1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affects only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AACRAID_DEBUG opt_aacraid.h 35AHC_ALLOW_MEMIO opt_aic7xxx.h 36AHC_TMODE_ENABLE opt_aic7xxx.h 37AHC_DUMP_EEPROM opt_aic7xxx.h 38AHC_DEBUG opt_aic7xxx.h 39AHC_DEBUG_OPTS opt_aic7xxx.h 40AHC_REG_PRETTY_PRINT opt_aic7xxx.h 41AHD_DEBUG opt_aic79xx.h 42AHD_DEBUG_OPTS opt_aic79xx.h 43AHD_TMODE_ENABLE opt_aic79xx.h 44AHD_REG_PRETTY_PRINT opt_aic79xx.h 45 46TWA_DEBUG opt_twa.h 47 48# Debugging options. 49ALT_BREAK_TO_DEBUGGER opt_kdb.h 50BREAK_TO_DEBUGGER opt_kdb.h 51BUF_TRACKING opt_global.h 52DDB 53DDB_BUFR_SIZE opt_ddb.h 54DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 55DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 56DDB_CTF opt_ddb.h 57DDB_NUMSYM opt_ddb.h 58EARLY_PRINTF opt_global.h 59FULL_BUF_TRACKING opt_global.h 60GDB 61KDB opt_global.h 62KDB_TRACE opt_kdb.h 63KDB_UNATTENDED opt_kdb.h 64KLD_DEBUG opt_kld.h 65NUM_CORE_FILES opt_global.h 66QUEUE_MACRO_DEBUG_TRACE opt_global.h 67QUEUE_MACRO_DEBUG_TRASH opt_global.h 68SYSCTL_DEBUG opt_sysctl.h 69TEXTDUMP_PREFERRED opt_ddb.h 70TEXTDUMP_VERBOSE opt_ddb.h 71TSLOG opt_global.h 72TSLOGSIZE opt_global.h 73 74# Miscellaneous options. 75ALQ 76ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h 77ATSE_CFI_HACK opt_cfi.h 78AUDIT opt_global.h 79BOOTHOWTO opt_global.h 80BOOTVERBOSE opt_global.h 81CALLOUT_PROFILING 82CAPABILITIES opt_capsicum.h 83CAPABILITY_MODE opt_capsicum.h 84COMPAT_43 opt_global.h 85COMPAT_43TTY opt_global.h 86COMPAT_FREEBSD4 opt_global.h 87COMPAT_FREEBSD5 opt_global.h 88COMPAT_FREEBSD6 opt_global.h 89COMPAT_FREEBSD7 opt_global.h 90COMPAT_FREEBSD9 opt_global.h 91COMPAT_FREEBSD10 opt_global.h 92COMPAT_FREEBSD11 opt_global.h 93COMPAT_FREEBSD12 opt_global.h 94COMPAT_CLOUDABI32 opt_dontuse.h 95COMPAT_CLOUDABI64 opt_dontuse.h 96COMPAT_LINUXKPI opt_dontuse.h 97_COMPAT_LINUX32 opt_compat.h # XXX: make sure opt_compat.h exists 98COMPILING_LINT opt_global.h 99CY_PCI_FASTINTR 100DEADLKRES opt_watchdog.h 101EXPERIMENTAL opt_global.h 102EXT_RESOURCES opt_global.h 103DIRECTIO 104FILEMON opt_dontuse.h 105FFCLOCK 106FULL_PREEMPTION opt_sched.h 107GZIO opt_gzio.h 108IMAGACT_BINMISC opt_dontuse.h 109IPI_PREEMPTION opt_sched.h 110GEOM_BDE opt_geom.h 111GEOM_CACHE opt_geom.h 112GEOM_CONCAT opt_geom.h 113GEOM_ELI opt_geom.h 114GEOM_GATE opt_geom.h 115GEOM_JOURNAL opt_geom.h 116GEOM_LABEL opt_geom.h 117GEOM_LABEL_GPT opt_geom.h 118GEOM_LINUX_LVM opt_geom.h 119GEOM_MAP opt_geom.h 120GEOM_MIRROR opt_geom.h 121GEOM_MOUNTVER opt_geom.h 122GEOM_MULTIPATH opt_geom.h 123GEOM_NOP opt_geom.h 124GEOM_PART_APM opt_geom.h 125GEOM_PART_BSD opt_geom.h 126GEOM_PART_BSD64 opt_geom.h 127GEOM_PART_EBR opt_geom.h 128GEOM_PART_GPT opt_geom.h 129GEOM_PART_LDM opt_geom.h 130GEOM_PART_MBR opt_geom.h 131GEOM_PART_VTOC8 opt_geom.h 132GEOM_RAID opt_geom.h 133GEOM_RAID3 opt_geom.h 134GEOM_SHSEC opt_geom.h 135GEOM_STRIPE opt_geom.h 136GEOM_UZIP opt_geom.h 137GEOM_UZIP_DEBUG opt_geom.h 138GEOM_VINUM opt_geom.h 139GEOM_VIRSTOR opt_geom.h 140GEOM_ZERO opt_geom.h 141IFLIB opt_iflib.h 142KDTRACE_HOOKS opt_global.h 143KDTRACE_FRAME opt_kdtrace.h 144KN_HASHSIZE opt_kqueue.h 145KSTACK_MAX_PAGES 146KSTACK_PAGES 147KSTACK_USAGE_PROF 148KTRACE 149KTRACE_REQUEST_POOL opt_ktrace.h 150LIBICONV 151MAC opt_global.h 152MAC_BIBA opt_dontuse.h 153MAC_BSDEXTENDED opt_dontuse.h 154MAC_IFOFF opt_dontuse.h 155MAC_LOMAC opt_dontuse.h 156MAC_MLS opt_dontuse.h 157MAC_NONE opt_dontuse.h 158MAC_NTPD opt_dontuse.h 159MAC_PARTITION opt_dontuse.h 160MAC_PORTACL opt_dontuse.h 161MAC_SEEOTHERUIDS opt_dontuse.h 162MAC_STATIC opt_mac.h 163MAC_STUB opt_dontuse.h 164MAC_TEST opt_dontuse.h 165MAC_VERIEXEC opt_dontuse.h 166MAC_VERIEXEC_SHA1 opt_dontuse.h 167MAC_VERIEXEC_SHA256 opt_dontuse.h 168MAC_VERIEXEC_SHA384 opt_dontuse.h 169MAC_VERIEXEC_SHA512 opt_dontuse.h 170MD_ROOT opt_md.h 171MD_ROOT_FSTYPE opt_md.h 172MD_ROOT_READONLY opt_md.h 173MD_ROOT_SIZE opt_md.h 174MD_ROOT_MEM opt_md.h 175MFI_DEBUG opt_mfi.h 176MFI_DECODE_LOG opt_mfi.h 177MPROF_BUFFERS opt_mprof.h 178MPROF_HASH_SIZE opt_mprof.h 179NEW_PCIB opt_global.h 180NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 181NO_ADAPTIVE_RWLOCKS 182NO_ADAPTIVE_SX 183NO_OBSOLETE_CODE opt_global.h 184NO_SYSCTL_DESCR opt_global.h 185NSWBUF_MIN opt_param.h 186MBUF_PACKET_ZONE_DISABLE opt_global.h 187PANIC_REBOOT_WAIT_TIME opt_panic.h 188PCI_HP opt_pci.h 189PCI_IOV opt_global.h 190PPC_DEBUG opt_ppc.h 191PPC_PROBE_CHIPSET opt_ppc.h 192PPS_SYNC opt_ntp.h 193PREEMPTION opt_sched.h 194QUOTA 195SCHED_4BSD opt_sched.h 196SCHED_STATS opt_sched.h 197SCHED_ULE opt_sched.h 198SLEEPQUEUE_PROFILING 199SLHCI_DEBUG opt_slhci.h 200STACK opt_stack.h 201SUIDDIR 202MSGMNB opt_sysvipc.h 203MSGMNI opt_sysvipc.h 204MSGSEG opt_sysvipc.h 205MSGSSZ opt_sysvipc.h 206MSGTQL opt_sysvipc.h 207SEMMNI opt_sysvipc.h 208SEMMNS opt_sysvipc.h 209SEMMNU opt_sysvipc.h 210SEMMSL opt_sysvipc.h 211SEMOPM opt_sysvipc.h 212SEMUME opt_sysvipc.h 213SHMALL opt_sysvipc.h 214SHMMAX opt_sysvipc.h 215SHMMAXPGS opt_sysvipc.h 216SHMMIN opt_sysvipc.h 217SHMMNI opt_sysvipc.h 218SHMSEG opt_sysvipc.h 219SYSVMSG opt_sysvipc.h 220SYSVSEM opt_sysvipc.h 221SYSVSHM opt_sysvipc.h 222SW_WATCHDOG opt_watchdog.h 223TCPHPTS opt_inet.h 224TURNSTILE_PROFILING 225UMTX_PROFILING 226UMTX_CHAINS opt_global.h 227VERBOSE_SYSINIT 228ZSTDIO opt_zstdio.h 229 230# Sanitizers 231COVERAGE opt_global.h 232KASAN opt_global.h 233KCOV 234KCSAN opt_global.h 235KUBSAN opt_global.h 236 237# POSIX kernel options 238P1003_1B_MQUEUE opt_posix.h 239P1003_1B_SEMAPHORES opt_posix.h 240_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 241 242# Do we want the config file compiled into the kernel? 243INCLUDE_CONFIG_FILE opt_config.h 244 245# Options for static filesystems. These should only be used at config 246# time, since the corresponding lkms cannot work if there are any static 247# dependencies. Unusability is enforced by hiding the defines for the 248# options in a never-included header. 249AUTOFS opt_dontuse.h 250CD9660 opt_dontuse.h 251EXT2FS opt_dontuse.h 252FDESCFS opt_dontuse.h 253FFS opt_dontuse.h 254FUSEFS opt_dontuse.h 255MSDOSFS opt_dontuse.h 256NULLFS opt_dontuse.h 257PROCFS opt_dontuse.h 258PSEUDOFS opt_dontuse.h 259SMBFS opt_dontuse.h 260TMPFS opt_dontuse.h 261UDF opt_dontuse.h 262UNIONFS opt_dontuse.h 263ZFS opt_dontuse.h 264 265# Pseudofs debugging 266PSEUDOFS_TRACE opt_pseudofs.h 267 268# In-kernel GSS-API 269KGSSAPI opt_kgssapi.h 270KGSSAPI_DEBUG opt_kgssapi.h 271 272# These static filesystems have one slightly bogus static dependency in 273# sys/i386/i386/autoconf.c. If any of these filesystems are 274# statically compiled into the kernel, code for mounting them as root 275# filesystems will be enabled - but look below. 276# NFSCL - client 277# NFSD - server 278NFSCL opt_nfs.h 279NFSD opt_nfs.h 280 281# filesystems and libiconv bridge 282CD9660_ICONV opt_dontuse.h 283MSDOSFS_ICONV opt_dontuse.h 284UDF_ICONV opt_dontuse.h 285 286# If you are following the conditions in the copyright, 287# you can enable soft-updates which will speed up a lot of thigs 288# and make the system safer from crashes at the same time. 289# otherwise a STUB module will be compiled in. 290SOFTUPDATES opt_ffs.h 291 292# On small, embedded systems, it can be useful to turn off support for 293# snapshots. It saves about 30-40k for a feature that would be lightly 294# used, if it is used at all. 295NO_FFS_SNAPSHOT opt_ffs.h 296 297# Enabling this option turns on support for Access Control Lists in UFS, 298# which can be used to support high security configurations. Depends on 299# UFS_EXTATTR. 300UFS_ACL opt_ufs.h 301 302# Enabling this option turns on support for extended attributes in UFS-based 303# filesystems, which can be used to support high security configurations 304# as well as new filesystem features. 305UFS_EXTATTR opt_ufs.h 306UFS_EXTATTR_AUTOSTART opt_ufs.h 307 308# Enable fast hash lookups for large directories on UFS-based filesystems. 309UFS_DIRHASH opt_ufs.h 310 311# Enable gjournal-based UFS journal. 312UFS_GJOURNAL opt_ufs.h 313 314# The below sentence is not in English, and neither is this one. 315# We plan to remove the static dependences above, with a 316# <filesystem>_ROOT option to control if it usable as root. This list 317# allows these options to be present in config files already (though 318# they won't make any difference yet). 319NFS_ROOT opt_nfsroot.h 320 321# SMB/CIFS requester 322NETSMB opt_netsmb.h 323 324# Enable debugnet(4) networking support. 325DEBUGNET opt_global.h 326# Enable netdump(4) client support. 327NETDUMP opt_global.h 328# Enable netgdb(4) support. 329NETGDB opt_global.h 330 331# Options used only in subr_param.c. 332HZ opt_param.h 333MAXFILES opt_param.h 334NBUF opt_param.h 335NSFBUFS opt_param.h 336VM_BCACHE_SIZE_MAX opt_param.h 337VM_SWZONE_SIZE_MAX opt_param.h 338MAXUSERS 339DFLDSIZ opt_param.h 340MAXDSIZ opt_param.h 341MAXSSIZ opt_param.h 342 343# Generic SCSI options. 344CAM_MAX_HIGHPOWER opt_cam.h 345CAMDEBUG opt_cam.h 346CAM_DEBUG_COMPILE opt_cam.h 347CAM_DEBUG_DELAY opt_cam.h 348CAM_DEBUG_BUS opt_cam.h 349CAM_DEBUG_TARGET opt_cam.h 350CAM_DEBUG_LUN opt_cam.h 351CAM_DEBUG_FLAGS opt_cam.h 352CAM_BOOT_DELAY opt_cam.h 353CAM_IOSCHED_DYNAMIC opt_cam.h 354CAM_IO_STATS opt_cam.h 355CAM_TEST_FAILURE opt_cam.h 356SCSI_DELAY opt_scsi.h 357SCSI_NO_SENSE_STRINGS opt_scsi.h 358SCSI_NO_OP_STRINGS opt_scsi.h 359 360# Options used only in cam/ata/ata_da.c 361ATA_STATIC_ID opt_ada.h 362 363# Options used only in cam/scsi/scsi_cd.c 364CHANGER_MIN_BUSY_SECONDS opt_cd.h 365CHANGER_MAX_BUSY_SECONDS opt_cd.h 366 367# Options used only in cam/scsi/scsi_da.c 368DA_TRACK_REFS opt_da.h 369 370# Options used only in cam/scsi/scsi_sa.c. 371SA_IO_TIMEOUT opt_sa.h 372SA_SPACE_TIMEOUT opt_sa.h 373SA_REWIND_TIMEOUT opt_sa.h 374SA_ERASE_TIMEOUT opt_sa.h 375SA_1FM_AT_EOD opt_sa.h 376 377# Options used only in cam/scsi/scsi_pt.c 378SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 379 380# Options used only in cam/scsi/scsi_ses.c 381SES_ENABLE_PASSTHROUGH opt_ses.h 382 383# Options used in dev/sym/ (Symbios SCSI driver). 384SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 385 # disabled:0 (default), enabled:1 386SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 387 # disabled:0, enabled:1 (default) 388SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 389 # default:8, range:[1..64] 390 391# Options used only in dev/isp/* 392ISP_TARGET_MODE opt_isp.h 393ISP_FW_CRASH_DUMP opt_isp.h 394ISP_DEFAULT_ROLES opt_isp.h 395ISP_INTERNAL_TARGET opt_isp.h 396ISP_FCTAPE_OFF opt_isp.h 397 398# Options used only in dev/iscsi 399ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 400 401# Net stuff. 402ACCEPT_FILTER_DATA 403ACCEPT_FILTER_DNS 404ACCEPT_FILTER_HTTP 405ALTQ opt_global.h 406ALTQ_CBQ opt_altq.h 407ALTQ_CDNR opt_altq.h 408ALTQ_CODEL opt_altq.h 409ALTQ_DEBUG opt_altq.h 410ALTQ_HFSC opt_altq.h 411ALTQ_FAIRQ opt_altq.h 412ALTQ_NOPCC opt_altq.h 413ALTQ_PRIQ opt_altq.h 414ALTQ_RED opt_altq.h 415ALTQ_RIO opt_altq.h 416BOOTP opt_bootp.h 417BOOTP_BLOCKSIZE opt_bootp.h 418BOOTP_COMPAT opt_bootp.h 419BOOTP_NFSROOT opt_bootp.h 420BOOTP_NFSV3 opt_bootp.h 421BOOTP_WIRED_TO opt_bootp.h 422DEVICE_POLLING 423DUMMYNET opt_ipdn.h 424RATELIMIT opt_ratelimit.h 425RATELIMIT_DEBUG opt_ratelimit.h 426INET opt_inet.h 427INET6 opt_inet6.h 428STATS opt_global.h 429IPDIVERT 430IPFILTER opt_ipfilter.h 431IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 432IPFILTER_LOG opt_ipfilter.h 433IPFILTER_LOOKUP opt_ipfilter.h 434IPFIREWALL opt_ipfw.h 435IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 436IPFIREWALL_NAT opt_ipfw.h 437IPFIREWALL_NAT64 opt_ipfw.h 438IPFIREWALL_NPTV6 opt_ipfw.h 439IPFIREWALL_VERBOSE opt_ipfw.h 440IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 441IPFIREWALL_PMOD opt_ipfw.h 442IPSEC opt_ipsec.h 443IPSEC_DEBUG opt_ipsec.h 444IPSEC_SUPPORT opt_ipsec.h 445IPSTEALTH 446KERN_TLS 447KRPC 448LIBALIAS 449LIBMCHAIN 450MBUF_PROFILING 451MBUF_STRESS_TEST 452MROUTING opt_mrouting.h 453NFSLOCKD 454PCBGROUP opt_pcbgroup.h 455PF_DEFAULT_TO_DROP opt_pf.h 456ROUTE_MPATH opt_route.h 457ROUTETABLES opt_route.h 458FIB_ALGO opt_route.h 459RSS opt_rss.h 460SLIP_IFF_OPTS opt_slip.h 461TCPDEBUG 462TCPPCAP opt_global.h 463SIFTR 464TCP_BLACKBOX opt_global.h 465TCP_HHOOK opt_inet.h 466TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading 467TCP_RFC7413 opt_inet.h 468TCP_RFC7413_MAX_KEYS opt_inet.h 469TCP_RFC7413_MAX_PSKS opt_inet.h 470TCP_SIGNATURE opt_ipsec.h 471VLAN_ARRAY opt_vlan.h 472XDR 473XBONEHACK 474 475# 476# SCTP 477# 478SCTP opt_sctp.h 479SCTP_SUPPORT opt_sctp.h 480SCTP_DEBUG opt_sctp.h # Enable debug printfs 481SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 482SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 483SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 484SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 485SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 486SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 487SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 488SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 489SCTP_LOCAL_TRACE_BUF opt_sctp.h # Use tracebuffer exported via sysctl 490SCTP_DETAILED_STR_STATS opt_sctp.h # Use per PR-SCTP policy stream stats 491# 492# 493# 494 495# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 496# Each netgraph node type can be either be compiled into the kernel 497# or loaded dynamically. To get the former, include the corresponding 498# option below. Each type has its own man page, e.g. ng_async(4). 499NETGRAPH 500NETGRAPH_DEBUG opt_netgraph.h 501NETGRAPH_ASYNC opt_netgraph.h 502NETGRAPH_ATMLLC opt_netgraph.h 503NETGRAPH_ATM_ATMPIF opt_netgraph.h 504NETGRAPH_BLUETOOTH opt_netgraph.h 505NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 506NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 507NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 508NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 509NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 510NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 511NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 512NETGRAPH_BPF opt_netgraph.h 513NETGRAPH_BRIDGE opt_netgraph.h 514NETGRAPH_CAR opt_netgraph.h 515NETGRAPH_CHECKSUM opt_netgraph.h 516NETGRAPH_CISCO opt_netgraph.h 517NETGRAPH_DEFLATE opt_netgraph.h 518NETGRAPH_DEVICE opt_netgraph.h 519NETGRAPH_ECHO opt_netgraph.h 520NETGRAPH_EIFACE opt_netgraph.h 521NETGRAPH_ETHER opt_netgraph.h 522NETGRAPH_ETHER_ECHO opt_netgraph.h 523NETGRAPH_FEC opt_netgraph.h 524NETGRAPH_FRAME_RELAY opt_netgraph.h 525NETGRAPH_GIF opt_netgraph.h 526NETGRAPH_GIF_DEMUX opt_netgraph.h 527NETGRAPH_HOLE opt_netgraph.h 528NETGRAPH_IFACE opt_netgraph.h 529NETGRAPH_IP_INPUT opt_netgraph.h 530NETGRAPH_IPFW opt_netgraph.h 531NETGRAPH_KSOCKET opt_netgraph.h 532NETGRAPH_L2TP opt_netgraph.h 533NETGRAPH_LMI opt_netgraph.h 534NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 535NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 536NETGRAPH_NAT opt_netgraph.h 537NETGRAPH_NETFLOW opt_netgraph.h 538NETGRAPH_ONE2MANY opt_netgraph.h 539NETGRAPH_PATCH opt_netgraph.h 540NETGRAPH_PIPE opt_netgraph.h 541NETGRAPH_PPP opt_netgraph.h 542NETGRAPH_PPPOE opt_netgraph.h 543NETGRAPH_PPTPGRE opt_netgraph.h 544NETGRAPH_PRED1 opt_netgraph.h 545NETGRAPH_RFC1490 opt_netgraph.h 546NETGRAPH_SOCKET opt_netgraph.h 547NETGRAPH_SPLIT opt_netgraph.h 548NETGRAPH_SPPP opt_netgraph.h 549NETGRAPH_TAG opt_netgraph.h 550NETGRAPH_TCPMSS opt_netgraph.h 551NETGRAPH_TEE opt_netgraph.h 552NETGRAPH_TTY opt_netgraph.h 553NETGRAPH_UI opt_netgraph.h 554NETGRAPH_VJC opt_netgraph.h 555NETGRAPH_VLAN opt_netgraph.h 556 557# NgATM options 558NGATM_ATM opt_netgraph.h 559NGATM_ATMBASE opt_netgraph.h 560NGATM_SSCOP opt_netgraph.h 561NGATM_SSCFU opt_netgraph.h 562NGATM_UNI opt_netgraph.h 563NGATM_CCATM opt_netgraph.h 564 565# DRM options 566DRM_DEBUG opt_drm.h 567 568TI_SF_BUF_JUMBO opt_ti.h 569TI_JUMBO_HDRSPLIT opt_ti.h 570 571# Misc debug flags. Most of these should probably be replaced with 572# 'DEBUG', and then let people recompile just the interesting modules 573# with 'make CC="cc -DDEBUG"'. 574DEBUG_1284 opt_ppb_1284.h 575LPT_DEBUG opt_lpt.h 576PLIP_DEBUG opt_plip.h 577LOCKF_DEBUG opt_debug_lockf.h 578SI_DEBUG opt_debug_si.h 579IFMEDIA_DEBUG opt_ifmedia.h 580 581# Fb options 582FB_DEBUG opt_fb.h 583FB_INSTALL_CDEV opt_fb.h 584 585# ppbus related options 586PERIPH_1284 opt_ppb_1284.h 587DONTPROBE_1284 opt_ppb_1284.h 588 589# smbus related options 590ENABLE_ALART opt_intpm.h 591 592# These cause changes all over the kernel 593BLKDEV_IOSIZE opt_global.h 594BURN_BRIDGES opt_global.h 595DEBUG opt_global.h 596DEBUG_LOCKS opt_global.h 597DEBUG_VFS_LOCKS opt_global.h 598DFLTPHYS opt_global.h 599DIAGNOSTIC opt_global.h 600INVARIANT_SUPPORT opt_global.h 601INVARIANTS opt_global.h 602KASSERT_PANIC_OPTIONAL opt_global.h 603MAXCPU opt_global.h 604MAXMEMDOM opt_global.h 605MAXPHYS opt_maxphys.h 606MCLSHIFT opt_global.h 607MUTEX_NOINLINE opt_global.h 608LOCK_PROFILING opt_global.h 609LOCK_PROFILING_FAST opt_global.h 610MSIZE opt_global.h 611REGRESSION opt_global.h 612RWLOCK_NOINLINE opt_global.h 613SX_NOINLINE opt_global.h 614VFS_BIO_DEBUG opt_global.h 615 616# These are VM related options 617VM_KMEM_SIZE opt_vm.h 618VM_KMEM_SIZE_SCALE opt_vm.h 619VM_KMEM_SIZE_MAX opt_vm.h 620VM_NRESERVLEVEL opt_vm.h 621VM_LEVEL_0_ORDER opt_vm.h 622NO_SWAPPING opt_vm.h 623MALLOC_MAKE_FAILURES opt_vm.h 624MALLOC_PROFILE opt_vm.h 625MALLOC_DEBUG_MAXZONES opt_vm.h 626 627# The MemGuard replacement allocator used for tamper-after-free detection 628DEBUG_MEMGUARD opt_vm.h 629 630# The RedZone malloc(9) protection 631DEBUG_REDZONE opt_vm.h 632 633# Standard SMP options 634EARLY_AP_STARTUP opt_global.h 635SMP opt_global.h 636NUMA opt_global.h 637 638# Size of the kernel message buffer 639MSGBUF_SIZE opt_msgbuf.h 640 641# NFS options 642NFS_MINATTRTIMO opt_nfs.h 643NFS_MAXATTRTIMO opt_nfs.h 644NFS_MINDIRATTRTIMO opt_nfs.h 645NFS_MAXDIRATTRTIMO opt_nfs.h 646NFS_DEBUG opt_nfs.h 647 648# TMPFS options 649TMPFS_PAGES_MINRESERVED opt_tmpfs.h 650 651# Options for uart(4) 652UART_PPS_ON_CTS opt_uart.h 653UART_POLL_FREQ opt_uart.h 654UART_DEV_TOLERANCE_PCT opt_uart.h 655 656# options for bus/device framework 657BUS_DEBUG opt_bus.h 658 659# options for USB support 660USB_DEBUG opt_usb.h 661USB_HOST_ALIGN opt_usb.h 662USB_REQ_DEBUG opt_usb.h 663USB_TEMPLATE opt_usb.h 664USB_VERBOSE opt_usb.h 665USB_DMA_SINGLE_ALLOC opt_usb.h 666USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 667U3G_DEBUG opt_u3g.h 668UKBD_DFLT_KEYMAP opt_ukbd.h 669UPLCOM_INTR_INTERVAL opt_uplcom.h 670UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 671UVSCOM_INTR_INTERVAL opt_uvscom.h 672 673# options for the Realtek rtwn driver 674RTWN_DEBUG opt_rtwn.h 675RTWN_WITHOUT_UCODE opt_rtwn.h 676 677# Embedded system options 678INIT_PATH 679 680ROOTDEVNAME 681 682FDC_DEBUG opt_fdc.h 683PCFCLOCK_VERBOSE opt_pcfclock.h 684PCFCLOCK_MAX_RETRIES opt_pcfclock.h 685 686KTR opt_global.h 687KTR_ALQ opt_ktr.h 688KTR_MASK opt_ktr.h 689KTR_CPUMASK opt_ktr.h 690KTR_COMPILE opt_global.h 691KTR_BOOT_ENTRIES opt_global.h 692KTR_ENTRIES opt_global.h 693KTR_VERBOSE opt_ktr.h 694WITNESS opt_global.h 695WITNESS_KDB opt_witness.h 696WITNESS_NO_VNODE opt_witness.h 697WITNESS_SKIPSPIN opt_witness.h 698WITNESS_COUNT opt_witness.h 699OPENSOLARIS_WITNESS opt_global.h 700 701EPOCH_TRACE opt_global.h 702 703# options for ACPI support 704ACPI_DEBUG opt_acpi.h 705ACPI_MAX_TASKS opt_acpi.h 706ACPI_MAX_THREADS opt_acpi.h 707DEV_ACPI opt_acpi.h 708ACPI_EARLY_EPYC_WAR opt_acpi.h 709 710# options for IOMMU support 711IOMMU opt_iommu.h 712 713# ISA support 714DEV_ISA opt_isa.h 715ISAPNP opt_isa.h 716 717# various 'device presence' options. 718DEV_BPF opt_bpf.h 719DEV_CARP opt_carp.h 720DEV_NETMAP opt_global.h 721DEV_PCI opt_pci.h 722DEV_PF opt_pf.h 723DEV_PFLOG opt_pf.h 724DEV_PFSYNC opt_pf.h 725DEV_SPLASH opt_splash.h 726DEV_VLAN opt_vlan.h 727 728# ed driver 729ED_HPP opt_ed.h 730ED_3C503 opt_ed.h 731ED_SIC opt_ed.h 732 733# bce driver 734BCE_DEBUG opt_bce.h 735BCE_NVRAM_WRITE_SUPPORT opt_bce.h 736 737SOCKBUF_DEBUG opt_global.h 738 739 740# options for hifn driver 741HIFN_DEBUG opt_hifn.h 742HIFN_RNDTEST opt_hifn.h 743 744# options for safenet driver 745SAFE_DEBUG opt_safe.h 746SAFE_NO_RNG opt_safe.h 747SAFE_RNDTEST opt_safe.h 748 749# syscons/vt options 750MAXCONS opt_syscons.h 751SC_ALT_MOUSE_IMAGE opt_syscons.h 752SC_CUT_SPACES2TABS opt_syscons.h 753SC_CUT_SEPCHARS opt_syscons.h 754SC_DEBUG_LEVEL opt_syscons.h 755SC_DFLT_FONT opt_syscons.h 756SC_DFLT_TERM opt_syscons.h 757SC_DISABLE_KDBKEY opt_syscons.h 758SC_DISABLE_REBOOT opt_syscons.h 759SC_HISTORY_SIZE opt_syscons.h 760SC_KERNEL_CONS_ATTR opt_syscons.h 761SC_KERNEL_CONS_ATTRS opt_syscons.h 762SC_KERNEL_CONS_REV_ATTR opt_syscons.h 763SC_MOUSE_CHAR opt_syscons.h 764SC_NO_CUTPASTE opt_syscons.h 765SC_NO_FONT_LOADING opt_syscons.h 766SC_NO_HISTORY opt_syscons.h 767SC_NO_MODE_CHANGE opt_syscons.h 768SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 769SC_NO_SYSMOUSE opt_syscons.h 770SC_NO_TERM_DUMB opt_syscons.h 771SC_NO_TERM_SC opt_syscons.h 772SC_NO_TERM_TEKEN opt_syscons.h 773SC_NORM_ATTR opt_syscons.h 774SC_NORM_REV_ATTR opt_syscons.h 775SC_PIXEL_MODE opt_syscons.h 776SC_RENDER_DEBUG opt_syscons.h 777SC_TWOBUTTON_MOUSE opt_syscons.h 778VT_ALT_TO_ESC_HACK opt_syscons.h 779VT_FB_MAX_WIDTH opt_syscons.h 780VT_FB_MAX_HEIGHT opt_syscons.h 781VT_MAXWINDOWS opt_syscons.h 782VT_TWOBUTTON_MOUSE opt_syscons.h 783DEV_SC opt_syscons.h 784DEV_VT opt_syscons.h 785 786# teken terminal emulator options 787TEKEN_CONS25 opt_teken.h 788TEKEN_UTF8 opt_teken.h 789TERMINAL_KERN_ATTR opt_teken.h 790TERMINAL_NORM_ATTR opt_teken.h 791 792# options for printf 793PRINTF_BUFR_SIZE opt_printf.h 794BOOT_TAG opt_printf.h 795BOOT_TAG_SZ opt_printf.h 796 797# kbd options 798KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 799KBD_INSTALL_CDEV opt_kbd.h 800KBD_MAXRETRY opt_kbd.h 801KBD_MAXWAIT opt_kbd.h 802KBD_RESETDELAY opt_kbd.h 803KBDIO_DEBUG opt_kbd.h 804 805KBDMUX_DFLT_KEYMAP opt_kbdmux.h 806 807# options for the Atheros driver 808ATH_DEBUG opt_ath.h 809ATH_TXBUF opt_ath.h 810ATH_RXBUF opt_ath.h 811ATH_DIAGAPI opt_ath.h 812ATH_TX99_DIAG opt_ath.h 813ATH_ENABLE_11N opt_ath.h 814ATH_ENABLE_DFS opt_ath.h 815ATH_EEPROM_FIRMWARE opt_ath.h 816ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 817ATH_DEBUG_ALQ opt_ath.h 818ATH_KTR_INTR_DEBUG opt_ath.h 819 820# options for the Atheros hal 821# XXX For now, this breaks non-AR9130 chipsets, so only use it 822# XXX when actually targeting AR9130. 823AH_SUPPORT_AR9130 opt_ah.h 824 825# This is required for AR933x SoC support 826AH_SUPPORT_AR9330 opt_ah.h 827AH_SUPPORT_AR9340 opt_ah.h 828AH_SUPPORT_QCA9530 opt_ah.h 829AH_SUPPORT_QCA9550 opt_ah.h 830 831AH_DEBUG opt_ah.h 832AH_ASSERT opt_ah.h 833AH_DEBUG_ALQ opt_ah.h 834AH_REGOPS_FUNC opt_ah.h 835AH_WRITE_REGDOMAIN opt_ah.h 836AH_DEBUG_COUNTRY opt_ah.h 837AH_WRITE_EEPROM opt_ah.h 838AH_PRIVATE_DIAG opt_ah.h 839AH_NEED_DESC_SWAP opt_ah.h 840AH_USE_INIPDGAIN opt_ah.h 841AH_MAXCHAN opt_ah.h 842AH_RXCFG_SDMAMW_4BYTES opt_ah.h 843AH_INTERRUPT_DEBUGGING opt_ah.h 844# AR5416 and later interrupt mitigation 845# XXX do not use this for AR9130 846AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 847 848# options for the Altera mSGDMA driver (altera_msgdma) 849ALTERA_MSGDMA_DESC_STD opt_altera_msgdma.h 850ALTERA_MSGDMA_DESC_EXT opt_altera_msgdma.h 851ALTERA_MSGDMA_DESC_PF_STD opt_altera_msgdma.h 852ALTERA_MSGDMA_DESC_PF_EXT opt_altera_msgdma.h 853 854# options for the Broadcom BCM43xx driver (bwi) 855BWI_DEBUG opt_bwi.h 856BWI_DEBUG_VERBOSE opt_bwi.h 857 858# options for the Brodacom BCM43xx driver (bwn) 859BWN_DEBUG opt_bwn.h 860BWN_GPL_PHY opt_bwn.h 861BWN_USE_SIBA opt_bwn.h 862 863# Options for the SIBA driver 864SIBA_DEBUG opt_siba.h 865 866# options for the Marvell 8335 wireless driver 867MALO_DEBUG opt_malo.h 868MALO_TXBUF opt_malo.h 869MALO_RXBUF opt_malo.h 870 871# options for the Marvell wireless driver 872MWL_DEBUG opt_mwl.h 873MWL_TXBUF opt_mwl.h 874MWL_RXBUF opt_mwl.h 875MWL_DIAGAPI opt_mwl.h 876MWL_AGGR_SIZE opt_mwl.h 877MWL_TX_NODROP opt_mwl.h 878 879# Options for the Marvell NETA driver 880MVNETA_MULTIQUEUE opt_mvneta.h 881MVNETA_KTR opt_mvneta.h 882 883# Options for the Intel 802.11ac wireless driver 884IWM_DEBUG opt_iwm.h 885 886# Options for the Intel 802.11n wireless driver 887IWN_DEBUG opt_iwn.h 888 889# Options for the Intel 3945ABG wireless driver 890WPI_DEBUG opt_wpi.h 891 892# dcons options 893DCONS_BUF_SIZE opt_dcons.h 894DCONS_POLL_HZ opt_dcons.h 895DCONS_FORCE_CONSOLE opt_dcons.h 896DCONS_FORCE_GDB opt_dcons.h 897 898# HWPMC options 899HWPMC_DEBUG opt_global.h 900HWPMC_HOOKS 901HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h 902 903# 802.11 support layer 904IEEE80211_DEBUG opt_wlan.h 905IEEE80211_DEBUG_REFCNT opt_wlan.h 906IEEE80211_SUPPORT_MESH opt_wlan.h 907IEEE80211_SUPPORT_SUPERG opt_wlan.h 908IEEE80211_SUPPORT_TDMA opt_wlan.h 909IEEE80211_ALQ opt_wlan.h 910IEEE80211_DFS_DEBUG opt_wlan.h 911 912# 802.11 TDMA support 913TDMA_SLOTLEN_DEFAULT opt_tdma.h 914TDMA_SLOTCNT_DEFAULT opt_tdma.h 915TDMA_BINTVAL_DEFAULT opt_tdma.h 916TDMA_TXRATE_11B_DEFAULT opt_tdma.h 917TDMA_TXRATE_11G_DEFAULT opt_tdma.h 918TDMA_TXRATE_11A_DEFAULT opt_tdma.h 919TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 920TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 921TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 922TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 923TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 924 925# VideoMode 926PICKMODE_DEBUG opt_videomode.h 927 928# Network stack virtualization options 929VIMAGE opt_global.h 930VNET_DEBUG opt_global.h 931 932# Common Flash Interface (CFI) options 933CFI_SUPPORT_STRATAFLASH opt_cfi.h 934CFI_ARMEDANDDANGEROUS opt_cfi.h 935CFI_HARDWAREBYTESWAP opt_cfi.h 936 937# Sound options 938SND_DEBUG opt_snd.h 939SND_DIAGNOSTIC opt_snd.h 940SND_FEEDER_MULTIFORMAT opt_snd.h 941SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 942SND_FEEDER_RATE_HP opt_snd.h 943SND_PCM_64 opt_snd.h 944SND_OLDSTEREO opt_snd.h 945 946X86BIOS 947 948# Flattened device tree options 949FDT opt_platform.h 950FDT_DTB_STATIC opt_platform.h 951 952# OFED Infiniband stack 953OFED opt_ofed.h 954OFED_DEBUG_INIT opt_ofed.h 955SDP opt_ofed.h 956SDP_DEBUG opt_ofed.h 957IPOIB opt_ofed.h 958IPOIB_DEBUG opt_ofed.h 959IPOIB_CM opt_ofed.h 960 961# Resource Accounting 962RACCT opt_global.h 963RACCT_DEFAULT_TO_DISABLED opt_global.h 964 965# Resource Limits 966RCTL opt_global.h 967 968# Random number generator(s) 969# Alternative RNG algorithm. 970RANDOM_FENESTRASX opt_global.h 971# With this, no entropy processor is loaded, but the entropy 972# harvesting infrastructure is present. This means an entropy 973# processor may be loaded as a module. 974RANDOM_LOADABLE opt_global.h 975# This turns on high-rate and potentially expensive harvesting in 976# the uma slab allocator. 977RANDOM_ENABLE_UMA opt_global.h 978RANDOM_ENABLE_ETHER opt_global.h 979 980# This options turns TPM into entropy source. 981TPM_HARVEST opt_tpm.h 982 983# BHND(4) driver 984BHND_LOGLEVEL opt_global.h 985 986# GPIO and child devices 987GPIO_SPI_DEBUG opt_gpio.h 988 989# SPI devices 990SPIGEN_LEGACY_CDEVNAME opt_spi.h 991 992# etherswitch(4) driver 993RTL8366_SOFT_RESET opt_etherswitch.h 994 995# evdev protocol support 996EVDEV_SUPPORT opt_evdev.h 997EVDEV_DEBUG opt_evdev.h 998UINPUT_DEBUG opt_evdev.h 999 1000# Hyper-V network driver 1001HN_DEBUG opt_hn.h 1002 1003# CAM-based MMC stack 1004MMCCAM 1005# Encrypted kernel crash dumps 1006EKCD opt_ekcd.h 1007 1008# NVME options 1009NVME_USE_NVD opt_nvme.h 1010 1011# amdsbwd options 1012AMDSBWD_DEBUG opt_amdsbwd.h 1013 1014# gcov support 1015GCOV opt_global.h 1016LINDEBUGFS 1017 1018# options for HID support 1019HID_DEBUG opt_hid.h 1020IICHID_DEBUG opt_hid.h 1021IICHID_SAMPLING opt_hid.h 1022HKBD_DFLT_KEYMAP opt_hkbd.h 1023HIDRAW_MAKE_UHID_ALIAS opt_hid.h 1024 1025# kenv options 1026# The early kernel environment (loader environment, config(8)-provided static) 1027# is typically cleared after the dynamic environment comes up to ensure that 1028# we're not inadvertently holding on to 'secret' values in these stale envs. 1029# This option is insecure except in controlled environments where the static 1030# environment's contents are known to be safe. 1031PRESERVE_EARLY_KENV opt_global.h 1032