xref: /freebsd/sys/conf/ldscript.arm64 (revision 4fefe1b763573c873bf3dbf3b6f28c22de0ffada)
1OUTPUT_ARCH(aarch64)
2ENTRY(_start)
3
4SEARCH_DIR(/usr/lib);
5SECTIONS
6{
7  /* Read-only sections, merged into text segment: */
8  . = text_start; /* This is set using --defsym= on the command line. */
9  .vmm_vectors : { *(.vmm_vectors) }
10  .text      :
11  {
12    *(.text)
13    *(.stub)
14    /* .gnu.warning sections are handled specially by elf32.em.  */
15    *(.gnu.warning)
16    *(.gnu.linkonce.t*)
17  } =0x9090
18  _etext = .;
19  PROVIDE (etext = .);
20
21  .fini      : { *(.fini)    } =0x9090
22  .rodata    : { *(.rodata*) *(.gnu.linkonce.r*) }
23  .rodata1   : { *(.rodata1) }
24   .interp     : { *(.interp) 	}
25  .hash          : { *(.hash)		}
26  .dynsym        : { *(.dynsym)		}
27  .dynstr        : { *(.dynstr)		}
28  .gnu.version   : { *(.gnu.version)	}
29  .gnu.version_d   : { *(.gnu.version_d)	}
30  .gnu.version_r   : { *(.gnu.version_r)	}
31  .note.gnu.build-id : {
32    PROVIDE (__build_id_start = .);
33    *(.note.gnu.build-id)
34    PROVIDE (__build_id_end = .);
35  }
36  .rel.text      :
37    { *(.rel.text) *(.rel.gnu.linkonce.t*) }
38  .rela.text     :
39    { *(.rela.text) *(.rela.gnu.linkonce.t*) }
40  .rel.data      :
41    { *(.rel.data) *(.rel.gnu.linkonce.d*) }
42  .rela.data     :
43    { *(.rela.data) *(.rela.gnu.linkonce.d*) }
44  .rel.rodata    :
45    { *(.rel.rodata) *(.rel.gnu.linkonce.r*) }
46  .rela.rodata   :
47    { *(.rela.rodata) *(.rela.gnu.linkonce.r*) }
48  .rel.got       : { *(.rel.got)		}
49  .rela.got      : { *(.rela.got)		}
50  .rel.ctors     : { *(.rel.ctors)	}
51  .rela.ctors    : { *(.rela.ctors)	}
52  .rel.dtors     : { *(.rel.dtors)	}
53  .rela.dtors    : { *(.rela.dtors)	}
54  .rel.init      : { *(.rel.init)	}
55  .rela.init     : { *(.rela.init)	}
56  .rel.fini      : { *(.rel.fini)	}
57  .rela.fini     : { *(.rela.fini)	}
58  .rel.bss       : { *(.rel.bss)		}
59  .rela.bss      : { *(.rela.bss)		}
60  .rel.plt       : { *(.rel.plt)		}
61  .rela.plt      : { *(.rela.plt)		}
62  .init          : { *(.init)	} =0x9090
63  .plt      : { *(.plt)	}
64
65  . = ALIGN(4);
66  _extab_start = .;
67  PROVIDE(extab_start = .);
68  .ARM.extab : { *(.ARM.extab) }
69  _extab.end = .;
70  PROVIDE(extab_end = .);
71
72  _exidx_start = .;
73  PROVIDE(exidx_start = .);
74  .ARM.exidx : { *(.ARM.exidx) }
75  _exidx_end = .;
76  PROVIDE(exidx_end = .);
77
78  /* Adjust the address for the data segment.  We want to adjust up to
79     the same address within the page on the next page up.  */
80  . = ALIGN(0x1000) + (. & (0x1000 - 1)) ;
81  .data    :
82  {
83    *(.data)
84    *(.gnu.linkonce.d*)
85  }
86  . = ALIGN(128);
87  .data.read_frequently :
88  {
89    *(SORT_BY_ALIGNMENT(.data.read_frequently))
90  }
91  .data.read_mostly :
92  {
93    *(.data.read_mostly)
94  }
95  . = ALIGN(128);
96  .data.exclusive_cache_line :
97  {
98    *(.data.exclusive_cache_line)
99  }
100  . = ALIGN(128);
101  .data1   : { *(.data1) }
102  . = ALIGN(32 / 8);
103  _start_ctors = .;
104  PROVIDE (start_ctors = .);
105  .ctors         :
106  {
107    *(.ctors)
108  }
109  _stop_ctors = .;
110  PROVIDE (stop_ctors = .);
111  .dtors         :
112  {
113    *(.dtors)
114  }
115  .got           : { *(.got.plt) *(.got) }
116  .dynamic       : { *(.dynamic) }
117  /* We want the small data sections together, so single-instruction offsets
118     can access them all, and initialized data all before uninitialized, so
119     we can shorten the on-disk segment size.  */
120  . = ALIGN(8);
121  .sdata     : { *(.sdata) }
122  _edata  =  .;
123  PROVIDE (edata = .);
124  __bss_start = .;
125  .sbss      : { *(.sbss) *(.scommon) }
126  .bss       :
127  {
128   *(.dynbss)
129   *(.bss)
130   *(COMMON)
131   . = ALIGN(8);
132   __bss_end = .;
133   /* A section for the initial page table, it doesn't need to be in the
134      kernel file, however unlike normal .bss entries should not be zeroed
135      out as we use it before the .bss section is cleared. */
136   *(.init_pagetable)
137  }
138  _end = . ;
139  PROVIDE (end = .);
140  /* Stabs debugging sections.  */
141  .stab 0 : { *(.stab) }
142  .stabstr 0 : { *(.stabstr) }
143  .stab.excl 0 : { *(.stab.excl) }
144  .stab.exclstr 0 : { *(.stab.exclstr) }
145  .stab.index 0 : { *(.stab.index) }
146  .stab.indexstr 0 : { *(.stab.indexstr) }
147  .comment 0 : { *(.comment) }
148  /* DWARF debug sections.
149     Symbols in the DWARF debugging sections are relative to the beginning
150     of the section so we begin them at 0.  */
151  /* DWARF 1 */
152  .debug          0 : { *(.debug) }
153  .line           0 : { *(.line) }
154  /* GNU DWARF 1 extensions */
155  .debug_srcinfo  0 : { *(.debug_srcinfo) }
156  .debug_sfnames  0 : { *(.debug_sfnames) }
157  /* DWARF 1.1 and DWARF 2 */
158  .debug_aranges  0 : { *(.debug_aranges) }
159  .debug_pubnames 0 : { *(.debug_pubnames) }
160  /* DWARF 2 */
161  .debug_info     0 : { *(.debug_info) }
162  .debug_abbrev   0 : { *(.debug_abbrev) }
163  .debug_line     0 : { *(.debug_line) }
164  .debug_frame    0 : { *(.debug_frame) }
165  .debug_str      0 : { *(.debug_str) }
166  .debug_loc      0 : { *(.debug_loc) }
167  .debug_macinfo  0 : { *(.debug_macinfo) }
168  /* SGI/MIPS DWARF 2 extensions */
169  .debug_weaknames 0 : { *(.debug_weaknames) }
170  .debug_funcnames 0 : { *(.debug_funcnames) }
171  .debug_typenames 0 : { *(.debug_typenames) }
172  .debug_varnames  0 : { *(.debug_varnames) }
173
174  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
175  /DISCARD/ : { *(.note.GNU-stack) }
176}
177