xref: /freebsd/sys/cam/scsi/scsi_sg.c (revision 6b129086dcee14496517fae085b448e3edc69bc7)
1 /*-
2  * Copyright (c) 2007 Scott Long
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions, and the following disclaimer,
10  *    without modification, immediately at the beginning of the file.
11  * 2. The name of the author may not be used to endorse or promote products
12  *    derived from this software without specific prior written permission.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
18  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24  * SUCH DAMAGE.
25  */
26 
27 /*
28  * scsi_sg peripheral driver.  This driver is meant to implement the Linux
29  * SG passthrough interface for SCSI.
30  */
31 
32 #include <sys/cdefs.h>
33 __FBSDID("$FreeBSD$");
34 
35 #include <sys/param.h>
36 #include <sys/systm.h>
37 #include <sys/kernel.h>
38 #include <sys/types.h>
39 #include <sys/bio.h>
40 #include <sys/malloc.h>
41 #include <sys/fcntl.h>
42 #include <sys/ioccom.h>
43 #include <sys/conf.h>
44 #include <sys/errno.h>
45 #include <sys/devicestat.h>
46 #include <sys/proc.h>
47 #include <sys/uio.h>
48 
49 #include <cam/cam.h>
50 #include <cam/cam_ccb.h>
51 #include <cam/cam_periph.h>
52 #include <cam/cam_queue.h>
53 #include <cam/cam_xpt_periph.h>
54 #include <cam/cam_debug.h>
55 #include <cam/cam_sim.h>
56 
57 #include <cam/scsi/scsi_all.h>
58 #include <cam/scsi/scsi_message.h>
59 #include <cam/scsi/scsi_sg.h>
60 
61 #include <compat/linux/linux_ioctl.h>
62 
63 typedef enum {
64 	SG_FLAG_LOCKED		= 0x01,
65 	SG_FLAG_INVALID		= 0x02
66 } sg_flags;
67 
68 typedef enum {
69 	SG_STATE_NORMAL
70 } sg_state;
71 
72 typedef enum {
73 	SG_RDWR_FREE,
74 	SG_RDWR_INPROG,
75 	SG_RDWR_DONE
76 } sg_rdwr_state;
77 
78 typedef enum {
79 	SG_CCB_RDWR_IO
80 } sg_ccb_types;
81 
82 #define ccb_type	ppriv_field0
83 #define ccb_rdwr	ppriv_ptr1
84 
85 struct sg_rdwr {
86 	TAILQ_ENTRY(sg_rdwr)	rdwr_link;
87 	int			tag;
88 	int			state;
89 	int			buf_len;
90 	char			*buf;
91 	union ccb		*ccb;
92 	union {
93 		struct sg_header hdr;
94 		struct sg_io_hdr io_hdr;
95 	} hdr;
96 };
97 
98 struct sg_softc {
99 	sg_state		state;
100 	sg_flags		flags;
101 	int			open_count;
102 	struct devstat		*device_stats;
103 	TAILQ_HEAD(, sg_rdwr)	rdwr_done;
104 	struct cdev		*dev;
105 	int			sg_timeout;
106 	int			sg_user_timeout;
107 	uint8_t			pd_type;
108 	union ccb		saved_ccb;
109 };
110 
111 static d_open_t		sgopen;
112 static d_close_t	sgclose;
113 static d_ioctl_t	sgioctl;
114 static d_write_t	sgwrite;
115 static d_read_t		sgread;
116 
117 static periph_init_t	sginit;
118 static periph_ctor_t	sgregister;
119 static periph_oninv_t	sgoninvalidate;
120 static periph_dtor_t	sgcleanup;
121 static void		sgasync(void *callback_arg, uint32_t code,
122 				struct cam_path *path, void *arg);
123 static void		sgdone(struct cam_periph *periph, union ccb *done_ccb);
124 static int		sgsendccb(struct cam_periph *periph, union ccb *ccb);
125 static int		sgsendrdwr(struct cam_periph *periph, union ccb *ccb);
126 static int		sgerror(union ccb *ccb, uint32_t cam_flags,
127 				uint32_t sense_flags);
128 static void		sg_scsiio_status(struct ccb_scsiio *csio,
129 					 u_short *hoststat, u_short *drvstat);
130 
131 static int		scsi_group_len(u_char cmd);
132 
133 static struct periph_driver sgdriver =
134 {
135 	sginit, "sg",
136 	TAILQ_HEAD_INITIALIZER(sgdriver.units), /* gen */ 0
137 };
138 PERIPHDRIVER_DECLARE(sg, sgdriver);
139 
140 static struct cdevsw sg_cdevsw = {
141 	.d_version =	D_VERSION,
142 	.d_flags =	D_NEEDGIANT | D_TRACKCLOSE,
143 	.d_open =	sgopen,
144 	.d_close =	sgclose,
145 	.d_ioctl =	sgioctl,
146 	.d_write =	sgwrite,
147 	.d_read =	sgread,
148 	.d_name =	"sg",
149 };
150 
151 static int sg_version = 30125;
152 
153 static void
154 sginit(void)
155 {
156 	cam_status status;
157 
158 	/*
159 	 * Install a global async callback.  This callback will receive aync
160 	 * callbacks like "new device found".
161 	 */
162 	status = xpt_register_async(AC_FOUND_DEVICE, sgasync, NULL, NULL);
163 
164 	if (status != CAM_REQ_CMP) {
165 		printf("sg: Failed to attach master async callbac "
166 			"due to status 0x%x!\n", status);
167 	}
168 }
169 
170 static void
171 sgdevgonecb(void *arg)
172 {
173 	struct cam_periph *periph;
174 	struct sg_softc *softc;
175 	struct mtx *mtx;
176 	int i;
177 
178 	periph = (struct cam_periph *)arg;
179 	mtx = cam_periph_mtx(periph);
180 	mtx_lock(mtx);
181 
182 	softc = (struct sg_softc *)periph->softc;
183 	KASSERT(softc->open_count >= 0, ("Negative open count %d",
184 		softc->open_count));
185 
186 	/*
187 	 * When we get this callback, we will get no more close calls from
188 	 * devfs.  So if we have any dangling opens, we need to release the
189 	 * reference held for that particular context.
190 	 */
191 	for (i = 0; i < softc->open_count; i++)
192 		cam_periph_release_locked(periph);
193 
194 	softc->open_count = 0;
195 
196 	/*
197 	 * Release the reference held for the device node, it is gone now.
198 	 */
199 	cam_periph_release_locked(periph);
200 
201 	/*
202 	 * We reference the lock directly here, instead of using
203 	 * cam_periph_unlock().  The reason is that the final call to
204 	 * cam_periph_release_locked() above could result in the periph
205 	 * getting freed.  If that is the case, dereferencing the periph
206 	 * with a cam_periph_unlock() call would cause a page fault.
207 	 */
208 	mtx_unlock(mtx);
209 }
210 
211 
212 static void
213 sgoninvalidate(struct cam_periph *periph)
214 {
215 	struct sg_softc *softc;
216 
217 	softc = (struct sg_softc *)periph->softc;
218 
219 	/*
220 	 * Deregister any async callbacks.
221 	 */
222 	xpt_register_async(0, sgasync, periph, periph->path);
223 
224 	softc->flags |= SG_FLAG_INVALID;
225 
226 	/*
227 	 * Tell devfs this device has gone away, and ask for a callback
228 	 * when it has cleaned up its state.
229 	 */
230 	destroy_dev_sched_cb(softc->dev, sgdevgonecb, periph);
231 
232 	/*
233 	 * XXX Return all queued I/O with ENXIO.
234 	 * XXX Handle any transactions queued to the card
235 	 *     with XPT_ABORT_CCB.
236 	 */
237 
238 }
239 
240 static void
241 sgcleanup(struct cam_periph *periph)
242 {
243 	struct sg_softc *softc;
244 
245 	softc = (struct sg_softc *)periph->softc;
246 
247 	devstat_remove_entry(softc->device_stats);
248 
249 	free(softc, M_DEVBUF);
250 }
251 
252 static void
253 sgasync(void *callback_arg, uint32_t code, struct cam_path *path, void *arg)
254 {
255 	struct cam_periph *periph;
256 
257 	periph = (struct cam_periph *)callback_arg;
258 
259 	switch (code) {
260 	case AC_FOUND_DEVICE:
261 	{
262 		struct ccb_getdev *cgd;
263 		cam_status status;
264 
265 		cgd = (struct ccb_getdev *)arg;
266 		if (cgd == NULL)
267 			break;
268 
269 		if (cgd->protocol != PROTO_SCSI)
270 			break;
271 
272 		/*
273 		 * Allocate a peripheral instance for this device and
274 		 * start the probe process.
275 		 */
276 		status = cam_periph_alloc(sgregister, sgoninvalidate,
277 					  sgcleanup, NULL, "sg",
278 					  CAM_PERIPH_BIO, path,
279 					  sgasync, AC_FOUND_DEVICE, cgd);
280 		if ((status != CAM_REQ_CMP) && (status != CAM_REQ_INPROG)) {
281 			const struct cam_status_entry *entry;
282 
283 			entry = cam_fetch_status_entry(status);
284 			printf("sgasync: Unable to attach new device "
285 				"due to status %#x: %s\n", status, entry ?
286 				entry->status_text : "Unknown");
287 		}
288 		break;
289 	}
290 	default:
291 		cam_periph_async(periph, code, path, arg);
292 		break;
293 	}
294 }
295 
296 static cam_status
297 sgregister(struct cam_periph *periph, void *arg)
298 {
299 	struct sg_softc *softc;
300 	struct ccb_getdev *cgd;
301 	struct ccb_pathinq cpi;
302 	int no_tags;
303 
304 	cgd = (struct ccb_getdev *)arg;
305 	if (cgd == NULL) {
306 		printf("sgregister: no getdev CCB, can't register device\n");
307 		return (CAM_REQ_CMP_ERR);
308 	}
309 
310 	softc = malloc(sizeof(*softc), M_DEVBUF, M_ZERO | M_NOWAIT);
311 	if (softc == NULL) {
312 		printf("sgregister: Unable to allocate softc\n");
313 		return (CAM_REQ_CMP_ERR);
314 	}
315 
316 	softc->state = SG_STATE_NORMAL;
317 	softc->pd_type = SID_TYPE(&cgd->inq_data);
318 	softc->sg_timeout = SG_DEFAULT_TIMEOUT / SG_DEFAULT_HZ * hz;
319 	softc->sg_user_timeout = SG_DEFAULT_TIMEOUT;
320 	TAILQ_INIT(&softc->rdwr_done);
321 	periph->softc = softc;
322 
323 	bzero(&cpi, sizeof(cpi));
324 	xpt_setup_ccb(&cpi.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
325 	cpi.ccb_h.func_code = XPT_PATH_INQ;
326 	xpt_action((union ccb *)&cpi);
327 
328 	/*
329 	 * We pass in 0 for all blocksize, since we don't know what the
330 	 * blocksize of the device is, if it even has a blocksize.
331 	 */
332 	cam_periph_unlock(periph);
333 	no_tags = (cgd->inq_data.flags & SID_CmdQue) == 0;
334 	softc->device_stats = devstat_new_entry("sg",
335 			periph->unit_number, 0,
336 			DEVSTAT_NO_BLOCKSIZE
337 			| (no_tags ? DEVSTAT_NO_ORDERED_TAGS : 0),
338 			softc->pd_type |
339 			XPORT_DEVSTAT_TYPE(cpi.transport) |
340 			DEVSTAT_TYPE_PASS,
341 			DEVSTAT_PRIORITY_PASS);
342 
343 	/*
344 	 * Acquire a reference to the periph before we create the devfs
345 	 * instance for it.  We'll release this reference once the devfs
346 	 * instance has been freed.
347 	 */
348 	if (cam_periph_acquire(periph) != CAM_REQ_CMP) {
349 		xpt_print(periph->path, "%s: lost periph during "
350 			  "registration!\n", __func__);
351 		cam_periph_lock(periph);
352 		return (CAM_REQ_CMP_ERR);
353 	}
354 
355 	/* Register the device */
356 	softc->dev = make_dev(&sg_cdevsw, periph->unit_number,
357 			      UID_ROOT, GID_OPERATOR, 0600, "%s%d",
358 			      periph->periph_name, periph->unit_number);
359 	if (periph->unit_number < 26) {
360 		(void)make_dev_alias(softc->dev, "sg%c",
361 		    periph->unit_number + 'a');
362 	} else {
363 		(void)make_dev_alias(softc->dev, "sg%c%c",
364 		    ((periph->unit_number / 26) - 1) + 'a',
365 		    (periph->unit_number % 26) + 'a');
366 	}
367 	cam_periph_lock(periph);
368 	softc->dev->si_drv1 = periph;
369 
370 	/*
371 	 * Add as async callback so that we get
372 	 * notified if this device goes away.
373 	 */
374 	xpt_register_async(AC_LOST_DEVICE, sgasync, periph, periph->path);
375 
376 	if (bootverbose)
377 		xpt_announce_periph(periph, NULL);
378 
379 	return (CAM_REQ_CMP);
380 }
381 
382 static void
383 sgdone(struct cam_periph *periph, union ccb *done_ccb)
384 {
385 	struct sg_softc *softc;
386 	struct ccb_scsiio *csio;
387 
388 	softc = (struct sg_softc *)periph->softc;
389 	csio = &done_ccb->csio;
390 	switch (csio->ccb_h.ccb_type) {
391 	case SG_CCB_RDWR_IO:
392 	{
393 		struct sg_rdwr *rdwr;
394 		int state;
395 
396 		devstat_end_transaction(softc->device_stats,
397 					csio->dxfer_len,
398 					csio->tag_action & 0xf,
399 					((csio->ccb_h.flags & CAM_DIR_MASK) ==
400 					CAM_DIR_NONE) ? DEVSTAT_NO_DATA :
401 					(csio->ccb_h.flags & CAM_DIR_OUT) ?
402 					DEVSTAT_WRITE : DEVSTAT_READ,
403 					NULL, NULL);
404 
405 		rdwr = done_ccb->ccb_h.ccb_rdwr;
406 		state = rdwr->state;
407 		rdwr->state = SG_RDWR_DONE;
408 		wakeup(rdwr);
409 		break;
410 	}
411 	default:
412 		panic("unknown sg CCB type");
413 	}
414 }
415 
416 static int
417 sgopen(struct cdev *dev, int flags, int fmt, struct thread *td)
418 {
419 	struct cam_periph *periph;
420 	struct sg_softc *softc;
421 	int error = 0;
422 
423 	periph = (struct cam_periph *)dev->si_drv1;
424 	if (periph == NULL)
425 		return (ENXIO);
426 
427 	if (cam_periph_acquire(periph) != CAM_REQ_CMP)
428 		return (ENXIO);
429 
430 	/*
431 	 * Don't allow access when we're running at a high securelevel.
432 	 */
433 	error = securelevel_gt(td->td_ucred, 1);
434 	if (error) {
435 		cam_periph_release(periph);
436 		return (error);
437 	}
438 
439 	cam_periph_lock(periph);
440 
441 	softc = (struct sg_softc *)periph->softc;
442 	if (softc->flags & SG_FLAG_INVALID) {
443 		cam_periph_release_locked(periph);
444 		cam_periph_unlock(periph);
445 		return (ENXIO);
446 	}
447 
448 	softc->open_count++;
449 
450 	cam_periph_unlock(periph);
451 
452 	return (error);
453 }
454 
455 static int
456 sgclose(struct cdev *dev, int flag, int fmt, struct thread *td)
457 {
458 	struct cam_periph *periph;
459 	struct sg_softc   *softc;
460 	struct mtx *mtx;
461 
462 	periph = (struct cam_periph *)dev->si_drv1;
463 	if (periph == NULL)
464 		return (ENXIO);
465 	mtx = cam_periph_mtx(periph);
466 	mtx_lock(mtx);
467 
468 	softc = periph->softc;
469 	softc->open_count--;
470 
471 	cam_periph_release_locked(periph);
472 
473 	/*
474 	 * We reference the lock directly here, instead of using
475 	 * cam_periph_unlock().  The reason is that the call to
476 	 * cam_periph_release_locked() above could result in the periph
477 	 * getting freed.  If that is the case, dereferencing the periph
478 	 * with a cam_periph_unlock() call would cause a page fault.
479 	 *
480 	 * cam_periph_release() avoids this problem using the same method,
481 	 * but we're manually acquiring and dropping the lock here to
482 	 * protect the open count and avoid another lock acquisition and
483 	 * release.
484 	 */
485 	mtx_unlock(mtx);
486 
487 	return (0);
488 }
489 
490 static int
491 sgioctl(struct cdev *dev, u_long cmd, caddr_t arg, int flag, struct thread *td)
492 {
493 	union ccb *ccb;
494 	struct ccb_scsiio *csio;
495 	struct cam_periph *periph;
496 	struct sg_softc *softc;
497 	struct sg_io_hdr *req;
498 	int dir, error;
499 
500 	periph = (struct cam_periph *)dev->si_drv1;
501 	if (periph == NULL)
502 		return (ENXIO);
503 
504 	cam_periph_lock(periph);
505 
506 	softc = (struct sg_softc *)periph->softc;
507 	error = 0;
508 
509 	switch (cmd) {
510 	case SG_GET_VERSION_NUM:
511 	{
512 		int *version = (int *)arg;
513 
514 		*version = sg_version;
515 		break;
516 	}
517 	case SG_SET_TIMEOUT:
518 	{
519 		u_int user_timeout = *(u_int *)arg;
520 
521 		softc->sg_user_timeout = user_timeout;
522 		softc->sg_timeout = user_timeout / SG_DEFAULT_HZ * hz;
523 		break;
524 	}
525 	case SG_GET_TIMEOUT:
526 		/*
527 		 * The value is returned directly to the syscall.
528 		 */
529 		td->td_retval[0] = softc->sg_user_timeout;
530 		error = 0;
531 		break;
532 	case SG_IO:
533 		req = (struct sg_io_hdr *)arg;
534 
535 		if (req->cmd_len > IOCDBLEN) {
536 			error = EINVAL;
537 			break;
538 		}
539 
540 		if (req->iovec_count != 0) {
541 			error = EOPNOTSUPP;
542 			break;
543 		}
544 
545 		ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL);
546 		csio = &ccb->csio;
547 
548 		error = copyin(req->cmdp, &csio->cdb_io.cdb_bytes,
549 		    req->cmd_len);
550 		if (error) {
551 			xpt_release_ccb(ccb);
552 			break;
553 		}
554 
555 		switch(req->dxfer_direction) {
556 		case SG_DXFER_TO_DEV:
557 			dir = CAM_DIR_OUT;
558 			break;
559 		case SG_DXFER_FROM_DEV:
560 			dir = CAM_DIR_IN;
561 			break;
562 		case SG_DXFER_TO_FROM_DEV:
563 			dir = CAM_DIR_IN | CAM_DIR_OUT;
564 			break;
565 		case SG_DXFER_NONE:
566 		default:
567 			dir = CAM_DIR_NONE;
568 			break;
569 		}
570 
571 		cam_fill_csio(csio,
572 			      /*retries*/1,
573 			      sgdone,
574 			      dir|CAM_DEV_QFRZDIS,
575 			      MSG_SIMPLE_Q_TAG,
576 			      req->dxferp,
577 			      req->dxfer_len,
578 			      req->mx_sb_len,
579 			      req->cmd_len,
580 			      req->timeout);
581 
582 		error = sgsendccb(periph, ccb);
583 		if (error) {
584 			req->host_status = DID_ERROR;
585 			req->driver_status = DRIVER_INVALID;
586 			xpt_release_ccb(ccb);
587 			break;
588 		}
589 
590 		req->status = csio->scsi_status;
591 		req->masked_status = (csio->scsi_status >> 1) & 0x7f;
592 		sg_scsiio_status(csio, &req->host_status, &req->driver_status);
593 		req->resid = csio->resid;
594 		req->duration = csio->ccb_h.timeout;
595 		req->info = 0;
596 
597 		if ((csio->ccb_h.status & CAM_AUTOSNS_VALID)
598 		    && (req->sbp != NULL)) {
599 			req->sb_len_wr = req->mx_sb_len - csio->sense_resid;
600 			error = copyout(&csio->sense_data, req->sbp,
601 					req->sb_len_wr);
602 		}
603 
604 		xpt_release_ccb(ccb);
605 		break;
606 
607 	case SG_GET_RESERVED_SIZE:
608 	{
609 		int *size = (int *)arg;
610 		*size = DFLTPHYS;
611 		break;
612 	}
613 
614 	case SG_GET_SCSI_ID:
615 	{
616 		struct sg_scsi_id *id = (struct sg_scsi_id *)arg;
617 
618 		id->host_no = cam_sim_path(xpt_path_sim(periph->path));
619 		id->channel = xpt_path_path_id(periph->path);
620 		id->scsi_id = xpt_path_target_id(periph->path);
621 		id->lun = xpt_path_lun_id(periph->path);
622 		id->scsi_type = softc->pd_type;
623 		id->h_cmd_per_lun = 1;
624 		id->d_queue_depth = 1;
625 		id->unused[0] = 0;
626 		id->unused[1] = 0;
627 		break;
628 	}
629 
630 	case SG_GET_SG_TABLESIZE:
631 	{
632 		int *size = (int *)arg;
633 		*size = 0;
634 		break;
635 	}
636 
637 	case SG_EMULATED_HOST:
638 	case SG_SET_TRANSFORM:
639 	case SG_GET_TRANSFORM:
640 	case SG_GET_NUM_WAITING:
641 	case SG_SCSI_RESET:
642 	case SG_GET_REQUEST_TABLE:
643 	case SG_SET_KEEP_ORPHAN:
644 	case SG_GET_KEEP_ORPHAN:
645 	case SG_GET_ACCESS_COUNT:
646 	case SG_SET_FORCE_LOW_DMA:
647 	case SG_GET_LOW_DMA:
648 	case SG_SET_FORCE_PACK_ID:
649 	case SG_GET_PACK_ID:
650 	case SG_SET_RESERVED_SIZE:
651 	case SG_GET_COMMAND_Q:
652 	case SG_SET_COMMAND_Q:
653 	case SG_SET_DEBUG:
654 	case SG_NEXT_CMD_LEN:
655 	default:
656 #ifdef CAMDEBUG
657 		printf("sgioctl: rejecting cmd 0x%lx\n", cmd);
658 #endif
659 		error = ENODEV;
660 		break;
661 	}
662 
663 	cam_periph_unlock(periph);
664 	return (error);
665 }
666 
667 static int
668 sgwrite(struct cdev *dev, struct uio *uio, int ioflag)
669 {
670 	union ccb *ccb;
671 	struct cam_periph *periph;
672 	struct ccb_scsiio *csio;
673 	struct sg_softc *sc;
674 	struct sg_header *hdr;
675 	struct sg_rdwr *rdwr;
676 	u_char cdb_cmd;
677 	char *buf;
678 	int error = 0, cdb_len, buf_len, dir;
679 
680 	periph = dev->si_drv1;
681 	rdwr = malloc(sizeof(*rdwr), M_DEVBUF, M_WAITOK | M_ZERO);
682 	hdr = &rdwr->hdr.hdr;
683 
684 	/* Copy in the header block and sanity check it */
685 	if (uio->uio_resid < sizeof(*hdr)) {
686 		error = EINVAL;
687 		goto out_hdr;
688 	}
689 	error = uiomove(hdr, sizeof(*hdr), uio);
690 	if (error)
691 		goto out_hdr;
692 
693 	/* XXX: We don't support SG 3.x read/write API. */
694 	if (hdr->reply_len < 0) {
695 		error = ENODEV;
696 		goto out_hdr;
697 	}
698 
699 	ccb = xpt_alloc_ccb();
700 	if (ccb == NULL) {
701 		error = ENOMEM;
702 		goto out_hdr;
703 	}
704 	csio = &ccb->csio;
705 
706 	/*
707 	 * Copy in the CDB block.  The designers of the interface didn't
708 	 * bother to provide a size for this in the header, so we have to
709 	 * figure it out ourselves.
710 	 */
711 	if (uio->uio_resid < 1)
712 		goto out_ccb;
713 	error = uiomove(&cdb_cmd, 1, uio);
714 	if (error)
715 		goto out_ccb;
716 	if (hdr->twelve_byte)
717 		cdb_len = 12;
718 	else
719 		cdb_len = scsi_group_len(cdb_cmd);
720 	/*
721 	 * We've already read the first byte of the CDB and advanced the uio
722 	 * pointer.  Just read the rest.
723 	 */
724 	csio->cdb_io.cdb_bytes[0] = cdb_cmd;
725 	error = uiomove(&csio->cdb_io.cdb_bytes[1], cdb_len - 1, uio);
726 	if (error)
727 		goto out_ccb;
728 
729 	/*
730 	 * Now set up the data block.  Again, the designers didn't bother
731 	 * to make this reliable.
732 	 */
733 	buf_len = uio->uio_resid;
734 	if (buf_len != 0) {
735 		buf = malloc(buf_len, M_DEVBUF, M_WAITOK | M_ZERO);
736 		error = uiomove(buf, buf_len, uio);
737 		if (error)
738 			goto out_buf;
739 		dir = CAM_DIR_OUT;
740 	} else if (hdr->reply_len != 0) {
741 		buf = malloc(hdr->reply_len, M_DEVBUF, M_WAITOK | M_ZERO);
742 		buf_len = hdr->reply_len;
743 		dir = CAM_DIR_IN;
744 	} else {
745 		buf = NULL;
746 		buf_len = 0;
747 		dir = CAM_DIR_NONE;
748 	}
749 
750 	cam_periph_lock(periph);
751 	sc = periph->softc;
752 	xpt_setup_ccb(&ccb->ccb_h, periph->path, CAM_PRIORITY_NORMAL);
753 	cam_fill_csio(csio,
754 		      /*retries*/1,
755 		      sgdone,
756 		      dir|CAM_DEV_QFRZDIS,
757 		      MSG_SIMPLE_Q_TAG,
758 		      buf,
759 		      buf_len,
760 		      SG_MAX_SENSE,
761 		      cdb_len,
762 		      sc->sg_timeout);
763 
764 	/*
765 	 * Send off the command and hope that it works. This path does not
766 	 * go through sgstart because the I/O is supposed to be asynchronous.
767 	 */
768 	rdwr->buf = buf;
769 	rdwr->buf_len = buf_len;
770 	rdwr->tag = hdr->pack_id;
771 	rdwr->ccb = ccb;
772 	rdwr->state = SG_RDWR_INPROG;
773 	ccb->ccb_h.ccb_rdwr = rdwr;
774 	ccb->ccb_h.ccb_type = SG_CCB_RDWR_IO;
775 	TAILQ_INSERT_TAIL(&sc->rdwr_done, rdwr, rdwr_link);
776 	error = sgsendrdwr(periph, ccb);
777 	cam_periph_unlock(periph);
778 	return (error);
779 
780 out_buf:
781 	free(buf, M_DEVBUF);
782 out_ccb:
783 	xpt_free_ccb(ccb);
784 out_hdr:
785 	free(rdwr, M_DEVBUF);
786 	return (error);
787 }
788 
789 static int
790 sgread(struct cdev *dev, struct uio *uio, int ioflag)
791 {
792 	struct ccb_scsiio *csio;
793 	struct cam_periph *periph;
794 	struct sg_softc *sc;
795 	struct sg_header *hdr;
796 	struct sg_rdwr *rdwr;
797 	u_short hstat, dstat;
798 	int error, pack_len, reply_len, pack_id;
799 
800 	periph = dev->si_drv1;
801 
802 	/* XXX The pack len field needs to be updated and written out instead
803 	 * of discarded.  Not sure how to do that.
804 	 */
805 	uio->uio_rw = UIO_WRITE;
806 	if ((error = uiomove(&pack_len, 4, uio)) != 0)
807 		return (error);
808 	if ((error = uiomove(&reply_len, 4, uio)) != 0)
809 		return (error);
810 	if ((error = uiomove(&pack_id, 4, uio)) != 0)
811 		return (error);
812 	uio->uio_rw = UIO_READ;
813 
814 	cam_periph_lock(periph);
815 	sc = periph->softc;
816 search:
817 	TAILQ_FOREACH(rdwr, &sc->rdwr_done, rdwr_link) {
818 		if (rdwr->tag == pack_id)
819 			break;
820 	}
821 	if ((rdwr == NULL) || (rdwr->state != SG_RDWR_DONE)) {
822 		if (cam_periph_sleep(periph, rdwr, PCATCH, "sgread", 0) == ERESTART)
823 			return (EAGAIN);
824 		goto search;
825 	}
826 	TAILQ_REMOVE(&sc->rdwr_done, rdwr, rdwr_link);
827 	cam_periph_unlock(periph);
828 
829 	hdr = &rdwr->hdr.hdr;
830 	csio = &rdwr->ccb->csio;
831 	sg_scsiio_status(csio, &hstat, &dstat);
832 	hdr->host_status = hstat;
833 	hdr->driver_status = dstat;
834 	hdr->target_status = csio->scsi_status >> 1;
835 
836 	switch (hstat) {
837 	case DID_OK:
838 	case DID_PASSTHROUGH:
839 	case DID_SOFT_ERROR:
840 		hdr->result = 0;
841 		break;
842 	case DID_NO_CONNECT:
843 	case DID_BUS_BUSY:
844 	case DID_TIME_OUT:
845 		hdr->result = EBUSY;
846 		break;
847 	case DID_BAD_TARGET:
848 	case DID_ABORT:
849 	case DID_PARITY:
850 	case DID_RESET:
851 	case DID_BAD_INTR:
852 	case DID_ERROR:
853 	default:
854 		hdr->result = EIO;
855 		break;
856 	}
857 
858 	if (dstat == DRIVER_SENSE) {
859 		bcopy(&csio->sense_data, hdr->sense_buffer,
860 		      min(csio->sense_len, SG_MAX_SENSE));
861 #ifdef CAMDEBUG
862 		scsi_sense_print(csio);
863 #endif
864 	}
865 
866 	error = uiomove(&hdr->result, sizeof(*hdr) -
867 			offsetof(struct sg_header, result), uio);
868 	if ((error == 0) && (hdr->result == 0))
869 		error = uiomove(rdwr->buf, rdwr->buf_len, uio);
870 
871 	cam_periph_lock(periph);
872 	xpt_free_ccb(rdwr->ccb);
873 	cam_periph_unlock(periph);
874 	free(rdwr->buf, M_DEVBUF);
875 	free(rdwr, M_DEVBUF);
876 	return (error);
877 }
878 
879 static int
880 sgsendccb(struct cam_periph *periph, union ccb *ccb)
881 {
882 	struct sg_softc *softc;
883 	struct cam_periph_map_info mapinfo;
884 	int error;
885 
886 	softc = periph->softc;
887 	bzero(&mapinfo, sizeof(mapinfo));
888 
889 	/*
890 	 * cam_periph_mapmem calls into proc and vm functions that can
891 	 * sleep as well as trigger I/O, so we can't hold the lock.
892 	 * Dropping it here is reasonably safe.
893 	 * The only CCB opcode that is possible here is XPT_SCSI_IO, no
894 	 * need for additional checks.
895 	 */
896 	cam_periph_unlock(periph);
897 	error = cam_periph_mapmem(ccb, &mapinfo);
898 	cam_periph_lock(periph);
899 	if (error)
900 		return (error);
901 
902 	error = cam_periph_runccb(ccb,
903 				  sgerror,
904 				  CAM_RETRY_SELTO,
905 				  SF_RETRY_UA,
906 				  softc->device_stats);
907 
908 	cam_periph_unmapmem(ccb, &mapinfo);
909 
910 	return (error);
911 }
912 
913 static int
914 sgsendrdwr(struct cam_periph *periph, union ccb *ccb)
915 {
916 	struct sg_softc *softc;
917 
918 	softc = periph->softc;
919 	devstat_start_transaction(softc->device_stats, NULL);
920 	xpt_action(ccb);
921 	return (0);
922 }
923 
924 static int
925 sgerror(union ccb *ccb, uint32_t cam_flags, uint32_t sense_flags)
926 {
927 	struct cam_periph *periph;
928 	struct sg_softc *softc;
929 
930 	periph = xpt_path_periph(ccb->ccb_h.path);
931 	softc = (struct sg_softc *)periph->softc;
932 
933 	return (cam_periph_error(ccb, cam_flags, sense_flags,
934 				 &softc->saved_ccb));
935 }
936 
937 static void
938 sg_scsiio_status(struct ccb_scsiio *csio, u_short *hoststat, u_short *drvstat)
939 {
940 	int status;
941 
942 	status = csio->ccb_h.status;
943 
944 	switch (status & CAM_STATUS_MASK) {
945 	case CAM_REQ_CMP:
946 		*hoststat = DID_OK;
947 		*drvstat = 0;
948 		break;
949 	case CAM_REQ_CMP_ERR:
950 		*hoststat = DID_ERROR;
951 		*drvstat = 0;
952 		break;
953 	case CAM_REQ_ABORTED:
954 		*hoststat = DID_ABORT;
955 		*drvstat = 0;
956 		break;
957 	case CAM_REQ_INVALID:
958 		*hoststat = DID_ERROR;
959 		*drvstat = DRIVER_INVALID;
960 		break;
961 	case CAM_DEV_NOT_THERE:
962 		*hoststat = DID_BAD_TARGET;
963 		*drvstat = 0;
964 		break;
965 	case CAM_SEL_TIMEOUT:
966 		*hoststat = DID_NO_CONNECT;
967 		*drvstat = 0;
968 		break;
969 	case CAM_CMD_TIMEOUT:
970 		*hoststat = DID_TIME_OUT;
971 		*drvstat = 0;
972 		break;
973 	case CAM_SCSI_STATUS_ERROR:
974 		*hoststat = DID_ERROR;
975 		*drvstat = 0;
976 		break;
977 	case CAM_SCSI_BUS_RESET:
978 		*hoststat = DID_RESET;
979 		*drvstat = 0;
980 		break;
981 	case CAM_UNCOR_PARITY:
982 		*hoststat = DID_PARITY;
983 		*drvstat = 0;
984 		break;
985 	case CAM_SCSI_BUSY:
986 		*hoststat = DID_BUS_BUSY;
987 		*drvstat = 0;
988 		break;
989 	default:
990 		*hoststat = DID_ERROR;
991 		*drvstat = DRIVER_ERROR;
992 	}
993 
994 	if (status & CAM_AUTOSNS_VALID)
995 		*drvstat = DRIVER_SENSE;
996 }
997 
998 static int
999 scsi_group_len(u_char cmd)
1000 {
1001 	int len[] = {6, 10, 10, 12, 12, 12, 10, 10};
1002 	int group;
1003 
1004 	group = (cmd >> 5) & 0x7;
1005 	return (len[group]);
1006 }
1007 
1008