1 /* $FreeBSD$ */ 2 /*- 3 * Copyright (c) 2007 Luigi Rizzo - Universita` di Pisa. All rights reserved. 4 * Copyright (c) 2007 Hans Petter Selasky. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 */ 27 28 #ifdef USB_GLOBAL_INCLUDE_FILE 29 #include USB_GLOBAL_INCLUDE_FILE 30 #else 31 #include <sys/stdint.h> 32 #include <sys/stddef.h> 33 #include <sys/param.h> 34 #include <sys/queue.h> 35 #include <sys/types.h> 36 #include <sys/systm.h> 37 #include <sys/kernel.h> 38 #include <sys/bus.h> 39 #include <sys/module.h> 40 #include <sys/lock.h> 41 #include <sys/mutex.h> 42 #include <sys/condvar.h> 43 #include <sys/sysctl.h> 44 #include <sys/sx.h> 45 #include <sys/unistd.h> 46 #include <sys/callout.h> 47 #include <sys/malloc.h> 48 #include <sys/priv.h> 49 50 #include <dev/usb/usb.h> 51 #include <dev/usb/usbdi.h> 52 #include <dev/usb/usbdi_util.h> 53 54 #define USB_DEBUG_VAR usb_debug 55 56 #include <dev/usb/usb_core.h> 57 #include <linux/usb.h> 58 #include <dev/usb/usb_process.h> 59 #include <dev/usb/usb_device.h> 60 #include <dev/usb/usb_util.h> 61 #include <dev/usb/usb_busdma.h> 62 #include <dev/usb/usb_transfer.h> 63 #include <dev/usb/usb_hub.h> 64 #include <dev/usb/usb_request.h> 65 #include <dev/usb/usb_debug.h> 66 #include <dev/usb/usb_dynamic.h> 67 #endif /* USB_GLOBAL_INCLUDE_FILE */ 68 69 struct usb_linux_softc { 70 LIST_ENTRY(usb_linux_softc) sc_attached_list; 71 72 device_t sc_fbsd_dev; 73 struct usb_device *sc_fbsd_udev; 74 struct usb_interface *sc_ui; 75 struct usb_driver *sc_udrv; 76 }; 77 78 /* prototypes */ 79 static device_probe_t usb_linux_probe; 80 static device_attach_t usb_linux_attach; 81 static device_detach_t usb_linux_detach; 82 static device_suspend_t usb_linux_suspend; 83 static device_resume_t usb_linux_resume; 84 85 static usb_callback_t usb_linux_isoc_callback; 86 static usb_callback_t usb_linux_non_isoc_callback; 87 88 static usb_complete_t usb_linux_wait_complete; 89 90 static uint16_t usb_max_isoc_frames(struct usb_device *); 91 static int usb_start_wait_urb(struct urb *, usb_timeout_t, uint16_t *); 92 static const struct usb_device_id *usb_linux_lookup_id( 93 const struct usb_device_id *, struct usb_attach_arg *); 94 static struct usb_driver *usb_linux_get_usb_driver(struct usb_linux_softc *); 95 static int usb_linux_create_usb_device(struct usb_device *, device_t); 96 static void usb_linux_cleanup_interface(struct usb_device *, 97 struct usb_interface *); 98 static void usb_linux_complete(struct usb_xfer *); 99 static int usb_unlink_urb_sub(struct urb *, uint8_t); 100 101 /*------------------------------------------------------------------------* 102 * FreeBSD USB interface 103 *------------------------------------------------------------------------*/ 104 105 static LIST_HEAD(, usb_linux_softc) usb_linux_attached_list; 106 static LIST_HEAD(, usb_driver) usb_linux_driver_list; 107 108 static device_method_t usb_linux_methods[] = { 109 /* Device interface */ 110 DEVMETHOD(device_probe, usb_linux_probe), 111 DEVMETHOD(device_attach, usb_linux_attach), 112 DEVMETHOD(device_detach, usb_linux_detach), 113 DEVMETHOD(device_suspend, usb_linux_suspend), 114 DEVMETHOD(device_resume, usb_linux_resume), 115 116 DEVMETHOD_END 117 }; 118 119 static driver_t usb_linux_driver = { 120 .name = "usb_linux", 121 .methods = usb_linux_methods, 122 .size = sizeof(struct usb_linux_softc), 123 }; 124 125 static devclass_t usb_linux_devclass; 126 127 DRIVER_MODULE(usb_linux, uhub, usb_linux_driver, usb_linux_devclass, NULL, 0); 128 MODULE_VERSION(usb_linux, 1); 129 130 /*------------------------------------------------------------------------* 131 * usb_linux_lookup_id 132 * 133 * This functions takes an array of "struct usb_device_id" and tries 134 * to match the entries with the information in "struct usb_attach_arg". 135 * If it finds a match the matching entry will be returned. 136 * Else "NULL" will be returned. 137 *------------------------------------------------------------------------*/ 138 static const struct usb_device_id * 139 usb_linux_lookup_id(const struct usb_device_id *id, struct usb_attach_arg *uaa) 140 { 141 if (id == NULL) { 142 goto done; 143 } 144 /* 145 * Keep on matching array entries until we find one with 146 * "match_flags" equal to zero, which indicates the end of the 147 * array: 148 */ 149 for (; id->match_flags; id++) { 150 if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && 151 (id->idVendor != uaa->info.idVendor)) { 152 continue; 153 } 154 if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) && 155 (id->idProduct != uaa->info.idProduct)) { 156 continue; 157 } 158 if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) && 159 (id->bcdDevice_lo > uaa->info.bcdDevice)) { 160 continue; 161 } 162 if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) && 163 (id->bcdDevice_hi < uaa->info.bcdDevice)) { 164 continue; 165 } 166 if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) && 167 (id->bDeviceClass != uaa->info.bDeviceClass)) { 168 continue; 169 } 170 if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) && 171 (id->bDeviceSubClass != uaa->info.bDeviceSubClass)) { 172 continue; 173 } 174 if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) && 175 (id->bDeviceProtocol != uaa->info.bDeviceProtocol)) { 176 continue; 177 } 178 if ((uaa->info.bDeviceClass == 0xFF) && 179 !(id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && 180 (id->match_flags & (USB_DEVICE_ID_MATCH_INT_CLASS | 181 USB_DEVICE_ID_MATCH_INT_SUBCLASS | 182 USB_DEVICE_ID_MATCH_INT_PROTOCOL))) { 183 continue; 184 } 185 if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) && 186 (id->bInterfaceClass != uaa->info.bInterfaceClass)) { 187 continue; 188 } 189 if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_SUBCLASS) && 190 (id->bInterfaceSubClass != uaa->info.bInterfaceSubClass)) { 191 continue; 192 } 193 if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_PROTOCOL) && 194 (id->bInterfaceProtocol != uaa->info.bInterfaceProtocol)) { 195 continue; 196 } 197 /* we found a match! */ 198 return (id); 199 } 200 201 done: 202 return (NULL); 203 } 204 205 /*------------------------------------------------------------------------* 206 * usb_linux_probe 207 * 208 * This function is the FreeBSD probe callback. It is called from the 209 * FreeBSD USB stack through the "device_probe_and_attach()" function. 210 *------------------------------------------------------------------------*/ 211 static int 212 usb_linux_probe(device_t dev) 213 { 214 struct usb_attach_arg *uaa = device_get_ivars(dev); 215 struct usb_driver *udrv; 216 int err = ENXIO; 217 218 if (uaa->usb_mode != USB_MODE_HOST) { 219 return (ENXIO); 220 } 221 mtx_lock(&Giant); 222 LIST_FOREACH(udrv, &usb_linux_driver_list, linux_driver_list) { 223 if (usb_linux_lookup_id(udrv->id_table, uaa)) { 224 err = 0; 225 break; 226 } 227 } 228 mtx_unlock(&Giant); 229 230 return (err); 231 } 232 233 /*------------------------------------------------------------------------* 234 * usb_linux_get_usb_driver 235 * 236 * This function returns the pointer to the "struct usb_driver" where 237 * the Linux USB device driver "struct usb_device_id" match was found. 238 * We apply a lock before reading out the pointer to avoid races. 239 *------------------------------------------------------------------------*/ 240 static struct usb_driver * 241 usb_linux_get_usb_driver(struct usb_linux_softc *sc) 242 { 243 struct usb_driver *udrv; 244 245 mtx_lock(&Giant); 246 udrv = sc->sc_udrv; 247 mtx_unlock(&Giant); 248 return (udrv); 249 } 250 251 /*------------------------------------------------------------------------* 252 * usb_linux_attach 253 * 254 * This function is the FreeBSD attach callback. It is called from the 255 * FreeBSD USB stack through the "device_probe_and_attach()" function. 256 * This function is called when "usb_linux_probe()" returns zero. 257 *------------------------------------------------------------------------*/ 258 static int 259 usb_linux_attach(device_t dev) 260 { 261 struct usb_attach_arg *uaa = device_get_ivars(dev); 262 struct usb_linux_softc *sc = device_get_softc(dev); 263 struct usb_driver *udrv; 264 const struct usb_device_id *id = NULL; 265 266 mtx_lock(&Giant); 267 LIST_FOREACH(udrv, &usb_linux_driver_list, linux_driver_list) { 268 id = usb_linux_lookup_id(udrv->id_table, uaa); 269 if (id) 270 break; 271 } 272 mtx_unlock(&Giant); 273 274 if (id == NULL) { 275 return (ENXIO); 276 } 277 if (usb_linux_create_usb_device(uaa->device, dev) != 0) 278 return (ENOMEM); 279 device_set_usb_desc(dev); 280 281 sc->sc_fbsd_udev = uaa->device; 282 sc->sc_fbsd_dev = dev; 283 sc->sc_udrv = udrv; 284 sc->sc_ui = usb_ifnum_to_if(uaa->device, uaa->info.bIfaceNum); 285 if (sc->sc_ui == NULL) { 286 return (EINVAL); 287 } 288 if (udrv->probe) { 289 if ((udrv->probe) (sc->sc_ui, id)) { 290 return (ENXIO); 291 } 292 } 293 mtx_lock(&Giant); 294 LIST_INSERT_HEAD(&usb_linux_attached_list, sc, sc_attached_list); 295 mtx_unlock(&Giant); 296 297 /* success */ 298 return (0); 299 } 300 301 /*------------------------------------------------------------------------* 302 * usb_linux_detach 303 * 304 * This function is the FreeBSD detach callback. It is called from the 305 * FreeBSD USB stack through the "device_detach()" function. 306 *------------------------------------------------------------------------*/ 307 static int 308 usb_linux_detach(device_t dev) 309 { 310 struct usb_linux_softc *sc = device_get_softc(dev); 311 struct usb_driver *udrv = NULL; 312 313 mtx_lock(&Giant); 314 if (sc->sc_attached_list.le_prev) { 315 LIST_REMOVE(sc, sc_attached_list); 316 sc->sc_attached_list.le_prev = NULL; 317 udrv = sc->sc_udrv; 318 sc->sc_udrv = NULL; 319 } 320 mtx_unlock(&Giant); 321 322 if (udrv && udrv->disconnect) { 323 (udrv->disconnect) (sc->sc_ui); 324 } 325 /* 326 * Make sure that we free all FreeBSD USB transfers belonging to 327 * this Linux "usb_interface", hence they will most likely not be 328 * needed any more. 329 */ 330 usb_linux_cleanup_interface(sc->sc_fbsd_udev, sc->sc_ui); 331 return (0); 332 } 333 334 /*------------------------------------------------------------------------* 335 * usb_linux_suspend 336 * 337 * This function is the FreeBSD suspend callback. Usually it does nothing. 338 *------------------------------------------------------------------------*/ 339 static int 340 usb_linux_suspend(device_t dev) 341 { 342 struct usb_linux_softc *sc = device_get_softc(dev); 343 struct usb_driver *udrv = usb_linux_get_usb_driver(sc); 344 int err; 345 346 err = 0; 347 if (udrv && udrv->suspend) 348 err = (udrv->suspend) (sc->sc_ui, 0); 349 return (-err); 350 } 351 352 /*------------------------------------------------------------------------* 353 * usb_linux_resume 354 * 355 * This function is the FreeBSD resume callback. Usually it does nothing. 356 *------------------------------------------------------------------------*/ 357 static int 358 usb_linux_resume(device_t dev) 359 { 360 struct usb_linux_softc *sc = device_get_softc(dev); 361 struct usb_driver *udrv = usb_linux_get_usb_driver(sc); 362 int err; 363 364 err = 0; 365 if (udrv && udrv->resume) 366 err = (udrv->resume) (sc->sc_ui); 367 return (-err); 368 } 369 370 /*------------------------------------------------------------------------* 371 * Linux emulation layer 372 *------------------------------------------------------------------------*/ 373 374 /*------------------------------------------------------------------------* 375 * usb_max_isoc_frames 376 * 377 * The following function returns the maximum number of isochronous 378 * frames that we support per URB. It is not part of the Linux USB API. 379 *------------------------------------------------------------------------*/ 380 static uint16_t 381 usb_max_isoc_frames(struct usb_device *dev) 382 { 383 ; /* indent fix */ 384 switch (usbd_get_speed(dev)) { 385 case USB_SPEED_LOW: 386 case USB_SPEED_FULL: 387 return (USB_MAX_FULL_SPEED_ISOC_FRAMES); 388 default: 389 return (USB_MAX_HIGH_SPEED_ISOC_FRAMES); 390 } 391 } 392 393 /*------------------------------------------------------------------------* 394 * usb_submit_urb 395 * 396 * This function is used to queue an URB after that it has been 397 * initialized. If it returns non-zero, it means that the URB was not 398 * queued. 399 *------------------------------------------------------------------------*/ 400 int 401 usb_submit_urb(struct urb *urb, uint16_t mem_flags) 402 { 403 struct usb_host_endpoint *uhe; 404 uint8_t do_unlock; 405 int err; 406 407 if (urb == NULL) 408 return (-EINVAL); 409 410 do_unlock = mtx_owned(&Giant) ? 0 : 1; 411 if (do_unlock) 412 mtx_lock(&Giant); 413 414 if (urb->endpoint == NULL) { 415 err = -EINVAL; 416 goto done; 417 } 418 419 /* 420 * Check to see if the urb is in the process of being killed 421 * and stop a urb that is in the process of being killed from 422 * being re-submitted (e.g. from its completion callback 423 * function). 424 */ 425 if (urb->kill_count != 0) { 426 err = -EPERM; 427 goto done; 428 } 429 430 uhe = urb->endpoint; 431 432 /* 433 * Check that we have got a FreeBSD USB transfer that will dequeue 434 * the URB structure and do the real transfer. If there are no USB 435 * transfers, then we return an error. 436 */ 437 if (uhe->bsd_xfer[0] || 438 uhe->bsd_xfer[1]) { 439 /* we are ready! */ 440 441 TAILQ_INSERT_TAIL(&uhe->bsd_urb_list, urb, bsd_urb_list); 442 443 urb->status = -EINPROGRESS; 444 445 usbd_transfer_start(uhe->bsd_xfer[0]); 446 usbd_transfer_start(uhe->bsd_xfer[1]); 447 err = 0; 448 } else { 449 /* no pipes have been setup yet! */ 450 urb->status = -EINVAL; 451 err = -EINVAL; 452 } 453 done: 454 if (do_unlock) 455 mtx_unlock(&Giant); 456 return (err); 457 } 458 459 /*------------------------------------------------------------------------* 460 * usb_unlink_urb 461 * 462 * This function is used to stop an URB after that it is been 463 * submitted, but before the "complete" callback has been called. On 464 *------------------------------------------------------------------------*/ 465 int 466 usb_unlink_urb(struct urb *urb) 467 { 468 return (usb_unlink_urb_sub(urb, 0)); 469 } 470 471 static void 472 usb_unlink_bsd(struct usb_xfer *xfer, 473 struct urb *urb, uint8_t drain) 474 { 475 if (xfer == NULL) 476 return; 477 if (!usbd_transfer_pending(xfer)) 478 return; 479 if (xfer->priv_fifo == (void *)urb) { 480 if (drain) { 481 mtx_unlock(&Giant); 482 usbd_transfer_drain(xfer); 483 mtx_lock(&Giant); 484 } else { 485 usbd_transfer_stop(xfer); 486 } 487 usbd_transfer_start(xfer); 488 } 489 } 490 491 static int 492 usb_unlink_urb_sub(struct urb *urb, uint8_t drain) 493 { 494 struct usb_host_endpoint *uhe; 495 uint16_t x; 496 uint8_t do_unlock; 497 int err; 498 499 if (urb == NULL) 500 return (-EINVAL); 501 502 do_unlock = mtx_owned(&Giant) ? 0 : 1; 503 if (do_unlock) 504 mtx_lock(&Giant); 505 if (drain) 506 urb->kill_count++; 507 508 if (urb->endpoint == NULL) { 509 err = -EINVAL; 510 goto done; 511 } 512 uhe = urb->endpoint; 513 514 if (urb->bsd_urb_list.tqe_prev) { 515 /* not started yet, just remove it from the queue */ 516 TAILQ_REMOVE(&uhe->bsd_urb_list, urb, bsd_urb_list); 517 urb->bsd_urb_list.tqe_prev = NULL; 518 urb->status = -ECONNRESET; 519 urb->actual_length = 0; 520 521 for (x = 0; x < urb->number_of_packets; x++) { 522 urb->iso_frame_desc[x].actual_length = 0; 523 } 524 525 if (urb->complete) { 526 (urb->complete) (urb); 527 } 528 } else { 529 /* 530 * If the URB is not on the URB list, then check if one of 531 * the FreeBSD USB transfer are processing the current URB. 532 * If so, re-start that transfer, which will lead to the 533 * termination of that URB: 534 */ 535 usb_unlink_bsd(uhe->bsd_xfer[0], urb, drain); 536 usb_unlink_bsd(uhe->bsd_xfer[1], urb, drain); 537 } 538 err = 0; 539 done: 540 if (drain) 541 urb->kill_count--; 542 if (do_unlock) 543 mtx_unlock(&Giant); 544 return (err); 545 } 546 547 /*------------------------------------------------------------------------* 548 * usb_clear_halt 549 * 550 * This function must always be used to clear the stall. Stall is when 551 * an USB endpoint returns a stall message to the USB host controller. 552 * Until the stall is cleared, no data can be transferred. 553 *------------------------------------------------------------------------*/ 554 int 555 usb_clear_halt(struct usb_device *dev, struct usb_host_endpoint *uhe) 556 { 557 struct usb_config cfg[1]; 558 struct usb_endpoint *ep; 559 uint8_t type; 560 uint8_t addr; 561 562 if (uhe == NULL) 563 return (-EINVAL); 564 565 type = uhe->desc.bmAttributes & UE_XFERTYPE; 566 addr = uhe->desc.bEndpointAddress; 567 568 memset(cfg, 0, sizeof(cfg)); 569 570 cfg[0].type = type; 571 cfg[0].endpoint = addr & UE_ADDR; 572 cfg[0].direction = addr & (UE_DIR_OUT | UE_DIR_IN); 573 574 ep = usbd_get_endpoint(dev, uhe->bsd_iface_index, cfg); 575 if (ep == NULL) 576 return (-EINVAL); 577 578 usbd_clear_data_toggle(dev, ep); 579 580 return (usb_control_msg(dev, &dev->ep0, 581 UR_CLEAR_FEATURE, UT_WRITE_ENDPOINT, 582 UF_ENDPOINT_HALT, addr, NULL, 0, 1000)); 583 } 584 585 /*------------------------------------------------------------------------* 586 * usb_start_wait_urb 587 * 588 * This is an internal function that is used to perform synchronous 589 * Linux USB transfers. 590 *------------------------------------------------------------------------*/ 591 static int 592 usb_start_wait_urb(struct urb *urb, usb_timeout_t timeout, uint16_t *p_actlen) 593 { 594 int err; 595 uint8_t do_unlock; 596 597 /* you must have a timeout! */ 598 if (timeout == 0) { 599 timeout = 1; 600 } 601 urb->complete = &usb_linux_wait_complete; 602 urb->timeout = timeout; 603 urb->transfer_flags |= URB_WAIT_WAKEUP; 604 urb->transfer_flags &= ~URB_IS_SLEEPING; 605 606 do_unlock = mtx_owned(&Giant) ? 0 : 1; 607 if (do_unlock) 608 mtx_lock(&Giant); 609 err = usb_submit_urb(urb, 0); 610 if (err) 611 goto done; 612 613 /* 614 * the URB might have completed before we get here, so check that by 615 * using some flags! 616 */ 617 while (urb->transfer_flags & URB_WAIT_WAKEUP) { 618 urb->transfer_flags |= URB_IS_SLEEPING; 619 cv_wait(&urb->cv_wait, &Giant); 620 urb->transfer_flags &= ~URB_IS_SLEEPING; 621 } 622 623 err = urb->status; 624 625 done: 626 if (do_unlock) 627 mtx_unlock(&Giant); 628 if (p_actlen != NULL) { 629 if (err) 630 *p_actlen = 0; 631 else 632 *p_actlen = urb->actual_length; 633 } 634 return (err); 635 } 636 637 /*------------------------------------------------------------------------* 638 * usb_control_msg 639 * 640 * The following function performs a control transfer sequence one any 641 * control, bulk or interrupt endpoint, specified by "uhe". A control 642 * transfer means that you transfer an 8-byte header first followed by 643 * a data-phase as indicated by the 8-byte header. The "timeout" is 644 * given in milliseconds. 645 * 646 * Return values: 647 * 0: Success 648 * < 0: Failure 649 * > 0: Actual length 650 *------------------------------------------------------------------------*/ 651 int 652 usb_control_msg(struct usb_device *dev, struct usb_host_endpoint *uhe, 653 uint8_t request, uint8_t requesttype, 654 uint16_t value, uint16_t index, void *data, 655 uint16_t size, usb_timeout_t timeout) 656 { 657 struct usb_device_request req; 658 struct urb *urb; 659 int err; 660 uint16_t actlen; 661 uint8_t type; 662 uint8_t addr; 663 664 req.bmRequestType = requesttype; 665 req.bRequest = request; 666 USETW(req.wValue, value); 667 USETW(req.wIndex, index); 668 USETW(req.wLength, size); 669 670 if (uhe == NULL) { 671 return (-EINVAL); 672 } 673 type = (uhe->desc.bmAttributes & UE_XFERTYPE); 674 addr = (uhe->desc.bEndpointAddress & UE_ADDR); 675 676 if (type != UE_CONTROL) { 677 return (-EINVAL); 678 } 679 if (addr == 0) { 680 /* 681 * The FreeBSD USB stack supports standard control 682 * transfers on control endpoint zero: 683 */ 684 err = usbd_do_request_flags(dev, 685 NULL, &req, data, USB_SHORT_XFER_OK, 686 &actlen, timeout); 687 if (err) { 688 err = -EPIPE; 689 } else { 690 err = actlen; 691 } 692 return (err); 693 } 694 if (dev->flags.usb_mode != USB_MODE_HOST) { 695 /* not supported */ 696 return (-EINVAL); 697 } 698 err = usb_setup_endpoint(dev, uhe, 1 /* dummy */ ); 699 700 /* 701 * NOTE: we need to allocate real memory here so that we don't 702 * transfer data to/from the stack! 703 * 704 * 0xFFFF is a FreeBSD specific magic value. 705 */ 706 urb = usb_alloc_urb(0xFFFF, size); 707 708 urb->dev = dev; 709 urb->endpoint = uhe; 710 711 memcpy(urb->setup_packet, &req, sizeof(req)); 712 713 if (size && (!(req.bmRequestType & UT_READ))) { 714 /* move the data to a real buffer */ 715 memcpy(USB_ADD_BYTES(urb->setup_packet, sizeof(req)), 716 data, size); 717 } 718 err = usb_start_wait_urb(urb, timeout, &actlen); 719 720 if (req.bmRequestType & UT_READ) { 721 if (actlen) { 722 bcopy(USB_ADD_BYTES(urb->setup_packet, 723 sizeof(req)), data, actlen); 724 } 725 } 726 usb_free_urb(urb); 727 728 if (err == 0) { 729 err = actlen; 730 } 731 return (err); 732 } 733 734 /*------------------------------------------------------------------------* 735 * usb_set_interface 736 * 737 * The following function will select which alternate setting of an 738 * USB interface you plan to use. By default alternate setting with 739 * index zero is selected. Note that "iface_no" is not the interface 740 * index, but rather the value of "bInterfaceNumber". 741 *------------------------------------------------------------------------*/ 742 int 743 usb_set_interface(struct usb_device *dev, uint8_t iface_no, uint8_t alt_index) 744 { 745 struct usb_interface *p_ui = usb_ifnum_to_if(dev, iface_no); 746 int err; 747 748 if (p_ui == NULL) 749 return (-EINVAL); 750 if (alt_index >= p_ui->num_altsetting) 751 return (-EINVAL); 752 usb_linux_cleanup_interface(dev, p_ui); 753 err = -usbd_set_alt_interface_index(dev, 754 p_ui->bsd_iface_index, alt_index); 755 if (err == 0) { 756 p_ui->cur_altsetting = p_ui->altsetting + alt_index; 757 } 758 return (err); 759 } 760 761 /*------------------------------------------------------------------------* 762 * usb_setup_endpoint 763 * 764 * The following function is an extension to the Linux USB API that 765 * allows you to set a maximum buffer size for a given USB endpoint. 766 * The maximum buffer size is per URB. If you don't call this function 767 * to set a maximum buffer size, the endpoint will not be functional. 768 * Note that for isochronous endpoints the maximum buffer size must be 769 * a non-zero dummy, hence this function will base the maximum buffer 770 * size on "wMaxPacketSize". 771 *------------------------------------------------------------------------*/ 772 int 773 usb_setup_endpoint(struct usb_device *dev, 774 struct usb_host_endpoint *uhe, usb_size_t bufsize) 775 { 776 struct usb_config cfg[2]; 777 uint8_t type = uhe->desc.bmAttributes & UE_XFERTYPE; 778 uint8_t addr = uhe->desc.bEndpointAddress; 779 780 if (uhe->fbsd_buf_size == bufsize) { 781 /* optimize */ 782 return (0); 783 } 784 usbd_transfer_unsetup(uhe->bsd_xfer, 2); 785 786 uhe->fbsd_buf_size = bufsize; 787 788 if (bufsize == 0) { 789 return (0); 790 } 791 memset(cfg, 0, sizeof(cfg)); 792 793 if (type == UE_ISOCHRONOUS) { 794 /* 795 * Isochronous transfers are special in that they don't fit 796 * into the BULK/INTR/CONTROL transfer model. 797 */ 798 799 cfg[0].type = type; 800 cfg[0].endpoint = addr & UE_ADDR; 801 cfg[0].direction = addr & (UE_DIR_OUT | UE_DIR_IN); 802 cfg[0].callback = &usb_linux_isoc_callback; 803 cfg[0].bufsize = 0; /* use wMaxPacketSize */ 804 cfg[0].frames = usb_max_isoc_frames(dev); 805 cfg[0].flags.proxy_buffer = 1; 806 #if 0 807 /* 808 * The Linux USB API allows non back-to-back 809 * isochronous frames which we do not support. If the 810 * isochronous frames are not back-to-back we need to 811 * do a copy, and then we need a buffer for 812 * that. Enable this at your own risk. 813 */ 814 cfg[0].flags.ext_buffer = 1; 815 #endif 816 cfg[0].flags.short_xfer_ok = 1; 817 818 bcopy(cfg, cfg + 1, sizeof(*cfg)); 819 820 /* Allocate and setup two generic FreeBSD USB transfers */ 821 822 if (usbd_transfer_setup(dev, &uhe->bsd_iface_index, 823 uhe->bsd_xfer, cfg, 2, uhe, &Giant)) { 824 return (-EINVAL); 825 } 826 } else { 827 if (bufsize > (1 << 22)) { 828 /* limit buffer size */ 829 bufsize = (1 << 22); 830 } 831 /* Allocate and setup one generic FreeBSD USB transfer */ 832 833 cfg[0].type = type; 834 cfg[0].endpoint = addr & UE_ADDR; 835 cfg[0].direction = addr & (UE_DIR_OUT | UE_DIR_IN); 836 cfg[0].callback = &usb_linux_non_isoc_callback; 837 cfg[0].bufsize = bufsize; 838 cfg[0].flags.ext_buffer = 1; /* enable zero-copy */ 839 cfg[0].flags.proxy_buffer = 1; 840 cfg[0].flags.short_xfer_ok = 1; 841 842 if (usbd_transfer_setup(dev, &uhe->bsd_iface_index, 843 uhe->bsd_xfer, cfg, 1, uhe, &Giant)) { 844 return (-EINVAL); 845 } 846 } 847 return (0); 848 } 849 850 /*------------------------------------------------------------------------* 851 * usb_linux_create_usb_device 852 * 853 * The following function is used to build up a per USB device 854 * structure tree, that mimics the Linux one. The root structure 855 * is returned by this function. 856 *------------------------------------------------------------------------*/ 857 static int 858 usb_linux_create_usb_device(struct usb_device *udev, device_t dev) 859 { 860 struct usb_config_descriptor *cd = usbd_get_config_descriptor(udev); 861 struct usb_descriptor *desc; 862 struct usb_interface_descriptor *id; 863 struct usb_endpoint_descriptor *ed; 864 struct usb_interface *p_ui = NULL; 865 struct usb_host_interface *p_uhi = NULL; 866 struct usb_host_endpoint *p_uhe = NULL; 867 usb_size_t size; 868 uint16_t niface_total; 869 uint16_t nedesc; 870 uint16_t iface_no_curr; 871 uint16_t iface_index; 872 uint8_t pass; 873 uint8_t iface_no; 874 875 /* 876 * We do two passes. One pass for computing necessary memory size 877 * and one pass to initialize all the allocated memory structures. 878 */ 879 for (pass = 0; pass < 2; pass++) { 880 iface_no_curr = 0xFFFF; 881 niface_total = 0; 882 iface_index = 0; 883 nedesc = 0; 884 desc = NULL; 885 886 /* 887 * Iterate over all the USB descriptors. Use the USB config 888 * descriptor pointer provided by the FreeBSD USB stack. 889 */ 890 while ((desc = usb_desc_foreach(cd, desc))) { 891 /* 892 * Build up a tree according to the descriptors we 893 * find: 894 */ 895 switch (desc->bDescriptorType) { 896 case UDESC_DEVICE: 897 break; 898 899 case UDESC_ENDPOINT: 900 ed = (void *)desc; 901 if ((ed->bLength < sizeof(*ed)) || 902 (iface_index == 0)) 903 break; 904 if (p_uhe) { 905 bcopy(ed, &p_uhe->desc, sizeof(p_uhe->desc)); 906 p_uhe->bsd_iface_index = iface_index - 1; 907 TAILQ_INIT(&p_uhe->bsd_urb_list); 908 p_uhe++; 909 } 910 if (p_uhi) { 911 (p_uhi - 1)->desc.bNumEndpoints++; 912 } 913 nedesc++; 914 break; 915 916 case UDESC_INTERFACE: 917 id = (void *)desc; 918 if (id->bLength < sizeof(*id)) 919 break; 920 if (p_uhi) { 921 bcopy(id, &p_uhi->desc, sizeof(p_uhi->desc)); 922 p_uhi->desc.bNumEndpoints = 0; 923 p_uhi->endpoint = p_uhe; 924 p_uhi->string = ""; 925 p_uhi->bsd_iface_index = iface_index; 926 p_uhi++; 927 } 928 iface_no = id->bInterfaceNumber; 929 niface_total++; 930 if (iface_no_curr != iface_no) { 931 if (p_ui) { 932 p_ui->altsetting = p_uhi - 1; 933 p_ui->cur_altsetting = p_uhi - 1; 934 p_ui->bsd_iface_index = iface_index; 935 p_ui->linux_udev = udev; 936 p_ui++; 937 } 938 iface_no_curr = iface_no; 939 iface_index++; 940 } 941 break; 942 943 default: 944 break; 945 } 946 } 947 948 if (pass == 0) { 949 size = (sizeof(*p_uhe) * nedesc) + 950 (sizeof(*p_ui) * iface_index) + 951 (sizeof(*p_uhi) * niface_total); 952 953 p_uhe = malloc(size, M_USBDEV, M_WAITOK | M_ZERO); 954 p_ui = (void *)(p_uhe + nedesc); 955 p_uhi = (void *)(p_ui + iface_index); 956 957 udev->linux_iface_start = p_ui; 958 udev->linux_iface_end = p_ui + iface_index; 959 udev->linux_endpoint_start = p_uhe; 960 udev->linux_endpoint_end = p_uhe + nedesc; 961 udev->devnum = device_get_unit(dev); 962 bcopy(&udev->ddesc, &udev->descriptor, 963 sizeof(udev->descriptor)); 964 bcopy(udev->ctrl_ep.edesc, &udev->ep0.desc, 965 sizeof(udev->ep0.desc)); 966 } 967 } 968 return (0); 969 } 970 971 /*------------------------------------------------------------------------* 972 * usb_alloc_urb 973 * 974 * This function should always be used when you allocate an URB for 975 * use with the USB Linux stack. In case of an isochronous transfer 976 * you must specifiy the maximum number of "iso_packets" which you 977 * plan to transfer per URB. This function is always blocking, and 978 * "mem_flags" are not regarded like on Linux. 979 *------------------------------------------------------------------------*/ 980 struct urb * 981 usb_alloc_urb(uint16_t iso_packets, uint16_t mem_flags) 982 { 983 struct urb *urb; 984 usb_size_t size; 985 986 if (iso_packets == 0xFFFF) { 987 /* 988 * FreeBSD specific magic value to ask for control transfer 989 * memory allocation: 990 */ 991 size = sizeof(*urb) + sizeof(struct usb_device_request) + mem_flags; 992 } else { 993 size = sizeof(*urb) + (iso_packets * sizeof(urb->iso_frame_desc[0])); 994 } 995 996 urb = malloc(size, M_USBDEV, M_WAITOK | M_ZERO); 997 998 cv_init(&urb->cv_wait, "URBWAIT"); 999 if (iso_packets == 0xFFFF) { 1000 urb->setup_packet = (void *)(urb + 1); 1001 urb->transfer_buffer = (void *)(urb->setup_packet + 1002 sizeof(struct usb_device_request)); 1003 } else { 1004 urb->number_of_packets = iso_packets; 1005 } 1006 return (urb); 1007 } 1008 1009 /*------------------------------------------------------------------------* 1010 * usb_find_host_endpoint 1011 * 1012 * The following function will return the Linux USB host endpoint 1013 * structure that matches the given endpoint type and endpoint 1014 * value. If no match is found, NULL is returned. This function is not 1015 * part of the Linux USB API and is only used internally. 1016 *------------------------------------------------------------------------*/ 1017 struct usb_host_endpoint * 1018 usb_find_host_endpoint(struct usb_device *dev, uint8_t type, uint8_t ep) 1019 { 1020 struct usb_host_endpoint *uhe; 1021 struct usb_host_endpoint *uhe_end; 1022 struct usb_host_interface *uhi; 1023 struct usb_interface *ui; 1024 uint8_t ea; 1025 uint8_t at; 1026 uint8_t mask; 1027 1028 if (dev == NULL) { 1029 return (NULL); 1030 } 1031 if (type == UE_CONTROL) { 1032 mask = UE_ADDR; 1033 } else { 1034 mask = (UE_DIR_IN | UE_DIR_OUT | UE_ADDR); 1035 } 1036 1037 ep &= mask; 1038 1039 /* 1040 * Iterate over all the interfaces searching the selected alternate 1041 * setting only, and all belonging endpoints. 1042 */ 1043 for (ui = dev->linux_iface_start; 1044 ui != dev->linux_iface_end; 1045 ui++) { 1046 uhi = ui->cur_altsetting; 1047 if (uhi) { 1048 uhe_end = uhi->endpoint + uhi->desc.bNumEndpoints; 1049 for (uhe = uhi->endpoint; 1050 uhe != uhe_end; 1051 uhe++) { 1052 ea = uhe->desc.bEndpointAddress; 1053 at = uhe->desc.bmAttributes; 1054 1055 if (((ea & mask) == ep) && 1056 ((at & UE_XFERTYPE) == type)) { 1057 return (uhe); 1058 } 1059 } 1060 } 1061 } 1062 1063 if ((type == UE_CONTROL) && ((ep & UE_ADDR) == 0)) { 1064 return (&dev->ep0); 1065 } 1066 return (NULL); 1067 } 1068 1069 /*------------------------------------------------------------------------* 1070 * usb_altnum_to_altsetting 1071 * 1072 * The following function returns a pointer to an alternate setting by 1073 * index given a "usb_interface" pointer. If the alternate setting by 1074 * index does not exist, NULL is returned. And alternate setting is a 1075 * variant of an interface, but usually with slightly different 1076 * characteristics. 1077 *------------------------------------------------------------------------*/ 1078 struct usb_host_interface * 1079 usb_altnum_to_altsetting(const struct usb_interface *intf, uint8_t alt_index) 1080 { 1081 if (alt_index >= intf->num_altsetting) { 1082 return (NULL); 1083 } 1084 return (intf->altsetting + alt_index); 1085 } 1086 1087 /*------------------------------------------------------------------------* 1088 * usb_ifnum_to_if 1089 * 1090 * The following function searches up an USB interface by 1091 * "bInterfaceNumber". If no match is found, NULL is returned. 1092 *------------------------------------------------------------------------*/ 1093 struct usb_interface * 1094 usb_ifnum_to_if(struct usb_device *dev, uint8_t iface_no) 1095 { 1096 struct usb_interface *p_ui; 1097 1098 for (p_ui = dev->linux_iface_start; 1099 p_ui != dev->linux_iface_end; 1100 p_ui++) { 1101 if ((p_ui->num_altsetting > 0) && 1102 (p_ui->altsetting->desc.bInterfaceNumber == iface_no)) { 1103 return (p_ui); 1104 } 1105 } 1106 return (NULL); 1107 } 1108 1109 /*------------------------------------------------------------------------* 1110 * usb_buffer_alloc 1111 *------------------------------------------------------------------------*/ 1112 void * 1113 usb_buffer_alloc(struct usb_device *dev, usb_size_t size, uint16_t mem_flags, uint8_t *dma_addr) 1114 { 1115 return (malloc(size, M_USBDEV, M_WAITOK | M_ZERO)); 1116 } 1117 1118 /*------------------------------------------------------------------------* 1119 * usbd_get_intfdata 1120 *------------------------------------------------------------------------*/ 1121 void * 1122 usbd_get_intfdata(struct usb_interface *intf) 1123 { 1124 return (intf->bsd_priv_sc); 1125 } 1126 1127 /*------------------------------------------------------------------------* 1128 * usb_linux_register 1129 * 1130 * The following function is used by the "USB_DRIVER_EXPORT()" macro, 1131 * and is used to register a Linux USB driver, so that its 1132 * "usb_device_id" structures gets searched a probe time. This 1133 * function is not part of the Linux USB API, and is for internal use 1134 * only. 1135 *------------------------------------------------------------------------*/ 1136 void 1137 usb_linux_register(void *arg) 1138 { 1139 struct usb_driver *drv = arg; 1140 1141 mtx_lock(&Giant); 1142 LIST_INSERT_HEAD(&usb_linux_driver_list, drv, linux_driver_list); 1143 mtx_unlock(&Giant); 1144 1145 usb_needs_explore_all(); 1146 } 1147 1148 /*------------------------------------------------------------------------* 1149 * usb_linux_deregister 1150 * 1151 * The following function is used by the "USB_DRIVER_EXPORT()" macro, 1152 * and is used to deregister a Linux USB driver. This function will 1153 * ensure that all driver instances belonging to the Linux USB device 1154 * driver in question, gets detached before the driver is 1155 * unloaded. This function is not part of the Linux USB API, and is 1156 * for internal use only. 1157 *------------------------------------------------------------------------*/ 1158 void 1159 usb_linux_deregister(void *arg) 1160 { 1161 struct usb_driver *drv = arg; 1162 struct usb_linux_softc *sc; 1163 1164 repeat: 1165 mtx_lock(&Giant); 1166 LIST_FOREACH(sc, &usb_linux_attached_list, sc_attached_list) { 1167 if (sc->sc_udrv == drv) { 1168 mtx_unlock(&Giant); 1169 bus_topo_lock(); 1170 device_detach(sc->sc_fbsd_dev); 1171 bus_topo_unlock(); 1172 goto repeat; 1173 } 1174 } 1175 LIST_REMOVE(drv, linux_driver_list); 1176 mtx_unlock(&Giant); 1177 } 1178 1179 /*------------------------------------------------------------------------* 1180 * usb_linux_free_device 1181 * 1182 * The following function is only used by the FreeBSD USB stack, to 1183 * cleanup and free memory after that a Linux USB device was attached. 1184 *------------------------------------------------------------------------*/ 1185 void 1186 usb_linux_free_device(struct usb_device *dev) 1187 { 1188 struct usb_host_endpoint *uhe; 1189 struct usb_host_endpoint *uhe_end; 1190 1191 uhe = dev->linux_endpoint_start; 1192 uhe_end = dev->linux_endpoint_end; 1193 while (uhe != uhe_end) { 1194 usb_setup_endpoint(dev, uhe, 0); 1195 uhe++; 1196 } 1197 usb_setup_endpoint(dev, &dev->ep0, 0); 1198 free(dev->linux_endpoint_start, M_USBDEV); 1199 } 1200 1201 /*------------------------------------------------------------------------* 1202 * usb_buffer_free 1203 *------------------------------------------------------------------------*/ 1204 void 1205 usb_buffer_free(struct usb_device *dev, usb_size_t size, 1206 void *addr, uint8_t dma_addr) 1207 { 1208 free(addr, M_USBDEV); 1209 } 1210 1211 /*------------------------------------------------------------------------* 1212 * usb_free_urb 1213 *------------------------------------------------------------------------*/ 1214 void 1215 usb_free_urb(struct urb *urb) 1216 { 1217 if (urb == NULL) { 1218 return; 1219 } 1220 /* make sure that the current URB is not active */ 1221 usb_kill_urb(urb); 1222 1223 /* destroy condition variable */ 1224 cv_destroy(&urb->cv_wait); 1225 1226 /* just free it */ 1227 free(urb, M_USBDEV); 1228 } 1229 1230 /*------------------------------------------------------------------------* 1231 * usb_init_urb 1232 * 1233 * The following function can be used to initialize a custom URB. It 1234 * is not recommended to use this function. Use "usb_alloc_urb()" 1235 * instead. 1236 *------------------------------------------------------------------------*/ 1237 void 1238 usb_init_urb(struct urb *urb) 1239 { 1240 if (urb == NULL) { 1241 return; 1242 } 1243 memset(urb, 0, sizeof(*urb)); 1244 } 1245 1246 /*------------------------------------------------------------------------* 1247 * usb_kill_urb 1248 *------------------------------------------------------------------------*/ 1249 void 1250 usb_kill_urb(struct urb *urb) 1251 { 1252 usb_unlink_urb_sub(urb, 1); 1253 } 1254 1255 /*------------------------------------------------------------------------* 1256 * usb_set_intfdata 1257 * 1258 * The following function sets the per Linux USB interface private 1259 * data pointer. It is used by most Linux USB device drivers. 1260 *------------------------------------------------------------------------*/ 1261 void 1262 usb_set_intfdata(struct usb_interface *intf, void *data) 1263 { 1264 intf->bsd_priv_sc = data; 1265 } 1266 1267 /*------------------------------------------------------------------------* 1268 * usb_linux_cleanup_interface 1269 * 1270 * The following function will release all FreeBSD USB transfers 1271 * associated with a Linux USB interface. It is for internal use only. 1272 *------------------------------------------------------------------------*/ 1273 static void 1274 usb_linux_cleanup_interface(struct usb_device *dev, struct usb_interface *iface) 1275 { 1276 struct usb_host_interface *uhi; 1277 struct usb_host_interface *uhi_end; 1278 struct usb_host_endpoint *uhe; 1279 struct usb_host_endpoint *uhe_end; 1280 1281 uhi = iface->altsetting; 1282 uhi_end = iface->altsetting + iface->num_altsetting; 1283 while (uhi != uhi_end) { 1284 uhe = uhi->endpoint; 1285 uhe_end = uhi->endpoint + uhi->desc.bNumEndpoints; 1286 while (uhe != uhe_end) { 1287 usb_setup_endpoint(dev, uhe, 0); 1288 uhe++; 1289 } 1290 uhi++; 1291 } 1292 } 1293 1294 /*------------------------------------------------------------------------* 1295 * usb_linux_wait_complete 1296 * 1297 * The following function is used by "usb_start_wait_urb()" to wake it 1298 * up, when an USB transfer has finished. 1299 *------------------------------------------------------------------------*/ 1300 static void 1301 usb_linux_wait_complete(struct urb *urb) 1302 { 1303 if (urb->transfer_flags & URB_IS_SLEEPING) { 1304 cv_signal(&urb->cv_wait); 1305 } 1306 urb->transfer_flags &= ~URB_WAIT_WAKEUP; 1307 } 1308 1309 /*------------------------------------------------------------------------* 1310 * usb_linux_complete 1311 *------------------------------------------------------------------------*/ 1312 static void 1313 usb_linux_complete(struct usb_xfer *xfer) 1314 { 1315 struct urb *urb; 1316 1317 urb = usbd_xfer_get_priv(xfer); 1318 usbd_xfer_set_priv(xfer, NULL); 1319 if (urb->complete) { 1320 (urb->complete) (urb); 1321 } 1322 } 1323 1324 /*------------------------------------------------------------------------* 1325 * usb_linux_isoc_callback 1326 * 1327 * The following is the FreeBSD isochronous USB callback. Isochronous 1328 * frames are USB packets transferred 1000 or 8000 times per second, 1329 * depending on whether a full- or high- speed USB transfer is 1330 * used. 1331 *------------------------------------------------------------------------*/ 1332 static void 1333 usb_linux_isoc_callback(struct usb_xfer *xfer, usb_error_t error) 1334 { 1335 usb_frlength_t max_frame = xfer->max_frame_size; 1336 usb_frlength_t offset; 1337 usb_frcount_t x; 1338 struct urb *urb = usbd_xfer_get_priv(xfer); 1339 struct usb_host_endpoint *uhe = usbd_xfer_softc(xfer); 1340 struct usb_iso_packet_descriptor *uipd; 1341 1342 DPRINTF("\n"); 1343 1344 switch (USB_GET_STATE(xfer)) { 1345 case USB_ST_TRANSFERRED: 1346 1347 if (urb->bsd_isread) { 1348 /* copy in data with regard to the URB */ 1349 1350 offset = 0; 1351 1352 for (x = 0; x < urb->number_of_packets; x++) { 1353 uipd = urb->iso_frame_desc + x; 1354 if (uipd->length > xfer->frlengths[x]) { 1355 if (urb->transfer_flags & URB_SHORT_NOT_OK) { 1356 /* XXX should be EREMOTEIO */ 1357 uipd->status = -EPIPE; 1358 } else { 1359 uipd->status = 0; 1360 } 1361 } else { 1362 uipd->status = 0; 1363 } 1364 uipd->actual_length = xfer->frlengths[x]; 1365 if (!xfer->flags.ext_buffer) { 1366 usbd_copy_out(xfer->frbuffers, offset, 1367 USB_ADD_BYTES(urb->transfer_buffer, 1368 uipd->offset), uipd->actual_length); 1369 } 1370 offset += max_frame; 1371 } 1372 } else { 1373 for (x = 0; x < urb->number_of_packets; x++) { 1374 uipd = urb->iso_frame_desc + x; 1375 uipd->actual_length = xfer->frlengths[x]; 1376 uipd->status = 0; 1377 } 1378 } 1379 1380 urb->actual_length = xfer->actlen; 1381 1382 /* check for short transfer */ 1383 if (xfer->actlen < xfer->sumlen) { 1384 /* short transfer */ 1385 if (urb->transfer_flags & URB_SHORT_NOT_OK) { 1386 /* XXX should be EREMOTEIO */ 1387 urb->status = -EPIPE; 1388 } else { 1389 urb->status = 0; 1390 } 1391 } else { 1392 /* success */ 1393 urb->status = 0; 1394 } 1395 1396 /* call callback */ 1397 usb_linux_complete(xfer); 1398 1399 case USB_ST_SETUP: 1400 tr_setup: 1401 1402 if (xfer->priv_fifo == NULL) { 1403 /* get next transfer */ 1404 urb = TAILQ_FIRST(&uhe->bsd_urb_list); 1405 if (urb == NULL) { 1406 /* nothing to do */ 1407 return; 1408 } 1409 TAILQ_REMOVE(&uhe->bsd_urb_list, urb, bsd_urb_list); 1410 urb->bsd_urb_list.tqe_prev = NULL; 1411 1412 x = xfer->max_frame_count; 1413 if (urb->number_of_packets > x) { 1414 /* XXX simply truncate the transfer */ 1415 urb->number_of_packets = x; 1416 } 1417 } else { 1418 DPRINTF("Already got a transfer\n"); 1419 1420 /* already got a transfer (should not happen) */ 1421 urb = usbd_xfer_get_priv(xfer); 1422 } 1423 1424 urb->bsd_isread = (uhe->desc.bEndpointAddress & UE_DIR_IN) ? 1 : 0; 1425 1426 if (xfer->flags.ext_buffer) { 1427 /* set virtual address to load */ 1428 usbd_xfer_set_frame_data(xfer, 0, urb->transfer_buffer, 0); 1429 } 1430 if (!(urb->bsd_isread)) { 1431 /* copy out data with regard to the URB */ 1432 1433 offset = 0; 1434 1435 for (x = 0; x < urb->number_of_packets; x++) { 1436 uipd = urb->iso_frame_desc + x; 1437 usbd_xfer_set_frame_len(xfer, x, uipd->length); 1438 if (!xfer->flags.ext_buffer) { 1439 usbd_copy_in(xfer->frbuffers, offset, 1440 USB_ADD_BYTES(urb->transfer_buffer, 1441 uipd->offset), uipd->length); 1442 } 1443 offset += uipd->length; 1444 } 1445 } else { 1446 /* 1447 * compute the transfer length into the "offset" 1448 * variable 1449 */ 1450 1451 offset = urb->number_of_packets * max_frame; 1452 1453 /* setup "frlengths" array */ 1454 1455 for (x = 0; x < urb->number_of_packets; x++) { 1456 uipd = urb->iso_frame_desc + x; 1457 usbd_xfer_set_frame_len(xfer, x, max_frame); 1458 } 1459 } 1460 usbd_xfer_set_priv(xfer, urb); 1461 xfer->flags.force_short_xfer = 0; 1462 xfer->timeout = urb->timeout; 1463 xfer->nframes = urb->number_of_packets; 1464 usbd_transfer_submit(xfer); 1465 return; 1466 1467 default: /* Error */ 1468 if (xfer->error == USB_ERR_CANCELLED) { 1469 urb->status = -ECONNRESET; 1470 } else { 1471 urb->status = -EPIPE; /* stalled */ 1472 } 1473 1474 /* Set zero for "actual_length" */ 1475 urb->actual_length = 0; 1476 1477 /* Set zero for "actual_length" */ 1478 for (x = 0; x < urb->number_of_packets; x++) { 1479 urb->iso_frame_desc[x].actual_length = 0; 1480 urb->iso_frame_desc[x].status = urb->status; 1481 } 1482 1483 /* call callback */ 1484 usb_linux_complete(xfer); 1485 1486 if (xfer->error == USB_ERR_CANCELLED) { 1487 /* we need to return in this case */ 1488 return; 1489 } 1490 goto tr_setup; 1491 } 1492 } 1493 1494 /*------------------------------------------------------------------------* 1495 * usb_linux_non_isoc_callback 1496 * 1497 * The following is the FreeBSD BULK/INTERRUPT and CONTROL USB 1498 * callback. It dequeues Linux USB stack compatible URB's, transforms 1499 * the URB fields into a FreeBSD USB transfer, and defragments the USB 1500 * transfer as required. When the transfer is complete the "complete" 1501 * callback is called. 1502 *------------------------------------------------------------------------*/ 1503 static void 1504 usb_linux_non_isoc_callback(struct usb_xfer *xfer, usb_error_t error) 1505 { 1506 enum { 1507 REQ_SIZE = sizeof(struct usb_device_request) 1508 }; 1509 struct urb *urb = usbd_xfer_get_priv(xfer); 1510 struct usb_host_endpoint *uhe = usbd_xfer_softc(xfer); 1511 uint8_t *ptr; 1512 usb_frlength_t max_bulk = usbd_xfer_max_len(xfer); 1513 uint8_t data_frame = xfer->flags_int.control_xfr ? 1 : 0; 1514 1515 DPRINTF("\n"); 1516 1517 switch (USB_GET_STATE(xfer)) { 1518 case USB_ST_TRANSFERRED: 1519 1520 if (xfer->flags_int.control_xfr) { 1521 /* don't transfer the setup packet again: */ 1522 1523 usbd_xfer_set_frame_len(xfer, 0, 0); 1524 } 1525 if (urb->bsd_isread && (!xfer->flags.ext_buffer)) { 1526 /* copy in data with regard to the URB */ 1527 usbd_copy_out(xfer->frbuffers + data_frame, 0, 1528 urb->bsd_data_ptr, xfer->frlengths[data_frame]); 1529 } 1530 urb->bsd_length_rem -= xfer->frlengths[data_frame]; 1531 urb->bsd_data_ptr += xfer->frlengths[data_frame]; 1532 urb->actual_length += xfer->frlengths[data_frame]; 1533 1534 /* check for short transfer */ 1535 if (xfer->actlen < xfer->sumlen) { 1536 urb->bsd_length_rem = 0; 1537 1538 /* short transfer */ 1539 if (urb->transfer_flags & URB_SHORT_NOT_OK) { 1540 urb->status = -EPIPE; 1541 } else { 1542 urb->status = 0; 1543 } 1544 } else { 1545 /* check remainder */ 1546 if (urb->bsd_length_rem > 0) { 1547 goto setup_bulk; 1548 } 1549 /* success */ 1550 urb->status = 0; 1551 } 1552 1553 /* call callback */ 1554 usb_linux_complete(xfer); 1555 1556 case USB_ST_SETUP: 1557 tr_setup: 1558 /* get next transfer */ 1559 urb = TAILQ_FIRST(&uhe->bsd_urb_list); 1560 if (urb == NULL) { 1561 /* nothing to do */ 1562 return; 1563 } 1564 TAILQ_REMOVE(&uhe->bsd_urb_list, urb, bsd_urb_list); 1565 urb->bsd_urb_list.tqe_prev = NULL; 1566 1567 usbd_xfer_set_priv(xfer, urb); 1568 xfer->flags.force_short_xfer = 0; 1569 xfer->timeout = urb->timeout; 1570 1571 if (xfer->flags_int.control_xfr) { 1572 /* 1573 * USB control transfers need special handling. 1574 * First copy in the header, then copy in data! 1575 */ 1576 if (!xfer->flags.ext_buffer) { 1577 usbd_copy_in(xfer->frbuffers, 0, 1578 urb->setup_packet, REQ_SIZE); 1579 usbd_xfer_set_frame_len(xfer, 0, REQ_SIZE); 1580 } else { 1581 /* set virtual address to load */ 1582 usbd_xfer_set_frame_data(xfer, 0, 1583 urb->setup_packet, REQ_SIZE); 1584 } 1585 1586 ptr = urb->setup_packet; 1587 1588 /* setup data transfer direction and length */ 1589 urb->bsd_isread = (ptr[0] & UT_READ) ? 1 : 0; 1590 urb->bsd_length_rem = ptr[6] | (ptr[7] << 8); 1591 1592 } else { 1593 /* setup data transfer direction */ 1594 1595 urb->bsd_length_rem = urb->transfer_buffer_length; 1596 urb->bsd_isread = (uhe->desc.bEndpointAddress & 1597 UE_DIR_IN) ? 1 : 0; 1598 } 1599 1600 urb->bsd_data_ptr = urb->transfer_buffer; 1601 urb->actual_length = 0; 1602 1603 setup_bulk: 1604 if (max_bulk > urb->bsd_length_rem) { 1605 max_bulk = urb->bsd_length_rem; 1606 } 1607 /* check if we need to force a short transfer */ 1608 1609 if ((max_bulk == urb->bsd_length_rem) && 1610 (urb->transfer_flags & URB_ZERO_PACKET) && 1611 (!xfer->flags_int.control_xfr)) { 1612 xfer->flags.force_short_xfer = 1; 1613 } 1614 /* check if we need to copy in data */ 1615 1616 if (xfer->flags.ext_buffer) { 1617 /* set virtual address to load */ 1618 usbd_xfer_set_frame_data(xfer, data_frame, 1619 urb->bsd_data_ptr, max_bulk); 1620 } else if (!urb->bsd_isread) { 1621 /* copy out data with regard to the URB */ 1622 usbd_copy_in(xfer->frbuffers + data_frame, 0, 1623 urb->bsd_data_ptr, max_bulk); 1624 usbd_xfer_set_frame_len(xfer, data_frame, max_bulk); 1625 } 1626 if (xfer->flags_int.control_xfr) { 1627 if (max_bulk > 0) { 1628 xfer->nframes = 2; 1629 } else { 1630 xfer->nframes = 1; 1631 } 1632 } else { 1633 xfer->nframes = 1; 1634 } 1635 usbd_transfer_submit(xfer); 1636 return; 1637 1638 default: 1639 if (xfer->error == USB_ERR_CANCELLED) { 1640 urb->status = -ECONNRESET; 1641 } else { 1642 urb->status = -EPIPE; 1643 } 1644 1645 /* Set zero for "actual_length" */ 1646 urb->actual_length = 0; 1647 1648 /* call callback */ 1649 usb_linux_complete(xfer); 1650 1651 if (xfer->error == USB_ERR_CANCELLED) { 1652 /* we need to return in this case */ 1653 return; 1654 } 1655 goto tr_setup; 1656 } 1657 } 1658 1659 /*------------------------------------------------------------------------* 1660 * usb_fill_bulk_urb 1661 *------------------------------------------------------------------------*/ 1662 void 1663 usb_fill_bulk_urb(struct urb *urb, struct usb_device *udev, 1664 struct usb_host_endpoint *uhe, void *buf, 1665 int length, usb_complete_t callback, void *arg) 1666 { 1667 urb->dev = udev; 1668 urb->endpoint = uhe; 1669 urb->transfer_buffer = buf; 1670 urb->transfer_buffer_length = length; 1671 urb->complete = callback; 1672 urb->context = arg; 1673 } 1674 1675 /*------------------------------------------------------------------------* 1676 * usb_bulk_msg 1677 * 1678 * NOTE: This function can also be used for interrupt endpoints! 1679 * 1680 * Return values: 1681 * 0: Success 1682 * Else: Failure 1683 *------------------------------------------------------------------------*/ 1684 int 1685 usb_bulk_msg(struct usb_device *udev, struct usb_host_endpoint *uhe, 1686 void *data, int len, uint16_t *pactlen, usb_timeout_t timeout) 1687 { 1688 struct urb *urb; 1689 int err; 1690 1691 if (uhe == NULL) 1692 return (-EINVAL); 1693 if (len < 0) 1694 return (-EINVAL); 1695 1696 err = usb_setup_endpoint(udev, uhe, 4096 /* bytes */); 1697 if (err) 1698 return (err); 1699 1700 urb = usb_alloc_urb(0, 0); 1701 1702 usb_fill_bulk_urb(urb, udev, uhe, data, len, 1703 usb_linux_wait_complete, NULL); 1704 1705 err = usb_start_wait_urb(urb, timeout, pactlen); 1706 1707 usb_free_urb(urb); 1708 1709 return (err); 1710 } 1711 MODULE_DEPEND(linuxkpi, usb, 1, 1, 1); 1712 1713 static void 1714 usb_linux_init(void *arg) 1715 { 1716 /* register our function */ 1717 usb_linux_free_device_p = &usb_linux_free_device; 1718 } 1719 SYSINIT(usb_linux_init, SI_SUB_LOCK, SI_ORDER_FIRST, usb_linux_init, NULL); 1720 SYSUNINIT(usb_linux_unload, SI_SUB_LOCK, SI_ORDER_ANY, usb_linux_unload, NULL); 1721