1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affects only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AACRAID_DEBUG opt_aacraid.h 35AHC_ALLOW_MEMIO opt_aic7xxx.h 36AHC_TMODE_ENABLE opt_aic7xxx.h 37AHC_DUMP_EEPROM opt_aic7xxx.h 38AHC_DEBUG opt_aic7xxx.h 39AHC_DEBUG_OPTS opt_aic7xxx.h 40AHC_REG_PRETTY_PRINT opt_aic7xxx.h 41AHD_DEBUG opt_aic79xx.h 42AHD_DEBUG_OPTS opt_aic79xx.h 43AHD_TMODE_ENABLE opt_aic79xx.h 44AHD_REG_PRETTY_PRINT opt_aic79xx.h 45ADW_ALLOW_MEMIO opt_adw.h 46 47TWA_DEBUG opt_twa.h 48TWA_FLASH_FIRMWARE opt_twa.h 49 50# Debugging options. 51ALT_BREAK_TO_DEBUGGER opt_kdb.h 52BREAK_TO_DEBUGGER opt_kdb.h 53DDB 54DDB_BUFR_SIZE opt_ddb.h 55DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 56DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 57DDB_CTF opt_ddb.h 58DDB_NUMSYM opt_ddb.h 59GDB 60KDB opt_global.h 61KDB_TRACE opt_kdb.h 62KDB_UNATTENDED opt_kdb.h 63KLD_DEBUG opt_kld.h 64SYSCTL_DEBUG opt_sysctl.h 65EARLY_PRINTF opt_global.h 66TEXTDUMP_PREFERRED opt_ddb.h 67TEXTDUMP_VERBOSE opt_ddb.h 68 69# Miscellaneous options. 70ADAPTIVE_LOCKMGRS 71ALQ 72ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h 73ATSE_CFI_HACK opt_cfi.h 74AUDIT opt_global.h 75BOOTHOWTO opt_global.h 76BOOTVERBOSE opt_global.h 77CALLOUT_PROFILING 78CAPABILITIES opt_capsicum.h 79CAPABILITY_MODE opt_capsicum.h 80COMPAT_43 opt_compat.h 81COMPAT_43TTY opt_compat.h 82COMPAT_FREEBSD4 opt_compat.h 83COMPAT_FREEBSD5 opt_compat.h 84COMPAT_FREEBSD6 opt_compat.h 85COMPAT_FREEBSD7 opt_compat.h 86COMPILING_LINT opt_global.h 87COMPRESS_USER_CORES opt_core.h 88CY_PCI_FASTINTR 89DEADLKRES opt_watchdog.h 90DIRECTIO 91FILEMON opt_dontuse.h 92FFCLOCK 93FULL_PREEMPTION opt_sched.h 94IPI_PREEMPTION opt_sched.h 95GEOM_AES opt_geom.h 96GEOM_BDE opt_geom.h 97GEOM_BSD opt_geom.h 98GEOM_CACHE opt_geom.h 99GEOM_CONCAT opt_geom.h 100GEOM_ELI opt_geom.h 101GEOM_FOX opt_geom.h 102GEOM_GATE opt_geom.h 103GEOM_JOURNAL opt_geom.h 104GEOM_LABEL opt_geom.h 105GEOM_LABEL_GPT opt_geom.h 106GEOM_LINUX_LVM opt_geom.h 107GEOM_MBR opt_geom.h 108GEOM_MIRROR opt_geom.h 109GEOM_MULTIPATH opt_geom.h 110GEOM_NOP opt_geom.h 111GEOM_PART_APM opt_geom.h 112GEOM_PART_BSD opt_geom.h 113GEOM_PART_EBR opt_geom.h 114GEOM_PART_EBR_COMPAT opt_geom.h 115GEOM_PART_GPT opt_geom.h 116GEOM_PART_LDM opt_geom.h 117GEOM_PART_MBR opt_geom.h 118GEOM_PART_PC98 opt_geom.h 119GEOM_PART_VTOC8 opt_geom.h 120GEOM_PC98 opt_geom.h 121GEOM_RAID opt_geom.h 122GEOM_RAID3 opt_geom.h 123GEOM_SHSEC opt_geom.h 124GEOM_STRIPE opt_geom.h 125GEOM_SUNLABEL opt_geom.h 126GEOM_UNCOMPRESS opt_geom.h 127GEOM_UZIP opt_geom.h 128GEOM_VINUM opt_geom.h 129GEOM_VIRSTOR opt_geom.h 130GEOM_VOL opt_geom.h 131GEOM_ZERO opt_geom.h 132KDTRACE_HOOKS opt_global.h 133KDTRACE_FRAME opt_kdtrace.h 134KN_HASHSIZE opt_kqueue.h 135KSTACK_MAX_PAGES 136KSTACK_PAGES 137KTRACE 138KTRACE_REQUEST_POOL opt_ktrace.h 139LIBICONV 140MAC opt_global.h 141MAC_BIBA opt_dontuse.h 142MAC_BSDEXTENDED opt_dontuse.h 143MAC_IFOFF opt_dontuse.h 144MAC_LOMAC opt_dontuse.h 145MAC_MLS opt_dontuse.h 146MAC_NONE opt_dontuse.h 147MAC_PARTITION opt_dontuse.h 148MAC_PORTACL opt_dontuse.h 149MAC_SEEOTHERUIDS opt_dontuse.h 150MAC_STATIC opt_mac.h 151MAC_STUB opt_dontuse.h 152MAC_TEST opt_dontuse.h 153MD_ROOT opt_md.h 154MD_ROOT_FSTYPE opt_md.h 155MD_ROOT_SIZE opt_md.h 156MFI_DEBUG opt_mfi.h 157MFI_DECODE_LOG opt_mfi.h 158MPROF_BUFFERS opt_mprof.h 159MPROF_HASH_SIZE opt_mprof.h 160NEW_PCIB opt_global.h 161NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 162NO_ADAPTIVE_RWLOCKS 163NO_ADAPTIVE_SX 164NO_EVENTTIMERS opt_timer.h 165NO_SYSCTL_DESCR opt_global.h 166NSWBUF_MIN opt_swap.h 167MBUF_PACKET_ZONE_DISABLE opt_global.h 168PANIC_REBOOT_WAIT_TIME opt_panic.h 169PPC_DEBUG opt_ppc.h 170PPC_PROBE_CHIPSET opt_ppc.h 171PPS_SYNC opt_ntp.h 172PREEMPTION opt_sched.h 173QUOTA 174SCHED_4BSD opt_sched.h 175SCHED_STATS opt_sched.h 176SCHED_ULE opt_sched.h 177SLEEPQUEUE_PROFILING 178SLHCI_DEBUG opt_slhci.h 179SPX_HACK 180STACK opt_stack.h 181SUIDDIR 182MSGMNB opt_sysvipc.h 183MSGMNI opt_sysvipc.h 184MSGSEG opt_sysvipc.h 185MSGSSZ opt_sysvipc.h 186MSGTQL opt_sysvipc.h 187SEMMNI opt_sysvipc.h 188SEMMNS opt_sysvipc.h 189SEMMNU opt_sysvipc.h 190SEMMSL opt_sysvipc.h 191SEMOPM opt_sysvipc.h 192SEMUME opt_sysvipc.h 193SHMALL opt_sysvipc.h 194SHMMAX opt_sysvipc.h 195SHMMAXPGS opt_sysvipc.h 196SHMMIN opt_sysvipc.h 197SHMMNI opt_sysvipc.h 198SHMSEG opt_sysvipc.h 199SYSVMSG opt_sysvipc.h 200SYSVSEM opt_sysvipc.h 201SYSVSHM opt_sysvipc.h 202SW_WATCHDOG opt_watchdog.h 203TURNSTILE_PROFILING 204UMTX_PROFILING 205VFS_AIO 206VERBOSE_SYSINIT opt_global.h 207WLCACHE opt_wavelan.h 208WLDEBUG opt_wavelan.h 209 210# POSIX kernel options 211P1003_1B_MQUEUE opt_posix.h 212P1003_1B_SEMAPHORES opt_posix.h 213_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 214 215# Do we want the config file compiled into the kernel? 216INCLUDE_CONFIG_FILE opt_config.h 217 218# Options for static filesystems. These should only be used at config 219# time, since the corresponding lkms cannot work if there are any static 220# dependencies. Unusability is enforced by hiding the defines for the 221# options in a never-included header. 222CD9660 opt_dontuse.h 223EXT2FS opt_dontuse.h 224FDESCFS opt_dontuse.h 225FFS opt_dontuse.h 226FUSE opt_dontuse.h 227MSDOSFS opt_dontuse.h 228NANDFS opt_dontuse.h 229NULLFS opt_dontuse.h 230PROCFS opt_dontuse.h 231PSEUDOFS opt_dontuse.h 232REISERFS opt_dontuse.h 233SMBFS opt_dontuse.h 234TMPFS opt_dontuse.h 235UDF opt_dontuse.h 236UNIONFS opt_dontuse.h 237ZFS opt_dontuse.h 238 239# Pseudofs debugging 240PSEUDOFS_TRACE opt_pseudofs.h 241 242# In-kernel GSS-API 243KGSSAPI opt_kgssapi.h 244KGSSAPI_DEBUG opt_kgssapi.h 245 246# These static filesystems have one slightly bogus static dependency in 247# sys/i386/i386/autoconf.c. If any of these filesystems are 248# statically compiled into the kernel, code for mounting them as root 249# filesystems will be enabled - but look below. 250NFSCLIENT opt_nfs.h 251NFSSERVER opt_nfs.h 252 253# Use these options to compile the experimental nfs client and/or 254# server that supports NFSv4 into a kernel. 255# NFSCL - client 256# NFSD - server 257NFSCL opt_nfs.h 258NFSD opt_nfs.h 259 260# filesystems and libiconv bridge 261CD9660_ICONV opt_dontuse.h 262MSDOSFS_ICONV opt_dontuse.h 263UDF_ICONV opt_dontuse.h 264 265# If you are following the conditions in the copyright, 266# you can enable soft-updates which will speed up a lot of thigs 267# and make the system safer from crashes at the same time. 268# otherwise a STUB module will be compiled in. 269SOFTUPDATES opt_ffs.h 270 271# On small, embedded systems, it can be useful to turn off support for 272# snapshots. It saves about 30-40k for a feature that would be lightly 273# used, if it is used at all. 274NO_FFS_SNAPSHOT opt_ffs.h 275 276# Enabling this option turns on support for Access Control Lists in UFS, 277# which can be used to support high security configurations. Depends on 278# UFS_EXTATTR. 279UFS_ACL opt_ufs.h 280 281# Enabling this option turns on support for extended attributes in UFS-based 282# filesystems, which can be used to support high security configurations 283# as well as new filesystem features. 284UFS_EXTATTR opt_ufs.h 285UFS_EXTATTR_AUTOSTART opt_ufs.h 286 287# Enable fast hash lookups for large directories on UFS-based filesystems. 288UFS_DIRHASH opt_ufs.h 289 290# Enable gjournal-based UFS journal. 291UFS_GJOURNAL opt_ufs.h 292 293# The below sentence is not in English, and neither is this one. 294# We plan to remove the static dependences above, with a 295# <filesystem>_ROOT option to control if it usable as root. This list 296# allows these options to be present in config files already (though 297# they won't make any difference yet). 298NFS_ROOT opt_nfsroot.h 299 300# SMB/CIFS requester 301NETSMB opt_netsmb.h 302 303# Options used only in subr_param.c. 304HZ opt_param.h 305MAXFILES opt_param.h 306NBUF opt_param.h 307NSFBUFS opt_param.h 308VM_BCACHE_SIZE_MAX opt_param.h 309VM_SWZONE_SIZE_MAX opt_param.h 310MAXUSERS 311DFLDSIZ opt_param.h 312MAXDSIZ opt_param.h 313MAXSSIZ opt_param.h 314 315# Generic SCSI options. 316CAM_MAX_HIGHPOWER opt_cam.h 317CAMDEBUG opt_cam.h 318CAM_DEBUG_COMPILE opt_cam.h 319CAM_DEBUG_DELAY opt_cam.h 320CAM_DEBUG_BUS opt_cam.h 321CAM_DEBUG_TARGET opt_cam.h 322CAM_DEBUG_LUN opt_cam.h 323CAM_DEBUG_FLAGS opt_cam.h 324CAM_BOOT_DELAY opt_cam.h 325SCSI_DELAY opt_scsi.h 326SCSI_NO_SENSE_STRINGS opt_scsi.h 327SCSI_NO_OP_STRINGS opt_scsi.h 328 329# Options used only in cam/ata/ata_da.c 330ADA_TEST_FAILURE opt_ada.h 331ATA_STATIC_ID opt_ada.h 332 333# Options used only in cam/scsi/scsi_cd.c 334CHANGER_MIN_BUSY_SECONDS opt_cd.h 335CHANGER_MAX_BUSY_SECONDS opt_cd.h 336 337# Options used only in cam/scsi/scsi_sa.c. 338SA_IO_TIMEOUT opt_sa.h 339SA_SPACE_TIMEOUT opt_sa.h 340SA_REWIND_TIMEOUT opt_sa.h 341SA_ERASE_TIMEOUT opt_sa.h 342SA_1FM_AT_EOD opt_sa.h 343 344# Options used only in cam/scsi/scsi_pt.c 345SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 346 347# Options used only in cam/scsi/scsi_ses.c 348SES_ENABLE_PASSTHROUGH opt_ses.h 349 350# Options used in dev/sym/ (Symbios SCSI driver). 351SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 352 # Allows the ncr to take precedence 353 # 1 (1<<0) -> 810a, 860 354 # 2 (1<<1) -> 825a, 875, 885, 895 355 # 4 (1<<2) -> 895a, 896, 1510d 356SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 357 # disabled:0 (default), enabled:1 358SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 359 # disabled:0, enabled:1 (default) 360SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 361 # default:8, range:[1..64] 362 363# Options used only in pci/ncr.c 364SCSI_NCR_DEBUG opt_ncr.h 365SCSI_NCR_MAX_SYNC opt_ncr.h 366SCSI_NCR_MAX_WIDE opt_ncr.h 367SCSI_NCR_MYADDR opt_ncr.h 368 369# Options used only in dev/isp/* 370ISP_TARGET_MODE opt_isp.h 371ISP_FW_CRASH_DUMP opt_isp.h 372ISP_DEFAULT_ROLES opt_isp.h 373ISP_INTERNAL_TARGET opt_isp.h 374 375# Options used only in dev/iscsi 376ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 377 378# Net stuff. 379ACCEPT_FILTER_DATA 380ACCEPT_FILTER_DNS 381ACCEPT_FILTER_HTTP 382ALTQ opt_global.h 383ALTQ_CBQ opt_altq.h 384ALTQ_CDNR opt_altq.h 385ALTQ_DEBUG opt_altq.h 386ALTQ_HFSC opt_altq.h 387ALTQ_NOPCC opt_altq.h 388ALTQ_PRIQ opt_altq.h 389ALTQ_RED opt_altq.h 390ALTQ_RIO opt_altq.h 391BOOTP opt_bootp.h 392BOOTP_BLOCKSIZE opt_bootp.h 393BOOTP_COMPAT opt_bootp.h 394BOOTP_NFSROOT opt_bootp.h 395BOOTP_NFSV3 opt_bootp.h 396BOOTP_WIRED_TO opt_bootp.h 397DEVICE_POLLING 398DEV_ENC opt_enc.h 399DEV_PF opt_pf.h 400DEV_PFLOG opt_pf.h 401DEV_PFSYNC opt_pf.h 402DEV_VLAN opt_vlan.h 403DUMMYNET opt_ipdn.h 404INET opt_inet.h 405INET6 opt_inet6.h 406IPDIVERT 407IPFILTER opt_ipfilter.h 408IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 409IPFILTER_LOG opt_ipfilter.h 410IPFILTER_LOOKUP opt_ipfilter.h 411IPFIREWALL opt_ipfw.h 412IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 413IPFIREWALL_NAT opt_ipfw.h 414IPFIREWALL_VERBOSE opt_ipfw.h 415IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 416IPSEC opt_ipsec.h 417IPSEC_DEBUG opt_ipsec.h 418IPSEC_FILTERTUNNEL opt_ipsec.h 419IPSEC_NAT_T opt_ipsec.h 420IPSTEALTH 421KRPC 422LIBALIAS 423LIBMBPOOL 424LIBMCHAIN 425MBUF_PROFILING 426MBUF_STRESS_TEST 427MROUTING opt_mrouting.h 428NFSLOCKD 429PCBGROUP opt_pcbgroup.h 430PF_DEFAULT_TO_DROP opt_pf.h 431RADIX_MPATH opt_mpath.h 432ROUTETABLES opt_route.h 433RSS opt_rss.h 434SLIP_IFF_OPTS opt_slip.h 435TCPDEBUG 436TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading 437TCP_SIGNATURE opt_inet.h 438VLAN_ARRAY opt_vlan.h 439XBONEHACK 440FLOWTABLE opt_route.h 441FLOWTABLE_HASH_ALL opt_route.h 442 443# 444# SCTP 445# 446SCTP opt_sctp.h 447SCTP_DEBUG opt_sctp.h # Enable debug printfs 448SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril 449SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 450SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 451SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 452SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 453SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 454SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 455SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 456SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 457# 458# 459# 460 461# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 462# Each netgraph node type can be either be compiled into the kernel 463# or loaded dynamically. To get the former, include the corresponding 464# option below. Each type has its own man page, e.g. ng_async(4). 465NETGRAPH 466NETGRAPH_DEBUG opt_netgraph.h 467NETGRAPH_ASYNC opt_netgraph.h 468NETGRAPH_ATMLLC opt_netgraph.h 469NETGRAPH_ATM_ATMPIF opt_netgraph.h 470NETGRAPH_BLUETOOTH opt_netgraph.h 471NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 472NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 473NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 474NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 475NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 476NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 477NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 478NETGRAPH_BPF opt_netgraph.h 479NETGRAPH_BRIDGE opt_netgraph.h 480NETGRAPH_CAR opt_netgraph.h 481NETGRAPH_CISCO opt_netgraph.h 482NETGRAPH_DEFLATE opt_netgraph.h 483NETGRAPH_DEVICE opt_netgraph.h 484NETGRAPH_ECHO opt_netgraph.h 485NETGRAPH_EIFACE opt_netgraph.h 486NETGRAPH_ETHER opt_netgraph.h 487NETGRAPH_ETHER_ECHO opt_netgraph.h 488NETGRAPH_FEC opt_netgraph.h 489NETGRAPH_FRAME_RELAY opt_netgraph.h 490NETGRAPH_GIF opt_netgraph.h 491NETGRAPH_GIF_DEMUX opt_netgraph.h 492NETGRAPH_HOLE opt_netgraph.h 493NETGRAPH_IFACE opt_netgraph.h 494NETGRAPH_IP_INPUT opt_netgraph.h 495NETGRAPH_IPFW opt_netgraph.h 496NETGRAPH_KSOCKET opt_netgraph.h 497NETGRAPH_L2TP opt_netgraph.h 498NETGRAPH_LMI opt_netgraph.h 499# MPPC compression requires proprietary files (not included) 500NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 501NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 502NETGRAPH_NAT opt_netgraph.h 503NETGRAPH_NETFLOW opt_netgraph.h 504NETGRAPH_ONE2MANY opt_netgraph.h 505NETGRAPH_PATCH opt_netgraph.h 506NETGRAPH_PIPE opt_netgraph.h 507NETGRAPH_PPP opt_netgraph.h 508NETGRAPH_PPPOE opt_netgraph.h 509NETGRAPH_PPTPGRE opt_netgraph.h 510NETGRAPH_PRED1 opt_netgraph.h 511NETGRAPH_RFC1490 opt_netgraph.h 512NETGRAPH_SOCKET opt_netgraph.h 513NETGRAPH_SPLIT opt_netgraph.h 514NETGRAPH_SPPP opt_netgraph.h 515NETGRAPH_TAG opt_netgraph.h 516NETGRAPH_TCPMSS opt_netgraph.h 517NETGRAPH_TEE opt_netgraph.h 518NETGRAPH_TTY opt_netgraph.h 519NETGRAPH_UI opt_netgraph.h 520NETGRAPH_VJC opt_netgraph.h 521NETGRAPH_VLAN opt_netgraph.h 522 523# NgATM options 524NGATM_ATM opt_netgraph.h 525NGATM_ATMBASE opt_netgraph.h 526NGATM_SSCOP opt_netgraph.h 527NGATM_SSCFU opt_netgraph.h 528NGATM_UNI opt_netgraph.h 529NGATM_CCATM opt_netgraph.h 530 531# DRM options 532DRM_DEBUG opt_drm.h 533 534TI_SF_BUF_JUMBO opt_ti.h 535TI_JUMBO_HDRSPLIT opt_ti.h 536 537# XXX Conflict: # of devices vs network protocol (Native ATM). 538# This makes "atm.h" unusable. 539NATM 540 541# DPT driver debug flags 542DPT_MEASURE_PERFORMANCE opt_dpt.h 543DPT_RESET_HBA opt_dpt.h 544 545# Misc debug flags. Most of these should probably be replaced with 546# 'DEBUG', and then let people recompile just the interesting modules 547# with 'make CC="cc -DDEBUG"'. 548CLUSTERDEBUG opt_debug_cluster.h 549DEBUG_1284 opt_ppb_1284.h 550VP0_DEBUG opt_vpo.h 551LPT_DEBUG opt_lpt.h 552PLIP_DEBUG opt_plip.h 553LOCKF_DEBUG opt_debug_lockf.h 554SI_DEBUG opt_debug_si.h 555 556# Fb options 557FB_DEBUG opt_fb.h 558FB_INSTALL_CDEV opt_fb.h 559 560# ppbus related options 561PERIPH_1284 opt_ppb_1284.h 562DONTPROBE_1284 opt_ppb_1284.h 563 564# smbus related options 565ENABLE_ALART opt_intpm.h 566 567# These cause changes all over the kernel 568BLKDEV_IOSIZE opt_global.h 569BURN_BRIDGES opt_global.h 570DEBUG opt_global.h 571DEBUG_LOCKS opt_global.h 572DEBUG_VFS_LOCKS opt_global.h 573DFLTPHYS opt_global.h 574DIAGNOSTIC opt_global.h 575INVARIANT_SUPPORT opt_global.h 576INVARIANTS opt_global.h 577MAXCPU opt_global.h 578MAXMEMDOM opt_global.h 579MAXPHYS opt_global.h 580MCLSHIFT opt_global.h 581MUTEX_DEBUG opt_global.h 582MUTEX_NOINLINE opt_global.h 583LOCK_PROFILING opt_global.h 584LOCK_PROFILING_FAST opt_global.h 585MSIZE opt_global.h 586REGRESSION opt_global.h 587RWLOCK_NOINLINE opt_global.h 588SX_NOINLINE opt_global.h 589VFS_BIO_DEBUG opt_global.h 590 591# These are VM related options 592VM_KMEM_SIZE opt_vm.h 593VM_KMEM_SIZE_SCALE opt_vm.h 594VM_KMEM_SIZE_MAX opt_vm.h 595VM_NRESERVLEVEL opt_vm.h 596VM_LEVEL_0_ORDER opt_vm.h 597NO_SWAPPING opt_vm.h 598MALLOC_MAKE_FAILURES opt_vm.h 599MALLOC_PROFILE opt_vm.h 600MALLOC_DEBUG_MAXZONES opt_vm.h 601 602# The MemGuard replacement allocator used for tamper-after-free detection 603DEBUG_MEMGUARD opt_vm.h 604 605# The RedZone malloc(9) protection 606DEBUG_REDZONE opt_vm.h 607 608# Standard SMP options 609SMP opt_global.h 610 611# Size of the kernel message buffer 612MSGBUF_SIZE opt_msgbuf.h 613 614# NFS options 615NFS_MINATTRTIMO opt_nfs.h 616NFS_MAXATTRTIMO opt_nfs.h 617NFS_MINDIRATTRTIMO opt_nfs.h 618NFS_MAXDIRATTRTIMO opt_nfs.h 619NFS_GATHERDELAY opt_nfs.h 620NFS_WDELAYHASHSIZ opt_nfs.h 621NFS_DEBUG opt_nfs.h 622 623# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 624OVERRIDE_CARD opt_bktr.h 625OVERRIDE_TUNER opt_bktr.h 626OVERRIDE_DBX opt_bktr.h 627OVERRIDE_MSP opt_bktr.h 628BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 629BROOKTREE_ALLOC_PAGES opt_bktr.h 630BKTR_OVERRIDE_CARD opt_bktr.h 631BKTR_OVERRIDE_TUNER opt_bktr.h 632BKTR_OVERRIDE_DBX opt_bktr.h 633BKTR_OVERRIDE_MSP opt_bktr.h 634BKTR_SYSTEM_DEFAULT opt_bktr.h 635BKTR_ALLOC_PAGES opt_bktr.h 636BKTR_USE_PLL opt_bktr.h 637BKTR_GPIO_ACCESS opt_bktr.h 638BKTR_NO_MSP_RESET opt_bktr.h 639BKTR_430_FX_MODE opt_bktr.h 640BKTR_SIS_VIA_MODE opt_bktr.h 641BKTR_USE_FREEBSD_SMBUS opt_bktr.h 642BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 643 644# Options for uart(4) 645UART_PPS_ON_CTS opt_uart.h 646UART_POLL_FREQ opt_uart.h 647 648# options for bus/device framework 649BUS_DEBUG opt_bus.h 650 651# options for USB support 652USB_DEBUG opt_usb.h 653USB_HOST_ALIGN opt_usb.h 654USB_REQ_DEBUG opt_usb.h 655USB_TEMPLATE opt_usb.h 656USB_VERBOSE opt_usb.h 657USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 658U3G_DEBUG opt_u3g.h 659UKBD_DFLT_KEYMAP opt_ukbd.h 660UPLCOM_INTR_INTERVAL opt_uplcom.h 661UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 662UVSCOM_INTR_INTERVAL opt_uvscom.h 663 664# Embedded system options 665INIT_PATH 666 667ROOTDEVNAME 668 669FDC_DEBUG opt_fdc.h 670PCFCLOCK_VERBOSE opt_pcfclock.h 671PCFCLOCK_MAX_RETRIES opt_pcfclock.h 672 673KTR opt_global.h 674KTR_ALQ opt_ktr.h 675KTR_MASK opt_ktr.h 676KTR_CPUMASK opt_ktr.h 677KTR_COMPILE opt_global.h 678KTR_BOOT_ENTRIES opt_global.h 679KTR_ENTRIES opt_global.h 680KTR_VERBOSE opt_ktr.h 681WITNESS opt_global.h 682WITNESS_KDB opt_witness.h 683WITNESS_NO_VNODE opt_witness.h 684WITNESS_SKIPSPIN opt_witness.h 685OPENSOLARIS_WITNESS opt_global.h 686 687# options for ACPI support 688ACPI_DEBUG opt_acpi.h 689ACPI_MAX_TASKS opt_acpi.h 690ACPI_MAX_THREADS opt_acpi.h 691ACPI_DMAR opt_acpi.h 692 693# ISA support 694DEV_ISA opt_isa.h 695ISAPNP opt_isa.h 696 697# various 'device presence' options. 698DEV_BPF opt_bpf.h 699DEV_NETMAP opt_global.h 700DEV_MCA opt_mca.h 701DEV_CARP opt_carp.h 702DEV_SPLASH opt_splash.h 703 704# EISA support 705DEV_EISA opt_eisa.h 706EISA_SLOTS opt_eisa.h 707 708# ed driver 709ED_HPP opt_ed.h 710ED_3C503 opt_ed.h 711ED_SIC opt_ed.h 712 713# bce driver 714BCE_DEBUG opt_bce.h 715BCE_NVRAM_WRITE_SUPPORT opt_bce.h 716 717SOCKBUF_DEBUG opt_global.h 718 719 720# options for ubsec driver 721UBSEC_DEBUG opt_ubsec.h 722UBSEC_RNDTEST opt_ubsec.h 723UBSEC_NO_RNG opt_ubsec.h 724 725# options for hifn driver 726HIFN_DEBUG opt_hifn.h 727HIFN_RNDTEST opt_hifn.h 728 729# options for safenet driver 730SAFE_DEBUG opt_safe.h 731SAFE_NO_RNG opt_safe.h 732SAFE_RNDTEST opt_safe.h 733 734# syscons/vt options 735MAXCONS opt_syscons.h 736VT_FB_DEFAULT_WIDTH opt_syscons.h 737VT_FB_DEFAULT_HEIGHT opt_syscons.h 738SC_ALT_MOUSE_IMAGE opt_syscons.h 739SC_CUT_SPACES2TABS opt_syscons.h 740SC_CUT_SEPCHARS opt_syscons.h 741SC_DEBUG_LEVEL opt_syscons.h 742SC_DFLT_FONT opt_syscons.h 743SC_DISABLE_KDBKEY opt_syscons.h 744SC_DISABLE_REBOOT opt_syscons.h 745SC_HISTORY_SIZE opt_syscons.h 746SC_KERNEL_CONS_ATTR opt_syscons.h 747SC_KERNEL_CONS_REV_ATTR opt_syscons.h 748SC_MOUSE_CHAR opt_syscons.h 749SC_NO_CUTPASTE opt_syscons.h 750SC_NO_FONT_LOADING opt_syscons.h 751SC_NO_HISTORY opt_syscons.h 752SC_NO_MODE_CHANGE opt_syscons.h 753SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 754SC_NO_SYSMOUSE opt_syscons.h 755SC_NORM_ATTR opt_syscons.h 756SC_NORM_REV_ATTR opt_syscons.h 757SC_PIXEL_MODE opt_syscons.h 758SC_RENDER_DEBUG opt_syscons.h 759SC_TWOBUTTON_MOUSE opt_syscons.h 760DEV_SC opt_syscons.h 761DEV_VT opt_syscons.h 762 763 764# teken terminal emulator options 765TEKEN_CONS25 opt_teken.h 766TEKEN_UTF8 opt_teken.h 767 768# options for printf 769PRINTF_BUFR_SIZE opt_printf.h 770 771# kbd options 772KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 773KBD_INSTALL_CDEV opt_kbd.h 774KBD_MAXRETRY opt_kbd.h 775KBD_MAXWAIT opt_kbd.h 776KBD_RESETDELAY opt_kbd.h 777KBDIO_DEBUG opt_kbd.h 778 779# options for the Atheros driver 780ATH_DEBUG opt_ath.h 781ATH_TXBUF opt_ath.h 782ATH_RXBUF opt_ath.h 783ATH_DIAGAPI opt_ath.h 784ATH_TX99_DIAG opt_ath.h 785ATH_ENABLE_11N opt_ath.h 786ATH_ENABLE_DFS opt_ath.h 787ATH_EEPROM_FIRMWARE opt_ath.h 788ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 789ATH_DEBUG_ALQ opt_ath.h 790ATH_KTR_INTR_DEBUG opt_ath.h 791 792# options for the Atheros hal 793AH_SUPPORT_AR5416 opt_ah.h 794# XXX For now, this breaks non-AR9130 chipsets, so only use it 795# XXX when actually targetting AR9130. 796AH_SUPPORT_AR9130 opt_ah.h 797 798# This is required for AR933x SoC support 799AH_SUPPORT_AR9330 opt_ah.h 800AH_SUPPORT_AR9340 opt_ah.h 801 802AH_DEBUG opt_ah.h 803AH_ASSERT opt_ah.h 804AH_DEBUG_ALQ opt_ah.h 805AH_REGOPS_FUNC opt_ah.h 806AH_WRITE_REGDOMAIN opt_ah.h 807AH_DEBUG_COUNTRY opt_ah.h 808AH_WRITE_EEPROM opt_ah.h 809AH_PRIVATE_DIAG opt_ah.h 810AH_NEED_DESC_SWAP opt_ah.h 811AH_USE_INIPDGAIN opt_ah.h 812AH_MAXCHAN opt_ah.h 813AH_RXCFG_SDMAMW_4BYTES opt_ah.h 814AH_INTERRUPT_DEBUGGING opt_ah.h 815# AR5416 and later interrupt mitigation 816# XXX do not use this for AR9130 817AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 818 819# options for the Broadcom BCM43xx driver (bwi) 820BWI_DEBUG opt_bwi.h 821BWI_DEBUG_VERBOSE opt_bwi.h 822 823# options for the Marvell 8335 wireless driver 824MALO_DEBUG opt_malo.h 825MALO_TXBUF opt_malo.h 826MALO_RXBUF opt_malo.h 827 828# options for the Marvell wireless driver 829MWL_DEBUG opt_mwl.h 830MWL_TXBUF opt_mwl.h 831MWL_RXBUF opt_mwl.h 832MWL_DIAGAPI opt_mwl.h 833MWL_AGGR_SIZE opt_mwl.h 834MWL_TX_NODROP opt_mwl.h 835 836# Options for the Intel 802.11n wireless driver 837IWN_DEBUG opt_iwn.h 838 839# dcons options 840DCONS_BUF_SIZE opt_dcons.h 841DCONS_POLL_HZ opt_dcons.h 842DCONS_FORCE_CONSOLE opt_dcons.h 843DCONS_FORCE_GDB opt_dcons.h 844 845# HWPMC options 846HWPMC_HOOKS 847HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h 848 849# XBOX options for FreeBSD/i386, but some files are MI 850XBOX opt_xbox.h 851 852# Interrupt filtering 853INTR_FILTER 854 855# 802.11 support layer 856IEEE80211_DEBUG opt_wlan.h 857IEEE80211_DEBUG_REFCNT opt_wlan.h 858IEEE80211_AMPDU_AGE opt_wlan.h 859IEEE80211_SUPPORT_MESH opt_wlan.h 860IEEE80211_SUPPORT_SUPERG opt_wlan.h 861IEEE80211_SUPPORT_TDMA opt_wlan.h 862IEEE80211_ALQ opt_wlan.h 863IEEE80211_DFS_DEBUG opt_wlan.h 864 865# 802.11 TDMA support 866TDMA_SLOTLEN_DEFAULT opt_tdma.h 867TDMA_SLOTCNT_DEFAULT opt_tdma.h 868TDMA_BINTVAL_DEFAULT opt_tdma.h 869TDMA_TXRATE_11B_DEFAULT opt_tdma.h 870TDMA_TXRATE_11G_DEFAULT opt_tdma.h 871TDMA_TXRATE_11A_DEFAULT opt_tdma.h 872TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 873TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 874TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 875TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 876TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 877 878# Network stack virtualization options 879VIMAGE opt_global.h 880VNET_DEBUG opt_global.h 881 882# Common Flash Interface (CFI) options 883CFI_SUPPORT_STRATAFLASH opt_cfi.h 884CFI_ARMEDANDDANGEROUS opt_cfi.h 885 886# Sound options 887SND_DEBUG opt_snd.h 888SND_DIAGNOSTIC opt_snd.h 889SND_FEEDER_MULTIFORMAT opt_snd.h 890SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 891SND_FEEDER_RATE_HP opt_snd.h 892SND_PCM_64 opt_snd.h 893SND_OLDSTEREO opt_snd.h 894 895X86BIOS 896 897# Flattened device tree options 898FDT opt_platform.h 899FDT_DTB_STATIC opt_platform.h 900 901# OFED Infiniband stack 902OFED opt_ofed.h 903OFED_DEBUG_INIT opt_ofed.h 904SDP opt_ofed.h 905SDP_DEBUG opt_ofed.h 906IPOIB opt_ofed.h 907IPOIB_DEBUG opt_ofed.h 908IPOIB_CM opt_ofed.h 909 910# Resource Accounting 911RACCT opt_global.h 912 913# Resource Limits 914RCTL opt_global.h 915 916# Random number generator(s) 917RANDOM_YARROW opt_random.h 918RANDOM_FORTUNA opt_random.h 919RANDOM_DEBUG opt_random.h 920RANDOM_RWFILE opt_random.h 921