xref: /freebsd/sys/conf/options (revision 9517e866259191fcd39434a97ad849a9b59b9b9f)
1# $FreeBSD$
2#
3#        On the handling of kernel options
4#
5# All kernel options should be listed in NOTES, with suitable
6# descriptions.  Negative options (options that make some code not
7# compile) should be commented out; LINT (generated from NOTES) should
8# compile as much code as possible.  Try to structure option-using
9# code so that a single option only switch code on, or only switch
10# code off, to make it possible to have a full compile-test.  If
11# necessary, you can check for COMPILING_LINT to get maximum code
12# coverage.
13#
14# All new options shall also be listed in either "conf/options" or
15# "conf/options.<machine>".  Options that affect a single source-file
16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17# that affect multiple files should either go in "opt_global.h" if
18# this is a kernel-wide option (used just about everywhere), or in
19# "opt_<option-name-in-lower-case>.h" if it affects only some files.
20# Note that the effect of listing only an option without a
21# header-file-name in conf/options (and cousins) is that the last
22# convention is followed.
23#
24# This handling scheme is not yet fully implemented.
25#
26#
27# Format of this file:
28# Option name	filename
29#
30# If filename is missing, the default is
31# opt_<name-of-option-in-lower-case>.h
32
33AAC_DEBUG		opt_aac.h
34AHC_ALLOW_MEMIO		opt_aic7xxx.h
35AHC_TMODE_ENABLE	opt_aic7xxx.h
36AHC_DUMP_EEPROM		opt_aic7xxx.h
37AHC_DEBUG		opt_aic7xxx.h
38AHC_DEBUG_OPTS		opt_aic7xxx.h
39AHC_REG_PRETTY_PRINT	opt_aic7xxx.h
40AHD_DEBUG		opt_aic79xx.h
41AHD_DEBUG_OPTS		opt_aic79xx.h
42AHD_TMODE_ENABLE	opt_aic79xx.h
43AHD_REG_PRETTY_PRINT	opt_aic79xx.h
44ADW_ALLOW_MEMIO		opt_adw.h
45
46TWA_DEBUG		opt_twa.h
47TWA_FLASH_FIRMWARE	opt_twa.h
48
49# Debugging options.
50DDB
51DDB_BUFR_SIZE	opt_ddb.h
52DDB_CAPTURE_DEFAULTBUFSIZE	opt_ddb.h
53DDB_CAPTURE_MAXBUFSIZE	opt_ddb.h
54DDB_CTF		opt_ddb.h
55DDB_NUMSYM	opt_ddb.h
56GDB
57KDB		opt_global.h
58KDB_TRACE	opt_kdb.h
59KDB_UNATTENDED	opt_kdb.h
60SYSCTL_DEBUG	opt_sysctl.h
61
62# Miscellaneous options.
63ADAPTIVE_LOCKMGRS
64ALQ
65AUDIT		opt_global.h
66CODA_COMPAT_5	opt_coda.h
67COMPAT_43	opt_compat.h
68COMPAT_43TTY	opt_compat.h
69COMPAT_FREEBSD4	opt_compat.h
70COMPAT_FREEBSD5	opt_compat.h
71COMPAT_FREEBSD6	opt_compat.h
72COMPAT_FREEBSD7	opt_compat.h
73COMPILING_LINT	opt_global.h
74CY_PCI_FASTINTR
75DIRECTIO
76FULL_PREEMPTION	opt_sched.h
77IPI_PREEMPTION	opt_sched.h
78GEOM_AES	opt_geom.h
79GEOM_BDE	opt_geom.h
80GEOM_BSD	opt_geom.h
81GEOM_CACHE	opt_geom.h
82GEOM_CONCAT	opt_geom.h
83GEOM_ELI	opt_geom.h
84GEOM_FOX	opt_geom.h
85GEOM_GATE	opt_geom.h
86GEOM_JOURNAL	opt_geom.h
87GEOM_LABEL	opt_geom.h
88GEOM_LINUX_LVM	opt_geom.h
89GEOM_MBR	opt_geom.h
90GEOM_MIRROR	opt_geom.h
91GEOM_MULTIPATH	opt_geom.h
92GEOM_NOP	opt_geom.h
93GEOM_PART_APM	opt_geom.h
94GEOM_PART_BSD	opt_geom.h
95GEOM_PART_EBR	opt_geom.h
96GEOM_PART_EBR_COMPAT	opt_geom.h
97GEOM_PART_GPT	opt_geom.h
98GEOM_PART_MBR	opt_geom.h
99GEOM_PART_PC98	opt_geom.h
100GEOM_PART_VTOC8	opt_geom.h
101GEOM_PC98	opt_geom.h
102GEOM_RAID3	opt_geom.h
103GEOM_SHSEC	opt_geom.h
104GEOM_STRIPE	opt_geom.h
105GEOM_SUNLABEL	opt_geom.h
106GEOM_UZIP	opt_geom.h
107GEOM_VIRSTOR	opt_geom.h
108GEOM_VOL	opt_geom.h
109GEOM_ZERO	opt_geom.h
110KDTRACE_HOOKS	opt_kdtrace.h
111KSTACK_MAX_PAGES
112KSTACK_PAGES
113KTRACE
114KTRACE_REQUEST_POOL	opt_ktrace.h
115LIBICONV
116MAC		opt_global.h
117MAC_BIBA	opt_dontuse.h
118MAC_BSDEXTENDED	opt_dontuse.h
119MAC_IFOFF	opt_dontuse.h
120MAC_LOMAC	opt_dontuse.h
121MAC_MLS		opt_dontuse.h
122MAC_NONE	opt_dontuse.h
123MAC_PARTITION	opt_dontuse.h
124MAC_PORTACL	opt_dontuse.h
125MAC_SEEOTHERUIDS	opt_dontuse.h
126MAC_STATIC	opt_mac.h
127MAC_STUB	opt_dontuse.h
128MAC_TEST	opt_dontuse.h
129MD_ROOT		opt_md.h
130MD_ROOT_SIZE	opt_md.h
131MFI_DEBUG	opt_mfi.h
132MFI_DECODE_LOG	opt_mfi.h
133MPROF_BUFFERS	opt_mprof.h
134MPROF_HASH_SIZE	opt_mprof.h
135NO_ADAPTIVE_MUTEXES	opt_adaptive_mutexes.h
136NO_ADAPTIVE_RWLOCKS
137NO_ADAPTIVE_SX
138NO_SYSCTL_DESCR	opt_global.h
139NSWBUF_MIN	opt_swap.h
140MBUF_PACKET_ZONE_DISABLE	opt_global.h
141PANIC_REBOOT_WAIT_TIME	opt_panic.h
142PPC_DEBUG	opt_ppc.h
143PPC_PROBE_CHIPSET	opt_ppc.h
144PPS_SYNC	opt_ntp.h
145PREEMPTION	opt_sched.h
146QUOTA
147SCHED_4BSD	opt_sched.h
148SCHED_STATS	opt_sched.h
149SCHED_ULE	opt_sched.h
150SHOW_BUSYBUFS
151SLEEPQUEUE_PROFILING
152SLHCI_DEBUG	opt_slhci.h
153SPX_HACK
154STACK		opt_stack.h
155SUIDDIR
156MSGMNB		opt_sysvipc.h
157MSGMNI		opt_sysvipc.h
158MSGSEG		opt_sysvipc.h
159MSGSSZ		opt_sysvipc.h
160MSGTQL		opt_sysvipc.h
161SEMMAP		opt_sysvipc.h
162SEMMNI		opt_sysvipc.h
163SEMMNS		opt_sysvipc.h
164SEMMNU		opt_sysvipc.h
165SEMMSL		opt_sysvipc.h
166SEMOPM		opt_sysvipc.h
167SEMUME		opt_sysvipc.h
168SHMALL		opt_sysvipc.h
169SHMMAX		opt_sysvipc.h
170SHMMAXPGS	opt_sysvipc.h
171SHMMIN		opt_sysvipc.h
172SHMMNI		opt_sysvipc.h
173SHMSEG		opt_sysvipc.h
174SYSVMSG		opt_sysvipc.h
175SYSVSEM		opt_sysvipc.h
176SYSVSHM		opt_sysvipc.h
177SW_WATCHDOG	opt_watchdog.h
178TURNSTILE_PROFILING
179VFS_AIO
180VERBOSE_SYSINIT	opt_global.h
181WLCACHE		opt_wavelan.h
182WLDEBUG		opt_wavelan.h
183
184# POSIX kernel options
185P1003_1B_MQUEUE			opt_posix.h
186P1003_1B_SEMAPHORES		opt_posix.h
187_KPOSIX_PRIORITY_SCHEDULING	opt_posix.h
188
189# Do we want the config file compiled into the kernel?
190INCLUDE_CONFIG_FILE	opt_config.h
191
192# Options for static filesystems.  These should only be used at config
193# time, since the corresponding lkms cannot work if there are any static
194# dependencies.  Unusability is enforced by hiding the defines for the
195# options in a never-included header.
196CD9660		opt_dontuse.h
197CODA		opt_dontuse.h
198EXT2FS		opt_dontuse.h
199FDESCFS		opt_dontuse.h
200HPFS		opt_dontuse.h
201MSDOSFS		opt_dontuse.h
202NTFS		opt_dontuse.h
203NULLFS		opt_dontuse.h
204NWFS		opt_dontuse.h
205PORTALFS	opt_dontuse.h
206PROCFS		opt_dontuse.h
207PSEUDOFS	opt_dontuse.h
208REISERFS	opt_dontuse.h
209SMBFS		opt_dontuse.h
210TMPFS		opt_dontuse.h
211UDF		opt_dontuse.h
212UNIONFS		opt_dontuse.h
213
214# Pseudofs debugging
215PSEUDOFS_TRACE	opt_pseudofs.h
216
217# Broken - ffs_snapshot() dependency from ufs_lookup() :-(
218FFS		opt_ffs_broken_fixme.h
219
220# In-kernel GSS-API
221KGSSAPI		opt_kgssapi.h
222KGSSAPI_DEBUG	opt_kgssapi.h
223
224# These static filesystems have one slightly bogus static dependency in
225# sys/i386/i386/autoconf.c.  If any of these filesystems are
226# statically compiled into the kernel, code for mounting them as root
227# filesystems will be enabled - but look below.
228NFSCLIENT	opt_nfs.h
229NFSSERVER	opt_nfs.h
230
231# Use these options to compile the experimental nfs client and/or
232# server that supports NFSv4 into a kernel.
233# NFSCL - client
234# NFSD - server
235NFSCL		opt_nfs.h
236NFSD		opt_nfs.h
237
238# filesystems and libiconv bridge
239CD9660_ICONV	opt_dontuse.h
240MSDOSFS_ICONV	opt_dontuse.h
241NTFS_ICONV	opt_dontuse.h
242UDF_ICONV	opt_dontuse.h
243
244# If you are following the conditions in the copyright,
245# you can enable soft-updates which will speed up a lot of thigs
246# and make the system safer from crashes at the same time.
247# otherwise a STUB module will be compiled in.
248SOFTUPDATES	opt_ffs.h
249
250# On small, embedded systems, it can be useful to turn off support for
251# snapshots.  It saves about 30-40k for a feature that would be lightly
252# used, if it is used at all.
253NO_FFS_SNAPSHOT	opt_ffs.h
254
255# Enabling this option turns on support for Access Control Lists in UFS,
256# which can be used to support high security configurations.  Depends on
257# UFS_EXTATTR.
258UFS_ACL		opt_ufs.h
259
260# Enabling this option turns on support for extended attributes in UFS-based
261# filesystems, which can be used to support high security configurations
262# as well as new filesystem features.
263UFS_EXTATTR	opt_ufs.h
264UFS_EXTATTR_AUTOSTART	opt_ufs.h
265
266# Enable fast hash lookups for large directories on UFS-based filesystems.
267UFS_DIRHASH	opt_ufs.h
268
269# Enable gjournal-based UFS journal.
270UFS_GJOURNAL	opt_ufs.h
271
272# The below sentence is not in English, and neither is this one.
273# We plan to remove the static dependences above, with a
274# <filesystem>_ROOT option to control if it usable as root.  This list
275# allows these options to be present in config files already (though
276# they won't make any difference yet).
277NFS_ROOT	opt_nfsroot.h
278
279# SMB/CIFS requester
280NETSMB		opt_netsmb.h
281
282# Options used only in subr_param.c.
283HZ		opt_param.h
284MAXFILES	opt_param.h
285NBUF		opt_param.h
286NSFBUFS		opt_param.h
287VM_BCACHE_SIZE_MAX	opt_param.h
288VM_SWZONE_SIZE_MAX	opt_param.h
289MAXUSERS
290DFLDSIZ		opt_param.h
291MAXDSIZ		opt_param.h
292MAXSSIZ		opt_param.h
293
294# Generic SCSI options.
295CAM_MAX_HIGHPOWER	opt_cam.h
296CAMDEBUG		opt_cam.h
297CAM_DEBUG_DELAY		opt_cam.h
298CAM_DEBUG_BUS		opt_cam.h
299CAM_DEBUG_TARGET	opt_cam.h
300CAM_DEBUG_LUN		opt_cam.h
301CAM_DEBUG_FLAGS		opt_cam.h
302SCSI_DELAY		opt_scsi.h
303SCSI_NO_SENSE_STRINGS	opt_scsi.h
304SCSI_NO_OP_STRINGS	opt_scsi.h
305
306# Options used only in cam/scsi/scsi_cd.c
307CHANGER_MIN_BUSY_SECONDS	opt_cd.h
308CHANGER_MAX_BUSY_SECONDS	opt_cd.h
309
310# Options used only in cam/scsi/scsi_sa.c.
311SA_IO_TIMEOUT		opt_sa.h
312SA_SPACE_TIMEOUT	opt_sa.h
313SA_REWIND_TIMEOUT	opt_sa.h
314SA_ERASE_TIMEOUT	opt_sa.h
315SA_1FM_AT_EOD		opt_sa.h
316
317# Options used only in cam/scsi/scsi_pt.c
318SCSI_PT_DEFAULT_TIMEOUT	opt_pt.h
319
320# Options used only in cam/scsi/scsi_ses.c
321SES_ENABLE_PASSTHROUGH	opt_ses.h
322
323# Options used in dev/sym/ (Symbios SCSI driver).
324SYM_SETUP_LP_PROBE_MAP	opt_sym.h	#-Low Priority Probe Map (bits)
325					# Allows the ncr to take precedence
326					# 1 (1<<0) -> 810a, 860
327					# 2 (1<<1) -> 825a, 875, 885, 895
328					# 4 (1<<2) -> 895a, 896, 1510d
329SYM_SETUP_SCSI_DIFF	opt_sym.h	#-HVD support for 825a, 875, 885
330					# disabled:0 (default), enabled:1
331SYM_SETUP_PCI_PARITY	opt_sym.h	#-PCI parity checking
332					# disabled:0, enabled:1 (default)
333SYM_SETUP_MAX_LUN	opt_sym.h	#-Number of LUNs supported
334					# default:8, range:[1..64]
335
336# Options used only in pci/ncr.c
337SCSI_NCR_DEBUG		opt_ncr.h
338SCSI_NCR_MAX_SYNC	opt_ncr.h
339SCSI_NCR_MAX_WIDE	opt_ncr.h
340SCSI_NCR_MYADDR		opt_ncr.h
341
342# Options used only in dev/isp/*
343ISP_TARGET_MODE		opt_isp.h
344ISP_FW_CRASH_DUMP	opt_isp.h
345ISP_DEFAULT_ROLES	opt_isp.h
346
347# Options used only in dev/iscsi
348ISCSI_INITIATOR_DEBUG	opt_iscsi_initiator.h
349
350# Options used in the 'ata' ATA/ATAPI driver
351ATA_STATIC_ID		opt_ata.h
352ATA_NOPCI		opt_ata.h
353
354# Net stuff.
355ACCEPT_FILTER_DATA
356ACCEPT_FILTER_DNS
357ACCEPT_FILTER_HTTP
358ALTQ			opt_global.h
359ALTQ_CBQ		opt_altq.h
360ALTQ_CDNR		opt_altq.h
361ALTQ_DEBUG		opt_altq.h
362ALTQ_HFSC		opt_altq.h
363ALTQ_NOPCC		opt_altq.h
364ALTQ_PRIQ		opt_altq.h
365ALTQ_RED		opt_altq.h
366ALTQ_RIO		opt_altq.h
367BOOTP			opt_bootp.h
368BOOTP_BLOCKSIZE		opt_bootp.h
369BOOTP_COMPAT		opt_bootp.h
370BOOTP_NFSROOT		opt_bootp.h
371BOOTP_NFSV3		opt_bootp.h
372BOOTP_WIRED_TO		opt_bootp.h
373DEVICE_POLLING
374DEV_ENC			opt_enc.h
375DEV_PF			opt_pf.h
376DEV_PFLOG		opt_pf.h
377DEV_PFSYNC		opt_pf.h
378DEV_VLAN		opt_vlan.h
379DUMMYNET		opt_ipdn.h
380ETHER_8022		opt_ef.h
381ETHER_8023		opt_ef.h
382ETHER_II		opt_ef.h
383ETHER_SNAP		opt_ef.h
384INET			opt_inet.h
385INET6			opt_inet6.h
386IPDIVERT
387IPFILTER		opt_ipfilter.h
388IPFILTER_DEFAULT_BLOCK	opt_ipfilter.h
389IPFILTER_LOG		opt_ipfilter.h
390IPFILTER_LOOKUP		opt_ipfilter.h
391IPFIREWALL		opt_ipfw.h
392IPFIREWALL_DEFAULT_TO_ACCEPT	opt_ipfw.h
393IPFIREWALL_FORWARD	opt_ipfw.h
394IPFIREWALL_NAT		opt_ipfw.h
395IPFIREWALL_VERBOSE	opt_ipfw.h
396IPFIREWALL_VERBOSE_LIMIT	opt_ipfw.h
397IPSEC			opt_ipsec.h
398IPSEC_DEBUG		opt_ipsec.h
399IPSEC_FILTERTUNNEL	opt_ipsec.h
400IPSEC_NAT_T		opt_ipsec.h
401IPSTEALTH
402IPX
403KRPC
404LIBALIAS
405LIBMBPOOL
406LIBMCHAIN
407MBUF_PROFILING
408MBUF_STRESS_TEST
409MROUTING		opt_mrouting.h
410NCP
411NETATALK		opt_atalk.h
412NFSLOCKD
413RADIX_MPATH		opt_mpath.h
414ROUTETABLES		opt_route.h
415SLIP_IFF_OPTS		opt_slip.h
416TCPDEBUG
417TCP_OFFLOAD_DISABLE	opt_inet.h #Disable code to dispatch tcp offloading
418TCP_SIGNATURE		opt_inet.h
419VLAN_ARRAY		opt_vlan.h
420XBONEHACK
421FLOWTABLE		opt_route.h
422
423#
424# SCTP
425#
426SCTP			opt_sctp.h
427SCTP_DEBUG		opt_sctp.h # Enable debug printfs
428SCTP_WITH_NO_CSUM	opt_sctp.h # Use this at your peril
429SCTP_LOCK_LOGGING	opt_sctp.h # Log to KTR lock activity
430SCTP_MBUF_LOGGING	opt_sctp.h # Log to KTR general mbuf aloc/free
431SCTP_MBCNT_LOGGING	opt_sctp.h # Log to KTR mbcnt activity
432SCTP_PACKET_LOGGING	opt_sctp.h # Log to a packet buffer last N packets
433SCTP_LTRACE_CHUNKS	opt_sctp.h # Log to KTR chunks processed
434SCTP_LTRACE_ERRORS	opt_sctp.h # Log to KTR error returns.
435#
436#
437#
438
439# Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
440# Each netgraph node type can be either be compiled into the kernel
441# or loaded dynamically. To get the former, include the corresponding
442# option below. Each type has its own man page, e.g. ng_async(4).
443NETGRAPH
444NETGRAPH_DEBUG		opt_netgraph.h
445NETGRAPH_ASYNC		opt_netgraph.h
446NETGRAPH_ATMLLC		opt_netgraph.h
447NETGRAPH_ATM_ATMPIF	opt_netgraph.h
448NETGRAPH_BLUETOOTH	opt_netgraph.h
449NETGRAPH_BLUETOOTH_BT3C	opt_netgraph.h
450NETGRAPH_BLUETOOTH_H4	opt_netgraph.h
451NETGRAPH_BLUETOOTH_HCI	opt_netgraph.h
452NETGRAPH_BLUETOOTH_L2CAP	opt_netgraph.h
453NETGRAPH_BLUETOOTH_SOCKET	opt_netgraph.h
454NETGRAPH_BLUETOOTH_UBT	opt_netgraph.h
455NETGRAPH_BLUETOOTH_UBTBCMFW	opt_netgraph.h
456NETGRAPH_BPF		opt_netgraph.h
457NETGRAPH_BRIDGE		opt_netgraph.h
458NETGRAPH_CAR		opt_netgraph.h
459NETGRAPH_CISCO		opt_netgraph.h
460NETGRAPH_DEFLATE	opt_netgraph.h
461NETGRAPH_DEVICE		opt_netgraph.h
462NETGRAPH_ECHO		opt_netgraph.h
463NETGRAPH_EIFACE		opt_netgraph.h
464NETGRAPH_ETHER		opt_netgraph.h
465NETGRAPH_ETHER_ECHO	opt_netgraph.h
466NETGRAPH_FEC		opt_netgraph.h
467NETGRAPH_FRAME_RELAY	opt_netgraph.h
468NETGRAPH_GIF		opt_netgraph.h
469NETGRAPH_GIF_DEMUX	opt_netgraph.h
470NETGRAPH_HOLE		opt_netgraph.h
471NETGRAPH_IFACE		opt_netgraph.h
472NETGRAPH_IP_INPUT	opt_netgraph.h
473NETGRAPH_IPFW		opt_netgraph.h
474NETGRAPH_KSOCKET	opt_netgraph.h
475NETGRAPH_L2TP		opt_netgraph.h
476NETGRAPH_LMI		opt_netgraph.h
477# MPPC compression requires proprietary files (not included)
478NETGRAPH_MPPC_COMPRESSION	opt_netgraph.h
479NETGRAPH_MPPC_ENCRYPTION	opt_netgraph.h
480NETGRAPH_NAT		opt_netgraph.h
481NETGRAPH_NETFLOW	opt_netgraph.h
482NETGRAPH_ONE2MANY	opt_netgraph.h
483NETGRAPH_PIPE		opt_netgraph.h
484NETGRAPH_PPP		opt_netgraph.h
485NETGRAPH_PPPOE		opt_netgraph.h
486NETGRAPH_PPTPGRE	opt_netgraph.h
487NETGRAPH_PRED1		opt_netgraph.h
488NETGRAPH_RFC1490	opt_netgraph.h
489NETGRAPH_SOCKET		opt_netgraph.h
490NETGRAPH_SPLIT		opt_netgraph.h
491NETGRAPH_SPPP		opt_netgraph.h
492NETGRAPH_TAG		opt_netgraph.h
493NETGRAPH_TCPMSS		opt_netgraph.h
494NETGRAPH_TEE		opt_netgraph.h
495NETGRAPH_TTY		opt_netgraph.h
496NETGRAPH_UI		opt_netgraph.h
497NETGRAPH_VJC		opt_netgraph.h
498
499# NgATM options
500NGATM_ATM		opt_netgraph.h
501NGATM_ATMBASE		opt_netgraph.h
502NGATM_SSCOP		opt_netgraph.h
503NGATM_SSCFU		opt_netgraph.h
504NGATM_UNI		opt_netgraph.h
505NGATM_CCATM		opt_netgraph.h
506
507# DRM options
508DRM_DEBUG		opt_drm.h
509
510ZERO_COPY_SOCKETS	opt_zero.h
511TI_PRIVATE_JUMBOS	opt_ti.h
512TI_JUMBO_HDRSPLIT	opt_ti.h
513
514# XXX Conflict: # of devices vs network protocol (Native ATM).
515# This makes "atm.h" unusable.
516NATM
517
518# DPT driver debug flags
519DPT_MEASURE_PERFORMANCE	opt_dpt.h
520DPT_HANDLE_TIMEOUTS	opt_dpt.h
521DPT_TIMEOUT_FACTOR	opt_dpt.h
522DPT_LOST_IRQ		opt_dpt.h
523DPT_RESET_HBA		opt_dpt.h
524
525# Misc debug flags.  Most of these should probably be replaced with
526# 'DEBUG', and then let people recompile just the interesting modules
527# with 'make CC="cc -DDEBUG"'.
528CLUSTERDEBUG		opt_debug_cluster.h
529DEBUG_1284		opt_ppb_1284.h
530VP0_DEBUG		opt_vpo.h
531LPT_DEBUG		opt_lpt.h
532PLIP_DEBUG		opt_plip.h
533LOCKF_DEBUG		opt_debug_lockf.h
534NETATALKDEBUG		opt_atalk.h
535SI_DEBUG		opt_debug_si.h
536
537# Fb options
538FB_DEBUG		opt_fb.h
539FB_INSTALL_CDEV		opt_fb.h
540
541# ppbus related options
542PERIPH_1284		opt_ppb_1284.h
543DONTPROBE_1284		opt_ppb_1284.h
544
545# smbus related options
546ENABLE_ALART		opt_intpm.h
547
548# These cause changes all over the kernel
549BLKDEV_IOSIZE		opt_global.h
550BURN_BRIDGES		opt_global.h
551DEBUG			opt_global.h
552DEBUG_LOCKS		opt_global.h
553DEBUG_VFS_LOCKS		opt_global.h
554DFLTPHYS		opt_global.h
555DIAGNOSTIC		opt_global.h
556INVARIANT_SUPPORT	opt_global.h
557INVARIANTS		opt_global.h
558MAXPHYS			opt_global.h
559MCLSHIFT		opt_global.h
560MUTEX_DEBUG		opt_global.h
561MUTEX_NOINLINE		opt_global.h
562LOCK_PROFILING		opt_global.h
563LOCK_PROFILING_FAST	opt_global.h
564MSIZE			opt_global.h
565REGRESSION		opt_global.h
566RESTARTABLE_PANICS	opt_global.h
567RWLOCK_NOINLINE		opt_global.h
568SX_NOINLINE		opt_global.h
569VFS_BIO_DEBUG		opt_global.h
570
571# These are VM related options
572VM_KMEM_SIZE		opt_vm.h
573VM_KMEM_SIZE_SCALE	opt_vm.h
574VM_KMEM_SIZE_MAX	opt_vm.h
575VM_NRESERVLEVEL		opt_vm.h
576VM_LEVEL_0_ORDER	opt_vm.h
577NO_SWAPPING		opt_vm.h
578MALLOC_MAKE_FAILURES	opt_vm.h
579MALLOC_PROFILE		opt_vm.h
580
581# The MemGuard replacement allocator used for tamper-after-free detection
582DEBUG_MEMGUARD		opt_vm.h
583
584# The RedZone malloc(9) protection
585DEBUG_REDZONE		opt_vm.h
586
587# Standard SMP options
588SMP			opt_global.h
589
590# Size of the kernel message buffer
591MSGBUF_SIZE		opt_msgbuf.h
592
593# NFS options
594NFS_MINATTRTIMO		opt_nfs.h
595NFS_MAXATTRTIMO		opt_nfs.h
596NFS_MINDIRATTRTIMO	opt_nfs.h
597NFS_MAXDIRATTRTIMO	opt_nfs.h
598NFS_GATHERDELAY		opt_nfs.h
599NFS_WDELAYHASHSIZ	opt_nfs.h
600NFS_DEBUG		opt_nfs.h
601
602# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
603OVERRIDE_CARD			opt_bktr.h
604OVERRIDE_TUNER			opt_bktr.h
605OVERRIDE_DBX			opt_bktr.h
606OVERRIDE_MSP			opt_bktr.h
607BROOKTREE_SYSTEM_DEFAULT	opt_bktr.h
608BROOKTREE_ALLOC_PAGES		opt_bktr.h
609BKTR_OVERRIDE_CARD		opt_bktr.h
610BKTR_OVERRIDE_TUNER		opt_bktr.h
611BKTR_OVERRIDE_DBX		opt_bktr.h
612BKTR_OVERRIDE_MSP		opt_bktr.h
613BKTR_SYSTEM_DEFAULT		opt_bktr.h
614BKTR_ALLOC_PAGES		opt_bktr.h
615BKTR_USE_PLL			opt_bktr.h
616BKTR_GPIO_ACCESS		opt_bktr.h
617BKTR_NO_MSP_RESET		opt_bktr.h
618BKTR_430_FX_MODE		opt_bktr.h
619BKTR_SIS_VIA_MODE		opt_bktr.h
620BKTR_USE_FREEBSD_SMBUS		opt_bktr.h
621BKTR_NEW_MSP34XX_DRIVER		opt_bktr.h
622
623BREAK_TO_DEBUGGER	opt_comconsole.h
624ALT_BREAK_TO_DEBUGGER	opt_comconsole.h
625
626# Options to support PPS
627UART_PPS_ON_CTS		opt_uart.h
628
629# options for bus/device framework
630BUS_DEBUG		opt_bus.h
631
632# options for USB support
633USB_DEBUG		opt_usb.h
634USB_VERBOSE		opt_usb.h
635USB_EHCI_BIG_ENDIAN_DESC	opt_usb.h
636U3G_DEBUG		opt_u3g.h
637UKBD_DFLT_KEYMAP	opt_ukbd.h
638UPLCOM_INTR_INTERVAL	opt_uplcom.h
639UVSCOM_DEFAULT_OPKTSIZE	opt_uvscom.h
640UVSCOM_INTR_INTERVAL	opt_uvscom.h
641
642# Embedded system options
643INIT_PATH
644
645ROOTDEVNAME
646
647FDC_DEBUG		opt_fdc.h
648PCFCLOCK_VERBOSE	opt_pcfclock.h
649PCFCLOCK_MAX_RETRIES	opt_pcfclock.h
650
651KTR			opt_global.h
652KTR_ALQ			opt_ktr.h
653KTR_MASK		opt_ktr.h
654KTR_CPUMASK		opt_ktr.h
655KTR_COMPILE		opt_global.h
656KTR_ENTRIES		opt_global.h
657KTR_VERBOSE		opt_ktr.h
658WITNESS			opt_global.h
659WITNESS_KDB		opt_witness.h
660WITNESS_SKIPSPIN	opt_witness.h
661
662# options for ACPI support
663ACPI_DEBUG		opt_acpi.h
664ACPI_MAX_TASKS		opt_acpi.h
665ACPI_MAX_THREADS	opt_acpi.h
666
667# ISA support
668DEV_ISA			opt_isa.h
669ISAPNP			opt_isa.h
670
671# various 'device presence' options.
672DEV_BPF			opt_bpf.h
673DEV_MCA			opt_mca.h
674DEV_CARP		opt_carp.h
675DEV_PTY			opt_tty.h
676DEV_SPLASH		opt_splash.h
677
678# EISA support
679DEV_EISA		opt_eisa.h
680EISA_SLOTS		opt_eisa.h
681
682# ed driver
683ED_HPP			opt_ed.h
684ED_3C503		opt_ed.h
685ED_SIC			opt_ed.h
686
687# bce driver
688BCE_DEBUG		opt_bce.h
689
690SOCKBUF_DEBUG		opt_global.h
691
692# options for ubsec driver
693UBSEC_DEBUG		opt_ubsec.h
694UBSEC_RNDTEST		opt_ubsec.h
695UBSEC_NO_RNG		opt_ubsec.h
696
697# options for hifn driver
698HIFN_DEBUG		opt_hifn.h
699HIFN_RNDTEST		opt_hifn.h
700
701# options for safenet driver
702SAFE_DEBUG		opt_safe.h
703SAFE_NO_RNG		opt_safe.h
704SAFE_RNDTEST		opt_safe.h
705
706# syscons options
707MAXCONS			opt_syscons.h
708SC_ALT_MOUSE_IMAGE	opt_syscons.h
709SC_CUT_SPACES2TABS	opt_syscons.h
710SC_CUT_SEPCHARS		opt_syscons.h
711SC_DEBUG_LEVEL		opt_syscons.h
712SC_DFLT_FONT		opt_syscons.h
713SC_DISABLE_KDBKEY	opt_syscons.h
714SC_DISABLE_REBOOT	opt_syscons.h
715SC_HISTORY_SIZE		opt_syscons.h
716SC_KERNEL_CONS_ATTR	opt_syscons.h
717SC_KERNEL_CONS_REV_ATTR	opt_syscons.h
718SC_MOUSE_CHAR		opt_syscons.h
719SC_NO_CUTPASTE		opt_syscons.h
720SC_NO_FONT_LOADING	opt_syscons.h
721SC_NO_HISTORY		opt_syscons.h
722SC_NO_MODE_CHANGE	opt_syscons.h
723SC_NO_SUSPEND_VTYSWITCH	opt_syscons.h
724SC_NO_SYSMOUSE		opt_syscons.h
725SC_NORM_ATTR		opt_syscons.h
726SC_NORM_REV_ATTR	opt_syscons.h
727SC_PIXEL_MODE		opt_syscons.h
728SC_RENDER_DEBUG		opt_syscons.h
729SC_TWOBUTTON_MOUSE	opt_syscons.h
730
731# teken terminal emulator options
732TEKEN_UTF8		opt_teken.h
733TEKEN_XTERM		opt_teken.h
734
735# options for printf
736PRINTF_BUFR_SIZE	opt_printf.h
737
738# kbd options
739KBD_DISABLE_KEYMAP_LOAD	opt_kbd.h
740KBD_INSTALL_CDEV	opt_kbd.h
741KBD_MAXRETRY		opt_kbd.h
742KBD_MAXWAIT		opt_kbd.h
743KBD_RESETDELAY		opt_kbd.h
744KBDIO_DEBUG		opt_kbd.h
745
746# options for the Atheros driver
747ATH_DEBUG		opt_ath.h
748ATH_TXBUF		opt_ath.h
749ATH_RXBUF		opt_ath.h
750ATH_DIAGAPI		opt_ath.h
751ATH_TX99_DIAG		opt_ath.h
752
753# options for the Atheros hal
754AH_SUPPORT_AR5416	opt_ah.h
755
756AH_DEBUG		opt_ah.h
757AH_ASSERT		opt_ah.h
758AH_DEBUG_ALQ		opt_ah.h
759AH_REGOPS_FUNC		opt_ah.h
760AH_WRITE_REGDOMAIN	opt_ah.h
761AH_DEBUG_COUNTRY	opt_ah.h
762AH_WRITE_EEPROM		opt_ah.h
763AH_PRIVATE_DIAG		opt_ah.h
764AH_NEED_DESC_SWAP	opt_ah.h
765AH_USE_INIPDGAIN	opt_ah.h
766AH_MAXCHAN		opt_ah.h
767
768# options for the Broadcom BCM43xx driver (bwi)
769BWI_DEBUG		opt_bwi.h
770BWI_DEBUG_VERBOSE	opt_bwi.h
771
772# options for the Marvell 8335 wireless driver
773MALO_DEBUG		opt_malo.h
774MALO_TXBUF		opt_malo.h
775MALO_RXBUF		opt_malo.h
776
777# options for the Marvell wireless driver
778MWL_DEBUG		opt_mwl.h
779MWL_TXBUF		opt_mwl.h
780MWL_RXBUF		opt_mwl.h
781MWL_DIAGAPI		opt_mwl.h
782MWL_AGGR_SIZE		opt_mwl.h
783MWL_TX_NODROP		opt_mwl.h
784
785# dcons options
786DCONS_BUF_SIZE		opt_dcons.h
787DCONS_POLL_HZ		opt_dcons.h
788DCONS_FORCE_CONSOLE	opt_dcons.h
789DCONS_FORCE_GDB		opt_dcons.h
790
791# HWPMC options
792HWPMC_HOOKS
793
794# XBOX options for FreeBSD/i386, but some files are MI
795XBOX			opt_xbox.h
796
797# XFS
798XFS
799
800# Interrupt filtering
801INTR_FILTER
802
803# 802.11 support layer
804IEEE80211_DEBUG		opt_wlan.h
805IEEE80211_DEBUG_REFCNT	opt_wlan.h
806IEEE80211_AMPDU_AGE	opt_wlan.h
807IEEE80211_SUPPORT_MESH	opt_wlan.h
808IEEE80211_SUPPORT_SUPERG	opt_wlan.h
809IEEE80211_SUPPORT_TDMA	opt_wlan.h
810
811# 802.11 TDMA support
812TDMA_SLOTLEN_DEFAULT	opt_tdma.h
813TDMA_SLOTCNT_DEFAULT	opt_tdma.h
814TDMA_BINTVAL_DEFAULT	opt_tdma.h
815TDMA_TXRATE_11B_DEFAULT	opt_tdma.h
816TDMA_TXRATE_11G_DEFAULT	opt_tdma.h
817TDMA_TXRATE_11A_DEFAULT	opt_tdma.h
818TDMA_TXRATE_TURBO_DEFAULT	opt_tdma.h
819TDMA_TXRATE_HALF_DEFAULT	opt_tdma.h
820TDMA_TXRATE_QUARTER_DEFAULT	opt_tdma.h
821TDMA_TXRATE_11NA_DEFAULT	opt_tdma.h
822TDMA_TXRATE_11NG_DEFAULT	opt_tdma.h
823
824# Virtualize the network stack
825VIMAGE			opt_global.h
826
827# Common Flash Interface (CFI) options
828CFI_SUPPORT_STRATAFLASH	opt_cfi.h
829CFI_ARMEDANDDANGEROUS	opt_cfi.h
830
831# Sound options
832SND_DEBUG		opt_snd.h
833SND_DIAGNOSTIC		opt_snd.h
834SND_FEEDER_MULTIFORMAT	opt_snd.h
835SND_FEEDER_FULL_MULTIFORMAT	opt_snd.h
836SND_FEEDER_RATE_HP	opt_snd.h
837SND_PCM_64		opt_snd.h
838SND_OLDSTEREO		opt_snd.h
839