1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affect only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33# Adaptec Array Controller driver options 34AAC_DEBUG opt_aac.h # Debugging levels: 35 # 0 - quiet, only emit warnings 36 # 1 - noisy, emit major function 37 # points and things done 38 # 2 - extremely noisy, emit trace 39 # items in loops, etc. 40 41# Adaptec aic7xxx SCSI controller options 42AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory 43 # mapped I/O 44 45AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable 46 # targetmode operations. 47 48AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our 49 # configuration prom. 50 51AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code. 52 53AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options. 54 # See sys/dev/aic7xxx/aic7xxx.h 55 56AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug 57 # output. Adds ~128k to driver. 58 59# Adaptec aic79xx SCSI controller options 60AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code. 61 62AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options. 63 # See sys/dev/aic7xxx/aic79xx.h 64 65AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable 66 # targetmode operations. 67 68AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug 69 # output. Adds ~215k to driver. 70 71ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 72 # mapped I/O 73 74# Miscellaneous options. 75ALQ opt_alq.h 76ADAPTIVE_MUTEXES 77COMPAT_43 opt_compat.h 78COMPAT_FREEBSD4 opt_compat.h 79COMPAT_SUNOS opt_compat.h 80NO_COMPAT_FREEBSD4 opt_compat.h 81COMPILING_LINT opt_global.h 82CY_PCI_FASTINTR 83CONSPEED opt_comconsole.h 84DDB 85DDB_NOKLDSYM opt_ddb.h 86DDB_TRACE 87DDB_UNATTENDED 88GDB_REMOTE_CHAT opt_ddb.h 89GDBSPEED opt_ddb.h 90NO_GEOM opt_geom.h 91GEOM_AES opt_geom.h 92GEOM_BDE opt_geom.h 93GEOM_BSD opt_geom.h 94GEOM_GPT opt_geom.h 95GEOM_MBR opt_geom.h 96GEOM_PC98 opt_geom.h 97GEOM_SUNLABEL opt_geom.h 98HW_WDOG 99KSTACK_PAGES 100KSTACK_MAX_PAGES 101KTRACE 102KTRACE_REQUEST_POOL opt_ktrace.h 103LIBICONV 104MD_ROOT opt_md.h 105MD_ROOT_SIZE opt_md.h 106NDGBPORTS opt_dgb.h 107NODEVFS opt_devfs.h 108NTIMECOUNTER opt_ntp.h 109NSWAPDEV opt_swap.h 110PANIC_REBOOT_WAIT_TIME opt_panic.h 111PPS_SYNC opt_ntp.h 112PUC_FASTINTR opt_puc.h 113QUOTA 114SHOW_BUSYBUFS 115SPX_HACK 116SUIDDIR opt_suiddir.h 117MSGMNB opt_sysvipc.h 118MSGMNI opt_sysvipc.h 119MSGSEG opt_sysvipc.h 120MSGSSZ opt_sysvipc.h 121MSGTQL opt_sysvipc.h 122SEMMAP opt_sysvipc.h 123SEMMNI opt_sysvipc.h 124SEMMNS opt_sysvipc.h 125SEMMNU opt_sysvipc.h 126SEMMSL opt_sysvipc.h 127SEMOPM opt_sysvipc.h 128SEMUME opt_sysvipc.h 129SHMALL opt_sysvipc.h 130SHMMAX opt_sysvipc.h 131SHMMAXPGS opt_sysvipc.h 132SHMMIN opt_sysvipc.h 133SHMMNI opt_sysvipc.h 134SHMSEG opt_sysvipc.h 135SYSVMSG opt_sysvipc.h 136SYSVSEM opt_sysvipc.h 137SYSVSHM opt_sysvipc.h 138VFS_AIO 139WLCACHE opt_wavelan.h 140WLDEBUG opt_wavelan.h 141 142# POSIX kernel options 143_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 144P1003_1B_SEMAPHORES opt_posix.h 145 146##################################################################### 147# SECURITY POLICY PARAMETERS 148 149# Support for Mandatory Access Control (MAC) 150MAC opt_mac.h 151MAC_BIBA opt_dontuse.h 152MAC_BSDEXTENDED opt_dontuse.h 153MAC_DEBUG opt_mac.h 154MAC_IFOFF opt_dontuse.h 155MAC_LOMAC opt_dontuse.h 156MAC_MLS opt_dontuse.h 157MAC_NONE opt_dontuse.h 158MAC_PARTITION opt_dontuse.h 159MAC_SEEOTHERUIDS opt_dontuse.h 160MAC_TEST opt_dontuse.h 161 162# Do we want the config file compiled into the kernel? 163INCLUDE_CONFIG_FILE opt_config.h 164 165# Options for static filesystems. These should only be used at config 166# time, since the corresponding lkms cannot work if there are any static 167# dependencies. Unusability is enforced by hiding the defines for the 168# options in a never-included header. 169CD9660 opt_dontuse.h 170CODA opt_dontuse.h 171EXT2FS opt_dontuse.h 172FDESCFS opt_dontuse.h 173LINPROCFS opt_dontuse.h 174MSDOSFS opt_dontuse.h 175NULLFS opt_dontuse.h 176NWFS opt_dontuse.h 177PORTALFS opt_dontuse.h 178PROCFS opt_dontuse.h 179PSEUDOFS opt_dontuse.h 180UMAPFS opt_dontuse.h 181NTFS opt_dontuse.h 182HPFS opt_dontuse.h 183SMBFS opt_dontuse.h 184UNIONFS opt_dontuse.h 185UDF opt_dontuse.h 186 187# Broken - ffs_snapshot() dependency from ufs_lookup() :-( 188FFS opt_ffs_broken_fixme.h 189 190# These static filesystems has one slightly bogus static dependency in 191# sys/i386/i386/autoconf.c. If any of these filesystems are 192# statically compiled into the kernel, code for mounting them as root 193# filesystems will be enabled - but look below. 194NFSCLIENT opt_nfs.h 195NFSSERVER opt_nfs.h 196 197# If you are following the conditions in the copyright, 198# you can enable soft-updates which will speed up a lot of thigs 199# and make the system safer from crashes at the same time. 200# otherwise a STUB module will be compiled in. 201SOFTUPDATES opt_ffs.h 202 203# Enabling this option turns on support for Access Control Lists in UFS, 204# which can be used to support high security configurations. Depends on 205# UFS_EXTATTR. 206UFS_ACL opt_ufs.h 207 208# Enabling this option turns on support for extended attributes in UFS-based 209# filesystems, which can be used to support high security configurations 210# as well as new filesystem features. 211UFS_EXTATTR opt_ufs.h 212UFS_EXTATTR_AUTOSTART opt_ufs.h 213 214# Enable fast hash lookups for large directories on UFS-based filesystems. 215UFS_DIRHASH opt_ufs.h 216 217# The above static dependencies are planned removed, with a 218# <filesystem>_ROOT option to control if it usable as root. This list 219# allows these options to be present in config files already (though 220# they won't make any difference yet). 221NFS_ROOT opt_nfsroot.h 222 223# SMB/CIFS requester 224NETSMB opt_netsmb.h 225NETSMBCRYPTO opt_netsmb.h 226 227# Options used only in subr_param.c. 228HZ opt_param.h 229MAXFILES opt_param.h 230NBUF opt_param.h 231NMBCLUSTERS opt_param.h 232NSFBUFS opt_param.h 233VM_BCACHE_SIZE_MAX opt_param.h 234VM_SWZONE_SIZE_MAX opt_param.h 235MAXUSERS 236DFLDSIZ opt_param.h 237MAXDSIZ opt_param.h 238MAXSSIZ opt_param.h 239 240# Generic SCSI options. 241CAM_MAX_HIGHPOWER opt_cam.h 242CAMDEBUG opt_cam.h 243CAM_DEBUG_DELAY opt_cam.h 244CAM_DEBUG_BUS opt_cam.h 245CAM_DEBUG_TARGET opt_cam.h 246CAM_DEBUG_LUN opt_cam.h 247CAM_DEBUG_FLAGS opt_cam.h 248CAM_NEW_TRAN_CODE opt_cam.h 249SCSI_DELAY opt_scsi.h 250SCSI_NO_SENSE_STRINGS opt_scsi.h 251SCSI_NO_OP_STRINGS opt_scsi.h 252 253 254 255# Options used only in cam/scsi/scsi_cd.c 256CHANGER_MIN_BUSY_SECONDS opt_cd.h 257CHANGER_MAX_BUSY_SECONDS opt_cd.h 258 259# Options used only in cam/scsi/scsi_sa.c. 260SA_IO_TIMEOUT opt_sa.h 261SA_SPACE_TIMEOUT opt_sa.h 262SA_REWIND_TIMEOUT opt_sa.h 263SA_ERASE_TIMEOUT opt_sa.h 264SA_1FM_AT_EOD opt_sa.h 265 266# Options used only in cam/scsi/scsi_pt.c 267SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 268 269# Options used only in cam/scsi/scsi_ses.c 270SES_ENABLE_PASSTHROUGH opt_ses.h 271 272# Options used in dev/sym/ (Symbios SCSI driver). 273SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 274 # Allows the ncr to take precedence 275 # 1 (1<<0) -> 810a, 860 276 # 2 (1<<1) -> 825a, 875, 885, 895 277 # 4 (1<<2) -> 895a, 896, 1510d 278SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 279 # disabled:0 (default), enabled:1 280SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 281 # disabled:0, enabled:1 (default) 282SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 283 # default:8, range:[1..64] 284 285# Options used only in pci/ncr.c 286SCSI_NCR_DEBUG opt_ncr.h 287SCSI_NCR_MAX_SYNC opt_ncr.h 288SCSI_NCR_MAX_WIDE opt_ncr.h 289SCSI_NCR_MYADDR opt_ncr.h 290 291# Options used only in dev/isp/* 292ISP_TARGET_MODE opt_isp.h 293ISP_FW_CRASH_DUMP opt_isp.h 294 295# Options used in the 'ata' ATA/ATAPI driver 296ATA_STATIC_ID opt_ata.h 297ATA_NOPCI opt_ata.h 298DEV_ATADISK opt_ata.h 299DEV_ATAPICD opt_ata.h 300DEV_ATAPIST opt_ata.h 301DEV_ATAPIFD opt_ata.h 302DEV_ATAPICAM opt_ata.h 303ATA_DEBUG opt_ata.h 304ATAPI_DEBUG opt_ata.h 305ACD_DEBUG opt_ata.h 306AST_DEBUG opt_ata.h 307 308# Net stuff. 309ACCEPT_FILTER_DATA 310ACCEPT_FILTER_HTTP 311BOOTP opt_bootp.h 312BOOTP_COMPAT opt_bootp.h 313BOOTP_NFSROOT opt_bootp.h 314BOOTP_NFSV3 opt_bootp.h 315BOOTP_WIRED_TO opt_bootp.h 316BRIDGE opt_bdg.h 317ETHER_II opt_ef.h 318ETHER_8023 opt_ef.h 319ETHER_8022 opt_ef.h 320ETHER_SNAP opt_ef.h 321MROUTING opt_mrouting.h 322INET opt_inet.h 323INET6 opt_inet6.h 324IPSEC opt_ipsec.h 325IPSEC_ESP opt_ipsec.h 326IPSEC_DEBUG opt_ipsec.h 327FAST_IPSEC opt_ipsec.h 328IPDIVERT 329DUMMYNET opt_ipdn.h 330IPFILTER opt_ipfilter.h 331IPFILTER_LOG opt_ipfilter.h 332IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 333PFIL_HOOKS opt_pfil_hooks.h 334IPFIREWALL opt_ipfw.h 335IPFIREWALL_VERBOSE opt_ipfw.h 336IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 337IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 338IPFIREWALL_FORWARD opt_ipfw.h 339IPV6FIREWALL opt_ip6fw.h 340IPV6FIREWALL_VERBOSE opt_ip6fw.h 341IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 342IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 343IPSTEALTH 344IPX opt_ipx.h 345IPXIP opt_ipx.h 346IPTUNNEL opt_ipx.h 347LIBMCHAIN 348NCP opt_ncp.h 349NETATALK opt_atalk.h 350NS opt_ns.h 351PPP_BSDCOMP opt_ppp.h 352PPP_DEFLATE opt_ppp.h 353PPP_FILTER opt_ppp.h 354RANDOM_IP_ID 355SLIP_IFF_OPTS opt_slip.h 356TCPDEBUG 357TCP_DROP_SYNFIN opt_tcp_input.h 358XBONEHACK 359 360# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 361# Each netgraph node type can be either be compiled into the kernel 362# or loaded dynamically. To get the former, include the corresponding 363# option below. Each type has its own man page, e.g. ng_async(4). 364NETGRAPH 365NETGRAPH_ASYNC opt_netgraph.h 366NETGRAPH_BPF opt_netgraph.h 367NETGRAPH_BRIDGE opt_netgraph.h 368NETGRAPH_CISCO opt_netgraph.h 369NETGRAPH_ECHO opt_netgraph.h 370NETGRAPH_ETHER opt_netgraph.h 371NETGRAPH_FRAME_RELAY opt_netgraph.h 372NETGRAPH_GIF opt_netgraph.h 373NETGRAPH_GIF_DEMUX opt_netgraph.h 374NETGRAPH_HOLE opt_netgraph.h 375NETGRAPH_IFACE opt_netgraph.h 376NETGRAPH_IP_INPUT opt_netgraph.h 377NETGRAPH_KSOCKET opt_netgraph.h 378NETGRAPH_LMI opt_netgraph.h 379NETGRAPH_L2TP opt_netgraph.h 380# MPPC compression requires proprietary files (not included) 381NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 382NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 383NETGRAPH_ONE2MANY opt_netgraph.h 384NETGRAPH_PPP opt_netgraph.h 385NETGRAPH_PPPOE opt_netgraph.h 386NETGRAPH_PPTPGRE opt_netgraph.h 387NETGRAPH_RFC1490 opt_netgraph.h 388NETGRAPH_SOCKET opt_netgraph.h 389NETGRAPH_SPLIT opt_netgraph.h 390NETGRAPH_TEE opt_netgraph.h 391NETGRAPH_TTY opt_netgraph.h 392NETGRAPH_UI opt_netgraph.h 393NETGRAPH_VJC opt_netgraph.h 394 395# DRM options 396DRM_LINUX opt_drm.h 397DRM_DEBUG opt_drm.h 398 399 400ZERO_COPY_SOCKETS opt_zero.h 401TI_PRIVATE_JUMBOS opt_ti.h 402TI_JUMBO_HDRSPLIT opt_ti.h 403 404# ATM (HARP version) 405ATM_CORE opt_atm.h 406ATM_IP opt_atm.h 407ATM_SIGPVC opt_atm.h 408ATM_SPANS opt_atm.h 409ATM_UNI opt_atm.h 410 411# XXX Conflict: # of devices vs network protocol (Native ATM). 412# This makes "atm.h" unusable. 413NATM opt_natm.h 414 415DPT_ALLOW_MEMIO opt_dpt.h # Allow PCI devices to use memory 416 # mapped I/O 417# DPT driver debug flags 418DPT_MEASURE_PERFORMANCE opt_dpt.h 419DPT_HANDLE_TIMEOUTS opt_dpt.h 420DPT_TIMEOUT_FACTOR opt_dpt.h 421DPT_LOST_IRQ opt_dpt.h 422DPT_RESET_HBA opt_dpt.h 423 424# Adaptec ASR and DPT V/VI controller options 425ASR_MEASURE_PERFORMANCE opt_asr.h 426 427# Misc debug flags. Most of these should probably be replaced with 428# 'DEBUG', and then let people recompile just the interesting modules 429# with 'make CC="cc -DDEBUG"'. 430CLUSTERDEBUG opt_debug_cluster.h 431DEBUG_1284 opt_ppb_1284.h 432VP0_DEBUG opt_vpo.h 433LPT_DEBUG opt_lpt.h 434PLIP_DEBUG opt_plip.h 435LOCKF_DEBUG opt_debug_lockf.h 436NPX_DEBUG opt_debug_npx.h 437NETATALKDEBUG opt_atalk.h 438SI_DEBUG opt_debug_si.h 439 440# Fb options 441FB_DEBUG opt_fb.h 442FB_INSTALL_CDEV opt_fb.h 443 444# ppbus related options 445PERIPH_1284 opt_ppb_1284.h 446DONTPROBE_1284 opt_ppb_1284.h 447 448# smbus related options 449ENABLE_ALART opt_intpm.h 450 451# These cause changes all over the kernel 452BLKDEV_IOSIZE opt_global.h 453DEBUG opt_global.h 454DEBUG_LOCKS opt_global.h 455DEBUG_VFS_LOCKS opt_global.h 456LOOKUP_SHARED opt_global.h 457DIAGNOSTIC opt_global.h 458ENABLE_VFS_IOOPT opt_global.h 459INVARIANT_SUPPORT opt_global.h 460INVARIANTS opt_global.h 461MCLSHIFT opt_global.h 462MSIZE opt_global.h 463REGRESSION opt_global.h 464RESTARTABLE_PANICS opt_global.h 465VFS_BIO_DEBUG opt_global.h 466 467# These are VM related options 468VM_KMEM_SIZE opt_vm.h 469VM_KMEM_SIZE_SCALE opt_vm.h 470VM_KMEM_SIZE_MAX opt_vm.h 471NO_SWAPPING opt_vm.h 472MALLOC_PROFILE opt_vm.h 473PQ_NOOPT opt_vmpage.h 474PQ_NORMALCACHE opt_vmpage.h 475PQ_MEDIUMCACHE opt_vmpage.h 476PQ_LARGECACHE opt_vmpage.h 477PQ_HUGECACHE opt_vmpage.h 478PQ_CACHESIZE opt_vmpage.h 479 480# Standard SMP options 481SMP opt_global.h 482 483# Size of the kernel message buffer 484MSGBUF_SIZE opt_msgbuf.h 485 486# NFS options 487NFS_MINATTRTIMO opt_nfs.h 488NFS_MAXATTRTIMO opt_nfs.h 489NFS_MINDIRATTRTIMO opt_nfs.h 490NFS_MAXDIRATTRTIMO opt_nfs.h 491NFS_GATHERDELAY opt_nfs.h 492NFS_WDELAYHASHSIZ opt_nfs.h 493NFS_DEBUG opt_nfs.h 494 495# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 496OVERRIDE_CARD opt_bktr.h 497OVERRIDE_TUNER opt_bktr.h 498OVERRIDE_DBX opt_bktr.h 499OVERRIDE_MSP opt_bktr.h 500BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 501BROOKTREE_ALLOC_PAGES opt_bktr.h 502BKTR_OVERRIDE_CARD opt_bktr.h 503BKTR_OVERRIDE_TUNER opt_bktr.h 504BKTR_OVERRIDE_DBX opt_bktr.h 505BKTR_OVERRIDE_MSP opt_bktr.h 506BKTR_SYSTEM_DEFAULT opt_bktr.h 507BKTR_ALLOC_PAGES opt_bktr.h 508BKTR_USE_PLL opt_bktr.h 509BKTR_GPIO_ACCESS opt_bktr.h 510BKTR_NO_MSP_RESET opt_bktr.h 511BKTR_430_FX_MODE opt_bktr.h 512BKTR_SIS_VIA_MODE opt_bktr.h 513BKTR_USE_FREEBSD_SMBUS opt_bktr.h 514 515# meteor opt_meteor.h 516METEOR_ALLOC_PAGES opt_meteor.h 517METEOR_TEST_VIDEO opt_meteor.h 518METEOR_SYSTEM_DEFAULT opt_meteor.h 519METEOR_DEALLOC_PAGES opt_meteor.h 520METEOR_DEALLOC_ABOVE opt_meteor.h 521 522# Various mi ISA bus flags 523COM_ESP opt_sio.h 524COM_MULTIPORT opt_sio.h 525BREAK_TO_DEBUGGER opt_comconsole.h 526ALT_BREAK_TO_DEBUGGER opt_comconsole.h 527DEV_ISA opt_isa.h 528 529# Include tweaks for running under the SimOS machine simulator. 530SIMOS opt_simos.h 531 532# options for bus/device framework 533BUS_DEBUG opt_bus.h 534 535# options for USB support 536UHCI_DEBUG opt_usb.h 537OHCI_DEBUG opt_usb.h 538USB_DEBUG opt_usb.h 539UGEN_DEBUG opt_usb.h 540UHID_DEBUG opt_usb.h 541UHUB_DEBUG opt_usb.h 542UKBD_DEBUG opt_usb.h 543ULPT_DEBUG opt_usb.h 544UMASS_DEBUG opt_usb.h 545UMS_DEBUG opt_usb.h 546URIO_DEBUG opt_usb.h 547UKBD_DFLT_KEYMAP opt_ukbd.h 548 549# Vinum options 550VINUMDEBUG opt_vinum.h 551 552# Embedded system options 553INIT_PATH opt_init_path.h 554 555ROOTDEVNAME opt_rootdevname.h 556 557FDC_DEBUG opt_fdc.h 558PCFCLOCK_VERBOSE opt_pcfclock.h 559PCFCLOCK_MAX_RETRIES opt_pcfclock.h 560 561# RAIDframe options 562RAID_AUTOCONFIG opt_raid.h 563RAID_DEBUG opt_raid.h 564TDFX_LINUX opt_tdfx.h 565 566KTR opt_global.h 567KTR_ALQ opt_ktr.h 568KTR_MASK opt_ktr.h 569KTR_CPUMASK opt_ktr.h 570KTR_COMPILE opt_global.h 571KTR_ENTRIES opt_global.h 572KTR_VERBOSE opt_ktr.h 573MUTEX_DEBUG opt_global.h 574WITNESS opt_global.h 575WITNESS_DDB opt_witness.h 576WITNESS_SKIPSPIN opt_witness.h 577 578# options for ACPI support 579ACPI_DEBUG opt_acpi.h 580ACPI_NO_SEMAPHORES opt_acpi.h 581ACPI_MAX_THREADS opt_acpi.h 582 583# options for DEVFS, see sys/fs/devfs/devfs.h 584NDEVFSINO opt_devfs.h 585NDEVFSOVERFLOW opt_devfs.h 586 587# various 'device presence' options. 588DEV_MCA opt_mca.h 589DEV_BPF opt_bpf.h 590 591# ed driver 592ED_NO_MIIBUS opt_ed.h 593 594# wi driver 595WI_SYMBOL_FIRMWARE opt_wi.h 596 597# Polling device handling 598DEVICE_POLLING opt_global.h 599 600# Mutex profiling 601MUTEX_PROFILING opt_global.h 602 603