1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affects only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AHC_ALLOW_MEMIO opt_aic7xxx.h 35AHC_TMODE_ENABLE opt_aic7xxx.h 36AHC_DUMP_EEPROM opt_aic7xxx.h 37AHC_DEBUG opt_aic7xxx.h 38AHC_DEBUG_OPTS opt_aic7xxx.h 39AHC_REG_PRETTY_PRINT opt_aic7xxx.h 40AHD_DEBUG opt_aic79xx.h 41AHD_DEBUG_OPTS opt_aic79xx.h 42AHD_TMODE_ENABLE opt_aic79xx.h 43AHD_REG_PRETTY_PRINT opt_aic79xx.h 44ADW_ALLOW_MEMIO opt_adw.h 45 46TWA_DEBUG opt_twa.h 47TWA_FLASH_FIRMWARE opt_twa.h 48 49# Debugging options. 50ALT_BREAK_TO_DEBUGGER opt_kdb.h 51BREAK_TO_DEBUGGER opt_kdb.h 52DDB 53DDB_BUFR_SIZE opt_ddb.h 54DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 55DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 56DDB_CTF opt_ddb.h 57DDB_NUMSYM opt_ddb.h 58GDB 59KDB opt_global.h 60KDB_TRACE opt_kdb.h 61KDB_UNATTENDED opt_kdb.h 62KLD_DEBUG opt_kld.h 63SYSCTL_DEBUG opt_sysctl.h 64 65# Miscellaneous options. 66ADAPTIVE_LOCKMGRS 67ALQ 68AUDIT opt_global.h 69CAPABILITIES opt_capsicum.h 70CAPABILITY_MODE opt_capsicum.h 71CODA_COMPAT_5 opt_coda.h 72COMPAT_43 opt_compat.h 73COMPAT_43TTY opt_compat.h 74COMPAT_FREEBSD4 opt_compat.h 75COMPAT_FREEBSD5 opt_compat.h 76COMPAT_FREEBSD6 opt_compat.h 77COMPAT_FREEBSD7 opt_compat.h 78COMPILING_LINT opt_global.h 79COMPRESS_USER_CORES opt_core.h 80CY_PCI_FASTINTR 81DEADLKRES opt_watchdog.h 82DIRECTIO 83FFCLOCK 84FULL_PREEMPTION opt_sched.h 85IPI_PREEMPTION opt_sched.h 86GEOM_AES opt_geom.h 87GEOM_BDE opt_geom.h 88GEOM_BSD opt_geom.h 89GEOM_CACHE opt_geom.h 90GEOM_CONCAT opt_geom.h 91GEOM_ELI opt_geom.h 92GEOM_FOX opt_geom.h 93GEOM_GATE opt_geom.h 94GEOM_JOURNAL opt_geom.h 95GEOM_LABEL opt_geom.h 96GEOM_LINUX_LVM opt_geom.h 97GEOM_MBR opt_geom.h 98GEOM_MIRROR opt_geom.h 99GEOM_MULTIPATH opt_geom.h 100GEOM_NOP opt_geom.h 101GEOM_PART_APM opt_geom.h 102GEOM_PART_BSD opt_geom.h 103GEOM_PART_EBR opt_geom.h 104GEOM_PART_EBR_COMPAT opt_geom.h 105GEOM_PART_GPT opt_geom.h 106GEOM_PART_LDM opt_geom.h 107GEOM_PART_MBR opt_geom.h 108GEOM_PART_PC98 opt_geom.h 109GEOM_PART_VTOC8 opt_geom.h 110GEOM_PC98 opt_geom.h 111GEOM_RAID opt_geom.h 112GEOM_RAID3 opt_geom.h 113GEOM_SHSEC opt_geom.h 114GEOM_STRIPE opt_geom.h 115GEOM_SUNLABEL opt_geom.h 116GEOM_UNCOMPRESS opt_geom.h 117GEOM_UZIP opt_geom.h 118GEOM_VIRSTOR opt_geom.h 119GEOM_VOL opt_geom.h 120GEOM_ZERO opt_geom.h 121KDTRACE_HOOKS opt_kdtrace.h 122KSTACK_MAX_PAGES 123KSTACK_PAGES 124KTRACE 125KTRACE_REQUEST_POOL opt_ktrace.h 126LIBICONV 127MAC opt_global.h 128MAC_BIBA opt_dontuse.h 129MAC_BSDEXTENDED opt_dontuse.h 130MAC_IFOFF opt_dontuse.h 131MAC_LOMAC opt_dontuse.h 132MAC_MLS opt_dontuse.h 133MAC_NONE opt_dontuse.h 134MAC_PARTITION opt_dontuse.h 135MAC_PORTACL opt_dontuse.h 136MAC_SEEOTHERUIDS opt_dontuse.h 137MAC_STATIC opt_mac.h 138MAC_STUB opt_dontuse.h 139MAC_TEST opt_dontuse.h 140MD_ROOT opt_md.h 141MD_ROOT_SIZE opt_md.h 142MFI_DEBUG opt_mfi.h 143MFI_DECODE_LOG opt_mfi.h 144MPROF_BUFFERS opt_mprof.h 145MPROF_HASH_SIZE opt_mprof.h 146NEW_PCIB opt_global.h 147NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 148NO_ADAPTIVE_RWLOCKS 149NO_ADAPTIVE_SX 150NO_SYSCTL_DESCR opt_global.h 151NSWBUF_MIN opt_swap.h 152MBUF_PACKET_ZONE_DISABLE opt_global.h 153PANIC_REBOOT_WAIT_TIME opt_panic.h 154PPC_DEBUG opt_ppc.h 155PPC_PROBE_CHIPSET opt_ppc.h 156PPS_SYNC opt_ntp.h 157PREEMPTION opt_sched.h 158PROCDESC opt_procdesc.h 159QUOTA 160SCHED_4BSD opt_sched.h 161SCHED_STATS opt_sched.h 162SCHED_ULE opt_sched.h 163SLEEPQUEUE_PROFILING 164SLHCI_DEBUG opt_slhci.h 165SPX_HACK 166STACK opt_stack.h 167SUIDDIR 168MSGMNB opt_sysvipc.h 169MSGMNI opt_sysvipc.h 170MSGSEG opt_sysvipc.h 171MSGSSZ opt_sysvipc.h 172MSGTQL opt_sysvipc.h 173SEMMNI opt_sysvipc.h 174SEMMNS opt_sysvipc.h 175SEMMNU opt_sysvipc.h 176SEMMSL opt_sysvipc.h 177SEMOPM opt_sysvipc.h 178SEMUME opt_sysvipc.h 179SHMALL opt_sysvipc.h 180SHMMAX opt_sysvipc.h 181SHMMAXPGS opt_sysvipc.h 182SHMMIN opt_sysvipc.h 183SHMMNI opt_sysvipc.h 184SHMSEG opt_sysvipc.h 185SYSVMSG opt_sysvipc.h 186SYSVSEM opt_sysvipc.h 187SYSVSHM opt_sysvipc.h 188SW_WATCHDOG opt_watchdog.h 189TURNSTILE_PROFILING 190UMTX_PROFILING 191VFS_AIO 192VFS_ALLOW_NONMPSAFE 193VERBOSE_SYSINIT opt_global.h 194WLCACHE opt_wavelan.h 195WLDEBUG opt_wavelan.h 196 197# POSIX kernel options 198P1003_1B_MQUEUE opt_posix.h 199P1003_1B_SEMAPHORES opt_posix.h 200_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 201 202# Do we want the config file compiled into the kernel? 203INCLUDE_CONFIG_FILE opt_config.h 204 205# Options for static filesystems. These should only be used at config 206# time, since the corresponding lkms cannot work if there are any static 207# dependencies. Unusability is enforced by hiding the defines for the 208# options in a never-included header. 209CD9660 opt_dontuse.h 210CODA opt_dontuse.h 211EXT2FS opt_dontuse.h 212FDESCFS opt_dontuse.h 213FFS opt_dontuse.h 214HPFS opt_dontuse.h 215MSDOSFS opt_dontuse.h 216NTFS opt_dontuse.h 217NULLFS opt_dontuse.h 218NWFS opt_dontuse.h 219PORTALFS opt_dontuse.h 220PROCFS opt_dontuse.h 221PSEUDOFS opt_dontuse.h 222REISERFS opt_dontuse.h 223SMBFS opt_dontuse.h 224TMPFS opt_dontuse.h 225UDF opt_dontuse.h 226UNIONFS opt_dontuse.h 227 228# Pseudofs debugging 229PSEUDOFS_TRACE opt_pseudofs.h 230 231# In-kernel GSS-API 232KGSSAPI opt_kgssapi.h 233KGSSAPI_DEBUG opt_kgssapi.h 234 235# These static filesystems have one slightly bogus static dependency in 236# sys/i386/i386/autoconf.c. If any of these filesystems are 237# statically compiled into the kernel, code for mounting them as root 238# filesystems will be enabled - but look below. 239NFSCLIENT opt_nfs.h 240NFSSERVER opt_nfs.h 241 242# Use these options to compile the experimental nfs client and/or 243# server that supports NFSv4 into a kernel. 244# NFSCL - client 245# NFSD - server 246NFSCL opt_nfs.h 247NFSD opt_nfs.h 248 249# filesystems and libiconv bridge 250CD9660_ICONV opt_dontuse.h 251MSDOSFS_ICONV opt_dontuse.h 252NTFS_ICONV opt_dontuse.h 253UDF_ICONV opt_dontuse.h 254 255# If you are following the conditions in the copyright, 256# you can enable soft-updates which will speed up a lot of thigs 257# and make the system safer from crashes at the same time. 258# otherwise a STUB module will be compiled in. 259SOFTUPDATES opt_ffs.h 260 261# On small, embedded systems, it can be useful to turn off support for 262# snapshots. It saves about 30-40k for a feature that would be lightly 263# used, if it is used at all. 264NO_FFS_SNAPSHOT opt_ffs.h 265 266# Enabling this option turns on support for Access Control Lists in UFS, 267# which can be used to support high security configurations. Depends on 268# UFS_EXTATTR. 269UFS_ACL opt_ufs.h 270 271# Enabling this option turns on support for extended attributes in UFS-based 272# filesystems, which can be used to support high security configurations 273# as well as new filesystem features. 274UFS_EXTATTR opt_ufs.h 275UFS_EXTATTR_AUTOSTART opt_ufs.h 276 277# Enable fast hash lookups for large directories on UFS-based filesystems. 278UFS_DIRHASH opt_ufs.h 279 280# Enable gjournal-based UFS journal. 281UFS_GJOURNAL opt_ufs.h 282 283# The below sentence is not in English, and neither is this one. 284# We plan to remove the static dependences above, with a 285# <filesystem>_ROOT option to control if it usable as root. This list 286# allows these options to be present in config files already (though 287# they won't make any difference yet). 288NFS_ROOT opt_nfsroot.h 289 290# SMB/CIFS requester 291NETSMB opt_netsmb.h 292 293# Options used only in subr_param.c. 294HZ opt_param.h 295MAXFILES opt_param.h 296NBUF opt_param.h 297NSFBUFS opt_param.h 298VM_BCACHE_SIZE_MAX opt_param.h 299VM_SWZONE_SIZE_MAX opt_param.h 300MAXUSERS 301DFLDSIZ opt_param.h 302MAXDSIZ opt_param.h 303MAXSSIZ opt_param.h 304 305# Generic SCSI options. 306CAM_MAX_HIGHPOWER opt_cam.h 307CAMDEBUG opt_cam.h 308CAM_DEBUG_DELAY opt_cam.h 309CAM_DEBUG_BUS opt_cam.h 310CAM_DEBUG_TARGET opt_cam.h 311CAM_DEBUG_LUN opt_cam.h 312CAM_DEBUG_FLAGS opt_cam.h 313SCSI_DELAY opt_scsi.h 314SCSI_NO_SENSE_STRINGS opt_scsi.h 315SCSI_NO_OP_STRINGS opt_scsi.h 316 317# Options used only in cam/ata/ata_da.c 318ADA_TEST_FAILURE opt_ada.h 319 320# Options used only in cam/scsi/scsi_cd.c 321CHANGER_MIN_BUSY_SECONDS opt_cd.h 322CHANGER_MAX_BUSY_SECONDS opt_cd.h 323 324# Options used only in cam/scsi/scsi_sa.c. 325SA_IO_TIMEOUT opt_sa.h 326SA_SPACE_TIMEOUT opt_sa.h 327SA_REWIND_TIMEOUT opt_sa.h 328SA_ERASE_TIMEOUT opt_sa.h 329SA_1FM_AT_EOD opt_sa.h 330 331# Options used only in cam/scsi/scsi_pt.c 332SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 333 334# Options used only in cam/scsi/scsi_ses.c 335SES_ENABLE_PASSTHROUGH opt_ses.h 336 337# Options used in dev/sym/ (Symbios SCSI driver). 338SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 339 # Allows the ncr to take precedence 340 # 1 (1<<0) -> 810a, 860 341 # 2 (1<<1) -> 825a, 875, 885, 895 342 # 4 (1<<2) -> 895a, 896, 1510d 343SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 344 # disabled:0 (default), enabled:1 345SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 346 # disabled:0, enabled:1 (default) 347SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 348 # default:8, range:[1..64] 349 350# Options used only in pci/ncr.c 351SCSI_NCR_DEBUG opt_ncr.h 352SCSI_NCR_MAX_SYNC opt_ncr.h 353SCSI_NCR_MAX_WIDE opt_ncr.h 354SCSI_NCR_MYADDR opt_ncr.h 355 356# Options used only in dev/isp/* 357ISP_TARGET_MODE opt_isp.h 358ISP_FW_CRASH_DUMP opt_isp.h 359ISP_DEFAULT_ROLES opt_isp.h 360ISP_INTERNAL_TARGET opt_isp.h 361 362# Options used only in dev/iscsi 363ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 364 365# Options used in the 'ata' ATA/ATAPI driver 366ATA_STATIC_ID opt_ata.h 367ATA_NOPCI opt_ata.h 368ATA_REQUEST_TIMEOUT opt_ata.h 369ATA_CAM opt_ata.h 370 371# Net stuff. 372ACCEPT_FILTER_DATA 373ACCEPT_FILTER_DNS 374ACCEPT_FILTER_HTTP 375ALTQ opt_global.h 376ALTQ_CBQ opt_altq.h 377ALTQ_CDNR opt_altq.h 378ALTQ_DEBUG opt_altq.h 379ALTQ_HFSC opt_altq.h 380ALTQ_NOPCC opt_altq.h 381ALTQ_PRIQ opt_altq.h 382ALTQ_RED opt_altq.h 383ALTQ_RIO opt_altq.h 384BOOTP opt_bootp.h 385BOOTP_BLOCKSIZE opt_bootp.h 386BOOTP_COMPAT opt_bootp.h 387BOOTP_NFSROOT opt_bootp.h 388BOOTP_NFSV3 opt_bootp.h 389BOOTP_WIRED_TO opt_bootp.h 390DEVICE_POLLING 391DEV_ENC opt_enc.h 392DEV_PF opt_pf.h 393DEV_PFLOG opt_pf.h 394DEV_PFSYNC opt_pf.h 395DEV_VLAN opt_vlan.h 396DUMMYNET opt_ipdn.h 397ETHER_8022 opt_ef.h 398ETHER_8023 opt_ef.h 399ETHER_II opt_ef.h 400ETHER_SNAP opt_ef.h 401INET opt_inet.h 402INET6 opt_inet6.h 403IPDIVERT 404IPFILTER opt_ipfilter.h 405IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 406IPFILTER_LOG opt_ipfilter.h 407IPFILTER_LOOKUP opt_ipfilter.h 408IPFIREWALL opt_ipfw.h 409IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 410IPFIREWALL_FORWARD opt_ipfw.h 411IPFIREWALL_NAT opt_ipfw.h 412IPFIREWALL_VERBOSE opt_ipfw.h 413IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 414IPSEC opt_ipsec.h 415IPSEC_DEBUG opt_ipsec.h 416IPSEC_FILTERTUNNEL opt_ipsec.h 417IPSEC_NAT_T opt_ipsec.h 418IPSTEALTH 419IPX 420KRPC 421LIBALIAS 422LIBMBPOOL 423LIBMCHAIN 424MBUF_PROFILING 425MBUF_STRESS_TEST 426MROUTING opt_mrouting.h 427NCP 428NETATALK opt_atalk.h 429NFSLOCKD 430PCBGROUP opt_pcbgroup.h 431RADIX_MPATH opt_mpath.h 432ROUTETABLES opt_route.h 433SLIP_IFF_OPTS opt_slip.h 434TCPDEBUG 435TCP_OFFLOAD_DISABLE opt_inet.h #Disable code to dispatch tcp offloading 436TCP_SIGNATURE opt_inet.h 437VLAN_ARRAY opt_vlan.h 438XBONEHACK 439FLOWTABLE opt_route.h 440 441# 442# SCTP 443# 444SCTP opt_sctp.h 445SCTP_DEBUG opt_sctp.h # Enable debug printfs 446SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril 447SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 448SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 449SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 450SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 451SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 452SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 453SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 454SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 455# 456# 457# 458 459# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 460# Each netgraph node type can be either be compiled into the kernel 461# or loaded dynamically. To get the former, include the corresponding 462# option below. Each type has its own man page, e.g. ng_async(4). 463NETGRAPH 464NETGRAPH_DEBUG opt_netgraph.h 465NETGRAPH_ASYNC opt_netgraph.h 466NETGRAPH_ATMLLC opt_netgraph.h 467NETGRAPH_ATM_ATMPIF opt_netgraph.h 468NETGRAPH_BLUETOOTH opt_netgraph.h 469NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 470NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 471NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 472NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 473NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 474NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 475NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 476NETGRAPH_BPF opt_netgraph.h 477NETGRAPH_BRIDGE opt_netgraph.h 478NETGRAPH_CAR opt_netgraph.h 479NETGRAPH_CISCO opt_netgraph.h 480NETGRAPH_DEFLATE opt_netgraph.h 481NETGRAPH_DEVICE opt_netgraph.h 482NETGRAPH_ECHO opt_netgraph.h 483NETGRAPH_EIFACE opt_netgraph.h 484NETGRAPH_ETHER opt_netgraph.h 485NETGRAPH_ETHER_ECHO opt_netgraph.h 486NETGRAPH_FEC opt_netgraph.h 487NETGRAPH_FRAME_RELAY opt_netgraph.h 488NETGRAPH_GIF opt_netgraph.h 489NETGRAPH_GIF_DEMUX opt_netgraph.h 490NETGRAPH_HOLE opt_netgraph.h 491NETGRAPH_IFACE opt_netgraph.h 492NETGRAPH_IP_INPUT opt_netgraph.h 493NETGRAPH_IPFW opt_netgraph.h 494NETGRAPH_KSOCKET opt_netgraph.h 495NETGRAPH_L2TP opt_netgraph.h 496NETGRAPH_LMI opt_netgraph.h 497# MPPC compression requires proprietary files (not included) 498NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 499NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 500NETGRAPH_NAT opt_netgraph.h 501NETGRAPH_NETFLOW opt_netgraph.h 502NETGRAPH_ONE2MANY opt_netgraph.h 503NETGRAPH_PATCH opt_netgraph.h 504NETGRAPH_PIPE opt_netgraph.h 505NETGRAPH_PPP opt_netgraph.h 506NETGRAPH_PPPOE opt_netgraph.h 507NETGRAPH_PPTPGRE opt_netgraph.h 508NETGRAPH_PRED1 opt_netgraph.h 509NETGRAPH_RFC1490 opt_netgraph.h 510NETGRAPH_SOCKET opt_netgraph.h 511NETGRAPH_SPLIT opt_netgraph.h 512NETGRAPH_SPPP opt_netgraph.h 513NETGRAPH_TAG opt_netgraph.h 514NETGRAPH_TCPMSS opt_netgraph.h 515NETGRAPH_TEE opt_netgraph.h 516NETGRAPH_TTY opt_netgraph.h 517NETGRAPH_UI opt_netgraph.h 518NETGRAPH_VJC opt_netgraph.h 519NETGRAPH_VLAN opt_netgraph.h 520 521# NgATM options 522NGATM_ATM opt_netgraph.h 523NGATM_ATMBASE opt_netgraph.h 524NGATM_SSCOP opt_netgraph.h 525NGATM_SSCFU opt_netgraph.h 526NGATM_UNI opt_netgraph.h 527NGATM_CCATM opt_netgraph.h 528 529# DRM options 530DRM_DEBUG opt_drm.h 531 532ZERO_COPY_SOCKETS opt_zero.h 533TI_SF_BUF_JUMBO opt_ti.h 534TI_JUMBO_HDRSPLIT opt_ti.h 535BCE_JUMBO_HDRSPLIT opt_bce.h 536 537# XXX Conflict: # of devices vs network protocol (Native ATM). 538# This makes "atm.h" unusable. 539NATM 540 541# DPT driver debug flags 542DPT_MEASURE_PERFORMANCE opt_dpt.h 543DPT_HANDLE_TIMEOUTS opt_dpt.h 544DPT_TIMEOUT_FACTOR opt_dpt.h 545DPT_LOST_IRQ opt_dpt.h 546DPT_RESET_HBA opt_dpt.h 547 548# Misc debug flags. Most of these should probably be replaced with 549# 'DEBUG', and then let people recompile just the interesting modules 550# with 'make CC="cc -DDEBUG"'. 551CLUSTERDEBUG opt_debug_cluster.h 552DEBUG_1284 opt_ppb_1284.h 553VP0_DEBUG opt_vpo.h 554LPT_DEBUG opt_lpt.h 555PLIP_DEBUG opt_plip.h 556LOCKF_DEBUG opt_debug_lockf.h 557NETATALKDEBUG opt_atalk.h 558SI_DEBUG opt_debug_si.h 559 560# Fb options 561FB_DEBUG opt_fb.h 562FB_INSTALL_CDEV opt_fb.h 563 564# ppbus related options 565PERIPH_1284 opt_ppb_1284.h 566DONTPROBE_1284 opt_ppb_1284.h 567 568# smbus related options 569ENABLE_ALART opt_intpm.h 570 571# These cause changes all over the kernel 572BLKDEV_IOSIZE opt_global.h 573BURN_BRIDGES opt_global.h 574DEBUG opt_global.h 575DEBUG_LOCKS opt_global.h 576DEBUG_VFS_LOCKS opt_global.h 577DFLTPHYS opt_global.h 578DIAGNOSTIC opt_global.h 579INVARIANT_SUPPORT opt_global.h 580INVARIANTS opt_global.h 581MAXCPU opt_global.h 582MAXPHYS opt_global.h 583MCLSHIFT opt_global.h 584MUTEX_DEBUG opt_global.h 585MUTEX_NOINLINE opt_global.h 586LOCK_PROFILING opt_global.h 587LOCK_PROFILING_FAST opt_global.h 588MSIZE opt_global.h 589REGRESSION opt_global.h 590RWLOCK_NOINLINE opt_global.h 591SX_NOINLINE opt_global.h 592VFS_BIO_DEBUG opt_global.h 593 594# These are VM related options 595VM_KMEM_SIZE opt_vm.h 596VM_KMEM_SIZE_SCALE opt_vm.h 597VM_KMEM_SIZE_MAX opt_vm.h 598VM_NRESERVLEVEL opt_vm.h 599VM_LEVEL_0_ORDER opt_vm.h 600NO_SWAPPING opt_vm.h 601MALLOC_MAKE_FAILURES opt_vm.h 602MALLOC_PROFILE opt_vm.h 603MALLOC_DEBUG_MAXZONES opt_vm.h 604 605# The MemGuard replacement allocator used for tamper-after-free detection 606DEBUG_MEMGUARD opt_vm.h 607 608# The RedZone malloc(9) protection 609DEBUG_REDZONE opt_vm.h 610 611# Standard SMP options 612SMP opt_global.h 613 614# Size of the kernel message buffer 615MSGBUF_SIZE opt_msgbuf.h 616 617# NFS options 618NFS_MINATTRTIMO opt_nfs.h 619NFS_MAXATTRTIMO opt_nfs.h 620NFS_MINDIRATTRTIMO opt_nfs.h 621NFS_MAXDIRATTRTIMO opt_nfs.h 622NFS_GATHERDELAY opt_nfs.h 623NFS_WDELAYHASHSIZ opt_nfs.h 624NFS_DEBUG opt_nfs.h 625 626# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 627OVERRIDE_CARD opt_bktr.h 628OVERRIDE_TUNER opt_bktr.h 629OVERRIDE_DBX opt_bktr.h 630OVERRIDE_MSP opt_bktr.h 631BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 632BROOKTREE_ALLOC_PAGES opt_bktr.h 633BKTR_OVERRIDE_CARD opt_bktr.h 634BKTR_OVERRIDE_TUNER opt_bktr.h 635BKTR_OVERRIDE_DBX opt_bktr.h 636BKTR_OVERRIDE_MSP opt_bktr.h 637BKTR_SYSTEM_DEFAULT opt_bktr.h 638BKTR_ALLOC_PAGES opt_bktr.h 639BKTR_USE_PLL opt_bktr.h 640BKTR_GPIO_ACCESS opt_bktr.h 641BKTR_NO_MSP_RESET opt_bktr.h 642BKTR_430_FX_MODE opt_bktr.h 643BKTR_SIS_VIA_MODE opt_bktr.h 644BKTR_USE_FREEBSD_SMBUS opt_bktr.h 645BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 646 647# Options to support PPS 648UART_PPS_ON_CTS opt_uart.h 649 650# options for bus/device framework 651BUS_DEBUG opt_bus.h 652 653# options for USB support 654USB_DEBUG opt_usb.h 655USB_HOST_ALIGN opt_usb.h 656USB_REQ_DEBUG opt_usb.h 657USB_VERBOSE opt_usb.h 658USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 659U3G_DEBUG opt_u3g.h 660UKBD_DFLT_KEYMAP opt_ukbd.h 661UPLCOM_INTR_INTERVAL opt_uplcom.h 662UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 663UVSCOM_INTR_INTERVAL opt_uvscom.h 664 665# Embedded system options 666INIT_PATH 667 668ROOTDEVNAME 669 670FDC_DEBUG opt_fdc.h 671PCFCLOCK_VERBOSE opt_pcfclock.h 672PCFCLOCK_MAX_RETRIES opt_pcfclock.h 673 674KTR opt_global.h 675KTR_ALQ opt_ktr.h 676KTR_MASK opt_ktr.h 677KTR_CPUMASK opt_ktr.h 678KTR_COMPILE opt_global.h 679KTR_ENTRIES opt_global.h 680KTR_VERBOSE opt_ktr.h 681WITNESS opt_global.h 682WITNESS_KDB opt_witness.h 683WITNESS_SKIPSPIN opt_witness.h 684 685# options for ACPI support 686ACPI_DEBUG opt_acpi.h 687ACPI_MAX_TASKS opt_acpi.h 688ACPI_MAX_THREADS opt_acpi.h 689 690# ISA support 691DEV_ISA opt_isa.h 692ISAPNP opt_isa.h 693 694# various 'device presence' options. 695DEV_BPF opt_bpf.h 696DEV_NETMAP opt_global.h 697DEV_MCA opt_mca.h 698DEV_CARP opt_carp.h 699DEV_SPLASH opt_splash.h 700 701# EISA support 702DEV_EISA opt_eisa.h 703EISA_SLOTS opt_eisa.h 704 705# ed driver 706ED_HPP opt_ed.h 707ED_3C503 opt_ed.h 708ED_SIC opt_ed.h 709 710# bce driver 711BCE_DEBUG opt_bce.h 712BCE_NVRAM_WRITE_SUPPORT opt_bce.h 713 714# bxe driver 715BXE_DEBUG opt_bxe.h 716BXE_NVRAM_WRITE_SUPPORT opt_bxe.h 717 718SOCKBUF_DEBUG opt_global.h 719 720 721# options for ubsec driver 722UBSEC_DEBUG opt_ubsec.h 723UBSEC_RNDTEST opt_ubsec.h 724UBSEC_NO_RNG opt_ubsec.h 725 726# options for hifn driver 727HIFN_DEBUG opt_hifn.h 728HIFN_RNDTEST opt_hifn.h 729 730# options for safenet driver 731SAFE_DEBUG opt_safe.h 732SAFE_NO_RNG opt_safe.h 733SAFE_RNDTEST opt_safe.h 734 735# syscons options 736MAXCONS opt_syscons.h 737SC_ALT_MOUSE_IMAGE opt_syscons.h 738SC_CUT_SPACES2TABS opt_syscons.h 739SC_CUT_SEPCHARS opt_syscons.h 740SC_DEBUG_LEVEL opt_syscons.h 741SC_DFLT_FONT opt_syscons.h 742SC_DISABLE_KDBKEY opt_syscons.h 743SC_DISABLE_REBOOT opt_syscons.h 744SC_HISTORY_SIZE opt_syscons.h 745SC_KERNEL_CONS_ATTR opt_syscons.h 746SC_KERNEL_CONS_REV_ATTR opt_syscons.h 747SC_MOUSE_CHAR opt_syscons.h 748SC_NO_CUTPASTE opt_syscons.h 749SC_NO_FONT_LOADING opt_syscons.h 750SC_NO_HISTORY opt_syscons.h 751SC_NO_MODE_CHANGE opt_syscons.h 752SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 753SC_NO_SYSMOUSE opt_syscons.h 754SC_NORM_ATTR opt_syscons.h 755SC_NORM_REV_ATTR opt_syscons.h 756SC_PIXEL_MODE opt_syscons.h 757SC_RENDER_DEBUG opt_syscons.h 758SC_TWOBUTTON_MOUSE opt_syscons.h 759 760# teken terminal emulator options 761TEKEN_CONS25 opt_teken.h 762TEKEN_UTF8 opt_teken.h 763 764# options for printf 765PRINTF_BUFR_SIZE opt_printf.h 766 767# kbd options 768KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 769KBD_INSTALL_CDEV opt_kbd.h 770KBD_MAXRETRY opt_kbd.h 771KBD_MAXWAIT opt_kbd.h 772KBD_RESETDELAY opt_kbd.h 773KBDIO_DEBUG opt_kbd.h 774 775# options for the Atheros driver 776ATH_DEBUG opt_ath.h 777ATH_TXBUF opt_ath.h 778ATH_RXBUF opt_ath.h 779ATH_DIAGAPI opt_ath.h 780ATH_TX99_DIAG opt_ath.h 781ATH_ENABLE_11N opt_ath.h 782ATH_ENABLE_DFS opt_ath.h 783 784# options for the Atheros hal 785AH_SUPPORT_AR5416 opt_ah.h 786# XXX For now, this breaks non-AR9130 chipsets, so only use it 787# XXX when actually targetting AR9130. 788AH_SUPPORT_AR9130 opt_ah.h 789 790AH_DEBUG opt_ah.h 791AH_ASSERT opt_ah.h 792AH_DEBUG_ALQ opt_ah.h 793AH_REGOPS_FUNC opt_ah.h 794AH_WRITE_REGDOMAIN opt_ah.h 795AH_DEBUG_COUNTRY opt_ah.h 796AH_WRITE_EEPROM opt_ah.h 797AH_PRIVATE_DIAG opt_ah.h 798AH_NEED_DESC_SWAP opt_ah.h 799AH_USE_INIPDGAIN opt_ah.h 800AH_MAXCHAN opt_ah.h 801AH_RXCFG_SDMAMW_4BYTES opt_ah.h 802 803# AR5416 and later interrupt mitigation 804# XXX do not use this for AR9130 805AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 806 807# options for the Broadcom BCM43xx driver (bwi) 808BWI_DEBUG opt_bwi.h 809BWI_DEBUG_VERBOSE opt_bwi.h 810 811# options for the Marvell 8335 wireless driver 812MALO_DEBUG opt_malo.h 813MALO_TXBUF opt_malo.h 814MALO_RXBUF opt_malo.h 815 816# options for the Marvell wireless driver 817MWL_DEBUG opt_mwl.h 818MWL_TXBUF opt_mwl.h 819MWL_RXBUF opt_mwl.h 820MWL_DIAGAPI opt_mwl.h 821MWL_AGGR_SIZE opt_mwl.h 822MWL_TX_NODROP opt_mwl.h 823 824# dcons options 825DCONS_BUF_SIZE opt_dcons.h 826DCONS_POLL_HZ opt_dcons.h 827DCONS_FORCE_CONSOLE opt_dcons.h 828DCONS_FORCE_GDB opt_dcons.h 829 830# HWPMC options 831HWPMC_HOOKS 832HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h 833 834# XBOX options for FreeBSD/i386, but some files are MI 835XBOX opt_xbox.h 836 837# XFS 838XFS 839 840ZFS opt_dontuse.h 841 842# Interrupt filtering 843INTR_FILTER 844 845# 802.11 support layer 846IEEE80211_DEBUG opt_wlan.h 847IEEE80211_DEBUG_REFCNT opt_wlan.h 848IEEE80211_AMPDU_AGE opt_wlan.h 849IEEE80211_SUPPORT_MESH opt_wlan.h 850IEEE80211_SUPPORT_SUPERG opt_wlan.h 851IEEE80211_SUPPORT_TDMA opt_wlan.h 852IEEE80211_ALQ opt_wlan.h 853IEEE80211_DFS_DEBUG opt_wlan.h 854 855# 802.11 TDMA support 856TDMA_SLOTLEN_DEFAULT opt_tdma.h 857TDMA_SLOTCNT_DEFAULT opt_tdma.h 858TDMA_BINTVAL_DEFAULT opt_tdma.h 859TDMA_TXRATE_11B_DEFAULT opt_tdma.h 860TDMA_TXRATE_11G_DEFAULT opt_tdma.h 861TDMA_TXRATE_11A_DEFAULT opt_tdma.h 862TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 863TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 864TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 865TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 866TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 867 868# Network stack virtualization options 869VIMAGE opt_global.h 870VNET_DEBUG opt_global.h 871 872# Common Flash Interface (CFI) options 873CFI_SUPPORT_STRATAFLASH opt_cfi.h 874CFI_ARMEDANDDANGEROUS opt_cfi.h 875 876# Sound options 877SND_DEBUG opt_snd.h 878SND_DIAGNOSTIC opt_snd.h 879SND_FEEDER_MULTIFORMAT opt_snd.h 880SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 881SND_FEEDER_RATE_HP opt_snd.h 882SND_PCM_64 opt_snd.h 883SND_OLDSTEREO opt_snd.h 884 885X86BIOS 886 887# Flattened device tree options 888FDT opt_platform.h 889FDT_DTB_STATIC opt_platform.h 890 891# OFED Infiniband stack 892OFED opt_ofed.h 893OFED_DEBUG_INIT opt_ofed.h 894SDP opt_ofed.h 895SDP_DEBUG opt_ofed.h 896IPOIB opt_ofed.h 897IPOIB_DEBUG opt_ofed.h 898IPOIB_CM opt_ofed.h 899 900# Resource Accounting 901RACCT opt_global.h 902 903# Resource Limits 904RCTL opt_global.h 905 906# At least one of the AR71XX ubiquiti boards has a Redboot configuration 907# that "lies" about the amount of RAM it has. Until a cleaner method is 908# defined, this option will suffice in overriding what Redboot says. 909AR71XX_REALMEM opt_ar71xx.h 910AR71XX_ENV_UBOOT opt_ar71xx.h 911AR71XX_ENV_REDBOOT opt_ar71xx.h 912AR71XX_ATH_EEPROM opt_ar71xx.h 913