1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affects only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AACRAID_DEBUG opt_aacraid.h 35AHC_ALLOW_MEMIO opt_aic7xxx.h 36AHC_TMODE_ENABLE opt_aic7xxx.h 37AHC_DUMP_EEPROM opt_aic7xxx.h 38AHC_DEBUG opt_aic7xxx.h 39AHC_DEBUG_OPTS opt_aic7xxx.h 40AHC_REG_PRETTY_PRINT opt_aic7xxx.h 41AHD_DEBUG opt_aic79xx.h 42AHD_DEBUG_OPTS opt_aic79xx.h 43AHD_TMODE_ENABLE opt_aic79xx.h 44AHD_REG_PRETTY_PRINT opt_aic79xx.h 45ADW_ALLOW_MEMIO opt_adw.h 46 47TWA_DEBUG opt_twa.h 48TWA_FLASH_FIRMWARE opt_twa.h 49 50# Debugging options. 51ALT_BREAK_TO_DEBUGGER opt_kdb.h 52BREAK_TO_DEBUGGER opt_kdb.h 53DDB 54DDB_BUFR_SIZE opt_ddb.h 55DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 56DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 57DDB_CTF opt_ddb.h 58DDB_NUMSYM opt_ddb.h 59GDB 60KDB opt_global.h 61KDB_TRACE opt_kdb.h 62KDB_UNATTENDED opt_kdb.h 63KLD_DEBUG opt_kld.h 64SYSCTL_DEBUG opt_sysctl.h 65EARLY_PRINTF opt_global.h 66TEXTDUMP_PREFERRED opt_ddb.h 67TEXTDUMP_VERBOSE opt_ddb.h 68 69# Miscellaneous options. 70ADAPTIVE_LOCKMGRS 71ALQ 72ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h 73ATSE_CFI_HACK opt_cfi.h 74AUDIT opt_global.h 75BOOTHOWTO opt_global.h 76BOOTVERBOSE opt_global.h 77CALLOUT_PROFILING 78CAPABILITIES opt_capsicum.h 79CAPABILITY_MODE opt_capsicum.h 80COMPAT_43 opt_compat.h 81COMPAT_43TTY opt_compat.h 82COMPAT_FREEBSD4 opt_compat.h 83COMPAT_FREEBSD5 opt_compat.h 84COMPAT_FREEBSD6 opt_compat.h 85COMPAT_FREEBSD7 opt_compat.h 86COMPILING_LINT opt_global.h 87COMPRESS_USER_CORES opt_core.h 88CY_PCI_FASTINTR 89DEADLKRES opt_watchdog.h 90DIRECTIO 91FILEMON opt_dontuse.h 92FFCLOCK 93FULL_PREEMPTION opt_sched.h 94IMAGACT_BINMISC opt_dontuse.h 95IPI_PREEMPTION opt_sched.h 96GEOM_AES opt_geom.h 97GEOM_BDE opt_geom.h 98GEOM_BSD opt_geom.h 99GEOM_CACHE opt_geom.h 100GEOM_CONCAT opt_geom.h 101GEOM_ELI opt_geom.h 102GEOM_FOX opt_geom.h 103GEOM_GATE opt_geom.h 104GEOM_JOURNAL opt_geom.h 105GEOM_LABEL opt_geom.h 106GEOM_LABEL_GPT opt_geom.h 107GEOM_LINUX_LVM opt_geom.h 108GEOM_MBR opt_geom.h 109GEOM_MIRROR opt_geom.h 110GEOM_MULTIPATH opt_geom.h 111GEOM_NOP opt_geom.h 112GEOM_PART_APM opt_geom.h 113GEOM_PART_BSD opt_geom.h 114GEOM_PART_EBR opt_geom.h 115GEOM_PART_EBR_COMPAT opt_geom.h 116GEOM_PART_GPT opt_geom.h 117GEOM_PART_LDM opt_geom.h 118GEOM_PART_MBR opt_geom.h 119GEOM_PART_PC98 opt_geom.h 120GEOM_PART_VTOC8 opt_geom.h 121GEOM_PC98 opt_geom.h 122GEOM_RAID opt_geom.h 123GEOM_RAID3 opt_geom.h 124GEOM_SHSEC opt_geom.h 125GEOM_STRIPE opt_geom.h 126GEOM_SUNLABEL opt_geom.h 127GEOM_UNCOMPRESS opt_geom.h 128GEOM_UZIP opt_geom.h 129GEOM_VINUM opt_geom.h 130GEOM_VIRSTOR opt_geom.h 131GEOM_VOL opt_geom.h 132GEOM_ZERO opt_geom.h 133KDTRACE_HOOKS opt_global.h 134KDTRACE_FRAME opt_kdtrace.h 135KN_HASHSIZE opt_kqueue.h 136KSTACK_MAX_PAGES 137KSTACK_PAGES 138KTRACE 139KTRACE_REQUEST_POOL opt_ktrace.h 140LIBICONV 141MAC opt_global.h 142MAC_BIBA opt_dontuse.h 143MAC_BSDEXTENDED opt_dontuse.h 144MAC_IFOFF opt_dontuse.h 145MAC_LOMAC opt_dontuse.h 146MAC_MLS opt_dontuse.h 147MAC_NONE opt_dontuse.h 148MAC_PARTITION opt_dontuse.h 149MAC_PORTACL opt_dontuse.h 150MAC_SEEOTHERUIDS opt_dontuse.h 151MAC_STATIC opt_mac.h 152MAC_STUB opt_dontuse.h 153MAC_TEST opt_dontuse.h 154MD_ROOT opt_md.h 155MD_ROOT_FSTYPE opt_md.h 156MD_ROOT_SIZE opt_md.h 157MFI_DEBUG opt_mfi.h 158MFI_DECODE_LOG opt_mfi.h 159MPROF_BUFFERS opt_mprof.h 160MPROF_HASH_SIZE opt_mprof.h 161NEW_PCIB opt_global.h 162NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 163NO_ADAPTIVE_RWLOCKS 164NO_ADAPTIVE_SX 165NO_EVENTTIMERS opt_timer.h 166NO_SYSCTL_DESCR opt_global.h 167NSWBUF_MIN opt_swap.h 168MBUF_PACKET_ZONE_DISABLE opt_global.h 169PANIC_REBOOT_WAIT_TIME opt_panic.h 170PPC_DEBUG opt_ppc.h 171PPC_PROBE_CHIPSET opt_ppc.h 172PPS_SYNC opt_ntp.h 173PREEMPTION opt_sched.h 174QUOTA 175SCHED_4BSD opt_sched.h 176SCHED_STATS opt_sched.h 177SCHED_ULE opt_sched.h 178SLEEPQUEUE_PROFILING 179SLHCI_DEBUG opt_slhci.h 180SPX_HACK 181STACK opt_stack.h 182SUIDDIR 183MSGMNB opt_sysvipc.h 184MSGMNI opt_sysvipc.h 185MSGSEG opt_sysvipc.h 186MSGSSZ opt_sysvipc.h 187MSGTQL opt_sysvipc.h 188SEMMNI opt_sysvipc.h 189SEMMNS opt_sysvipc.h 190SEMMNU opt_sysvipc.h 191SEMMSL opt_sysvipc.h 192SEMOPM opt_sysvipc.h 193SEMUME opt_sysvipc.h 194SHMALL opt_sysvipc.h 195SHMMAX opt_sysvipc.h 196SHMMAXPGS opt_sysvipc.h 197SHMMIN opt_sysvipc.h 198SHMMNI opt_sysvipc.h 199SHMSEG opt_sysvipc.h 200SYSVMSG opt_sysvipc.h 201SYSVSEM opt_sysvipc.h 202SYSVSHM opt_sysvipc.h 203SW_WATCHDOG opt_watchdog.h 204TURNSTILE_PROFILING 205UMTX_PROFILING 206VFS_AIO 207VERBOSE_SYSINIT opt_global.h 208WLCACHE opt_wavelan.h 209WLDEBUG opt_wavelan.h 210 211# POSIX kernel options 212P1003_1B_MQUEUE opt_posix.h 213P1003_1B_SEMAPHORES opt_posix.h 214_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 215 216# Do we want the config file compiled into the kernel? 217INCLUDE_CONFIG_FILE opt_config.h 218 219# Options for static filesystems. These should only be used at config 220# time, since the corresponding lkms cannot work if there are any static 221# dependencies. Unusability is enforced by hiding the defines for the 222# options in a never-included header. 223CD9660 opt_dontuse.h 224EXT2FS opt_dontuse.h 225FDESCFS opt_dontuse.h 226FFS opt_dontuse.h 227FUSE opt_dontuse.h 228MSDOSFS opt_dontuse.h 229NANDFS opt_dontuse.h 230NULLFS opt_dontuse.h 231PROCFS opt_dontuse.h 232PSEUDOFS opt_dontuse.h 233REISERFS opt_dontuse.h 234SMBFS opt_dontuse.h 235TMPFS opt_dontuse.h 236UDF opt_dontuse.h 237UNIONFS opt_dontuse.h 238ZFS opt_dontuse.h 239 240# Pseudofs debugging 241PSEUDOFS_TRACE opt_pseudofs.h 242 243# In-kernel GSS-API 244KGSSAPI opt_kgssapi.h 245KGSSAPI_DEBUG opt_kgssapi.h 246 247# These static filesystems have one slightly bogus static dependency in 248# sys/i386/i386/autoconf.c. If any of these filesystems are 249# statically compiled into the kernel, code for mounting them as root 250# filesystems will be enabled - but look below. 251NFSCLIENT opt_nfs.h 252NFSSERVER opt_nfs.h 253 254# Use these options to compile the experimental nfs client and/or 255# server that supports NFSv4 into a kernel. 256# NFSCL - client 257# NFSD - server 258NFSCL opt_nfs.h 259NFSD opt_nfs.h 260 261# filesystems and libiconv bridge 262CD9660_ICONV opt_dontuse.h 263MSDOSFS_ICONV opt_dontuse.h 264UDF_ICONV opt_dontuse.h 265 266# If you are following the conditions in the copyright, 267# you can enable soft-updates which will speed up a lot of thigs 268# and make the system safer from crashes at the same time. 269# otherwise a STUB module will be compiled in. 270SOFTUPDATES opt_ffs.h 271 272# On small, embedded systems, it can be useful to turn off support for 273# snapshots. It saves about 30-40k for a feature that would be lightly 274# used, if it is used at all. 275NO_FFS_SNAPSHOT opt_ffs.h 276 277# Enabling this option turns on support for Access Control Lists in UFS, 278# which can be used to support high security configurations. Depends on 279# UFS_EXTATTR. 280UFS_ACL opt_ufs.h 281 282# Enabling this option turns on support for extended attributes in UFS-based 283# filesystems, which can be used to support high security configurations 284# as well as new filesystem features. 285UFS_EXTATTR opt_ufs.h 286UFS_EXTATTR_AUTOSTART opt_ufs.h 287 288# Enable fast hash lookups for large directories on UFS-based filesystems. 289UFS_DIRHASH opt_ufs.h 290 291# Enable gjournal-based UFS journal. 292UFS_GJOURNAL opt_ufs.h 293 294# The below sentence is not in English, and neither is this one. 295# We plan to remove the static dependences above, with a 296# <filesystem>_ROOT option to control if it usable as root. This list 297# allows these options to be present in config files already (though 298# they won't make any difference yet). 299NFS_ROOT opt_nfsroot.h 300 301# SMB/CIFS requester 302NETSMB opt_netsmb.h 303 304# Options used only in subr_param.c. 305HZ opt_param.h 306MAXFILES opt_param.h 307NBUF opt_param.h 308NSFBUFS opt_param.h 309VM_BCACHE_SIZE_MAX opt_param.h 310VM_SWZONE_SIZE_MAX opt_param.h 311MAXUSERS 312DFLDSIZ opt_param.h 313MAXDSIZ opt_param.h 314MAXSSIZ opt_param.h 315 316# Generic SCSI options. 317CAM_MAX_HIGHPOWER opt_cam.h 318CAMDEBUG opt_cam.h 319CAM_DEBUG_COMPILE opt_cam.h 320CAM_DEBUG_DELAY opt_cam.h 321CAM_DEBUG_BUS opt_cam.h 322CAM_DEBUG_TARGET opt_cam.h 323CAM_DEBUG_LUN opt_cam.h 324CAM_DEBUG_FLAGS opt_cam.h 325CAM_BOOT_DELAY opt_cam.h 326SCSI_DELAY opt_scsi.h 327SCSI_NO_SENSE_STRINGS opt_scsi.h 328SCSI_NO_OP_STRINGS opt_scsi.h 329 330# Options used only in cam/ata/ata_da.c 331ADA_TEST_FAILURE opt_ada.h 332ATA_STATIC_ID opt_ada.h 333 334# Options used only in cam/scsi/scsi_cd.c 335CHANGER_MIN_BUSY_SECONDS opt_cd.h 336CHANGER_MAX_BUSY_SECONDS opt_cd.h 337 338# Options used only in cam/scsi/scsi_sa.c. 339SA_IO_TIMEOUT opt_sa.h 340SA_SPACE_TIMEOUT opt_sa.h 341SA_REWIND_TIMEOUT opt_sa.h 342SA_ERASE_TIMEOUT opt_sa.h 343SA_1FM_AT_EOD opt_sa.h 344 345# Options used only in cam/scsi/scsi_pt.c 346SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 347 348# Options used only in cam/scsi/scsi_ses.c 349SES_ENABLE_PASSTHROUGH opt_ses.h 350 351# Options used in dev/sym/ (Symbios SCSI driver). 352SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 353 # Allows the ncr to take precedence 354 # 1 (1<<0) -> 810a, 860 355 # 2 (1<<1) -> 825a, 875, 885, 895 356 # 4 (1<<2) -> 895a, 896, 1510d 357SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 358 # disabled:0 (default), enabled:1 359SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 360 # disabled:0, enabled:1 (default) 361SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 362 # default:8, range:[1..64] 363 364# Options used only in pci/ncr.c 365SCSI_NCR_DEBUG opt_ncr.h 366SCSI_NCR_MAX_SYNC opt_ncr.h 367SCSI_NCR_MAX_WIDE opt_ncr.h 368SCSI_NCR_MYADDR opt_ncr.h 369 370# Options used only in dev/isp/* 371ISP_TARGET_MODE opt_isp.h 372ISP_FW_CRASH_DUMP opt_isp.h 373ISP_DEFAULT_ROLES opt_isp.h 374ISP_INTERNAL_TARGET opt_isp.h 375 376# Options used only in dev/iscsi 377ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 378 379# Net stuff. 380ACCEPT_FILTER_DATA 381ACCEPT_FILTER_DNS 382ACCEPT_FILTER_HTTP 383ALTQ opt_global.h 384ALTQ_CBQ opt_altq.h 385ALTQ_CDNR opt_altq.h 386ALTQ_DEBUG opt_altq.h 387ALTQ_HFSC opt_altq.h 388ALTQ_NOPCC opt_altq.h 389ALTQ_PRIQ opt_altq.h 390ALTQ_RED opt_altq.h 391ALTQ_RIO opt_altq.h 392BOOTP opt_bootp.h 393BOOTP_BLOCKSIZE opt_bootp.h 394BOOTP_COMPAT opt_bootp.h 395BOOTP_NFSROOT opt_bootp.h 396BOOTP_NFSV3 opt_bootp.h 397BOOTP_WIRED_TO opt_bootp.h 398DEVICE_POLLING 399DEV_ENC opt_enc.h 400DEV_PF opt_pf.h 401DEV_PFLOG opt_pf.h 402DEV_PFSYNC opt_pf.h 403DEV_VLAN opt_vlan.h 404DUMMYNET opt_ipdn.h 405INET opt_inet.h 406INET6 opt_inet6.h 407IPDIVERT 408IPFILTER opt_ipfilter.h 409IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 410IPFILTER_LOG opt_ipfilter.h 411IPFILTER_LOOKUP opt_ipfilter.h 412IPFIREWALL opt_ipfw.h 413IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 414IPFIREWALL_NAT opt_ipfw.h 415IPFIREWALL_VERBOSE opt_ipfw.h 416IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 417IPSEC opt_ipsec.h 418IPSEC_DEBUG opt_ipsec.h 419IPSEC_FILTERTUNNEL opt_ipsec.h 420IPSEC_NAT_T opt_ipsec.h 421IPSTEALTH 422KRPC 423LIBALIAS 424LIBMBPOOL 425LIBMCHAIN 426MBUF_PROFILING 427MBUF_STRESS_TEST 428MROUTING opt_mrouting.h 429NFSLOCKD 430PCBGROUP opt_pcbgroup.h 431PF_DEFAULT_TO_DROP opt_pf.h 432RADIX_MPATH opt_mpath.h 433ROUTETABLES opt_route.h 434RSS opt_rss.h 435SLIP_IFF_OPTS opt_slip.h 436TCPDEBUG 437TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading 438TCP_SIGNATURE opt_inet.h 439VLAN_ARRAY opt_vlan.h 440XBONEHACK 441FLOWTABLE opt_route.h 442FLOWTABLE_HASH_ALL opt_route.h 443 444# 445# SCTP 446# 447SCTP opt_sctp.h 448SCTP_DEBUG opt_sctp.h # Enable debug printfs 449SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril 450SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 451SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 452SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 453SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 454SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 455SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 456SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 457SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 458# 459# 460# 461 462# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 463# Each netgraph node type can be either be compiled into the kernel 464# or loaded dynamically. To get the former, include the corresponding 465# option below. Each type has its own man page, e.g. ng_async(4). 466NETGRAPH 467NETGRAPH_DEBUG opt_netgraph.h 468NETGRAPH_ASYNC opt_netgraph.h 469NETGRAPH_ATMLLC opt_netgraph.h 470NETGRAPH_ATM_ATMPIF opt_netgraph.h 471NETGRAPH_BLUETOOTH opt_netgraph.h 472NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 473NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 474NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 475NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 476NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 477NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 478NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 479NETGRAPH_BPF opt_netgraph.h 480NETGRAPH_BRIDGE opt_netgraph.h 481NETGRAPH_CAR opt_netgraph.h 482NETGRAPH_CISCO opt_netgraph.h 483NETGRAPH_DEFLATE opt_netgraph.h 484NETGRAPH_DEVICE opt_netgraph.h 485NETGRAPH_ECHO opt_netgraph.h 486NETGRAPH_EIFACE opt_netgraph.h 487NETGRAPH_ETHER opt_netgraph.h 488NETGRAPH_ETHER_ECHO opt_netgraph.h 489NETGRAPH_FEC opt_netgraph.h 490NETGRAPH_FRAME_RELAY opt_netgraph.h 491NETGRAPH_GIF opt_netgraph.h 492NETGRAPH_GIF_DEMUX opt_netgraph.h 493NETGRAPH_HOLE opt_netgraph.h 494NETGRAPH_IFACE opt_netgraph.h 495NETGRAPH_IP_INPUT opt_netgraph.h 496NETGRAPH_IPFW opt_netgraph.h 497NETGRAPH_KSOCKET opt_netgraph.h 498NETGRAPH_L2TP opt_netgraph.h 499NETGRAPH_LMI opt_netgraph.h 500# MPPC compression requires proprietary files (not included) 501NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 502NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 503NETGRAPH_NAT opt_netgraph.h 504NETGRAPH_NETFLOW opt_netgraph.h 505NETGRAPH_ONE2MANY opt_netgraph.h 506NETGRAPH_PATCH opt_netgraph.h 507NETGRAPH_PIPE opt_netgraph.h 508NETGRAPH_PPP opt_netgraph.h 509NETGRAPH_PPPOE opt_netgraph.h 510NETGRAPH_PPTPGRE opt_netgraph.h 511NETGRAPH_PRED1 opt_netgraph.h 512NETGRAPH_RFC1490 opt_netgraph.h 513NETGRAPH_SOCKET opt_netgraph.h 514NETGRAPH_SPLIT opt_netgraph.h 515NETGRAPH_SPPP opt_netgraph.h 516NETGRAPH_TAG opt_netgraph.h 517NETGRAPH_TCPMSS opt_netgraph.h 518NETGRAPH_TEE opt_netgraph.h 519NETGRAPH_TTY opt_netgraph.h 520NETGRAPH_UI opt_netgraph.h 521NETGRAPH_VJC opt_netgraph.h 522NETGRAPH_VLAN opt_netgraph.h 523 524# NgATM options 525NGATM_ATM opt_netgraph.h 526NGATM_ATMBASE opt_netgraph.h 527NGATM_SSCOP opt_netgraph.h 528NGATM_SSCFU opt_netgraph.h 529NGATM_UNI opt_netgraph.h 530NGATM_CCATM opt_netgraph.h 531 532# DRM options 533DRM_DEBUG opt_drm.h 534 535TI_SF_BUF_JUMBO opt_ti.h 536TI_JUMBO_HDRSPLIT opt_ti.h 537 538# XXX Conflict: # of devices vs network protocol (Native ATM). 539# This makes "atm.h" unusable. 540NATM 541 542# DPT driver debug flags 543DPT_MEASURE_PERFORMANCE opt_dpt.h 544DPT_RESET_HBA opt_dpt.h 545 546# Misc debug flags. Most of these should probably be replaced with 547# 'DEBUG', and then let people recompile just the interesting modules 548# with 'make CC="cc -DDEBUG"'. 549CLUSTERDEBUG opt_debug_cluster.h 550DEBUG_1284 opt_ppb_1284.h 551VP0_DEBUG opt_vpo.h 552LPT_DEBUG opt_lpt.h 553PLIP_DEBUG opt_plip.h 554LOCKF_DEBUG opt_debug_lockf.h 555SI_DEBUG opt_debug_si.h 556 557# Fb options 558FB_DEBUG opt_fb.h 559FB_INSTALL_CDEV opt_fb.h 560 561# ppbus related options 562PERIPH_1284 opt_ppb_1284.h 563DONTPROBE_1284 opt_ppb_1284.h 564 565# smbus related options 566ENABLE_ALART opt_intpm.h 567 568# These cause changes all over the kernel 569BLKDEV_IOSIZE opt_global.h 570BURN_BRIDGES opt_global.h 571DEBUG opt_global.h 572DEBUG_LOCKS opt_global.h 573DEBUG_VFS_LOCKS opt_global.h 574DFLTPHYS opt_global.h 575DIAGNOSTIC opt_global.h 576INVARIANT_SUPPORT opt_global.h 577INVARIANTS opt_global.h 578MAXCPU opt_global.h 579MAXMEMDOM opt_global.h 580MAXPHYS opt_global.h 581MCLSHIFT opt_global.h 582MUTEX_DEBUG opt_global.h 583MUTEX_NOINLINE opt_global.h 584LOCK_PROFILING opt_global.h 585LOCK_PROFILING_FAST opt_global.h 586MSIZE opt_global.h 587REGRESSION opt_global.h 588RWLOCK_NOINLINE opt_global.h 589SX_NOINLINE opt_global.h 590VFS_BIO_DEBUG opt_global.h 591 592# These are VM related options 593VM_KMEM_SIZE opt_vm.h 594VM_KMEM_SIZE_SCALE opt_vm.h 595VM_KMEM_SIZE_MAX opt_vm.h 596VM_NRESERVLEVEL opt_vm.h 597VM_LEVEL_0_ORDER opt_vm.h 598NO_SWAPPING opt_vm.h 599MALLOC_MAKE_FAILURES opt_vm.h 600MALLOC_PROFILE opt_vm.h 601MALLOC_DEBUG_MAXZONES opt_vm.h 602 603# The MemGuard replacement allocator used for tamper-after-free detection 604DEBUG_MEMGUARD opt_vm.h 605 606# The RedZone malloc(9) protection 607DEBUG_REDZONE opt_vm.h 608 609# Standard SMP options 610SMP opt_global.h 611 612# Size of the kernel message buffer 613MSGBUF_SIZE opt_msgbuf.h 614 615# NFS options 616NFS_MINATTRTIMO opt_nfs.h 617NFS_MAXATTRTIMO opt_nfs.h 618NFS_MINDIRATTRTIMO opt_nfs.h 619NFS_MAXDIRATTRTIMO opt_nfs.h 620NFS_GATHERDELAY opt_nfs.h 621NFS_WDELAYHASHSIZ opt_nfs.h 622NFS_DEBUG opt_nfs.h 623 624# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 625OVERRIDE_CARD opt_bktr.h 626OVERRIDE_TUNER opt_bktr.h 627OVERRIDE_DBX opt_bktr.h 628OVERRIDE_MSP opt_bktr.h 629BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 630BROOKTREE_ALLOC_PAGES opt_bktr.h 631BKTR_OVERRIDE_CARD opt_bktr.h 632BKTR_OVERRIDE_TUNER opt_bktr.h 633BKTR_OVERRIDE_DBX opt_bktr.h 634BKTR_OVERRIDE_MSP opt_bktr.h 635BKTR_SYSTEM_DEFAULT opt_bktr.h 636BKTR_ALLOC_PAGES opt_bktr.h 637BKTR_USE_PLL opt_bktr.h 638BKTR_GPIO_ACCESS opt_bktr.h 639BKTR_NO_MSP_RESET opt_bktr.h 640BKTR_430_FX_MODE opt_bktr.h 641BKTR_SIS_VIA_MODE opt_bktr.h 642BKTR_USE_FREEBSD_SMBUS opt_bktr.h 643BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 644 645# Options for uart(4) 646UART_PPS_ON_CTS opt_uart.h 647UART_POLL_FREQ opt_uart.h 648 649# options for bus/device framework 650BUS_DEBUG opt_bus.h 651 652# options for USB support 653USB_DEBUG opt_usb.h 654USB_HOST_ALIGN opt_usb.h 655USB_REQ_DEBUG opt_usb.h 656USB_TEMPLATE opt_usb.h 657USB_VERBOSE opt_usb.h 658USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 659U3G_DEBUG opt_u3g.h 660UKBD_DFLT_KEYMAP opt_ukbd.h 661UPLCOM_INTR_INTERVAL opt_uplcom.h 662UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 663UVSCOM_INTR_INTERVAL opt_uvscom.h 664 665# Embedded system options 666INIT_PATH 667 668ROOTDEVNAME 669 670FDC_DEBUG opt_fdc.h 671PCFCLOCK_VERBOSE opt_pcfclock.h 672PCFCLOCK_MAX_RETRIES opt_pcfclock.h 673 674KTR opt_global.h 675KTR_ALQ opt_ktr.h 676KTR_MASK opt_ktr.h 677KTR_CPUMASK opt_ktr.h 678KTR_COMPILE opt_global.h 679KTR_BOOT_ENTRIES opt_global.h 680KTR_ENTRIES opt_global.h 681KTR_VERBOSE opt_ktr.h 682WITNESS opt_global.h 683WITNESS_KDB opt_witness.h 684WITNESS_NO_VNODE opt_witness.h 685WITNESS_SKIPSPIN opt_witness.h 686OPENSOLARIS_WITNESS opt_global.h 687 688# options for ACPI support 689ACPI_DEBUG opt_acpi.h 690ACPI_MAX_TASKS opt_acpi.h 691ACPI_MAX_THREADS opt_acpi.h 692ACPI_DMAR opt_acpi.h 693 694# ISA support 695DEV_ISA opt_isa.h 696ISAPNP opt_isa.h 697 698# various 'device presence' options. 699DEV_BPF opt_bpf.h 700DEV_NETMAP opt_global.h 701DEV_MCA opt_mca.h 702DEV_CARP opt_carp.h 703DEV_SPLASH opt_splash.h 704 705# EISA support 706DEV_EISA opt_eisa.h 707EISA_SLOTS opt_eisa.h 708 709# ed driver 710ED_HPP opt_ed.h 711ED_3C503 opt_ed.h 712ED_SIC opt_ed.h 713 714# bce driver 715BCE_DEBUG opt_bce.h 716BCE_NVRAM_WRITE_SUPPORT opt_bce.h 717 718SOCKBUF_DEBUG opt_global.h 719 720 721# options for ubsec driver 722UBSEC_DEBUG opt_ubsec.h 723UBSEC_RNDTEST opt_ubsec.h 724UBSEC_NO_RNG opt_ubsec.h 725 726# options for hifn driver 727HIFN_DEBUG opt_hifn.h 728HIFN_RNDTEST opt_hifn.h 729 730# options for safenet driver 731SAFE_DEBUG opt_safe.h 732SAFE_NO_RNG opt_safe.h 733SAFE_RNDTEST opt_safe.h 734 735# syscons/vt options 736MAXCONS opt_syscons.h 737VT_FB_DEFAULT_WIDTH opt_syscons.h 738VT_FB_DEFAULT_HEIGHT opt_syscons.h 739SC_ALT_MOUSE_IMAGE opt_syscons.h 740SC_CUT_SPACES2TABS opt_syscons.h 741SC_CUT_SEPCHARS opt_syscons.h 742SC_DEBUG_LEVEL opt_syscons.h 743SC_DFLT_FONT opt_syscons.h 744SC_DISABLE_KDBKEY opt_syscons.h 745SC_DISABLE_REBOOT opt_syscons.h 746SC_HISTORY_SIZE opt_syscons.h 747SC_KERNEL_CONS_ATTR opt_syscons.h 748SC_KERNEL_CONS_REV_ATTR opt_syscons.h 749SC_MOUSE_CHAR opt_syscons.h 750SC_NO_CUTPASTE opt_syscons.h 751SC_NO_FONT_LOADING opt_syscons.h 752SC_NO_HISTORY opt_syscons.h 753SC_NO_MODE_CHANGE opt_syscons.h 754SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 755SC_NO_SYSMOUSE opt_syscons.h 756SC_NORM_ATTR opt_syscons.h 757SC_NORM_REV_ATTR opt_syscons.h 758SC_PIXEL_MODE opt_syscons.h 759SC_RENDER_DEBUG opt_syscons.h 760SC_TWOBUTTON_MOUSE opt_syscons.h 761DEV_SC opt_syscons.h 762DEV_VT opt_syscons.h 763 764 765# teken terminal emulator options 766TEKEN_CONS25 opt_teken.h 767TEKEN_UTF8 opt_teken.h 768 769# options for printf 770PRINTF_BUFR_SIZE opt_printf.h 771 772# kbd options 773KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 774KBD_INSTALL_CDEV opt_kbd.h 775KBD_MAXRETRY opt_kbd.h 776KBD_MAXWAIT opt_kbd.h 777KBD_RESETDELAY opt_kbd.h 778KBDIO_DEBUG opt_kbd.h 779 780# options for the Atheros driver 781ATH_DEBUG opt_ath.h 782ATH_TXBUF opt_ath.h 783ATH_RXBUF opt_ath.h 784ATH_DIAGAPI opt_ath.h 785ATH_TX99_DIAG opt_ath.h 786ATH_ENABLE_11N opt_ath.h 787ATH_ENABLE_DFS opt_ath.h 788ATH_EEPROM_FIRMWARE opt_ath.h 789ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 790ATH_DEBUG_ALQ opt_ath.h 791ATH_KTR_INTR_DEBUG opt_ath.h 792 793# options for the Atheros hal 794AH_SUPPORT_AR5416 opt_ah.h 795# XXX For now, this breaks non-AR9130 chipsets, so only use it 796# XXX when actually targetting AR9130. 797AH_SUPPORT_AR9130 opt_ah.h 798 799# This is required for AR933x SoC support 800AH_SUPPORT_AR9330 opt_ah.h 801AH_SUPPORT_AR9340 opt_ah.h 802 803AH_DEBUG opt_ah.h 804AH_ASSERT opt_ah.h 805AH_DEBUG_ALQ opt_ah.h 806AH_REGOPS_FUNC opt_ah.h 807AH_WRITE_REGDOMAIN opt_ah.h 808AH_DEBUG_COUNTRY opt_ah.h 809AH_WRITE_EEPROM opt_ah.h 810AH_PRIVATE_DIAG opt_ah.h 811AH_NEED_DESC_SWAP opt_ah.h 812AH_USE_INIPDGAIN opt_ah.h 813AH_MAXCHAN opt_ah.h 814AH_RXCFG_SDMAMW_4BYTES opt_ah.h 815AH_INTERRUPT_DEBUGGING opt_ah.h 816# AR5416 and later interrupt mitigation 817# XXX do not use this for AR9130 818AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 819 820# options for the Broadcom BCM43xx driver (bwi) 821BWI_DEBUG opt_bwi.h 822BWI_DEBUG_VERBOSE opt_bwi.h 823 824# options for the Marvell 8335 wireless driver 825MALO_DEBUG opt_malo.h 826MALO_TXBUF opt_malo.h 827MALO_RXBUF opt_malo.h 828 829# options for the Marvell wireless driver 830MWL_DEBUG opt_mwl.h 831MWL_TXBUF opt_mwl.h 832MWL_RXBUF opt_mwl.h 833MWL_DIAGAPI opt_mwl.h 834MWL_AGGR_SIZE opt_mwl.h 835MWL_TX_NODROP opt_mwl.h 836 837# Options for the Intel 802.11n wireless driver 838IWN_DEBUG opt_iwn.h 839 840# dcons options 841DCONS_BUF_SIZE opt_dcons.h 842DCONS_POLL_HZ opt_dcons.h 843DCONS_FORCE_CONSOLE opt_dcons.h 844DCONS_FORCE_GDB opt_dcons.h 845 846# HWPMC options 847HWPMC_HOOKS 848HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h 849 850# XBOX options for FreeBSD/i386, but some files are MI 851XBOX opt_xbox.h 852 853# Interrupt filtering 854INTR_FILTER 855 856# 802.11 support layer 857IEEE80211_DEBUG opt_wlan.h 858IEEE80211_DEBUG_REFCNT opt_wlan.h 859IEEE80211_AMPDU_AGE opt_wlan.h 860IEEE80211_SUPPORT_MESH opt_wlan.h 861IEEE80211_SUPPORT_SUPERG opt_wlan.h 862IEEE80211_SUPPORT_TDMA opt_wlan.h 863IEEE80211_ALQ opt_wlan.h 864IEEE80211_DFS_DEBUG opt_wlan.h 865 866# 802.11 TDMA support 867TDMA_SLOTLEN_DEFAULT opt_tdma.h 868TDMA_SLOTCNT_DEFAULT opt_tdma.h 869TDMA_BINTVAL_DEFAULT opt_tdma.h 870TDMA_TXRATE_11B_DEFAULT opt_tdma.h 871TDMA_TXRATE_11G_DEFAULT opt_tdma.h 872TDMA_TXRATE_11A_DEFAULT opt_tdma.h 873TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 874TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 875TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 876TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 877TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 878 879# Network stack virtualization options 880VIMAGE opt_global.h 881VNET_DEBUG opt_global.h 882 883# Common Flash Interface (CFI) options 884CFI_SUPPORT_STRATAFLASH opt_cfi.h 885CFI_ARMEDANDDANGEROUS opt_cfi.h 886 887# Sound options 888SND_DEBUG opt_snd.h 889SND_DIAGNOSTIC opt_snd.h 890SND_FEEDER_MULTIFORMAT opt_snd.h 891SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 892SND_FEEDER_RATE_HP opt_snd.h 893SND_PCM_64 opt_snd.h 894SND_OLDSTEREO opt_snd.h 895 896X86BIOS 897 898# Flattened device tree options 899FDT opt_platform.h 900FDT_DTB_STATIC opt_platform.h 901 902# OFED Infiniband stack 903OFED opt_ofed.h 904OFED_DEBUG_INIT opt_ofed.h 905SDP opt_ofed.h 906SDP_DEBUG opt_ofed.h 907IPOIB opt_ofed.h 908IPOIB_DEBUG opt_ofed.h 909IPOIB_CM opt_ofed.h 910 911# Resource Accounting 912RACCT opt_global.h 913 914# Resource Limits 915RCTL opt_global.h 916 917# Random number generator(s) 918RANDOM_YARROW opt_random.h 919RANDOM_FORTUNA opt_random.h 920RANDOM_DEBUG opt_random.h 921RANDOM_RWFILE opt_random.h 922