xref: /freebsd/sys/cam/scsi/scsi_sg.c (revision 7ef62cebc2f965b0f640263e179276928885e33d)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause
3  *
4  * Copyright (c) 2007 Scott Long
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions, and the following disclaimer,
12  *    without modification, immediately at the beginning of the file.
13  * 2. The name of the author may not be used to endorse or promote products
14  *    derived from this software without specific prior written permission.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
20  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26  * SUCH DAMAGE.
27  */
28 
29 /*
30  * scsi_sg peripheral driver.  This driver is meant to implement the Linux
31  * SG passthrough interface for SCSI.
32  */
33 
34 #include <sys/cdefs.h>
35 __FBSDID("$FreeBSD$");
36 
37 #include <sys/param.h>
38 #include <sys/systm.h>
39 #include <sys/kernel.h>
40 #include <sys/types.h>
41 #include <sys/bio.h>
42 #include <sys/malloc.h>
43 #include <sys/fcntl.h>
44 #include <sys/ioccom.h>
45 #include <sys/conf.h>
46 #include <sys/errno.h>
47 #include <sys/devicestat.h>
48 #include <sys/proc.h>
49 #include <sys/uio.h>
50 
51 #include <cam/cam.h>
52 #include <cam/cam_ccb.h>
53 #include <cam/cam_periph.h>
54 #include <cam/cam_queue.h>
55 #include <cam/cam_xpt_periph.h>
56 #include <cam/cam_debug.h>
57 #include <cam/cam_sim.h>
58 
59 #include <cam/scsi/scsi_all.h>
60 #include <cam/scsi/scsi_message.h>
61 #include <cam/scsi/scsi_sg.h>
62 
63 typedef enum {
64 	SG_FLAG_LOCKED		= 0x01,
65 	SG_FLAG_INVALID		= 0x02
66 } sg_flags;
67 
68 typedef enum {
69 	SG_STATE_NORMAL
70 } sg_state;
71 
72 typedef enum {
73 	SG_RDWR_FREE,
74 	SG_RDWR_INPROG,
75 	SG_RDWR_DONE
76 } sg_rdwr_state;
77 
78 typedef enum {
79 	SG_CCB_RDWR_IO
80 } sg_ccb_types;
81 
82 #define ccb_type	ppriv_field0
83 #define ccb_rdwr	ppriv_ptr1
84 
85 struct sg_rdwr {
86 	TAILQ_ENTRY(sg_rdwr)	rdwr_link;
87 	int			tag;
88 	int			state;
89 	int			buf_len;
90 	char			*buf;
91 	union ccb		*ccb;
92 	union {
93 		struct sg_header hdr;
94 		struct sg_io_hdr io_hdr;
95 	} hdr;
96 };
97 
98 struct sg_softc {
99 	sg_state		state;
100 	sg_flags		flags;
101 	int			open_count;
102 	u_int			maxio;
103 	struct devstat		*device_stats;
104 	TAILQ_HEAD(, sg_rdwr)	rdwr_done;
105 	struct cdev		*dev;
106 	int			sg_timeout;
107 	int			sg_user_timeout;
108 	uint8_t			pd_type;
109 };
110 
111 static d_open_t		sgopen;
112 static d_close_t	sgclose;
113 static d_ioctl_t	sgioctl;
114 static d_write_t	sgwrite;
115 static d_read_t		sgread;
116 
117 static periph_init_t	sginit;
118 static periph_ctor_t	sgregister;
119 static periph_oninv_t	sgoninvalidate;
120 static periph_dtor_t	sgcleanup;
121 static void		sgasync(void *callback_arg, uint32_t code,
122 				struct cam_path *path, void *arg);
123 static void		sgdone(struct cam_periph *periph, union ccb *done_ccb);
124 static int		sgsendccb(struct cam_periph *periph, union ccb *ccb);
125 static int		sgsendrdwr(struct cam_periph *periph, union ccb *ccb);
126 static int		sgerror(union ccb *ccb, uint32_t cam_flags,
127 				uint32_t sense_flags);
128 static void		sg_scsiio_status(struct ccb_scsiio *csio,
129 					 u_short *hoststat, u_short *drvstat);
130 
131 static int		scsi_group_len(u_char cmd);
132 
133 static struct periph_driver sgdriver =
134 {
135 	sginit, "sg",
136 	TAILQ_HEAD_INITIALIZER(sgdriver.units), /* gen */ 0
137 };
138 PERIPHDRIVER_DECLARE(sg, sgdriver);
139 
140 static struct cdevsw sg_cdevsw = {
141 	.d_version =	D_VERSION,
142 	.d_flags =	D_TRACKCLOSE,
143 	.d_open =	sgopen,
144 	.d_close =	sgclose,
145 	.d_ioctl =	sgioctl,
146 	.d_write =	sgwrite,
147 	.d_read =	sgread,
148 	.d_name =	"sg",
149 };
150 
151 static int sg_version = 30125;
152 
153 static void
154 sginit(void)
155 {
156 	cam_status status;
157 
158 	/*
159 	 * Install a global async callback.  This callback will receive aync
160 	 * callbacks like "new device found".
161 	 */
162 	status = xpt_register_async(AC_FOUND_DEVICE, sgasync, NULL, NULL);
163 
164 	if (status != CAM_REQ_CMP) {
165 		printf("sg: Failed to attach master async callbac "
166 			"due to status 0x%x!\n", status);
167 	}
168 }
169 
170 static void
171 sgdevgonecb(void *arg)
172 {
173 	struct cam_periph *periph;
174 	struct sg_softc *softc;
175 	struct mtx *mtx;
176 	int i;
177 
178 	periph = (struct cam_periph *)arg;
179 	mtx = cam_periph_mtx(periph);
180 	mtx_lock(mtx);
181 
182 	softc = (struct sg_softc *)periph->softc;
183 	KASSERT(softc->open_count >= 0, ("Negative open count %d",
184 		softc->open_count));
185 
186 	/*
187 	 * When we get this callback, we will get no more close calls from
188 	 * devfs.  So if we have any dangling opens, we need to release the
189 	 * reference held for that particular context.
190 	 */
191 	for (i = 0; i < softc->open_count; i++)
192 		cam_periph_release_locked(periph);
193 
194 	softc->open_count = 0;
195 
196 	/*
197 	 * Release the reference held for the device node, it is gone now.
198 	 */
199 	cam_periph_release_locked(periph);
200 
201 	/*
202 	 * We reference the lock directly here, instead of using
203 	 * cam_periph_unlock().  The reason is that the final call to
204 	 * cam_periph_release_locked() above could result in the periph
205 	 * getting freed.  If that is the case, dereferencing the periph
206 	 * with a cam_periph_unlock() call would cause a page fault.
207 	 */
208 	mtx_unlock(mtx);
209 }
210 
211 static void
212 sgoninvalidate(struct cam_periph *periph)
213 {
214 	struct sg_softc *softc;
215 
216 	softc = (struct sg_softc *)periph->softc;
217 
218 	/*
219 	 * Deregister any async callbacks.
220 	 */
221 	xpt_register_async(0, sgasync, periph, periph->path);
222 
223 	softc->flags |= SG_FLAG_INVALID;
224 
225 	/*
226 	 * Tell devfs this device has gone away, and ask for a callback
227 	 * when it has cleaned up its state.
228 	 */
229 	destroy_dev_sched_cb(softc->dev, sgdevgonecb, periph);
230 
231 	/*
232 	 * XXX Return all queued I/O with ENXIO.
233 	 * XXX Handle any transactions queued to the card
234 	 *     with XPT_ABORT_CCB.
235 	 */
236 
237 }
238 
239 static void
240 sgcleanup(struct cam_periph *periph)
241 {
242 	struct sg_softc *softc;
243 
244 	softc = (struct sg_softc *)periph->softc;
245 
246 	devstat_remove_entry(softc->device_stats);
247 
248 	free(softc, M_DEVBUF);
249 }
250 
251 static void
252 sgasync(void *callback_arg, uint32_t code, struct cam_path *path, void *arg)
253 {
254 	struct cam_periph *periph;
255 
256 	periph = (struct cam_periph *)callback_arg;
257 
258 	switch (code) {
259 	case AC_FOUND_DEVICE:
260 	{
261 		struct ccb_getdev *cgd;
262 		cam_status status;
263 
264 		cgd = (struct ccb_getdev *)arg;
265 		if (cgd == NULL)
266 			break;
267 
268 		if (cgd->protocol != PROTO_SCSI)
269 			break;
270 
271 		/*
272 		 * Allocate a peripheral instance for this device and
273 		 * start the probe process.
274 		 */
275 		status = cam_periph_alloc(sgregister, sgoninvalidate,
276 					  sgcleanup, NULL, "sg",
277 					  CAM_PERIPH_BIO, path,
278 					  sgasync, AC_FOUND_DEVICE, cgd);
279 		if ((status != CAM_REQ_CMP) && (status != CAM_REQ_INPROG)) {
280 			const struct cam_status_entry *entry;
281 
282 			entry = cam_fetch_status_entry(status);
283 			printf("sgasync: Unable to attach new device "
284 				"due to status %#x: %s\n", status, entry ?
285 				entry->status_text : "Unknown");
286 		}
287 		break;
288 	}
289 	default:
290 		cam_periph_async(periph, code, path, arg);
291 		break;
292 	}
293 }
294 
295 static cam_status
296 sgregister(struct cam_periph *periph, void *arg)
297 {
298 	struct sg_softc *softc;
299 	struct ccb_getdev *cgd;
300 	struct ccb_pathinq cpi;
301 	struct make_dev_args args;
302 	int no_tags, error;
303 
304 	cgd = (struct ccb_getdev *)arg;
305 	if (cgd == NULL) {
306 		printf("sgregister: no getdev CCB, can't register device\n");
307 		return (CAM_REQ_CMP_ERR);
308 	}
309 
310 	softc = malloc(sizeof(*softc), M_DEVBUF, M_ZERO | M_NOWAIT);
311 	if (softc == NULL) {
312 		printf("sgregister: Unable to allocate softc\n");
313 		return (CAM_REQ_CMP_ERR);
314 	}
315 
316 	softc->state = SG_STATE_NORMAL;
317 	softc->pd_type = SID_TYPE(&cgd->inq_data);
318 	softc->sg_timeout = SG_DEFAULT_TIMEOUT / SG_DEFAULT_HZ * hz;
319 	softc->sg_user_timeout = SG_DEFAULT_TIMEOUT;
320 	TAILQ_INIT(&softc->rdwr_done);
321 	periph->softc = softc;
322 
323 	xpt_path_inq(&cpi, periph->path);
324 
325 	if (cpi.maxio == 0)
326 		softc->maxio = DFLTPHYS;	/* traditional default */
327 	else if (cpi.maxio > maxphys)
328 		softc->maxio = maxphys;		/* for safety */
329 	else
330 		softc->maxio = cpi.maxio;	/* real value */
331 
332 	/*
333 	 * We pass in 0 for all blocksize, since we don't know what the
334 	 * blocksize of the device is, if it even has a blocksize.
335 	 */
336 	cam_periph_unlock(periph);
337 	no_tags = (cgd->inq_data.flags & SID_CmdQue) == 0;
338 	softc->device_stats = devstat_new_entry("sg",
339 			periph->unit_number, 0,
340 			DEVSTAT_NO_BLOCKSIZE
341 			| (no_tags ? DEVSTAT_NO_ORDERED_TAGS : 0),
342 			softc->pd_type |
343 			XPORT_DEVSTAT_TYPE(cpi.transport) |
344 			DEVSTAT_TYPE_PASS,
345 			DEVSTAT_PRIORITY_PASS);
346 
347 	/*
348 	 * Acquire a reference to the periph before we create the devfs
349 	 * instance for it.  We'll release this reference once the devfs
350 	 * instance has been freed.
351 	 */
352 	if (cam_periph_acquire(periph) != 0) {
353 		xpt_print(periph->path, "%s: lost periph during "
354 			  "registration!\n", __func__);
355 		cam_periph_lock(periph);
356 		return (CAM_REQ_CMP_ERR);
357 	}
358 
359 	/* Register the device */
360 	make_dev_args_init(&args);
361 	args.mda_devsw = &sg_cdevsw;
362 	args.mda_unit = periph->unit_number;
363 	args.mda_uid = UID_ROOT;
364 	args.mda_gid = GID_OPERATOR;
365 	args.mda_mode = 0600;
366 	args.mda_si_drv1 = periph;
367 	error = make_dev_s(&args, &softc->dev, "%s%d",
368 	    periph->periph_name, periph->unit_number);
369 	if (error != 0) {
370 		cam_periph_lock(periph);
371 		cam_periph_release_locked(periph);
372 		return (CAM_REQ_CMP_ERR);
373 	}
374 	if (periph->unit_number < 26) {
375 		(void)make_dev_alias(softc->dev, "sg%c",
376 		    periph->unit_number + 'a');
377 	} else {
378 		(void)make_dev_alias(softc->dev, "sg%c%c",
379 		    ((periph->unit_number / 26) - 1) + 'a',
380 		    (periph->unit_number % 26) + 'a');
381 	}
382 	cam_periph_lock(periph);
383 
384 	/*
385 	 * Add as async callback so that we get
386 	 * notified if this device goes away.
387 	 */
388 	xpt_register_async(AC_LOST_DEVICE, sgasync, periph, periph->path);
389 
390 	if (bootverbose)
391 		xpt_announce_periph(periph, NULL);
392 
393 	return (CAM_REQ_CMP);
394 }
395 
396 static void
397 sgdone(struct cam_periph *periph, union ccb *done_ccb)
398 {
399 	struct sg_softc *softc;
400 	struct ccb_scsiio *csio;
401 
402 	softc = (struct sg_softc *)periph->softc;
403 	csio = &done_ccb->csio;
404 	switch (csio->ccb_h.ccb_type) {
405 	case SG_CCB_RDWR_IO:
406 	{
407 		struct sg_rdwr *rdwr;
408 
409 		devstat_end_transaction(softc->device_stats,
410 					csio->dxfer_len,
411 					csio->tag_action & 0xf,
412 					((csio->ccb_h.flags & CAM_DIR_MASK) ==
413 					CAM_DIR_NONE) ? DEVSTAT_NO_DATA :
414 					(csio->ccb_h.flags & CAM_DIR_OUT) ?
415 					DEVSTAT_WRITE : DEVSTAT_READ,
416 					NULL, NULL);
417 
418 		rdwr = done_ccb->ccb_h.ccb_rdwr;
419 		rdwr->state = SG_RDWR_DONE;
420 		wakeup(rdwr);
421 		break;
422 	}
423 	default:
424 		panic("unknown sg CCB type");
425 	}
426 }
427 
428 static int
429 sgopen(struct cdev *dev, int flags, int fmt, struct thread *td)
430 {
431 	struct cam_periph *periph;
432 	struct sg_softc *softc;
433 	int error = 0;
434 
435 	periph = (struct cam_periph *)dev->si_drv1;
436 	if (cam_periph_acquire(periph) != 0)
437 		return (ENXIO);
438 
439 	/*
440 	 * Don't allow access when we're running at a high securelevel.
441 	 */
442 	error = securelevel_gt(td->td_ucred, 1);
443 	if (error) {
444 		cam_periph_release(periph);
445 		return (error);
446 	}
447 
448 	cam_periph_lock(periph);
449 
450 	softc = (struct sg_softc *)periph->softc;
451 	if (softc->flags & SG_FLAG_INVALID) {
452 		cam_periph_release_locked(periph);
453 		cam_periph_unlock(periph);
454 		return (ENXIO);
455 	}
456 
457 	softc->open_count++;
458 
459 	cam_periph_unlock(periph);
460 
461 	return (error);
462 }
463 
464 static int
465 sgclose(struct cdev *dev, int flag, int fmt, struct thread *td)
466 {
467 	struct cam_periph *periph;
468 	struct sg_softc   *softc;
469 	struct mtx *mtx;
470 
471 	periph = (struct cam_periph *)dev->si_drv1;
472 	mtx = cam_periph_mtx(periph);
473 	mtx_lock(mtx);
474 
475 	softc = periph->softc;
476 	softc->open_count--;
477 
478 	cam_periph_release_locked(periph);
479 
480 	/*
481 	 * We reference the lock directly here, instead of using
482 	 * cam_periph_unlock().  The reason is that the call to
483 	 * cam_periph_release_locked() above could result in the periph
484 	 * getting freed.  If that is the case, dereferencing the periph
485 	 * with a cam_periph_unlock() call would cause a page fault.
486 	 *
487 	 * cam_periph_release() avoids this problem using the same method,
488 	 * but we're manually acquiring and dropping the lock here to
489 	 * protect the open count and avoid another lock acquisition and
490 	 * release.
491 	 */
492 	mtx_unlock(mtx);
493 
494 	return (0);
495 }
496 
497 static int
498 sgioctl(struct cdev *dev, u_long cmd, caddr_t arg, int flag, struct thread *td)
499 {
500 	union ccb *ccb;
501 	struct ccb_scsiio *csio;
502 	struct cam_periph *periph;
503 	struct sg_softc *softc;
504 	struct sg_io_hdr *req;
505 	int dir, error;
506 
507 	periph = (struct cam_periph *)dev->si_drv1;
508 	cam_periph_lock(periph);
509 
510 	softc = (struct sg_softc *)periph->softc;
511 	error = 0;
512 
513 	switch (cmd) {
514 	case SG_GET_VERSION_NUM:
515 	{
516 		int *version = (int *)arg;
517 
518 		*version = sg_version;
519 		break;
520 	}
521 	case SG_SET_TIMEOUT:
522 	{
523 		u_int user_timeout = *(u_int *)arg;
524 
525 		softc->sg_user_timeout = user_timeout;
526 		softc->sg_timeout = user_timeout / SG_DEFAULT_HZ * hz;
527 		break;
528 	}
529 	case SG_GET_TIMEOUT:
530 		/*
531 		 * The value is returned directly to the syscall.
532 		 */
533 		td->td_retval[0] = softc->sg_user_timeout;
534 		error = 0;
535 		break;
536 	case SG_IO:
537 		req = (struct sg_io_hdr *)arg;
538 
539 		if (req->cmd_len > IOCDBLEN) {
540 			error = EINVAL;
541 			break;
542 		}
543 
544 		if (req->iovec_count != 0) {
545 			error = EOPNOTSUPP;
546 			break;
547 		}
548 
549 		ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL);
550 		csio = &ccb->csio;
551 
552 		error = copyin(req->cmdp, &csio->cdb_io.cdb_bytes,
553 		    req->cmd_len);
554 		if (error) {
555 			xpt_release_ccb(ccb);
556 			break;
557 		}
558 
559 		switch(req->dxfer_direction) {
560 		case SG_DXFER_TO_DEV:
561 			dir = CAM_DIR_OUT;
562 			break;
563 		case SG_DXFER_FROM_DEV:
564 			dir = CAM_DIR_IN;
565 			break;
566 		case SG_DXFER_TO_FROM_DEV:
567 			dir = CAM_DIR_BOTH;
568 			break;
569 		case SG_DXFER_NONE:
570 		default:
571 			dir = CAM_DIR_NONE;
572 			break;
573 		}
574 
575 		cam_fill_csio(csio,
576 			      /*retries*/1,
577 			      /*cbfcnp*/NULL,
578 			      dir|CAM_DEV_QFRZDIS,
579 			      MSG_SIMPLE_Q_TAG,
580 			      req->dxferp,
581 			      req->dxfer_len,
582 			      req->mx_sb_len,
583 			      req->cmd_len,
584 			      req->timeout);
585 
586 		error = sgsendccb(periph, ccb);
587 		if (error) {
588 			req->host_status = DID_ERROR;
589 			req->driver_status = DRIVER_INVALID;
590 			xpt_release_ccb(ccb);
591 			break;
592 		}
593 
594 		req->status = csio->scsi_status;
595 		req->masked_status = (csio->scsi_status >> 1) & 0x7f;
596 		sg_scsiio_status(csio, &req->host_status, &req->driver_status);
597 		req->resid = csio->resid;
598 		req->duration = csio->ccb_h.timeout;
599 		req->info = 0;
600 
601 		if ((csio->ccb_h.status & CAM_AUTOSNS_VALID)
602 		    && (req->sbp != NULL)) {
603 			req->sb_len_wr = req->mx_sb_len - csio->sense_resid;
604 			error = copyout(&csio->sense_data, req->sbp,
605 					req->sb_len_wr);
606 		}
607 
608 		xpt_release_ccb(ccb);
609 		break;
610 
611 	case SG_GET_RESERVED_SIZE:
612 	{
613 		int *size = (int *)arg;
614 		*size = DFLTPHYS;
615 		break;
616 	}
617 
618 	case SG_GET_SCSI_ID:
619 	{
620 		struct sg_scsi_id *id = (struct sg_scsi_id *)arg;
621 
622 		id->host_no = cam_sim_path(xpt_path_sim(periph->path));
623 		id->channel = xpt_path_path_id(periph->path);
624 		id->scsi_id = xpt_path_target_id(periph->path);
625 		id->lun = xpt_path_lun_id(periph->path);
626 		id->scsi_type = softc->pd_type;
627 		id->h_cmd_per_lun = 1;
628 		id->d_queue_depth = 1;
629 		id->unused[0] = 0;
630 		id->unused[1] = 0;
631 		break;
632 	}
633 
634 	case SG_GET_SG_TABLESIZE:
635 	{
636 		int *size = (int *)arg;
637 		*size = 0;
638 		break;
639 	}
640 
641 	case SG_EMULATED_HOST:
642 	case SG_SET_TRANSFORM:
643 	case SG_GET_TRANSFORM:
644 	case SG_GET_NUM_WAITING:
645 	case SG_SCSI_RESET:
646 	case SG_GET_REQUEST_TABLE:
647 	case SG_SET_KEEP_ORPHAN:
648 	case SG_GET_KEEP_ORPHAN:
649 	case SG_GET_ACCESS_COUNT:
650 	case SG_SET_FORCE_LOW_DMA:
651 	case SG_GET_LOW_DMA:
652 	case SG_SET_FORCE_PACK_ID:
653 	case SG_GET_PACK_ID:
654 	case SG_SET_RESERVED_SIZE:
655 	case SG_GET_COMMAND_Q:
656 	case SG_SET_COMMAND_Q:
657 	case SG_SET_DEBUG:
658 	case SG_NEXT_CMD_LEN:
659 	default:
660 #ifdef CAMDEBUG
661 		printf("sgioctl: rejecting cmd 0x%lx\n", cmd);
662 #endif
663 		error = ENODEV;
664 		break;
665 	}
666 
667 	cam_periph_unlock(periph);
668 	return (error);
669 }
670 
671 static int
672 sgwrite(struct cdev *dev, struct uio *uio, int ioflag)
673 {
674 	union ccb *ccb;
675 	struct cam_periph *periph;
676 	struct ccb_scsiio *csio;
677 	struct sg_softc *sc;
678 	struct sg_header *hdr;
679 	struct sg_rdwr *rdwr;
680 	u_char cdb_cmd;
681 	char *buf;
682 	int error = 0, cdb_len, buf_len, dir;
683 
684 	periph = dev->si_drv1;
685 	rdwr = malloc(sizeof(*rdwr), M_DEVBUF, M_WAITOK | M_ZERO);
686 	hdr = &rdwr->hdr.hdr;
687 
688 	/* Copy in the header block and sanity check it */
689 	if (uio->uio_resid < sizeof(*hdr)) {
690 		error = EINVAL;
691 		goto out_hdr;
692 	}
693 	error = uiomove(hdr, sizeof(*hdr), uio);
694 	if (error)
695 		goto out_hdr;
696 
697 	/* XXX: We don't support SG 3.x read/write API. */
698 	if (hdr->reply_len < 0) {
699 		error = ENODEV;
700 		goto out_hdr;
701 	}
702 
703 	ccb = xpt_alloc_ccb();
704 	if (ccb == NULL) {
705 		error = ENOMEM;
706 		goto out_hdr;
707 	}
708 	csio = &ccb->csio;
709 
710 	/*
711 	 * Copy in the CDB block.  The designers of the interface didn't
712 	 * bother to provide a size for this in the header, so we have to
713 	 * figure it out ourselves.
714 	 */
715 	if (uio->uio_resid < 1)
716 		goto out_ccb;
717 	error = uiomove(&cdb_cmd, 1, uio);
718 	if (error)
719 		goto out_ccb;
720 	if (hdr->twelve_byte)
721 		cdb_len = 12;
722 	else
723 		cdb_len = scsi_group_len(cdb_cmd);
724 	/*
725 	 * We've already read the first byte of the CDB and advanced the uio
726 	 * pointer.  Just read the rest.
727 	 */
728 	csio->cdb_io.cdb_bytes[0] = cdb_cmd;
729 	error = uiomove(&csio->cdb_io.cdb_bytes[1], cdb_len - 1, uio);
730 	if (error)
731 		goto out_ccb;
732 
733 	/*
734 	 * Now set up the data block.  Again, the designers didn't bother
735 	 * to make this reliable.
736 	 */
737 	buf_len = uio->uio_resid;
738 	if (buf_len != 0) {
739 		buf = malloc(buf_len, M_DEVBUF, M_WAITOK | M_ZERO);
740 		error = uiomove(buf, buf_len, uio);
741 		if (error)
742 			goto out_buf;
743 		dir = CAM_DIR_OUT;
744 	} else if (hdr->reply_len != 0) {
745 		buf = malloc(hdr->reply_len, M_DEVBUF, M_WAITOK | M_ZERO);
746 		buf_len = hdr->reply_len;
747 		dir = CAM_DIR_IN;
748 	} else {
749 		buf = NULL;
750 		buf_len = 0;
751 		dir = CAM_DIR_NONE;
752 	}
753 
754 	cam_periph_lock(periph);
755 	sc = periph->softc;
756 	xpt_setup_ccb(&ccb->ccb_h, periph->path, CAM_PRIORITY_NORMAL);
757 	cam_fill_csio(csio,
758 		      /*retries*/1,
759 		      sgdone,
760 		      dir|CAM_DEV_QFRZDIS,
761 		      MSG_SIMPLE_Q_TAG,
762 		      buf,
763 		      buf_len,
764 		      SG_MAX_SENSE,
765 		      cdb_len,
766 		      sc->sg_timeout);
767 
768 	/*
769 	 * Send off the command and hope that it works. This path does not
770 	 * go through sgstart because the I/O is supposed to be asynchronous.
771 	 */
772 	rdwr->buf = buf;
773 	rdwr->buf_len = buf_len;
774 	rdwr->tag = hdr->pack_id;
775 	rdwr->ccb = ccb;
776 	rdwr->state = SG_RDWR_INPROG;
777 	ccb->ccb_h.ccb_rdwr = rdwr;
778 	ccb->ccb_h.ccb_type = SG_CCB_RDWR_IO;
779 	TAILQ_INSERT_TAIL(&sc->rdwr_done, rdwr, rdwr_link);
780 	error = sgsendrdwr(periph, ccb);
781 	cam_periph_unlock(periph);
782 	return (error);
783 
784 out_buf:
785 	free(buf, M_DEVBUF);
786 out_ccb:
787 	xpt_free_ccb(ccb);
788 out_hdr:
789 	free(rdwr, M_DEVBUF);
790 	return (error);
791 }
792 
793 static int
794 sgread(struct cdev *dev, struct uio *uio, int ioflag)
795 {
796 	struct ccb_scsiio *csio;
797 	struct cam_periph *periph;
798 	struct sg_softc *sc;
799 	struct sg_header *hdr;
800 	struct sg_rdwr *rdwr;
801 	u_short hstat, dstat;
802 	int error, pack_len, reply_len, pack_id;
803 
804 	periph = dev->si_drv1;
805 
806 	/* XXX The pack len field needs to be updated and written out instead
807 	 * of discarded.  Not sure how to do that.
808 	 */
809 	uio->uio_rw = UIO_WRITE;
810 	if ((error = uiomove(&pack_len, 4, uio)) != 0)
811 		return (error);
812 	if ((error = uiomove(&reply_len, 4, uio)) != 0)
813 		return (error);
814 	if ((error = uiomove(&pack_id, 4, uio)) != 0)
815 		return (error);
816 	uio->uio_rw = UIO_READ;
817 
818 	cam_periph_lock(periph);
819 	sc = periph->softc;
820 search:
821 	TAILQ_FOREACH(rdwr, &sc->rdwr_done, rdwr_link) {
822 		if (rdwr->tag == pack_id)
823 			break;
824 	}
825 	if ((rdwr == NULL) || (rdwr->state != SG_RDWR_DONE)) {
826 		if (cam_periph_sleep(periph, rdwr, PCATCH, "sgread", 0) == ERESTART)
827 			return (EAGAIN);
828 		goto search;
829 	}
830 	TAILQ_REMOVE(&sc->rdwr_done, rdwr, rdwr_link);
831 	cam_periph_unlock(periph);
832 
833 	hdr = &rdwr->hdr.hdr;
834 	csio = &rdwr->ccb->csio;
835 	sg_scsiio_status(csio, &hstat, &dstat);
836 	hdr->host_status = hstat;
837 	hdr->driver_status = dstat;
838 	hdr->target_status = csio->scsi_status >> 1;
839 
840 	switch (hstat) {
841 	case DID_OK:
842 	case DID_PASSTHROUGH:
843 	case DID_SOFT_ERROR:
844 		hdr->result = 0;
845 		break;
846 	case DID_NO_CONNECT:
847 	case DID_BUS_BUSY:
848 	case DID_TIME_OUT:
849 		hdr->result = EBUSY;
850 		break;
851 	case DID_BAD_TARGET:
852 	case DID_ABORT:
853 	case DID_PARITY:
854 	case DID_RESET:
855 	case DID_BAD_INTR:
856 	case DID_ERROR:
857 	default:
858 		hdr->result = EIO;
859 		break;
860 	}
861 
862 	if (dstat == DRIVER_SENSE) {
863 		bcopy(&csio->sense_data, hdr->sense_buffer,
864 		      min(csio->sense_len, SG_MAX_SENSE));
865 #ifdef CAMDEBUG
866 		scsi_sense_print(csio);
867 #endif
868 	}
869 
870 	error = uiomove(&hdr->result, sizeof(*hdr) -
871 			offsetof(struct sg_header, result), uio);
872 	if ((error == 0) && (hdr->result == 0))
873 		error = uiomove(rdwr->buf, rdwr->buf_len, uio);
874 
875 	cam_periph_lock(periph);
876 	xpt_free_ccb(rdwr->ccb);
877 	cam_periph_unlock(periph);
878 	free(rdwr->buf, M_DEVBUF);
879 	free(rdwr, M_DEVBUF);
880 	return (error);
881 }
882 
883 static int
884 sgsendccb(struct cam_periph *periph, union ccb *ccb)
885 {
886 	struct sg_softc *softc;
887 	struct cam_periph_map_info mapinfo;
888 	int error;
889 
890 	softc = periph->softc;
891 	bzero(&mapinfo, sizeof(mapinfo));
892 
893 	/*
894 	 * cam_periph_mapmem calls into proc and vm functions that can
895 	 * sleep as well as trigger I/O, so we can't hold the lock.
896 	 * Dropping it here is reasonably safe.
897 	 * The only CCB opcode that is possible here is XPT_SCSI_IO, no
898 	 * need for additional checks.
899 	 */
900 	cam_periph_unlock(periph);
901 	error = cam_periph_mapmem(ccb, &mapinfo, softc->maxio);
902 	cam_periph_lock(periph);
903 	if (error)
904 		return (error);
905 
906 	error = cam_periph_runccb(ccb,
907 				  sgerror,
908 				  CAM_RETRY_SELTO,
909 				  SF_RETRY_UA,
910 				  softc->device_stats);
911 
912 	cam_periph_unlock(periph);
913 	cam_periph_unmapmem(ccb, &mapinfo);
914 	cam_periph_lock(periph);
915 
916 	return (error);
917 }
918 
919 static int
920 sgsendrdwr(struct cam_periph *periph, union ccb *ccb)
921 {
922 	struct sg_softc *softc;
923 
924 	softc = periph->softc;
925 	devstat_start_transaction(softc->device_stats, NULL);
926 	xpt_action(ccb);
927 	return (0);
928 }
929 
930 static int
931 sgerror(union ccb *ccb, uint32_t cam_flags, uint32_t sense_flags)
932 {
933 
934 	return (cam_periph_error(ccb, cam_flags, sense_flags));
935 }
936 
937 static void
938 sg_scsiio_status(struct ccb_scsiio *csio, u_short *hoststat, u_short *drvstat)
939 {
940 	int status;
941 
942 	status = csio->ccb_h.status;
943 
944 	switch (status & CAM_STATUS_MASK) {
945 	case CAM_REQ_CMP:
946 		*hoststat = DID_OK;
947 		*drvstat = 0;
948 		break;
949 	case CAM_REQ_CMP_ERR:
950 		*hoststat = DID_ERROR;
951 		*drvstat = 0;
952 		break;
953 	case CAM_REQ_ABORTED:
954 		*hoststat = DID_ABORT;
955 		*drvstat = 0;
956 		break;
957 	case CAM_REQ_INVALID:
958 		*hoststat = DID_ERROR;
959 		*drvstat = DRIVER_INVALID;
960 		break;
961 	case CAM_DEV_NOT_THERE:
962 		*hoststat = DID_BAD_TARGET;
963 		*drvstat = 0;
964 		break;
965 	case CAM_SEL_TIMEOUT:
966 		*hoststat = DID_NO_CONNECT;
967 		*drvstat = 0;
968 		break;
969 	case CAM_CMD_TIMEOUT:
970 		*hoststat = DID_TIME_OUT;
971 		*drvstat = 0;
972 		break;
973 	case CAM_SCSI_STATUS_ERROR:
974 		*hoststat = DID_ERROR;
975 		*drvstat = 0;
976 		break;
977 	case CAM_SCSI_BUS_RESET:
978 		*hoststat = DID_RESET;
979 		*drvstat = 0;
980 		break;
981 	case CAM_UNCOR_PARITY:
982 		*hoststat = DID_PARITY;
983 		*drvstat = 0;
984 		break;
985 	case CAM_SCSI_BUSY:
986 		*hoststat = DID_BUS_BUSY;
987 		*drvstat = 0;
988 		break;
989 	default:
990 		*hoststat = DID_ERROR;
991 		*drvstat = DRIVER_ERROR;
992 	}
993 
994 	if (status & CAM_AUTOSNS_VALID)
995 		*drvstat = DRIVER_SENSE;
996 }
997 
998 static int
999 scsi_group_len(u_char cmd)
1000 {
1001 	int len[] = {6, 10, 10, 12, 12, 12, 10, 10};
1002 	int group;
1003 
1004 	group = (cmd >> 5) & 0x7;
1005 	return (len[group]);
1006 }
1007