1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affects only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AACRAID_DEBUG opt_aacraid.h 35AHC_ALLOW_MEMIO opt_aic7xxx.h 36AHC_TMODE_ENABLE opt_aic7xxx.h 37AHC_DUMP_EEPROM opt_aic7xxx.h 38AHC_DEBUG opt_aic7xxx.h 39AHC_DEBUG_OPTS opt_aic7xxx.h 40AHC_REG_PRETTY_PRINT opt_aic7xxx.h 41AHD_DEBUG opt_aic79xx.h 42AHD_DEBUG_OPTS opt_aic79xx.h 43AHD_TMODE_ENABLE opt_aic79xx.h 44AHD_REG_PRETTY_PRINT opt_aic79xx.h 45 46# Debugging options. 47ALT_BREAK_TO_DEBUGGER opt_kdb.h 48BREAK_TO_DEBUGGER opt_kdb.h 49BUF_TRACKING opt_global.h 50DDB 51DDB_BUFR_SIZE opt_ddb.h 52DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 53DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 54DDB_CTF opt_ddb.h 55DDB_NUMSYM opt_ddb.h 56EARLY_PRINTF opt_global.h 57FULL_BUF_TRACKING opt_global.h 58GDB 59KDB opt_global.h 60KDB_TRACE opt_kdb.h 61KDB_UNATTENDED opt_kdb.h 62KLD_DEBUG opt_kld.h 63NUM_CORE_FILES opt_global.h 64QUEUE_MACRO_DEBUG_TRACE opt_global.h 65QUEUE_MACRO_DEBUG_TRASH opt_global.h 66SYSCTL_DEBUG opt_sysctl.h 67TEXTDUMP_PREFERRED opt_ddb.h 68TEXTDUMP_VERBOSE opt_ddb.h 69TSLOG opt_global.h 70TSLOGSIZE opt_global.h 71 72# Miscellaneous options. 73ALQ 74ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h 75ATSE_CFI_HACK opt_cfi.h 76AUDIT opt_global.h 77BOOTHOWTO opt_global.h 78BOOTVERBOSE opt_global.h 79CALLOUT_PROFILING 80CAPABILITIES opt_capsicum.h 81CAPABILITY_MODE opt_capsicum.h 82CC_CDG opt_global.h 83CC_CHD opt_global.h 84CC_CUBIC opt_global.h 85CC_DEFAULT opt_cc.h 86CC_DCTCP opt_global.h 87CC_HD opt_global.h 88CC_HTCP opt_global.h 89CC_NEWRENO opt_global.h 90CC_VEGAS opt_global.h 91COMPAT_43 opt_global.h 92COMPAT_43TTY opt_global.h 93COMPAT_FREEBSD4 opt_global.h 94COMPAT_FREEBSD5 opt_global.h 95COMPAT_FREEBSD6 opt_global.h 96COMPAT_FREEBSD7 opt_global.h 97COMPAT_FREEBSD9 opt_global.h 98COMPAT_FREEBSD10 opt_global.h 99COMPAT_FREEBSD11 opt_global.h 100COMPAT_FREEBSD12 opt_global.h 101COMPAT_FREEBSD13 opt_global.h 102COMPAT_LINUXKPI opt_dontuse.h 103COMPILING_LINT opt_global.h 104CY_PCI_FASTINTR 105DEADLKRES opt_watchdog.h 106EXPERIMENTAL opt_global.h 107DIRECTIO 108FILEMON opt_dontuse.h 109FFCLOCK 110FULL_PREEMPTION opt_sched.h 111GZIO opt_gzio.h 112IMGACT_BINMISC opt_dontuse.h 113IPI_PREEMPTION opt_sched.h 114GEOM_BDE opt_geom.h 115GEOM_CACHE opt_geom.h 116GEOM_CONCAT opt_geom.h 117GEOM_ELI opt_geom.h 118GEOM_GATE opt_geom.h 119GEOM_JOURNAL opt_geom.h 120GEOM_LABEL opt_geom.h 121GEOM_LABEL_GPT opt_geom.h 122GEOM_LINUX_LVM opt_geom.h 123GEOM_MAP opt_geom.h 124GEOM_MIRROR opt_geom.h 125GEOM_MOUNTVER opt_geom.h 126GEOM_MULTIPATH opt_geom.h 127GEOM_NOP opt_geom.h 128GEOM_PART_APM opt_geom.h 129GEOM_PART_BSD opt_geom.h 130GEOM_PART_BSD64 opt_geom.h 131GEOM_PART_EBR opt_geom.h 132GEOM_PART_GPT opt_geom.h 133GEOM_PART_LDM opt_geom.h 134GEOM_PART_MBR opt_geom.h 135GEOM_PART_VTOC8 opt_geom.h 136GEOM_RAID opt_geom.h 137GEOM_RAID3 opt_geom.h 138GEOM_SHSEC opt_geom.h 139GEOM_STRIPE opt_geom.h 140GEOM_UZIP opt_geom.h 141GEOM_UZIP_DEBUG opt_geom.h 142GEOM_VINUM opt_geom.h 143GEOM_VIRSTOR opt_geom.h 144GEOM_ZERO opt_geom.h 145IFLIB opt_iflib.h 146KDTRACE_HOOKS opt_global.h 147KDTRACE_FRAME opt_kdtrace.h 148KN_HASHSIZE opt_kqueue.h 149KSTACK_MAX_PAGES 150KSTACK_PAGES 151KSTACK_USAGE_PROF 152KTRACE 153KTRACE_REQUEST_POOL opt_ktrace.h 154LIBICONV 155MAC opt_global.h 156MAC_BIBA opt_dontuse.h 157MAC_BSDEXTENDED opt_dontuse.h 158MAC_DDB opt_dontuse.h 159MAC_IFOFF opt_dontuse.h 160MAC_LOMAC opt_dontuse.h 161MAC_MLS opt_dontuse.h 162MAC_NONE opt_dontuse.h 163MAC_NTPD opt_dontuse.h 164MAC_PARTITION opt_dontuse.h 165MAC_PORTACL opt_dontuse.h 166MAC_PRIORITY opt_dontuse.h 167MAC_SEEOTHERUIDS opt_dontuse.h 168MAC_STATIC opt_mac.h 169MAC_STUB opt_dontuse.h 170MAC_TEST opt_dontuse.h 171MAC_VERIEXEC opt_dontuse.h 172MAC_VERIEXEC_SHA1 opt_dontuse.h 173MAC_VERIEXEC_SHA256 opt_dontuse.h 174MAC_VERIEXEC_SHA384 opt_dontuse.h 175MAC_VERIEXEC_SHA512 opt_dontuse.h 176MD_ROOT opt_md.h 177MD_ROOT_FSTYPE opt_md.h 178MD_ROOT_READONLY opt_md.h 179MD_ROOT_SIZE opt_md.h 180MD_ROOT_MEM opt_md.h 181MFI_DEBUG opt_mfi.h 182MFI_DECODE_LOG opt_mfi.h 183MPROF_BUFFERS opt_mprof.h 184MPROF_HASH_SIZE opt_mprof.h 185NEW_PCIB opt_global.h 186NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 187NO_ADAPTIVE_RWLOCKS 188NO_ADAPTIVE_SX 189NO_OBSOLETE_CODE opt_global.h 190NO_SYSCTL_DESCR opt_global.h 191NSWBUF_MIN opt_param.h 192MBUF_PACKET_ZONE_DISABLE opt_global.h 193PANIC_REBOOT_WAIT_TIME opt_panic.h 194PCI_HP opt_pci.h 195PCI_IOV opt_global.h 196PPC_DEBUG opt_ppc.h 197PPC_PROBE_CHIPSET opt_ppc.h 198PPS_SYNC opt_ntp.h 199PREEMPTION opt_sched.h 200QUOTA 201SCHED_4BSD opt_sched.h 202SCHED_STATS opt_sched.h 203SCHED_ULE opt_sched.h 204SLEEPQUEUE_PROFILING 205SLHCI_DEBUG opt_slhci.h 206STACK opt_stack.h 207SUIDDIR 208MSGMNB opt_sysvipc.h 209MSGMNI opt_sysvipc.h 210MSGSEG opt_sysvipc.h 211MSGSSZ opt_sysvipc.h 212MSGTQL opt_sysvipc.h 213SEMMNI opt_sysvipc.h 214SEMMNS opt_sysvipc.h 215SEMMNU opt_sysvipc.h 216SEMMSL opt_sysvipc.h 217SEMOPM opt_sysvipc.h 218SEMUME opt_sysvipc.h 219SHMALL opt_sysvipc.h 220SHMMAX opt_sysvipc.h 221SHMMAXPGS opt_sysvipc.h 222SHMMIN opt_sysvipc.h 223SHMMNI opt_sysvipc.h 224SHMSEG opt_sysvipc.h 225SYSVMSG opt_sysvipc.h 226SYSVSEM opt_sysvipc.h 227SYSVSHM opt_sysvipc.h 228SW_WATCHDOG opt_watchdog.h 229TCPHPTS opt_inet.h 230TURNSTILE_PROFILING 231UMTX_PROFILING 232UMTX_CHAINS opt_global.h 233VERBOSE_SYSINIT 234ZSTDIO opt_zstdio.h 235 236# Sanitizers 237COVERAGE opt_global.h 238KASAN opt_global.h 239KCOV 240KCSAN opt_global.h 241KMSAN opt_global.h 242KUBSAN opt_global.h 243 244# POSIX kernel options 245P1003_1B_MQUEUE opt_posix.h 246P1003_1B_SEMAPHORES opt_posix.h 247_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 248 249# Do we want the config file compiled into the kernel? 250INCLUDE_CONFIG_FILE opt_config.h 251 252# Options for static filesystems. These should only be used at config 253# time, since the corresponding lkms cannot work if there are any static 254# dependencies. Unusability is enforced by hiding the defines for the 255# options in a never-included header. 256AUTOFS opt_dontuse.h 257CD9660 opt_dontuse.h 258EXT2FS opt_dontuse.h 259FDESCFS opt_dontuse.h 260FFS opt_dontuse.h 261FUSEFS opt_dontuse.h 262MSDOSFS opt_dontuse.h 263NULLFS opt_dontuse.h 264PROCFS opt_dontuse.h 265PSEUDOFS opt_dontuse.h 266SMBFS opt_dontuse.h 267TARFS opt_dontuse.h 268TMPFS opt_dontuse.h 269UDF opt_dontuse.h 270UNIONFS opt_dontuse.h 271ZFS opt_dontuse.h 272 273# Pseudofs debugging 274PSEUDOFS_TRACE opt_pseudofs.h 275 276# Tarfs debugging 277TARFS_DEBUG opt_tarfs.h 278 279# In-kernel GSS-API 280KGSSAPI opt_kgssapi.h 281KGSSAPI_DEBUG opt_kgssapi.h 282 283# These static filesystems have one slightly bogus static dependency in 284# sys/i386/i386/autoconf.c. If any of these filesystems are 285# statically compiled into the kernel, code for mounting them as root 286# filesystems will be enabled - but look below. 287# NFSCL - client 288# NFSD - server 289NFSCL opt_nfs.h 290NFSD opt_nfs.h 291 292# filesystems and libiconv bridge 293CD9660_ICONV opt_dontuse.h 294MSDOSFS_ICONV opt_dontuse.h 295UDF_ICONV opt_dontuse.h 296 297# If you are following the conditions in the copyright, 298# you can enable soft-updates which will speed up a lot of thigs 299# and make the system safer from crashes at the same time. 300# otherwise a STUB module will be compiled in. 301SOFTUPDATES opt_ffs.h 302 303# On small, embedded systems, it can be useful to turn off support for 304# snapshots. It saves about 30-40k for a feature that would be lightly 305# used, if it is used at all. 306NO_FFS_SNAPSHOT opt_ffs.h 307 308# Enabling this option turns on support for Access Control Lists in UFS, 309# which can be used to support high security configurations. Depends on 310# UFS_EXTATTR. 311UFS_ACL opt_ufs.h 312 313# Enabling this option turns on support for extended attributes in UFS-based 314# filesystems, which can be used to support high security configurations 315# as well as new filesystem features. 316UFS_EXTATTR opt_ufs.h 317UFS_EXTATTR_AUTOSTART opt_ufs.h 318 319# Enable fast hash lookups for large directories on UFS-based filesystems. 320UFS_DIRHASH opt_ufs.h 321 322# Enable gjournal-based UFS journal. 323UFS_GJOURNAL opt_ufs.h 324 325# The below sentence is not in English, and neither is this one. 326# We plan to remove the static dependences above, with a 327# <filesystem>_ROOT option to control if it usable as root. This list 328# allows these options to be present in config files already (though 329# they won't make any difference yet). 330NFS_ROOT opt_nfsroot.h 331 332# SMB/CIFS requester 333NETSMB opt_netsmb.h 334 335# Enable debugnet(4) networking support. 336DEBUGNET opt_global.h 337# Enable netdump(4) client support. 338NETDUMP opt_global.h 339# Enable netgdb(4) support. 340NETGDB opt_global.h 341 342# Options used only in subr_param.c. 343HZ opt_param.h 344MAXFILES opt_param.h 345NBUF opt_param.h 346NSFBUFS opt_param.h 347VM_BCACHE_SIZE_MAX opt_param.h 348VM_SWZONE_SIZE_MAX opt_param.h 349MAXUSERS 350DFLDSIZ opt_param.h 351MAXDSIZ opt_param.h 352MAXSSIZ opt_param.h 353 354# Generic SCSI options. 355CAM_MAX_HIGHPOWER opt_cam.h 356CAMDEBUG opt_cam.h 357CAM_DEBUG_COMPILE opt_cam.h 358CAM_DEBUG_DELAY opt_cam.h 359CAM_DEBUG_BUS opt_cam.h 360CAM_DEBUG_TARGET opt_cam.h 361CAM_DEBUG_LUN opt_cam.h 362CAM_DEBUG_FLAGS opt_cam.h 363CAM_BOOT_DELAY opt_cam.h 364CAM_IOSCHED_DYNAMIC opt_cam.h 365CAM_IO_STATS opt_cam.h 366CAM_TEST_FAILURE opt_cam.h 367SCSI_DELAY opt_scsi.h 368SCSI_NO_SENSE_STRINGS opt_scsi.h 369SCSI_NO_OP_STRINGS opt_scsi.h 370 371# Options used only in cam/ata/ata_da.c 372ATA_STATIC_ID opt_ada.h 373 374# Options used only in cam/scsi/scsi_cd.c 375CHANGER_MIN_BUSY_SECONDS opt_cd.h 376CHANGER_MAX_BUSY_SECONDS opt_cd.h 377 378# Options used only in cam/scsi/scsi_da.c 379DA_TRACK_REFS opt_da.h 380 381# Options used only in cam/scsi/scsi_sa.c. 382SA_IO_TIMEOUT opt_sa.h 383SA_SPACE_TIMEOUT opt_sa.h 384SA_REWIND_TIMEOUT opt_sa.h 385SA_ERASE_TIMEOUT opt_sa.h 386SA_1FM_AT_EOD opt_sa.h 387 388# Options used only in cam/scsi/scsi_pt.c 389SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 390 391# Options used only in cam/scsi/scsi_ses.c 392SES_ENABLE_PASSTHROUGH opt_ses.h 393 394# Options used in dev/sym/ (Symbios SCSI driver). 395SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 396 # disabled:0 (default), enabled:1 397SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 398 # disabled:0, enabled:1 (default) 399SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 400 # default:8, range:[1..64] 401 402# Options used only in dev/isp/* 403ISP_TARGET_MODE opt_isp.h 404ISP_FW_CRASH_DUMP opt_isp.h 405ISP_DEFAULT_ROLES opt_isp.h 406ISP_INTERNAL_TARGET opt_isp.h 407ISP_FCTAPE_OFF opt_isp.h 408 409# Options used only in dev/iscsi 410ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 411 412# Net stuff. 413ACCEPT_FILTER_DATA 414ACCEPT_FILTER_DNS 415ACCEPT_FILTER_HTTP 416ALTQ opt_global.h 417ALTQ_CBQ opt_altq.h 418ALTQ_CDNR opt_altq.h 419ALTQ_CODEL opt_altq.h 420ALTQ_DEBUG opt_altq.h 421ALTQ_HFSC opt_altq.h 422ALTQ_FAIRQ opt_altq.h 423ALTQ_NOPCC opt_altq.h 424ALTQ_PRIQ opt_altq.h 425ALTQ_RED opt_altq.h 426ALTQ_RIO opt_altq.h 427BOOTP opt_bootp.h 428BOOTP_BLOCKSIZE opt_bootp.h 429BOOTP_COMPAT opt_bootp.h 430BOOTP_NFSROOT opt_bootp.h 431BOOTP_NFSV3 opt_bootp.h 432BOOTP_WIRED_TO opt_bootp.h 433DEVICE_POLLING 434DUMMYNET opt_ipdn.h 435RATELIMIT opt_ratelimit.h 436RATELIMIT_DEBUG opt_ratelimit.h 437INET opt_inet.h 438INET6 opt_inet6.h 439STATS opt_global.h 440IPDIVERT 441IPFILTER opt_ipfilter.h 442IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 443IPFILTER_LOG opt_ipfilter.h 444IPFILTER_LOOKUP opt_ipfilter.h 445IPFIREWALL opt_ipfw.h 446IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 447IPFIREWALL_NAT opt_ipfw.h 448IPFIREWALL_NAT64 opt_ipfw.h 449IPFIREWALL_NPTV6 opt_ipfw.h 450IPFIREWALL_VERBOSE opt_ipfw.h 451IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 452IPFIREWALL_PMOD opt_ipfw.h 453IPSEC opt_ipsec.h 454IPSEC_DEBUG opt_ipsec.h 455IPSEC_SUPPORT opt_ipsec.h 456IPSTEALTH 457KERN_TLS 458KRPC 459LIBALIAS 460LIBMCHAIN 461MBUF_PROFILING 462MBUF_STRESS_TEST 463MROUTING opt_mrouting.h 464NFSLOCKD 465NETLINK 466PF_DEFAULT_TO_DROP opt_pf.h 467ROUTE_MPATH opt_route.h 468ROUTETABLES opt_route.h 469FIB_ALGO opt_route.h 470RSS opt_rss.h 471SLIP_IFF_OPTS opt_slip.h 472TCPPCAP opt_global.h 473SIFTR 474TCP_BLACKBOX opt_global.h 475TCP_HHOOK opt_global.h 476TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading 477TCP_RFC7413 opt_inet.h 478TCP_RFC7413_MAX_KEYS opt_inet.h 479TCP_RFC7413_MAX_PSKS opt_inet.h 480TCP_SIGNATURE opt_ipsec.h 481VLAN_ARRAY opt_vlan.h 482XDR 483XBONEHACK 484 485# 486# SCTP 487# 488SCTP opt_sctp.h 489SCTP_SUPPORT opt_sctp.h 490SCTP_DEBUG opt_sctp.h # Enable debug printfs 491SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 492SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 493SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 494SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 495SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 496SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 497SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 498SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 499SCTP_LOCAL_TRACE_BUF opt_sctp.h # Use tracebuffer exported via sysctl 500SCTP_DETAILED_STR_STATS opt_sctp.h # Use per PR-SCTP policy stream stats 501# 502# 503# 504 505# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 506# Each netgraph node type can be either be compiled into the kernel 507# or loaded dynamically. To get the former, include the corresponding 508# option below. Each type has its own man page, e.g. ng_async(4). 509NETGRAPH 510NETGRAPH_DEBUG opt_netgraph.h 511NETGRAPH_ASYNC opt_netgraph.h 512NETGRAPH_BLUETOOTH opt_netgraph.h 513NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 514NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 515NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 516NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 517NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 518NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 519NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 520NETGRAPH_BPF opt_netgraph.h 521NETGRAPH_BRIDGE opt_netgraph.h 522NETGRAPH_CAR opt_netgraph.h 523NETGRAPH_CHECKSUM opt_netgraph.h 524NETGRAPH_CISCO opt_netgraph.h 525NETGRAPH_DEFLATE opt_netgraph.h 526NETGRAPH_DEVICE opt_netgraph.h 527NETGRAPH_ECHO opt_netgraph.h 528NETGRAPH_EIFACE opt_netgraph.h 529NETGRAPH_ETHER opt_netgraph.h 530NETGRAPH_ETHER_ECHO opt_netgraph.h 531NETGRAPH_FEC opt_netgraph.h 532NETGRAPH_FRAME_RELAY opt_netgraph.h 533NETGRAPH_GIF opt_netgraph.h 534NETGRAPH_GIF_DEMUX opt_netgraph.h 535NETGRAPH_HOLE opt_netgraph.h 536NETGRAPH_IFACE opt_netgraph.h 537NETGRAPH_IP_INPUT opt_netgraph.h 538NETGRAPH_IPFW opt_netgraph.h 539NETGRAPH_KSOCKET opt_netgraph.h 540NETGRAPH_L2TP opt_netgraph.h 541NETGRAPH_LMI opt_netgraph.h 542NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 543NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 544NETGRAPH_NAT opt_netgraph.h 545NETGRAPH_NETFLOW opt_netgraph.h 546NETGRAPH_ONE2MANY opt_netgraph.h 547NETGRAPH_PATCH opt_netgraph.h 548NETGRAPH_PIPE opt_netgraph.h 549NETGRAPH_PPP opt_netgraph.h 550NETGRAPH_PPPOE opt_netgraph.h 551NETGRAPH_PPTPGRE opt_netgraph.h 552NETGRAPH_PRED1 opt_netgraph.h 553NETGRAPH_RFC1490 opt_netgraph.h 554NETGRAPH_SOCKET opt_netgraph.h 555NETGRAPH_SPLIT opt_netgraph.h 556NETGRAPH_SPPP opt_netgraph.h 557NETGRAPH_TAG opt_netgraph.h 558NETGRAPH_TCPMSS opt_netgraph.h 559NETGRAPH_TEE opt_netgraph.h 560NETGRAPH_TTY opt_netgraph.h 561NETGRAPH_UI opt_netgraph.h 562NETGRAPH_VJC opt_netgraph.h 563NETGRAPH_VLAN opt_netgraph.h 564 565# DRM options 566DRM_DEBUG opt_drm.h 567 568TI_SF_BUF_JUMBO opt_ti.h 569TI_JUMBO_HDRSPLIT opt_ti.h 570 571# Misc debug flags. Most of these should probably be replaced with 572# 'DEBUG', and then let people recompile just the interesting modules 573# with 'make CC="cc -DDEBUG"'. 574DEBUG_1284 opt_ppb_1284.h 575LPT_DEBUG opt_lpt.h 576PLIP_DEBUG opt_plip.h 577LOCKF_DEBUG opt_debug_lockf.h 578SI_DEBUG opt_debug_si.h 579IFMEDIA_DEBUG opt_ifmedia.h 580 581# Fb options 582FB_DEBUG opt_fb.h 583 584# ppbus related options 585PERIPH_1284 opt_ppb_1284.h 586DONTPROBE_1284 opt_ppb_1284.h 587 588# smbus related options 589ENABLE_ALART opt_intpm.h 590 591# These cause changes all over the kernel 592BLKDEV_IOSIZE opt_global.h 593BURN_BRIDGES opt_global.h 594DEBUG opt_global.h 595DEBUG_LOCKS opt_global.h 596DEBUG_VFS_LOCKS opt_global.h 597DFLTPHYS opt_global.h 598DIAGNOSTIC opt_global.h 599INVARIANT_SUPPORT opt_global.h 600INVARIANTS opt_global.h 601KASSERT_PANIC_OPTIONAL opt_global.h 602MAXCPU opt_global.h 603MAXMEMDOM opt_global.h 604MAXPHYS opt_maxphys.h 605MCLSHIFT opt_global.h 606MUTEX_NOINLINE opt_global.h 607LOCK_PROFILING opt_global.h 608MSIZE opt_global.h 609REGRESSION opt_global.h 610RWLOCK_NOINLINE opt_global.h 611SX_NOINLINE opt_global.h 612VFS_BIO_DEBUG opt_global.h 613 614# These are VM related options 615VM_KMEM_SIZE opt_vm.h 616VM_KMEM_SIZE_SCALE opt_vm.h 617VM_KMEM_SIZE_MAX opt_vm.h 618VM_NRESERVLEVEL opt_vm.h 619VM_LEVEL_0_ORDER opt_vm.h 620NO_SWAPPING opt_vm.h 621MALLOC_MAKE_FAILURES opt_vm.h 622MALLOC_PROFILE opt_vm.h 623MALLOC_DEBUG_MAXZONES opt_vm.h 624 625# The MemGuard replacement allocator used for tamper-after-free detection 626DEBUG_MEMGUARD opt_vm.h 627 628# The RedZone malloc(9) protection 629DEBUG_REDZONE opt_vm.h 630 631# Standard SMP options 632EARLY_AP_STARTUP opt_global.h 633SMP opt_global.h 634NUMA opt_global.h 635 636# Size of the kernel message buffer 637MSGBUF_SIZE opt_msgbuf.h 638 639# NFS options 640NFS_MINATTRTIMO opt_nfs.h 641NFS_MAXATTRTIMO opt_nfs.h 642NFS_MINDIRATTRTIMO opt_nfs.h 643NFS_MAXDIRATTRTIMO opt_nfs.h 644NFS_DEBUG opt_nfs.h 645 646# TMPFS options 647TMPFS_PAGES_MINRESERVED opt_tmpfs.h 648 649# Options for uart(4) 650UART_PPS_ON_CTS opt_uart.h 651UART_POLL_FREQ opt_uart.h 652UART_DEV_TOLERANCE_PCT opt_uart.h 653 654# options for bus/device framework 655BUS_DEBUG opt_bus.h 656 657# options for USB support 658USB_DEBUG opt_usb.h 659USB_HOST_ALIGN opt_usb.h 660USB_REQ_DEBUG opt_usb.h 661USB_TEMPLATE opt_usb.h 662USB_VERBOSE opt_usb.h 663USB_DMA_SINGLE_ALLOC opt_usb.h 664USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 665U3G_DEBUG opt_u3g.h 666UKBD_DFLT_KEYMAP opt_ukbd.h 667UPLCOM_INTR_INTERVAL opt_uplcom.h 668UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 669UVSCOM_INTR_INTERVAL opt_uvscom.h 670 671# options for the Realtek rtwn driver 672RTWN_DEBUG opt_rtwn.h 673RTWN_WITHOUT_UCODE opt_rtwn.h 674 675# Embedded system options 676INIT_PATH 677 678ROOTDEVNAME 679 680FDC_DEBUG opt_fdc.h 681PCFCLOCK_VERBOSE opt_pcfclock.h 682PCFCLOCK_MAX_RETRIES opt_pcfclock.h 683 684KTR opt_global.h 685KTR_ALQ opt_ktr.h 686KTR_MASK opt_ktr.h 687KTR_CPUMASK opt_ktr.h 688KTR_COMPILE opt_global.h 689KTR_BOOT_ENTRIES opt_global.h 690KTR_ENTRIES opt_global.h 691KTR_VERBOSE opt_ktr.h 692WITNESS opt_global.h 693WITNESS_KDB opt_witness.h 694WITNESS_NO_VNODE opt_witness.h 695WITNESS_SKIPSPIN opt_witness.h 696WITNESS_COUNT opt_witness.h 697OPENSOLARIS_WITNESS opt_global.h 698 699EPOCH_TRACE opt_global.h 700 701# options for ACPI support 702ACPI_DEBUG opt_acpi.h 703ACPI_MAX_TASKS opt_acpi.h 704ACPI_MAX_THREADS opt_acpi.h 705DEV_ACPI opt_acpi.h 706ACPI_EARLY_EPYC_WAR opt_acpi.h 707 708# options for IOMMU support 709IOMMU opt_iommu.h 710 711# ISA support 712DEV_ISA opt_isa.h 713ISAPNP opt_dontuse.h 714 715# various 'device presence' options. 716DEV_BPF opt_bpf.h 717DEV_CARP opt_carp.h 718DEV_NETMAP opt_global.h 719DEV_PCI opt_pci.h 720DEV_PF opt_pf.h 721DEV_PFLOG opt_pf.h 722DEV_PFSYNC opt_pf.h 723DEV_SPLASH opt_splash.h 724DEV_VLAN opt_vlan.h 725 726# bce driver 727BCE_DEBUG opt_bce.h 728BCE_NVRAM_WRITE_SUPPORT opt_bce.h 729 730SOCKBUF_DEBUG opt_global.h 731 732 733# options for hifn driver 734HIFN_DEBUG opt_hifn.h 735HIFN_RNDTEST opt_hifn.h 736 737# options for safenet driver 738SAFE_DEBUG opt_safe.h 739SAFE_NO_RNG opt_safe.h 740SAFE_RNDTEST opt_safe.h 741 742# syscons/vt options 743MAXCONS opt_syscons.h 744SC_ALT_MOUSE_IMAGE opt_syscons.h 745SC_CUT_SPACES2TABS opt_syscons.h 746SC_CUT_SEPCHARS opt_syscons.h 747SC_DEBUG_LEVEL opt_syscons.h 748SC_DFLT_FONT opt_syscons.h 749SC_DFLT_TERM opt_syscons.h 750SC_DISABLE_KDBKEY opt_syscons.h 751SC_DISABLE_REBOOT opt_syscons.h 752SC_HISTORY_SIZE opt_syscons.h 753SC_KERNEL_CONS_ATTR opt_syscons.h 754SC_KERNEL_CONS_ATTRS opt_syscons.h 755SC_KERNEL_CONS_REV_ATTR opt_syscons.h 756SC_MOUSE_CHAR opt_syscons.h 757SC_NO_CUTPASTE opt_syscons.h 758SC_NO_FONT_LOADING opt_syscons.h 759SC_NO_HISTORY opt_syscons.h 760SC_NO_MODE_CHANGE opt_syscons.h 761SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 762SC_NO_SYSMOUSE opt_syscons.h 763SC_NO_TERM_DUMB opt_syscons.h 764SC_NO_TERM_SC opt_syscons.h 765SC_NO_TERM_TEKEN opt_syscons.h 766SC_NORM_ATTR opt_syscons.h 767SC_NORM_REV_ATTR opt_syscons.h 768SC_PIXEL_MODE opt_syscons.h 769SC_RENDER_DEBUG opt_syscons.h 770SC_TWOBUTTON_MOUSE opt_syscons.h 771VT_ALT_TO_ESC_HACK opt_syscons.h 772VT_FB_MAX_WIDTH opt_syscons.h 773VT_FB_MAX_HEIGHT opt_syscons.h 774VT_MAXWINDOWS opt_syscons.h 775VT_TWOBUTTON_MOUSE opt_syscons.h 776DEV_SC opt_syscons.h 777DEV_VT opt_syscons.h 778 779# teken terminal emulator options 780TEKEN_CONS25 opt_teken.h 781TEKEN_UTF8 opt_teken.h 782TERMINAL_KERN_ATTR opt_teken.h 783TERMINAL_NORM_ATTR opt_teken.h 784 785# options for printf 786PRINTF_BUFR_SIZE opt_printf.h 787BOOT_TAG opt_printf.h 788BOOT_TAG_SZ opt_printf.h 789 790# kbd options 791KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 792KBD_INSTALL_CDEV opt_kbd.h 793KBD_MAXRETRY opt_kbd.h 794KBD_MAXWAIT opt_kbd.h 795KBD_RESETDELAY opt_kbd.h 796KBD_DELAY1 opt_kbd.h 797KBD_DELAY2 opt_kbd.h 798KBDIO_DEBUG opt_kbd.h 799KBDMUX_DFLT_KEYMAP opt_kbdmux.h 800 801# options for the Atheros driver 802ATH_DEBUG opt_ath.h 803ATH_TXBUF opt_ath.h 804ATH_RXBUF opt_ath.h 805ATH_DIAGAPI opt_ath.h 806ATH_TX99_DIAG opt_ath.h 807ATH_ENABLE_11N opt_ath.h 808ATH_ENABLE_DFS opt_ath.h 809ATH_EEPROM_FIRMWARE opt_ath.h 810ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 811ATH_DEBUG_ALQ opt_ath.h 812ATH_KTR_INTR_DEBUG opt_ath.h 813 814# options for the Atheros hal 815# XXX For now, this breaks non-AR9130 chipsets, so only use it 816# XXX when actually targeting AR9130. 817AH_SUPPORT_AR9130 opt_ah.h 818 819# This is required for AR933x SoC support 820AH_SUPPORT_AR9330 opt_ah.h 821AH_SUPPORT_AR9340 opt_ah.h 822AH_SUPPORT_QCA9530 opt_ah.h 823AH_SUPPORT_QCA9550 opt_ah.h 824 825AH_DEBUG opt_ah.h 826AH_ASSERT opt_ah.h 827AH_DEBUG_ALQ opt_ah.h 828AH_REGOPS_FUNC opt_ah.h 829AH_WRITE_REGDOMAIN opt_ah.h 830AH_DEBUG_COUNTRY opt_ah.h 831AH_WRITE_EEPROM opt_ah.h 832AH_PRIVATE_DIAG opt_ah.h 833AH_NEED_DESC_SWAP opt_ah.h 834AH_USE_INIPDGAIN opt_ah.h 835AH_MAXCHAN opt_ah.h 836AH_RXCFG_SDMAMW_4BYTES opt_ah.h 837AH_INTERRUPT_DEBUGGING opt_ah.h 838# AR5416 and later interrupt mitigation 839# XXX do not use this for AR9130 840AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 841 842# options for the Altera mSGDMA driver (altera_msgdma) 843ALTERA_MSGDMA_DESC_STD opt_altera_msgdma.h 844ALTERA_MSGDMA_DESC_EXT opt_altera_msgdma.h 845ALTERA_MSGDMA_DESC_PF_STD opt_altera_msgdma.h 846ALTERA_MSGDMA_DESC_PF_EXT opt_altera_msgdma.h 847 848# options for the Broadcom BCM43xx driver (bwi) 849BWI_DEBUG opt_bwi.h 850BWI_DEBUG_VERBOSE opt_bwi.h 851 852# options for the Brodacom BCM43xx driver (bwn) 853BWN_DEBUG opt_bwn.h 854BWN_GPL_PHY opt_bwn.h 855BWN_USE_SIBA opt_bwn.h 856 857# Options for the SIBA driver 858SIBA_DEBUG opt_siba.h 859 860# options for the Marvell 8335 wireless driver 861MALO_DEBUG opt_malo.h 862MALO_TXBUF opt_malo.h 863MALO_RXBUF opt_malo.h 864 865# options for the Marvell wireless driver 866MWL_DEBUG opt_mwl.h 867MWL_TXBUF opt_mwl.h 868MWL_RXBUF opt_mwl.h 869MWL_DIAGAPI opt_mwl.h 870MWL_AGGR_SIZE opt_mwl.h 871MWL_TX_NODROP opt_mwl.h 872 873# Options for the Marvell NETA driver 874MVNETA_MULTIQUEUE opt_mvneta.h 875MVNETA_KTR opt_mvneta.h 876 877# Options for the Intel 802.11ac wireless driver 878IWM_DEBUG opt_iwm.h 879 880# Options for the Intel 802.11n wireless driver 881IWN_DEBUG opt_iwn.h 882 883# Options for the Intel 3945ABG wireless driver 884WPI_DEBUG opt_wpi.h 885 886# dcons options 887DCONS_BUF_SIZE opt_dcons.h 888DCONS_POLL_HZ opt_dcons.h 889DCONS_FORCE_CONSOLE opt_dcons.h 890DCONS_FORCE_GDB opt_dcons.h 891 892# HWPMC options 893HWPMC_DEBUG opt_global.h 894HWPMC_HOOKS 895HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h 896 897# 802.11 support layer 898IEEE80211_DEBUG opt_wlan.h 899IEEE80211_DEBUG_REFCNT opt_wlan.h 900IEEE80211_SUPPORT_MESH opt_wlan.h 901IEEE80211_SUPPORT_SUPERG opt_wlan.h 902IEEE80211_SUPPORT_TDMA opt_wlan.h 903IEEE80211_ALQ opt_wlan.h 904IEEE80211_DFS_DEBUG opt_wlan.h 905 906# 802.11 TDMA support 907TDMA_SLOTLEN_DEFAULT opt_tdma.h 908TDMA_SLOTCNT_DEFAULT opt_tdma.h 909TDMA_BINTVAL_DEFAULT opt_tdma.h 910TDMA_TXRATE_11B_DEFAULT opt_tdma.h 911TDMA_TXRATE_11G_DEFAULT opt_tdma.h 912TDMA_TXRATE_11A_DEFAULT opt_tdma.h 913TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 914TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 915TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 916TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 917TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 918 919# VideoMode 920PICKMODE_DEBUG opt_videomode.h 921 922# Network stack virtualization options 923VIMAGE opt_global.h 924VNET_DEBUG opt_global.h 925 926# Common Flash Interface (CFI) options 927CFI_SUPPORT_STRATAFLASH opt_cfi.h 928CFI_ARMEDANDDANGEROUS opt_cfi.h 929CFI_HARDWAREBYTESWAP opt_cfi.h 930 931# Sound options 932SND_DEBUG opt_snd.h 933SND_DIAGNOSTIC opt_snd.h 934SND_FEEDER_MULTIFORMAT opt_snd.h 935SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 936SND_FEEDER_RATE_HP opt_snd.h 937SND_PCM_64 opt_snd.h 938SND_OLDSTEREO opt_snd.h 939 940X86BIOS 941 942# Flattened device tree options 943FDT opt_platform.h 944FDT_DTB_STATIC opt_platform.h 945 946# OFED Infiniband stack 947OFED opt_ofed.h 948OFED_DEBUG_INIT opt_ofed.h 949SDP opt_ofed.h 950SDP_DEBUG opt_ofed.h 951IPOIB opt_ofed.h 952IPOIB_DEBUG opt_ofed.h 953IPOIB_CM opt_ofed.h 954 955# Resource Accounting 956RACCT opt_global.h 957RACCT_DEFAULT_TO_DISABLED opt_global.h 958 959# Resource Limits 960RCTL opt_global.h 961 962# Random number generator(s) 963# Alternative RNG algorithm. 964RANDOM_FENESTRASX opt_global.h 965# With this, no entropy processor is loaded, but the entropy 966# harvesting infrastructure is present. This means an entropy 967# processor may be loaded as a module. 968RANDOM_LOADABLE opt_global.h 969# This turns on high-rate and potentially expensive harvesting in 970# the uma slab allocator. 971RANDOM_ENABLE_UMA opt_global.h 972RANDOM_ENABLE_ETHER opt_global.h 973 974# This options turns TPM into entropy source. 975TPM_HARVEST opt_tpm.h 976 977# BHND(4) driver 978BHND_LOGLEVEL opt_global.h 979 980# GPIO and child devices 981GPIO_SPI_DEBUG opt_gpio.h 982 983# SPI devices 984SPIGEN_LEGACY_CDEVNAME opt_spi.h 985 986# etherswitch(4) driver 987RTL8366_SOFT_RESET opt_etherswitch.h 988 989# evdev protocol support 990EVDEV_SUPPORT opt_evdev.h 991EVDEV_DEBUG opt_evdev.h 992UINPUT_DEBUG opt_evdev.h 993 994# Hyper-V network driver 995HN_DEBUG opt_hn.h 996 997# CAM-based MMC stack 998MMCCAM 999# Encrypted kernel crash dumps 1000EKCD opt_ekcd.h 1001 1002# NVME options 1003NVME_USE_NVD opt_nvme.h 1004NVME_2X_RESET opt_nvme.h 1005 1006# amdsbwd options 1007AMDSBWD_DEBUG opt_amdsbwd.h 1008 1009# gcov support 1010GCOV opt_global.h 1011LINDEBUGFS 1012 1013# options for HID support 1014HID_DEBUG opt_hid.h 1015IICHID_DEBUG opt_hid.h 1016IICHID_SAMPLING opt_hid.h 1017HKBD_DFLT_KEYMAP opt_hkbd.h 1018HIDRAW_MAKE_UHID_ALIAS opt_hid.h 1019 1020# kenv options 1021# The early kernel environment (loader environment, config(8)-provided static) 1022# is typically cleared after the dynamic environment comes up to ensure that 1023# we're not inadvertently holding on to 'secret' values in these stale envs. 1024# This option is insecure except in controlled environments where the static 1025# environment's contents are known to be safe. 1026PRESERVE_EARLY_KENV opt_global.h 1027