xref: /freebsd/sys/conf/options (revision 3d11b6c8f01e1fca5936a11d6996448467851a94)
1# $FreeBSD$
2#
3#        On the handling of kernel options
4#
5# All kernel options should be listed in NOTES, with suitable
6# descriptions.  Negative options (options that make some code not
7# compile) should be commented out; LINT (generated from NOTES) should
8# compile as much code as possible.  Try to structure option-using
9# code so that a single option only switch code on, or only switch
10# code off, to make it possible to have a full compile-test.  If
11# necessary, you can check for COMPILING_LINT to get maximum code
12# coverage.
13#
14# All new options shall also be listed in either "conf/options" or
15# "conf/options.<machine>".  Options that affect a single source-file
16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17# that affect multiple files should either go in "opt_global.h" if
18# this is a kernel-wide option (used just about everywhere), or in
19# "opt_<option-name-in-lower-case>.h" if it affect only some files.
20# Note that the effect of listing only an option without a
21# header-file-name in conf/options (and cousins) is that the last
22# convention is followed.
23#
24# This handling scheme is not yet fully implemented.
25#
26#
27# Format of this file:
28# Option name	filename
29#
30# If filename is missing, the default is
31# opt_<name-of-option-in-lower-case>.h
32
33AAC_DEBUG		opt_aac.h
34AHC_ALLOW_MEMIO		opt_aic7xxx.h
35AHC_TMODE_ENABLE	opt_aic7xxx.h
36AHC_DUMP_EEPROM		opt_aic7xxx.h
37AHC_DEBUG		opt_aic7xxx.h
38AHC_DEBUG_OPTS		opt_aic7xxx.h
39AHC_REG_PRETTY_PRINT    opt_aic7xxx.h
40AHD_DEBUG		opt_aic79xx.h
41AHD_DEBUG_OPTS		opt_aic79xx.h
42AHD_TMODE_ENABLE	opt_aic79xx.h
43AHD_REG_PRETTY_PRINT	opt_aic79xx.h
44ADW_ALLOW_MEMIO		opt_adw.h
45
46TWA_DEBUG		opt_twa.h
47TWA_FLASH_FIRMWARE	opt_twa.h
48
49# Debugging options.
50DDB
51DDB_NUMSYM	opt_ddb.h
52GDB
53GDBSPEED	opt_gdb.h
54KDB		opt_global.h
55KDB_TRACE	opt_kdb.h
56KDB_UNATTENDED	opt_kdb.h
57SYSCTL_DEBUG	opt_sysctl.h
58
59# Miscellaneous options.
60ADAPTIVE_GIANT	opt_adaptive_mutexes.h
61NO_ADAPTIVE_MUTEXES	opt_adaptive_mutexes.h
62ALQ
63AUDIT		opt_global.h
64CODA_COMPAT_5	opt_coda.h
65COMPAT_43	opt_compat.h
66COMPAT_43TTY	opt_compat.h
67COMPAT_FREEBSD4	opt_compat.h
68COMPAT_FREEBSD5	opt_compat.h
69COMPILING_LINT	opt_global.h
70CONSPEED	opt_comconsole.h
71CY_PCI_FASTINTR
72DIRECTIO
73FULL_PREEMPTION	opt_sched.h
74IPI_PREEMPTION	opt_sched.h
75GEOM_AES	opt_geom.h
76GEOM_APPLE	opt_geom.h
77GEOM_BDE	opt_geom.h
78GEOM_BSD	opt_geom.h
79GEOM_CONCAT	opt_geom.h
80GEOM_ELI	opt_geom.h
81GEOM_FOX	opt_geom.h
82GEOM_GATE	opt_geom.h
83GEOM_GPT	opt_geom.h
84GEOM_LABEL	opt_geom.h
85GEOM_MBR	opt_geom.h
86GEOM_MIRROR	opt_geom.h
87GEOM_NOP	opt_geom.h
88GEOM_PC98	opt_geom.h
89GEOM_RAID3	opt_geom.h
90GEOM_SHSEC	opt_geom.h
91GEOM_STRIPE	opt_geom.h
92GEOM_SUNLABEL	opt_geom.h
93GEOM_UZIP	opt_geom.h
94GEOM_VOL	opt_geom.h
95GEOM_ZERO	opt_geom.h
96KSTACK_MAX_PAGES
97KSTACK_PAGES
98KTRACE
99KTRACE_REQUEST_POOL	opt_ktrace.h
100LIBICONV
101MAC
102MAC_ALWAYS_LABEL_MBUF	opt_mac.h
103MAC_BIBA	opt_dontuse.h
104MAC_BSDEXTENDED	opt_dontuse.h
105MAC_DEBUG	opt_mac.h
106MAC_IFOFF	opt_dontuse.h
107MAC_LOMAC	opt_dontuse.h
108MAC_MLS		opt_dontuse.h
109MAC_NONE	opt_dontuse.h
110MAC_PARTITION	opt_dontuse.h
111MAC_PORTACL	opt_dontuse.h
112MAC_SEEOTHERUIDS	opt_dontuse.h
113MAC_STATIC	opt_mac.h
114MAC_STUB	opt_dontuse.h
115MAC_TEST	opt_dontuse.h
116MD_ROOT		opt_md.h
117MD_ROOT_SIZE	opt_md.h
118MFI_DEBUG	opt_mfi.h
119MPROF_BUFFERS	opt_mprof.h
120MPROF_HASH_SIZE	opt_mprof.h
121MUTEX_WAKE_ALL
122NSWBUF_MIN	opt_swap.h
123PANIC_REBOOT_WAIT_TIME	opt_panic.h
124PPS_SYNC	opt_ntp.h
125PREEMPTION	opt_sched.h
126PUC_FASTINTR	opt_puc.h
127QUOTA
128SCHED_4BSD	opt_sched.h
129SCHED_ULE	opt_sched.h
130SHOW_BUSYBUFS
131SLEEPQUEUE_PROFILING
132SLHCI_DEBUG	opt_slhci.h
133SPX_HACK
134SUIDDIR
135MSGMNB		opt_sysvipc.h
136MSGMNI		opt_sysvipc.h
137MSGSEG		opt_sysvipc.h
138MSGSSZ		opt_sysvipc.h
139MSGTQL		opt_sysvipc.h
140SEMMAP		opt_sysvipc.h
141SEMMNI		opt_sysvipc.h
142SEMMNS		opt_sysvipc.h
143SEMMNU		opt_sysvipc.h
144SEMMSL		opt_sysvipc.h
145SEMOPM		opt_sysvipc.h
146SEMUME		opt_sysvipc.h
147SHMALL		opt_sysvipc.h
148SHMMAX		opt_sysvipc.h
149SHMMAXPGS	opt_sysvipc.h
150SHMMIN		opt_sysvipc.h
151SHMMNI		opt_sysvipc.h
152SHMSEG		opt_sysvipc.h
153SYSVMSG		opt_sysvipc.h
154SYSVSEM		opt_sysvipc.h
155SYSVSHM		opt_sysvipc.h
156SW_WATCHDOG	opt_watchdog.h
157TURNSTILE_PROFILING
158TTYHOG		opt_tty.h
159VFS_AIO
160WLCACHE		opt_wavelan.h
161WLDEBUG		opt_wavelan.h
162
163# POSIX kernel options
164P1003_1B_MQUEUE			opt_posix.h
165P1003_1B_SEMAPHORES		opt_posix.h
166_KPOSIX_PRIORITY_SCHEDULING	opt_posix.h
167
168# Do we want the config file compiled into the kernel?
169INCLUDE_CONFIG_FILE	opt_config.h
170
171# Options for static filesystems.  These should only be used at config
172# time, since the corresponding lkms cannot work if there are any static
173# dependencies.  Unusability is enforced by hiding the defines for the
174# options in a never-included header.
175CD9660		opt_dontuse.h
176CODA		opt_dontuse.h
177EXT2FS		opt_dontuse.h
178FDESCFS		opt_dontuse.h
179HPFS		opt_dontuse.h
180LINPROCFS	opt_dontuse.h
181MSDOSFS		opt_dontuse.h
182NTFS		opt_dontuse.h
183NULLFS		opt_dontuse.h
184NWFS		opt_dontuse.h
185PORTALFS	opt_dontuse.h
186PROCFS		opt_dontuse.h
187PSEUDOFS	opt_dontuse.h
188REISERFS	opt_dontuse.h
189SMBFS		opt_dontuse.h
190UDF		opt_dontuse.h
191UMAPFS		opt_dontuse.h
192UNIONFS		opt_dontuse.h
193
194# Pseudofs debugging
195PSEUDOFS_TRACE	opt_pseudofs.h
196
197# Broken - ffs_snapshot() dependency from ufs_lookup() :-(
198FFS		opt_ffs_broken_fixme.h
199
200# These static filesystems have one slightly bogus static dependency in
201# sys/i386/i386/autoconf.c.  If any of these filesystems are
202# statically compiled into the kernel, code for mounting them as root
203# filesystems will be enabled - but look below.
204NFSCLIENT	opt_nfs.h
205NFSSERVER	opt_nfs.h
206
207# filesystems and libiconv bridge
208CD9660_ICONV	opt_dontuse.h
209MSDOSFS_ICONV	opt_dontuse.h
210NTFS_ICONV	opt_dontuse.h
211UDF_ICONV	opt_dontuse.h
212
213# If you are following the conditions in the copyright,
214# you can enable soft-updates which will speed up a lot of thigs
215# and make the system safer from crashes at the same time.
216# otherwise a STUB module will be compiled in.
217SOFTUPDATES	opt_ffs.h
218
219# On small, embedded systems, it can be useful to turn off support for
220# snapshots.  It saves about 30-40k for a feature that would be lightly
221# used, if it is used at all.
222NO_FFS_SNAPSHOT	opt_ffs.h
223
224# Enabling this option turns on support for Access Control Lists in UFS,
225# which can be used to support high security configurations.  Depends on
226# UFS_EXTATTR.
227UFS_ACL		opt_ufs.h
228
229# Enabling this option turns on support for extended attributes in UFS-based
230# filesystems, which can be used to support high security configurations
231# as well as new filesystem features.
232UFS_EXTATTR	opt_ufs.h
233UFS_EXTATTR_AUTOSTART	opt_ufs.h
234
235# Enable fast hash lookups for large directories on UFS-based filesystems.
236UFS_DIRHASH	opt_ufs.h
237
238# The below sentence is not in English, and neither is this one.
239# We plan to remove the static dependences above, with a
240# <filesystem>_ROOT option to control if it usable as root.  This list
241# allows these options to be present in config files already (though
242# they won't make any difference yet).
243NFS_ROOT	opt_nfsroot.h
244
245# SMB/CIFS requester
246NETSMB		opt_netsmb.h
247
248# Experimental support for large MS-DOS filesystems; SEE WARNING IN "NOTES"!
249MSDOSFS_LARGE	opt_msdosfs.h
250
251# Options used only in subr_param.c.
252HZ		opt_param.h
253MAXFILES	opt_param.h
254NBUF		opt_param.h
255NMBCLUSTERS	opt_param.h
256NSFBUFS		opt_param.h
257VM_BCACHE_SIZE_MAX	opt_param.h
258VM_SWZONE_SIZE_MAX	opt_param.h
259MAXUSERS
260DFLDSIZ		opt_param.h
261MAXDSIZ		opt_param.h
262MAXSSIZ		opt_param.h
263
264# Generic SCSI options.
265CAM_MAX_HIGHPOWER	opt_cam.h
266CAMDEBUG		opt_cam.h
267CAM_DEBUG_DELAY		opt_cam.h
268CAM_DEBUG_BUS		opt_cam.h
269CAM_DEBUG_TARGET	opt_cam.h
270CAM_DEBUG_LUN		opt_cam.h
271CAM_DEBUG_FLAGS		opt_cam.h
272CAM_NEW_TRAN_CODE	opt_cam.h
273SCSI_DELAY		opt_scsi.h
274SCSI_NO_SENSE_STRINGS	opt_scsi.h
275SCSI_NO_OP_STRINGS	opt_scsi.h
276
277# Options used only in cam/scsi/scsi_cd.c
278CHANGER_MIN_BUSY_SECONDS	opt_cd.h
279CHANGER_MAX_BUSY_SECONDS	opt_cd.h
280
281# Options used only in cam/scsi/scsi_sa.c.
282SA_IO_TIMEOUT		opt_sa.h
283SA_SPACE_TIMEOUT	opt_sa.h
284SA_REWIND_TIMEOUT	opt_sa.h
285SA_ERASE_TIMEOUT	opt_sa.h
286SA_1FM_AT_EOD		opt_sa.h
287
288# Options used only in cam/scsi/scsi_pt.c
289SCSI_PT_DEFAULT_TIMEOUT	opt_pt.h
290
291# Options used only in cam/scsi/scsi_ses.c
292SES_ENABLE_PASSTHROUGH	opt_ses.h
293
294# Options used in dev/sym/ (Symbios SCSI driver).
295SYM_SETUP_LP_PROBE_MAP	opt_sym.h	#-Low Priority Probe Map (bits)
296					# Allows the ncr to take precedence
297					# 1 (1<<0) -> 810a, 860
298					# 2 (1<<1) -> 825a, 875, 885, 895
299					# 4 (1<<2) -> 895a, 896, 1510d
300SYM_SETUP_SCSI_DIFF	opt_sym.h	#-HVD support for 825a, 875, 885
301					# disabled:0 (default), enabled:1
302SYM_SETUP_PCI_PARITY	opt_sym.h	#-PCI parity checking
303					# disabled:0, enabled:1 (default)
304SYM_SETUP_MAX_LUN	opt_sym.h	#-Number of LUNs supported
305					# default:8, range:[1..64]
306
307# Options used only in pci/ncr.c
308SCSI_NCR_DEBUG		opt_ncr.h
309SCSI_NCR_MAX_SYNC	opt_ncr.h
310SCSI_NCR_MAX_WIDE	opt_ncr.h
311SCSI_NCR_MYADDR		opt_ncr.h
312
313# Options used only in dev/isp/*
314ISP_TARGET_MODE		opt_isp.h
315ISP_FW_CRASH_DUMP	opt_isp.h
316
317# Options used in the 'ata' ATA/ATAPI driver
318ATA_STATIC_ID		opt_ata.h
319ATA_NOPCI		opt_ata.h
320
321# Net stuff.
322ACCEPT_FILTER_DATA
323ACCEPT_FILTER_HTTP
324ALTQ			opt_global.h
325ALTQ_CBQ		opt_altq.h
326ALTQ_RED		opt_altq.h
327ALTQ_RIO		opt_altq.h
328ALTQ_HFSC		opt_altq.h
329ALTQ_CDNR		opt_altq.h
330ALTQ_PRIQ		opt_altq.h
331ALTQ_NOPCC		opt_altq.h
332ALTQ_DEBUG		opt_altq.h
333BOOTP			opt_bootp.h
334BOOTP_COMPAT		opt_bootp.h
335BOOTP_NFSROOT		opt_bootp.h
336BOOTP_NFSV3		opt_bootp.h
337BOOTP_WIRED_TO		opt_bootp.h
338DEVICE_POLLING
339DEV_PF			opt_pf.h
340DEV_PFLOG		opt_pf.h
341DEV_PFSYNC		opt_pf.h
342ETHER_II		opt_ef.h
343ETHER_8023		opt_ef.h
344ETHER_8022		opt_ef.h
345ETHER_SNAP		opt_ef.h
346MROUTING		opt_mrouting.h
347PIM			opt_mrouting.h
348INET			opt_inet.h
349INET6			opt_inet6.h
350IPSEC			opt_ipsec.h
351IPSEC_ESP		opt_ipsec.h
352IPSEC_DEBUG		opt_ipsec.h
353IPSEC_FILTERGIF		opt_ipsec.h
354FAST_IPSEC		opt_ipsec.h
355IPDIVERT
356DUMMYNET		opt_ipdn.h
357IPFILTER		opt_ipfilter.h
358IPFILTER_LOG		opt_ipfilter.h
359IPFILTER_LOOKUP		opt_ipfilter.h
360IPFILTER_DEFAULT_BLOCK	opt_ipfilter.h
361IPFIREWALL		opt_ipfw.h
362IPFIREWALL_VERBOSE	opt_ipfw.h
363IPFIREWALL_VERBOSE_LIMIT	opt_ipfw.h
364IPFIREWALL_DEFAULT_TO_ACCEPT	opt_ipfw.h
365IPFIREWALL_FORWARD	opt_ipfw.h
366IPFIREWALL_FORWARD_EXTENDED	opt_ipfw.h
367IPV6FIREWALL		opt_ip6fw.h
368IPV6FIREWALL_VERBOSE	opt_ip6fw.h
369IPV6FIREWALL_VERBOSE_LIMIT	opt_ip6fw.h
370IPV6FIREWALL_DEFAULT_TO_ACCEPT	opt_ip6fw.h
371IPSTEALTH
372IPX
373IPXIP			opt_ipx.h
374LIBMBPOOL
375LIBMCHAIN
376LIBALIAS
377MBUF_STRESS_TEST
378NCP
379NETATALK		opt_atalk.h
380NET_WITH_GIANT		opt_net.h
381PPP_BSDCOMP		opt_ppp.h
382PPP_DEFLATE		opt_ppp.h
383PPP_FILTER		opt_ppp.h
384SLIP_IFF_OPTS		opt_slip.h
385TCPDEBUG
386TCP_SIGNATURE		opt_inet.h
387TCP_SACK_DEBUG		opt_tcp_sack.h
388TCP_DROP_SYNFIN		opt_tcp_input.h
389DEV_VLAN		opt_vlan.h
390VLAN_ARRAY		opt_vlan.h
391XBONEHACK
392
393# Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
394# Each netgraph node type can be either be compiled into the kernel
395# or loaded dynamically. To get the former, include the corresponding
396# option below. Each type has its own man page, e.g. ng_async(4).
397NETGRAPH
398NETGRAPH_DEBUG		opt_netgraph.h
399NETGRAPH_ASYNC		opt_netgraph.h
400NETGRAPH_ATMLLC		opt_netgraph.h
401NETGRAPH_ATM_ATMPIF	opt_netgraph.h
402NETGRAPH_BLUETOOTH	opt_netgraph.h
403NETGRAPH_BLUETOOTH_BT3C	opt_netgraph.h
404NETGRAPH_BLUETOOTH_H4	opt_netgraph.h
405NETGRAPH_BLUETOOTH_HCI	opt_netgraph.h
406NETGRAPH_BLUETOOTH_L2CAP	opt_netgraph.h
407NETGRAPH_BLUETOOTH_SOCKET	opt_netgraph.h
408NETGRAPH_BLUETOOTH_UBT	opt_netgraph.h
409NETGRAPH_BLUETOOTH_UBTBCMFW	opt_netgraph.h
410NETGRAPH_BPF		opt_netgraph.h
411NETGRAPH_BRIDGE		opt_netgraph.h
412NETGRAPH_CISCO		opt_netgraph.h
413NETGRAPH_DEVICE		opt_netgraph.h
414NETGRAPH_ECHO		opt_netgraph.h
415NETGRAPH_EIFACE		opt_netgraph.h
416NETGRAPH_ETHER		opt_netgraph.h
417NETGRAPH_FEC		opt_netgraph.h
418NETGRAPH_FRAME_RELAY	opt_netgraph.h
419NETGRAPH_GIF		opt_netgraph.h
420NETGRAPH_GIF_DEMUX	opt_netgraph.h
421NETGRAPH_HOLE		opt_netgraph.h
422NETGRAPH_IFACE		opt_netgraph.h
423NETGRAPH_IP_INPUT	opt_netgraph.h
424NETGRAPH_IPFW		opt_netgraph.h
425NETGRAPH_KSOCKET	opt_netgraph.h
426NETGRAPH_L2TP		opt_netgraph.h
427NETGRAPH_LMI		opt_netgraph.h
428# MPPC compression requires proprietary files (not included)
429NETGRAPH_MPPC_COMPRESSION	opt_netgraph.h
430NETGRAPH_MPPC_ENCRYPTION	opt_netgraph.h
431NETGRAPH_NAT		opt_netgraph.h
432NETGRAPH_NETFLOW	opt_netgraph.h
433NETGRAPH_ONE2MANY	opt_netgraph.h
434NETGRAPH_PPP		opt_netgraph.h
435NETGRAPH_PPPOE		opt_netgraph.h
436NETGRAPH_PPTPGRE	opt_netgraph.h
437NETGRAPH_RFC1490	opt_netgraph.h
438NETGRAPH_SOCKET		opt_netgraph.h
439NETGRAPH_SPLIT		opt_netgraph.h
440NETGRAPH_SPPP		opt_netgraph.h
441NETGRAPH_TCPMSS		opt_netgraph.h
442NETGRAPH_TEE		opt_netgraph.h
443NETGRAPH_TTY		opt_netgraph.h
444NETGRAPH_UI		opt_netgraph.h
445NETGRAPH_VJC		opt_netgraph.h
446
447# NgATM options
448NGATM_ATM		opt_netgraph.h
449NGATM_ATMBASE		opt_netgraph.h
450NGATM_SSCOP		opt_netgraph.h
451NGATM_SSCFU		opt_netgraph.h
452NGATM_UNI		opt_netgraph.h
453NGATM_CCATM		opt_netgraph.h
454
455# DRM options
456DRM_DEBUG		opt_drm.h
457
458ZERO_COPY_SOCKETS	opt_zero.h
459TI_PRIVATE_JUMBOS	opt_ti.h
460TI_JUMBO_HDRSPLIT	opt_ti.h
461
462# ATM (HARP version)
463ATM_CORE		opt_atm.h
464ATM_IP			opt_atm.h
465ATM_SIGPVC		opt_atm.h
466ATM_SPANS		opt_atm.h
467ATM_UNI			opt_atm.h
468
469# XXX Conflict: # of devices vs network protocol (Native ATM).
470# This makes "atm.h" unusable.
471NATM
472
473# DPT driver debug flags
474DPT_MEASURE_PERFORMANCE	opt_dpt.h
475DPT_HANDLE_TIMEOUTS	opt_dpt.h
476DPT_TIMEOUT_FACTOR	opt_dpt.h
477DPT_LOST_IRQ		opt_dpt.h
478DPT_RESET_HBA		opt_dpt.h
479
480# Misc debug flags.  Most of these should probably be replaced with
481# 'DEBUG', and then let people recompile just the interesting modules
482# with 'make CC="cc -DDEBUG"'.
483CLUSTERDEBUG		opt_debug_cluster.h
484DEBUG_1284		opt_ppb_1284.h
485VP0_DEBUG		opt_vpo.h
486LPT_DEBUG		opt_lpt.h
487PLIP_DEBUG		opt_plip.h
488LOCKF_DEBUG		opt_debug_lockf.h
489NETATALKDEBUG		opt_atalk.h
490SI_DEBUG		opt_debug_si.h
491
492# Fb options
493FB_DEBUG		opt_fb.h
494FB_INSTALL_CDEV		opt_fb.h
495
496# ppbus related options
497PERIPH_1284		opt_ppb_1284.h
498DONTPROBE_1284		opt_ppb_1284.h
499
500# smbus related options
501ENABLE_ALART		opt_intpm.h
502
503# These cause changes all over the kernel
504BLKDEV_IOSIZE		opt_global.h
505BURN_BRIDGES		opt_global.h
506DEBUG			opt_global.h
507DEBUG_LOCKS		opt_global.h
508DEBUG_VFS_LOCKS		opt_global.h
509DIAGNOSTIC		opt_global.h
510INVARIANT_SUPPORT	opt_global.h
511INVARIANTS		opt_global.h
512MCLSHIFT		opt_global.h
513MUTEX_DEBUG		opt_global.h
514MUTEX_NOINLINE		opt_global.h
515MUTEX_PROFILING		opt_global.h
516MSIZE			opt_global.h
517REGRESSION		opt_global.h
518RESTARTABLE_PANICS	opt_global.h
519RWLOCK_NOINLINE		opt_global.h
520VFS_BIO_DEBUG		opt_global.h
521
522# These are VM related options
523VM_KMEM_SIZE		opt_vm.h
524VM_KMEM_SIZE_SCALE	opt_vm.h
525VM_KMEM_SIZE_MAX	opt_vm.h
526NO_SWAPPING		opt_vm.h
527MALLOC_MAKE_FAILURES	opt_vm.h
528MALLOC_PROFILE		opt_vm.h
529PQ_NOOPT		opt_vmpage.h
530
531# The MemGuard replacement allocator used for tamper-after-free detection
532DEBUG_MEMGUARD		opt_vm.h
533
534# The RedZone malloc(9) protection
535DEBUG_REDZONE		opt_vm.h
536
537# Standard SMP options
538SMP			opt_global.h
539
540# Size of the kernel message buffer
541MSGBUF_SIZE		opt_msgbuf.h
542
543# NFS options
544NFS_MINATTRTIMO		opt_nfs.h
545NFS_MAXATTRTIMO		opt_nfs.h
546NFS_MINDIRATTRTIMO	opt_nfs.h
547NFS_MAXDIRATTRTIMO	opt_nfs.h
548NFS_GATHERDELAY		opt_nfs.h
549NFS_WDELAYHASHSIZ	opt_nfs.h
550NFS_DEBUG		opt_nfs.h
551
552# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
553OVERRIDE_CARD			opt_bktr.h
554OVERRIDE_TUNER			opt_bktr.h
555OVERRIDE_DBX			opt_bktr.h
556OVERRIDE_MSP			opt_bktr.h
557BROOKTREE_SYSTEM_DEFAULT	opt_bktr.h
558BROOKTREE_ALLOC_PAGES		opt_bktr.h
559BKTR_OVERRIDE_CARD		opt_bktr.h
560BKTR_OVERRIDE_TUNER		opt_bktr.h
561BKTR_OVERRIDE_DBX		opt_bktr.h
562BKTR_OVERRIDE_MSP		opt_bktr.h
563BKTR_SYSTEM_DEFAULT		opt_bktr.h
564BKTR_ALLOC_PAGES		opt_bktr.h
565BKTR_USE_PLL			opt_bktr.h
566BKTR_GPIO_ACCESS		opt_bktr.h
567BKTR_NO_MSP_RESET		opt_bktr.h
568BKTR_430_FX_MODE		opt_bktr.h
569BKTR_SIS_VIA_MODE		opt_bktr.h
570BKTR_USE_FREEBSD_SMBUS		opt_bktr.h
571BKTR_NEW_MSP34XX_DRIVER		opt_bktr.h
572
573# options for serial support
574COM_ESP			opt_sio.h
575COM_MULTIPORT		opt_sio.h
576BREAK_TO_DEBUGGER	opt_comconsole.h
577ALT_BREAK_TO_DEBUGGER	opt_comconsole.h
578
579# Options to support PPS
580UART_PPS_ON_CTS		opt_uart.h
581
582# options for bus/device framework
583BUS_DEBUG		opt_bus.h
584
585# options for USB support
586USB_DEBUG		opt_usb.h
587USBVERBOSE		opt_usb.h
588UKBD_DFLT_KEYMAP	opt_ukbd.h
589UPLCOM_INTR_INTERVAL	opt_uplcom.h
590UVSCOM_DEFAULT_OPKTSIZE	opt_uvscom.h
591UVSCOM_INTR_INTERVAL	opt_uvscom.h
592
593# Embedded system options
594INIT_PATH
595
596ROOTDEVNAME
597
598FDC_DEBUG		opt_fdc.h
599PCFCLOCK_VERBOSE	opt_pcfclock.h
600PCFCLOCK_MAX_RETRIES	opt_pcfclock.h
601
602KTR			opt_global.h
603KTR_ALQ			opt_ktr.h
604KTR_MASK		opt_ktr.h
605KTR_CPUMASK		opt_ktr.h
606KTR_COMPILE		opt_global.h
607KTR_ENTRIES		opt_global.h
608KTR_VERBOSE		opt_ktr.h
609WITNESS			opt_global.h
610WITNESS_KDB		opt_witness.h
611WITNESS_SKIPSPIN	opt_witness.h
612
613# options for ACPI support
614ACPI_DEBUG		opt_acpi.h
615ACPI_MAX_THREADS	opt_acpi.h
616ACPI_NO_SEMAPHORES	opt_acpi.h
617ACPICA_PEDANTIC		opt_acpi.h
618
619# options for DEVFS, see sys/fs/devfs/devfs.h
620NDEVFSINO		opt_devfs.h
621NDEVFSOVERFLOW		opt_devfs.h
622
623# various 'device presence' options.
624DEV_BPF			opt_bpf.h
625DEV_ISA			opt_isa.h
626DEV_MCA			opt_mca.h
627DEV_CARP		opt_carp.h
628DEV_SPLASH		opt_splash.h
629
630EISA_SLOTS		opt_eisa.h
631
632# ed driver
633ED_HPP			opt_ed.h
634ED_3C503		opt_ed.h
635ED_SIC			opt_ed.h
636
637# bge driver
638BGE_FAKE_AUTONEG	opt_bge.h
639
640# wi driver
641WI_SYMBOL_FIRMWARE	opt_wi.h
642
643SOCKBUF_DEBUG		opt_global.h
644
645# options for ubsec driver
646UBSEC_DEBUG		opt_ubsec.h
647UBSEC_RNDTEST		opt_ubsec.h
648UBSEC_NO_RNG		opt_ubsec.h
649
650# options for hifn driver
651HIFN_DEBUG		opt_hifn.h
652HIFN_RNDTEST		opt_hifn.h
653
654# options for safenet driver
655SAFE_DEBUG		opt_safe.h
656SAFE_NO_RNG		opt_safe.h
657SAFE_RNDTEST		opt_safe.h
658
659# syscons options
660MAXCONS			opt_syscons.h
661SC_ALT_MOUSE_IMAGE	opt_syscons.h
662SC_CUT_SPACES2TABS	opt_syscons.h
663SC_CUT_SEPCHARS		opt_syscons.h
664SC_DEBUG_LEVEL		opt_syscons.h
665SC_DFLT_FONT		opt_syscons.h
666SC_DISABLE_KDBKEY	opt_syscons.h
667SC_DISABLE_REBOOT	opt_syscons.h
668SC_HISTORY_SIZE		opt_syscons.h
669SC_KERNEL_CONS_ATTR	opt_syscons.h
670SC_KERNEL_CONS_REV_ATTR	opt_syscons.h
671SC_MOUSE_CHAR		opt_syscons.h
672SC_NO_CUTPASTE		opt_syscons.h
673SC_NO_FONT_LOADING	opt_syscons.h
674SC_NO_HISTORY		opt_syscons.h
675SC_NO_SUSPEND_VTYSWITCH	opt_syscons.h
676SC_NO_SYSMOUSE		opt_syscons.h
677SC_NORM_ATTR		opt_syscons.h
678SC_NORM_REV_ATTR	opt_syscons.h
679SC_PIXEL_MODE		opt_syscons.h
680SC_RENDER_DEBUG		opt_syscons.h
681SC_TWOBUTTON_MOUSE	opt_syscons.h
682
683# kbd options
684KBD_DISABLE_KEYMAP_LOAD	opt_kbd.h
685KBD_INSTALL_CDEV	opt_kbd.h
686KBD_MAXRETRY		opt_kbd.h
687KBD_MAXWAIT		opt_kbd.h
688KBD_RESETDELAY		opt_kbd.h
689KBDIO_DEBUG		opt_kbd.h
690
691# options for the Atheros driver
692ATH_DEBUG		opt_ath.h
693ATH_TXBUF		opt_ath.h
694ATH_RXBUF		opt_ath.h
695ATH_DIAGAPI		opt_ath.h
696ATH_TX99_DIAG		opt_ath.h
697
698# options for the Atheros HAL (only useful with source code)
699AH_SUPPORT_AR5210	opt_ah.h
700AH_SUPPORT_AR5211	opt_ah.h
701AH_SUPPORT_AR5212	opt_ah.h
702AH_SUPPORT_5111		opt_ah.h
703AH_SUPPORT_5112		opt_ah.h
704AH_SUPPORT_2413		opt_ah.h
705AH_SUPPORT_5413		opt_ah.h
706AH_DEBUG		opt_ah.h
707AH_DEBUG_ALQ		opt_ah.h
708AH_ASSERT		opt_ah.h
709
710# dcons options
711DCONS_BUF_SIZE		opt_dcons.h
712DCONS_POLL_HZ		opt_dcons.h
713DCONS_FORCE_CONSOLE	opt_dcons.h
714DCONS_FORCE_GDB		opt_dcons.h
715
716# Static unit counts
717NI4BTRC			opt_i4b.h
718NI4BRBCH		opt_i4b.h
719NI4BTEL			opt_i4b.h
720NI4BIPR			opt_i4b.h
721NI4BING			opt_i4b.h
722NI4BISPPP		opt_i4b.h
723
724# VFS options
725LOOKUP_SHARED		opt_vfs.h
726
727# HWPMC options
728HWPMC_HOOKS
729
730# XBOX options for FreeBSD/i386, but some files are MI
731XBOX			opt_xbox.h
732
733# XFS
734XFS
735