xref: /freebsd/sys/cam/scsi/scsi_sg.c (revision 90aac0d83bc9645f51ef0c2aeae6f9c0540bb031)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause
3  *
4  * Copyright (c) 2007 Scott Long
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions, and the following disclaimer,
12  *    without modification, immediately at the beginning of the file.
13  * 2. The name of the author may not be used to endorse or promote products
14  *    derived from this software without specific prior written permission.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
20  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26  * SUCH DAMAGE.
27  */
28 
29 /*
30  * scsi_sg peripheral driver.  This driver is meant to implement the Linux
31  * SG passthrough interface for SCSI.
32  */
33 
34 #include <sys/cdefs.h>
35 #include <sys/param.h>
36 #include <sys/systm.h>
37 #include <sys/kernel.h>
38 #include <sys/types.h>
39 #include <sys/bio.h>
40 #include <sys/malloc.h>
41 #include <sys/fcntl.h>
42 #include <sys/ioccom.h>
43 #include <sys/conf.h>
44 #include <sys/errno.h>
45 #include <sys/devicestat.h>
46 #include <sys/proc.h>
47 #include <sys/uio.h>
48 
49 #include <cam/cam.h>
50 #include <cam/cam_ccb.h>
51 #include <cam/cam_periph.h>
52 #include <cam/cam_queue.h>
53 #include <cam/cam_xpt_periph.h>
54 #include <cam/cam_debug.h>
55 #include <cam/cam_sim.h>
56 
57 #include <cam/scsi/scsi_all.h>
58 #include <cam/scsi/scsi_message.h>
59 #include <cam/scsi/scsi_sg.h>
60 
61 typedef enum {
62 	SG_FLAG_LOCKED		= 0x01,
63 	SG_FLAG_INVALID		= 0x02
64 } sg_flags;
65 
66 typedef enum {
67 	SG_STATE_NORMAL
68 } sg_state;
69 
70 typedef enum {
71 	SG_RDWR_FREE,
72 	SG_RDWR_INPROG,
73 	SG_RDWR_DONE
74 } sg_rdwr_state;
75 
76 typedef enum {
77 	SG_CCB_RDWR_IO
78 } sg_ccb_types;
79 
80 #define ccb_type	ppriv_field0
81 #define ccb_rdwr	ppriv_ptr1
82 
83 struct sg_rdwr {
84 	TAILQ_ENTRY(sg_rdwr)	rdwr_link;
85 	int			tag;
86 	int			state;
87 	int			buf_len;
88 	char			*buf;
89 	union ccb		*ccb;
90 	union {
91 		struct sg_header hdr;
92 		struct sg_io_hdr io_hdr;
93 	} hdr;
94 };
95 
96 struct sg_softc {
97 	sg_state		state;
98 	sg_flags		flags;
99 	int			open_count;
100 	u_int			maxio;
101 	struct devstat		*device_stats;
102 	TAILQ_HEAD(, sg_rdwr)	rdwr_done;
103 	struct cdev		*dev;
104 	int			sg_timeout;
105 	int			sg_user_timeout;
106 	uint8_t			pd_type;
107 };
108 
109 static d_open_t		sgopen;
110 static d_close_t	sgclose;
111 static d_ioctl_t	sgioctl;
112 static d_write_t	sgwrite;
113 static d_read_t		sgread;
114 
115 static periph_init_t	sginit;
116 static periph_ctor_t	sgregister;
117 static periph_oninv_t	sgoninvalidate;
118 static periph_dtor_t	sgcleanup;
119 static void		sgasync(void *callback_arg, uint32_t code,
120 				struct cam_path *path, void *arg);
121 static void		sgdone(struct cam_periph *periph, union ccb *done_ccb);
122 static int		sgsendccb(struct cam_periph *periph, union ccb *ccb);
123 static int		sgsendrdwr(struct cam_periph *periph, union ccb *ccb);
124 static int		sgerror(union ccb *ccb, uint32_t cam_flags,
125 				uint32_t sense_flags);
126 static void		sg_scsiio_status(struct ccb_scsiio *csio,
127 					 u_short *hoststat, u_short *drvstat);
128 
129 static int		scsi_group_len(u_char cmd);
130 
131 static struct periph_driver sgdriver =
132 {
133 	sginit, "sg",
134 	TAILQ_HEAD_INITIALIZER(sgdriver.units), /* gen */ 0
135 };
136 PERIPHDRIVER_DECLARE(sg, sgdriver);
137 
138 static struct cdevsw sg_cdevsw = {
139 	.d_version =	D_VERSION,
140 	.d_flags =	D_TRACKCLOSE,
141 	.d_open =	sgopen,
142 	.d_close =	sgclose,
143 	.d_ioctl =	sgioctl,
144 	.d_write =	sgwrite,
145 	.d_read =	sgread,
146 	.d_name =	"sg",
147 };
148 
149 static int sg_version = 30125;
150 
151 static void
152 sginit(void)
153 {
154 	cam_status status;
155 
156 	/*
157 	 * Install a global async callback.  This callback will receive aync
158 	 * callbacks like "new device found".
159 	 */
160 	status = xpt_register_async(AC_FOUND_DEVICE, sgasync, NULL, NULL);
161 
162 	if (status != CAM_REQ_CMP) {
163 		printf("sg: Failed to attach master async callbac "
164 			"due to status 0x%x!\n", status);
165 	}
166 }
167 
168 static void
169 sgdevgonecb(void *arg)
170 {
171 	struct cam_periph *periph;
172 	struct sg_softc *softc;
173 	struct mtx *mtx;
174 	int i;
175 
176 	periph = (struct cam_periph *)arg;
177 	mtx = cam_periph_mtx(periph);
178 	mtx_lock(mtx);
179 
180 	softc = (struct sg_softc *)periph->softc;
181 	KASSERT(softc->open_count >= 0, ("Negative open count %d",
182 		softc->open_count));
183 
184 	/*
185 	 * When we get this callback, we will get no more close calls from
186 	 * devfs.  So if we have any dangling opens, we need to release the
187 	 * reference held for that particular context.
188 	 */
189 	for (i = 0; i < softc->open_count; i++)
190 		cam_periph_release_locked(periph);
191 
192 	softc->open_count = 0;
193 
194 	/*
195 	 * Release the reference held for the device node, it is gone now.
196 	 */
197 	cam_periph_release_locked(periph);
198 
199 	/*
200 	 * We reference the lock directly here, instead of using
201 	 * cam_periph_unlock().  The reason is that the final call to
202 	 * cam_periph_release_locked() above could result in the periph
203 	 * getting freed.  If that is the case, dereferencing the periph
204 	 * with a cam_periph_unlock() call would cause a page fault.
205 	 */
206 	mtx_unlock(mtx);
207 }
208 
209 static void
210 sgoninvalidate(struct cam_periph *periph)
211 {
212 	struct sg_softc *softc;
213 
214 	softc = (struct sg_softc *)periph->softc;
215 
216 	/*
217 	 * Deregister any async callbacks.
218 	 */
219 	xpt_register_async(0, sgasync, periph, periph->path);
220 
221 	softc->flags |= SG_FLAG_INVALID;
222 
223 	/*
224 	 * Tell devfs this device has gone away, and ask for a callback
225 	 * when it has cleaned up its state.
226 	 */
227 	destroy_dev_sched_cb(softc->dev, sgdevgonecb, periph);
228 
229 	/*
230 	 * XXX Return all queued I/O with ENXIO.
231 	 * XXX Handle any transactions queued to the card
232 	 *     with XPT_ABORT_CCB.
233 	 */
234 
235 }
236 
237 static void
238 sgcleanup(struct cam_periph *periph)
239 {
240 	struct sg_softc *softc;
241 
242 	softc = (struct sg_softc *)periph->softc;
243 
244 	devstat_remove_entry(softc->device_stats);
245 
246 	free(softc, M_DEVBUF);
247 }
248 
249 static void
250 sgasync(void *callback_arg, uint32_t code, struct cam_path *path, void *arg)
251 {
252 	struct cam_periph *periph;
253 
254 	periph = (struct cam_periph *)callback_arg;
255 
256 	switch (code) {
257 	case AC_FOUND_DEVICE:
258 	{
259 		struct ccb_getdev *cgd;
260 		cam_status status;
261 
262 		cgd = (struct ccb_getdev *)arg;
263 		if (cgd == NULL)
264 			break;
265 
266 		if (cgd->protocol != PROTO_SCSI)
267 			break;
268 
269 		/*
270 		 * Allocate a peripheral instance for this device and
271 		 * start the probe process.
272 		 */
273 		status = cam_periph_alloc(sgregister, sgoninvalidate,
274 					  sgcleanup, NULL, "sg",
275 					  CAM_PERIPH_BIO, path,
276 					  sgasync, AC_FOUND_DEVICE, cgd);
277 		if ((status != CAM_REQ_CMP) && (status != CAM_REQ_INPROG)) {
278 			const struct cam_status_entry *entry;
279 
280 			entry = cam_fetch_status_entry(status);
281 			printf("sgasync: Unable to attach new device "
282 				"due to status %#x: %s\n", status, entry ?
283 				entry->status_text : "Unknown");
284 		}
285 		break;
286 	}
287 	default:
288 		cam_periph_async(periph, code, path, arg);
289 		break;
290 	}
291 }
292 
293 static cam_status
294 sgregister(struct cam_periph *periph, void *arg)
295 {
296 	struct sg_softc *softc;
297 	struct ccb_getdev *cgd;
298 	struct ccb_pathinq cpi;
299 	struct make_dev_args args;
300 	int no_tags, error;
301 
302 	cgd = (struct ccb_getdev *)arg;
303 	if (cgd == NULL) {
304 		printf("sgregister: no getdev CCB, can't register device\n");
305 		return (CAM_REQ_CMP_ERR);
306 	}
307 
308 	softc = malloc(sizeof(*softc), M_DEVBUF, M_ZERO | M_NOWAIT);
309 	if (softc == NULL) {
310 		printf("sgregister: Unable to allocate softc\n");
311 		return (CAM_REQ_CMP_ERR);
312 	}
313 
314 	softc->state = SG_STATE_NORMAL;
315 	softc->pd_type = SID_TYPE(&cgd->inq_data);
316 	softc->sg_timeout = SG_DEFAULT_TIMEOUT / SG_DEFAULT_HZ * hz;
317 	softc->sg_user_timeout = SG_DEFAULT_TIMEOUT;
318 	TAILQ_INIT(&softc->rdwr_done);
319 	periph->softc = softc;
320 
321 	xpt_path_inq(&cpi, periph->path);
322 
323 	if (cpi.maxio == 0)
324 		softc->maxio = DFLTPHYS;	/* traditional default */
325 	else if (cpi.maxio > maxphys)
326 		softc->maxio = maxphys;		/* for safety */
327 	else
328 		softc->maxio = cpi.maxio;	/* real value */
329 
330 	/*
331 	 * We pass in 0 for all blocksize, since we don't know what the
332 	 * blocksize of the device is, if it even has a blocksize.
333 	 */
334 	cam_periph_unlock(periph);
335 	no_tags = (cgd->inq_data.flags & SID_CmdQue) == 0;
336 	softc->device_stats = devstat_new_entry("sg",
337 			periph->unit_number, 0,
338 			DEVSTAT_NO_BLOCKSIZE
339 			| (no_tags ? DEVSTAT_NO_ORDERED_TAGS : 0),
340 			softc->pd_type |
341 			XPORT_DEVSTAT_TYPE(cpi.transport) |
342 			DEVSTAT_TYPE_PASS,
343 			DEVSTAT_PRIORITY_PASS);
344 
345 	/*
346 	 * Acquire a reference to the periph before we create the devfs
347 	 * instance for it.  We'll release this reference once the devfs
348 	 * instance has been freed.
349 	 */
350 	if (cam_periph_acquire(periph) != 0) {
351 		xpt_print(periph->path, "%s: lost periph during "
352 			  "registration!\n", __func__);
353 		cam_periph_lock(periph);
354 		return (CAM_REQ_CMP_ERR);
355 	}
356 
357 	/* Register the device */
358 	make_dev_args_init(&args);
359 	args.mda_devsw = &sg_cdevsw;
360 	args.mda_unit = periph->unit_number;
361 	args.mda_uid = UID_ROOT;
362 	args.mda_gid = GID_OPERATOR;
363 	args.mda_mode = 0600;
364 	args.mda_si_drv1 = periph;
365 	error = make_dev_s(&args, &softc->dev, "%s%d",
366 	    periph->periph_name, periph->unit_number);
367 	if (error != 0) {
368 		cam_periph_lock(periph);
369 		cam_periph_release_locked(periph);
370 		return (CAM_REQ_CMP_ERR);
371 	}
372 	if (periph->unit_number < 26) {
373 		(void)make_dev_alias(softc->dev, "sg%c",
374 		    periph->unit_number + 'a');
375 	} else {
376 		(void)make_dev_alias(softc->dev, "sg%c%c",
377 		    ((periph->unit_number / 26) - 1) + 'a',
378 		    (periph->unit_number % 26) + 'a');
379 	}
380 	cam_periph_lock(periph);
381 
382 	/*
383 	 * Add as async callback so that we get
384 	 * notified if this device goes away.
385 	 */
386 	xpt_register_async(AC_LOST_DEVICE, sgasync, periph, periph->path);
387 
388 	if (bootverbose)
389 		xpt_announce_periph(periph, NULL);
390 
391 	return (CAM_REQ_CMP);
392 }
393 
394 static void
395 sgdone(struct cam_periph *periph, union ccb *done_ccb)
396 {
397 	struct sg_softc *softc;
398 	struct ccb_scsiio *csio;
399 
400 	softc = (struct sg_softc *)periph->softc;
401 	csio = &done_ccb->csio;
402 	switch (csio->ccb_h.ccb_type) {
403 	case SG_CCB_RDWR_IO:
404 	{
405 		struct sg_rdwr *rdwr;
406 
407 		devstat_end_transaction(softc->device_stats,
408 					csio->dxfer_len,
409 					csio->tag_action & 0xf,
410 					((csio->ccb_h.flags & CAM_DIR_MASK) ==
411 					CAM_DIR_NONE) ? DEVSTAT_NO_DATA :
412 					(csio->ccb_h.flags & CAM_DIR_OUT) ?
413 					DEVSTAT_WRITE : DEVSTAT_READ,
414 					NULL, NULL);
415 
416 		rdwr = done_ccb->ccb_h.ccb_rdwr;
417 		rdwr->state = SG_RDWR_DONE;
418 		wakeup(rdwr);
419 		break;
420 	}
421 	default:
422 		panic("unknown sg CCB type");
423 	}
424 }
425 
426 static int
427 sgopen(struct cdev *dev, int flags, int fmt, struct thread *td)
428 {
429 	struct cam_periph *periph;
430 	struct sg_softc *softc;
431 	int error = 0;
432 
433 	periph = (struct cam_periph *)dev->si_drv1;
434 	if (cam_periph_acquire(periph) != 0)
435 		return (ENXIO);
436 
437 	/*
438 	 * Don't allow access when we're running at a high securelevel.
439 	 */
440 	error = securelevel_gt(td->td_ucred, 1);
441 	if (error) {
442 		cam_periph_release(periph);
443 		return (error);
444 	}
445 
446 	cam_periph_lock(periph);
447 
448 	softc = (struct sg_softc *)periph->softc;
449 	if (softc->flags & SG_FLAG_INVALID) {
450 		cam_periph_release_locked(periph);
451 		cam_periph_unlock(periph);
452 		return (ENXIO);
453 	}
454 
455 	softc->open_count++;
456 
457 	cam_periph_unlock(periph);
458 
459 	return (error);
460 }
461 
462 static int
463 sgclose(struct cdev *dev, int flag, int fmt, struct thread *td)
464 {
465 	struct cam_periph *periph;
466 	struct sg_softc   *softc;
467 	struct mtx *mtx;
468 
469 	periph = (struct cam_periph *)dev->si_drv1;
470 	mtx = cam_periph_mtx(periph);
471 	mtx_lock(mtx);
472 
473 	softc = periph->softc;
474 	softc->open_count--;
475 
476 	cam_periph_release_locked(periph);
477 
478 	/*
479 	 * We reference the lock directly here, instead of using
480 	 * cam_periph_unlock().  The reason is that the call to
481 	 * cam_periph_release_locked() above could result in the periph
482 	 * getting freed.  If that is the case, dereferencing the periph
483 	 * with a cam_periph_unlock() call would cause a page fault.
484 	 *
485 	 * cam_periph_release() avoids this problem using the same method,
486 	 * but we're manually acquiring and dropping the lock here to
487 	 * protect the open count and avoid another lock acquisition and
488 	 * release.
489 	 */
490 	mtx_unlock(mtx);
491 
492 	return (0);
493 }
494 
495 static int
496 sgioctl(struct cdev *dev, u_long cmd, caddr_t arg, int flag, struct thread *td)
497 {
498 	union ccb *ccb;
499 	struct ccb_scsiio *csio;
500 	struct cam_periph *periph;
501 	struct sg_softc *softc;
502 	struct sg_io_hdr *req;
503 	int dir, error;
504 
505 	periph = (struct cam_periph *)dev->si_drv1;
506 	cam_periph_lock(periph);
507 
508 	softc = (struct sg_softc *)periph->softc;
509 	error = 0;
510 
511 	switch (cmd) {
512 	case SG_GET_VERSION_NUM:
513 	{
514 		int *version = (int *)arg;
515 
516 		*version = sg_version;
517 		break;
518 	}
519 	case SG_SET_TIMEOUT:
520 	{
521 		u_int user_timeout = *(u_int *)arg;
522 
523 		softc->sg_user_timeout = user_timeout;
524 		softc->sg_timeout = user_timeout / SG_DEFAULT_HZ * hz;
525 		break;
526 	}
527 	case SG_GET_TIMEOUT:
528 		/*
529 		 * The value is returned directly to the syscall.
530 		 */
531 		td->td_retval[0] = softc->sg_user_timeout;
532 		error = 0;
533 		break;
534 	case SG_IO:
535 		req = (struct sg_io_hdr *)arg;
536 
537 		if (req->cmd_len > IOCDBLEN) {
538 			error = EINVAL;
539 			break;
540 		}
541 
542 		if (req->iovec_count != 0) {
543 			error = EOPNOTSUPP;
544 			break;
545 		}
546 
547 		ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL);
548 		csio = &ccb->csio;
549 
550 		error = copyin(req->cmdp, &csio->cdb_io.cdb_bytes,
551 		    req->cmd_len);
552 		if (error) {
553 			xpt_release_ccb(ccb);
554 			break;
555 		}
556 
557 		switch(req->dxfer_direction) {
558 		case SG_DXFER_TO_DEV:
559 			dir = CAM_DIR_OUT;
560 			break;
561 		case SG_DXFER_FROM_DEV:
562 			dir = CAM_DIR_IN;
563 			break;
564 		case SG_DXFER_TO_FROM_DEV:
565 			dir = CAM_DIR_BOTH;
566 			break;
567 		case SG_DXFER_NONE:
568 		default:
569 			dir = CAM_DIR_NONE;
570 			break;
571 		}
572 
573 		cam_fill_csio(csio,
574 			      /*retries*/1,
575 			      /*cbfcnp*/NULL,
576 			      dir|CAM_DEV_QFRZDIS,
577 			      MSG_SIMPLE_Q_TAG,
578 			      req->dxferp,
579 			      req->dxfer_len,
580 			      req->mx_sb_len,
581 			      req->cmd_len,
582 			      req->timeout);
583 
584 		error = sgsendccb(periph, ccb);
585 		if (error) {
586 			req->host_status = DID_ERROR;
587 			req->driver_status = DRIVER_INVALID;
588 			xpt_release_ccb(ccb);
589 			break;
590 		}
591 
592 		req->status = csio->scsi_status;
593 		req->masked_status = (csio->scsi_status >> 1) & 0x7f;
594 		sg_scsiio_status(csio, &req->host_status, &req->driver_status);
595 		req->resid = csio->resid;
596 		req->duration = csio->ccb_h.timeout;
597 		req->info = 0;
598 
599 		if ((csio->ccb_h.status & CAM_AUTOSNS_VALID)
600 		    && (req->sbp != NULL)) {
601 			req->sb_len_wr = req->mx_sb_len - csio->sense_resid;
602 			error = copyout(&csio->sense_data, req->sbp,
603 					req->sb_len_wr);
604 		}
605 
606 		xpt_release_ccb(ccb);
607 		break;
608 
609 	case SG_GET_RESERVED_SIZE:
610 	{
611 		int *size = (int *)arg;
612 		*size = DFLTPHYS;
613 		break;
614 	}
615 
616 	case SG_GET_SCSI_ID:
617 	{
618 		struct sg_scsi_id *id = (struct sg_scsi_id *)arg;
619 
620 		id->host_no = cam_sim_path(xpt_path_sim(periph->path));
621 		id->channel = xpt_path_path_id(periph->path);
622 		id->scsi_id = xpt_path_target_id(periph->path);
623 		id->lun = xpt_path_lun_id(periph->path);
624 		id->scsi_type = softc->pd_type;
625 		id->h_cmd_per_lun = 1;
626 		id->d_queue_depth = 1;
627 		id->unused[0] = 0;
628 		id->unused[1] = 0;
629 		break;
630 	}
631 
632 	case SG_GET_SG_TABLESIZE:
633 	{
634 		int *size = (int *)arg;
635 		*size = 0;
636 		break;
637 	}
638 
639 	case SG_EMULATED_HOST:
640 	case SG_SET_TRANSFORM:
641 	case SG_GET_TRANSFORM:
642 	case SG_GET_NUM_WAITING:
643 	case SG_SCSI_RESET:
644 	case SG_GET_REQUEST_TABLE:
645 	case SG_SET_KEEP_ORPHAN:
646 	case SG_GET_KEEP_ORPHAN:
647 	case SG_GET_ACCESS_COUNT:
648 	case SG_SET_FORCE_LOW_DMA:
649 	case SG_GET_LOW_DMA:
650 	case SG_SET_FORCE_PACK_ID:
651 	case SG_GET_PACK_ID:
652 	case SG_SET_RESERVED_SIZE:
653 	case SG_GET_COMMAND_Q:
654 	case SG_SET_COMMAND_Q:
655 	case SG_SET_DEBUG:
656 	case SG_NEXT_CMD_LEN:
657 	default:
658 #ifdef CAMDEBUG
659 		printf("sgioctl: rejecting cmd 0x%lx\n", cmd);
660 #endif
661 		error = ENODEV;
662 		break;
663 	}
664 
665 	cam_periph_unlock(periph);
666 	return (error);
667 }
668 
669 static int
670 sgwrite(struct cdev *dev, struct uio *uio, int ioflag)
671 {
672 	union ccb *ccb;
673 	struct cam_periph *periph;
674 	struct ccb_scsiio *csio;
675 	struct sg_softc *sc;
676 	struct sg_header *hdr;
677 	struct sg_rdwr *rdwr;
678 	u_char cdb_cmd;
679 	char *buf;
680 	int error = 0, cdb_len, buf_len, dir;
681 
682 	periph = dev->si_drv1;
683 	rdwr = malloc(sizeof(*rdwr), M_DEVBUF, M_WAITOK | M_ZERO);
684 	hdr = &rdwr->hdr.hdr;
685 
686 	/* Copy in the header block and sanity check it */
687 	if (uio->uio_resid < sizeof(*hdr)) {
688 		error = EINVAL;
689 		goto out_hdr;
690 	}
691 	error = uiomove(hdr, sizeof(*hdr), uio);
692 	if (error)
693 		goto out_hdr;
694 
695 	/* XXX: We don't support SG 3.x read/write API. */
696 	if (hdr->reply_len < 0) {
697 		error = ENODEV;
698 		goto out_hdr;
699 	}
700 
701 	ccb = xpt_alloc_ccb();
702 	if (ccb == NULL) {
703 		error = ENOMEM;
704 		goto out_hdr;
705 	}
706 	csio = &ccb->csio;
707 
708 	/*
709 	 * Copy in the CDB block.  The designers of the interface didn't
710 	 * bother to provide a size for this in the header, so we have to
711 	 * figure it out ourselves.
712 	 */
713 	if (uio->uio_resid < 1)
714 		goto out_ccb;
715 	error = uiomove(&cdb_cmd, 1, uio);
716 	if (error)
717 		goto out_ccb;
718 	if (hdr->twelve_byte)
719 		cdb_len = 12;
720 	else
721 		cdb_len = scsi_group_len(cdb_cmd);
722 	/*
723 	 * We've already read the first byte of the CDB and advanced the uio
724 	 * pointer.  Just read the rest.
725 	 */
726 	csio->cdb_io.cdb_bytes[0] = cdb_cmd;
727 	error = uiomove(&csio->cdb_io.cdb_bytes[1], cdb_len - 1, uio);
728 	if (error)
729 		goto out_ccb;
730 
731 	/*
732 	 * Now set up the data block.  Again, the designers didn't bother
733 	 * to make this reliable.
734 	 */
735 	buf_len = uio->uio_resid;
736 	if (buf_len != 0) {
737 		buf = malloc(buf_len, M_DEVBUF, M_WAITOK | M_ZERO);
738 		error = uiomove(buf, buf_len, uio);
739 		if (error)
740 			goto out_buf;
741 		dir = CAM_DIR_OUT;
742 	} else if (hdr->reply_len != 0) {
743 		buf = malloc(hdr->reply_len, M_DEVBUF, M_WAITOK | M_ZERO);
744 		buf_len = hdr->reply_len;
745 		dir = CAM_DIR_IN;
746 	} else {
747 		buf = NULL;
748 		buf_len = 0;
749 		dir = CAM_DIR_NONE;
750 	}
751 
752 	cam_periph_lock(periph);
753 	sc = periph->softc;
754 	xpt_setup_ccb(&ccb->ccb_h, periph->path, CAM_PRIORITY_NORMAL);
755 	cam_fill_csio(csio,
756 		      /*retries*/1,
757 		      sgdone,
758 		      dir|CAM_DEV_QFRZDIS,
759 		      MSG_SIMPLE_Q_TAG,
760 		      buf,
761 		      buf_len,
762 		      SG_MAX_SENSE,
763 		      cdb_len,
764 		      sc->sg_timeout);
765 
766 	/*
767 	 * Send off the command and hope that it works. This path does not
768 	 * go through sgstart because the I/O is supposed to be asynchronous.
769 	 */
770 	rdwr->buf = buf;
771 	rdwr->buf_len = buf_len;
772 	rdwr->tag = hdr->pack_id;
773 	rdwr->ccb = ccb;
774 	rdwr->state = SG_RDWR_INPROG;
775 	ccb->ccb_h.ccb_rdwr = rdwr;
776 	ccb->ccb_h.ccb_type = SG_CCB_RDWR_IO;
777 	TAILQ_INSERT_TAIL(&sc->rdwr_done, rdwr, rdwr_link);
778 	error = sgsendrdwr(periph, ccb);
779 	cam_periph_unlock(periph);
780 	return (error);
781 
782 out_buf:
783 	free(buf, M_DEVBUF);
784 out_ccb:
785 	xpt_free_ccb(ccb);
786 out_hdr:
787 	free(rdwr, M_DEVBUF);
788 	return (error);
789 }
790 
791 static int
792 sgread(struct cdev *dev, struct uio *uio, int ioflag)
793 {
794 	struct ccb_scsiio *csio;
795 	struct cam_periph *periph;
796 	struct sg_softc *sc;
797 	struct sg_header *hdr;
798 	struct sg_rdwr *rdwr;
799 	u_short hstat, dstat;
800 	int error, pack_len, reply_len, pack_id;
801 
802 	periph = dev->si_drv1;
803 
804 	/* XXX The pack len field needs to be updated and written out instead
805 	 * of discarded.  Not sure how to do that.
806 	 */
807 	uio->uio_rw = UIO_WRITE;
808 	if ((error = uiomove(&pack_len, 4, uio)) != 0)
809 		return (error);
810 	if ((error = uiomove(&reply_len, 4, uio)) != 0)
811 		return (error);
812 	if ((error = uiomove(&pack_id, 4, uio)) != 0)
813 		return (error);
814 	uio->uio_rw = UIO_READ;
815 
816 	cam_periph_lock(periph);
817 	sc = periph->softc;
818 search:
819 	TAILQ_FOREACH(rdwr, &sc->rdwr_done, rdwr_link) {
820 		if (rdwr->tag == pack_id)
821 			break;
822 	}
823 	if ((rdwr == NULL) || (rdwr->state != SG_RDWR_DONE)) {
824 		if (cam_periph_sleep(periph, rdwr, PCATCH, "sgread", 0) == ERESTART)
825 			return (EAGAIN);
826 		goto search;
827 	}
828 	TAILQ_REMOVE(&sc->rdwr_done, rdwr, rdwr_link);
829 	cam_periph_unlock(periph);
830 
831 	hdr = &rdwr->hdr.hdr;
832 	csio = &rdwr->ccb->csio;
833 	sg_scsiio_status(csio, &hstat, &dstat);
834 	hdr->host_status = hstat;
835 	hdr->driver_status = dstat;
836 	hdr->target_status = csio->scsi_status >> 1;
837 
838 	switch (hstat) {
839 	case DID_OK:
840 	case DID_PASSTHROUGH:
841 	case DID_SOFT_ERROR:
842 		hdr->result = 0;
843 		break;
844 	case DID_NO_CONNECT:
845 	case DID_BUS_BUSY:
846 	case DID_TIME_OUT:
847 		hdr->result = EBUSY;
848 		break;
849 	case DID_BAD_TARGET:
850 	case DID_ABORT:
851 	case DID_PARITY:
852 	case DID_RESET:
853 	case DID_BAD_INTR:
854 	case DID_ERROR:
855 	default:
856 		hdr->result = EIO;
857 		break;
858 	}
859 
860 	if (dstat == DRIVER_SENSE) {
861 		bcopy(&csio->sense_data, hdr->sense_buffer,
862 		      min(csio->sense_len, SG_MAX_SENSE));
863 #ifdef CAMDEBUG
864 		scsi_sense_print(csio);
865 #endif
866 	}
867 
868 	error = uiomove(&hdr->result, sizeof(*hdr) -
869 			offsetof(struct sg_header, result), uio);
870 	if ((error == 0) && (hdr->result == 0))
871 		error = uiomove(rdwr->buf, rdwr->buf_len, uio);
872 
873 	cam_periph_lock(periph);
874 	xpt_free_ccb(rdwr->ccb);
875 	cam_periph_unlock(periph);
876 	free(rdwr->buf, M_DEVBUF);
877 	free(rdwr, M_DEVBUF);
878 	return (error);
879 }
880 
881 static int
882 sgsendccb(struct cam_periph *periph, union ccb *ccb)
883 {
884 	struct sg_softc *softc;
885 	struct cam_periph_map_info mapinfo;
886 	int error;
887 
888 	softc = periph->softc;
889 	bzero(&mapinfo, sizeof(mapinfo));
890 
891 	/*
892 	 * cam_periph_mapmem calls into proc and vm functions that can
893 	 * sleep as well as trigger I/O, so we can't hold the lock.
894 	 * Dropping it here is reasonably safe.
895 	 * The only CCB opcode that is possible here is XPT_SCSI_IO, no
896 	 * need for additional checks.
897 	 */
898 	cam_periph_unlock(periph);
899 	error = cam_periph_mapmem(ccb, &mapinfo, softc->maxio);
900 	cam_periph_lock(periph);
901 	if (error)
902 		return (error);
903 
904 	error = cam_periph_runccb(ccb,
905 				  sgerror,
906 				  CAM_RETRY_SELTO,
907 				  SF_RETRY_UA,
908 				  softc->device_stats);
909 
910 	cam_periph_unlock(periph);
911 	cam_periph_unmapmem(ccb, &mapinfo);
912 	cam_periph_lock(periph);
913 
914 	return (error);
915 }
916 
917 static int
918 sgsendrdwr(struct cam_periph *periph, union ccb *ccb)
919 {
920 	struct sg_softc *softc;
921 
922 	softc = periph->softc;
923 	devstat_start_transaction(softc->device_stats, NULL);
924 	xpt_action(ccb);
925 	return (0);
926 }
927 
928 static int
929 sgerror(union ccb *ccb, uint32_t cam_flags, uint32_t sense_flags)
930 {
931 
932 	return (cam_periph_error(ccb, cam_flags, sense_flags));
933 }
934 
935 static void
936 sg_scsiio_status(struct ccb_scsiio *csio, u_short *hoststat, u_short *drvstat)
937 {
938 	int status;
939 
940 	status = csio->ccb_h.status;
941 
942 	switch (status & CAM_STATUS_MASK) {
943 	case CAM_REQ_CMP:
944 		*hoststat = DID_OK;
945 		*drvstat = 0;
946 		break;
947 	case CAM_REQ_CMP_ERR:
948 		*hoststat = DID_ERROR;
949 		*drvstat = 0;
950 		break;
951 	case CAM_REQ_ABORTED:
952 		*hoststat = DID_ABORT;
953 		*drvstat = 0;
954 		break;
955 	case CAM_REQ_INVALID:
956 		*hoststat = DID_ERROR;
957 		*drvstat = DRIVER_INVALID;
958 		break;
959 	case CAM_DEV_NOT_THERE:
960 		*hoststat = DID_BAD_TARGET;
961 		*drvstat = 0;
962 		break;
963 	case CAM_SEL_TIMEOUT:
964 		*hoststat = DID_NO_CONNECT;
965 		*drvstat = 0;
966 		break;
967 	case CAM_CMD_TIMEOUT:
968 		*hoststat = DID_TIME_OUT;
969 		*drvstat = 0;
970 		break;
971 	case CAM_SCSI_STATUS_ERROR:
972 		*hoststat = DID_ERROR;
973 		*drvstat = 0;
974 		break;
975 	case CAM_SCSI_BUS_RESET:
976 		*hoststat = DID_RESET;
977 		*drvstat = 0;
978 		break;
979 	case CAM_UNCOR_PARITY:
980 		*hoststat = DID_PARITY;
981 		*drvstat = 0;
982 		break;
983 	case CAM_SCSI_BUSY:
984 		*hoststat = DID_BUS_BUSY;
985 		*drvstat = 0;
986 		break;
987 	default:
988 		*hoststat = DID_ERROR;
989 		*drvstat = DRIVER_ERROR;
990 	}
991 
992 	if (status & CAM_AUTOSNS_VALID)
993 		*drvstat = DRIVER_SENSE;
994 }
995 
996 static int
997 scsi_group_len(u_char cmd)
998 {
999 	int len[] = {6, 10, 10, 12, 12, 12, 10, 10};
1000 	int group;
1001 
1002 	group = (cmd >> 5) & 0x7;
1003 	return (len[group]);
1004 }
1005