1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affects only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AHC_ALLOW_MEMIO opt_aic7xxx.h 35AHC_TMODE_ENABLE opt_aic7xxx.h 36AHC_DUMP_EEPROM opt_aic7xxx.h 37AHC_DEBUG opt_aic7xxx.h 38AHC_DEBUG_OPTS opt_aic7xxx.h 39AHC_REG_PRETTY_PRINT opt_aic7xxx.h 40AHD_DEBUG opt_aic79xx.h 41AHD_DEBUG_OPTS opt_aic79xx.h 42AHD_TMODE_ENABLE opt_aic79xx.h 43AHD_REG_PRETTY_PRINT opt_aic79xx.h 44ADW_ALLOW_MEMIO opt_adw.h 45 46TWA_DEBUG opt_twa.h 47TWA_FLASH_FIRMWARE opt_twa.h 48 49# Debugging options. 50ALT_BREAK_TO_DEBUGGER opt_kdb.h 51BREAK_TO_DEBUGGER opt_kdb.h 52DDB 53DDB_BUFR_SIZE opt_ddb.h 54DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 55DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 56DDB_CTF opt_ddb.h 57DDB_NUMSYM opt_ddb.h 58GDB 59KDB opt_global.h 60KDB_TRACE opt_kdb.h 61KDB_UNATTENDED opt_kdb.h 62KLD_DEBUG opt_kld.h 63SYSCTL_DEBUG opt_sysctl.h 64 65# Miscellaneous options. 66ADAPTIVE_LOCKMGRS 67ALQ 68AUDIT opt_global.h 69CAPABILITIES opt_capsicum.h 70CAPABILITY_MODE opt_capsicum.h 71COMPAT_43 opt_compat.h 72COMPAT_43TTY opt_compat.h 73COMPAT_FREEBSD4 opt_compat.h 74COMPAT_FREEBSD5 opt_compat.h 75COMPAT_FREEBSD6 opt_compat.h 76COMPAT_FREEBSD7 opt_compat.h 77COMPILING_LINT opt_global.h 78COMPRESS_USER_CORES opt_core.h 79CY_PCI_FASTINTR 80DEADLKRES opt_watchdog.h 81DIRECTIO 82FFCLOCK 83FULL_PREEMPTION opt_sched.h 84IPI_PREEMPTION opt_sched.h 85GEOM_AES opt_geom.h 86GEOM_BDE opt_geom.h 87GEOM_BSD opt_geom.h 88GEOM_CACHE opt_geom.h 89GEOM_CONCAT opt_geom.h 90GEOM_ELI opt_geom.h 91GEOM_FOX opt_geom.h 92GEOM_GATE opt_geom.h 93GEOM_JOURNAL opt_geom.h 94GEOM_LABEL opt_geom.h 95GEOM_LINUX_LVM opt_geom.h 96GEOM_MBR opt_geom.h 97GEOM_MIRROR opt_geom.h 98GEOM_MULTIPATH opt_geom.h 99GEOM_NOP opt_geom.h 100GEOM_PART_APM opt_geom.h 101GEOM_PART_BSD opt_geom.h 102GEOM_PART_EBR opt_geom.h 103GEOM_PART_EBR_COMPAT opt_geom.h 104GEOM_PART_GPT opt_geom.h 105GEOM_PART_LDM opt_geom.h 106GEOM_PART_MBR opt_geom.h 107GEOM_PART_PC98 opt_geom.h 108GEOM_PART_VTOC8 opt_geom.h 109GEOM_PC98 opt_geom.h 110GEOM_RAID opt_geom.h 111GEOM_RAID3 opt_geom.h 112GEOM_SHSEC opt_geom.h 113GEOM_STRIPE opt_geom.h 114GEOM_SUNLABEL opt_geom.h 115GEOM_UNCOMPRESS opt_geom.h 116GEOM_UZIP opt_geom.h 117GEOM_VIRSTOR opt_geom.h 118GEOM_VOL opt_geom.h 119GEOM_ZERO opt_geom.h 120KDTRACE_HOOKS opt_kdtrace.h 121KSTACK_MAX_PAGES 122KSTACK_PAGES 123KTRACE 124KTRACE_REQUEST_POOL opt_ktrace.h 125LIBICONV 126MAC opt_global.h 127MAC_BIBA opt_dontuse.h 128MAC_BSDEXTENDED opt_dontuse.h 129MAC_IFOFF opt_dontuse.h 130MAC_LOMAC opt_dontuse.h 131MAC_MLS opt_dontuse.h 132MAC_NONE opt_dontuse.h 133MAC_PARTITION opt_dontuse.h 134MAC_PORTACL opt_dontuse.h 135MAC_SEEOTHERUIDS opt_dontuse.h 136MAC_STATIC opt_mac.h 137MAC_STUB opt_dontuse.h 138MAC_TEST opt_dontuse.h 139MD_ROOT opt_md.h 140MD_ROOT_SIZE opt_md.h 141MFI_DEBUG opt_mfi.h 142MFI_DECODE_LOG opt_mfi.h 143MPROF_BUFFERS opt_mprof.h 144MPROF_HASH_SIZE opt_mprof.h 145NEW_PCIB opt_global.h 146NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 147NO_ADAPTIVE_RWLOCKS 148NO_ADAPTIVE_SX 149NO_SYSCTL_DESCR opt_global.h 150NSWBUF_MIN opt_swap.h 151MBUF_PACKET_ZONE_DISABLE opt_global.h 152PANIC_REBOOT_WAIT_TIME opt_panic.h 153PPC_DEBUG opt_ppc.h 154PPC_PROBE_CHIPSET opt_ppc.h 155PPS_SYNC opt_ntp.h 156PREEMPTION opt_sched.h 157PROCDESC opt_procdesc.h 158QUOTA 159SCHED_4BSD opt_sched.h 160SCHED_STATS opt_sched.h 161SCHED_ULE opt_sched.h 162SLEEPQUEUE_PROFILING 163SLHCI_DEBUG opt_slhci.h 164SPX_HACK 165STACK opt_stack.h 166SUIDDIR 167MSGMNB opt_sysvipc.h 168MSGMNI opt_sysvipc.h 169MSGSEG opt_sysvipc.h 170MSGSSZ opt_sysvipc.h 171MSGTQL opt_sysvipc.h 172SEMMNI opt_sysvipc.h 173SEMMNS opt_sysvipc.h 174SEMMNU opt_sysvipc.h 175SEMMSL opt_sysvipc.h 176SEMOPM opt_sysvipc.h 177SEMUME opt_sysvipc.h 178SHMALL opt_sysvipc.h 179SHMMAX opt_sysvipc.h 180SHMMAXPGS opt_sysvipc.h 181SHMMIN opt_sysvipc.h 182SHMMNI opt_sysvipc.h 183SHMSEG opt_sysvipc.h 184SYSVMSG opt_sysvipc.h 185SYSVSEM opt_sysvipc.h 186SYSVSHM opt_sysvipc.h 187SW_WATCHDOG opt_watchdog.h 188TURNSTILE_PROFILING 189UMTX_PROFILING 190VFS_AIO 191VERBOSE_SYSINIT opt_global.h 192WLCACHE opt_wavelan.h 193WLDEBUG opt_wavelan.h 194 195# POSIX kernel options 196P1003_1B_MQUEUE opt_posix.h 197P1003_1B_SEMAPHORES opt_posix.h 198_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 199 200# Do we want the config file compiled into the kernel? 201INCLUDE_CONFIG_FILE opt_config.h 202 203# Options for static filesystems. These should only be used at config 204# time, since the corresponding lkms cannot work if there are any static 205# dependencies. Unusability is enforced by hiding the defines for the 206# options in a never-included header. 207CD9660 opt_dontuse.h 208EXT2FS opt_dontuse.h 209FDESCFS opt_dontuse.h 210FFS opt_dontuse.h 211FUSE opt_dontuse.h 212MSDOSFS opt_dontuse.h 213NANDFS opt_dontuse.h 214NULLFS opt_dontuse.h 215PROCFS opt_dontuse.h 216PSEUDOFS opt_dontuse.h 217REISERFS opt_dontuse.h 218TMPFS opt_dontuse.h 219UDF opt_dontuse.h 220UNIONFS opt_dontuse.h 221 222# Pseudofs debugging 223PSEUDOFS_TRACE opt_pseudofs.h 224 225# In-kernel GSS-API 226KGSSAPI opt_kgssapi.h 227KGSSAPI_DEBUG opt_kgssapi.h 228 229# These static filesystems have one slightly bogus static dependency in 230# sys/i386/i386/autoconf.c. If any of these filesystems are 231# statically compiled into the kernel, code for mounting them as root 232# filesystems will be enabled - but look below. 233NFSCLIENT opt_nfs.h 234NFSSERVER opt_nfs.h 235 236# Use these options to compile the experimental nfs client and/or 237# server that supports NFSv4 into a kernel. 238# NFSCL - client 239# NFSD - server 240NFSCL opt_nfs.h 241NFSD opt_nfs.h 242 243# filesystems and libiconv bridge 244CD9660_ICONV opt_dontuse.h 245MSDOSFS_ICONV opt_dontuse.h 246UDF_ICONV opt_dontuse.h 247 248# If you are following the conditions in the copyright, 249# you can enable soft-updates which will speed up a lot of thigs 250# and make the system safer from crashes at the same time. 251# otherwise a STUB module will be compiled in. 252SOFTUPDATES opt_ffs.h 253 254# On small, embedded systems, it can be useful to turn off support for 255# snapshots. It saves about 30-40k for a feature that would be lightly 256# used, if it is used at all. 257NO_FFS_SNAPSHOT opt_ffs.h 258 259# Enabling this option turns on support for Access Control Lists in UFS, 260# which can be used to support high security configurations. Depends on 261# UFS_EXTATTR. 262UFS_ACL opt_ufs.h 263 264# Enabling this option turns on support for extended attributes in UFS-based 265# filesystems, which can be used to support high security configurations 266# as well as new filesystem features. 267UFS_EXTATTR opt_ufs.h 268UFS_EXTATTR_AUTOSTART opt_ufs.h 269 270# Enable fast hash lookups for large directories on UFS-based filesystems. 271UFS_DIRHASH opt_ufs.h 272 273# Enable gjournal-based UFS journal. 274UFS_GJOURNAL opt_ufs.h 275 276# The below sentence is not in English, and neither is this one. 277# We plan to remove the static dependences above, with a 278# <filesystem>_ROOT option to control if it usable as root. This list 279# allows these options to be present in config files already (though 280# they won't make any difference yet). 281NFS_ROOT opt_nfsroot.h 282 283# Options used only in subr_param.c. 284HZ opt_param.h 285MAXFILES opt_param.h 286NBUF opt_param.h 287NSFBUFS opt_param.h 288VM_BCACHE_SIZE_MAX opt_param.h 289VM_SWZONE_SIZE_MAX opt_param.h 290MAXUSERS 291DFLDSIZ opt_param.h 292MAXDSIZ opt_param.h 293MAXSSIZ opt_param.h 294 295# Generic SCSI options. 296CAM_MAX_HIGHPOWER opt_cam.h 297CAMDEBUG opt_cam.h 298CAM_DEBUG_COMPILE opt_cam.h 299CAM_DEBUG_DELAY opt_cam.h 300CAM_DEBUG_BUS opt_cam.h 301CAM_DEBUG_TARGET opt_cam.h 302CAM_DEBUG_LUN opt_cam.h 303CAM_DEBUG_FLAGS opt_cam.h 304SCSI_DELAY opt_scsi.h 305SCSI_NO_SENSE_STRINGS opt_scsi.h 306SCSI_NO_OP_STRINGS opt_scsi.h 307 308# Options used only in cam/ata/ata_da.c 309ADA_TEST_FAILURE opt_ada.h 310 311# Options used only in cam/scsi/scsi_cd.c 312CHANGER_MIN_BUSY_SECONDS opt_cd.h 313CHANGER_MAX_BUSY_SECONDS opt_cd.h 314 315# Options used only in cam/scsi/scsi_sa.c. 316SA_IO_TIMEOUT opt_sa.h 317SA_SPACE_TIMEOUT opt_sa.h 318SA_REWIND_TIMEOUT opt_sa.h 319SA_ERASE_TIMEOUT opt_sa.h 320SA_1FM_AT_EOD opt_sa.h 321 322# Options used only in cam/scsi/scsi_pt.c 323SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 324 325# Options used only in cam/scsi/scsi_ses.c 326SES_ENABLE_PASSTHROUGH opt_ses.h 327 328# Options used in dev/sym/ (Symbios SCSI driver). 329SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 330 # Allows the ncr to take precedence 331 # 1 (1<<0) -> 810a, 860 332 # 2 (1<<1) -> 825a, 875, 885, 895 333 # 4 (1<<2) -> 895a, 896, 1510d 334SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 335 # disabled:0 (default), enabled:1 336SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 337 # disabled:0, enabled:1 (default) 338SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 339 # default:8, range:[1..64] 340 341# Options used only in pci/ncr.c 342SCSI_NCR_DEBUG opt_ncr.h 343SCSI_NCR_MAX_SYNC opt_ncr.h 344SCSI_NCR_MAX_WIDE opt_ncr.h 345SCSI_NCR_MYADDR opt_ncr.h 346 347# Options used only in dev/isp/* 348ISP_TARGET_MODE opt_isp.h 349ISP_FW_CRASH_DUMP opt_isp.h 350ISP_DEFAULT_ROLES opt_isp.h 351ISP_INTERNAL_TARGET opt_isp.h 352 353# Options used only in dev/iscsi 354ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 355 356# Options used in the 'ata' ATA/ATAPI driver 357ATA_STATIC_ID opt_ata.h 358ATA_NOPCI opt_ata.h 359ATA_REQUEST_TIMEOUT opt_ata.h 360ATA_CAM opt_ata.h 361 362# Net stuff. 363ACCEPT_FILTER_DATA 364ACCEPT_FILTER_DNS 365ACCEPT_FILTER_HTTP 366ALTQ opt_global.h 367ALTQ_CBQ opt_altq.h 368ALTQ_CDNR opt_altq.h 369ALTQ_DEBUG opt_altq.h 370ALTQ_HFSC opt_altq.h 371ALTQ_NOPCC opt_altq.h 372ALTQ_PRIQ opt_altq.h 373ALTQ_RED opt_altq.h 374ALTQ_RIO opt_altq.h 375BOOTP opt_bootp.h 376BOOTP_BLOCKSIZE opt_bootp.h 377BOOTP_COMPAT opt_bootp.h 378BOOTP_NFSROOT opt_bootp.h 379BOOTP_NFSV3 opt_bootp.h 380BOOTP_WIRED_TO opt_bootp.h 381DEVICE_POLLING 382DEV_ENC opt_enc.h 383DEV_PF opt_pf.h 384DEV_PFLOG opt_pf.h 385DEV_PFSYNC opt_pf.h 386DEV_VLAN opt_vlan.h 387DUMMYNET opt_ipdn.h 388ETHER_8022 opt_ef.h 389ETHER_8023 opt_ef.h 390ETHER_II opt_ef.h 391ETHER_SNAP opt_ef.h 392INET opt_inet.h 393INET6 opt_inet6.h 394IPDIVERT 395IPFILTER opt_ipfilter.h 396IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 397IPFILTER_LOG opt_ipfilter.h 398IPFILTER_LOOKUP opt_ipfilter.h 399IPFIREWALL opt_ipfw.h 400IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 401IPFIREWALL_FORWARD opt_ipfw.h 402IPFIREWALL_NAT opt_ipfw.h 403IPFIREWALL_VERBOSE opt_ipfw.h 404IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 405IPSEC opt_ipsec.h 406IPSEC_DEBUG opt_ipsec.h 407IPSEC_FILTERTUNNEL opt_ipsec.h 408IPSEC_NAT_T opt_ipsec.h 409IPSTEALTH 410IPX 411KRPC 412LIBALIAS 413LIBMBPOOL 414LIBMCHAIN 415MBUF_PROFILING 416MBUF_STRESS_TEST 417MROUTING opt_mrouting.h 418NETATALK opt_atalk.h 419NFSLOCKD 420PCBGROUP opt_pcbgroup.h 421PF_DEFAULT_TO_DROP opt_pf.h 422RADIX_MPATH opt_mpath.h 423ROUTETABLES opt_route.h 424SLIP_IFF_OPTS opt_slip.h 425TCPDEBUG 426TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading 427TCP_SIGNATURE opt_inet.h 428VLAN_ARRAY opt_vlan.h 429XBONEHACK 430FLOWTABLE opt_route.h 431 432# 433# SCTP 434# 435SCTP opt_sctp.h 436SCTP_DEBUG opt_sctp.h # Enable debug printfs 437SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril 438SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 439SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 440SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 441SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 442SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 443SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 444SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 445SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 446# 447# 448# 449 450# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 451# Each netgraph node type can be either be compiled into the kernel 452# or loaded dynamically. To get the former, include the corresponding 453# option below. Each type has its own man page, e.g. ng_async(4). 454NETGRAPH 455NETGRAPH_DEBUG opt_netgraph.h 456NETGRAPH_ASYNC opt_netgraph.h 457NETGRAPH_ATMLLC opt_netgraph.h 458NETGRAPH_ATM_ATMPIF opt_netgraph.h 459NETGRAPH_BLUETOOTH opt_netgraph.h 460NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 461NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 462NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 463NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 464NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 465NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 466NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 467NETGRAPH_BPF opt_netgraph.h 468NETGRAPH_BRIDGE opt_netgraph.h 469NETGRAPH_CAR opt_netgraph.h 470NETGRAPH_CISCO opt_netgraph.h 471NETGRAPH_DEFLATE opt_netgraph.h 472NETGRAPH_DEVICE opt_netgraph.h 473NETGRAPH_ECHO opt_netgraph.h 474NETGRAPH_EIFACE opt_netgraph.h 475NETGRAPH_ETHER opt_netgraph.h 476NETGRAPH_ETHER_ECHO opt_netgraph.h 477NETGRAPH_FEC opt_netgraph.h 478NETGRAPH_FRAME_RELAY opt_netgraph.h 479NETGRAPH_GIF opt_netgraph.h 480NETGRAPH_GIF_DEMUX opt_netgraph.h 481NETGRAPH_HOLE opt_netgraph.h 482NETGRAPH_IFACE opt_netgraph.h 483NETGRAPH_IP_INPUT opt_netgraph.h 484NETGRAPH_IPFW opt_netgraph.h 485NETGRAPH_KSOCKET opt_netgraph.h 486NETGRAPH_L2TP opt_netgraph.h 487NETGRAPH_LMI opt_netgraph.h 488# MPPC compression requires proprietary files (not included) 489NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 490NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 491NETGRAPH_NAT opt_netgraph.h 492NETGRAPH_NETFLOW opt_netgraph.h 493NETGRAPH_ONE2MANY opt_netgraph.h 494NETGRAPH_PATCH opt_netgraph.h 495NETGRAPH_PIPE opt_netgraph.h 496NETGRAPH_PPP opt_netgraph.h 497NETGRAPH_PPPOE opt_netgraph.h 498NETGRAPH_PPTPGRE opt_netgraph.h 499NETGRAPH_PRED1 opt_netgraph.h 500NETGRAPH_RFC1490 opt_netgraph.h 501NETGRAPH_SOCKET opt_netgraph.h 502NETGRAPH_SPLIT opt_netgraph.h 503NETGRAPH_SPPP opt_netgraph.h 504NETGRAPH_TAG opt_netgraph.h 505NETGRAPH_TCPMSS opt_netgraph.h 506NETGRAPH_TEE opt_netgraph.h 507NETGRAPH_TTY opt_netgraph.h 508NETGRAPH_UI opt_netgraph.h 509NETGRAPH_VJC opt_netgraph.h 510NETGRAPH_VLAN opt_netgraph.h 511 512# NgATM options 513NGATM_ATM opt_netgraph.h 514NGATM_ATMBASE opt_netgraph.h 515NGATM_SSCOP opt_netgraph.h 516NGATM_SSCFU opt_netgraph.h 517NGATM_UNI opt_netgraph.h 518NGATM_CCATM opt_netgraph.h 519 520# DRM options 521DRM_DEBUG opt_drm.h 522 523ZERO_COPY_SOCKETS opt_zero.h 524TI_SF_BUF_JUMBO opt_ti.h 525TI_JUMBO_HDRSPLIT opt_ti.h 526BCE_JUMBO_HDRSPLIT opt_bce.h 527 528# XXX Conflict: # of devices vs network protocol (Native ATM). 529# This makes "atm.h" unusable. 530NATM 531 532# DPT driver debug flags 533DPT_MEASURE_PERFORMANCE opt_dpt.h 534DPT_HANDLE_TIMEOUTS opt_dpt.h 535DPT_TIMEOUT_FACTOR opt_dpt.h 536DPT_LOST_IRQ opt_dpt.h 537DPT_RESET_HBA opt_dpt.h 538 539# Misc debug flags. Most of these should probably be replaced with 540# 'DEBUG', and then let people recompile just the interesting modules 541# with 'make CC="cc -DDEBUG"'. 542CLUSTERDEBUG opt_debug_cluster.h 543DEBUG_1284 opt_ppb_1284.h 544VP0_DEBUG opt_vpo.h 545LPT_DEBUG opt_lpt.h 546PLIP_DEBUG opt_plip.h 547LOCKF_DEBUG opt_debug_lockf.h 548NETATALKDEBUG opt_atalk.h 549SI_DEBUG opt_debug_si.h 550 551# Fb options 552FB_DEBUG opt_fb.h 553FB_INSTALL_CDEV opt_fb.h 554 555# ppbus related options 556PERIPH_1284 opt_ppb_1284.h 557DONTPROBE_1284 opt_ppb_1284.h 558 559# smbus related options 560ENABLE_ALART opt_intpm.h 561 562# These cause changes all over the kernel 563BLKDEV_IOSIZE opt_global.h 564BURN_BRIDGES opt_global.h 565DEBUG opt_global.h 566DEBUG_LOCKS opt_global.h 567DEBUG_VFS_LOCKS opt_global.h 568DFLTPHYS opt_global.h 569DIAGNOSTIC opt_global.h 570INVARIANT_SUPPORT opt_global.h 571INVARIANTS opt_global.h 572MAXCPU opt_global.h 573MAXPHYS opt_global.h 574MCLSHIFT opt_global.h 575MUTEX_DEBUG opt_global.h 576MUTEX_NOINLINE opt_global.h 577LOCK_PROFILING opt_global.h 578LOCK_PROFILING_FAST opt_global.h 579MSIZE opt_global.h 580REGRESSION opt_global.h 581RWLOCK_NOINLINE opt_global.h 582SX_NOINLINE opt_global.h 583VFS_BIO_DEBUG opt_global.h 584 585# These are VM related options 586VM_KMEM_SIZE opt_vm.h 587VM_KMEM_SIZE_SCALE opt_vm.h 588VM_KMEM_SIZE_MAX opt_vm.h 589VM_NRESERVLEVEL opt_vm.h 590VM_LEVEL_0_ORDER opt_vm.h 591NO_SWAPPING opt_vm.h 592MALLOC_MAKE_FAILURES opt_vm.h 593MALLOC_PROFILE opt_vm.h 594MALLOC_DEBUG_MAXZONES opt_vm.h 595 596# The MemGuard replacement allocator used for tamper-after-free detection 597DEBUG_MEMGUARD opt_vm.h 598 599# The RedZone malloc(9) protection 600DEBUG_REDZONE opt_vm.h 601 602# Standard SMP options 603SMP opt_global.h 604 605# Size of the kernel message buffer 606MSGBUF_SIZE opt_msgbuf.h 607 608# NFS options 609NFS_MINATTRTIMO opt_nfs.h 610NFS_MAXATTRTIMO opt_nfs.h 611NFS_MINDIRATTRTIMO opt_nfs.h 612NFS_MAXDIRATTRTIMO opt_nfs.h 613NFS_GATHERDELAY opt_nfs.h 614NFS_WDELAYHASHSIZ opt_nfs.h 615NFS_DEBUG opt_nfs.h 616 617# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 618OVERRIDE_CARD opt_bktr.h 619OVERRIDE_TUNER opt_bktr.h 620OVERRIDE_DBX opt_bktr.h 621OVERRIDE_MSP opt_bktr.h 622BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 623BROOKTREE_ALLOC_PAGES opt_bktr.h 624BKTR_OVERRIDE_CARD opt_bktr.h 625BKTR_OVERRIDE_TUNER opt_bktr.h 626BKTR_OVERRIDE_DBX opt_bktr.h 627BKTR_OVERRIDE_MSP opt_bktr.h 628BKTR_SYSTEM_DEFAULT opt_bktr.h 629BKTR_ALLOC_PAGES opt_bktr.h 630BKTR_USE_PLL opt_bktr.h 631BKTR_GPIO_ACCESS opt_bktr.h 632BKTR_NO_MSP_RESET opt_bktr.h 633BKTR_430_FX_MODE opt_bktr.h 634BKTR_SIS_VIA_MODE opt_bktr.h 635BKTR_USE_FREEBSD_SMBUS opt_bktr.h 636BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 637 638# Options to support PPS 639UART_PPS_ON_CTS opt_uart.h 640 641# options for bus/device framework 642BUS_DEBUG opt_bus.h 643 644# options for USB support 645USB_DEBUG opt_usb.h 646USB_HOST_ALIGN opt_usb.h 647USB_REQ_DEBUG opt_usb.h 648USB_VERBOSE opt_usb.h 649USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 650U3G_DEBUG opt_u3g.h 651UKBD_DFLT_KEYMAP opt_ukbd.h 652UPLCOM_INTR_INTERVAL opt_uplcom.h 653UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 654UVSCOM_INTR_INTERVAL opt_uvscom.h 655 656# Embedded system options 657INIT_PATH 658 659ROOTDEVNAME 660 661FDC_DEBUG opt_fdc.h 662PCFCLOCK_VERBOSE opt_pcfclock.h 663PCFCLOCK_MAX_RETRIES opt_pcfclock.h 664 665KTR opt_global.h 666KTR_ALQ opt_ktr.h 667KTR_MASK opt_ktr.h 668KTR_CPUMASK opt_ktr.h 669KTR_COMPILE opt_global.h 670KTR_ENTRIES opt_global.h 671KTR_VERBOSE opt_ktr.h 672WITNESS opt_global.h 673WITNESS_KDB opt_witness.h 674WITNESS_SKIPSPIN opt_witness.h 675 676# options for ACPI support 677ACPI_DEBUG opt_acpi.h 678ACPI_MAX_TASKS opt_acpi.h 679ACPI_MAX_THREADS opt_acpi.h 680 681# ISA support 682DEV_ISA opt_isa.h 683ISAPNP opt_isa.h 684 685# various 'device presence' options. 686DEV_BPF opt_bpf.h 687DEV_NETMAP opt_global.h 688DEV_MCA opt_mca.h 689DEV_CARP opt_carp.h 690DEV_SPLASH opt_splash.h 691 692# EISA support 693DEV_EISA opt_eisa.h 694EISA_SLOTS opt_eisa.h 695 696# ed driver 697ED_HPP opt_ed.h 698ED_3C503 opt_ed.h 699ED_SIC opt_ed.h 700 701# bce driver 702BCE_DEBUG opt_bce.h 703BCE_NVRAM_WRITE_SUPPORT opt_bce.h 704 705# bxe driver 706BXE_DEBUG opt_bxe.h 707BXE_NVRAM_WRITE_SUPPORT opt_bxe.h 708 709SOCKBUF_DEBUG opt_global.h 710 711 712# options for ubsec driver 713UBSEC_DEBUG opt_ubsec.h 714UBSEC_RNDTEST opt_ubsec.h 715UBSEC_NO_RNG opt_ubsec.h 716 717# options for hifn driver 718HIFN_DEBUG opt_hifn.h 719HIFN_RNDTEST opt_hifn.h 720 721# options for safenet driver 722SAFE_DEBUG opt_safe.h 723SAFE_NO_RNG opt_safe.h 724SAFE_RNDTEST opt_safe.h 725 726# syscons options 727MAXCONS opt_syscons.h 728SC_ALT_MOUSE_IMAGE opt_syscons.h 729SC_CUT_SPACES2TABS opt_syscons.h 730SC_CUT_SEPCHARS opt_syscons.h 731SC_DEBUG_LEVEL opt_syscons.h 732SC_DFLT_FONT opt_syscons.h 733SC_DISABLE_KDBKEY opt_syscons.h 734SC_DISABLE_REBOOT opt_syscons.h 735SC_HISTORY_SIZE opt_syscons.h 736SC_KERNEL_CONS_ATTR opt_syscons.h 737SC_KERNEL_CONS_REV_ATTR opt_syscons.h 738SC_MOUSE_CHAR opt_syscons.h 739SC_NO_CUTPASTE opt_syscons.h 740SC_NO_FONT_LOADING opt_syscons.h 741SC_NO_HISTORY opt_syscons.h 742SC_NO_MODE_CHANGE opt_syscons.h 743SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 744SC_NO_SYSMOUSE opt_syscons.h 745SC_NORM_ATTR opt_syscons.h 746SC_NORM_REV_ATTR opt_syscons.h 747SC_PIXEL_MODE opt_syscons.h 748SC_RENDER_DEBUG opt_syscons.h 749SC_TWOBUTTON_MOUSE opt_syscons.h 750 751# teken terminal emulator options 752TEKEN_CONS25 opt_teken.h 753TEKEN_UTF8 opt_teken.h 754 755# options for printf 756PRINTF_BUFR_SIZE opt_printf.h 757 758# kbd options 759KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 760KBD_INSTALL_CDEV opt_kbd.h 761KBD_MAXRETRY opt_kbd.h 762KBD_MAXWAIT opt_kbd.h 763KBD_RESETDELAY opt_kbd.h 764KBDIO_DEBUG opt_kbd.h 765 766# options for the Atheros driver 767ATH_DEBUG opt_ath.h 768ATH_TXBUF opt_ath.h 769ATH_RXBUF opt_ath.h 770ATH_DIAGAPI opt_ath.h 771ATH_TX99_DIAG opt_ath.h 772ATH_ENABLE_11N opt_ath.h 773ATH_ENABLE_DFS opt_ath.h 774ATH_EEPROM_FIRMWARE opt_ath.h 775ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 776 777# options for the Atheros hal 778AH_SUPPORT_AR5416 opt_ah.h 779# XXX For now, this breaks non-AR9130 chipsets, so only use it 780# XXX when actually targetting AR9130. 781AH_SUPPORT_AR9130 opt_ah.h 782 783AH_DEBUG opt_ah.h 784AH_ASSERT opt_ah.h 785AH_DEBUG_ALQ opt_ah.h 786AH_REGOPS_FUNC opt_ah.h 787AH_WRITE_REGDOMAIN opt_ah.h 788AH_DEBUG_COUNTRY opt_ah.h 789AH_WRITE_EEPROM opt_ah.h 790AH_PRIVATE_DIAG opt_ah.h 791AH_NEED_DESC_SWAP opt_ah.h 792AH_USE_INIPDGAIN opt_ah.h 793AH_MAXCHAN opt_ah.h 794AH_RXCFG_SDMAMW_4BYTES opt_ah.h 795 796# AR5416 and later interrupt mitigation 797# XXX do not use this for AR9130 798AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 799 800# options for the Broadcom BCM43xx driver (bwi) 801BWI_DEBUG opt_bwi.h 802BWI_DEBUG_VERBOSE opt_bwi.h 803 804# options for the Marvell 8335 wireless driver 805MALO_DEBUG opt_malo.h 806MALO_TXBUF opt_malo.h 807MALO_RXBUF opt_malo.h 808 809# options for the Marvell wireless driver 810MWL_DEBUG opt_mwl.h 811MWL_TXBUF opt_mwl.h 812MWL_RXBUF opt_mwl.h 813MWL_DIAGAPI opt_mwl.h 814MWL_AGGR_SIZE opt_mwl.h 815MWL_TX_NODROP opt_mwl.h 816 817# dcons options 818DCONS_BUF_SIZE opt_dcons.h 819DCONS_POLL_HZ opt_dcons.h 820DCONS_FORCE_CONSOLE opt_dcons.h 821DCONS_FORCE_GDB opt_dcons.h 822 823# HWPMC options 824HWPMC_HOOKS 825HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h 826 827# XBOX options for FreeBSD/i386, but some files are MI 828XBOX opt_xbox.h 829 830ZFS opt_dontuse.h 831 832# Interrupt filtering 833INTR_FILTER 834 835# 802.11 support layer 836IEEE80211_DEBUG opt_wlan.h 837IEEE80211_DEBUG_REFCNT opt_wlan.h 838IEEE80211_AMPDU_AGE opt_wlan.h 839IEEE80211_SUPPORT_MESH opt_wlan.h 840IEEE80211_SUPPORT_SUPERG opt_wlan.h 841IEEE80211_SUPPORT_TDMA opt_wlan.h 842IEEE80211_ALQ opt_wlan.h 843IEEE80211_DFS_DEBUG opt_wlan.h 844 845# 802.11 TDMA support 846TDMA_SLOTLEN_DEFAULT opt_tdma.h 847TDMA_SLOTCNT_DEFAULT opt_tdma.h 848TDMA_BINTVAL_DEFAULT opt_tdma.h 849TDMA_TXRATE_11B_DEFAULT opt_tdma.h 850TDMA_TXRATE_11G_DEFAULT opt_tdma.h 851TDMA_TXRATE_11A_DEFAULT opt_tdma.h 852TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 853TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 854TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 855TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 856TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 857 858# Network stack virtualization options 859VIMAGE opt_global.h 860VNET_DEBUG opt_global.h 861 862# Common Flash Interface (CFI) options 863CFI_SUPPORT_STRATAFLASH opt_cfi.h 864CFI_ARMEDANDDANGEROUS opt_cfi.h 865 866# Sound options 867SND_DEBUG opt_snd.h 868SND_DIAGNOSTIC opt_snd.h 869SND_FEEDER_MULTIFORMAT opt_snd.h 870SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 871SND_FEEDER_RATE_HP opt_snd.h 872SND_PCM_64 opt_snd.h 873SND_OLDSTEREO opt_snd.h 874 875X86BIOS 876 877# Flattened device tree options 878FDT opt_platform.h 879FDT_DTB_STATIC opt_platform.h 880 881# OFED Infiniband stack 882OFED opt_ofed.h 883OFED_DEBUG_INIT opt_ofed.h 884SDP opt_ofed.h 885SDP_DEBUG opt_ofed.h 886IPOIB opt_ofed.h 887IPOIB_DEBUG opt_ofed.h 888IPOIB_CM opt_ofed.h 889 890# Resource Accounting 891RACCT opt_global.h 892 893# Resource Limits 894RCTL opt_global.h 895