1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affect only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AHC_ALLOW_MEMIO opt_aic7xxx.h 35AHC_TMODE_ENABLE opt_aic7xxx.h 36AHC_DUMP_EEPROM opt_aic7xxx.h 37AHC_DEBUG opt_aic7xxx.h 38AHC_DEBUG_OPTS opt_aic7xxx.h 39AHC_REG_PRETTY_PRINT opt_aic7xxx.h 40AHD_DEBUG opt_aic79xx.h 41AHD_DEBUG_OPTS opt_aic79xx.h 42AHD_TMODE_ENABLE opt_aic79xx.h 43AHD_REG_PRETTY_PRINT opt_aic79xx.h 44ADW_ALLOW_MEMIO opt_adw.h 45 46TWA_DEBUG opt_twa.h 47TWA_FLASH_FIRMWARE opt_twa.h 48 49# Debugging options. 50DDB 51DDB_NUMSYM opt_ddb.h 52GDB 53GDBSPEED opt_gdb.h 54KDB opt_global.h 55KDB_TRACE opt_kdb.h 56KDB_UNATTENDED opt_kdb.h 57SYSCTL_DEBUG opt_sysctl.h 58 59# Miscellaneous options. 60ADAPTIVE_GIANT opt_adaptive_mutexes.h 61NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 62ALQ 63CODA_COMPAT_5 opt_coda.h 64COMPAT_43 opt_compat.h 65COMPAT_FREEBSD4 opt_compat.h 66COMPAT_FREEBSD5 opt_compat.h 67COMPILING_LINT opt_global.h 68CONSPEED opt_comconsole.h 69CY_PCI_FASTINTR 70DIRECTIO opt_directio.h 71FULL_PREEMPTION opt_sched.h 72PREEMPTION opt_sched.h 73IPI_PREEMPTION opt_sched.h 74GEOM_AES opt_geom.h 75GEOM_APPLE opt_geom.h 76GEOM_BDE opt_geom.h 77GEOM_BSD opt_geom.h 78GEOM_CONCAT opt_geom.h 79GEOM_ELI opt_geom.h 80GEOM_FOX opt_geom.h 81GEOM_GATE opt_geom.h 82GEOM_GPT opt_geom.h 83GEOM_LABEL opt_geom.h 84GEOM_MBR opt_geom.h 85GEOM_MIRROR opt_geom.h 86GEOM_NOP opt_geom.h 87GEOM_PC98 opt_geom.h 88GEOM_RAID3 opt_geom.h 89GEOM_SHSEC opt_geom.h 90GEOM_STRIPE opt_geom.h 91GEOM_SUNLABEL opt_geom.h 92GEOM_UZIP opt_geom.h 93GEOM_VOL opt_geom.h 94GEOM_ZERO opt_geom.h 95KSTACK_MAX_PAGES 96KSTACK_PAGES 97KTRACE 98KTRACE_REQUEST_POOL opt_ktrace.h 99LIBICONV 100MAC 101MAC_ALWAYS_LABEL_MBUF opt_mac.h 102MAC_BIBA opt_dontuse.h 103MAC_BSDEXTENDED opt_dontuse.h 104MAC_DEBUG opt_mac.h 105MAC_IFOFF opt_dontuse.h 106MAC_LOMAC opt_dontuse.h 107MAC_MLS opt_dontuse.h 108MAC_NONE opt_dontuse.h 109MAC_PARTITION opt_dontuse.h 110MAC_PORTACL opt_dontuse.h 111MAC_SEEOTHERUIDS opt_dontuse.h 112MAC_STATIC opt_mac.h 113MAC_STUB opt_dontuse.h 114MAC_TEST opt_dontuse.h 115MD_ROOT opt_md.h 116MD_ROOT_SIZE opt_md.h 117MPROF_BUFFERS opt_mprof.h 118MPROF_HASH_SIZE opt_mprof.h 119MUTEX_WAKE_ALL 120NSWBUF_MIN opt_swap.h 121PANIC_REBOOT_WAIT_TIME opt_panic.h 122PPS_SYNC opt_ntp.h 123PUC_FASTINTR opt_puc.h 124QUOTA 125SCHED_4BSD opt_sched.h 126SCHED_ULE opt_sched.h 127SHOW_BUSYBUFS 128SLEEPQUEUE_PROFILING 129SLHCI_DEBUG opt_slhci.h 130SPX_HACK 131SUIDDIR opt_suiddir.h 132MSGMNB opt_sysvipc.h 133MSGMNI opt_sysvipc.h 134MSGSEG opt_sysvipc.h 135MSGSSZ opt_sysvipc.h 136MSGTQL opt_sysvipc.h 137SEMMAP opt_sysvipc.h 138SEMMNI opt_sysvipc.h 139SEMMNS opt_sysvipc.h 140SEMMNU opt_sysvipc.h 141SEMMSL opt_sysvipc.h 142SEMOPM opt_sysvipc.h 143SEMUME opt_sysvipc.h 144SHMALL opt_sysvipc.h 145SHMMAX opt_sysvipc.h 146SHMMAXPGS opt_sysvipc.h 147SHMMIN opt_sysvipc.h 148SHMMNI opt_sysvipc.h 149SHMSEG opt_sysvipc.h 150SYSVMSG opt_sysvipc.h 151SYSVSEM opt_sysvipc.h 152SYSVSHM opt_sysvipc.h 153SW_WATCHDOG opt_watchdog.h 154TURNSTILE_PROFILING 155TTYHOG opt_tty.h 156VFS_AIO 157WLCACHE opt_wavelan.h 158WLDEBUG opt_wavelan.h 159 160# POSIX kernel options 161P1003_1B_SEMAPHORES opt_posix.h 162_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 163 164# Do we want the config file compiled into the kernel? 165INCLUDE_CONFIG_FILE opt_config.h 166 167# Options for static filesystems. These should only be used at config 168# time, since the corresponding lkms cannot work if there are any static 169# dependencies. Unusability is enforced by hiding the defines for the 170# options in a never-included header. 171CD9660 opt_dontuse.h 172CODA opt_dontuse.h 173EXT2FS opt_dontuse.h 174FDESCFS opt_dontuse.h 175HPFS opt_dontuse.h 176LINPROCFS opt_dontuse.h 177MSDOSFS opt_dontuse.h 178NTFS opt_dontuse.h 179NULLFS opt_dontuse.h 180NWFS opt_dontuse.h 181PORTALFS opt_dontuse.h 182PROCFS opt_dontuse.h 183PSEUDOFS opt_dontuse.h 184REISERFS opt_dontuse.h 185SMBFS opt_dontuse.h 186UDF opt_dontuse.h 187UMAPFS opt_dontuse.h 188UNIONFS opt_dontuse.h 189 190# Pseudofs debugging 191PSEUDOFS_TRACE opt_pseudofs.h 192 193# Broken - ffs_snapshot() dependency from ufs_lookup() :-( 194FFS opt_ffs_broken_fixme.h 195 196# These static filesystems have one slightly bogus static dependency in 197# sys/i386/i386/autoconf.c. If any of these filesystems are 198# statically compiled into the kernel, code for mounting them as root 199# filesystems will be enabled - but look below. 200NFSCLIENT opt_nfs.h 201NFSSERVER opt_nfs.h 202 203# filesystems and libiconv bridge 204CD9660_ICONV opt_dontuse.h 205MSDOSFS_ICONV opt_dontuse.h 206NTFS_ICONV opt_dontuse.h 207UDF_ICONV opt_dontuse.h 208 209# If you are following the conditions in the copyright, 210# you can enable soft-updates which will speed up a lot of thigs 211# and make the system safer from crashes at the same time. 212# otherwise a STUB module will be compiled in. 213SOFTUPDATES opt_ffs.h 214 215# Enabling this option turns on support for Access Control Lists in UFS, 216# which can be used to support high security configurations. Depends on 217# UFS_EXTATTR. 218UFS_ACL opt_ufs.h 219 220# Enabling this option turns on support for extended attributes in UFS-based 221# filesystems, which can be used to support high security configurations 222# as well as new filesystem features. 223UFS_EXTATTR opt_ufs.h 224UFS_EXTATTR_AUTOSTART opt_ufs.h 225 226# Enable fast hash lookups for large directories on UFS-based filesystems. 227UFS_DIRHASH opt_ufs.h 228 229# The below sentence is not in English, and neither is this one. 230# We plan to remove the static dependences above, with a 231# <filesystem>_ROOT option to control if it usable as root. This list 232# allows these options to be present in config files already (though 233# they won't make any difference yet). 234NFS_ROOT opt_nfsroot.h 235 236# SMB/CIFS requester 237NETSMB opt_netsmb.h 238NETSMBCRYPTO opt_netsmb.h 239 240# Experimental support for large MS-DOS filesystems; SEE WARNING IN "NOTES"! 241MSDOSFS_LARGE opt_msdosfs.h 242 243# Options used only in subr_param.c. 244HZ opt_param.h 245MAXFILES opt_param.h 246NBUF opt_param.h 247NMBCLUSTERS opt_param.h 248NSFBUFS opt_param.h 249VM_BCACHE_SIZE_MAX opt_param.h 250VM_SWZONE_SIZE_MAX opt_param.h 251MAXUSERS 252DFLDSIZ opt_param.h 253MAXDSIZ opt_param.h 254MAXSSIZ opt_param.h 255 256# Generic SCSI options. 257CAM_MAX_HIGHPOWER opt_cam.h 258CAMDEBUG opt_cam.h 259CAM_DEBUG_DELAY opt_cam.h 260CAM_DEBUG_BUS opt_cam.h 261CAM_DEBUG_TARGET opt_cam.h 262CAM_DEBUG_LUN opt_cam.h 263CAM_DEBUG_FLAGS opt_cam.h 264CAM_NEW_TRAN_CODE opt_cam.h 265SCSI_DELAY opt_scsi.h 266SCSI_NO_SENSE_STRINGS opt_scsi.h 267SCSI_NO_OP_STRINGS opt_scsi.h 268 269# Options used only in cam/scsi/scsi_cd.c 270CHANGER_MIN_BUSY_SECONDS opt_cd.h 271CHANGER_MAX_BUSY_SECONDS opt_cd.h 272 273# Options used only in cam/scsi/scsi_sa.c. 274SA_IO_TIMEOUT opt_sa.h 275SA_SPACE_TIMEOUT opt_sa.h 276SA_REWIND_TIMEOUT opt_sa.h 277SA_ERASE_TIMEOUT opt_sa.h 278SA_1FM_AT_EOD opt_sa.h 279 280# Options used only in cam/scsi/scsi_pt.c 281SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 282 283# Options used only in cam/scsi/scsi_ses.c 284SES_ENABLE_PASSTHROUGH opt_ses.h 285 286# Options used in dev/sym/ (Symbios SCSI driver). 287SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 288 # Allows the ncr to take precedence 289 # 1 (1<<0) -> 810a, 860 290 # 2 (1<<1) -> 825a, 875, 885, 895 291 # 4 (1<<2) -> 895a, 896, 1510d 292SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 293 # disabled:0 (default), enabled:1 294SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 295 # disabled:0, enabled:1 (default) 296SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 297 # default:8, range:[1..64] 298 299# Options used only in pci/ncr.c 300SCSI_NCR_DEBUG opt_ncr.h 301SCSI_NCR_MAX_SYNC opt_ncr.h 302SCSI_NCR_MAX_WIDE opt_ncr.h 303SCSI_NCR_MYADDR opt_ncr.h 304 305# Options used only in dev/isp/* 306ISP_TARGET_MODE opt_isp.h 307ISP_FW_CRASH_DUMP opt_isp.h 308 309# Options used in the 'ata' ATA/ATAPI driver 310ATA_STATIC_ID opt_ata.h 311ATA_NOPCI opt_ata.h 312 313# Net stuff. 314ACCEPT_FILTER_DATA 315ACCEPT_FILTER_HTTP 316ALTQ opt_global.h 317ALTQ_CBQ opt_altq.h 318ALTQ_RED opt_altq.h 319ALTQ_RIO opt_altq.h 320ALTQ_HFSC opt_altq.h 321ALTQ_CDNR opt_altq.h 322ALTQ_PRIQ opt_altq.h 323ALTQ_NOPCC opt_altq.h 324ALTQ_DEBUG opt_altq.h 325BOOTP opt_bootp.h 326BOOTP_COMPAT opt_bootp.h 327BOOTP_NFSROOT opt_bootp.h 328BOOTP_NFSV3 opt_bootp.h 329BOOTP_WIRED_TO opt_bootp.h 330BRIDGE opt_bdg.h 331DEV_PF opt_pf.h 332DEV_PFLOG opt_pf.h 333DEV_PFSYNC opt_pf.h 334ETHER_II opt_ef.h 335ETHER_8023 opt_ef.h 336ETHER_8022 opt_ef.h 337ETHER_SNAP opt_ef.h 338MROUTING opt_mrouting.h 339PIM opt_mrouting.h 340INET opt_inet.h 341INET6 opt_inet6.h 342IPSEC opt_ipsec.h 343IPSEC_ESP opt_ipsec.h 344IPSEC_DEBUG opt_ipsec.h 345IPSEC_FILTERGIF opt_ipsec.h 346FAST_IPSEC opt_ipsec.h 347IPDIVERT 348DUMMYNET opt_ipdn.h 349IPFILTER opt_ipfilter.h 350IPFILTER_LOG opt_ipfilter.h 351IPFILTER_LOOKUP opt_ipfilter.h 352IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 353IPFIREWALL opt_ipfw.h 354IPFIREWALL_VERBOSE opt_ipfw.h 355IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 356IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 357IPFIREWALL_FORWARD opt_ipfw.h 358IPFIREWALL_FORWARD_EXTENDED opt_ipfw.h 359IPV6FIREWALL opt_ip6fw.h 360IPV6FIREWALL_VERBOSE opt_ip6fw.h 361IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 362IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 363IPSTEALTH 364IPX 365IPXIP opt_ipx.h 366LIBMBPOOL 367LIBMCHAIN 368LIBALIAS 369MBUF_STRESS_TEST opt_mbuf_stress_test.h 370NCP 371NETATALK opt_atalk.h 372NET_WITH_GIANT opt_net.h 373PPP_BSDCOMP opt_ppp.h 374PPP_DEFLATE opt_ppp.h 375PPP_FILTER opt_ppp.h 376SLIP_IFF_OPTS opt_slip.h 377TCPDEBUG 378TCP_SIGNATURE opt_inet.h 379TCP_SACK_DEBUG opt_tcp_sack.h 380TCP_DROP_SYNFIN opt_tcp_input.h 381XBONEHACK 382 383# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 384# Each netgraph node type can be either be compiled into the kernel 385# or loaded dynamically. To get the former, include the corresponding 386# option below. Each type has its own man page, e.g. ng_async(4). 387NETGRAPH 388NETGRAPH_DEBUG opt_netgraph.h 389NETGRAPH_ASYNC opt_netgraph.h 390NETGRAPH_ATMLLC opt_netgraph.h 391NETGRAPH_ATM_ATMPIF opt_netgraph.h 392NETGRAPH_BLUETOOTH opt_netgraph.h 393NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 394NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 395NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 396NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 397NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 398NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 399NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 400NETGRAPH_BPF opt_netgraph.h 401NETGRAPH_BRIDGE opt_netgraph.h 402NETGRAPH_CISCO opt_netgraph.h 403NETGRAPH_DEVICE opt_netgraph.h 404NETGRAPH_ECHO opt_netgraph.h 405NETGRAPH_EIFACE opt_netgraph.h 406NETGRAPH_ETHER opt_netgraph.h 407NETGRAPH_FEC opt_netgraph.h 408NETGRAPH_FRAME_RELAY opt_netgraph.h 409NETGRAPH_GIF opt_netgraph.h 410NETGRAPH_GIF_DEMUX opt_netgraph.h 411NETGRAPH_HOLE opt_netgraph.h 412NETGRAPH_IFACE opt_netgraph.h 413NETGRAPH_IP_INPUT opt_netgraph.h 414NETGRAPH_IPFW opt_netgraph.h 415NETGRAPH_KSOCKET opt_netgraph.h 416NETGRAPH_L2TP opt_netgraph.h 417NETGRAPH_LMI opt_netgraph.h 418# MPPC compression requires proprietary files (not included) 419NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 420NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 421NETGRAPH_NAT opt_netgraph.h 422NETGRAPH_NETFLOW opt_netgraph.h 423NETGRAPH_ONE2MANY opt_netgraph.h 424NETGRAPH_PPP opt_netgraph.h 425NETGRAPH_PPPOE opt_netgraph.h 426NETGRAPH_PPTPGRE opt_netgraph.h 427NETGRAPH_RFC1490 opt_netgraph.h 428NETGRAPH_SOCKET opt_netgraph.h 429NETGRAPH_SPLIT opt_netgraph.h 430NETGRAPH_SPPP opt_netgraph.h 431NETGRAPH_TCPMSS opt_netgraph.h 432NETGRAPH_TEE opt_netgraph.h 433NETGRAPH_TTY opt_netgraph.h 434NETGRAPH_UI opt_netgraph.h 435NETGRAPH_VJC opt_netgraph.h 436 437# NgATM options 438NGATM_ATM opt_netgraph.h 439NGATM_ATMBASE opt_netgraph.h 440NGATM_SSCOP opt_netgraph.h 441NGATM_SSCFU opt_netgraph.h 442NGATM_UNI opt_netgraph.h 443NGATM_CCATM opt_netgraph.h 444 445# DRM options 446DRM_DEBUG opt_drm.h 447 448ZERO_COPY_SOCKETS opt_zero.h 449TI_PRIVATE_JUMBOS opt_ti.h 450TI_JUMBO_HDRSPLIT opt_ti.h 451 452# ATM (HARP version) 453ATM_CORE opt_atm.h 454ATM_IP opt_atm.h 455ATM_SIGPVC opt_atm.h 456ATM_SPANS opt_atm.h 457ATM_UNI opt_atm.h 458 459# XXX Conflict: # of devices vs network protocol (Native ATM). 460# This makes "atm.h" unusable. 461NATM 462 463# DPT driver debug flags 464DPT_MEASURE_PERFORMANCE opt_dpt.h 465DPT_HANDLE_TIMEOUTS opt_dpt.h 466DPT_TIMEOUT_FACTOR opt_dpt.h 467DPT_LOST_IRQ opt_dpt.h 468DPT_RESET_HBA opt_dpt.h 469 470# Misc debug flags. Most of these should probably be replaced with 471# 'DEBUG', and then let people recompile just the interesting modules 472# with 'make CC="cc -DDEBUG"'. 473CLUSTERDEBUG opt_debug_cluster.h 474DEBUG_1284 opt_ppb_1284.h 475VP0_DEBUG opt_vpo.h 476LPT_DEBUG opt_lpt.h 477PLIP_DEBUG opt_plip.h 478LOCKF_DEBUG opt_debug_lockf.h 479NETATALKDEBUG opt_atalk.h 480SI_DEBUG opt_debug_si.h 481SX_DEBUG opt_debug_sx.h 482 483# Fb options 484FB_DEBUG opt_fb.h 485FB_INSTALL_CDEV opt_fb.h 486 487# ppbus related options 488PERIPH_1284 opt_ppb_1284.h 489DONTPROBE_1284 opt_ppb_1284.h 490 491# smbus related options 492ENABLE_ALART opt_intpm.h 493 494# These cause changes all over the kernel 495BLKDEV_IOSIZE opt_global.h 496BURN_BRIDGES opt_global.h 497DEBUG opt_global.h 498DEBUG_LOCKS opt_global.h 499DEBUG_VFS_LOCKS opt_global.h 500DIAGNOSTIC opt_global.h 501INVARIANT_SUPPORT opt_global.h 502INVARIANTS opt_global.h 503MCLSHIFT opt_global.h 504MUTEX_DEBUG opt_global.h 505MUTEX_NOINLINE opt_global.h 506MUTEX_PROFILING opt_global.h 507MSIZE opt_global.h 508REGRESSION opt_global.h 509RESTARTABLE_PANICS opt_global.h 510VFS_BIO_DEBUG opt_global.h 511 512# These are VM related options 513VM_KMEM_SIZE opt_vm.h 514VM_KMEM_SIZE_SCALE opt_vm.h 515VM_KMEM_SIZE_MAX opt_vm.h 516NO_SWAPPING opt_vm.h 517MALLOC_MAKE_FAILURES opt_vm.h 518MALLOC_PROFILE opt_vm.h 519PQ_NOOPT opt_vmpage.h 520PQ_NORMALCACHE opt_vmpage.h 521PQ_MEDIUMCACHE opt_vmpage.h 522PQ_LARGECACHE opt_vmpage.h 523PQ_HUGECACHE opt_vmpage.h 524PQ_CACHESIZE opt_vmpage.h 525 526# The MemGuard replacement allocator used for tamper-after-free detection 527DEBUG_MEMGUARD opt_vm.h 528 529# Standard SMP options 530SMP opt_global.h 531 532# Size of the kernel message buffer 533MSGBUF_SIZE opt_msgbuf.h 534 535# NFS options 536NFS_MINATTRTIMO opt_nfs.h 537NFS_MAXATTRTIMO opt_nfs.h 538NFS_MINDIRATTRTIMO opt_nfs.h 539NFS_MAXDIRATTRTIMO opt_nfs.h 540NFS_GATHERDELAY opt_nfs.h 541NFS_WDELAYHASHSIZ opt_nfs.h 542NFS_DEBUG opt_nfs.h 543 544# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 545OVERRIDE_CARD opt_bktr.h 546OVERRIDE_TUNER opt_bktr.h 547OVERRIDE_DBX opt_bktr.h 548OVERRIDE_MSP opt_bktr.h 549BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 550BROOKTREE_ALLOC_PAGES opt_bktr.h 551BKTR_OVERRIDE_CARD opt_bktr.h 552BKTR_OVERRIDE_TUNER opt_bktr.h 553BKTR_OVERRIDE_DBX opt_bktr.h 554BKTR_OVERRIDE_MSP opt_bktr.h 555BKTR_SYSTEM_DEFAULT opt_bktr.h 556BKTR_ALLOC_PAGES opt_bktr.h 557BKTR_USE_PLL opt_bktr.h 558BKTR_GPIO_ACCESS opt_bktr.h 559BKTR_NO_MSP_RESET opt_bktr.h 560BKTR_430_FX_MODE opt_bktr.h 561BKTR_SIS_VIA_MODE opt_bktr.h 562BKTR_USE_FREEBSD_SMBUS opt_bktr.h 563BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 564 565# options for serial support 566COM_ESP opt_sio.h 567COM_MULTIPORT opt_sio.h 568BREAK_TO_DEBUGGER opt_comconsole.h 569ALT_BREAK_TO_DEBUGGER opt_comconsole.h 570 571# Options to support PPS 572UART_PPS_ON_CTS opt_uart.h 573 574# options for bus/device framework 575BUS_DEBUG opt_bus.h 576 577# options for USB support 578USB_DEBUG opt_usb.h 579USBVERBOSE opt_usb.h 580UKBD_DFLT_KEYMAP opt_ukbd.h 581UPLCOM_INTR_INTERVAL opt_uplcom.h 582UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 583UVSCOM_INTR_INTERVAL opt_uvscom.h 584 585# Embedded system options 586INIT_PATH opt_init_path.h 587 588ROOTDEVNAME opt_rootdevname.h 589 590FDC_DEBUG opt_fdc.h 591PCFCLOCK_VERBOSE opt_pcfclock.h 592PCFCLOCK_MAX_RETRIES opt_pcfclock.h 593TDFX_LINUX opt_tdfx.h 594 595KTR opt_global.h 596KTR_ALQ opt_ktr.h 597KTR_MASK opt_ktr.h 598KTR_CPUMASK opt_ktr.h 599KTR_COMPILE opt_global.h 600KTR_ENTRIES opt_global.h 601KTR_VERBOSE opt_ktr.h 602WITNESS opt_global.h 603WITNESS_KDB opt_witness.h 604WITNESS_SKIPSPIN opt_witness.h 605 606# options for ACPI support 607ACPI_DEBUG opt_acpi.h 608ACPI_MAX_THREADS opt_acpi.h 609ACPI_NO_SEMAPHORES opt_acpi.h 610ACPICA_PEDANTIC opt_acpi.h 611 612# options for DEVFS, see sys/fs/devfs/devfs.h 613NDEVFSINO opt_devfs.h 614NDEVFSOVERFLOW opt_devfs.h 615 616# various 'device presence' options. 617DEV_BPF opt_bpf.h 618DEV_ISA opt_isa.h 619DEV_MCA opt_mca.h 620DEV_CARP opt_carp.h 621DEV_SPLASH opt_splash.h 622 623EISA_SLOTS opt_eisa.h 624 625# ed driver 626ED_HPP opt_ed.h 627ED_3C503 opt_ed.h 628ED_SIC opt_ed.h 629 630# bge driver 631BGE_FAKE_AUTONEG opt_bge.h 632 633# wi driver 634WI_SYMBOL_FIRMWARE opt_wi.h 635 636# XXX bogusly global. 637DEVICE_POLLING opt_global.h 638 639SOCKBUF_DEBUG opt_global.h 640 641# options for ubsec driver 642UBSEC_DEBUG opt_ubsec.h 643UBSEC_RNDTEST opt_ubsec.h 644UBSEC_NO_RNG opt_ubsec.h 645 646# options for hifn driver 647HIFN_DEBUG opt_hifn.h 648HIFN_RNDTEST opt_hifn.h 649 650# options for safenet driver 651SAFE_DEBUG opt_safe.h 652SAFE_NO_RNG opt_safe.h 653SAFE_RNDTEST opt_safe.h 654 655# syscons options 656MAXCONS opt_syscons.h 657SC_ALT_MOUSE_IMAGE opt_syscons.h 658SC_CUT_SPACES2TABS opt_syscons.h 659SC_CUT_SEPCHARS opt_syscons.h 660SC_DEBUG_LEVEL opt_syscons.h 661SC_DFLT_FONT opt_syscons.h 662SC_DISABLE_KDBKEY opt_syscons.h 663SC_DISABLE_REBOOT opt_syscons.h 664SC_HISTORY_SIZE opt_syscons.h 665SC_KERNEL_CONS_ATTR opt_syscons.h 666SC_KERNEL_CONS_REV_ATTR opt_syscons.h 667SC_MOUSE_CHAR opt_syscons.h 668SC_NO_CUTPASTE opt_syscons.h 669SC_NO_FONT_LOADING opt_syscons.h 670SC_NO_HISTORY opt_syscons.h 671SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 672SC_NO_SYSMOUSE opt_syscons.h 673SC_NORM_ATTR opt_syscons.h 674SC_NORM_REV_ATTR opt_syscons.h 675SC_PIXEL_MODE opt_syscons.h 676SC_RENDER_DEBUG opt_syscons.h 677SC_TWOBUTTON_MOUSE opt_syscons.h 678 679# kbd options 680KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 681KBD_INSTALL_CDEV opt_kbd.h 682KBD_MAXRETRY opt_kbd.h 683KBD_MAXWAIT opt_kbd.h 684KBD_RESETDELAY opt_kbd.h 685KBDIO_DEBUG opt_kbd.h 686 687# options for the Atheros HAL (only useful with source code) 688AH_SUPPORT_AR5210 opt_ah.h 689AH_SUPPORT_AR5211 opt_ah.h 690AH_SUPPORT_AR5212 opt_ah.h 691AH_SUPPORT_5111 opt_ah.h 692AH_SUPPORT_5112 opt_ah.h 693AH_SUPPORT_2413 opt_ah.h 694AH_DEBUG opt_ah.h 695AH_DEBUG_ALQ opt_ah.h 696AH_ASSERT opt_ah.h 697 698# dcons options 699DCONS_BUF_SIZE opt_dcons.h 700DCONS_POLL_HZ opt_dcons.h 701DCONS_FORCE_CONSOLE opt_dcons.h 702DCONS_FORCE_GDB opt_dcons.h 703 704# Static unit counts 705NI4BTRC opt_i4b.h 706NI4BRBCH opt_i4b.h 707NI4BTEL opt_i4b.h 708NI4BIPR opt_i4b.h 709NI4BING opt_i4b.h 710NI4BISPPP opt_i4b.h 711 712# VFS options 713LOOKUP_SHARED opt_vfs.h 714 715# HWPMC options 716HWPMC_HOOKS 717