1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affects only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AHC_ALLOW_MEMIO opt_aic7xxx.h 35AHC_TMODE_ENABLE opt_aic7xxx.h 36AHC_DUMP_EEPROM opt_aic7xxx.h 37AHC_DEBUG opt_aic7xxx.h 38AHC_DEBUG_OPTS opt_aic7xxx.h 39AHC_REG_PRETTY_PRINT opt_aic7xxx.h 40AHD_DEBUG opt_aic79xx.h 41AHD_DEBUG_OPTS opt_aic79xx.h 42AHD_TMODE_ENABLE opt_aic79xx.h 43AHD_REG_PRETTY_PRINT opt_aic79xx.h 44ADW_ALLOW_MEMIO opt_adw.h 45 46TWA_DEBUG opt_twa.h 47TWA_FLASH_FIRMWARE opt_twa.h 48 49# Debugging options. 50DDB 51DDB_BUFR_SIZE opt_ddb.h 52DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 53DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 54DDB_CTF opt_ddb.h 55DDB_NUMSYM opt_ddb.h 56GDB 57KDB opt_global.h 58KDB_TRACE opt_kdb.h 59KDB_UNATTENDED opt_kdb.h 60SYSCTL_DEBUG opt_sysctl.h 61 62NO_SYSCTL_DESCR opt_global.h 63 64# Miscellaneous options. 65ADAPTIVE_SX 66ALQ 67AUDIT opt_global.h 68CODA_COMPAT_5 opt_coda.h 69COMPAT_43 opt_compat.h 70COMPAT_43TTY opt_compat.h 71COMPAT_FREEBSD4 opt_compat.h 72COMPAT_FREEBSD5 opt_compat.h 73COMPAT_FREEBSD6 opt_compat.h 74COMPAT_FREEBSD7 opt_compat.h 75COMPILING_LINT opt_global.h 76CY_PCI_FASTINTR 77DIRECTIO 78FULL_PREEMPTION opt_sched.h 79IPI_PREEMPTION opt_sched.h 80GEOM_AES opt_geom.h 81GEOM_BDE opt_geom.h 82GEOM_BSD opt_geom.h 83GEOM_CACHE opt_geom.h 84GEOM_CONCAT opt_geom.h 85GEOM_ELI opt_geom.h 86GEOM_FOX opt_geom.h 87GEOM_GATE opt_geom.h 88GEOM_JOURNAL opt_geom.h 89GEOM_LABEL opt_geom.h 90GEOM_LINUX_LVM opt_geom.h 91GEOM_MBR opt_geom.h 92GEOM_MIRROR opt_geom.h 93GEOM_MULTIPATH opt_geom.h 94GEOM_NOP opt_geom.h 95GEOM_PART_APM opt_geom.h 96GEOM_PART_BSD opt_geom.h 97GEOM_PART_GPT opt_geom.h 98GEOM_PART_MBR opt_geom.h 99GEOM_PART_PC98 opt_geom.h 100GEOM_PART_VTOC8 opt_geom.h 101GEOM_PC98 opt_geom.h 102GEOM_RAID3 opt_geom.h 103GEOM_SHSEC opt_geom.h 104GEOM_STRIPE opt_geom.h 105GEOM_SUNLABEL opt_geom.h 106GEOM_UZIP opt_geom.h 107GEOM_VIRSTOR opt_geom.h 108GEOM_VOL opt_geom.h 109GEOM_ZERO opt_geom.h 110KDTRACE_HOOKS opt_kdtrace.h 111KSTACK_MAX_PAGES 112KSTACK_PAGES 113KTRACE 114KTRACE_REQUEST_POOL opt_ktrace.h 115LIBICONV 116MAC 117MAC_ALWAYS_LABEL_MBUF opt_mac.h 118MAC_BIBA opt_dontuse.h 119MAC_BSDEXTENDED opt_dontuse.h 120MAC_IFOFF opt_dontuse.h 121MAC_LOMAC opt_dontuse.h 122MAC_MLS opt_dontuse.h 123MAC_NONE opt_dontuse.h 124MAC_PARTITION opt_dontuse.h 125MAC_PORTACL opt_dontuse.h 126MAC_SEEOTHERUIDS opt_dontuse.h 127MAC_STATIC opt_mac.h 128MAC_STUB opt_dontuse.h 129MAC_TEST opt_dontuse.h 130MD_ROOT opt_md.h 131MD_ROOT_SIZE opt_md.h 132MFI_DEBUG opt_mfi.h 133MFI_DECODE_LOG opt_mfi.h 134MPROF_BUFFERS opt_mprof.h 135MPROF_HASH_SIZE opt_mprof.h 136NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 137NO_ADAPTIVE_RWLOCKS 138NSWBUF_MIN opt_swap.h 139MBUF_PACKET_ZONE_DISABLE opt_global.h 140PANIC_REBOOT_WAIT_TIME opt_panic.h 141PPC_DEBUG opt_ppc.h 142PPC_PROBE_CHIPSET opt_ppc.h 143PPS_SYNC opt_ntp.h 144PREEMPTION opt_sched.h 145QUOTA 146SCHED_4BSD opt_sched.h 147SCHED_STATS opt_sched.h 148SCHED_ULE opt_sched.h 149SHOW_BUSYBUFS 150SLEEPQUEUE_PROFILING 151SLHCI_DEBUG opt_slhci.h 152SPX_HACK 153STACK opt_stack.h 154SUIDDIR 155MSGMNB opt_sysvipc.h 156MSGMNI opt_sysvipc.h 157MSGSEG opt_sysvipc.h 158MSGSSZ opt_sysvipc.h 159MSGTQL opt_sysvipc.h 160SEMMAP opt_sysvipc.h 161SEMMNI opt_sysvipc.h 162SEMMNS opt_sysvipc.h 163SEMMNU opt_sysvipc.h 164SEMMSL opt_sysvipc.h 165SEMOPM opt_sysvipc.h 166SEMUME opt_sysvipc.h 167SHMALL opt_sysvipc.h 168SHMMAX opt_sysvipc.h 169SHMMAXPGS opt_sysvipc.h 170SHMMIN opt_sysvipc.h 171SHMMNI opt_sysvipc.h 172SHMSEG opt_sysvipc.h 173SYSVMSG opt_sysvipc.h 174SYSVSEM opt_sysvipc.h 175SYSVSHM opt_sysvipc.h 176SW_WATCHDOG opt_watchdog.h 177TURNSTILE_PROFILING 178VFS_AIO 179VERBOSE_SYSINIT opt_global.h 180WLCACHE opt_wavelan.h 181WLDEBUG opt_wavelan.h 182 183# POSIX kernel options 184P1003_1B_MQUEUE opt_posix.h 185P1003_1B_SEMAPHORES opt_posix.h 186_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 187 188# Do we want the config file compiled into the kernel? 189INCLUDE_CONFIG_FILE opt_config.h 190 191# Options for static filesystems. These should only be used at config 192# time, since the corresponding lkms cannot work if there are any static 193# dependencies. Unusability is enforced by hiding the defines for the 194# options in a never-included header. 195CD9660 opt_dontuse.h 196CODA opt_dontuse.h 197EXT2FS opt_dontuse.h 198FDESCFS opt_dontuse.h 199HPFS opt_dontuse.h 200MSDOSFS opt_dontuse.h 201NTFS opt_dontuse.h 202NULLFS opt_dontuse.h 203NWFS opt_dontuse.h 204PORTALFS opt_dontuse.h 205PROCFS opt_dontuse.h 206PSEUDOFS opt_dontuse.h 207REISERFS opt_dontuse.h 208SMBFS opt_dontuse.h 209TMPFS opt_dontuse.h 210UDF opt_dontuse.h 211UNIONFS opt_dontuse.h 212 213# Pseudofs debugging 214PSEUDOFS_TRACE opt_pseudofs.h 215 216# Broken - ffs_snapshot() dependency from ufs_lookup() :-( 217FFS opt_ffs_broken_fixme.h 218 219# These static filesystems have one slightly bogus static dependency in 220# sys/i386/i386/autoconf.c. If any of these filesystems are 221# statically compiled into the kernel, code for mounting them as root 222# filesystems will be enabled - but look below. 223NFSCLIENT opt_nfs.h 224NFSSERVER opt_nfs.h 225NFS4CLIENT opt_nfs.h 226 227# filesystems and libiconv bridge 228CD9660_ICONV opt_dontuse.h 229MSDOSFS_ICONV opt_dontuse.h 230NTFS_ICONV opt_dontuse.h 231UDF_ICONV opt_dontuse.h 232 233# If you are following the conditions in the copyright, 234# you can enable soft-updates which will speed up a lot of thigs 235# and make the system safer from crashes at the same time. 236# otherwise a STUB module will be compiled in. 237SOFTUPDATES opt_ffs.h 238 239# On small, embedded systems, it can be useful to turn off support for 240# snapshots. It saves about 30-40k for a feature that would be lightly 241# used, if it is used at all. 242NO_FFS_SNAPSHOT opt_ffs.h 243 244# Enabling this option turns on support for Access Control Lists in UFS, 245# which can be used to support high security configurations. Depends on 246# UFS_EXTATTR. 247UFS_ACL opt_ufs.h 248 249# Enabling this option turns on support for extended attributes in UFS-based 250# filesystems, which can be used to support high security configurations 251# as well as new filesystem features. 252UFS_EXTATTR opt_ufs.h 253UFS_EXTATTR_AUTOSTART opt_ufs.h 254 255# Enable fast hash lookups for large directories on UFS-based filesystems. 256UFS_DIRHASH opt_ufs.h 257 258# Enable gjournal-based UFS journal. 259UFS_GJOURNAL opt_ufs.h 260 261# The below sentence is not in English, and neither is this one. 262# We plan to remove the static dependences above, with a 263# <filesystem>_ROOT option to control if it usable as root. This list 264# allows these options to be present in config files already (though 265# they won't make any difference yet). 266NFS_ROOT opt_nfsroot.h 267 268# SMB/CIFS requester 269NETSMB opt_netsmb.h 270 271# Options used only in subr_param.c. 272HZ opt_param.h 273MAXFILES opt_param.h 274NBUF opt_param.h 275NSFBUFS opt_param.h 276VM_BCACHE_SIZE_MAX opt_param.h 277VM_SWZONE_SIZE_MAX opt_param.h 278MAXUSERS 279DFLDSIZ opt_param.h 280MAXDSIZ opt_param.h 281MAXSSIZ opt_param.h 282 283# Generic SCSI options. 284CAM_MAX_HIGHPOWER opt_cam.h 285CAMDEBUG opt_cam.h 286CAM_DEBUG_DELAY opt_cam.h 287CAM_DEBUG_BUS opt_cam.h 288CAM_DEBUG_TARGET opt_cam.h 289CAM_DEBUG_LUN opt_cam.h 290CAM_DEBUG_FLAGS opt_cam.h 291SCSI_DELAY opt_scsi.h 292SCSI_NO_SENSE_STRINGS opt_scsi.h 293SCSI_NO_OP_STRINGS opt_scsi.h 294 295# Options used only in cam/scsi/scsi_cd.c 296CHANGER_MIN_BUSY_SECONDS opt_cd.h 297CHANGER_MAX_BUSY_SECONDS opt_cd.h 298 299# Options used only in cam/scsi/scsi_sa.c. 300SA_IO_TIMEOUT opt_sa.h 301SA_SPACE_TIMEOUT opt_sa.h 302SA_REWIND_TIMEOUT opt_sa.h 303SA_ERASE_TIMEOUT opt_sa.h 304SA_1FM_AT_EOD opt_sa.h 305 306# Options used only in cam/scsi/scsi_pt.c 307SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 308 309# Options used only in cam/scsi/scsi_ses.c 310SES_ENABLE_PASSTHROUGH opt_ses.h 311 312# Options used in dev/sym/ (Symbios SCSI driver). 313SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 314 # Allows the ncr to take precedence 315 # 1 (1<<0) -> 810a, 860 316 # 2 (1<<1) -> 825a, 875, 885, 895 317 # 4 (1<<2) -> 895a, 896, 1510d 318SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 319 # disabled:0 (default), enabled:1 320SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 321 # disabled:0, enabled:1 (default) 322SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 323 # default:8, range:[1..64] 324 325# Options used only in pci/ncr.c 326SCSI_NCR_DEBUG opt_ncr.h 327SCSI_NCR_MAX_SYNC opt_ncr.h 328SCSI_NCR_MAX_WIDE opt_ncr.h 329SCSI_NCR_MYADDR opt_ncr.h 330 331# Options used only in dev/isp/* 332ISP_TARGET_MODE opt_isp.h 333ISP_FW_CRASH_DUMP opt_isp.h 334ISP_DEFAULT_ROLES opt_isp.h 335 336# Options used only in dev/iscsi 337ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 338 339# Options used in the 'ata' ATA/ATAPI driver 340ATA_STATIC_ID opt_ata.h 341ATA_NOPCI opt_ata.h 342 343# Net stuff. 344ACCEPT_FILTER_DATA 345ACCEPT_FILTER_DNS 346ACCEPT_FILTER_HTTP 347ALTQ opt_global.h 348ALTQ_CBQ opt_altq.h 349ALTQ_RED opt_altq.h 350ALTQ_RIO opt_altq.h 351ALTQ_HFSC opt_altq.h 352ALTQ_CDNR opt_altq.h 353ALTQ_PRIQ opt_altq.h 354ALTQ_NOPCC opt_altq.h 355ALTQ_DEBUG opt_altq.h 356BOOTP opt_bootp.h 357BOOTP_BLOCKSIZE opt_bootp.h 358BOOTP_COMPAT opt_bootp.h 359BOOTP_NFSROOT opt_bootp.h 360BOOTP_NFSV3 opt_bootp.h 361BOOTP_WIRED_TO opt_bootp.h 362DEVICE_POLLING 363DEV_ENC opt_enc.h 364DEV_PF opt_pf.h 365DEV_PFLOG opt_pf.h 366DEV_PFSYNC opt_pf.h 367ETHER_II opt_ef.h 368ETHER_8023 opt_ef.h 369ETHER_8022 opt_ef.h 370ETHER_SNAP opt_ef.h 371ROUTETABLES opt_route.h 372MROUTING opt_mrouting.h 373INET opt_inet.h 374INET6 opt_inet6.h 375IPSEC opt_ipsec.h 376IPSEC_DEBUG opt_ipsec.h 377IPSEC_FILTERTUNNEL opt_ipsec.h 378IPDIVERT 379DUMMYNET opt_ipdn.h 380IPFILTER opt_ipfilter.h 381IPFILTER_LOG opt_ipfilter.h 382IPFILTER_LOOKUP opt_ipfilter.h 383IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 384IPFIREWALL opt_ipfw.h 385IPFIREWALL_VERBOSE opt_ipfw.h 386IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 387IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 388IPFIREWALL_FORWARD opt_ipfw.h 389IPFIREWALL_NAT opt_ipfw.h 390IPSTEALTH 391IPX 392LIBMBPOOL 393LIBMCHAIN 394LIBALIAS 395MBUF_STRESS_TEST 396MBUF_PROFILING 397NCP 398NETATALK opt_atalk.h 399PPP_BSDCOMP opt_ppp.h 400PPP_DEFLATE opt_ppp.h 401PPP_FILTER opt_ppp.h 402RADIX_MPATH opt_mpath.h 403SLIP_IFF_OPTS opt_slip.h 404TCPDEBUG 405TCP_SIGNATURE opt_inet.h 406DEV_VLAN opt_vlan.h 407VLAN_ARRAY opt_vlan.h 408XBONEHACK 409KRPC 410NFSLOCKD 411 412# 413# SCTP 414# 415SCTP opt_sctp.h 416SCTP_DEBUG opt_sctp.h # Enable debug printfs 417SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril 418SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 419SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 420SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 421SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 422SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 423SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 424# 425# 426# 427 428# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 429# Each netgraph node type can be either be compiled into the kernel 430# or loaded dynamically. To get the former, include the corresponding 431# option below. Each type has its own man page, e.g. ng_async(4). 432NETGRAPH 433NETGRAPH_DEBUG opt_netgraph.h 434NETGRAPH_ASYNC opt_netgraph.h 435NETGRAPH_ATMLLC opt_netgraph.h 436NETGRAPH_ATM_ATMPIF opt_netgraph.h 437NETGRAPH_BLUETOOTH opt_netgraph.h 438NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 439NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 440NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 441NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 442NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 443NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 444NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 445NETGRAPH_BPF opt_netgraph.h 446NETGRAPH_BRIDGE opt_netgraph.h 447NETGRAPH_CAR opt_netgraph.h 448NETGRAPH_CISCO opt_netgraph.h 449NETGRAPH_DEFLATE opt_netgraph.h 450NETGRAPH_DEVICE opt_netgraph.h 451NETGRAPH_ECHO opt_netgraph.h 452NETGRAPH_EIFACE opt_netgraph.h 453NETGRAPH_ETHER opt_netgraph.h 454NETGRAPH_FEC opt_netgraph.h 455NETGRAPH_FRAME_RELAY opt_netgraph.h 456NETGRAPH_GIF opt_netgraph.h 457NETGRAPH_GIF_DEMUX opt_netgraph.h 458NETGRAPH_HOLE opt_netgraph.h 459NETGRAPH_IFACE opt_netgraph.h 460NETGRAPH_IP_INPUT opt_netgraph.h 461NETGRAPH_IPFW opt_netgraph.h 462NETGRAPH_KSOCKET opt_netgraph.h 463NETGRAPH_L2TP opt_netgraph.h 464NETGRAPH_LMI opt_netgraph.h 465# MPPC compression requires proprietary files (not included) 466NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 467NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 468NETGRAPH_NAT opt_netgraph.h 469NETGRAPH_NETFLOW opt_netgraph.h 470NETGRAPH_ONE2MANY opt_netgraph.h 471NETGRAPH_PPP opt_netgraph.h 472NETGRAPH_PPPOE opt_netgraph.h 473NETGRAPH_PPTPGRE opt_netgraph.h 474NETGRAPH_PRED1 opt_netgraph.h 475NETGRAPH_RFC1490 opt_netgraph.h 476NETGRAPH_SOCKET opt_netgraph.h 477NETGRAPH_SPLIT opt_netgraph.h 478NETGRAPH_SPPP opt_netgraph.h 479NETGRAPH_TAG opt_netgraph.h 480NETGRAPH_TCPMSS opt_netgraph.h 481NETGRAPH_TEE opt_netgraph.h 482NETGRAPH_TTY opt_netgraph.h 483NETGRAPH_UI opt_netgraph.h 484NETGRAPH_VJC opt_netgraph.h 485 486# NgATM options 487NGATM_ATM opt_netgraph.h 488NGATM_ATMBASE opt_netgraph.h 489NGATM_SSCOP opt_netgraph.h 490NGATM_SSCFU opt_netgraph.h 491NGATM_UNI opt_netgraph.h 492NGATM_CCATM opt_netgraph.h 493 494# DRM options 495DRM_DEBUG opt_drm.h 496 497ZERO_COPY_SOCKETS opt_zero.h 498TI_PRIVATE_JUMBOS opt_ti.h 499TI_JUMBO_HDRSPLIT opt_ti.h 500 501# XXX Conflict: # of devices vs network protocol (Native ATM). 502# This makes "atm.h" unusable. 503NATM 504 505# DPT driver debug flags 506DPT_MEASURE_PERFORMANCE opt_dpt.h 507DPT_HANDLE_TIMEOUTS opt_dpt.h 508DPT_TIMEOUT_FACTOR opt_dpt.h 509DPT_LOST_IRQ opt_dpt.h 510DPT_RESET_HBA opt_dpt.h 511 512# Misc debug flags. Most of these should probably be replaced with 513# 'DEBUG', and then let people recompile just the interesting modules 514# with 'make CC="cc -DDEBUG"'. 515CLUSTERDEBUG opt_debug_cluster.h 516DEBUG_1284 opt_ppb_1284.h 517VP0_DEBUG opt_vpo.h 518LPT_DEBUG opt_lpt.h 519PLIP_DEBUG opt_plip.h 520LOCKF_DEBUG opt_debug_lockf.h 521NETATALKDEBUG opt_atalk.h 522SI_DEBUG opt_debug_si.h 523 524# Fb options 525FB_DEBUG opt_fb.h 526FB_INSTALL_CDEV opt_fb.h 527 528# ppbus related options 529PERIPH_1284 opt_ppb_1284.h 530DONTPROBE_1284 opt_ppb_1284.h 531 532# smbus related options 533ENABLE_ALART opt_intpm.h 534 535# These cause changes all over the kernel 536BLKDEV_IOSIZE opt_global.h 537MAXPHYS opt_global.h 538DFLTPHYS opt_global.h 539BURN_BRIDGES opt_global.h 540DEBUG opt_global.h 541DEBUG_LOCKS opt_global.h 542DEBUG_VFS_LOCKS opt_global.h 543DIAGNOSTIC opt_global.h 544INVARIANT_SUPPORT opt_global.h 545INVARIANTS opt_global.h 546MCLSHIFT opt_global.h 547MUTEX_DEBUG opt_global.h 548MUTEX_NOINLINE opt_global.h 549LOCK_PROFILING opt_global.h 550LOCK_PROFILING_FAST opt_global.h 551MSIZE opt_global.h 552REGRESSION opt_global.h 553RESTARTABLE_PANICS opt_global.h 554RWLOCK_NOINLINE opt_global.h 555SX_NOINLINE opt_global.h 556VFS_BIO_DEBUG opt_global.h 557 558# These are VM related options 559VM_KMEM_SIZE opt_vm.h 560VM_KMEM_SIZE_SCALE opt_vm.h 561VM_KMEM_SIZE_MAX opt_vm.h 562VM_NRESERVLEVEL opt_vm.h 563VM_LEVEL_0_ORDER opt_vm.h 564NO_SWAPPING opt_vm.h 565MALLOC_MAKE_FAILURES opt_vm.h 566MALLOC_PROFILE opt_vm.h 567 568# The MemGuard replacement allocator used for tamper-after-free detection 569DEBUG_MEMGUARD opt_vm.h 570 571# The RedZone malloc(9) protection 572DEBUG_REDZONE opt_vm.h 573 574# Standard SMP options 575SMP opt_global.h 576 577# Size of the kernel message buffer 578MSGBUF_SIZE opt_msgbuf.h 579 580# NFS options 581NFS_MINATTRTIMO opt_nfs.h 582NFS_MAXATTRTIMO opt_nfs.h 583NFS_MINDIRATTRTIMO opt_nfs.h 584NFS_MAXDIRATTRTIMO opt_nfs.h 585NFS_GATHERDELAY opt_nfs.h 586NFS_WDELAYHASHSIZ opt_nfs.h 587NFS_DEBUG opt_nfs.h 588 589# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 590OVERRIDE_CARD opt_bktr.h 591OVERRIDE_TUNER opt_bktr.h 592OVERRIDE_DBX opt_bktr.h 593OVERRIDE_MSP opt_bktr.h 594BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 595BROOKTREE_ALLOC_PAGES opt_bktr.h 596BKTR_OVERRIDE_CARD opt_bktr.h 597BKTR_OVERRIDE_TUNER opt_bktr.h 598BKTR_OVERRIDE_DBX opt_bktr.h 599BKTR_OVERRIDE_MSP opt_bktr.h 600BKTR_SYSTEM_DEFAULT opt_bktr.h 601BKTR_ALLOC_PAGES opt_bktr.h 602BKTR_USE_PLL opt_bktr.h 603BKTR_GPIO_ACCESS opt_bktr.h 604BKTR_NO_MSP_RESET opt_bktr.h 605BKTR_430_FX_MODE opt_bktr.h 606BKTR_SIS_VIA_MODE opt_bktr.h 607BKTR_USE_FREEBSD_SMBUS opt_bktr.h 608BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 609 610BREAK_TO_DEBUGGER opt_comconsole.h 611ALT_BREAK_TO_DEBUGGER opt_comconsole.h 612 613# Options to support PPS 614UART_PPS_ON_CTS opt_uart.h 615 616# options for bus/device framework 617BUS_DEBUG opt_bus.h 618 619# options for USB support 620USB_DEBUG opt_usb.h 621USBVERBOSE opt_usb.h 622UKBD_DFLT_KEYMAP opt_ukbd.h 623UPLCOM_INTR_INTERVAL opt_uplcom.h 624UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 625UVSCOM_INTR_INTERVAL opt_uvscom.h 626 627# Embedded system options 628INIT_PATH 629 630ROOTDEVNAME 631 632FDC_DEBUG opt_fdc.h 633PCFCLOCK_VERBOSE opt_pcfclock.h 634PCFCLOCK_MAX_RETRIES opt_pcfclock.h 635 636KTR opt_global.h 637KTR_ALQ opt_ktr.h 638KTR_MASK opt_ktr.h 639KTR_CPUMASK opt_ktr.h 640KTR_COMPILE opt_global.h 641KTR_ENTRIES opt_global.h 642KTR_VERBOSE opt_ktr.h 643WITNESS opt_global.h 644WITNESS_KDB opt_witness.h 645WITNESS_SKIPSPIN opt_witness.h 646 647# options for ACPI support 648ACPI_DEBUG opt_acpi.h 649ACPI_MAX_THREADS opt_acpi.h 650ACPI_NO_SEMAPHORES opt_acpi.h 651 652# ISA support 653DEV_ISA opt_isa.h 654ISAPNP opt_isa.h 655 656# various 'device presence' options. 657DEV_BPF opt_bpf.h 658DEV_MCA opt_mca.h 659DEV_CARP opt_carp.h 660DEV_PTY opt_tty.h 661DEV_SPLASH opt_splash.h 662 663# EISA support 664DEV_EISA opt_eisa.h 665EISA_SLOTS opt_eisa.h 666 667# ed driver 668ED_HPP opt_ed.h 669ED_3C503 opt_ed.h 670ED_SIC opt_ed.h 671 672# bce driver 673BCE_DEBUG opt_bce.h 674 675# wi driver 676WI_SYMBOL_FIRMWARE opt_wi.h 677 678SOCKBUF_DEBUG opt_global.h 679 680# options for ubsec driver 681UBSEC_DEBUG opt_ubsec.h 682UBSEC_RNDTEST opt_ubsec.h 683UBSEC_NO_RNG opt_ubsec.h 684 685# options for hifn driver 686HIFN_DEBUG opt_hifn.h 687HIFN_RNDTEST opt_hifn.h 688 689# options for safenet driver 690SAFE_DEBUG opt_safe.h 691SAFE_NO_RNG opt_safe.h 692SAFE_RNDTEST opt_safe.h 693 694# syscons options 695MAXCONS opt_syscons.h 696SC_ALT_MOUSE_IMAGE opt_syscons.h 697SC_CUT_SPACES2TABS opt_syscons.h 698SC_CUT_SEPCHARS opt_syscons.h 699SC_DEBUG_LEVEL opt_syscons.h 700SC_DFLT_FONT opt_syscons.h 701SC_DISABLE_KDBKEY opt_syscons.h 702SC_DISABLE_REBOOT opt_syscons.h 703SC_HISTORY_SIZE opt_syscons.h 704SC_KERNEL_CONS_ATTR opt_syscons.h 705SC_KERNEL_CONS_REV_ATTR opt_syscons.h 706SC_MOUSE_CHAR opt_syscons.h 707SC_NO_CUTPASTE opt_syscons.h 708SC_NO_FONT_LOADING opt_syscons.h 709SC_NO_HISTORY opt_syscons.h 710SC_NO_MODE_CHANGE opt_syscons.h 711SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 712SC_NO_SYSMOUSE opt_syscons.h 713SC_NORM_ATTR opt_syscons.h 714SC_NORM_REV_ATTR opt_syscons.h 715SC_PIXEL_MODE opt_syscons.h 716SC_RENDER_DEBUG opt_syscons.h 717SC_TWOBUTTON_MOUSE opt_syscons.h 718 719# options for printf 720PRINTF_BUFR_SIZE opt_printf.h 721 722# kbd options 723KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 724KBD_INSTALL_CDEV opt_kbd.h 725KBD_MAXRETRY opt_kbd.h 726KBD_MAXWAIT opt_kbd.h 727KBD_RESETDELAY opt_kbd.h 728KBDIO_DEBUG opt_kbd.h 729 730# options for the Atheros driver 731ATH_DEBUG opt_ath.h 732ATH_TXBUF opt_ath.h 733ATH_RXBUF opt_ath.h 734ATH_DIAGAPI opt_ath.h 735ATH_TX99_DIAG opt_ath.h 736 737# options for the Marvell 8335 wireless driver 738MALO_DEBUG opt_malo.h 739MALO_TXBUF opt_malo.h 740MALO_RXBUF opt_malo.h 741 742# dcons options 743DCONS_BUF_SIZE opt_dcons.h 744DCONS_POLL_HZ opt_dcons.h 745DCONS_FORCE_CONSOLE opt_dcons.h 746DCONS_FORCE_GDB opt_dcons.h 747 748# VFS options 749LOOKUP_SHARED opt_vfs.h 750 751# HWPMC options 752HWPMC_HOOKS 753 754# XBOX options for FreeBSD/i386, but some files are MI 755XBOX opt_xbox.h 756 757# XFS 758XFS 759 760# Interrupt filtering 761INTR_FILTER 762 763# 802.11 support layer 764IEEE80211_DEBUG opt_wlan.h 765IEEE80211_DEBUG_REFCNT opt_wlan.h 766IEEE80211_AMPDU_AGE opt_wlan.h 767 768#Disable code to dispatch tcp offloading 769TCP_OFFLOAD_DISABLE opt_inet.h 770 771# Virtualize the network stack 772VIMAGE 773