xref: /freebsd/sys/conf/options (revision 3311ff84eac3b7e82f28e331df0586036c6d361c)
1# $FreeBSD$
2#
3#        On the handling of kernel options
4#
5# All kernel options should be listed in NOTES, with suitable
6# descriptions.  Negative options (options that make some code not
7# compile) should be commented out; LINT (generated from NOTES) should
8# compile as much code as possible.  Try to structure option-using
9# code so that a single option only switch code on, or only switch
10# code off, to make it possible to have a full compile-test.  If
11# necessary, you can check for COMPILING_LINT to get maximum code
12# coverage.
13#
14# All new options shall also be listed in either "conf/options" or
15# "conf/options.<machine>".  Options that affect a single source-file
16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17# that affect multiple files should either go in "opt_global.h" if
18# this is a kernel-wide option (used just about everywhere), or in
19# "opt_<option-name-in-lower-case>.h" if it affects only some files.
20# Note that the effect of listing only an option without a
21# header-file-name in conf/options (and cousins) is that the last
22# convention is followed.
23#
24# This handling scheme is not yet fully implemented.
25#
26#
27# Format of this file:
28# Option name	filename
29#
30# If filename is missing, the default is
31# opt_<name-of-option-in-lower-case>.h
32
33AAC_DEBUG		opt_aac.h
34AACRAID_DEBUG		opt_aacraid.h
35AHC_ALLOW_MEMIO		opt_aic7xxx.h
36AHC_TMODE_ENABLE	opt_aic7xxx.h
37AHC_DUMP_EEPROM		opt_aic7xxx.h
38AHC_DEBUG		opt_aic7xxx.h
39AHC_DEBUG_OPTS		opt_aic7xxx.h
40AHC_REG_PRETTY_PRINT	opt_aic7xxx.h
41AHD_DEBUG		opt_aic79xx.h
42AHD_DEBUG_OPTS		opt_aic79xx.h
43AHD_TMODE_ENABLE	opt_aic79xx.h
44AHD_REG_PRETTY_PRINT	opt_aic79xx.h
45ADW_ALLOW_MEMIO		opt_adw.h
46
47TWA_DEBUG		opt_twa.h
48TWA_FLASH_FIRMWARE	opt_twa.h
49
50# Debugging options.
51ALT_BREAK_TO_DEBUGGER	opt_kdb.h
52BREAK_TO_DEBUGGER	opt_kdb.h
53DDB
54DDB_BUFR_SIZE	opt_ddb.h
55DDB_CAPTURE_DEFAULTBUFSIZE	opt_ddb.h
56DDB_CAPTURE_MAXBUFSIZE	opt_ddb.h
57DDB_CTF		opt_ddb.h
58DDB_NUMSYM	opt_ddb.h
59GDB
60KDB		opt_global.h
61KDB_TRACE	opt_kdb.h
62KDB_UNATTENDED	opt_kdb.h
63KLD_DEBUG	opt_kld.h
64SYSCTL_DEBUG	opt_sysctl.h
65EARLY_PRINTF	opt_global.h
66TEXTDUMP_PREFERRED	opt_ddb.h
67TEXTDUMP_VERBOSE	opt_ddb.h
68
69# Miscellaneous options.
70ADAPTIVE_LOCKMGRS
71ALQ
72ALTERA_SDCARD_FAST_SIM	opt_altera_sdcard.h
73ATSE_CFI_HACK	opt_cfi.h
74AUDIT		opt_global.h
75BOOTHOWTO	opt_global.h
76BOOTVERBOSE	opt_global.h
77CALLOUT_PROFILING
78CAPABILITIES	opt_capsicum.h
79CAPABILITY_MODE	opt_capsicum.h
80COMPAT_43	opt_compat.h
81COMPAT_43TTY	opt_compat.h
82COMPAT_FREEBSD4	opt_compat.h
83COMPAT_FREEBSD5	opt_compat.h
84COMPAT_FREEBSD6	opt_compat.h
85COMPAT_FREEBSD7	opt_compat.h
86COMPAT_FREEBSD9	opt_compat.h
87COMPAT_FREEBSD10	opt_compat.h
88COMPAT_CLOUDABI64	opt_dontuse.h
89COMPAT_LINUXKPI	opt_compat.h
90COMPILING_LINT	opt_global.h
91CY_PCI_FASTINTR
92DEADLKRES	opt_watchdog.h
93DIRECTIO
94FILEMON		opt_dontuse.h
95FFCLOCK
96FULL_PREEMPTION	opt_sched.h
97GZIO		opt_gzio.h
98IMAGACT_BINMISC		opt_dontuse.h
99IPI_PREEMPTION	opt_sched.h
100GEOM_AES	opt_geom.h
101GEOM_BDE	opt_geom.h
102GEOM_BSD	opt_geom.h
103GEOM_CACHE	opt_geom.h
104GEOM_CONCAT	opt_geom.h
105GEOM_ELI	opt_geom.h
106GEOM_FOX	opt_geom.h
107GEOM_GATE	opt_geom.h
108GEOM_JOURNAL	opt_geom.h
109GEOM_LABEL	opt_geom.h
110GEOM_LABEL_GPT	opt_geom.h
111GEOM_LINUX_LVM	opt_geom.h
112GEOM_MAP	opt_geom.h
113GEOM_MBR	opt_geom.h
114GEOM_MIRROR	opt_geom.h
115GEOM_MOUNTVER	opt_geom.h
116GEOM_MULTIPATH	opt_geom.h
117GEOM_NOP	opt_geom.h
118GEOM_PART_APM	opt_geom.h
119GEOM_PART_BSD	opt_geom.h
120GEOM_PART_BSD64	opt_geom.h
121GEOM_PART_EBR	opt_geom.h
122GEOM_PART_EBR_COMPAT	opt_geom.h
123GEOM_PART_GPT	opt_geom.h
124GEOM_PART_LDM	opt_geom.h
125GEOM_PART_MBR	opt_geom.h
126GEOM_PART_PC98	opt_geom.h
127GEOM_PART_VTOC8	opt_geom.h
128GEOM_PC98	opt_geom.h
129GEOM_RAID	opt_geom.h
130GEOM_RAID3	opt_geom.h
131GEOM_SHSEC	opt_geom.h
132GEOM_STRIPE	opt_geom.h
133GEOM_SUNLABEL	opt_geom.h
134GEOM_UNCOMPRESS	opt_geom.h
135GEOM_UNCOMPRESS_DEBUG	opt_geom.h
136GEOM_UZIP	opt_geom.h
137GEOM_VINUM	opt_geom.h
138GEOM_VIRSTOR	opt_geom.h
139GEOM_VOL	opt_geom.h
140GEOM_ZERO	opt_geom.h
141KDTRACE_HOOKS	opt_global.h
142KDTRACE_FRAME	opt_kdtrace.h
143KN_HASHSIZE	opt_kqueue.h
144KSTACK_MAX_PAGES
145KSTACK_PAGES
146KSTACK_USAGE_PROF
147KTRACE
148KTRACE_REQUEST_POOL	opt_ktrace.h
149LIBICONV
150MAC		opt_global.h
151MAC_BIBA	opt_dontuse.h
152MAC_BSDEXTENDED	opt_dontuse.h
153MAC_IFOFF	opt_dontuse.h
154MAC_LOMAC	opt_dontuse.h
155MAC_MLS		opt_dontuse.h
156MAC_NONE	opt_dontuse.h
157MAC_PARTITION	opt_dontuse.h
158MAC_PORTACL	opt_dontuse.h
159MAC_SEEOTHERUIDS	opt_dontuse.h
160MAC_STATIC	opt_mac.h
161MAC_STUB	opt_dontuse.h
162MAC_TEST	opt_dontuse.h
163MD_ROOT		opt_md.h
164MD_ROOT_FSTYPE	opt_md.h
165MD_ROOT_SIZE	opt_md.h
166MFI_DEBUG	opt_mfi.h
167MFI_DECODE_LOG	opt_mfi.h
168MPROF_BUFFERS	opt_mprof.h
169MPROF_HASH_SIZE	opt_mprof.h
170NEW_PCIB	opt_global.h
171NO_ADAPTIVE_MUTEXES	opt_adaptive_mutexes.h
172NO_ADAPTIVE_RWLOCKS
173NO_ADAPTIVE_SX
174NO_EVENTTIMERS		opt_timer.h
175NO_SYSCTL_DESCR	opt_global.h
176NSWBUF_MIN	opt_swap.h
177MBUF_PACKET_ZONE_DISABLE	opt_global.h
178PANIC_REBOOT_WAIT_TIME	opt_panic.h
179PCI_IOV		opt_global.h
180PPC_DEBUG	opt_ppc.h
181PPC_PROBE_CHIPSET	opt_ppc.h
182PPS_SYNC	opt_ntp.h
183PREEMPTION	opt_sched.h
184QUOTA
185SCHED_4BSD	opt_sched.h
186SCHED_STATS	opt_sched.h
187SCHED_ULE	opt_sched.h
188SLEEPQUEUE_PROFILING
189SLHCI_DEBUG	opt_slhci.h
190SPX_HACK
191STACK		opt_stack.h
192SUIDDIR
193MSGMNB		opt_sysvipc.h
194MSGMNI		opt_sysvipc.h
195MSGSEG		opt_sysvipc.h
196MSGSSZ		opt_sysvipc.h
197MSGTQL		opt_sysvipc.h
198SEMMNI		opt_sysvipc.h
199SEMMNS		opt_sysvipc.h
200SEMMNU		opt_sysvipc.h
201SEMMSL		opt_sysvipc.h
202SEMOPM		opt_sysvipc.h
203SEMUME		opt_sysvipc.h
204SHMALL		opt_sysvipc.h
205SHMMAX		opt_sysvipc.h
206SHMMAXPGS	opt_sysvipc.h
207SHMMIN		opt_sysvipc.h
208SHMMNI		opt_sysvipc.h
209SHMSEG		opt_sysvipc.h
210SYSVMSG		opt_sysvipc.h
211SYSVSEM		opt_sysvipc.h
212SYSVSHM		opt_sysvipc.h
213SW_WATCHDOG	opt_watchdog.h
214TURNSTILE_PROFILING
215UMTX_PROFILING
216VFS_AIO
217VERBOSE_SYSINIT
218WLCACHE		opt_wavelan.h
219WLDEBUG		opt_wavelan.h
220
221# POSIX kernel options
222P1003_1B_MQUEUE			opt_posix.h
223P1003_1B_SEMAPHORES		opt_posix.h
224_KPOSIX_PRIORITY_SCHEDULING	opt_posix.h
225
226# Do we want the config file compiled into the kernel?
227INCLUDE_CONFIG_FILE	opt_config.h
228
229# Options for static filesystems.  These should only be used at config
230# time, since the corresponding lkms cannot work if there are any static
231# dependencies.  Unusability is enforced by hiding the defines for the
232# options in a never-included header.
233AUTOFS		opt_dontuse.h
234CD9660		opt_dontuse.h
235EXT2FS		opt_dontuse.h
236FDESCFS		opt_dontuse.h
237FFS		opt_dontuse.h
238FUSE		opt_dontuse.h
239MSDOSFS		opt_dontuse.h
240NANDFS		opt_dontuse.h
241NULLFS		opt_dontuse.h
242PROCFS		opt_dontuse.h
243PSEUDOFS	opt_dontuse.h
244REISERFS	opt_dontuse.h
245SMBFS		opt_dontuse.h
246TMPFS		opt_dontuse.h
247UDF		opt_dontuse.h
248UNIONFS		opt_dontuse.h
249ZFS		opt_dontuse.h
250
251# Pseudofs debugging
252PSEUDOFS_TRACE	opt_pseudofs.h
253
254# In-kernel GSS-API
255KGSSAPI		opt_kgssapi.h
256KGSSAPI_DEBUG	opt_kgssapi.h
257
258# These static filesystems have one slightly bogus static dependency in
259# sys/i386/i386/autoconf.c.  If any of these filesystems are
260# statically compiled into the kernel, code for mounting them as root
261# filesystems will be enabled - but look below.
262# NFSCL - client
263# NFSD - server
264NFSCL		opt_nfs.h
265NFSD		opt_nfs.h
266
267# filesystems and libiconv bridge
268CD9660_ICONV	opt_dontuse.h
269MSDOSFS_ICONV	opt_dontuse.h
270UDF_ICONV	opt_dontuse.h
271
272# If you are following the conditions in the copyright,
273# you can enable soft-updates which will speed up a lot of thigs
274# and make the system safer from crashes at the same time.
275# otherwise a STUB module will be compiled in.
276SOFTUPDATES	opt_ffs.h
277
278# On small, embedded systems, it can be useful to turn off support for
279# snapshots.  It saves about 30-40k for a feature that would be lightly
280# used, if it is used at all.
281NO_FFS_SNAPSHOT	opt_ffs.h
282
283# Enabling this option turns on support for Access Control Lists in UFS,
284# which can be used to support high security configurations.  Depends on
285# UFS_EXTATTR.
286UFS_ACL		opt_ufs.h
287
288# Enabling this option turns on support for extended attributes in UFS-based
289# filesystems, which can be used to support high security configurations
290# as well as new filesystem features.
291UFS_EXTATTR	opt_ufs.h
292UFS_EXTATTR_AUTOSTART	opt_ufs.h
293
294# Enable fast hash lookups for large directories on UFS-based filesystems.
295UFS_DIRHASH	opt_ufs.h
296
297# Enable gjournal-based UFS journal.
298UFS_GJOURNAL	opt_ufs.h
299
300# The below sentence is not in English, and neither is this one.
301# We plan to remove the static dependences above, with a
302# <filesystem>_ROOT option to control if it usable as root.  This list
303# allows these options to be present in config files already (though
304# they won't make any difference yet).
305NFS_ROOT	opt_nfsroot.h
306
307# SMB/CIFS requester
308NETSMB		opt_netsmb.h
309
310# Options used only in subr_param.c.
311HZ		opt_param.h
312MAXFILES	opt_param.h
313NBUF		opt_param.h
314NSFBUFS		opt_param.h
315VM_BCACHE_SIZE_MAX	opt_param.h
316VM_SWZONE_SIZE_MAX	opt_param.h
317MAXUSERS
318DFLDSIZ		opt_param.h
319MAXDSIZ		opt_param.h
320MAXSSIZ		opt_param.h
321
322# Generic SCSI options.
323CAM_MAX_HIGHPOWER	opt_cam.h
324CAMDEBUG		opt_cam.h
325CAM_DEBUG_COMPILE	opt_cam.h
326CAM_DEBUG_DELAY		opt_cam.h
327CAM_DEBUG_BUS		opt_cam.h
328CAM_DEBUG_TARGET	opt_cam.h
329CAM_DEBUG_LUN		opt_cam.h
330CAM_DEBUG_FLAGS		opt_cam.h
331CAM_BOOT_DELAY		opt_cam.h
332SCSI_DELAY		opt_scsi.h
333SCSI_NO_SENSE_STRINGS	opt_scsi.h
334SCSI_NO_OP_STRINGS	opt_scsi.h
335
336# Options used only in cam/ata/ata_da.c
337ADA_TEST_FAILURE	opt_ada.h
338ATA_STATIC_ID		opt_ada.h
339
340# Options used only in cam/scsi/scsi_cd.c
341CHANGER_MIN_BUSY_SECONDS	opt_cd.h
342CHANGER_MAX_BUSY_SECONDS	opt_cd.h
343
344# Options used only in cam/scsi/scsi_sa.c.
345SA_IO_TIMEOUT		opt_sa.h
346SA_SPACE_TIMEOUT	opt_sa.h
347SA_REWIND_TIMEOUT	opt_sa.h
348SA_ERASE_TIMEOUT	opt_sa.h
349SA_1FM_AT_EOD		opt_sa.h
350
351# Options used only in cam/scsi/scsi_pt.c
352SCSI_PT_DEFAULT_TIMEOUT	opt_pt.h
353
354# Options used only in cam/scsi/scsi_ses.c
355SES_ENABLE_PASSTHROUGH	opt_ses.h
356
357# Options used in dev/sym/ (Symbios SCSI driver).
358SYM_SETUP_LP_PROBE_MAP	opt_sym.h	#-Low Priority Probe Map (bits)
359					# Allows the ncr to take precedence
360					# 1 (1<<0) -> 810a, 860
361					# 2 (1<<1) -> 825a, 875, 885, 895
362					# 4 (1<<2) -> 895a, 896, 1510d
363SYM_SETUP_SCSI_DIFF	opt_sym.h	#-HVD support for 825a, 875, 885
364					# disabled:0 (default), enabled:1
365SYM_SETUP_PCI_PARITY	opt_sym.h	#-PCI parity checking
366					# disabled:0, enabled:1 (default)
367SYM_SETUP_MAX_LUN	opt_sym.h	#-Number of LUNs supported
368					# default:8, range:[1..64]
369
370# Options used only in dev/ncr/*
371SCSI_NCR_DEBUG		opt_ncr.h
372SCSI_NCR_MAX_SYNC	opt_ncr.h
373SCSI_NCR_MAX_WIDE	opt_ncr.h
374SCSI_NCR_MYADDR		opt_ncr.h
375
376# Options used only in dev/isp/*
377ISP_TARGET_MODE		opt_isp.h
378ISP_FW_CRASH_DUMP	opt_isp.h
379ISP_DEFAULT_ROLES	opt_isp.h
380ISP_INTERNAL_TARGET	opt_isp.h
381
382# Options used only in dev/iscsi
383ISCSI_INITIATOR_DEBUG	opt_iscsi_initiator.h
384
385# Net stuff.
386ACCEPT_FILTER_DATA
387ACCEPT_FILTER_DNS
388ACCEPT_FILTER_HTTP
389ALTQ			opt_global.h
390ALTQ_CBQ		opt_altq.h
391ALTQ_CDNR		opt_altq.h
392ALTQ_CODEL		opt_altq.h
393ALTQ_DEBUG		opt_altq.h
394ALTQ_HFSC		opt_altq.h
395ALTQ_FAIRQ		opt_altq.h
396ALTQ_NOPCC		opt_altq.h
397ALTQ_PRIQ		opt_altq.h
398ALTQ_RED		opt_altq.h
399ALTQ_RIO		opt_altq.h
400BOOTP			opt_bootp.h
401BOOTP_BLOCKSIZE		opt_bootp.h
402BOOTP_COMPAT		opt_bootp.h
403BOOTP_NFSROOT		opt_bootp.h
404BOOTP_NFSV3		opt_bootp.h
405BOOTP_WIRED_TO		opt_bootp.h
406DEVICE_POLLING
407DUMMYNET		opt_ipdn.h
408INET			opt_inet.h
409INET6			opt_inet6.h
410IPDIVERT
411IPFILTER		opt_ipfilter.h
412IPFILTER_DEFAULT_BLOCK	opt_ipfilter.h
413IPFILTER_LOG		opt_ipfilter.h
414IPFILTER_LOOKUP		opt_ipfilter.h
415IPFIREWALL		opt_ipfw.h
416IPFIREWALL_DEFAULT_TO_ACCEPT	opt_ipfw.h
417IPFIREWALL_NAT		opt_ipfw.h
418IPFIREWALL_VERBOSE	opt_ipfw.h
419IPFIREWALL_VERBOSE_LIMIT	opt_ipfw.h
420IPSEC			opt_ipsec.h
421IPSEC_DEBUG		opt_ipsec.h
422IPSEC_FILTERTUNNEL	opt_ipsec.h
423IPSEC_NAT_T		opt_ipsec.h
424IPSTEALTH
425KRPC
426LIBALIAS
427LIBMBPOOL
428LIBMCHAIN
429MBUF_PROFILING
430MBUF_STRESS_TEST
431MROUTING		opt_mrouting.h
432NFSLOCKD
433PCBGROUP		opt_pcbgroup.h
434PF_DEFAULT_TO_DROP	opt_pf.h
435RADIX_MPATH		opt_mpath.h
436ROUTETABLES		opt_route.h
437RSS			opt_rss.h
438SLIP_IFF_OPTS		opt_slip.h
439TCPDEBUG
440TCPPCAP		opt_global.h
441SIFTR
442TCP_OFFLOAD		opt_inet.h # Enable code to dispatch TCP offloading
443TCP_RFC7413		opt_inet.h
444TCP_RFC7413_MAX_KEYS	opt_inet.h
445TCP_SIGNATURE		opt_inet.h
446VLAN_ARRAY		opt_vlan.h
447XBONEHACK
448FLOWTABLE		opt_route.h
449FLOWTABLE_HASH_ALL	opt_route.h
450
451#
452# SCTP
453#
454SCTP			opt_sctp.h
455SCTP_DEBUG		opt_sctp.h # Enable debug printfs
456SCTP_WITH_NO_CSUM	opt_sctp.h # Use this at your peril
457SCTP_LOCK_LOGGING	opt_sctp.h # Log to KTR lock activity
458SCTP_MBUF_LOGGING	opt_sctp.h # Log to KTR general mbuf aloc/free
459SCTP_MBCNT_LOGGING	opt_sctp.h # Log to KTR mbcnt activity
460SCTP_PACKET_LOGGING	opt_sctp.h # Log to a packet buffer last N packets
461SCTP_LTRACE_CHUNKS	opt_sctp.h # Log to KTR chunks processed
462SCTP_LTRACE_ERRORS	opt_sctp.h # Log to KTR error returns.
463SCTP_USE_PERCPU_STAT	opt_sctp.h # Use per cpu stats.
464SCTP_MCORE_INPUT	opt_sctp.h # Have multiple input threads for input mbufs
465SCTP_LOCAL_TRACE_BUF	opt_sctp.h # Use tracebuffer exported via sysctl
466SCTP_DETAILED_STR_STATS	opt_sctp.h # Use per PR-SCTP policy stream stats
467#
468#
469#
470
471# Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
472# Each netgraph node type can be either be compiled into the kernel
473# or loaded dynamically. To get the former, include the corresponding
474# option below. Each type has its own man page, e.g. ng_async(4).
475NETGRAPH
476NETGRAPH_DEBUG		opt_netgraph.h
477NETGRAPH_ASYNC		opt_netgraph.h
478NETGRAPH_ATMLLC		opt_netgraph.h
479NETGRAPH_ATM_ATMPIF	opt_netgraph.h
480NETGRAPH_BLUETOOTH	opt_netgraph.h
481NETGRAPH_BLUETOOTH_BT3C	opt_netgraph.h
482NETGRAPH_BLUETOOTH_H4	opt_netgraph.h
483NETGRAPH_BLUETOOTH_HCI	opt_netgraph.h
484NETGRAPH_BLUETOOTH_L2CAP	opt_netgraph.h
485NETGRAPH_BLUETOOTH_SOCKET	opt_netgraph.h
486NETGRAPH_BLUETOOTH_UBT	opt_netgraph.h
487NETGRAPH_BLUETOOTH_UBTBCMFW	opt_netgraph.h
488NETGRAPH_BPF		opt_netgraph.h
489NETGRAPH_BRIDGE		opt_netgraph.h
490NETGRAPH_CAR		opt_netgraph.h
491NETGRAPH_CISCO		opt_netgraph.h
492NETGRAPH_DEFLATE	opt_netgraph.h
493NETGRAPH_DEVICE		opt_netgraph.h
494NETGRAPH_ECHO		opt_netgraph.h
495NETGRAPH_EIFACE		opt_netgraph.h
496NETGRAPH_ETHER		opt_netgraph.h
497NETGRAPH_ETHER_ECHO	opt_netgraph.h
498NETGRAPH_FEC		opt_netgraph.h
499NETGRAPH_FRAME_RELAY	opt_netgraph.h
500NETGRAPH_GIF		opt_netgraph.h
501NETGRAPH_GIF_DEMUX	opt_netgraph.h
502NETGRAPH_HOLE		opt_netgraph.h
503NETGRAPH_IFACE		opt_netgraph.h
504NETGRAPH_IP_INPUT	opt_netgraph.h
505NETGRAPH_IPFW		opt_netgraph.h
506NETGRAPH_KSOCKET	opt_netgraph.h
507NETGRAPH_L2TP		opt_netgraph.h
508NETGRAPH_LMI		opt_netgraph.h
509# MPPC compression requires proprietary files (not included)
510NETGRAPH_MPPC_COMPRESSION	opt_netgraph.h
511NETGRAPH_MPPC_ENCRYPTION	opt_netgraph.h
512NETGRAPH_NAT		opt_netgraph.h
513NETGRAPH_NETFLOW	opt_netgraph.h
514NETGRAPH_ONE2MANY	opt_netgraph.h
515NETGRAPH_PATCH		opt_netgraph.h
516NETGRAPH_PIPE		opt_netgraph.h
517NETGRAPH_PPP		opt_netgraph.h
518NETGRAPH_PPPOE		opt_netgraph.h
519NETGRAPH_PPTPGRE	opt_netgraph.h
520NETGRAPH_PRED1		opt_netgraph.h
521NETGRAPH_RFC1490	opt_netgraph.h
522NETGRAPH_SOCKET		opt_netgraph.h
523NETGRAPH_SPLIT		opt_netgraph.h
524NETGRAPH_SPPP		opt_netgraph.h
525NETGRAPH_TAG		opt_netgraph.h
526NETGRAPH_TCPMSS		opt_netgraph.h
527NETGRAPH_TEE		opt_netgraph.h
528NETGRAPH_TTY		opt_netgraph.h
529NETGRAPH_UI		opt_netgraph.h
530NETGRAPH_VJC		opt_netgraph.h
531NETGRAPH_VLAN		opt_netgraph.h
532
533# NgATM options
534NGATM_ATM		opt_netgraph.h
535NGATM_ATMBASE		opt_netgraph.h
536NGATM_SSCOP		opt_netgraph.h
537NGATM_SSCFU		opt_netgraph.h
538NGATM_UNI		opt_netgraph.h
539NGATM_CCATM		opt_netgraph.h
540
541# DRM options
542DRM_DEBUG		opt_drm.h
543
544TI_SF_BUF_JUMBO		opt_ti.h
545TI_JUMBO_HDRSPLIT	opt_ti.h
546
547# XXX Conflict: # of devices vs network protocol (Native ATM).
548# This makes "atm.h" unusable.
549NATM
550
551# DPT driver debug flags
552DPT_MEASURE_PERFORMANCE	opt_dpt.h
553DPT_RESET_HBA		opt_dpt.h
554
555# Misc debug flags.  Most of these should probably be replaced with
556# 'DEBUG', and then let people recompile just the interesting modules
557# with 'make CC="cc -DDEBUG"'.
558CLUSTERDEBUG		opt_debug_cluster.h
559DEBUG_1284		opt_ppb_1284.h
560VP0_DEBUG		opt_vpo.h
561LPT_DEBUG		opt_lpt.h
562PLIP_DEBUG		opt_plip.h
563LOCKF_DEBUG		opt_debug_lockf.h
564SI_DEBUG		opt_debug_si.h
565IFMEDIA_DEBUG		opt_ifmedia.h
566
567# Fb options
568FB_DEBUG		opt_fb.h
569FB_INSTALL_CDEV		opt_fb.h
570
571# ppbus related options
572PERIPH_1284		opt_ppb_1284.h
573DONTPROBE_1284		opt_ppb_1284.h
574
575# smbus related options
576ENABLE_ALART		opt_intpm.h
577
578# These cause changes all over the kernel
579BLKDEV_IOSIZE		opt_global.h
580BURN_BRIDGES		opt_global.h
581DEBUG			opt_global.h
582DEBUG_LOCKS		opt_global.h
583DEBUG_VFS_LOCKS		opt_global.h
584DFLTPHYS		opt_global.h
585DIAGNOSTIC		opt_global.h
586INVARIANT_SUPPORT	opt_global.h
587INVARIANTS		opt_global.h
588MAXCPU			opt_global.h
589MAXMEMDOM		opt_global.h
590MAXPHYS			opt_global.h
591MCLSHIFT		opt_global.h
592MUTEX_DEBUG		opt_global.h
593MUTEX_NOINLINE		opt_global.h
594LOCK_PROFILING		opt_global.h
595LOCK_PROFILING_FAST	opt_global.h
596MSIZE			opt_global.h
597REGRESSION		opt_global.h
598RWLOCK_NOINLINE		opt_global.h
599SX_NOINLINE		opt_global.h
600VFS_BIO_DEBUG		opt_global.h
601
602# These are VM related options
603VM_KMEM_SIZE		opt_vm.h
604VM_KMEM_SIZE_SCALE	opt_vm.h
605VM_KMEM_SIZE_MAX	opt_vm.h
606VM_NRESERVLEVEL		opt_vm.h
607VM_LEVEL_0_ORDER	opt_vm.h
608NO_SWAPPING		opt_vm.h
609MALLOC_MAKE_FAILURES	opt_vm.h
610MALLOC_PROFILE		opt_vm.h
611MALLOC_DEBUG_MAXZONES	opt_vm.h
612
613# The MemGuard replacement allocator used for tamper-after-free detection
614DEBUG_MEMGUARD		opt_vm.h
615
616# The RedZone malloc(9) protection
617DEBUG_REDZONE		opt_vm.h
618
619# Standard SMP options
620SMP			opt_global.h
621
622# Size of the kernel message buffer
623MSGBUF_SIZE		opt_msgbuf.h
624
625# NFS options
626NFS_MINATTRTIMO		opt_nfs.h
627NFS_MAXATTRTIMO		opt_nfs.h
628NFS_MINDIRATTRTIMO	opt_nfs.h
629NFS_MAXDIRATTRTIMO	opt_nfs.h
630NFS_DEBUG		opt_nfs.h
631
632# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
633OVERRIDE_CARD			opt_bktr.h
634OVERRIDE_TUNER			opt_bktr.h
635OVERRIDE_DBX			opt_bktr.h
636OVERRIDE_MSP			opt_bktr.h
637BROOKTREE_SYSTEM_DEFAULT	opt_bktr.h
638BROOKTREE_ALLOC_PAGES		opt_bktr.h
639BKTR_OVERRIDE_CARD		opt_bktr.h
640BKTR_OVERRIDE_TUNER		opt_bktr.h
641BKTR_OVERRIDE_DBX		opt_bktr.h
642BKTR_OVERRIDE_MSP		opt_bktr.h
643BKTR_SYSTEM_DEFAULT		opt_bktr.h
644BKTR_ALLOC_PAGES		opt_bktr.h
645BKTR_USE_PLL			opt_bktr.h
646BKTR_GPIO_ACCESS		opt_bktr.h
647BKTR_NO_MSP_RESET		opt_bktr.h
648BKTR_430_FX_MODE		opt_bktr.h
649BKTR_SIS_VIA_MODE		opt_bktr.h
650BKTR_USE_FREEBSD_SMBUS		opt_bktr.h
651BKTR_NEW_MSP34XX_DRIVER		opt_bktr.h
652
653# Options for uart(4)
654UART_PPS_ON_CTS		opt_uart.h
655UART_POLL_FREQ		opt_uart.h
656UART_DEV_TOLERANCE_PCT	opt_uart.h
657
658# options for bus/device framework
659BUS_DEBUG		opt_bus.h
660
661# options for USB support
662USB_DEBUG		opt_usb.h
663USB_HOST_ALIGN		opt_usb.h
664USB_REQ_DEBUG		opt_usb.h
665USB_TEMPLATE		opt_usb.h
666USB_VERBOSE		opt_usb.h
667USB_DMA_SINGLE_ALLOC	opt_usb.h
668USB_EHCI_BIG_ENDIAN_DESC	opt_usb.h
669U3G_DEBUG		opt_u3g.h
670UKBD_DFLT_KEYMAP	opt_ukbd.h
671UPLCOM_INTR_INTERVAL	opt_uplcom.h
672UVSCOM_DEFAULT_OPKTSIZE	opt_uvscom.h
673UVSCOM_INTR_INTERVAL	opt_uvscom.h
674
675# Embedded system options
676INIT_PATH
677
678ROOTDEVNAME
679
680FDC_DEBUG		opt_fdc.h
681PCFCLOCK_VERBOSE	opt_pcfclock.h
682PCFCLOCK_MAX_RETRIES	opt_pcfclock.h
683
684KTR			opt_global.h
685KTR_ALQ			opt_ktr.h
686KTR_MASK		opt_ktr.h
687KTR_CPUMASK		opt_ktr.h
688KTR_COMPILE		opt_global.h
689KTR_BOOT_ENTRIES	opt_global.h
690KTR_ENTRIES		opt_global.h
691KTR_VERBOSE		opt_ktr.h
692WITNESS			opt_global.h
693WITNESS_KDB		opt_witness.h
694WITNESS_NO_VNODE	opt_witness.h
695WITNESS_SKIPSPIN	opt_witness.h
696WITNESS_COUNT		opt_witness.h
697OPENSOLARIS_WITNESS	opt_global.h
698
699# options for ACPI support
700ACPI_DEBUG		opt_acpi.h
701ACPI_MAX_TASKS		opt_acpi.h
702ACPI_MAX_THREADS	opt_acpi.h
703ACPI_DMAR		opt_acpi.h
704DEV_ACPI		opt_acpi.h
705
706# ISA support
707DEV_ISA			opt_isa.h
708ISAPNP			opt_isa.h
709
710# various 'device presence' options.
711DEV_BPF			opt_bpf.h
712DEV_CARP		opt_carp.h
713DEV_MCA			opt_mca.h
714DEV_NETMAP		opt_global.h
715DEV_PCI			opt_pci.h
716DEV_PF			opt_pf.h
717DEV_PFLOG		opt_pf.h
718DEV_PFSYNC		opt_pf.h
719DEV_RANDOM		opt_global.h
720DEV_SPLASH		opt_splash.h
721DEV_VLAN		opt_vlan.h
722
723# EISA support
724DEV_EISA		opt_eisa.h
725EISA_SLOTS		opt_eisa.h
726
727# ed driver
728ED_HPP			opt_ed.h
729ED_3C503		opt_ed.h
730ED_SIC			opt_ed.h
731
732# bce driver
733BCE_DEBUG		opt_bce.h
734BCE_NVRAM_WRITE_SUPPORT	opt_bce.h
735
736SOCKBUF_DEBUG		opt_global.h
737
738
739# options for ubsec driver
740UBSEC_DEBUG		opt_ubsec.h
741UBSEC_RNDTEST		opt_ubsec.h
742UBSEC_NO_RNG		opt_ubsec.h
743
744# options for hifn driver
745HIFN_DEBUG		opt_hifn.h
746HIFN_RNDTEST		opt_hifn.h
747
748# options for safenet driver
749SAFE_DEBUG		opt_safe.h
750SAFE_NO_RNG		opt_safe.h
751SAFE_RNDTEST		opt_safe.h
752
753# syscons/vt options
754MAXCONS			opt_syscons.h
755SC_ALT_MOUSE_IMAGE	opt_syscons.h
756SC_CUT_SPACES2TABS	opt_syscons.h
757SC_CUT_SEPCHARS		opt_syscons.h
758SC_DEBUG_LEVEL		opt_syscons.h
759SC_DFLT_FONT		opt_syscons.h
760SC_DISABLE_KDBKEY	opt_syscons.h
761SC_DISABLE_REBOOT	opt_syscons.h
762SC_HISTORY_SIZE		opt_syscons.h
763SC_KERNEL_CONS_ATTR	opt_syscons.h
764SC_KERNEL_CONS_REV_ATTR	opt_syscons.h
765SC_MOUSE_CHAR		opt_syscons.h
766SC_NO_CUTPASTE		opt_syscons.h
767SC_NO_FONT_LOADING	opt_syscons.h
768SC_NO_HISTORY		opt_syscons.h
769SC_NO_MODE_CHANGE	opt_syscons.h
770SC_NO_SUSPEND_VTYSWITCH	opt_syscons.h
771SC_NO_SYSMOUSE		opt_syscons.h
772SC_NORM_ATTR		opt_syscons.h
773SC_NORM_REV_ATTR	opt_syscons.h
774SC_PIXEL_MODE		opt_syscons.h
775SC_RENDER_DEBUG		opt_syscons.h
776SC_TWOBUTTON_MOUSE	opt_syscons.h
777VT_ALT_TO_ESC_HACK	opt_syscons.h
778VT_FB_DEFAULT_WIDTH	opt_syscons.h
779VT_FB_DEFAULT_HEIGHT	opt_syscons.h
780VT_MAXWINDOWS		opt_syscons.h
781VT_TWOBUTTON_MOUSE	opt_syscons.h
782DEV_SC			opt_syscons.h
783DEV_VT			opt_syscons.h
784
785# teken terminal emulator options
786TEKEN_CONS25		opt_teken.h
787TEKEN_UTF8		opt_teken.h
788TERMINAL_KERN_ATTR	opt_teken.h
789TERMINAL_NORM_ATTR	opt_teken.h
790
791# options for printf
792PRINTF_BUFR_SIZE	opt_printf.h
793
794# kbd options
795KBD_DISABLE_KEYMAP_LOAD	opt_kbd.h
796KBD_INSTALL_CDEV	opt_kbd.h
797KBD_MAXRETRY		opt_kbd.h
798KBD_MAXWAIT		opt_kbd.h
799KBD_RESETDELAY		opt_kbd.h
800KBDIO_DEBUG		opt_kbd.h
801
802# options for the Atheros driver
803ATH_DEBUG		opt_ath.h
804ATH_TXBUF		opt_ath.h
805ATH_RXBUF		opt_ath.h
806ATH_DIAGAPI		opt_ath.h
807ATH_TX99_DIAG		opt_ath.h
808ATH_ENABLE_11N		opt_ath.h
809ATH_ENABLE_DFS		opt_ath.h
810ATH_EEPROM_FIRMWARE	opt_ath.h
811ATH_ENABLE_RADIOTAP_VENDOR_EXT	opt_ath.h
812ATH_DEBUG_ALQ		opt_ath.h
813ATH_KTR_INTR_DEBUG	opt_ath.h
814
815# options for the Atheros hal
816AH_SUPPORT_AR5416	opt_ah.h
817# XXX For now, this breaks non-AR9130 chipsets, so only use it
818# XXX when actually targetting AR9130.
819AH_SUPPORT_AR9130	opt_ah.h
820
821# This is required for AR933x SoC support
822AH_SUPPORT_AR9330	opt_ah.h
823AH_SUPPORT_AR9340	opt_ah.h
824AH_SUPPORT_QCA9530	opt_ah.h
825AH_SUPPORT_QCA9550	opt_ah.h
826
827AH_DEBUG		opt_ah.h
828AH_ASSERT		opt_ah.h
829AH_DEBUG_ALQ		opt_ah.h
830AH_REGOPS_FUNC		opt_ah.h
831AH_WRITE_REGDOMAIN	opt_ah.h
832AH_DEBUG_COUNTRY	opt_ah.h
833AH_WRITE_EEPROM		opt_ah.h
834AH_PRIVATE_DIAG		opt_ah.h
835AH_NEED_DESC_SWAP	opt_ah.h
836AH_USE_INIPDGAIN	opt_ah.h
837AH_MAXCHAN		opt_ah.h
838AH_RXCFG_SDMAMW_4BYTES	opt_ah.h
839AH_INTERRUPT_DEBUGGING	opt_ah.h
840# AR5416 and later interrupt mitigation
841# XXX do not use this for AR9130
842AH_AR5416_INTERRUPT_MITIGATION	opt_ah.h
843
844# options for the Broadcom BCM43xx driver (bwi)
845BWI_DEBUG		opt_bwi.h
846BWI_DEBUG_VERBOSE	opt_bwi.h
847
848# options for the Marvell 8335 wireless driver
849MALO_DEBUG		opt_malo.h
850MALO_TXBUF		opt_malo.h
851MALO_RXBUF		opt_malo.h
852
853# options for the Marvell wireless driver
854MWL_DEBUG		opt_mwl.h
855MWL_TXBUF		opt_mwl.h
856MWL_RXBUF		opt_mwl.h
857MWL_DIAGAPI		opt_mwl.h
858MWL_AGGR_SIZE		opt_mwl.h
859MWL_TX_NODROP		opt_mwl.h
860
861# Options for the Intel 802.11ac wireless driver
862IWM_DEBUG		opt_iwm.h
863
864# Options for the Intel 802.11n wireless driver
865IWN_DEBUG		opt_iwn.h
866
867# Options for the Intel 3945ABG wireless driver
868WPI_DEBUG		opt_wpi.h
869
870# dcons options
871DCONS_BUF_SIZE		opt_dcons.h
872DCONS_POLL_HZ		opt_dcons.h
873DCONS_FORCE_CONSOLE	opt_dcons.h
874DCONS_FORCE_GDB		opt_dcons.h
875
876# HWPMC options
877HWPMC_DEBUG		opt_global.h
878HWPMC_HOOKS
879HWPMC_MIPS_BACKTRACE 	opt_hwpmc_hooks.h
880
881# XBOX options for FreeBSD/i386, but some files are MI
882XBOX			opt_xbox.h
883
884# Interrupt filtering
885INTR_FILTER
886
887# 802.11 support layer
888IEEE80211_DEBUG		opt_wlan.h
889IEEE80211_DEBUG_REFCNT	opt_wlan.h
890IEEE80211_AMPDU_AGE	opt_wlan.h
891IEEE80211_SUPPORT_MESH	opt_wlan.h
892IEEE80211_SUPPORT_SUPERG	opt_wlan.h
893IEEE80211_SUPPORT_TDMA	opt_wlan.h
894IEEE80211_ALQ		opt_wlan.h
895IEEE80211_DFS_DEBUG	opt_wlan.h
896
897# 802.11 TDMA support
898TDMA_SLOTLEN_DEFAULT	opt_tdma.h
899TDMA_SLOTCNT_DEFAULT	opt_tdma.h
900TDMA_BINTVAL_DEFAULT	opt_tdma.h
901TDMA_TXRATE_11B_DEFAULT	opt_tdma.h
902TDMA_TXRATE_11G_DEFAULT	opt_tdma.h
903TDMA_TXRATE_11A_DEFAULT	opt_tdma.h
904TDMA_TXRATE_TURBO_DEFAULT	opt_tdma.h
905TDMA_TXRATE_HALF_DEFAULT	opt_tdma.h
906TDMA_TXRATE_QUARTER_DEFAULT	opt_tdma.h
907TDMA_TXRATE_11NA_DEFAULT	opt_tdma.h
908TDMA_TXRATE_11NG_DEFAULT	opt_tdma.h
909
910# VideoMode
911PICKMODE_DEBUG			opt_videomode.h
912
913# Network stack virtualization options
914VIMAGE			opt_global.h
915VNET_DEBUG		opt_global.h
916
917# Common Flash Interface (CFI) options
918CFI_SUPPORT_STRATAFLASH	opt_cfi.h
919CFI_ARMEDANDDANGEROUS	opt_cfi.h
920
921# Sound options
922SND_DEBUG		opt_snd.h
923SND_DIAGNOSTIC		opt_snd.h
924SND_FEEDER_MULTIFORMAT	opt_snd.h
925SND_FEEDER_FULL_MULTIFORMAT	opt_snd.h
926SND_FEEDER_RATE_HP	opt_snd.h
927SND_PCM_64		opt_snd.h
928SND_OLDSTEREO		opt_snd.h
929
930X86BIOS
931
932# Flattened device tree options
933FDT		opt_platform.h
934FDT_DTB_STATIC	opt_platform.h
935
936# OFED Infiniband stack
937OFED		opt_ofed.h
938OFED_DEBUG_INIT	opt_ofed.h
939SDP		opt_ofed.h
940SDP_DEBUG	opt_ofed.h
941IPOIB		opt_ofed.h
942IPOIB_DEBUG	opt_ofed.h
943IPOIB_CM	opt_ofed.h
944
945# Resource Accounting
946RACCT		opt_global.h
947RACCT_DEFAULT_TO_DISABLED	opt_global.h
948
949# Resource Limits
950RCTL		opt_global.h
951
952# Random number generator(s)
953# Which CSPRNG hash we get.
954# If Yarrow is not chosen, Fortuna is selected.
955RANDOM_YARROW	opt_global.h
956# With this, no entropy processor is loaded, but the entropy
957# harvesting infrastructure is present. This means an entropy
958# processor may be loaded as a module.
959RANDOM_LOADABLE	opt_global.h
960# This turns on high-rate and potentially expensive harvesting in
961# the uma slab allocator.
962RANDOM_ENABLE_UMA	opt_global.h
963
964# Intel em(4) driver
965EM_MULTIQUEUE	opt_em.h
966