1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affects only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AACRAID_DEBUG opt_aacraid.h 35AHC_ALLOW_MEMIO opt_aic7xxx.h 36AHC_TMODE_ENABLE opt_aic7xxx.h 37AHC_DUMP_EEPROM opt_aic7xxx.h 38AHC_DEBUG opt_aic7xxx.h 39AHC_DEBUG_OPTS opt_aic7xxx.h 40AHC_REG_PRETTY_PRINT opt_aic7xxx.h 41AHD_DEBUG opt_aic79xx.h 42AHD_DEBUG_OPTS opt_aic79xx.h 43AHD_TMODE_ENABLE opt_aic79xx.h 44AHD_REG_PRETTY_PRINT opt_aic79xx.h 45 46# Debugging options. 47ALT_BREAK_TO_DEBUGGER opt_kdb.h 48BREAK_TO_DEBUGGER opt_kdb.h 49BUF_TRACKING opt_global.h 50DDB 51DDB_BUFR_SIZE opt_ddb.h 52DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 53DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 54DDB_CTF opt_ddb.h 55DDB_NUMSYM opt_ddb.h 56EARLY_PRINTF opt_global.h 57FULL_BUF_TRACKING opt_global.h 58GDB 59KDB opt_global.h 60KDB_TRACE opt_kdb.h 61KDB_UNATTENDED opt_kdb.h 62KLD_DEBUG opt_kld.h 63NUM_CORE_FILES opt_global.h 64QUEUE_MACRO_DEBUG_TRACE opt_global.h 65QUEUE_MACRO_DEBUG_TRASH opt_global.h 66SYSCTL_DEBUG opt_sysctl.h 67TEXTDUMP_PREFERRED opt_ddb.h 68TEXTDUMP_VERBOSE opt_ddb.h 69TSLOG opt_global.h 70TSLOGSIZE opt_global.h 71 72# Miscellaneous options. 73ALQ 74ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h 75ATSE_CFI_HACK opt_cfi.h 76AUDIT opt_global.h 77BOOTHOWTO opt_global.h 78BOOTVERBOSE opt_global.h 79CALLOUT_PROFILING 80CAPABILITIES opt_capsicum.h 81CAPABILITY_MODE opt_capsicum.h 82CC_CDG opt_global.h 83CC_CHD opt_global.h 84CC_CUBIC opt_global.h 85CC_DEFAULT opt_cc.h 86CC_DCTCP opt_global.h 87CC_HD opt_global.h 88CC_HTCP opt_global.h 89CC_NEWRENO opt_global.h 90CC_VEGAS opt_global.h 91COMPAT_43 opt_global.h 92COMPAT_43TTY opt_global.h 93COMPAT_FREEBSD4 opt_global.h 94COMPAT_FREEBSD5 opt_global.h 95COMPAT_FREEBSD6 opt_global.h 96COMPAT_FREEBSD7 opt_global.h 97COMPAT_FREEBSD9 opt_global.h 98COMPAT_FREEBSD10 opt_global.h 99COMPAT_FREEBSD11 opt_global.h 100COMPAT_FREEBSD12 opt_global.h 101COMPAT_FREEBSD13 opt_global.h 102COMPAT_LINUXKPI opt_dontuse.h 103COMPILING_LINT opt_global.h 104CY_PCI_FASTINTR 105DEADLKRES opt_watchdog.h 106EXPERIMENTAL opt_global.h 107DIRECTIO 108FILEMON opt_dontuse.h 109FFCLOCK 110FULL_PREEMPTION opt_sched.h 111GZIO opt_gzio.h 112IMGACT_BINMISC opt_dontuse.h 113IPI_PREEMPTION opt_sched.h 114GEOM_BDE opt_geom.h 115GEOM_CACHE opt_geom.h 116GEOM_CONCAT opt_geom.h 117GEOM_ELI opt_geom.h 118GEOM_GATE opt_geom.h 119GEOM_JOURNAL opt_geom.h 120GEOM_LABEL opt_geom.h 121GEOM_LABEL_GPT opt_geom.h 122GEOM_LINUX_LVM opt_geom.h 123GEOM_MAP opt_geom.h 124GEOM_MIRROR opt_geom.h 125GEOM_MOUNTVER opt_geom.h 126GEOM_MULTIPATH opt_geom.h 127GEOM_NOP opt_geom.h 128GEOM_PART_APM opt_geom.h 129GEOM_PART_BSD opt_geom.h 130GEOM_PART_BSD64 opt_geom.h 131GEOM_PART_EBR opt_geom.h 132GEOM_PART_GPT opt_geom.h 133GEOM_PART_LDM opt_geom.h 134GEOM_PART_MBR opt_geom.h 135GEOM_PART_VTOC8 opt_geom.h 136GEOM_RAID opt_geom.h 137GEOM_RAID3 opt_geom.h 138GEOM_SHSEC opt_geom.h 139GEOM_STRIPE opt_geom.h 140GEOM_UZIP opt_geom.h 141GEOM_UZIP_DEBUG opt_geom.h 142GEOM_VINUM opt_geom.h 143GEOM_VIRSTOR opt_geom.h 144GEOM_ZERO opt_geom.h 145IFLIB opt_iflib.h 146KDTRACE_HOOKS opt_global.h 147KDTRACE_FRAME opt_kdtrace.h 148KN_HASHSIZE opt_kqueue.h 149KSTACK_MAX_PAGES 150KSTACK_PAGES 151KSTACK_USAGE_PROF 152KTRACE 153KTRACE_REQUEST_POOL opt_ktrace.h 154LIBICONV 155MAC opt_global.h 156MAC_BIBA opt_dontuse.h 157MAC_BSDEXTENDED opt_dontuse.h 158MAC_DDB opt_dontuse.h 159MAC_IFOFF opt_dontuse.h 160MAC_LOMAC opt_dontuse.h 161MAC_MLS opt_dontuse.h 162MAC_NONE opt_dontuse.h 163MAC_NTPD opt_dontuse.h 164MAC_PARTITION opt_dontuse.h 165MAC_PORTACL opt_dontuse.h 166MAC_PRIORITY opt_dontuse.h 167MAC_SEEOTHERUIDS opt_dontuse.h 168MAC_STATIC opt_mac.h 169MAC_STUB opt_dontuse.h 170MAC_TEST opt_dontuse.h 171MAC_VERIEXEC opt_dontuse.h 172MAC_VERIEXEC_SHA1 opt_dontuse.h 173MAC_VERIEXEC_SHA256 opt_dontuse.h 174MAC_VERIEXEC_SHA384 opt_dontuse.h 175MAC_VERIEXEC_SHA512 opt_dontuse.h 176MD_ROOT opt_md.h 177MD_ROOT_FSTYPE opt_md.h 178MD_ROOT_READONLY opt_md.h 179MD_ROOT_SIZE opt_md.h 180MD_ROOT_MEM opt_md.h 181MFI_DEBUG opt_mfi.h 182MFI_DECODE_LOG opt_mfi.h 183MPROF_BUFFERS opt_mprof.h 184MPROF_HASH_SIZE opt_mprof.h 185NEW_PCIB opt_global.h 186NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 187NO_ADAPTIVE_RWLOCKS 188NO_ADAPTIVE_SX 189NO_OBSOLETE_CODE opt_global.h 190NO_SYSCTL_DESCR opt_global.h 191NSWBUF_MIN opt_param.h 192MBUF_PACKET_ZONE_DISABLE opt_global.h 193PANIC_REBOOT_WAIT_TIME opt_panic.h 194PCI_HP opt_pci.h 195PCI_IOV opt_global.h 196PPC_DEBUG opt_ppc.h 197PPC_PROBE_CHIPSET opt_ppc.h 198PPS_SYNC opt_ntp.h 199PREEMPTION opt_sched.h 200QUOTA 201SCHED_4BSD opt_sched.h 202SCHED_STATS opt_sched.h 203SCHED_ULE opt_sched.h 204SLEEPQUEUE_PROFILING 205SLHCI_DEBUG opt_slhci.h 206STACK opt_stack.h 207SUIDDIR 208MSGMNB opt_sysvipc.h 209MSGMNI opt_sysvipc.h 210MSGSEG opt_sysvipc.h 211MSGSSZ opt_sysvipc.h 212MSGTQL opt_sysvipc.h 213SEMMNI opt_sysvipc.h 214SEMMNS opt_sysvipc.h 215SEMMNU opt_sysvipc.h 216SEMMSL opt_sysvipc.h 217SEMOPM opt_sysvipc.h 218SEMUME opt_sysvipc.h 219SHMALL opt_sysvipc.h 220SHMMAX opt_sysvipc.h 221SHMMAXPGS opt_sysvipc.h 222SHMMIN opt_sysvipc.h 223SHMMNI opt_sysvipc.h 224SHMSEG opt_sysvipc.h 225SYSVMSG opt_sysvipc.h 226SYSVSEM opt_sysvipc.h 227SYSVSHM opt_sysvipc.h 228SW_WATCHDOG opt_watchdog.h 229TCPHPTS opt_inet.h 230TCP_REQUEST_TRK opt_global.h 231TCP_ACCOUNTING opt_inet.h 232TURNSTILE_PROFILING 233UMTX_PROFILING 234UMTX_CHAINS opt_global.h 235VERBOSE_SYSINIT 236ZSTDIO opt_zstdio.h 237 238# Sanitizers 239COVERAGE opt_global.h 240KASAN opt_global.h 241KCOV 242KCSAN opt_global.h 243KMSAN opt_global.h 244KUBSAN opt_global.h 245 246# POSIX kernel options 247P1003_1B_MQUEUE opt_posix.h 248P1003_1B_SEMAPHORES opt_posix.h 249_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 250 251# Do we want the config file compiled into the kernel? 252INCLUDE_CONFIG_FILE opt_config.h 253 254# Options for static filesystems. These should only be used at config 255# time, since the corresponding lkms cannot work if there are any static 256# dependencies. Unusability is enforced by hiding the defines for the 257# options in a never-included header. 258AUTOFS opt_dontuse.h 259CD9660 opt_dontuse.h 260EXT2FS opt_dontuse.h 261FDESCFS opt_dontuse.h 262FFS opt_dontuse.h 263FUSEFS opt_dontuse.h 264MSDOSFS opt_dontuse.h 265NULLFS opt_dontuse.h 266PROCFS opt_dontuse.h 267PSEUDOFS opt_dontuse.h 268SMBFS opt_dontuse.h 269TARFS opt_dontuse.h 270TMPFS opt_dontuse.h 271UDF opt_dontuse.h 272UNIONFS opt_dontuse.h 273ZFS opt_dontuse.h 274 275# Pseudofs debugging 276PSEUDOFS_TRACE opt_pseudofs.h 277 278# Tarfs debugging 279TARFS_DEBUG opt_tarfs.h 280 281# In-kernel GSS-API 282KGSSAPI opt_kgssapi.h 283KGSSAPI_DEBUG opt_kgssapi.h 284 285# These static filesystems have one slightly bogus static dependency in 286# sys/i386/i386/autoconf.c. If any of these filesystems are 287# statically compiled into the kernel, code for mounting them as root 288# filesystems will be enabled - but look below. 289# NFSCL - client 290# NFSD - server 291NFSCL opt_nfs.h 292NFSD opt_nfs.h 293 294# filesystems and libiconv bridge 295CD9660_ICONV opt_dontuse.h 296MSDOSFS_ICONV opt_dontuse.h 297UDF_ICONV opt_dontuse.h 298 299# If you are following the conditions in the copyright, 300# you can enable soft-updates which will speed up a lot of thigs 301# and make the system safer from crashes at the same time. 302# otherwise a STUB module will be compiled in. 303SOFTUPDATES opt_ffs.h 304 305# On small, embedded systems, it can be useful to turn off support for 306# snapshots. It saves about 30-40k for a feature that would be lightly 307# used, if it is used at all. 308NO_FFS_SNAPSHOT opt_ffs.h 309 310# Enabling this option turns on support for Access Control Lists in UFS, 311# which can be used to support high security configurations. Depends on 312# UFS_EXTATTR. 313UFS_ACL opt_ufs.h 314 315# Enabling this option turns on support for extended attributes in UFS-based 316# filesystems, which can be used to support high security configurations 317# as well as new filesystem features. 318UFS_EXTATTR opt_ufs.h 319UFS_EXTATTR_AUTOSTART opt_ufs.h 320 321# Enable fast hash lookups for large directories on UFS-based filesystems. 322UFS_DIRHASH opt_ufs.h 323 324# Enable gjournal-based UFS journal. 325UFS_GJOURNAL opt_ufs.h 326 327# The below sentence is not in English, and neither is this one. 328# We plan to remove the static dependences above, with a 329# <filesystem>_ROOT option to control if it usable as root. This list 330# allows these options to be present in config files already (though 331# they won't make any difference yet). 332NFS_ROOT opt_nfsroot.h 333 334# SMB/CIFS requester 335NETSMB opt_netsmb.h 336 337# Enable debugnet(4) networking support. 338DEBUGNET opt_global.h 339# Enable netdump(4) client support. 340NETDUMP opt_global.h 341# Enable netgdb(4) support. 342NETGDB opt_global.h 343 344# Options used only in subr_param.c. 345HZ opt_param.h 346MAXFILES opt_param.h 347NBUF opt_param.h 348NSFBUFS opt_param.h 349VM_BCACHE_SIZE_MAX opt_param.h 350VM_SWZONE_SIZE_MAX opt_param.h 351MAXUSERS 352DFLDSIZ opt_param.h 353MAXDSIZ opt_param.h 354MAXSSIZ opt_param.h 355 356# Generic SCSI options. 357CAM_MAX_HIGHPOWER opt_cam.h 358CAMDEBUG opt_cam.h 359CAM_DEBUG_COMPILE opt_cam.h 360CAM_DEBUG_DELAY opt_cam.h 361CAM_DEBUG_BUS opt_cam.h 362CAM_DEBUG_TARGET opt_cam.h 363CAM_DEBUG_LUN opt_cam.h 364CAM_DEBUG_FLAGS opt_cam.h 365CAM_BOOT_DELAY opt_cam.h 366CAM_IOSCHED_DYNAMIC opt_cam.h 367CAM_IO_STATS opt_cam.h 368CAM_TEST_FAILURE opt_cam.h 369SCSI_DELAY opt_scsi.h 370SCSI_NO_SENSE_STRINGS opt_scsi.h 371SCSI_NO_OP_STRINGS opt_scsi.h 372 373# Options used only in cam/ata/ata_da.c 374ATA_STATIC_ID opt_ada.h 375 376# Options used only in cam/scsi/scsi_cd.c 377CHANGER_MIN_BUSY_SECONDS opt_cd.h 378CHANGER_MAX_BUSY_SECONDS opt_cd.h 379 380# Options used only in cam/scsi/scsi_da.c 381DA_TRACK_REFS opt_da.h 382 383# Options used only in cam/scsi/scsi_sa.c. 384SA_IO_TIMEOUT opt_sa.h 385SA_SPACE_TIMEOUT opt_sa.h 386SA_REWIND_TIMEOUT opt_sa.h 387SA_ERASE_TIMEOUT opt_sa.h 388SA_1FM_AT_EOD opt_sa.h 389 390# Options used only in cam/scsi/scsi_pt.c 391SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 392 393# Options used only in cam/scsi/scsi_ses.c 394SES_ENABLE_PASSTHROUGH opt_ses.h 395 396# Options used in dev/sym/ (Symbios SCSI driver). 397SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 398 # disabled:0 (default), enabled:1 399SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 400 # disabled:0, enabled:1 (default) 401SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 402 # default:8, range:[1..64] 403 404# Options used only in dev/isp/* 405ISP_TARGET_MODE opt_isp.h 406ISP_FW_CRASH_DUMP opt_isp.h 407ISP_DEFAULT_ROLES opt_isp.h 408ISP_INTERNAL_TARGET opt_isp.h 409ISP_FCTAPE_OFF opt_isp.h 410 411# Options used only in dev/iscsi 412ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 413 414# Net stuff. 415ACCEPT_FILTER_DATA 416ACCEPT_FILTER_DNS 417ACCEPT_FILTER_HTTP 418ALTQ opt_global.h 419ALTQ_CBQ opt_altq.h 420ALTQ_CDNR opt_altq.h 421ALTQ_CODEL opt_altq.h 422ALTQ_DEBUG opt_altq.h 423ALTQ_HFSC opt_altq.h 424ALTQ_FAIRQ opt_altq.h 425ALTQ_NOPCC opt_altq.h 426ALTQ_PRIQ opt_altq.h 427ALTQ_RED opt_altq.h 428ALTQ_RIO opt_altq.h 429BOOTP opt_bootp.h 430BOOTP_BLOCKSIZE opt_bootp.h 431BOOTP_COMPAT opt_bootp.h 432BOOTP_NFSROOT opt_bootp.h 433BOOTP_NFSV3 opt_bootp.h 434BOOTP_WIRED_TO opt_bootp.h 435DEVICE_POLLING 436DUMMYNET opt_ipdn.h 437RATELIMIT opt_ratelimit.h 438RATELIMIT_DEBUG opt_ratelimit.h 439INET opt_inet.h 440INET6 opt_inet6.h 441STATS opt_global.h 442IPDIVERT 443IPFILTER opt_ipfilter.h 444IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 445IPFILTER_LOG opt_ipfilter.h 446IPFILTER_LOOKUP opt_ipfilter.h 447IPFIREWALL opt_ipfw.h 448IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 449IPFIREWALL_NAT opt_ipfw.h 450IPFIREWALL_NAT64 opt_ipfw.h 451IPFIREWALL_NPTV6 opt_ipfw.h 452IPFIREWALL_VERBOSE opt_ipfw.h 453IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 454IPFIREWALL_PMOD opt_ipfw.h 455IPSEC opt_ipsec.h 456IPSEC_DEBUG opt_ipsec.h 457IPSEC_SUPPORT opt_ipsec.h 458IPSTEALTH 459KERN_TLS 460KRPC 461LIBALIAS 462LIBMCHAIN 463MBUF_PROFILING 464MBUF_STRESS_TEST 465MROUTING opt_mrouting.h 466NFSLOCKD 467NETLINK opt_netlink.h 468PF_DEFAULT_TO_DROP opt_pf.h 469ROUTE_MPATH opt_route.h 470ROUTETABLES opt_route.h 471FIB_ALGO opt_route.h 472RSS opt_rss.h 473SLIP_IFF_OPTS opt_slip.h 474TCPPCAP opt_global.h 475SIFTR 476TCP_BLACKBOX opt_global.h 477TCP_HHOOK opt_global.h 478TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading 479TCP_RFC7413 opt_inet.h 480TCP_RFC7413_MAX_KEYS opt_inet.h 481TCP_RFC7413_MAX_PSKS opt_inet.h 482TCP_SIGNATURE opt_ipsec.h 483VLAN_ARRAY opt_vlan.h 484XDR 485XBONEHACK 486 487# 488# SCTP 489# 490SCTP opt_sctp.h 491SCTP_SUPPORT opt_sctp.h 492SCTP_DEBUG opt_sctp.h # Enable debug printfs 493SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 494SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 495SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 496SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 497SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 498SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 499SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 500SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 501SCTP_LOCAL_TRACE_BUF opt_sctp.h # Use tracebuffer exported via sysctl 502SCTP_DETAILED_STR_STATS opt_sctp.h # Use per PR-SCTP policy stream stats 503# 504# 505# 506 507# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 508# Each netgraph node type can be either be compiled into the kernel 509# or loaded dynamically. To get the former, include the corresponding 510# option below. Each type has its own man page, e.g. ng_async(4). 511NETGRAPH 512NETGRAPH_DEBUG opt_netgraph.h 513NETGRAPH_ASYNC opt_netgraph.h 514NETGRAPH_BLUETOOTH opt_netgraph.h 515NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 516NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 517NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 518NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 519NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 520NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 521NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 522NETGRAPH_BPF opt_netgraph.h 523NETGRAPH_BRIDGE opt_netgraph.h 524NETGRAPH_CAR opt_netgraph.h 525NETGRAPH_CHECKSUM opt_netgraph.h 526NETGRAPH_CISCO opt_netgraph.h 527NETGRAPH_DEFLATE opt_netgraph.h 528NETGRAPH_DEVICE opt_netgraph.h 529NETGRAPH_ECHO opt_netgraph.h 530NETGRAPH_EIFACE opt_netgraph.h 531NETGRAPH_ETHER opt_netgraph.h 532NETGRAPH_ETHER_ECHO opt_netgraph.h 533NETGRAPH_FEC opt_netgraph.h 534NETGRAPH_FRAME_RELAY opt_netgraph.h 535NETGRAPH_GIF opt_netgraph.h 536NETGRAPH_GIF_DEMUX opt_netgraph.h 537NETGRAPH_HOLE opt_netgraph.h 538NETGRAPH_IFACE opt_netgraph.h 539NETGRAPH_IP_INPUT opt_netgraph.h 540NETGRAPH_IPFW opt_netgraph.h 541NETGRAPH_KSOCKET opt_netgraph.h 542NETGRAPH_L2TP opt_netgraph.h 543NETGRAPH_LMI opt_netgraph.h 544NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 545NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 546NETGRAPH_NAT opt_netgraph.h 547NETGRAPH_NETFLOW opt_netgraph.h 548NETGRAPH_ONE2MANY opt_netgraph.h 549NETGRAPH_PATCH opt_netgraph.h 550NETGRAPH_PIPE opt_netgraph.h 551NETGRAPH_PPP opt_netgraph.h 552NETGRAPH_PPPOE opt_netgraph.h 553NETGRAPH_PPTPGRE opt_netgraph.h 554NETGRAPH_PRED1 opt_netgraph.h 555NETGRAPH_RFC1490 opt_netgraph.h 556NETGRAPH_SOCKET opt_netgraph.h 557NETGRAPH_SPLIT opt_netgraph.h 558NETGRAPH_SPPP opt_netgraph.h 559NETGRAPH_TAG opt_netgraph.h 560NETGRAPH_TCPMSS opt_netgraph.h 561NETGRAPH_TEE opt_netgraph.h 562NETGRAPH_TTY opt_netgraph.h 563NETGRAPH_UI opt_netgraph.h 564NETGRAPH_VJC opt_netgraph.h 565NETGRAPH_VLAN opt_netgraph.h 566 567# DRM options 568DRM_DEBUG opt_drm.h 569 570TI_SF_BUF_JUMBO opt_ti.h 571TI_JUMBO_HDRSPLIT opt_ti.h 572 573# Misc debug flags. Most of these should probably be replaced with 574# 'DEBUG', and then let people recompile just the interesting modules 575# with 'make CC="cc -DDEBUG"'. 576DEBUG_1284 opt_ppb_1284.h 577LPT_DEBUG opt_lpt.h 578PLIP_DEBUG opt_plip.h 579LOCKF_DEBUG opt_debug_lockf.h 580SI_DEBUG opt_debug_si.h 581IFMEDIA_DEBUG opt_ifmedia.h 582 583# Fb options 584FB_DEBUG opt_fb.h 585 586# ppbus related options 587PERIPH_1284 opt_ppb_1284.h 588DONTPROBE_1284 opt_ppb_1284.h 589 590# smbus related options 591ENABLE_ALART opt_intpm.h 592 593# These cause changes all over the kernel 594BLKDEV_IOSIZE opt_global.h 595BURN_BRIDGES opt_global.h 596DEBUG opt_global.h 597DEBUG_LOCKS opt_global.h 598DEBUG_VFS_LOCKS opt_global.h 599DFLTPHYS opt_global.h 600DIAGNOSTIC opt_global.h 601INVARIANT_SUPPORT opt_global.h 602INVARIANTS opt_global.h 603KASSERT_PANIC_OPTIONAL opt_global.h 604MAXCPU opt_global.h 605MAXMEMDOM opt_global.h 606MAXPHYS opt_maxphys.h 607MCLSHIFT opt_global.h 608MUTEX_NOINLINE opt_global.h 609LOCK_PROFILING opt_global.h 610MSIZE opt_global.h 611REGRESSION opt_global.h 612RWLOCK_NOINLINE opt_global.h 613SX_NOINLINE opt_global.h 614VFS_BIO_DEBUG opt_global.h 615 616# These are VM related options 617VM_KMEM_SIZE opt_vm.h 618VM_KMEM_SIZE_SCALE opt_vm.h 619VM_KMEM_SIZE_MAX opt_vm.h 620VM_NRESERVLEVEL opt_vm.h 621VM_LEVEL_0_ORDER opt_vm.h 622NO_SWAPPING opt_vm.h 623MALLOC_MAKE_FAILURES opt_vm.h 624MALLOC_PROFILE opt_vm.h 625MALLOC_DEBUG_MAXZONES opt_vm.h 626 627# The MemGuard replacement allocator used for tamper-after-free detection 628DEBUG_MEMGUARD opt_vm.h 629 630# The RedZone malloc(9) protection 631DEBUG_REDZONE opt_vm.h 632 633# Standard SMP options 634EARLY_AP_STARTUP opt_global.h 635SMP opt_global.h 636NUMA opt_global.h 637 638# Size of the kernel message buffer 639MSGBUF_SIZE opt_msgbuf.h 640 641# NFS options 642NFS_MINATTRTIMO opt_nfs.h 643NFS_MAXATTRTIMO opt_nfs.h 644NFS_MINDIRATTRTIMO opt_nfs.h 645NFS_MAXDIRATTRTIMO opt_nfs.h 646NFS_DEBUG opt_nfs.h 647 648# TMPFS options 649TMPFS_PAGES_MINRESERVED opt_tmpfs.h 650 651# Options for uart(4) 652UART_PPS_ON_CTS opt_uart.h 653UART_POLL_FREQ opt_uart.h 654UART_DEV_TOLERANCE_PCT opt_uart.h 655 656# options for bus/device framework 657BUS_DEBUG opt_bus.h 658 659# options for USB support 660USB_DEBUG opt_usb.h 661USB_HOST_ALIGN opt_usb.h 662USB_REQ_DEBUG opt_usb.h 663USB_TEMPLATE opt_usb.h 664USB_VERBOSE opt_usb.h 665USB_DMA_SINGLE_ALLOC opt_usb.h 666USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 667U3G_DEBUG opt_u3g.h 668UKBD_DFLT_KEYMAP opt_ukbd.h 669UPLCOM_INTR_INTERVAL opt_uplcom.h 670UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 671UVSCOM_INTR_INTERVAL opt_uvscom.h 672 673# options for the Realtek rtwn driver 674RTWN_DEBUG opt_rtwn.h 675RTWN_WITHOUT_UCODE opt_rtwn.h 676 677# Embedded system options 678INIT_PATH 679 680ROOTDEVNAME 681 682FDC_DEBUG opt_fdc.h 683PCFCLOCK_VERBOSE opt_pcfclock.h 684PCFCLOCK_MAX_RETRIES opt_pcfclock.h 685 686KTR opt_global.h 687KTR_ALQ opt_ktr.h 688KTR_MASK opt_ktr.h 689KTR_CPUMASK opt_ktr.h 690KTR_COMPILE opt_global.h 691KTR_BOOT_ENTRIES opt_global.h 692KTR_ENTRIES opt_global.h 693KTR_VERBOSE opt_ktr.h 694WITNESS opt_global.h 695WITNESS_KDB opt_witness.h 696WITNESS_NO_VNODE opt_witness.h 697WITNESS_SKIPSPIN opt_witness.h 698WITNESS_COUNT opt_witness.h 699OPENSOLARIS_WITNESS opt_global.h 700 701EPOCH_TRACE opt_global.h 702 703# options for ACPI support 704ACPI_DEBUG opt_acpi.h 705ACPI_MAX_TASKS opt_acpi.h 706ACPI_MAX_THREADS opt_acpi.h 707DEV_ACPI opt_acpi.h 708ACPI_EARLY_EPYC_WAR opt_acpi.h 709 710# options for IOMMU support 711IOMMU opt_iommu.h 712 713# ISA support 714DEV_ISA opt_isa.h 715ISAPNP opt_dontuse.h 716 717# various 'device presence' options. 718DEV_BPF opt_bpf.h 719DEV_CARP opt_carp.h 720DEV_NETMAP opt_global.h 721DEV_PCI opt_pci.h 722DEV_PF opt_pf.h 723DEV_PFLOG opt_pf.h 724DEV_PFSYNC opt_pf.h 725DEV_SPLASH opt_splash.h 726DEV_VLAN opt_vlan.h 727 728# bce driver 729BCE_DEBUG opt_bce.h 730BCE_NVRAM_WRITE_SUPPORT opt_bce.h 731 732SOCKBUF_DEBUG opt_global.h 733 734 735# options for hifn driver 736HIFN_DEBUG opt_hifn.h 737HIFN_RNDTEST opt_hifn.h 738 739# options for safenet driver 740SAFE_DEBUG opt_safe.h 741SAFE_NO_RNG opt_safe.h 742SAFE_RNDTEST opt_safe.h 743 744# syscons/vt options 745MAXCONS opt_syscons.h 746SC_ALT_MOUSE_IMAGE opt_syscons.h 747SC_CUT_SPACES2TABS opt_syscons.h 748SC_CUT_SEPCHARS opt_syscons.h 749SC_DEBUG_LEVEL opt_syscons.h 750SC_DFLT_FONT opt_syscons.h 751SC_DFLT_TERM opt_syscons.h 752SC_DISABLE_KDBKEY opt_syscons.h 753SC_DISABLE_REBOOT opt_syscons.h 754SC_HISTORY_SIZE opt_syscons.h 755SC_KERNEL_CONS_ATTR opt_syscons.h 756SC_KERNEL_CONS_ATTRS opt_syscons.h 757SC_KERNEL_CONS_REV_ATTR opt_syscons.h 758SC_MOUSE_CHAR opt_syscons.h 759SC_NO_CUTPASTE opt_syscons.h 760SC_NO_FONT_LOADING opt_syscons.h 761SC_NO_HISTORY opt_syscons.h 762SC_NO_MODE_CHANGE opt_syscons.h 763SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 764SC_NO_SYSMOUSE opt_syscons.h 765SC_NO_TERM_DUMB opt_syscons.h 766SC_NO_TERM_SC opt_syscons.h 767SC_NO_TERM_TEKEN opt_syscons.h 768SC_NORM_ATTR opt_syscons.h 769SC_NORM_REV_ATTR opt_syscons.h 770SC_PIXEL_MODE opt_syscons.h 771SC_RENDER_DEBUG opt_syscons.h 772SC_TWOBUTTON_MOUSE opt_syscons.h 773VT_ALT_TO_ESC_HACK opt_syscons.h 774VT_FB_MAX_WIDTH opt_syscons.h 775VT_FB_MAX_HEIGHT opt_syscons.h 776VT_MAXWINDOWS opt_syscons.h 777VT_TWOBUTTON_MOUSE opt_syscons.h 778DEV_SC opt_syscons.h 779DEV_VT opt_syscons.h 780 781# teken terminal emulator options 782TEKEN_CONS25 opt_teken.h 783TEKEN_UTF8 opt_teken.h 784TERMINAL_KERN_ATTR opt_teken.h 785TERMINAL_NORM_ATTR opt_teken.h 786 787# options for printf 788PRINTF_BUFR_SIZE opt_printf.h 789BOOT_TAG opt_printf.h 790BOOT_TAG_SZ opt_printf.h 791 792# kbd options 793KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 794KBD_INSTALL_CDEV opt_kbd.h 795KBD_MAXRETRY opt_kbd.h 796KBD_MAXWAIT opt_kbd.h 797KBD_RESETDELAY opt_kbd.h 798KBD_DELAY1 opt_kbd.h 799KBD_DELAY2 opt_kbd.h 800KBDIO_DEBUG opt_kbd.h 801KBDMUX_DFLT_KEYMAP opt_kbdmux.h 802 803# options for the Atheros driver 804ATH_DEBUG opt_ath.h 805ATH_TXBUF opt_ath.h 806ATH_RXBUF opt_ath.h 807ATH_DIAGAPI opt_ath.h 808ATH_TX99_DIAG opt_ath.h 809ATH_ENABLE_11N opt_ath.h 810ATH_ENABLE_DFS opt_ath.h 811ATH_EEPROM_FIRMWARE opt_ath.h 812ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 813ATH_DEBUG_ALQ opt_ath.h 814ATH_KTR_INTR_DEBUG opt_ath.h 815 816# options for the Atheros hal 817# XXX For now, this breaks non-AR9130 chipsets, so only use it 818# XXX when actually targeting AR9130. 819AH_SUPPORT_AR9130 opt_ah.h 820 821# This is required for AR933x SoC support 822AH_SUPPORT_AR9330 opt_ah.h 823AH_SUPPORT_AR9340 opt_ah.h 824AH_SUPPORT_QCA9530 opt_ah.h 825AH_SUPPORT_QCA9550 opt_ah.h 826 827AH_DEBUG opt_ah.h 828AH_ASSERT opt_ah.h 829AH_DEBUG_ALQ opt_ah.h 830AH_REGOPS_FUNC opt_ah.h 831AH_WRITE_REGDOMAIN opt_ah.h 832AH_DEBUG_COUNTRY opt_ah.h 833AH_WRITE_EEPROM opt_ah.h 834AH_PRIVATE_DIAG opt_ah.h 835AH_NEED_DESC_SWAP opt_ah.h 836AH_USE_INIPDGAIN opt_ah.h 837AH_MAXCHAN opt_ah.h 838AH_RXCFG_SDMAMW_4BYTES opt_ah.h 839AH_INTERRUPT_DEBUGGING opt_ah.h 840# AR5416 and later interrupt mitigation 841# XXX do not use this for AR9130 842AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 843 844# options for the Altera mSGDMA driver (altera_msgdma) 845ALTERA_MSGDMA_DESC_STD opt_altera_msgdma.h 846ALTERA_MSGDMA_DESC_EXT opt_altera_msgdma.h 847ALTERA_MSGDMA_DESC_PF_STD opt_altera_msgdma.h 848ALTERA_MSGDMA_DESC_PF_EXT opt_altera_msgdma.h 849 850# options for the Broadcom BCM43xx driver (bwi) 851BWI_DEBUG opt_bwi.h 852BWI_DEBUG_VERBOSE opt_bwi.h 853 854# options for the Brodacom BCM43xx driver (bwn) 855BWN_DEBUG opt_bwn.h 856BWN_GPL_PHY opt_bwn.h 857BWN_USE_SIBA opt_bwn.h 858 859# Options for the SIBA driver 860SIBA_DEBUG opt_siba.h 861 862# options for the Marvell 8335 wireless driver 863MALO_DEBUG opt_malo.h 864MALO_TXBUF opt_malo.h 865MALO_RXBUF opt_malo.h 866 867# options for the Marvell wireless driver 868MWL_DEBUG opt_mwl.h 869MWL_TXBUF opt_mwl.h 870MWL_RXBUF opt_mwl.h 871MWL_DIAGAPI opt_mwl.h 872MWL_AGGR_SIZE opt_mwl.h 873MWL_TX_NODROP opt_mwl.h 874 875# Options for the Marvell NETA driver 876MVNETA_MULTIQUEUE opt_mvneta.h 877MVNETA_KTR opt_mvneta.h 878 879# Options for the Intel 802.11ac wireless driver 880IWM_DEBUG opt_iwm.h 881 882# Options for the Intel 802.11n wireless driver 883IWN_DEBUG opt_iwn.h 884 885# Options for the Intel 3945ABG wireless driver 886WPI_DEBUG opt_wpi.h 887 888# dcons options 889DCONS_BUF_SIZE opt_dcons.h 890DCONS_POLL_HZ opt_dcons.h 891DCONS_FORCE_CONSOLE opt_dcons.h 892DCONS_FORCE_GDB opt_dcons.h 893 894# HWPMC options 895HWPMC_DEBUG opt_global.h 896HWPMC_HOOKS 897HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h 898 899# 802.11 support layer 900IEEE80211_DEBUG opt_wlan.h 901IEEE80211_DEBUG_REFCNT opt_wlan.h 902IEEE80211_SUPPORT_MESH opt_wlan.h 903IEEE80211_SUPPORT_SUPERG opt_wlan.h 904IEEE80211_SUPPORT_TDMA opt_wlan.h 905IEEE80211_ALQ opt_wlan.h 906IEEE80211_DFS_DEBUG opt_wlan.h 907 908# 802.11 TDMA support 909TDMA_SLOTLEN_DEFAULT opt_tdma.h 910TDMA_SLOTCNT_DEFAULT opt_tdma.h 911TDMA_BINTVAL_DEFAULT opt_tdma.h 912TDMA_TXRATE_11B_DEFAULT opt_tdma.h 913TDMA_TXRATE_11G_DEFAULT opt_tdma.h 914TDMA_TXRATE_11A_DEFAULT opt_tdma.h 915TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 916TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 917TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 918TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 919TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 920 921# VideoMode 922PICKMODE_DEBUG opt_videomode.h 923 924# Network stack virtualization options 925VIMAGE opt_global.h 926VNET_DEBUG opt_global.h 927 928# Common Flash Interface (CFI) options 929CFI_SUPPORT_STRATAFLASH opt_cfi.h 930CFI_ARMEDANDDANGEROUS opt_cfi.h 931CFI_HARDWAREBYTESWAP opt_cfi.h 932 933# Sound options 934SND_DEBUG opt_snd.h 935SND_DIAGNOSTIC opt_snd.h 936SND_FEEDER_MULTIFORMAT opt_snd.h 937SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 938SND_FEEDER_RATE_HP opt_snd.h 939SND_PCM_64 opt_snd.h 940SND_OLDSTEREO opt_snd.h 941 942X86BIOS 943 944# Flattened device tree options 945FDT opt_platform.h 946FDT_DTB_STATIC opt_platform.h 947 948# OFED Infiniband stack 949OFED opt_ofed.h 950OFED_DEBUG_INIT opt_ofed.h 951SDP opt_ofed.h 952SDP_DEBUG opt_ofed.h 953IPOIB opt_ofed.h 954IPOIB_DEBUG opt_ofed.h 955IPOIB_CM opt_ofed.h 956 957# Resource Accounting 958RACCT opt_global.h 959RACCT_DEFAULT_TO_DISABLED opt_global.h 960 961# Resource Limits 962RCTL opt_global.h 963 964# Random number generator(s) 965# Alternative RNG algorithm. 966RANDOM_FENESTRASX opt_global.h 967# With this, no entropy processor is loaded, but the entropy 968# harvesting infrastructure is present. This means an entropy 969# processor may be loaded as a module. 970RANDOM_LOADABLE opt_global.h 971# This turns on high-rate and potentially expensive harvesting in 972# the uma slab allocator. 973RANDOM_ENABLE_UMA opt_global.h 974RANDOM_ENABLE_ETHER opt_global.h 975 976# This options turns TPM into entropy source. 977TPM_HARVEST opt_tpm.h 978 979# BHND(4) driver 980BHND_LOGLEVEL opt_global.h 981 982# GPIO and child devices 983GPIO_SPI_DEBUG opt_gpio.h 984 985# SPI devices 986SPIGEN_LEGACY_CDEVNAME opt_spi.h 987 988# etherswitch(4) driver 989RTL8366_SOFT_RESET opt_etherswitch.h 990 991# evdev protocol support 992EVDEV_SUPPORT opt_evdev.h 993EVDEV_DEBUG opt_evdev.h 994UINPUT_DEBUG opt_evdev.h 995 996# Hyper-V network driver 997HN_DEBUG opt_hn.h 998 999# CAM-based MMC stack 1000MMCCAM 1001# Encrypted kernel crash dumps 1002EKCD opt_ekcd.h 1003 1004# NVME options 1005NVME_USE_NVD opt_nvme.h 1006NVME_2X_RESET opt_nvme.h 1007 1008# amdsbwd options 1009AMDSBWD_DEBUG opt_amdsbwd.h 1010 1011# gcov support 1012GCOV opt_global.h 1013LINDEBUGFS 1014 1015# options for HID support 1016HID_DEBUG opt_hid.h 1017IICHID_DEBUG opt_hid.h 1018IICHID_SAMPLING opt_hid.h 1019HKBD_DFLT_KEYMAP opt_hkbd.h 1020HIDRAW_MAKE_UHID_ALIAS opt_hid.h 1021 1022# kenv options 1023# The early kernel environment (loader environment, config(8)-provided static) 1024# is typically cleared after the dynamic environment comes up to ensure that 1025# we're not inadvertently holding on to 'secret' values in these stale envs. 1026# This option is insecure except in controlled environments where the static 1027# environment's contents are known to be safe. 1028PRESERVE_EARLY_KENV opt_global.h 1029