1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affects only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AACRAID_DEBUG opt_aacraid.h 35AHC_ALLOW_MEMIO opt_aic7xxx.h 36AHC_TMODE_ENABLE opt_aic7xxx.h 37AHC_DUMP_EEPROM opt_aic7xxx.h 38AHC_DEBUG opt_aic7xxx.h 39AHC_DEBUG_OPTS opt_aic7xxx.h 40AHC_REG_PRETTY_PRINT opt_aic7xxx.h 41AHD_DEBUG opt_aic79xx.h 42AHD_DEBUG_OPTS opt_aic79xx.h 43AHD_TMODE_ENABLE opt_aic79xx.h 44AHD_REG_PRETTY_PRINT opt_aic79xx.h 45ADW_ALLOW_MEMIO opt_adw.h 46 47TWA_DEBUG opt_twa.h 48TWA_FLASH_FIRMWARE opt_twa.h 49 50# Debugging options. 51ALT_BREAK_TO_DEBUGGER opt_kdb.h 52BREAK_TO_DEBUGGER opt_kdb.h 53DDB 54DDB_BUFR_SIZE opt_ddb.h 55DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 56DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 57DDB_CTF opt_ddb.h 58DDB_NUMSYM opt_ddb.h 59GDB 60KDB opt_global.h 61KDB_TRACE opt_kdb.h 62KDB_UNATTENDED opt_kdb.h 63KLD_DEBUG opt_kld.h 64SYSCTL_DEBUG opt_sysctl.h 65EARLY_PRINTF opt_global.h 66TEXTDUMP_PREFERRED opt_ddb.h 67TEXTDUMP_VERBOSE opt_ddb.h 68 69# Miscellaneous options. 70ADAPTIVE_LOCKMGRS 71ALQ 72ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h 73ATSE_CFI_HACK opt_cfi.h 74AUDIT opt_global.h 75BOOTHOWTO opt_global.h 76BOOTVERBOSE opt_global.h 77CALLOUT_PROFILING 78CAPABILITIES opt_capsicum.h 79CAPABILITY_MODE opt_capsicum.h 80COMPAT_43 opt_compat.h 81COMPAT_43TTY opt_compat.h 82COMPAT_FREEBSD4 opt_compat.h 83COMPAT_FREEBSD5 opt_compat.h 84COMPAT_FREEBSD6 opt_compat.h 85COMPAT_FREEBSD7 opt_compat.h 86COMPAT_FREEBSD9 opt_compat.h 87COMPAT_FREEBSD10 opt_compat.h 88COMPAT_LINUXAPI opt_compat.h 89COMPILING_LINT opt_global.h 90COMPRESS_USER_CORES opt_core.h 91CY_PCI_FASTINTR 92DEADLKRES opt_watchdog.h 93DIRECTIO 94FILEMON opt_dontuse.h 95FFCLOCK 96FULL_PREEMPTION opt_sched.h 97IMAGACT_BINMISC opt_dontuse.h 98IPI_PREEMPTION opt_sched.h 99GEOM_AES opt_geom.h 100GEOM_BDE opt_geom.h 101GEOM_BSD opt_geom.h 102GEOM_CACHE opt_geom.h 103GEOM_CONCAT opt_geom.h 104GEOM_ELI opt_geom.h 105GEOM_FOX opt_geom.h 106GEOM_GATE opt_geom.h 107GEOM_JOURNAL opt_geom.h 108GEOM_LABEL opt_geom.h 109GEOM_LABEL_GPT opt_geom.h 110GEOM_LINUX_LVM opt_geom.h 111GEOM_MBR opt_geom.h 112GEOM_MIRROR opt_geom.h 113GEOM_MULTIPATH opt_geom.h 114GEOM_NOP opt_geom.h 115GEOM_PART_APM opt_geom.h 116GEOM_PART_BSD opt_geom.h 117GEOM_PART_BSD64 opt_geom.h 118GEOM_PART_EBR opt_geom.h 119GEOM_PART_EBR_COMPAT opt_geom.h 120GEOM_PART_GPT opt_geom.h 121GEOM_PART_LDM opt_geom.h 122GEOM_PART_MBR opt_geom.h 123GEOM_PART_PC98 opt_geom.h 124GEOM_PART_VTOC8 opt_geom.h 125GEOM_PC98 opt_geom.h 126GEOM_RAID opt_geom.h 127GEOM_RAID3 opt_geom.h 128GEOM_SHSEC opt_geom.h 129GEOM_STRIPE opt_geom.h 130GEOM_SUNLABEL opt_geom.h 131GEOM_UNCOMPRESS opt_geom.h 132GEOM_UZIP opt_geom.h 133GEOM_VINUM opt_geom.h 134GEOM_VIRSTOR opt_geom.h 135GEOM_VOL opt_geom.h 136GEOM_ZERO opt_geom.h 137KDTRACE_HOOKS opt_global.h 138KDTRACE_FRAME opt_kdtrace.h 139KN_HASHSIZE opt_kqueue.h 140KSTACK_MAX_PAGES 141KSTACK_PAGES 142KSTACK_USAGE_PROF 143KTRACE 144KTRACE_REQUEST_POOL opt_ktrace.h 145LIBICONV 146MAC opt_global.h 147MAC_BIBA opt_dontuse.h 148MAC_BSDEXTENDED opt_dontuse.h 149MAC_IFOFF opt_dontuse.h 150MAC_LOMAC opt_dontuse.h 151MAC_MLS opt_dontuse.h 152MAC_NONE opt_dontuse.h 153MAC_PARTITION opt_dontuse.h 154MAC_PORTACL opt_dontuse.h 155MAC_SEEOTHERUIDS opt_dontuse.h 156MAC_STATIC opt_mac.h 157MAC_STUB opt_dontuse.h 158MAC_TEST opt_dontuse.h 159MD_ROOT opt_md.h 160MD_ROOT_FSTYPE opt_md.h 161MD_ROOT_SIZE opt_md.h 162MFI_DEBUG opt_mfi.h 163MFI_DECODE_LOG opt_mfi.h 164MPROF_BUFFERS opt_mprof.h 165MPROF_HASH_SIZE opt_mprof.h 166NEW_PCIB opt_global.h 167NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 168NO_ADAPTIVE_RWLOCKS 169NO_ADAPTIVE_SX 170NO_EVENTTIMERS opt_timer.h 171NO_SYSCTL_DESCR opt_global.h 172NSWBUF_MIN opt_swap.h 173MBUF_PACKET_ZONE_DISABLE opt_global.h 174PANIC_REBOOT_WAIT_TIME opt_panic.h 175PPC_DEBUG opt_ppc.h 176PPC_PROBE_CHIPSET opt_ppc.h 177PPS_SYNC opt_ntp.h 178PREEMPTION opt_sched.h 179QUOTA 180SCHED_4BSD opt_sched.h 181SCHED_STATS opt_sched.h 182SCHED_ULE opt_sched.h 183SLEEPQUEUE_PROFILING 184SLHCI_DEBUG opt_slhci.h 185SPX_HACK 186STACK opt_stack.h 187SUIDDIR 188MSGMNB opt_sysvipc.h 189MSGMNI opt_sysvipc.h 190MSGSEG opt_sysvipc.h 191MSGSSZ opt_sysvipc.h 192MSGTQL opt_sysvipc.h 193SEMMNI opt_sysvipc.h 194SEMMNS opt_sysvipc.h 195SEMMNU opt_sysvipc.h 196SEMMSL opt_sysvipc.h 197SEMOPM opt_sysvipc.h 198SEMUME opt_sysvipc.h 199SHMALL opt_sysvipc.h 200SHMMAX opt_sysvipc.h 201SHMMAXPGS opt_sysvipc.h 202SHMMIN opt_sysvipc.h 203SHMMNI opt_sysvipc.h 204SHMSEG opt_sysvipc.h 205SYSVMSG opt_sysvipc.h 206SYSVSEM opt_sysvipc.h 207SYSVSHM opt_sysvipc.h 208SW_WATCHDOG opt_watchdog.h 209TURNSTILE_PROFILING 210UMTX_PROFILING 211VFS_AIO 212VERBOSE_SYSINIT opt_global.h 213WLCACHE opt_wavelan.h 214WLDEBUG opt_wavelan.h 215 216# POSIX kernel options 217P1003_1B_MQUEUE opt_posix.h 218P1003_1B_SEMAPHORES opt_posix.h 219_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 220 221# Do we want the config file compiled into the kernel? 222INCLUDE_CONFIG_FILE opt_config.h 223 224# Options for static filesystems. These should only be used at config 225# time, since the corresponding lkms cannot work if there are any static 226# dependencies. Unusability is enforced by hiding the defines for the 227# options in a never-included header. 228AUTOFS opt_dontuse.h 229CD9660 opt_dontuse.h 230EXT2FS opt_dontuse.h 231FDESCFS opt_dontuse.h 232FFS opt_dontuse.h 233FUSE opt_dontuse.h 234MSDOSFS opt_dontuse.h 235NANDFS opt_dontuse.h 236NULLFS opt_dontuse.h 237PROCFS opt_dontuse.h 238PSEUDOFS opt_dontuse.h 239REISERFS opt_dontuse.h 240SMBFS opt_dontuse.h 241TMPFS opt_dontuse.h 242UDF opt_dontuse.h 243UNIONFS opt_dontuse.h 244ZFS opt_dontuse.h 245 246# Pseudofs debugging 247PSEUDOFS_TRACE opt_pseudofs.h 248 249# In-kernel GSS-API 250KGSSAPI opt_kgssapi.h 251KGSSAPI_DEBUG opt_kgssapi.h 252 253# These static filesystems have one slightly bogus static dependency in 254# sys/i386/i386/autoconf.c. If any of these filesystems are 255# statically compiled into the kernel, code for mounting them as root 256# filesystems will be enabled - but look below. 257# NFSCL - client 258# NFSD - server 259NFSCL opt_nfs.h 260NFSD opt_nfs.h 261 262# filesystems and libiconv bridge 263CD9660_ICONV opt_dontuse.h 264MSDOSFS_ICONV opt_dontuse.h 265UDF_ICONV opt_dontuse.h 266 267# If you are following the conditions in the copyright, 268# you can enable soft-updates which will speed up a lot of thigs 269# and make the system safer from crashes at the same time. 270# otherwise a STUB module will be compiled in. 271SOFTUPDATES opt_ffs.h 272 273# On small, embedded systems, it can be useful to turn off support for 274# snapshots. It saves about 30-40k for a feature that would be lightly 275# used, if it is used at all. 276NO_FFS_SNAPSHOT opt_ffs.h 277 278# Enabling this option turns on support for Access Control Lists in UFS, 279# which can be used to support high security configurations. Depends on 280# UFS_EXTATTR. 281UFS_ACL opt_ufs.h 282 283# Enabling this option turns on support for extended attributes in UFS-based 284# filesystems, which can be used to support high security configurations 285# as well as new filesystem features. 286UFS_EXTATTR opt_ufs.h 287UFS_EXTATTR_AUTOSTART opt_ufs.h 288 289# Enable fast hash lookups for large directories on UFS-based filesystems. 290UFS_DIRHASH opt_ufs.h 291 292# Enable gjournal-based UFS journal. 293UFS_GJOURNAL opt_ufs.h 294 295# The below sentence is not in English, and neither is this one. 296# We plan to remove the static dependences above, with a 297# <filesystem>_ROOT option to control if it usable as root. This list 298# allows these options to be present in config files already (though 299# they won't make any difference yet). 300NFS_ROOT opt_nfsroot.h 301 302# SMB/CIFS requester 303NETSMB opt_netsmb.h 304 305# Options used only in subr_param.c. 306HZ opt_param.h 307MAXFILES opt_param.h 308NBUF opt_param.h 309NSFBUFS opt_param.h 310VM_BCACHE_SIZE_MAX opt_param.h 311VM_SWZONE_SIZE_MAX opt_param.h 312MAXUSERS 313DFLDSIZ opt_param.h 314MAXDSIZ opt_param.h 315MAXSSIZ opt_param.h 316 317# Generic SCSI options. 318CAM_MAX_HIGHPOWER opt_cam.h 319CAMDEBUG opt_cam.h 320CAM_DEBUG_COMPILE opt_cam.h 321CAM_DEBUG_DELAY opt_cam.h 322CAM_DEBUG_BUS opt_cam.h 323CAM_DEBUG_TARGET opt_cam.h 324CAM_DEBUG_LUN opt_cam.h 325CAM_DEBUG_FLAGS opt_cam.h 326CAM_BOOT_DELAY opt_cam.h 327SCSI_DELAY opt_scsi.h 328SCSI_NO_SENSE_STRINGS opt_scsi.h 329SCSI_NO_OP_STRINGS opt_scsi.h 330 331# Options used only in cam/ata/ata_da.c 332ADA_TEST_FAILURE opt_ada.h 333ATA_STATIC_ID opt_ada.h 334 335# Options used only in cam/scsi/scsi_cd.c 336CHANGER_MIN_BUSY_SECONDS opt_cd.h 337CHANGER_MAX_BUSY_SECONDS opt_cd.h 338 339# Options used only in cam/scsi/scsi_sa.c. 340SA_IO_TIMEOUT opt_sa.h 341SA_SPACE_TIMEOUT opt_sa.h 342SA_REWIND_TIMEOUT opt_sa.h 343SA_ERASE_TIMEOUT opt_sa.h 344SA_1FM_AT_EOD opt_sa.h 345 346# Options used only in cam/scsi/scsi_pt.c 347SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 348 349# Options used only in cam/scsi/scsi_ses.c 350SES_ENABLE_PASSTHROUGH opt_ses.h 351 352# Options used in dev/sym/ (Symbios SCSI driver). 353SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 354 # Allows the ncr to take precedence 355 # 1 (1<<0) -> 810a, 860 356 # 2 (1<<1) -> 825a, 875, 885, 895 357 # 4 (1<<2) -> 895a, 896, 1510d 358SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 359 # disabled:0 (default), enabled:1 360SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 361 # disabled:0, enabled:1 (default) 362SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 363 # default:8, range:[1..64] 364 365# Options used only in dev/ncr/* 366SCSI_NCR_DEBUG opt_ncr.h 367SCSI_NCR_MAX_SYNC opt_ncr.h 368SCSI_NCR_MAX_WIDE opt_ncr.h 369SCSI_NCR_MYADDR opt_ncr.h 370 371# Options used only in dev/isp/* 372ISP_TARGET_MODE opt_isp.h 373ISP_FW_CRASH_DUMP opt_isp.h 374ISP_DEFAULT_ROLES opt_isp.h 375ISP_INTERNAL_TARGET opt_isp.h 376 377# Options used only in dev/iscsi 378ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 379 380# Net stuff. 381ACCEPT_FILTER_DATA 382ACCEPT_FILTER_DNS 383ACCEPT_FILTER_HTTP 384ALTQ opt_global.h 385ALTQ_CBQ opt_altq.h 386ALTQ_CDNR opt_altq.h 387ALTQ_DEBUG opt_altq.h 388ALTQ_HFSC opt_altq.h 389ALTQ_NOPCC opt_altq.h 390ALTQ_PRIQ opt_altq.h 391ALTQ_RED opt_altq.h 392ALTQ_RIO opt_altq.h 393BOOTP opt_bootp.h 394BOOTP_BLOCKSIZE opt_bootp.h 395BOOTP_COMPAT opt_bootp.h 396BOOTP_NFSROOT opt_bootp.h 397BOOTP_NFSV3 opt_bootp.h 398BOOTP_WIRED_TO opt_bootp.h 399DEVICE_POLLING 400DUMMYNET opt_ipdn.h 401INET opt_inet.h 402INET6 opt_inet6.h 403IPDIVERT 404IPFILTER opt_ipfilter.h 405IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 406IPFILTER_LOG opt_ipfilter.h 407IPFILTER_LOOKUP opt_ipfilter.h 408IPFIREWALL opt_ipfw.h 409IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 410IPFIREWALL_NAT opt_ipfw.h 411IPFIREWALL_VERBOSE opt_ipfw.h 412IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 413IPSEC opt_ipsec.h 414IPSEC_DEBUG opt_ipsec.h 415IPSEC_FILTERTUNNEL opt_ipsec.h 416IPSEC_NAT_T opt_ipsec.h 417IPSTEALTH 418KRPC 419LIBALIAS 420LIBMBPOOL 421LIBMCHAIN 422MBUF_PROFILING 423MBUF_STRESS_TEST 424MROUTING opt_mrouting.h 425NFSLOCKD 426PCBGROUP opt_pcbgroup.h 427PF_DEFAULT_TO_DROP opt_pf.h 428RADIX_MPATH opt_mpath.h 429ROUTETABLES opt_route.h 430RSS opt_rss.h 431SLIP_IFF_OPTS opt_slip.h 432TCPDEBUG 433TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading 434TCP_SIGNATURE opt_inet.h 435VLAN_ARRAY opt_vlan.h 436XBONEHACK 437FLOWTABLE opt_route.h 438FLOWTABLE_HASH_ALL opt_route.h 439 440# 441# SCTP 442# 443SCTP opt_sctp.h 444SCTP_DEBUG opt_sctp.h # Enable debug printfs 445SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril 446SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 447SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 448SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 449SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 450SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 451SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 452SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 453SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 454SCTP_LOCAL_TRACE_BUF opt_sctp.h # Use tracebuffer exported via sysctl 455SCTP_DETAILED_STR_STATS opt_sctp.h # Use per PR-SCTP policy stream stats 456# 457# 458# 459 460# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 461# Each netgraph node type can be either be compiled into the kernel 462# or loaded dynamically. To get the former, include the corresponding 463# option below. Each type has its own man page, e.g. ng_async(4). 464NETGRAPH 465NETGRAPH_DEBUG opt_netgraph.h 466NETGRAPH_ASYNC opt_netgraph.h 467NETGRAPH_ATMLLC opt_netgraph.h 468NETGRAPH_ATM_ATMPIF opt_netgraph.h 469NETGRAPH_BLUETOOTH opt_netgraph.h 470NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 471NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 472NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 473NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 474NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 475NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 476NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 477NETGRAPH_BPF opt_netgraph.h 478NETGRAPH_BRIDGE opt_netgraph.h 479NETGRAPH_CAR opt_netgraph.h 480NETGRAPH_CISCO opt_netgraph.h 481NETGRAPH_DEFLATE opt_netgraph.h 482NETGRAPH_DEVICE opt_netgraph.h 483NETGRAPH_ECHO opt_netgraph.h 484NETGRAPH_EIFACE opt_netgraph.h 485NETGRAPH_ETHER opt_netgraph.h 486NETGRAPH_ETHER_ECHO opt_netgraph.h 487NETGRAPH_FEC opt_netgraph.h 488NETGRAPH_FRAME_RELAY opt_netgraph.h 489NETGRAPH_GIF opt_netgraph.h 490NETGRAPH_GIF_DEMUX opt_netgraph.h 491NETGRAPH_HOLE opt_netgraph.h 492NETGRAPH_IFACE opt_netgraph.h 493NETGRAPH_IP_INPUT opt_netgraph.h 494NETGRAPH_IPFW opt_netgraph.h 495NETGRAPH_KSOCKET opt_netgraph.h 496NETGRAPH_L2TP opt_netgraph.h 497NETGRAPH_LMI opt_netgraph.h 498# MPPC compression requires proprietary files (not included) 499NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 500NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 501NETGRAPH_NAT opt_netgraph.h 502NETGRAPH_NETFLOW opt_netgraph.h 503NETGRAPH_ONE2MANY opt_netgraph.h 504NETGRAPH_PATCH opt_netgraph.h 505NETGRAPH_PIPE opt_netgraph.h 506NETGRAPH_PPP opt_netgraph.h 507NETGRAPH_PPPOE opt_netgraph.h 508NETGRAPH_PPTPGRE opt_netgraph.h 509NETGRAPH_PRED1 opt_netgraph.h 510NETGRAPH_RFC1490 opt_netgraph.h 511NETGRAPH_SOCKET opt_netgraph.h 512NETGRAPH_SPLIT opt_netgraph.h 513NETGRAPH_SPPP opt_netgraph.h 514NETGRAPH_TAG opt_netgraph.h 515NETGRAPH_TCPMSS opt_netgraph.h 516NETGRAPH_TEE opt_netgraph.h 517NETGRAPH_TTY opt_netgraph.h 518NETGRAPH_UI opt_netgraph.h 519NETGRAPH_VJC opt_netgraph.h 520NETGRAPH_VLAN opt_netgraph.h 521 522# NgATM options 523NGATM_ATM opt_netgraph.h 524NGATM_ATMBASE opt_netgraph.h 525NGATM_SSCOP opt_netgraph.h 526NGATM_SSCFU opt_netgraph.h 527NGATM_UNI opt_netgraph.h 528NGATM_CCATM opt_netgraph.h 529 530# DRM options 531DRM_DEBUG opt_drm.h 532 533TI_SF_BUF_JUMBO opt_ti.h 534TI_JUMBO_HDRSPLIT opt_ti.h 535 536# XXX Conflict: # of devices vs network protocol (Native ATM). 537# This makes "atm.h" unusable. 538NATM 539 540# DPT driver debug flags 541DPT_MEASURE_PERFORMANCE opt_dpt.h 542DPT_RESET_HBA opt_dpt.h 543 544# Misc debug flags. Most of these should probably be replaced with 545# 'DEBUG', and then let people recompile just the interesting modules 546# with 'make CC="cc -DDEBUG"'. 547CLUSTERDEBUG opt_debug_cluster.h 548DEBUG_1284 opt_ppb_1284.h 549VP0_DEBUG opt_vpo.h 550LPT_DEBUG opt_lpt.h 551PLIP_DEBUG opt_plip.h 552LOCKF_DEBUG opt_debug_lockf.h 553SI_DEBUG opt_debug_si.h 554 555# Fb options 556FB_DEBUG opt_fb.h 557FB_INSTALL_CDEV opt_fb.h 558 559# ppbus related options 560PERIPH_1284 opt_ppb_1284.h 561DONTPROBE_1284 opt_ppb_1284.h 562 563# smbus related options 564ENABLE_ALART opt_intpm.h 565 566# These cause changes all over the kernel 567BLKDEV_IOSIZE opt_global.h 568BURN_BRIDGES opt_global.h 569DEBUG opt_global.h 570DEBUG_LOCKS opt_global.h 571DEBUG_VFS_LOCKS opt_global.h 572DFLTPHYS opt_global.h 573DIAGNOSTIC opt_global.h 574INVARIANT_SUPPORT opt_global.h 575INVARIANTS opt_global.h 576MAXCPU opt_global.h 577MAXMEMDOM opt_global.h 578MAXPHYS opt_global.h 579MCLSHIFT opt_global.h 580MUTEX_DEBUG opt_global.h 581MUTEX_NOINLINE opt_global.h 582LOCK_PROFILING opt_global.h 583LOCK_PROFILING_FAST opt_global.h 584MSIZE opt_global.h 585REGRESSION opt_global.h 586RWLOCK_NOINLINE opt_global.h 587SX_NOINLINE opt_global.h 588VFS_BIO_DEBUG opt_global.h 589 590# These are VM related options 591VM_KMEM_SIZE opt_vm.h 592VM_KMEM_SIZE_SCALE opt_vm.h 593VM_KMEM_SIZE_MAX opt_vm.h 594VM_NRESERVLEVEL opt_vm.h 595VM_LEVEL_0_ORDER opt_vm.h 596NO_SWAPPING opt_vm.h 597MALLOC_MAKE_FAILURES opt_vm.h 598MALLOC_PROFILE opt_vm.h 599MALLOC_DEBUG_MAXZONES opt_vm.h 600 601# The MemGuard replacement allocator used for tamper-after-free detection 602DEBUG_MEMGUARD opt_vm.h 603 604# The RedZone malloc(9) protection 605DEBUG_REDZONE opt_vm.h 606 607# Standard SMP options 608SMP opt_global.h 609 610# Size of the kernel message buffer 611MSGBUF_SIZE opt_msgbuf.h 612 613# NFS options 614NFS_MINATTRTIMO opt_nfs.h 615NFS_MAXATTRTIMO opt_nfs.h 616NFS_MINDIRATTRTIMO opt_nfs.h 617NFS_MAXDIRATTRTIMO opt_nfs.h 618NFS_DEBUG opt_nfs.h 619 620# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 621OVERRIDE_CARD opt_bktr.h 622OVERRIDE_TUNER opt_bktr.h 623OVERRIDE_DBX opt_bktr.h 624OVERRIDE_MSP opt_bktr.h 625BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 626BROOKTREE_ALLOC_PAGES opt_bktr.h 627BKTR_OVERRIDE_CARD opt_bktr.h 628BKTR_OVERRIDE_TUNER opt_bktr.h 629BKTR_OVERRIDE_DBX opt_bktr.h 630BKTR_OVERRIDE_MSP opt_bktr.h 631BKTR_SYSTEM_DEFAULT opt_bktr.h 632BKTR_ALLOC_PAGES opt_bktr.h 633BKTR_USE_PLL opt_bktr.h 634BKTR_GPIO_ACCESS opt_bktr.h 635BKTR_NO_MSP_RESET opt_bktr.h 636BKTR_430_FX_MODE opt_bktr.h 637BKTR_SIS_VIA_MODE opt_bktr.h 638BKTR_USE_FREEBSD_SMBUS opt_bktr.h 639BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 640 641# Options for uart(4) 642UART_PPS_ON_CTS opt_uart.h 643UART_POLL_FREQ opt_uart.h 644 645# options for bus/device framework 646BUS_DEBUG opt_bus.h 647 648# options for USB support 649USB_DEBUG opt_usb.h 650USB_HOST_ALIGN opt_usb.h 651USB_REQ_DEBUG opt_usb.h 652USB_TEMPLATE opt_usb.h 653USB_VERBOSE opt_usb.h 654USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 655U3G_DEBUG opt_u3g.h 656UKBD_DFLT_KEYMAP opt_ukbd.h 657UPLCOM_INTR_INTERVAL opt_uplcom.h 658UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 659UVSCOM_INTR_INTERVAL opt_uvscom.h 660 661# Embedded system options 662INIT_PATH 663 664ROOTDEVNAME 665 666FDC_DEBUG opt_fdc.h 667PCFCLOCK_VERBOSE opt_pcfclock.h 668PCFCLOCK_MAX_RETRIES opt_pcfclock.h 669 670KTR opt_global.h 671KTR_ALQ opt_ktr.h 672KTR_MASK opt_ktr.h 673KTR_CPUMASK opt_ktr.h 674KTR_COMPILE opt_global.h 675KTR_BOOT_ENTRIES opt_global.h 676KTR_ENTRIES opt_global.h 677KTR_VERBOSE opt_ktr.h 678WITNESS opt_global.h 679WITNESS_KDB opt_witness.h 680WITNESS_NO_VNODE opt_witness.h 681WITNESS_SKIPSPIN opt_witness.h 682WITNESS_COUNT opt_witness.h 683OPENSOLARIS_WITNESS opt_global.h 684 685# options for ACPI support 686ACPI_DEBUG opt_acpi.h 687ACPI_MAX_TASKS opt_acpi.h 688ACPI_MAX_THREADS opt_acpi.h 689ACPI_DMAR opt_acpi.h 690 691# ISA support 692DEV_ISA opt_isa.h 693ISAPNP opt_isa.h 694 695# various 'device presence' options. 696DEV_BPF opt_bpf.h 697DEV_CARP opt_carp.h 698DEV_ENC opt_enc.h 699DEV_MCA opt_mca.h 700DEV_NETMAP opt_global.h 701DEV_PCI opt_pci.h 702DEV_PF opt_pf.h 703DEV_PFLOG opt_pf.h 704DEV_PFSYNC opt_pf.h 705DEV_SPLASH opt_splash.h 706DEV_VLAN opt_vlan.h 707 708# EISA support 709DEV_EISA opt_eisa.h 710EISA_SLOTS opt_eisa.h 711 712# ed driver 713ED_HPP opt_ed.h 714ED_3C503 opt_ed.h 715ED_SIC opt_ed.h 716 717# bce driver 718BCE_DEBUG opt_bce.h 719BCE_NVRAM_WRITE_SUPPORT opt_bce.h 720 721SOCKBUF_DEBUG opt_global.h 722 723 724# options for ubsec driver 725UBSEC_DEBUG opt_ubsec.h 726UBSEC_RNDTEST opt_ubsec.h 727UBSEC_NO_RNG opt_ubsec.h 728 729# options for hifn driver 730HIFN_DEBUG opt_hifn.h 731HIFN_RNDTEST opt_hifn.h 732 733# options for safenet driver 734SAFE_DEBUG opt_safe.h 735SAFE_NO_RNG opt_safe.h 736SAFE_RNDTEST opt_safe.h 737 738# syscons/vt options 739MAXCONS opt_syscons.h 740SC_ALT_MOUSE_IMAGE opt_syscons.h 741SC_CUT_SPACES2TABS opt_syscons.h 742SC_CUT_SEPCHARS opt_syscons.h 743SC_DEBUG_LEVEL opt_syscons.h 744SC_DFLT_FONT opt_syscons.h 745SC_DISABLE_KDBKEY opt_syscons.h 746SC_DISABLE_REBOOT opt_syscons.h 747SC_HISTORY_SIZE opt_syscons.h 748SC_KERNEL_CONS_ATTR opt_syscons.h 749SC_KERNEL_CONS_REV_ATTR opt_syscons.h 750SC_MOUSE_CHAR opt_syscons.h 751SC_NO_CUTPASTE opt_syscons.h 752SC_NO_FONT_LOADING opt_syscons.h 753SC_NO_HISTORY opt_syscons.h 754SC_NO_MODE_CHANGE opt_syscons.h 755SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 756SC_NO_SYSMOUSE opt_syscons.h 757SC_NORM_ATTR opt_syscons.h 758SC_NORM_REV_ATTR opt_syscons.h 759SC_PIXEL_MODE opt_syscons.h 760SC_RENDER_DEBUG opt_syscons.h 761SC_TWOBUTTON_MOUSE opt_syscons.h 762VT_ALT_TO_ESC_HACK opt_syscons.h 763VT_FB_DEFAULT_WIDTH opt_syscons.h 764VT_FB_DEFAULT_HEIGHT opt_syscons.h 765VT_MAXWINDOWS opt_syscons.h 766VT_TWOBUTTON_MOUSE opt_syscons.h 767DEV_SC opt_syscons.h 768DEV_VT opt_syscons.h 769 770# teken terminal emulator options 771TEKEN_CONS25 opt_teken.h 772TEKEN_UTF8 opt_teken.h 773TERMINAL_KERN_ATTR opt_teken.h 774TERMINAL_NORM_ATTR opt_teken.h 775 776# options for printf 777PRINTF_BUFR_SIZE opt_printf.h 778 779# kbd options 780KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 781KBD_INSTALL_CDEV opt_kbd.h 782KBD_MAXRETRY opt_kbd.h 783KBD_MAXWAIT opt_kbd.h 784KBD_RESETDELAY opt_kbd.h 785KBDIO_DEBUG opt_kbd.h 786 787# options for the Atheros driver 788ATH_DEBUG opt_ath.h 789ATH_TXBUF opt_ath.h 790ATH_RXBUF opt_ath.h 791ATH_DIAGAPI opt_ath.h 792ATH_TX99_DIAG opt_ath.h 793ATH_ENABLE_11N opt_ath.h 794ATH_ENABLE_DFS opt_ath.h 795ATH_EEPROM_FIRMWARE opt_ath.h 796ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 797ATH_DEBUG_ALQ opt_ath.h 798ATH_KTR_INTR_DEBUG opt_ath.h 799 800# options for the Atheros hal 801AH_SUPPORT_AR5416 opt_ah.h 802# XXX For now, this breaks non-AR9130 chipsets, so only use it 803# XXX when actually targetting AR9130. 804AH_SUPPORT_AR9130 opt_ah.h 805 806# This is required for AR933x SoC support 807AH_SUPPORT_AR9330 opt_ah.h 808AH_SUPPORT_AR9340 opt_ah.h 809AH_SUPPORT_QCA9550 opt_ah.h 810 811AH_DEBUG opt_ah.h 812AH_ASSERT opt_ah.h 813AH_DEBUG_ALQ opt_ah.h 814AH_REGOPS_FUNC opt_ah.h 815AH_WRITE_REGDOMAIN opt_ah.h 816AH_DEBUG_COUNTRY opt_ah.h 817AH_WRITE_EEPROM opt_ah.h 818AH_PRIVATE_DIAG opt_ah.h 819AH_NEED_DESC_SWAP opt_ah.h 820AH_USE_INIPDGAIN opt_ah.h 821AH_MAXCHAN opt_ah.h 822AH_RXCFG_SDMAMW_4BYTES opt_ah.h 823AH_INTERRUPT_DEBUGGING opt_ah.h 824# AR5416 and later interrupt mitigation 825# XXX do not use this for AR9130 826AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 827 828# options for the Broadcom BCM43xx driver (bwi) 829BWI_DEBUG opt_bwi.h 830BWI_DEBUG_VERBOSE opt_bwi.h 831 832# options for the Marvell 8335 wireless driver 833MALO_DEBUG opt_malo.h 834MALO_TXBUF opt_malo.h 835MALO_RXBUF opt_malo.h 836 837# options for the Marvell wireless driver 838MWL_DEBUG opt_mwl.h 839MWL_TXBUF opt_mwl.h 840MWL_RXBUF opt_mwl.h 841MWL_DIAGAPI opt_mwl.h 842MWL_AGGR_SIZE opt_mwl.h 843MWL_TX_NODROP opt_mwl.h 844 845# Options for the Intel 802.11n wireless driver 846IWN_DEBUG opt_iwn.h 847 848# dcons options 849DCONS_BUF_SIZE opt_dcons.h 850DCONS_POLL_HZ opt_dcons.h 851DCONS_FORCE_CONSOLE opt_dcons.h 852DCONS_FORCE_GDB opt_dcons.h 853 854# HWPMC options 855HWPMC_HOOKS 856HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h 857 858# XBOX options for FreeBSD/i386, but some files are MI 859XBOX opt_xbox.h 860 861# Interrupt filtering 862INTR_FILTER 863 864# 802.11 support layer 865IEEE80211_DEBUG opt_wlan.h 866IEEE80211_DEBUG_REFCNT opt_wlan.h 867IEEE80211_AMPDU_AGE opt_wlan.h 868IEEE80211_SUPPORT_MESH opt_wlan.h 869IEEE80211_SUPPORT_SUPERG opt_wlan.h 870IEEE80211_SUPPORT_TDMA opt_wlan.h 871IEEE80211_ALQ opt_wlan.h 872IEEE80211_DFS_DEBUG opt_wlan.h 873 874# 802.11 TDMA support 875TDMA_SLOTLEN_DEFAULT opt_tdma.h 876TDMA_SLOTCNT_DEFAULT opt_tdma.h 877TDMA_BINTVAL_DEFAULT opt_tdma.h 878TDMA_TXRATE_11B_DEFAULT opt_tdma.h 879TDMA_TXRATE_11G_DEFAULT opt_tdma.h 880TDMA_TXRATE_11A_DEFAULT opt_tdma.h 881TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 882TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 883TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 884TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 885TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 886 887# Network stack virtualization options 888VIMAGE opt_global.h 889VNET_DEBUG opt_global.h 890 891# Common Flash Interface (CFI) options 892CFI_SUPPORT_STRATAFLASH opt_cfi.h 893CFI_ARMEDANDDANGEROUS opt_cfi.h 894 895# Sound options 896SND_DEBUG opt_snd.h 897SND_DIAGNOSTIC opt_snd.h 898SND_FEEDER_MULTIFORMAT opt_snd.h 899SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 900SND_FEEDER_RATE_HP opt_snd.h 901SND_PCM_64 opt_snd.h 902SND_OLDSTEREO opt_snd.h 903 904X86BIOS 905 906# Flattened device tree options 907FDT opt_platform.h 908FDT_DTB_STATIC opt_platform.h 909 910# OFED Infiniband stack 911OFED opt_ofed.h 912OFED_DEBUG_INIT opt_ofed.h 913SDP opt_ofed.h 914SDP_DEBUG opt_ofed.h 915IPOIB opt_ofed.h 916IPOIB_DEBUG opt_ofed.h 917IPOIB_CM opt_ofed.h 918 919# Resource Accounting 920RACCT opt_global.h 921 922# Resource Limits 923RCTL opt_global.h 924 925# Random number generator(s) 926RANDOM_YARROW opt_random.h 927RANDOM_FORTUNA opt_random.h 928RANDOM_DEBUG opt_random.h 929