		opt_vm.h
614
615# Standard SMP options
616SMP			opt_global.h
617
618# Size of the kernel message buffer
619MSGBUF_SIZE		opt_msgbuf.h
620
621# NFS options
622NFS_MINATTRTIMO		opt_nfs.h
623NFS_MAXATTRTIMO		opt_nfs.h
624NFS_MINDIRATTRTIMO	opt_nfs.h
625NFS_MAXDIRATTRTIMO	opt_nfs.h
626NFS_DEBUG		opt_nfs.h
627
628# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
629OVERRIDE_CARD			opt_bktr.h
630OVERRIDE_TUNER			opt_bktr.h
631OVERRIDE_DBX			opt_bktr.h
632OVERRIDE_MSP			opt_bktr.h
633BROOKTREE_SYSTEM_DEFAULT	opt_bktr.h
634BROOKTREE_ALLOC_PAGES		opt_bktr.h
635BKTR_OVERRIDE_CARD		opt_bktr.h
636BKTR_OVERRIDE_TUNER		opt_bktr.h
637BKTR_OVERRIDE_DBX		opt_bktr.h
638BKTR_OVERRIDE_MSP		opt_bktr.h
639BKTR_SYSTEM_DEFAULT		opt_bktr.h
640BKTR_ALLOC_PAGES		opt_bktr.h
641BKTR_USE_PLL			opt_bktr.h
642BKTR_GPIO_ACCESS		opt_bktr.h
643BKTR_NO_MSP_RESET		opt_bktr.h
644BKTR_430_FX_MODE		opt_bktr.h
645BKTR_SIS_VIA_MODE		opt_bktr.h
646BKTR_USE_FREEBSD_SMBUS		opt_bktr.h
647BKTR_NEW_MSP34XX_DRIVER		opt_bktr.h
648
649# Options for uart(4)
650UART_PPS_ON_CTS		opt_uart.h
651UART_POLL_FREQ		opt_uart.h
652
653# options for bus/device framework
654BUS_DEBUG		opt_bus.h
655
656# options for USB support
657USB_DEBUG		opt_usb.h
658USB_HOST_ALIGN		opt_usb.h
659USB_REQ_DEBUG		opt_usb.h
660USB_TEMPLATE		opt_usb.h
661USB_VERBOSE		opt_usb.h
662USB_DMA_SINGLE_ALLOC	opt_usb.h
663USB_EHCI_BIG_ENDIAN_DESC	opt_usb.h
664U3G_DEBUG		opt_u3g.h
665UKBD_DFLT_KEYMAP	opt_ukbd.h
666UPLCOM_INTR_INTERVAL	opt_uplcom.h
667UVSCOM_DEFAULT_OPKTSIZE	opt_uvscom.h
668UVSCOM_INTR_INTERVAL	opt_uvscom.h
669
670# Embedded system options
671INIT_PATH
672
673ROOTDEVNAME
674
675FDC_DEBUG		opt_fdc.h
676PCFCLOCK_VERBOSE	opt_pcfclock.h
677PCFCLOCK_MAX_RETRIES	opt_pcfclock.h
678
679KTR			opt_global.h
680KTR_ALQ			opt_ktr.h
681KTR_MASK		opt_ktr.h
682KTR_CPUMASK		opt_ktr.h
683KTR_COMPILE		opt_global.h
684KTR_BOOT_ENTRIES	opt_global.h
685KTR_ENTRIES		opt_global.h
686KTR_VERBOSE		opt_ktr.h
687WITNESS			opt_global.h
688WITNESS_KDB		opt_witness.h
689WITNESS_NO_VNODE	opt_witness.h
690WITNESS_SKIPSPIN	opt_witness.h
691WITNESS_COUNT		opt_witness.h
692OPENSOLARIS_WITNESS	opt_global.h
693
694# options for ACPI support
695ACPI_DEBUG		opt_acpi.h
696ACPI_MAX_TASKS		opt_acpi.h
697ACPI_MAX_THREADS	opt_acpi.h
698ACPI_DMAR		opt_acpi.h
699DEV_ACPI		opt_acpi.h
700
701# ISA support
702DEV_ISA			opt_isa.h
703ISAPNP			opt_isa.h
704
705# various 'device presence' options.
706DEV_BPF			opt_bpf.h
707DEV_CARP		opt_carp.h
708DEV_ENC			opt_enc.h
709DEV_MCA			opt_mca.h
710DEV_NETMAP		opt_global.h
711DEV_PCI			opt_pci.h
712DEV_PF			opt_pf.h
713DEV_PFLOG		opt_pf.h
714DEV_PFSYNC		opt_pf.h
715DEV_RANDOM		opt_global.h
716DEV_SPLASH		opt_splash.h
717DEV_VLAN		opt_vlan.h
718
719# EISA support
720DEV_EISA		opt_eisa.h
721EISA_SLOTS		opt_eisa.h
722
723# ed driver
724ED_HPP			opt_ed.h
725ED_3C503		opt_ed.h
726ED_SIC			opt_ed.h
727
728# bce driver
729BCE_DEBUG		opt_bce.h
730BCE_NVRAM_WRITE_SUPPORT	opt_bce.h
731
732SOCKBUF_DEBUG		opt_global.h
733
734
735# options for ubsec driver
736UBSEC_DEBUG		opt_ubsec.h
737UBSEC_RNDTEST		opt_ubsec.h
738UBSEC_NO_RNG		opt_ubsec.h
739
740# options for hifn driver
741HIFN_DEBUG		opt_hifn.h
742HIFN_RNDTEST		opt_hifn.h
743
744# options for safenet driver
745SAFE_DEBUG		opt_safe.h
746SAFE_NO_RNG		opt_safe.h
747SAFE_RNDTEST		opt_safe.h
748
749# syscons/vt options
750MAXCONS			opt_syscons.h
751SC_ALT_MOUSE_IMAGE	opt_syscons.h
752SC_CUT_SPACES2TABS	opt_syscons.h
753SC_CUT_SEPCHARS		opt_syscons.h
754SC_DEBUG_LEVEL		opt_syscons.h
755SC_DFLT_FONT		opt_syscons.h
756SC_DISABLE_KDBKEY	opt_syscons.h
757SC_DISABLE_REBOOT	opt_syscons.h
758SC_HISTORY_SIZE		opt_syscons.h
759SC_KERNEL_CONS_ATTR	opt_syscons.h
760SC_KERNEL_CONS_REV_ATTR	opt_syscons.h
761SC_MOUSE_CHAR		opt_syscons.h
762SC_NO_CUTPASTE		opt_syscons.h
763SC_NO_FONT_LOADING	opt_syscons.h
764SC_NO_HISTORY		opt_syscons.h
765SC_NO_MODE_CHANGE	opt_syscons.h
766SC_NO_SUSPEND_VTYSWITCH	opt_syscons.h
767SC_NO_SYSMOUSE		opt_syscons.h
768SC_NORM_ATTR		opt_syscons.h
769SC_NORM_REV_ATTR	opt_syscons.h
770SC_PIXEL_MODE		opt_syscons.h
771SC_RENDER_DEBUG		opt_syscons.h
772SC_TWOBUTTON_MOUSE	opt_syscons.h
773VT_ALT_TO_ESC_HACK	opt_syscons.h
774VT_FB_DEFAULT_WIDTH	opt_syscons.h
775VT_FB_DEFAULT_HEIGHT	opt_syscons.h
776VT_MAXWINDOWS		opt_syscons.h
777VT_TWOBUTTON_MOUSE	opt_syscons.h
778DEV_SC			opt_syscons.h
779DEV_VT			opt_syscons.h
780
781# teken terminal emulator options
782TEKEN_CONS25		opt_teken.h
783TEKEN_UTF8		opt_teken.h
784TERMINAL_KERN_ATTR	opt_teken.h
785TERMINAL_NORM_ATTR	opt_teken.h
786
787# options for printf
788PRINTF_BUFR_SIZE	opt_printf.h
789
790# kbd options
791KBD_DISABLE_KEYMAP_LOAD	opt_kbd.h
792KBD_INSTALL_CDEV	opt_kbd.h
793KBD_MAXRETRY		opt_kbd.h
794KBD_MAXWAIT		opt_kbd.h
795KBD_RESETDELAY		opt_kbd.h
796KBDIO_DEBUG		opt_kbd.h
797
798# options for the Atheros driver
799ATH_DEBUG		opt_ath.h
800ATH_TXBUF		opt_ath.h
801ATH_RXBUF		opt_ath.h
802ATH_DIAGAPI		opt_ath.h
803ATH_TX99_DIAG		opt_ath.h
804ATH_ENABLE_11N		opt_ath.h
805ATH_ENABLE_DFS		opt_ath.h
806ATH_EEPROM_FIRMWARE	opt_ath.h
807ATH_ENABLE_RADIOTAP_VENDOR_EXT	opt_ath.h
808ATH_DEBUG_ALQ		opt_ath.h
809ATH_KTR_INTR_DEBUG	opt_ath.h
810
811# options for the Atheros hal
812AH_SUPPORT_AR5416	opt_ah.h
813# XXX For now, this breaks non-AR9130 chipsets, so only use it
814# XXX when actually targetting AR9130.
815AH_SUPPORT_AR9130	opt_ah.h
816
817# This is required for AR933x SoC support
818AH_SUPPORT_AR9330	opt_ah.h
819AH_SUPPORT_AR9340	opt_ah.h
820AH_SUPPORT_QCA9550	opt_ah.h
821
822AH_DEBUG		opt_ah.h
823AH_ASSERT		opt_ah.h
824AH_DEBUG_ALQ		opt_ah.h
825AH_REGOPS_FUNC		opt_ah.h
826AH_WRITE_REGDOMAIN	opt_ah.h
827AH_DEBUG_COUNTRY	opt_ah.h
828AH_WRITE_EEPROM		opt_ah.h
829AH_PRIVATE_DIAG		opt_ah.h
830AH_NEED_DESC_SWAP	opt_ah.h
831AH_USE_INIPDGAIN	opt_ah.h
832AH_MAXCHAN		opt_ah.h
833AH_RXCFG_SDMAMW_4BYTES	opt_ah.h
834AH_INTERRUPT_DEBUGGING	opt_ah.h
835# AR5416 and later interrupt mitigation
836# XXX do not use this for AR9130
837AH_AR5416_INTERRUPT_MITIGATION	opt_ah.h
838
839# options for the Broadcom BCM43xx driver (bwi)
840BWI_DEBUG		opt_bwi.h
841BWI_DEBUG_VERBOSE	opt_bwi.h
842
843# options for the Marvell 8335 wireless driver
844MALO_DEBUG		opt_malo.h
845MALO_TXBUF		opt_malo.h
846MALO_RXBUF		opt_malo.h
847
848# options for the Marvell wireless driver
849MWL_DEBUG		opt_mwl.h
850MWL_TXBUF		opt_mwl.h
851MWL_RXBUF		opt_mwl.h
852MWL_DIAGAPI		opt_mwl.h
853MWL_AGGR_SIZE		opt_mwl.h
854MWL_TX_NODROP		opt_mwl.h
855
856# Options for the Intel 802.11ac wireless driver
857IWM_DEBUG		opt_iwm.h
858
859# Options for the Intel 802.11n wireless driver
860IWN_DEBUG		opt_iwn.h
861
862# Options for the Intel 3945ABG wireless driver
863WPI_DEBUG		opt_wpi.h
864
865# dcons options
866DCONS_BUF_SIZE		opt_dcons.h
867DCONS_POLL_HZ		opt_dcons.h
868DCONS_FORCE_CONSOLE	opt_dcons.h
869DCONS_FORCE_GDB		opt_dcons.h
870
871# HWPMC options
872HWPMC_DEBUG		opt_global.h
873HWPMC_HOOKS
874HWPMC_MIPS_BACKTRACE 	opt_hwpmc_hooks.h
875
876# XBOX options for FreeBSD/i386, but some files are MI
877XBOX			opt_xbox.h
878
879# Interrupt filtering
880INTR_FILTER
881
882# 802.11 support layer
883IEEE80211_DEBUG		opt_wlan.h
884IEEE80211_DEBUG_REFCNT	opt_wlan.h
885IEEE80211_AMPDU_AGE	opt_wlan.h
886IEEE80211_SUPPORT_MESH	opt_wlan.h
887IEEE80211_SUPPORT_SUPERG	opt_wlan.h
888IEEE80211_SUPPORT_TDMA	opt_wlan.h
889IEEE80211_ALQ		opt_wlan.h
890IEEE80211_DFS_DEBUG	opt_wlan.h
891
892# 802.11 TDMA support
893TDMA_SLOTLEN_DEFAULT	opt_tdma.h
894TDMA_SLOTCNT_DEFAULT	opt_tdma.h
895TDMA_BINTVAL_DEFAULT	opt_tdma.h
896TDMA_TXRATE_11B_DEFAULT	opt_tdma.h
897TDMA_TXRATE_11G_DEFAULT	opt_tdma.h
898TDMA_TXRATE_11A_DEFAULT	opt_tdma.h
899TDMA_TXRATE_TURBO_DEFAULT	opt_tdma.h
900TDMA_TXRATE_HALF_DEFAULT	opt_tdma.h
901TDMA_TXRATE_QUARTER_DEFAULT	opt_tdma.h
902TDMA_TXRATE_11NA_DEFAULT	opt_tdma.h
903TDMA_TXRATE_11NG_DEFAULT	opt_tdma.h
904
905# VideoMode
906PICKMODE_DEBUG			opt_videomode.h
907
908# Network stack virtualization options
909VIMAGE			opt_global.h
910VNET_DEBUG		opt_global.h
911
912# Common Flash Interface (CFI) options
913CFI_SUPPORT_STRATAFLASH	opt_cfi.h
914CFI_ARMEDANDDANGEROUS	opt_cfi.h
915
916# Sound options
917SND_DEBUG		opt_snd.h
918SND_DIAGNOSTIC		opt_snd.h
919SND_FEEDER_MULTIFORMAT	opt_snd.h
920SND_FEEDER_FULL_MULTIFORMAT	opt_snd.h
921SND_FEEDER_RATE_HP	opt_snd.h
922SND_PCM_64		opt_snd.h
923SND_OLDSTEREO		opt_snd.h
924
925X86BIOS
926
927# Flattened device tree options
928FDT		opt_platform.h
929FDT_DTB_STATIC	opt_platform.h
930
931# OFED Infiniband stack
932OFED		opt_ofed.h
933OFED_DEBUG_INIT	opt_ofed.h
934SDP		opt_ofed.h
935SDP_DEBUG	opt_ofed.h
936IPOIB		opt_ofed.h
937IPOIB_DEBUG	opt_ofed.h
938IPOIB_CM	opt_ofed.h
939
940# Resource Accounting
941RACCT		opt_global.h
942RACCT_DEFAULT_TO_DISABLED	opt_global.h
943
944# Resource Limits
945RCTL		opt_global.h
946
947# Random number generator(s)
948# Which CSPRNG hash we get.
949# If Yarrow is not chosen, Fortuna is selected.
950RANDOM_YARROW	opt_global.h
951# With this, no entropy processor is loaded, but the entropy
952# harvesting infrastructure is present. This means an entropy
953# processor may be loaded as a module.
954RANDOM_LOADABLE	opt_global.h
955# This turns on high-rate and potentially expensive harvesting in
956# the uma slab allocator.
957RANDOM_ENABLE_UMA	opt_global.h
958
959# Intel em(4) driver
960EM_MULTIQUEUE	opt_em.h
961