1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affect only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33# Adaptec Array Controller driver options 34AAC_DEBUG opt_aac.h # Debugging levels: 35 # 0 - quiet, only emit warnings 36 # 1 - noisy, emit major function 37 # points and things done 38 # 2 - extremely noisy, emit trace 39 # items in loops, etc. 40 41# Adaptec aic7xxx SCSI controller options 42AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory 43 # mapped I/O 44 45AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable 46 # targetmode operations. 47 48AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our 49 # configuration prom. 50 51AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code. 52 53AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options. 54 # See sys/dev/aic7xxx/aic7xxx.h 55 56AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug 57 # output. Adds ~128k to driver. 58 59# Adaptec aic79xx SCSI controller options 60AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code. 61 62AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options. 63 # See sys/dev/aic7xxx/aic79xx.h 64 65AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable 66 # targetmode operations. 67 68AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug 69 # output. Adds ~215k to driver. 70 71ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 72 # mapped I/O 73 74# Miscellaneous options. 75ADAPTIVE_MUTEXES 76ALQ 77CODA_COMPAT_5 opt_coda.h 78COMPAT_43 opt_compat.h 79COMPAT_FREEBSD4 opt_compat.h 80COMPAT_SUNOS opt_compat.h 81COMPILING_LINT opt_global.h 82CONSPEED opt_comconsole.h 83CY_PCI_FASTINTR 84DDB 85DDB_NOKLDSYM opt_ddb.h 86DDB_TRACE 87DDB_UNATTENDED 88GDB_REMOTE_CHAT opt_ddb.h 89GDBSPEED opt_ddb.h 90GEOM_AES opt_geom.h 91GEOM_APPLE opt_geom.h 92GEOM_BDE opt_geom.h 93GEOM_BSD opt_geom.h 94GEOM_FOX opt_geom.h 95GEOM_GPT opt_geom.h 96GEOM_MBR opt_geom.h 97GEOM_MIRROR opt_geom.h 98GEOM_PC98 opt_geom.h 99GEOM_SUNLABEL opt_geom.h 100GEOM_VOL opt_geom.h 101HW_WDOG 102KSTACK_PAGES 103KSTACK_MAX_PAGES 104KTRACE 105KTRACE_REQUEST_POOL opt_ktrace.h 106LIBICONV 107MAC 108MAC_ALWAYS_LABEL_MBUF opt_mac.h 109MAC_BIBA opt_dontuse.h 110MAC_BSDEXTENDED opt_dontuse.h 111MAC_DEBUG opt_mac.h 112MAC_IFOFF opt_dontuse.h 113MAC_LOMAC opt_dontuse.h 114MAC_MLS opt_dontuse.h 115MAC_NONE opt_dontuse.h 116MAC_PARTITION opt_dontuse.h 117MAC_PORTACL opt_dontuse.h 118MAC_SEEOTHERUIDS opt_dontuse.h 119MAC_STUB opt_dontuse.h 120MAC_TEST opt_dontuse.h 121MD_ROOT opt_md.h 122MD_ROOT_SIZE opt_md.h 123NDGBPORTS opt_dgb.h 124NSWBUF_MIN opt_swap.h 125PANIC_REBOOT_WAIT_TIME opt_panic.h 126PPS_SYNC opt_ntp.h 127PUC_FASTINTR opt_puc.h 128QUOTA 129SCHED_4BSD opt_sched.h 130SCHED_ULE opt_sched.h 131SHOW_BUSYBUFS 132SPX_HACK 133SUIDDIR opt_suiddir.h 134MSGMNB opt_sysvipc.h 135MSGMNI opt_sysvipc.h 136MSGSEG opt_sysvipc.h 137MSGSSZ opt_sysvipc.h 138MSGTQL opt_sysvipc.h 139SEMMAP opt_sysvipc.h 140SEMMNI opt_sysvipc.h 141SEMMNS opt_sysvipc.h 142SEMMNU opt_sysvipc.h 143SEMMSL opt_sysvipc.h 144SEMOPM opt_sysvipc.h 145SEMUME opt_sysvipc.h 146SHMALL opt_sysvipc.h 147SHMMAX opt_sysvipc.h 148SHMMAXPGS opt_sysvipc.h 149SHMMIN opt_sysvipc.h 150SHMMNI opt_sysvipc.h 151SHMSEG opt_sysvipc.h 152SYSVMSG opt_sysvipc.h 153SYSVSEM opt_sysvipc.h 154SYSVSHM opt_sysvipc.h 155VFS_AIO 156WLCACHE opt_wavelan.h 157WLDEBUG opt_wavelan.h 158TTYHOG opt_tty.h 159DIRECTIO opt_directio.h 160 161# POSIX kernel options 162_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 163P1003_1B_SEMAPHORES opt_posix.h 164 165# Do we want the config file compiled into the kernel? 166INCLUDE_CONFIG_FILE opt_config.h 167 168# Options for static filesystems. These should only be used at config 169# time, since the corresponding lkms cannot work if there are any static 170# dependencies. Unusability is enforced by hiding the defines for the 171# options in a never-included header. 172CD9660 opt_dontuse.h 173CODA opt_dontuse.h 174EXT2FS opt_dontuse.h 175FDESCFS opt_dontuse.h 176HPFS opt_dontuse.h 177LINPROCFS opt_dontuse.h 178MSDOSFS opt_dontuse.h 179NTFS opt_dontuse.h 180NULLFS opt_dontuse.h 181NWFS opt_dontuse.h 182PORTALFS opt_dontuse.h 183PROCFS opt_dontuse.h 184PSEUDOFS opt_dontuse.h 185SMBFS opt_dontuse.h 186UDF opt_dontuse.h 187UMAPFS opt_dontuse.h 188UNIONFS opt_dontuse.h 189 190# Broken - ffs_snapshot() dependency from ufs_lookup() :-( 191FFS opt_ffs_broken_fixme.h 192 193# These static filesystems have one slightly bogus static dependency in 194# sys/i386/i386/autoconf.c. If any of these filesystems are 195# statically compiled into the kernel, code for mounting them as root 196# filesystems will be enabled - but look below. 197NFSCLIENT opt_nfs.h 198NFSSERVER opt_nfs.h 199 200# filesystems and libiconv bridge 201CD9660_ICONV opt_dontuse.h 202MSDOSFS_ICONV opt_dontuse.h 203NTFS_ICONV opt_dontuse.h 204UDF_ICONV opt_dontuse.h 205 206# If you are following the conditions in the copyright, 207# you can enable soft-updates which will speed up a lot of thigs 208# and make the system safer from crashes at the same time. 209# otherwise a STUB module will be compiled in. 210SOFTUPDATES opt_ffs.h 211 212# Enabling this option turns on support for Access Control Lists in UFS, 213# which can be used to support high security configurations. Depends on 214# UFS_EXTATTR. 215UFS_ACL opt_ufs.h 216 217# Enabling this option turns on support for extended attributes in UFS-based 218# filesystems, which can be used to support high security configurations 219# as well as new filesystem features. 220UFS_EXTATTR opt_ufs.h 221UFS_EXTATTR_AUTOSTART opt_ufs.h 222 223# Enable fast hash lookups for large directories on UFS-based filesystems. 224UFS_DIRHASH opt_ufs.h 225 226# The below sentence is not in English, and neither is this one. 227# We plan to remove the static dependences above, with a 228# <filesystem>_ROOT option to control if it usable as root. This list 229# allows these options to be present in config files already (though 230# they won't make any difference yet). 231NFS_ROOT opt_nfsroot.h 232 233# SMB/CIFS requester 234NETSMB opt_netsmb.h 235NETSMBCRYPTO opt_netsmb.h 236 237# Options used only in subr_param.c. 238HZ opt_param.h 239MAXFILES opt_param.h 240NBUF opt_param.h 241NMBCLUSTERS opt_param.h 242NSFBUFS opt_param.h 243VM_BCACHE_SIZE_MAX opt_param.h 244VM_SWZONE_SIZE_MAX opt_param.h 245MAXUSERS 246DFLDSIZ opt_param.h 247MAXDSIZ opt_param.h 248MAXSSIZ opt_param.h 249 250# Generic SCSI options. 251CAM_MAX_HIGHPOWER opt_cam.h 252CAMDEBUG opt_cam.h 253CAM_DEBUG_DELAY opt_cam.h 254CAM_DEBUG_BUS opt_cam.h 255CAM_DEBUG_TARGET opt_cam.h 256CAM_DEBUG_LUN opt_cam.h 257CAM_DEBUG_FLAGS opt_cam.h 258CAM_NEW_TRAN_CODE opt_cam.h 259SCSI_DELAY opt_scsi.h 260SCSI_NO_SENSE_STRINGS opt_scsi.h 261SCSI_NO_OP_STRINGS opt_scsi.h 262 263# Options used only in cam/scsi/scsi_cd.c 264CHANGER_MIN_BUSY_SECONDS opt_cd.h 265CHANGER_MAX_BUSY_SECONDS opt_cd.h 266 267DA_OLD_QUIRKS opt_da.h 268 269# Options used only in cam/scsi/scsi_sa.c. 270SA_IO_TIMEOUT opt_sa.h 271SA_SPACE_TIMEOUT opt_sa.h 272SA_REWIND_TIMEOUT opt_sa.h 273SA_ERASE_TIMEOUT opt_sa.h 274SA_1FM_AT_EOD opt_sa.h 275 276# Options used only in cam/scsi/scsi_pt.c 277SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 278 279# Options used only in cam/scsi/scsi_ses.c 280SES_ENABLE_PASSTHROUGH opt_ses.h 281 282# Options used in dev/sym/ (Symbios SCSI driver). 283SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 284 # Allows the ncr to take precedence 285 # 1 (1<<0) -> 810a, 860 286 # 2 (1<<1) -> 825a, 875, 885, 895 287 # 4 (1<<2) -> 895a, 896, 1510d 288SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 289 # disabled:0 (default), enabled:1 290SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 291 # disabled:0, enabled:1 (default) 292SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 293 # default:8, range:[1..64] 294 295# Options used only in pci/ncr.c 296SCSI_NCR_DEBUG opt_ncr.h 297SCSI_NCR_MAX_SYNC opt_ncr.h 298SCSI_NCR_MAX_WIDE opt_ncr.h 299SCSI_NCR_MYADDR opt_ncr.h 300 301# Options used only in dev/isp/* 302ISP_TARGET_MODE opt_isp.h 303ISP_FW_CRASH_DUMP opt_isp.h 304 305# Options used in the 'ata' ATA/ATAPI driver 306ATA_STATIC_ID opt_ata.h 307ATA_NOPCI opt_ata.h 308DEV_ATADISK opt_ata.h 309DEV_ATARAID opt_ata.h 310DEV_ATAPICD opt_ata.h 311DEV_ATAPIST opt_ata.h 312DEV_ATAPIFD opt_ata.h 313DEV_ATAPICAM opt_ata.h 314 315# Net stuff. 316ACCEPT_FILTER_DATA 317ACCEPT_FILTER_HTTP 318BOOTP opt_bootp.h 319BOOTP_COMPAT opt_bootp.h 320BOOTP_NFSROOT opt_bootp.h 321BOOTP_NFSV3 opt_bootp.h 322BOOTP_WIRED_TO opt_bootp.h 323BRIDGE opt_bdg.h 324ETHER_II opt_ef.h 325ETHER_8023 opt_ef.h 326ETHER_8022 opt_ef.h 327ETHER_SNAP opt_ef.h 328MROUTING opt_mrouting.h 329PIM opt_mrouting.h 330INET opt_inet.h 331INET6 opt_inet6.h 332IPSEC opt_ipsec.h 333IPSEC_ESP opt_ipsec.h 334IPSEC_DEBUG opt_ipsec.h 335IPSEC_FILTERGIF opt_ipsec.h 336FAST_IPSEC opt_ipsec.h 337IPDIVERT 338DUMMYNET opt_ipdn.h 339IPFILTER opt_ipfilter.h 340IPFILTER_LOG opt_ipfilter.h 341IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 342PFIL_HOOKS opt_pfil_hooks.h 343IPFIREWALL opt_ipfw.h 344IPFIREWALL_VERBOSE opt_ipfw.h 345IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 346IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 347IPV6FIREWALL opt_ip6fw.h 348IPV6FIREWALL_VERBOSE opt_ip6fw.h 349IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 350IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 351IPSTEALTH 352IPX 353IPXIP opt_ipx.h 354LIBMBPOOL 355LIBMCHAIN 356NCP 357NETATALK opt_atalk.h 358PPP_BSDCOMP opt_ppp.h 359PPP_DEFLATE opt_ppp.h 360PPP_FILTER opt_ppp.h 361RANDOM_IP_ID 362SLIP_IFF_OPTS opt_slip.h 363TCPDEBUG 364TCP_DROP_SYNFIN opt_tcp_input.h 365XBONEHACK 366MBUF_STRESS_TEST opt_mbuf_stress_test.h 367 368# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 369# Each netgraph node type can be either be compiled into the kernel 370# or loaded dynamically. To get the former, include the corresponding 371# option below. Each type has its own man page, e.g. ng_async(4). 372NETGRAPH 373NETGRAPH_ASYNC opt_netgraph.h 374NETGRAPH_BPF opt_netgraph.h 375NETGRAPH_BRIDGE opt_netgraph.h 376NETGRAPH_CISCO opt_netgraph.h 377NETGRAPH_ECHO opt_netgraph.h 378NETGRAPH_ETHER opt_netgraph.h 379NETGRAPH_FRAME_RELAY opt_netgraph.h 380NETGRAPH_GIF opt_netgraph.h 381NETGRAPH_GIF_DEMUX opt_netgraph.h 382NETGRAPH_HOLE opt_netgraph.h 383NETGRAPH_IFACE opt_netgraph.h 384NETGRAPH_IP_INPUT opt_netgraph.h 385NETGRAPH_KSOCKET opt_netgraph.h 386NETGRAPH_L2TP opt_netgraph.h 387NETGRAPH_LMI opt_netgraph.h 388# MPPC compression requires proprietary files (not included) 389NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 390NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 391NETGRAPH_ONE2MANY opt_netgraph.h 392NETGRAPH_PPP opt_netgraph.h 393NETGRAPH_PPPOE opt_netgraph.h 394NETGRAPH_PPTPGRE opt_netgraph.h 395NETGRAPH_RFC1490 opt_netgraph.h 396NETGRAPH_SOCKET opt_netgraph.h 397NETGRAPH_SPLIT opt_netgraph.h 398NETGRAPH_TEE opt_netgraph.h 399NETGRAPH_TTY opt_netgraph.h 400NETGRAPH_UI opt_netgraph.h 401NETGRAPH_VJC opt_netgraph.h 402NETGRAPH_ATM_ATMPIF opt_netgraph.h 403 404# NgATM options 405NGATM_ATM opt_netgraph.h 406NGATM_ATMBASE opt_netgraph.h 407NGATM_SSCOP opt_netgraph.h 408NGATM_SSCFU opt_netgraph.h 409NGATM_UNI opt_netgraph.h 410 411# DRM options 412DRM_DEBUG opt_drm.h 413 414ZERO_COPY_SOCKETS opt_zero.h 415TI_PRIVATE_JUMBOS opt_ti.h 416TI_JUMBO_HDRSPLIT opt_ti.h 417 418# ATM (HARP version) 419ATM_CORE opt_atm.h 420ATM_IP opt_atm.h 421ATM_SIGPVC opt_atm.h 422ATM_SPANS opt_atm.h 423ATM_UNI opt_atm.h 424 425# XXX Conflict: # of devices vs network protocol (Native ATM). 426# This makes "atm.h" unusable. 427NATM 428 429# DPT driver debug flags 430DPT_MEASURE_PERFORMANCE opt_dpt.h 431DPT_HANDLE_TIMEOUTS opt_dpt.h 432DPT_TIMEOUT_FACTOR opt_dpt.h 433DPT_LOST_IRQ opt_dpt.h 434DPT_RESET_HBA opt_dpt.h 435 436# Adaptec ASR and DPT V/VI controller options 437ASR_MEASURE_PERFORMANCE opt_asr.h 438 439# Misc debug flags. Most of these should probably be replaced with 440# 'DEBUG', and then let people recompile just the interesting modules 441# with 'make CC="cc -DDEBUG"'. 442CLUSTERDEBUG opt_debug_cluster.h 443DEBUG_1284 opt_ppb_1284.h 444VP0_DEBUG opt_vpo.h 445LPT_DEBUG opt_lpt.h 446PLIP_DEBUG opt_plip.h 447LOCKF_DEBUG opt_debug_lockf.h 448MUTEX_DEBUG opt_global.h 449MUTEX_NOINLINE opt_global.h 450MUTEX_PROFILING opt_global.h 451NPX_DEBUG opt_debug_npx.h 452NETATALKDEBUG opt_atalk.h 453SI_DEBUG opt_debug_si.h 454WATCHDOG opt_watchdog.h 455 456# Fb options 457FB_DEBUG opt_fb.h 458FB_INSTALL_CDEV opt_fb.h 459 460# ppbus related options 461PERIPH_1284 opt_ppb_1284.h 462DONTPROBE_1284 opt_ppb_1284.h 463 464# smbus related options 465ENABLE_ALART opt_intpm.h 466 467# These cause changes all over the kernel 468BLKDEV_IOSIZE opt_global.h 469BURN_BRIDGES opt_global.h 470DEBUG opt_global.h 471DEBUG_LOCKS opt_global.h 472DEBUG_VFS_LOCKS opt_global.h 473DIAGNOSTIC opt_global.h 474INVARIANT_SUPPORT opt_global.h 475INVARIANTS opt_global.h 476LOOKUP_SHARED opt_global.h 477MCLSHIFT opt_global.h 478MSIZE opt_global.h 479REGRESSION opt_global.h 480RESTARTABLE_PANICS opt_global.h 481VFS_BIO_DEBUG opt_global.h 482 483# These are VM related options 484VM_KMEM_SIZE opt_vm.h 485VM_KMEM_SIZE_SCALE opt_vm.h 486VM_KMEM_SIZE_MAX opt_vm.h 487NO_SWAPPING opt_vm.h 488MALLOC_MAKE_FAILURES opt_vm.h 489MALLOC_PROFILE opt_vm.h 490PQ_NOOPT opt_vmpage.h 491PQ_NORMALCACHE opt_vmpage.h 492PQ_MEDIUMCACHE opt_vmpage.h 493PQ_LARGECACHE opt_vmpage.h 494PQ_HUGECACHE opt_vmpage.h 495PQ_CACHESIZE opt_vmpage.h 496 497# Standard SMP options 498SMP opt_global.h 499 500# Size of the kernel message buffer 501MSGBUF_SIZE opt_msgbuf.h 502 503# NFS options 504NFS_MINATTRTIMO opt_nfs.h 505NFS_MAXATTRTIMO opt_nfs.h 506NFS_MINDIRATTRTIMO opt_nfs.h 507NFS_MAXDIRATTRTIMO opt_nfs.h 508NFS_GATHERDELAY opt_nfs.h 509NFS_WDELAYHASHSIZ opt_nfs.h 510NFS_DEBUG opt_nfs.h 511 512# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 513OVERRIDE_CARD opt_bktr.h 514OVERRIDE_TUNER opt_bktr.h 515OVERRIDE_DBX opt_bktr.h 516OVERRIDE_MSP opt_bktr.h 517BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 518BROOKTREE_ALLOC_PAGES opt_bktr.h 519BKTR_OVERRIDE_CARD opt_bktr.h 520BKTR_OVERRIDE_TUNER opt_bktr.h 521BKTR_OVERRIDE_DBX opt_bktr.h 522BKTR_OVERRIDE_MSP opt_bktr.h 523BKTR_SYSTEM_DEFAULT opt_bktr.h 524BKTR_ALLOC_PAGES opt_bktr.h 525BKTR_USE_PLL opt_bktr.h 526BKTR_GPIO_ACCESS opt_bktr.h 527BKTR_NO_MSP_RESET opt_bktr.h 528BKTR_430_FX_MODE opt_bktr.h 529BKTR_SIS_VIA_MODE opt_bktr.h 530BKTR_USE_FREEBSD_SMBUS opt_bktr.h 531BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 532 533# meteor opt_meteor.h 534METEOR_ALLOC_PAGES opt_meteor.h 535METEOR_TEST_VIDEO opt_meteor.h 536METEOR_SYSTEM_DEFAULT opt_meteor.h 537METEOR_DEALLOC_PAGES opt_meteor.h 538METEOR_DEALLOC_ABOVE opt_meteor.h 539 540# options for serial support 541COM_ESP opt_sio.h 542COM_MULTIPORT opt_sio.h 543BREAK_TO_DEBUGGER opt_comconsole.h 544ALT_BREAK_TO_DEBUGGER opt_comconsole.h 545 546# Options to support PPS 547UART_PPS_ON_CTS opt_uart.h 548 549# options for bus/device framework 550BUS_DEBUG opt_bus.h 551 552# options for USB support 553USB_DEBUG opt_usb.h 554UKBD_DFLT_KEYMAP opt_ukbd.h 555UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 556 557# Vinum options 558VINUMDEBUG opt_vinum.h 559 560# Embedded system options 561INIT_PATH opt_init_path.h 562 563ROOTDEVNAME opt_rootdevname.h 564 565FDC_DEBUG opt_fdc.h 566PCFCLOCK_VERBOSE opt_pcfclock.h 567PCFCLOCK_MAX_RETRIES opt_pcfclock.h 568TDFX_LINUX opt_tdfx.h 569 570# RAIDframe options 571RAID_AUTOCONFIG opt_raid.h 572RAID_DEBUG opt_raid.h 573 574KTR opt_global.h 575KTR_ALQ opt_ktr.h 576KTR_MASK opt_ktr.h 577KTR_CPUMASK opt_ktr.h 578KTR_COMPILE opt_global.h 579KTR_ENTRIES opt_global.h 580KTR_VERBOSE opt_ktr.h 581WITNESS opt_global.h 582WITNESS_DDB opt_witness.h 583WITNESS_SKIPSPIN opt_witness.h 584 585# options for ACPI support 586ACPI_DEBUG opt_acpi.h 587ACPI_MAX_THREADS opt_acpi.h 588ACPI_NO_SEMAPHORES opt_acpi.h 589ACPICA_PEDANTIC opt_acpi.h 590 591# options for DEVFS, see sys/fs/devfs/devfs.h 592NDEVFSINO opt_devfs.h 593NDEVFSOVERFLOW opt_devfs.h 594 595# various 'device presence' options. 596DEV_ISA opt_isa.h 597DEV_MCA opt_mca.h 598DEV_BPF opt_bpf.h 599DEV_SPLASH opt_splash.h 600 601EISA_SLOTS opt_eisa.h 602 603# ed driver 604ED_NO_MIIBUS opt_ed.h 605 606# wi driver 607WI_SYMBOL_FIRMWARE opt_wi.h 608 609# XXX bogusly global. 610DEVICE_POLLING opt_global.h 611 612SOCKBUF_DEBUG opt_global.h 613 614# options for ubsec driver 615UBSEC_DEBUG opt_ubsec.h 616UBSEC_RNDTEST opt_ubsec.h 617UBSEC_NO_RNG opt_ubsec.h 618 619# options for hifn driver 620HIFN_DEBUG opt_hifn.h 621HIFN_RNDTEST opt_hifn.h 622 623# options for safenet driver 624SAFE_DEBUG opt_safe.h 625SAFE_NO_RNG opt_safe.h 626SAFE_RNDTEST opt_safe.h 627 628# syscons options 629MAXCONS opt_syscons.h 630SC_ALT_MOUSE_IMAGE opt_syscons.h 631SC_CUT_SPACES2TABS opt_syscons.h 632SC_CUT_SEPCHARS opt_syscons.h 633SC_DEBUG_LEVEL opt_syscons.h 634SC_DFLT_FONT opt_syscons.h 635SC_DISABLE_DDBKEY opt_syscons.h 636SC_DISABLE_REBOOT opt_syscons.h 637SC_HISTORY_SIZE opt_syscons.h 638SC_KERNEL_CONS_ATTR opt_syscons.h 639SC_KERNEL_CONS_REV_ATTR opt_syscons.h 640SC_MOUSE_CHAR opt_syscons.h 641SC_NO_CUTPASTE opt_syscons.h 642SC_NO_FONT_LOADING opt_syscons.h 643SC_NO_HISTORY opt_syscons.h 644SC_NO_SYSMOUSE opt_syscons.h 645SC_NORM_ATTR opt_syscons.h 646SC_NORM_REV_ATTR opt_syscons.h 647SC_PIXEL_MODE opt_syscons.h 648SC_RENDER_DEBUG opt_syscons.h 649SC_TWOBUTTON_MOUSE opt_syscons.h 650SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 651 652# kbd options 653KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 654KBD_INSTALL_CDEV opt_kbd.h 655KBD_MAXRETRY opt_kbd.h 656KBD_MAXWAIT opt_kbd.h 657KBD_RESETDELAY opt_kbd.h 658KBDIO_DEBUG opt_kbd.h 659 660# options for the Atheros HAL (only useful with source code) 661AH_SUPPORT_AR5210 opt_ah.h 662AH_SUPPORT_AR5211 opt_ah.h 663AH_SUPPORT_AR5212 opt_ah.h 664AH_DEBUG opt_ah.h 665AH_DEBUG_ALQ opt_ah.h 666AH_ASSERT opt_ah.h 667 668# dcons options 669DCONS_BUF_SIZE opt_dcons.h 670DCONS_POLL_HZ opt_dcons.h 671DCONS_FORCE_CONSOLE opt_dcons.h 672DCONS_FORCE_GDB opt_dcons.h 673