1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affects only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AACRAID_DEBUG opt_aacraid.h 35AHC_ALLOW_MEMIO opt_aic7xxx.h 36AHC_TMODE_ENABLE opt_aic7xxx.h 37AHC_DUMP_EEPROM opt_aic7xxx.h 38AHC_DEBUG opt_aic7xxx.h 39AHC_DEBUG_OPTS opt_aic7xxx.h 40AHC_REG_PRETTY_PRINT opt_aic7xxx.h 41AHD_DEBUG opt_aic79xx.h 42AHD_DEBUG_OPTS opt_aic79xx.h 43AHD_TMODE_ENABLE opt_aic79xx.h 44AHD_REG_PRETTY_PRINT opt_aic79xx.h 45 46# Debugging options. 47ALT_BREAK_TO_DEBUGGER opt_kdb.h 48BREAK_TO_DEBUGGER opt_kdb.h 49BUF_TRACKING opt_global.h 50DDB 51DDB_BUFR_SIZE opt_ddb.h 52DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 53DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 54DDB_CTF opt_ddb.h 55DDB_NUMSYM opt_ddb.h 56EARLY_PRINTF opt_global.h 57FULL_BUF_TRACKING opt_global.h 58GDB 59KDB opt_global.h 60KDB_TRACE opt_kdb.h 61KDB_UNATTENDED opt_kdb.h 62KLD_DEBUG opt_kld.h 63NUM_CORE_FILES opt_global.h 64QUEUE_MACRO_DEBUG_TRACE opt_global.h 65QUEUE_MACRO_DEBUG_TRASH opt_global.h 66SYSCTL_DEBUG opt_sysctl.h 67TEXTDUMP_PREFERRED opt_ddb.h 68TEXTDUMP_VERBOSE opt_ddb.h 69TSLOG opt_global.h 70TSLOG_PAGEZERO opt_global.h 71TSLOGSIZE opt_global.h 72 73# Miscellaneous options. 74ALQ 75ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h 76ATSE_CFI_HACK opt_cfi.h 77AUDIT opt_global.h 78BOOTHOWTO opt_global.h 79BOOTVERBOSE opt_global.h 80CALLOUT_PROFILING 81CAPABILITIES opt_capsicum.h 82CAPABILITY_MODE opt_capsicum.h 83CC_CDG opt_global.h 84CC_CHD opt_global.h 85CC_CUBIC opt_global.h 86CC_DEFAULT opt_cc.h 87CC_DCTCP opt_global.h 88CC_HD opt_global.h 89CC_HTCP opt_global.h 90CC_NEWRENO opt_global.h 91CC_VEGAS opt_global.h 92COMPAT_43 opt_global.h 93COMPAT_43TTY opt_global.h 94COMPAT_FREEBSD4 opt_global.h 95COMPAT_FREEBSD5 opt_global.h 96COMPAT_FREEBSD6 opt_global.h 97COMPAT_FREEBSD7 opt_global.h 98COMPAT_FREEBSD9 opt_global.h 99COMPAT_FREEBSD10 opt_global.h 100COMPAT_FREEBSD11 opt_global.h 101COMPAT_FREEBSD12 opt_global.h 102COMPAT_FREEBSD13 opt_global.h 103COMPAT_LINUXKPI opt_dontuse.h 104COMPILING_LINT opt_global.h 105CY_PCI_FASTINTR 106DEADLKRES opt_watchdog.h 107EXPERIMENTAL opt_global.h 108DIRECTIO 109FILEMON opt_dontuse.h 110FFCLOCK 111FULL_PREEMPTION opt_sched.h 112GZIO opt_gzio.h 113IMGACT_BINMISC opt_dontuse.h 114IPI_PREEMPTION opt_sched.h 115GEOM_BDE opt_geom.h 116GEOM_CACHE opt_geom.h 117GEOM_CONCAT opt_geom.h 118GEOM_ELI opt_geom.h 119GEOM_GATE opt_geom.h 120GEOM_JOURNAL opt_geom.h 121GEOM_LABEL opt_geom.h 122GEOM_LABEL_GPT opt_geom.h 123GEOM_LINUX_LVM opt_geom.h 124GEOM_MAP opt_geom.h 125GEOM_MIRROR opt_geom.h 126GEOM_MOUNTVER opt_geom.h 127GEOM_MULTIPATH opt_geom.h 128GEOM_NOP opt_geom.h 129GEOM_PART_APM opt_geom.h 130GEOM_PART_BSD opt_geom.h 131GEOM_PART_BSD64 opt_geom.h 132GEOM_PART_EBR opt_geom.h 133GEOM_PART_GPT opt_geom.h 134GEOM_PART_LDM opt_geom.h 135GEOM_PART_MBR opt_geom.h 136GEOM_PART_VTOC8 opt_geom.h 137GEOM_RAID opt_geom.h 138GEOM_RAID3 opt_geom.h 139GEOM_SHSEC opt_geom.h 140GEOM_STRIPE opt_geom.h 141GEOM_UZIP opt_geom.h 142GEOM_UZIP_DEBUG opt_geom.h 143GEOM_VINUM opt_geom.h 144GEOM_VIRSTOR opt_geom.h 145GEOM_ZERO opt_geom.h 146IFLIB opt_iflib.h 147KDTRACE_HOOKS opt_global.h 148KDTRACE_FRAME opt_kdtrace.h 149KN_HASHSIZE opt_kqueue.h 150KSTACK_MAX_PAGES 151KSTACK_PAGES 152KSTACK_USAGE_PROF 153KTRACE 154KTRACE_REQUEST_POOL opt_ktrace.h 155LIBICONV 156MAC opt_global.h 157MAC_BIBA opt_dontuse.h 158MAC_BSDEXTENDED opt_dontuse.h 159MAC_DDB opt_dontuse.h 160MAC_IFOFF opt_dontuse.h 161MAC_LOMAC opt_dontuse.h 162MAC_MLS opt_dontuse.h 163MAC_NONE opt_dontuse.h 164MAC_NTPD opt_dontuse.h 165MAC_PARTITION opt_dontuse.h 166MAC_PORTACL opt_dontuse.h 167MAC_PRIORITY opt_dontuse.h 168MAC_SEEOTHERUIDS opt_dontuse.h 169MAC_STATIC opt_mac.h 170MAC_STUB opt_dontuse.h 171MAC_TEST opt_dontuse.h 172MAC_VERIEXEC opt_dontuse.h 173MAC_VERIEXEC_SHA1 opt_dontuse.h 174MAC_VERIEXEC_SHA256 opt_dontuse.h 175MAC_VERIEXEC_SHA384 opt_dontuse.h 176MAC_VERIEXEC_SHA512 opt_dontuse.h 177MD_ROOT opt_md.h 178MD_ROOT_FSTYPE opt_md.h 179MD_ROOT_READONLY opt_md.h 180MD_ROOT_SIZE opt_md.h 181MD_ROOT_MEM opt_md.h 182MFI_DEBUG opt_mfi.h 183MFI_DECODE_LOG opt_mfi.h 184MPROF_BUFFERS opt_mprof.h 185MPROF_HASH_SIZE opt_mprof.h 186NEW_PCIB opt_global.h 187NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 188NO_ADAPTIVE_RWLOCKS 189NO_ADAPTIVE_SX 190NO_OBSOLETE_CODE opt_global.h 191NO_SYSCTL_DESCR opt_global.h 192NSWBUF_MIN opt_param.h 193MBUF_PACKET_ZONE_DISABLE opt_global.h 194PANIC_REBOOT_WAIT_TIME opt_panic.h 195PCI_HP opt_pci.h 196PCI_IOV opt_global.h 197PPC_DEBUG opt_ppc.h 198PPC_PROBE_CHIPSET opt_ppc.h 199PPS_SYNC opt_ntp.h 200PREEMPTION opt_sched.h 201QUOTA 202SCHED_4BSD opt_sched.h 203SCHED_STATS opt_sched.h 204SCHED_ULE opt_sched.h 205SLEEPQUEUE_PROFILING 206SLHCI_DEBUG opt_slhci.h 207STACK opt_stack.h 208SUIDDIR 209MSGMNB opt_sysvipc.h 210MSGMNI opt_sysvipc.h 211MSGSEG opt_sysvipc.h 212MSGSSZ opt_sysvipc.h 213MSGTQL opt_sysvipc.h 214SEMMNI opt_sysvipc.h 215SEMMNS opt_sysvipc.h 216SEMMNU opt_sysvipc.h 217SEMMSL opt_sysvipc.h 218SEMOPM opt_sysvipc.h 219SEMUME opt_sysvipc.h 220SHMALL opt_sysvipc.h 221SHMMAX opt_sysvipc.h 222SHMMAXPGS opt_sysvipc.h 223SHMMIN opt_sysvipc.h 224SHMMNI opt_sysvipc.h 225SHMSEG opt_sysvipc.h 226SYSVMSG opt_sysvipc.h 227SYSVSEM opt_sysvipc.h 228SYSVSHM opt_sysvipc.h 229SW_WATCHDOG opt_watchdog.h 230TCPHPTS opt_inet.h 231TCP_REQUEST_TRK opt_global.h 232TCP_ACCOUNTING opt_global.h 233# 234# TCP SaD Detection is an experimental Sack attack Detection (SaD) 235# algorithm that uses "normal" behaviour with SACK's to detect 236# a possible attack. It is strictly experimental at this point. 237# 238TCP_SAD_DETECTION opt_inet.h 239TURNSTILE_PROFILING 240UMTX_PROFILING 241UMTX_CHAINS opt_global.h 242VERBOSE_SYSINIT 243ZSTDIO opt_zstdio.h 244 245# Sanitizers 246COVERAGE opt_global.h 247KASAN opt_global.h 248KCOV 249KCSAN opt_global.h 250KMSAN opt_global.h 251KUBSAN opt_global.h 252 253# POSIX kernel options 254P1003_1B_MQUEUE opt_posix.h 255P1003_1B_SEMAPHORES opt_posix.h 256_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 257 258# Do we want the config file compiled into the kernel? 259INCLUDE_CONFIG_FILE opt_config.h 260 261# Options for static filesystems. These should only be used at config 262# time, since the corresponding lkms cannot work if there are any static 263# dependencies. Unusability is enforced by hiding the defines for the 264# options in a never-included header. 265AUTOFS opt_dontuse.h 266CD9660 opt_dontuse.h 267EXT2FS opt_dontuse.h 268FDESCFS opt_dontuse.h 269FFS opt_dontuse.h 270FUSEFS opt_dontuse.h 271MSDOSFS opt_dontuse.h 272NULLFS opt_dontuse.h 273PROCFS opt_dontuse.h 274PSEUDOFS opt_dontuse.h 275SMBFS opt_dontuse.h 276TARFS opt_dontuse.h 277TMPFS opt_dontuse.h 278UDF opt_dontuse.h 279UNIONFS opt_dontuse.h 280ZFS opt_dontuse.h 281 282# Pseudofs debugging 283PSEUDOFS_TRACE opt_pseudofs.h 284 285# Tarfs debugging 286TARFS_DEBUG opt_tarfs.h 287 288# In-kernel GSS-API 289KGSSAPI opt_kgssapi.h 290KGSSAPI_DEBUG opt_kgssapi.h 291 292# These static filesystems have one slightly bogus static dependency in 293# sys/i386/i386/autoconf.c. If any of these filesystems are 294# statically compiled into the kernel, code for mounting them as root 295# filesystems will be enabled - but look below. 296# NFSCL - client 297# NFSD - server 298NFSCL opt_nfs.h 299NFSD opt_nfs.h 300 301# filesystems and libiconv bridge 302CD9660_ICONV opt_dontuse.h 303MSDOSFS_ICONV opt_dontuse.h 304UDF_ICONV opt_dontuse.h 305 306# If you are following the conditions in the copyright, 307# you can enable soft-updates which will speed up a lot of thigs 308# and make the system safer from crashes at the same time. 309# otherwise a STUB module will be compiled in. 310SOFTUPDATES opt_ffs.h 311 312# On small, embedded systems, it can be useful to turn off support for 313# snapshots. It saves about 30-40k for a feature that would be lightly 314# used, if it is used at all. 315NO_FFS_SNAPSHOT opt_ffs.h 316 317# Enabling this option turns on support for Access Control Lists in UFS, 318# which can be used to support high security configurations. Depends on 319# UFS_EXTATTR. 320UFS_ACL opt_ufs.h 321 322# Enabling this option turns on support for extended attributes in UFS-based 323# filesystems, which can be used to support high security configurations 324# as well as new filesystem features. 325UFS_EXTATTR opt_ufs.h 326UFS_EXTATTR_AUTOSTART opt_ufs.h 327 328# Enable fast hash lookups for large directories on UFS-based filesystems. 329UFS_DIRHASH opt_ufs.h 330 331# Enable gjournal-based UFS journal. 332UFS_GJOURNAL opt_ufs.h 333 334# The below sentence is not in English, and neither is this one. 335# We plan to remove the static dependences above, with a 336# <filesystem>_ROOT option to control if it usable as root. This list 337# allows these options to be present in config files already (though 338# they won't make any difference yet). 339NFS_ROOT opt_nfsroot.h 340 341# SMB/CIFS requester 342NETSMB opt_netsmb.h 343 344# Enable debugnet(4) networking support. 345DEBUGNET opt_global.h 346# Enable netdump(4) client support. 347NETDUMP opt_global.h 348# Enable netgdb(4) support. 349NETGDB opt_global.h 350 351# Options used only in subr_param.c. 352HZ opt_param.h 353MAXFILES opt_param.h 354NBUF opt_param.h 355NSFBUFS opt_param.h 356VM_BCACHE_SIZE_MAX opt_param.h 357VM_SWZONE_SIZE_MAX opt_param.h 358MAXUSERS 359DFLDSIZ opt_param.h 360MAXDSIZ opt_param.h 361MAXSSIZ opt_param.h 362 363# Generic SCSI options. 364CAM_MAX_HIGHPOWER opt_cam.h 365CAMDEBUG opt_cam.h 366CAM_DEBUG_COMPILE opt_cam.h 367CAM_DEBUG_DELAY opt_cam.h 368CAM_DEBUG_BUS opt_cam.h 369CAM_DEBUG_TARGET opt_cam.h 370CAM_DEBUG_LUN opt_cam.h 371CAM_DEBUG_FLAGS opt_cam.h 372CAM_BOOT_DELAY opt_cam.h 373CAM_IOSCHED_DYNAMIC opt_cam.h 374CAM_IO_STATS opt_cam.h 375CAM_TEST_FAILURE opt_cam.h 376SCSI_DELAY opt_scsi.h 377SCSI_NO_SENSE_STRINGS opt_scsi.h 378SCSI_NO_OP_STRINGS opt_scsi.h 379 380# Options used only in cam/ata/ata_da.c 381ATA_STATIC_ID opt_ada.h 382 383# Options used only in cam/scsi/scsi_cd.c 384CHANGER_MIN_BUSY_SECONDS opt_cd.h 385CHANGER_MAX_BUSY_SECONDS opt_cd.h 386 387# Options used only in cam/scsi/scsi_da.c 388DA_TRACK_REFS opt_da.h 389 390# Options used only in cam/scsi/scsi_sa.c. 391SA_IO_TIMEOUT opt_sa.h 392SA_SPACE_TIMEOUT opt_sa.h 393SA_REWIND_TIMEOUT opt_sa.h 394SA_ERASE_TIMEOUT opt_sa.h 395SA_1FM_AT_EOD opt_sa.h 396 397# Options used only in cam/scsi/scsi_pt.c 398SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 399 400# Options used only in cam/scsi/scsi_ses.c 401SES_ENABLE_PASSTHROUGH opt_ses.h 402 403# Options used in dev/sym/ (Symbios SCSI driver). 404SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 405 # disabled:0 (default), enabled:1 406SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 407 # disabled:0, enabled:1 (default) 408SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 409 # default:8, range:[1..64] 410 411# Options used only in dev/isp/* 412ISP_TARGET_MODE opt_isp.h 413ISP_FW_CRASH_DUMP opt_isp.h 414ISP_DEFAULT_ROLES opt_isp.h 415ISP_INTERNAL_TARGET opt_isp.h 416ISP_FCTAPE_OFF opt_isp.h 417 418# Options used only in dev/iscsi 419ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 420 421# Net stuff. 422ACCEPT_FILTER_DATA 423ACCEPT_FILTER_DNS 424ACCEPT_FILTER_HTTP 425ALTQ opt_global.h 426ALTQ_CBQ opt_altq.h 427ALTQ_CDNR opt_altq.h 428ALTQ_CODEL opt_altq.h 429ALTQ_DEBUG opt_altq.h 430ALTQ_HFSC opt_altq.h 431ALTQ_FAIRQ opt_altq.h 432ALTQ_NOPCC opt_altq.h 433ALTQ_PRIQ opt_altq.h 434ALTQ_RED opt_altq.h 435ALTQ_RIO opt_altq.h 436BOOTP opt_bootp.h 437BOOTP_BLOCKSIZE opt_bootp.h 438BOOTP_COMPAT opt_bootp.h 439BOOTP_NFSROOT opt_bootp.h 440BOOTP_NFSV3 opt_bootp.h 441BOOTP_WIRED_TO opt_bootp.h 442DEVICE_POLLING 443DUMMYNET opt_ipdn.h 444RATELIMIT opt_ratelimit.h 445RATELIMIT_DEBUG opt_ratelimit.h 446INET opt_inet.h 447INET6 opt_inet6.h 448STATS opt_global.h 449IPDIVERT 450IPFILTER opt_ipfilter.h 451IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 452IPFILTER_LOG opt_ipfilter.h 453IPFILTER_LOOKUP opt_ipfilter.h 454IPFIREWALL opt_ipfw.h 455IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 456IPFIREWALL_NAT opt_ipfw.h 457IPFIREWALL_NAT64 opt_ipfw.h 458IPFIREWALL_NPTV6 opt_ipfw.h 459IPFIREWALL_VERBOSE opt_ipfw.h 460IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 461IPFIREWALL_PMOD opt_ipfw.h 462IPSEC opt_ipsec.h 463IPSEC_DEBUG opt_ipsec.h 464IPSEC_SUPPORT opt_ipsec.h 465IPSTEALTH 466KERN_TLS 467KRPC 468LIBALIAS 469LIBMCHAIN 470MBUF_PROFILING 471MBUF_STRESS_TEST 472MROUTING opt_mrouting.h 473NFSLOCKD 474NETLINK opt_netlink.h 475PF_DEFAULT_TO_DROP opt_pf.h 476ROUTE_MPATH opt_route.h 477ROUTETABLES opt_route.h 478FIB_ALGO opt_route.h 479RSS opt_rss.h 480SLIP_IFF_OPTS opt_slip.h 481TCPPCAP opt_global.h 482SIFTR 483TCP_BLACKBOX opt_global.h 484TCP_HHOOK opt_global.h 485TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading 486TCP_RFC7413 opt_inet.h 487TCP_RFC7413_MAX_KEYS opt_inet.h 488TCP_RFC7413_MAX_PSKS opt_inet.h 489TCP_SIGNATURE opt_ipsec.h 490VLAN_ARRAY opt_vlan.h 491XDR 492XBONEHACK 493 494# 495# SCTP 496# 497SCTP opt_sctp.h 498SCTP_SUPPORT opt_sctp.h 499SCTP_DEBUG opt_sctp.h # Enable debug printfs 500SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 501SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 502SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 503SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 504SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 505SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 506SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 507SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 508SCTP_LOCAL_TRACE_BUF opt_sctp.h # Use tracebuffer exported via sysctl 509SCTP_DETAILED_STR_STATS opt_sctp.h # Use per PR-SCTP policy stream stats 510# 511# 512# 513 514# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 515# Each netgraph node type can be either be compiled into the kernel 516# or loaded dynamically. To get the former, include the corresponding 517# option below. Each type has its own man page, e.g. ng_async(4). 518NETGRAPH 519NETGRAPH_DEBUG opt_netgraph.h 520NETGRAPH_ASYNC opt_netgraph.h 521NETGRAPH_BLUETOOTH opt_netgraph.h 522NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 523NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 524NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 525NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 526NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 527NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 528NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 529NETGRAPH_BPF opt_netgraph.h 530NETGRAPH_BRIDGE opt_netgraph.h 531NETGRAPH_CAR opt_netgraph.h 532NETGRAPH_CHECKSUM opt_netgraph.h 533NETGRAPH_CISCO opt_netgraph.h 534NETGRAPH_DEFLATE opt_netgraph.h 535NETGRAPH_DEVICE opt_netgraph.h 536NETGRAPH_ECHO opt_netgraph.h 537NETGRAPH_EIFACE opt_netgraph.h 538NETGRAPH_ETHER opt_netgraph.h 539NETGRAPH_ETHER_ECHO opt_netgraph.h 540NETGRAPH_FEC opt_netgraph.h 541NETGRAPH_FRAME_RELAY opt_netgraph.h 542NETGRAPH_GIF opt_netgraph.h 543NETGRAPH_GIF_DEMUX opt_netgraph.h 544NETGRAPH_HOLE opt_netgraph.h 545NETGRAPH_IFACE opt_netgraph.h 546NETGRAPH_IP_INPUT opt_netgraph.h 547NETGRAPH_IPFW opt_netgraph.h 548NETGRAPH_KSOCKET opt_netgraph.h 549NETGRAPH_L2TP opt_netgraph.h 550NETGRAPH_LMI opt_netgraph.h 551NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 552NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 553NETGRAPH_NAT opt_netgraph.h 554NETGRAPH_NETFLOW opt_netgraph.h 555NETGRAPH_ONE2MANY opt_netgraph.h 556NETGRAPH_PATCH opt_netgraph.h 557NETGRAPH_PIPE opt_netgraph.h 558NETGRAPH_PPP opt_netgraph.h 559NETGRAPH_PPPOE opt_netgraph.h 560NETGRAPH_PPTPGRE opt_netgraph.h 561NETGRAPH_PRED1 opt_netgraph.h 562NETGRAPH_RFC1490 opt_netgraph.h 563NETGRAPH_SOCKET opt_netgraph.h 564NETGRAPH_SPLIT opt_netgraph.h 565NETGRAPH_SPPP opt_netgraph.h 566NETGRAPH_TAG opt_netgraph.h 567NETGRAPH_TCPMSS opt_netgraph.h 568NETGRAPH_TEE opt_netgraph.h 569NETGRAPH_TTY opt_netgraph.h 570NETGRAPH_UI opt_netgraph.h 571NETGRAPH_VJC opt_netgraph.h 572NETGRAPH_VLAN opt_netgraph.h 573 574# DRM options 575DRM_DEBUG opt_drm.h 576 577TI_SF_BUF_JUMBO opt_ti.h 578TI_JUMBO_HDRSPLIT opt_ti.h 579 580# Misc debug flags. Most of these should probably be replaced with 581# 'DEBUG', and then let people recompile just the interesting modules 582# with 'make CC="cc -DDEBUG"'. 583DEBUG_1284 opt_ppb_1284.h 584LPT_DEBUG opt_lpt.h 585PLIP_DEBUG opt_plip.h 586LOCKF_DEBUG opt_debug_lockf.h 587SI_DEBUG opt_debug_si.h 588IFMEDIA_DEBUG opt_ifmedia.h 589 590# Fb options 591FB_DEBUG opt_fb.h 592 593# ppbus related options 594PERIPH_1284 opt_ppb_1284.h 595DONTPROBE_1284 opt_ppb_1284.h 596 597# smbus related options 598ENABLE_ALART opt_intpm.h 599 600# These cause changes all over the kernel 601BLKDEV_IOSIZE opt_global.h 602BURN_BRIDGES opt_global.h 603DEBUG opt_global.h 604DEBUG_LOCKS opt_global.h 605DEBUG_VFS_LOCKS opt_global.h 606DFLTPHYS opt_global.h 607DIAGNOSTIC opt_global.h 608INVARIANT_SUPPORT opt_global.h 609INVARIANTS opt_global.h 610KASSERT_PANIC_OPTIONAL opt_global.h 611MAXCPU opt_global.h 612MAXMEMDOM opt_global.h 613MAXPHYS opt_maxphys.h 614MCLSHIFT opt_global.h 615MUTEX_NOINLINE opt_global.h 616LOCK_PROFILING opt_global.h 617MSIZE opt_global.h 618REGRESSION opt_global.h 619RWLOCK_NOINLINE opt_global.h 620SX_NOINLINE opt_global.h 621VFS_BIO_DEBUG opt_global.h 622 623# These are VM related options 624VM_KMEM_SIZE opt_vm.h 625VM_KMEM_SIZE_SCALE opt_vm.h 626VM_KMEM_SIZE_MAX opt_vm.h 627VM_NRESERVLEVEL opt_vm.h 628VM_LEVEL_0_ORDER opt_vm.h 629NO_SWAPPING opt_vm.h 630MALLOC_MAKE_FAILURES opt_vm.h 631MALLOC_PROFILE opt_vm.h 632MALLOC_DEBUG_MAXZONES opt_vm.h 633 634# The MemGuard replacement allocator used for tamper-after-free detection 635DEBUG_MEMGUARD opt_vm.h 636 637# The RedZone malloc(9) protection 638DEBUG_REDZONE opt_vm.h 639 640# Standard SMP options 641EARLY_AP_STARTUP opt_global.h 642SMP opt_global.h 643NUMA opt_global.h 644 645# Size of the kernel message buffer 646MSGBUF_SIZE opt_msgbuf.h 647 648# NFS options 649NFS_MINATTRTIMO opt_nfs.h 650NFS_MAXATTRTIMO opt_nfs.h 651NFS_MINDIRATTRTIMO opt_nfs.h 652NFS_MAXDIRATTRTIMO opt_nfs.h 653NFS_DEBUG opt_nfs.h 654 655# TMPFS options 656TMPFS_PAGES_MINRESERVED opt_tmpfs.h 657 658# Options for uart(4) 659UART_PPS_ON_CTS opt_uart.h 660UART_POLL_FREQ opt_uart.h 661UART_DEV_TOLERANCE_PCT opt_uart.h 662 663# options for bus/device framework 664BUS_DEBUG opt_bus.h 665 666# options for USB support 667USB_DEBUG opt_usb.h 668USB_HOST_ALIGN opt_usb.h 669USB_REQ_DEBUG opt_usb.h 670USB_TEMPLATE opt_usb.h 671USB_VERBOSE opt_usb.h 672USB_DMA_SINGLE_ALLOC opt_usb.h 673USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 674U3G_DEBUG opt_u3g.h 675UKBD_DFLT_KEYMAP opt_ukbd.h 676UPLCOM_INTR_INTERVAL opt_uplcom.h 677UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 678UVSCOM_INTR_INTERVAL opt_uvscom.h 679 680# options for the Realtek rtwn driver 681RTWN_DEBUG opt_rtwn.h 682RTWN_WITHOUT_UCODE opt_rtwn.h 683 684# Embedded system options 685INIT_PATH 686 687ROOTDEVNAME 688 689FDC_DEBUG opt_fdc.h 690PCFCLOCK_VERBOSE opt_pcfclock.h 691PCFCLOCK_MAX_RETRIES opt_pcfclock.h 692 693KTR opt_global.h 694KTR_ALQ opt_ktr.h 695KTR_MASK opt_ktr.h 696KTR_CPUMASK opt_ktr.h 697KTR_COMPILE opt_global.h 698KTR_BOOT_ENTRIES opt_global.h 699KTR_ENTRIES opt_global.h 700KTR_VERBOSE opt_ktr.h 701WITNESS opt_global.h 702WITNESS_KDB opt_witness.h 703WITNESS_NO_VNODE opt_witness.h 704WITNESS_SKIPSPIN opt_witness.h 705WITNESS_COUNT opt_witness.h 706OPENSOLARIS_WITNESS opt_global.h 707 708EPOCH_TRACE opt_global.h 709 710# options for ACPI support 711ACPI_DEBUG opt_acpi.h 712ACPI_MAX_TASKS opt_acpi.h 713ACPI_MAX_THREADS opt_acpi.h 714DEV_ACPI opt_acpi.h 715ACPI_EARLY_EPYC_WAR opt_acpi.h 716 717# options for IOMMU support 718IOMMU opt_iommu.h 719 720# ISA support 721DEV_ISA opt_isa.h 722ISAPNP opt_dontuse.h 723 724# various 'device presence' options. 725DEV_BPF opt_bpf.h 726DEV_CARP opt_carp.h 727DEV_NETMAP opt_global.h 728DEV_PCI opt_pci.h 729DEV_PF opt_pf.h 730DEV_PFLOG opt_pf.h 731DEV_PFSYNC opt_pf.h 732DEV_SPLASH opt_splash.h 733DEV_VLAN opt_vlan.h 734 735# bce driver 736BCE_DEBUG opt_bce.h 737BCE_NVRAM_WRITE_SUPPORT opt_bce.h 738 739SOCKBUF_DEBUG opt_global.h 740 741 742# options for hifn driver 743HIFN_DEBUG opt_hifn.h 744HIFN_RNDTEST opt_hifn.h 745 746# options for safenet driver 747SAFE_DEBUG opt_safe.h 748SAFE_NO_RNG opt_safe.h 749SAFE_RNDTEST opt_safe.h 750 751# syscons/vt options 752MAXCONS opt_syscons.h 753SC_ALT_MOUSE_IMAGE opt_syscons.h 754SC_CUT_SPACES2TABS opt_syscons.h 755SC_CUT_SEPCHARS opt_syscons.h 756SC_DEBUG_LEVEL opt_syscons.h 757SC_DFLT_FONT opt_syscons.h 758SC_DFLT_TERM opt_syscons.h 759SC_DISABLE_KDBKEY opt_syscons.h 760SC_DISABLE_REBOOT opt_syscons.h 761SC_HISTORY_SIZE opt_syscons.h 762SC_KERNEL_CONS_ATTR opt_syscons.h 763SC_KERNEL_CONS_ATTRS opt_syscons.h 764SC_KERNEL_CONS_REV_ATTR opt_syscons.h 765SC_MOUSE_CHAR opt_syscons.h 766SC_NO_CUTPASTE opt_syscons.h 767SC_NO_FONT_LOADING opt_syscons.h 768SC_NO_HISTORY opt_syscons.h 769SC_NO_MODE_CHANGE opt_syscons.h 770SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 771SC_NO_SYSMOUSE opt_syscons.h 772SC_NO_TERM_DUMB opt_syscons.h 773SC_NO_TERM_SC opt_syscons.h 774SC_NO_TERM_TEKEN opt_syscons.h 775SC_NORM_ATTR opt_syscons.h 776SC_NORM_REV_ATTR opt_syscons.h 777SC_PIXEL_MODE opt_syscons.h 778SC_RENDER_DEBUG opt_syscons.h 779SC_TWOBUTTON_MOUSE opt_syscons.h 780VT_ALT_TO_ESC_HACK opt_syscons.h 781VT_FB_MAX_WIDTH opt_syscons.h 782VT_FB_MAX_HEIGHT opt_syscons.h 783VT_MAXWINDOWS opt_syscons.h 784VT_TWOBUTTON_MOUSE opt_syscons.h 785DEV_SC opt_syscons.h 786DEV_VT opt_syscons.h 787 788# teken terminal emulator options 789TEKEN_CONS25 opt_teken.h 790TEKEN_UTF8 opt_teken.h 791TERMINAL_KERN_ATTR opt_teken.h 792TERMINAL_NORM_ATTR opt_teken.h 793 794# options for printf 795PRINTF_BUFR_SIZE opt_printf.h 796BOOT_TAG opt_printf.h 797BOOT_TAG_SZ opt_printf.h 798 799# kbd options 800KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 801KBD_INSTALL_CDEV opt_kbd.h 802KBD_MAXRETRY opt_kbd.h 803KBD_MAXWAIT opt_kbd.h 804KBD_RESETDELAY opt_kbd.h 805KBD_DELAY1 opt_kbd.h 806KBD_DELAY2 opt_kbd.h 807KBDIO_DEBUG opt_kbd.h 808KBDMUX_DFLT_KEYMAP opt_kbdmux.h 809 810# options for the Atheros driver 811ATH_DEBUG opt_ath.h 812ATH_TXBUF opt_ath.h 813ATH_RXBUF opt_ath.h 814ATH_DIAGAPI opt_ath.h 815ATH_TX99_DIAG opt_ath.h 816ATH_ENABLE_11N opt_ath.h 817ATH_ENABLE_DFS opt_ath.h 818ATH_EEPROM_FIRMWARE opt_ath.h 819ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 820ATH_DEBUG_ALQ opt_ath.h 821ATH_KTR_INTR_DEBUG opt_ath.h 822 823# options for the Atheros hal 824# XXX For now, this breaks non-AR9130 chipsets, so only use it 825# XXX when actually targeting AR9130. 826AH_SUPPORT_AR9130 opt_ah.h 827 828# This is required for AR933x SoC support 829AH_SUPPORT_AR9330 opt_ah.h 830AH_SUPPORT_AR9340 opt_ah.h 831AH_SUPPORT_QCA9530 opt_ah.h 832AH_SUPPORT_QCA9550 opt_ah.h 833 834AH_DEBUG opt_ah.h 835AH_ASSERT opt_ah.h 836AH_DEBUG_ALQ opt_ah.h 837AH_REGOPS_FUNC opt_ah.h 838AH_WRITE_REGDOMAIN opt_ah.h 839AH_DEBUG_COUNTRY opt_ah.h 840AH_WRITE_EEPROM opt_ah.h 841AH_PRIVATE_DIAG opt_ah.h 842AH_NEED_DESC_SWAP opt_ah.h 843AH_USE_INIPDGAIN opt_ah.h 844AH_MAXCHAN opt_ah.h 845AH_RXCFG_SDMAMW_4BYTES opt_ah.h 846AH_INTERRUPT_DEBUGGING opt_ah.h 847# AR5416 and later interrupt mitigation 848# XXX do not use this for AR9130 849AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 850 851# options for the Altera mSGDMA driver (altera_msgdma) 852ALTERA_MSGDMA_DESC_STD opt_altera_msgdma.h 853ALTERA_MSGDMA_DESC_EXT opt_altera_msgdma.h 854ALTERA_MSGDMA_DESC_PF_STD opt_altera_msgdma.h 855ALTERA_MSGDMA_DESC_PF_EXT opt_altera_msgdma.h 856 857# options for the Broadcom BCM43xx driver (bwi) 858BWI_DEBUG opt_bwi.h 859BWI_DEBUG_VERBOSE opt_bwi.h 860 861# options for the Brodacom BCM43xx driver (bwn) 862BWN_DEBUG opt_bwn.h 863BWN_GPL_PHY opt_bwn.h 864BWN_USE_SIBA opt_bwn.h 865 866# Options for the SIBA driver 867SIBA_DEBUG opt_siba.h 868 869# options for the Marvell 8335 wireless driver 870MALO_DEBUG opt_malo.h 871MALO_TXBUF opt_malo.h 872MALO_RXBUF opt_malo.h 873 874# options for the Marvell wireless driver 875MWL_DEBUG opt_mwl.h 876MWL_TXBUF opt_mwl.h 877MWL_RXBUF opt_mwl.h 878MWL_DIAGAPI opt_mwl.h 879MWL_AGGR_SIZE opt_mwl.h 880MWL_TX_NODROP opt_mwl.h 881 882# Options for the Marvell NETA driver 883MVNETA_MULTIQUEUE opt_mvneta.h 884MVNETA_KTR opt_mvneta.h 885 886# Options for the Intel 802.11ac wireless driver 887IWM_DEBUG opt_iwm.h 888 889# Options for the Intel 802.11n wireless driver 890IWN_DEBUG opt_iwn.h 891 892# Options for the Intel 3945ABG wireless driver 893WPI_DEBUG opt_wpi.h 894 895# dcons options 896DCONS_BUF_SIZE opt_dcons.h 897DCONS_POLL_HZ opt_dcons.h 898DCONS_FORCE_CONSOLE opt_dcons.h 899DCONS_FORCE_GDB opt_dcons.h 900 901# HWPMC options 902HWPMC_DEBUG opt_global.h 903HWPMC_HOOKS 904HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h 905 906# 802.11 support layer 907IEEE80211_DEBUG opt_wlan.h 908IEEE80211_DEBUG_REFCNT opt_wlan.h 909IEEE80211_SUPPORT_MESH opt_wlan.h 910IEEE80211_SUPPORT_SUPERG opt_wlan.h 911IEEE80211_SUPPORT_TDMA opt_wlan.h 912IEEE80211_ALQ opt_wlan.h 913IEEE80211_DFS_DEBUG opt_wlan.h 914 915# 802.11 TDMA support 916TDMA_SLOTLEN_DEFAULT opt_tdma.h 917TDMA_SLOTCNT_DEFAULT opt_tdma.h 918TDMA_BINTVAL_DEFAULT opt_tdma.h 919TDMA_TXRATE_11B_DEFAULT opt_tdma.h 920TDMA_TXRATE_11G_DEFAULT opt_tdma.h 921TDMA_TXRATE_11A_DEFAULT opt_tdma.h 922TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 923TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 924TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 925TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 926TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 927 928# VideoMode 929PICKMODE_DEBUG opt_videomode.h 930 931# Network stack virtualization options 932VIMAGE opt_global.h 933VNET_DEBUG opt_global.h 934 935# Common Flash Interface (CFI) options 936CFI_SUPPORT_STRATAFLASH opt_cfi.h 937CFI_ARMEDANDDANGEROUS opt_cfi.h 938CFI_HARDWAREBYTESWAP opt_cfi.h 939 940# Sound options 941SND_DEBUG opt_snd.h 942SND_DIAGNOSTIC opt_snd.h 943SND_FEEDER_MULTIFORMAT opt_snd.h 944SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 945SND_FEEDER_RATE_HP opt_snd.h 946SND_PCM_64 opt_snd.h 947SND_OLDSTEREO opt_snd.h 948 949X86BIOS 950 951# Flattened device tree options 952FDT opt_platform.h 953FDT_DTB_STATIC opt_platform.h 954 955# OFED Infiniband stack 956OFED opt_ofed.h 957OFED_DEBUG_INIT opt_ofed.h 958SDP opt_ofed.h 959SDP_DEBUG opt_ofed.h 960IPOIB opt_ofed.h 961IPOIB_DEBUG opt_ofed.h 962IPOIB_CM opt_ofed.h 963 964# Resource Accounting 965RACCT opt_global.h 966RACCT_DEFAULT_TO_DISABLED opt_global.h 967 968# Resource Limits 969RCTL opt_global.h 970 971# Random number generator(s) 972# Alternative RNG algorithm. 973RANDOM_FENESTRASX opt_global.h 974# With this, no entropy processor is loaded, but the entropy 975# harvesting infrastructure is present. This means an entropy 976# processor may be loaded as a module. 977RANDOM_LOADABLE opt_global.h 978# This turns on high-rate and potentially expensive harvesting in 979# the uma slab allocator. 980RANDOM_ENABLE_UMA opt_global.h 981RANDOM_ENABLE_ETHER opt_global.h 982 983# This options turns TPM into entropy source. 984TPM_HARVEST opt_tpm.h 985 986# BHND(4) driver 987BHND_LOGLEVEL opt_global.h 988 989# GPIO and child devices 990GPIO_SPI_DEBUG opt_gpio.h 991 992# SPI devices 993SPIGEN_LEGACY_CDEVNAME opt_spi.h 994 995# etherswitch(4) driver 996RTL8366_SOFT_RESET opt_etherswitch.h 997 998# evdev protocol support 999EVDEV_SUPPORT opt_evdev.h 1000EVDEV_DEBUG opt_evdev.h 1001UINPUT_DEBUG opt_evdev.h 1002 1003# Hyper-V network driver 1004HN_DEBUG opt_hn.h 1005 1006# CAM-based MMC stack 1007MMCCAM 1008# Encrypted kernel crash dumps 1009EKCD opt_ekcd.h 1010 1011# NVME options 1012NVME_USE_NVD opt_nvme.h 1013NVME_2X_RESET opt_nvme.h 1014 1015# amdsbwd options 1016AMDSBWD_DEBUG opt_amdsbwd.h 1017 1018# gcov support 1019GCOV opt_global.h 1020LINDEBUGFS 1021 1022# options for HID support 1023HID_DEBUG opt_hid.h 1024IICHID_DEBUG opt_hid.h 1025IICHID_SAMPLING opt_hid.h 1026HKBD_DFLT_KEYMAP opt_hkbd.h 1027HIDRAW_MAKE_UHID_ALIAS opt_hid.h 1028 1029# kenv options 1030# The early kernel environment (loader environment, config(8)-provided static) 1031# is typically cleared after the dynamic environment comes up to ensure that 1032# we're not inadvertently holding on to 'secret' values in these stale envs. 1033# This option is insecure except in controlled environments where the static 1034# environment's contents are known to be safe. 1035PRESERVE_EARLY_KENV opt_global.h 1036