1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2007 Scott Long 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions, and the following disclaimer, 12 * without modification, immediately at the beginning of the file. 13 * 2. The name of the author may not be used to endorse or promote products 14 * derived from this software without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 20 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 /* 30 * scsi_sg peripheral driver. This driver is meant to implement the Linux 31 * SG passthrough interface for SCSI. 32 */ 33 34 #include <sys/cdefs.h> 35 __FBSDID("$FreeBSD$"); 36 37 #include <sys/param.h> 38 #include <sys/systm.h> 39 #include <sys/kernel.h> 40 #include <sys/types.h> 41 #include <sys/bio.h> 42 #include <sys/malloc.h> 43 #include <sys/fcntl.h> 44 #include <sys/ioccom.h> 45 #include <sys/conf.h> 46 #include <sys/errno.h> 47 #include <sys/devicestat.h> 48 #include <sys/proc.h> 49 #include <sys/uio.h> 50 51 #include <cam/cam.h> 52 #include <cam/cam_ccb.h> 53 #include <cam/cam_periph.h> 54 #include <cam/cam_queue.h> 55 #include <cam/cam_xpt_periph.h> 56 #include <cam/cam_debug.h> 57 #include <cam/cam_sim.h> 58 59 #include <cam/scsi/scsi_all.h> 60 #include <cam/scsi/scsi_message.h> 61 #include <cam/scsi/scsi_sg.h> 62 63 typedef enum { 64 SG_FLAG_LOCKED = 0x01, 65 SG_FLAG_INVALID = 0x02 66 } sg_flags; 67 68 typedef enum { 69 SG_STATE_NORMAL 70 } sg_state; 71 72 typedef enum { 73 SG_RDWR_FREE, 74 SG_RDWR_INPROG, 75 SG_RDWR_DONE 76 } sg_rdwr_state; 77 78 typedef enum { 79 SG_CCB_RDWR_IO 80 } sg_ccb_types; 81 82 #define ccb_type ppriv_field0 83 #define ccb_rdwr ppriv_ptr1 84 85 struct sg_rdwr { 86 TAILQ_ENTRY(sg_rdwr) rdwr_link; 87 int tag; 88 int state; 89 int buf_len; 90 char *buf; 91 union ccb *ccb; 92 union { 93 struct sg_header hdr; 94 struct sg_io_hdr io_hdr; 95 } hdr; 96 }; 97 98 struct sg_softc { 99 sg_state state; 100 sg_flags flags; 101 int open_count; 102 u_int maxio; 103 struct devstat *device_stats; 104 TAILQ_HEAD(, sg_rdwr) rdwr_done; 105 struct cdev *dev; 106 int sg_timeout; 107 int sg_user_timeout; 108 uint8_t pd_type; 109 }; 110 111 static d_open_t sgopen; 112 static d_close_t sgclose; 113 static d_ioctl_t sgioctl; 114 static d_write_t sgwrite; 115 static d_read_t sgread; 116 117 static periph_init_t sginit; 118 static periph_ctor_t sgregister; 119 static periph_oninv_t sgoninvalidate; 120 static periph_dtor_t sgcleanup; 121 static void sgasync(void *callback_arg, uint32_t code, 122 struct cam_path *path, void *arg); 123 static void sgdone(struct cam_periph *periph, union ccb *done_ccb); 124 static int sgsendccb(struct cam_periph *periph, union ccb *ccb); 125 static int sgsendrdwr(struct cam_periph *periph, union ccb *ccb); 126 static int sgerror(union ccb *ccb, uint32_t cam_flags, 127 uint32_t sense_flags); 128 static void sg_scsiio_status(struct ccb_scsiio *csio, 129 u_short *hoststat, u_short *drvstat); 130 131 static int scsi_group_len(u_char cmd); 132 133 static struct periph_driver sgdriver = 134 { 135 sginit, "sg", 136 TAILQ_HEAD_INITIALIZER(sgdriver.units), /* gen */ 0 137 }; 138 PERIPHDRIVER_DECLARE(sg, sgdriver); 139 140 static struct cdevsw sg_cdevsw = { 141 .d_version = D_VERSION, 142 .d_flags = D_TRACKCLOSE, 143 .d_open = sgopen, 144 .d_close = sgclose, 145 .d_ioctl = sgioctl, 146 .d_write = sgwrite, 147 .d_read = sgread, 148 .d_name = "sg", 149 }; 150 151 static int sg_version = 30125; 152 153 static void 154 sginit(void) 155 { 156 cam_status status; 157 158 /* 159 * Install a global async callback. This callback will receive aync 160 * callbacks like "new device found". 161 */ 162 status = xpt_register_async(AC_FOUND_DEVICE, sgasync, NULL, NULL); 163 164 if (status != CAM_REQ_CMP) { 165 printf("sg: Failed to attach master async callbac " 166 "due to status 0x%x!\n", status); 167 } 168 } 169 170 static void 171 sgdevgonecb(void *arg) 172 { 173 struct cam_periph *periph; 174 struct sg_softc *softc; 175 struct mtx *mtx; 176 int i; 177 178 periph = (struct cam_periph *)arg; 179 mtx = cam_periph_mtx(periph); 180 mtx_lock(mtx); 181 182 softc = (struct sg_softc *)periph->softc; 183 KASSERT(softc->open_count >= 0, ("Negative open count %d", 184 softc->open_count)); 185 186 /* 187 * When we get this callback, we will get no more close calls from 188 * devfs. So if we have any dangling opens, we need to release the 189 * reference held for that particular context. 190 */ 191 for (i = 0; i < softc->open_count; i++) 192 cam_periph_release_locked(periph); 193 194 softc->open_count = 0; 195 196 /* 197 * Release the reference held for the device node, it is gone now. 198 */ 199 cam_periph_release_locked(periph); 200 201 /* 202 * We reference the lock directly here, instead of using 203 * cam_periph_unlock(). The reason is that the final call to 204 * cam_periph_release_locked() above could result in the periph 205 * getting freed. If that is the case, dereferencing the periph 206 * with a cam_periph_unlock() call would cause a page fault. 207 */ 208 mtx_unlock(mtx); 209 } 210 211 static void 212 sgoninvalidate(struct cam_periph *periph) 213 { 214 struct sg_softc *softc; 215 216 softc = (struct sg_softc *)periph->softc; 217 218 /* 219 * Deregister any async callbacks. 220 */ 221 xpt_register_async(0, sgasync, periph, periph->path); 222 223 softc->flags |= SG_FLAG_INVALID; 224 225 /* 226 * Tell devfs this device has gone away, and ask for a callback 227 * when it has cleaned up its state. 228 */ 229 destroy_dev_sched_cb(softc->dev, sgdevgonecb, periph); 230 231 /* 232 * XXX Return all queued I/O with ENXIO. 233 * XXX Handle any transactions queued to the card 234 * with XPT_ABORT_CCB. 235 */ 236 237 } 238 239 static void 240 sgcleanup(struct cam_periph *periph) 241 { 242 struct sg_softc *softc; 243 244 softc = (struct sg_softc *)periph->softc; 245 246 devstat_remove_entry(softc->device_stats); 247 248 free(softc, M_DEVBUF); 249 } 250 251 static void 252 sgasync(void *callback_arg, uint32_t code, struct cam_path *path, void *arg) 253 { 254 struct cam_periph *periph; 255 256 periph = (struct cam_periph *)callback_arg; 257 258 switch (code) { 259 case AC_FOUND_DEVICE: 260 { 261 struct ccb_getdev *cgd; 262 cam_status status; 263 264 cgd = (struct ccb_getdev *)arg; 265 if (cgd == NULL) 266 break; 267 268 if (cgd->protocol != PROTO_SCSI) 269 break; 270 271 /* 272 * Allocate a peripheral instance for this device and 273 * start the probe process. 274 */ 275 status = cam_periph_alloc(sgregister, sgoninvalidate, 276 sgcleanup, NULL, "sg", 277 CAM_PERIPH_BIO, path, 278 sgasync, AC_FOUND_DEVICE, cgd); 279 if ((status != CAM_REQ_CMP) && (status != CAM_REQ_INPROG)) { 280 const struct cam_status_entry *entry; 281 282 entry = cam_fetch_status_entry(status); 283 printf("sgasync: Unable to attach new device " 284 "due to status %#x: %s\n", status, entry ? 285 entry->status_text : "Unknown"); 286 } 287 break; 288 } 289 default: 290 cam_periph_async(periph, code, path, arg); 291 break; 292 } 293 } 294 295 static cam_status 296 sgregister(struct cam_periph *periph, void *arg) 297 { 298 struct sg_softc *softc; 299 struct ccb_getdev *cgd; 300 struct ccb_pathinq cpi; 301 struct make_dev_args args; 302 int no_tags, error; 303 304 cgd = (struct ccb_getdev *)arg; 305 if (cgd == NULL) { 306 printf("sgregister: no getdev CCB, can't register device\n"); 307 return (CAM_REQ_CMP_ERR); 308 } 309 310 softc = malloc(sizeof(*softc), M_DEVBUF, M_ZERO | M_NOWAIT); 311 if (softc == NULL) { 312 printf("sgregister: Unable to allocate softc\n"); 313 return (CAM_REQ_CMP_ERR); 314 } 315 316 softc->state = SG_STATE_NORMAL; 317 softc->pd_type = SID_TYPE(&cgd->inq_data); 318 softc->sg_timeout = SG_DEFAULT_TIMEOUT / SG_DEFAULT_HZ * hz; 319 softc->sg_user_timeout = SG_DEFAULT_TIMEOUT; 320 TAILQ_INIT(&softc->rdwr_done); 321 periph->softc = softc; 322 323 xpt_path_inq(&cpi, periph->path); 324 325 if (cpi.maxio == 0) 326 softc->maxio = DFLTPHYS; /* traditional default */ 327 else if (cpi.maxio > maxphys) 328 softc->maxio = maxphys; /* for safety */ 329 else 330 softc->maxio = cpi.maxio; /* real value */ 331 332 /* 333 * We pass in 0 for all blocksize, since we don't know what the 334 * blocksize of the device is, if it even has a blocksize. 335 */ 336 cam_periph_unlock(periph); 337 no_tags = (cgd->inq_data.flags & SID_CmdQue) == 0; 338 softc->device_stats = devstat_new_entry("sg", 339 periph->unit_number, 0, 340 DEVSTAT_NO_BLOCKSIZE 341 | (no_tags ? DEVSTAT_NO_ORDERED_TAGS : 0), 342 softc->pd_type | 343 XPORT_DEVSTAT_TYPE(cpi.transport) | 344 DEVSTAT_TYPE_PASS, 345 DEVSTAT_PRIORITY_PASS); 346 347 /* 348 * Acquire a reference to the periph before we create the devfs 349 * instance for it. We'll release this reference once the devfs 350 * instance has been freed. 351 */ 352 if (cam_periph_acquire(periph) != 0) { 353 xpt_print(periph->path, "%s: lost periph during " 354 "registration!\n", __func__); 355 cam_periph_lock(periph); 356 return (CAM_REQ_CMP_ERR); 357 } 358 359 /* Register the device */ 360 make_dev_args_init(&args); 361 args.mda_devsw = &sg_cdevsw; 362 args.mda_unit = periph->unit_number; 363 args.mda_uid = UID_ROOT; 364 args.mda_gid = GID_OPERATOR; 365 args.mda_mode = 0600; 366 args.mda_si_drv1 = periph; 367 error = make_dev_s(&args, &softc->dev, "%s%d", 368 periph->periph_name, periph->unit_number); 369 if (error != 0) { 370 cam_periph_lock(periph); 371 cam_periph_release_locked(periph); 372 return (CAM_REQ_CMP_ERR); 373 } 374 if (periph->unit_number < 26) { 375 (void)make_dev_alias(softc->dev, "sg%c", 376 periph->unit_number + 'a'); 377 } else { 378 (void)make_dev_alias(softc->dev, "sg%c%c", 379 ((periph->unit_number / 26) - 1) + 'a', 380 (periph->unit_number % 26) + 'a'); 381 } 382 cam_periph_lock(periph); 383 384 /* 385 * Add as async callback so that we get 386 * notified if this device goes away. 387 */ 388 xpt_register_async(AC_LOST_DEVICE, sgasync, periph, periph->path); 389 390 if (bootverbose) 391 xpt_announce_periph(periph, NULL); 392 393 return (CAM_REQ_CMP); 394 } 395 396 static void 397 sgdone(struct cam_periph *periph, union ccb *done_ccb) 398 { 399 struct sg_softc *softc; 400 struct ccb_scsiio *csio; 401 402 softc = (struct sg_softc *)periph->softc; 403 csio = &done_ccb->csio; 404 switch (csio->ccb_h.ccb_type) { 405 case SG_CCB_RDWR_IO: 406 { 407 struct sg_rdwr *rdwr; 408 409 devstat_end_transaction(softc->device_stats, 410 csio->dxfer_len, 411 csio->tag_action & 0xf, 412 ((csio->ccb_h.flags & CAM_DIR_MASK) == 413 CAM_DIR_NONE) ? DEVSTAT_NO_DATA : 414 (csio->ccb_h.flags & CAM_DIR_OUT) ? 415 DEVSTAT_WRITE : DEVSTAT_READ, 416 NULL, NULL); 417 418 rdwr = done_ccb->ccb_h.ccb_rdwr; 419 rdwr->state = SG_RDWR_DONE; 420 wakeup(rdwr); 421 break; 422 } 423 default: 424 panic("unknown sg CCB type"); 425 } 426 } 427 428 static int 429 sgopen(struct cdev *dev, int flags, int fmt, struct thread *td) 430 { 431 struct cam_periph *periph; 432 struct sg_softc *softc; 433 int error = 0; 434 435 periph = (struct cam_periph *)dev->si_drv1; 436 if (cam_periph_acquire(periph) != 0) 437 return (ENXIO); 438 439 /* 440 * Don't allow access when we're running at a high securelevel. 441 */ 442 error = securelevel_gt(td->td_ucred, 1); 443 if (error) { 444 cam_periph_release(periph); 445 return (error); 446 } 447 448 cam_periph_lock(periph); 449 450 softc = (struct sg_softc *)periph->softc; 451 if (softc->flags & SG_FLAG_INVALID) { 452 cam_periph_release_locked(periph); 453 cam_periph_unlock(periph); 454 return (ENXIO); 455 } 456 457 softc->open_count++; 458 459 cam_periph_unlock(periph); 460 461 return (error); 462 } 463 464 static int 465 sgclose(struct cdev *dev, int flag, int fmt, struct thread *td) 466 { 467 struct cam_periph *periph; 468 struct sg_softc *softc; 469 struct mtx *mtx; 470 471 periph = (struct cam_periph *)dev->si_drv1; 472 mtx = cam_periph_mtx(periph); 473 mtx_lock(mtx); 474 475 softc = periph->softc; 476 softc->open_count--; 477 478 cam_periph_release_locked(periph); 479 480 /* 481 * We reference the lock directly here, instead of using 482 * cam_periph_unlock(). The reason is that the call to 483 * cam_periph_release_locked() above could result in the periph 484 * getting freed. If that is the case, dereferencing the periph 485 * with a cam_periph_unlock() call would cause a page fault. 486 * 487 * cam_periph_release() avoids this problem using the same method, 488 * but we're manually acquiring and dropping the lock here to 489 * protect the open count and avoid another lock acquisition and 490 * release. 491 */ 492 mtx_unlock(mtx); 493 494 return (0); 495 } 496 497 static int 498 sgioctl(struct cdev *dev, u_long cmd, caddr_t arg, int flag, struct thread *td) 499 { 500 union ccb *ccb; 501 struct ccb_scsiio *csio; 502 struct cam_periph *periph; 503 struct sg_softc *softc; 504 struct sg_io_hdr *req; 505 int dir, error; 506 507 periph = (struct cam_periph *)dev->si_drv1; 508 cam_periph_lock(periph); 509 510 softc = (struct sg_softc *)periph->softc; 511 error = 0; 512 513 switch (cmd) { 514 case SG_GET_VERSION_NUM: 515 { 516 int *version = (int *)arg; 517 518 *version = sg_version; 519 break; 520 } 521 case SG_SET_TIMEOUT: 522 { 523 u_int user_timeout = *(u_int *)arg; 524 525 softc->sg_user_timeout = user_timeout; 526 softc->sg_timeout = user_timeout / SG_DEFAULT_HZ * hz; 527 break; 528 } 529 case SG_GET_TIMEOUT: 530 /* 531 * The value is returned directly to the syscall. 532 */ 533 td->td_retval[0] = softc->sg_user_timeout; 534 error = 0; 535 break; 536 case SG_IO: 537 req = (struct sg_io_hdr *)arg; 538 539 if (req->cmd_len > IOCDBLEN) { 540 error = EINVAL; 541 break; 542 } 543 544 if (req->iovec_count != 0) { 545 error = EOPNOTSUPP; 546 break; 547 } 548 549 ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL); 550 csio = &ccb->csio; 551 552 error = copyin(req->cmdp, &csio->cdb_io.cdb_bytes, 553 req->cmd_len); 554 if (error) { 555 xpt_release_ccb(ccb); 556 break; 557 } 558 559 switch(req->dxfer_direction) { 560 case SG_DXFER_TO_DEV: 561 dir = CAM_DIR_OUT; 562 break; 563 case SG_DXFER_FROM_DEV: 564 dir = CAM_DIR_IN; 565 break; 566 case SG_DXFER_TO_FROM_DEV: 567 dir = CAM_DIR_BOTH; 568 break; 569 case SG_DXFER_NONE: 570 default: 571 dir = CAM_DIR_NONE; 572 break; 573 } 574 575 cam_fill_csio(csio, 576 /*retries*/1, 577 /*cbfcnp*/NULL, 578 dir|CAM_DEV_QFRZDIS, 579 MSG_SIMPLE_Q_TAG, 580 req->dxferp, 581 req->dxfer_len, 582 req->mx_sb_len, 583 req->cmd_len, 584 req->timeout); 585 586 error = sgsendccb(periph, ccb); 587 if (error) { 588 req->host_status = DID_ERROR; 589 req->driver_status = DRIVER_INVALID; 590 xpt_release_ccb(ccb); 591 break; 592 } 593 594 req->status = csio->scsi_status; 595 req->masked_status = (csio->scsi_status >> 1) & 0x7f; 596 sg_scsiio_status(csio, &req->host_status, &req->driver_status); 597 req->resid = csio->resid; 598 req->duration = csio->ccb_h.timeout; 599 req->info = 0; 600 601 if ((csio->ccb_h.status & CAM_AUTOSNS_VALID) 602 && (req->sbp != NULL)) { 603 req->sb_len_wr = req->mx_sb_len - csio->sense_resid; 604 error = copyout(&csio->sense_data, req->sbp, 605 req->sb_len_wr); 606 } 607 608 xpt_release_ccb(ccb); 609 break; 610 611 case SG_GET_RESERVED_SIZE: 612 { 613 int *size = (int *)arg; 614 *size = DFLTPHYS; 615 break; 616 } 617 618 case SG_GET_SCSI_ID: 619 { 620 struct sg_scsi_id *id = (struct sg_scsi_id *)arg; 621 622 id->host_no = cam_sim_path(xpt_path_sim(periph->path)); 623 id->channel = xpt_path_path_id(periph->path); 624 id->scsi_id = xpt_path_target_id(periph->path); 625 id->lun = xpt_path_lun_id(periph->path); 626 id->scsi_type = softc->pd_type; 627 id->h_cmd_per_lun = 1; 628 id->d_queue_depth = 1; 629 id->unused[0] = 0; 630 id->unused[1] = 0; 631 break; 632 } 633 634 case SG_GET_SG_TABLESIZE: 635 { 636 int *size = (int *)arg; 637 *size = 0; 638 break; 639 } 640 641 case SG_EMULATED_HOST: 642 case SG_SET_TRANSFORM: 643 case SG_GET_TRANSFORM: 644 case SG_GET_NUM_WAITING: 645 case SG_SCSI_RESET: 646 case SG_GET_REQUEST_TABLE: 647 case SG_SET_KEEP_ORPHAN: 648 case SG_GET_KEEP_ORPHAN: 649 case SG_GET_ACCESS_COUNT: 650 case SG_SET_FORCE_LOW_DMA: 651 case SG_GET_LOW_DMA: 652 case SG_SET_FORCE_PACK_ID: 653 case SG_GET_PACK_ID: 654 case SG_SET_RESERVED_SIZE: 655 case SG_GET_COMMAND_Q: 656 case SG_SET_COMMAND_Q: 657 case SG_SET_DEBUG: 658 case SG_NEXT_CMD_LEN: 659 default: 660 #ifdef CAMDEBUG 661 printf("sgioctl: rejecting cmd 0x%lx\n", cmd); 662 #endif 663 error = ENODEV; 664 break; 665 } 666 667 cam_periph_unlock(periph); 668 return (error); 669 } 670 671 static int 672 sgwrite(struct cdev *dev, struct uio *uio, int ioflag) 673 { 674 union ccb *ccb; 675 struct cam_periph *periph; 676 struct ccb_scsiio *csio; 677 struct sg_softc *sc; 678 struct sg_header *hdr; 679 struct sg_rdwr *rdwr; 680 u_char cdb_cmd; 681 char *buf; 682 int error = 0, cdb_len, buf_len, dir; 683 684 periph = dev->si_drv1; 685 rdwr = malloc(sizeof(*rdwr), M_DEVBUF, M_WAITOK | M_ZERO); 686 hdr = &rdwr->hdr.hdr; 687 688 /* Copy in the header block and sanity check it */ 689 if (uio->uio_resid < sizeof(*hdr)) { 690 error = EINVAL; 691 goto out_hdr; 692 } 693 error = uiomove(hdr, sizeof(*hdr), uio); 694 if (error) 695 goto out_hdr; 696 697 /* XXX: We don't support SG 3.x read/write API. */ 698 if (hdr->reply_len < 0) { 699 error = ENODEV; 700 goto out_hdr; 701 } 702 703 ccb = xpt_alloc_ccb(); 704 if (ccb == NULL) { 705 error = ENOMEM; 706 goto out_hdr; 707 } 708 csio = &ccb->csio; 709 710 /* 711 * Copy in the CDB block. The designers of the interface didn't 712 * bother to provide a size for this in the header, so we have to 713 * figure it out ourselves. 714 */ 715 if (uio->uio_resid < 1) 716 goto out_ccb; 717 error = uiomove(&cdb_cmd, 1, uio); 718 if (error) 719 goto out_ccb; 720 if (hdr->twelve_byte) 721 cdb_len = 12; 722 else 723 cdb_len = scsi_group_len(cdb_cmd); 724 /* 725 * We've already read the first byte of the CDB and advanced the uio 726 * pointer. Just read the rest. 727 */ 728 csio->cdb_io.cdb_bytes[0] = cdb_cmd; 729 error = uiomove(&csio->cdb_io.cdb_bytes[1], cdb_len - 1, uio); 730 if (error) 731 goto out_ccb; 732 733 /* 734 * Now set up the data block. Again, the designers didn't bother 735 * to make this reliable. 736 */ 737 buf_len = uio->uio_resid; 738 if (buf_len != 0) { 739 buf = malloc(buf_len, M_DEVBUF, M_WAITOK | M_ZERO); 740 error = uiomove(buf, buf_len, uio); 741 if (error) 742 goto out_buf; 743 dir = CAM_DIR_OUT; 744 } else if (hdr->reply_len != 0) { 745 buf = malloc(hdr->reply_len, M_DEVBUF, M_WAITOK | M_ZERO); 746 buf_len = hdr->reply_len; 747 dir = CAM_DIR_IN; 748 } else { 749 buf = NULL; 750 buf_len = 0; 751 dir = CAM_DIR_NONE; 752 } 753 754 cam_periph_lock(periph); 755 sc = periph->softc; 756 xpt_setup_ccb(&ccb->ccb_h, periph->path, CAM_PRIORITY_NORMAL); 757 cam_fill_csio(csio, 758 /*retries*/1, 759 sgdone, 760 dir|CAM_DEV_QFRZDIS, 761 MSG_SIMPLE_Q_TAG, 762 buf, 763 buf_len, 764 SG_MAX_SENSE, 765 cdb_len, 766 sc->sg_timeout); 767 768 /* 769 * Send off the command and hope that it works. This path does not 770 * go through sgstart because the I/O is supposed to be asynchronous. 771 */ 772 rdwr->buf = buf; 773 rdwr->buf_len = buf_len; 774 rdwr->tag = hdr->pack_id; 775 rdwr->ccb = ccb; 776 rdwr->state = SG_RDWR_INPROG; 777 ccb->ccb_h.ccb_rdwr = rdwr; 778 ccb->ccb_h.ccb_type = SG_CCB_RDWR_IO; 779 TAILQ_INSERT_TAIL(&sc->rdwr_done, rdwr, rdwr_link); 780 error = sgsendrdwr(periph, ccb); 781 cam_periph_unlock(periph); 782 return (error); 783 784 out_buf: 785 free(buf, M_DEVBUF); 786 out_ccb: 787 xpt_free_ccb(ccb); 788 out_hdr: 789 free(rdwr, M_DEVBUF); 790 return (error); 791 } 792 793 static int 794 sgread(struct cdev *dev, struct uio *uio, int ioflag) 795 { 796 struct ccb_scsiio *csio; 797 struct cam_periph *periph; 798 struct sg_softc *sc; 799 struct sg_header *hdr; 800 struct sg_rdwr *rdwr; 801 u_short hstat, dstat; 802 int error, pack_len, reply_len, pack_id; 803 804 periph = dev->si_drv1; 805 806 /* XXX The pack len field needs to be updated and written out instead 807 * of discarded. Not sure how to do that. 808 */ 809 uio->uio_rw = UIO_WRITE; 810 if ((error = uiomove(&pack_len, 4, uio)) != 0) 811 return (error); 812 if ((error = uiomove(&reply_len, 4, uio)) != 0) 813 return (error); 814 if ((error = uiomove(&pack_id, 4, uio)) != 0) 815 return (error); 816 uio->uio_rw = UIO_READ; 817 818 cam_periph_lock(periph); 819 sc = periph->softc; 820 search: 821 TAILQ_FOREACH(rdwr, &sc->rdwr_done, rdwr_link) { 822 if (rdwr->tag == pack_id) 823 break; 824 } 825 if ((rdwr == NULL) || (rdwr->state != SG_RDWR_DONE)) { 826 if (cam_periph_sleep(periph, rdwr, PCATCH, "sgread", 0) == ERESTART) 827 return (EAGAIN); 828 goto search; 829 } 830 TAILQ_REMOVE(&sc->rdwr_done, rdwr, rdwr_link); 831 cam_periph_unlock(periph); 832 833 hdr = &rdwr->hdr.hdr; 834 csio = &rdwr->ccb->csio; 835 sg_scsiio_status(csio, &hstat, &dstat); 836 hdr->host_status = hstat; 837 hdr->driver_status = dstat; 838 hdr->target_status = csio->scsi_status >> 1; 839 840 switch (hstat) { 841 case DID_OK: 842 case DID_PASSTHROUGH: 843 case DID_SOFT_ERROR: 844 hdr->result = 0; 845 break; 846 case DID_NO_CONNECT: 847 case DID_BUS_BUSY: 848 case DID_TIME_OUT: 849 hdr->result = EBUSY; 850 break; 851 case DID_BAD_TARGET: 852 case DID_ABORT: 853 case DID_PARITY: 854 case DID_RESET: 855 case DID_BAD_INTR: 856 case DID_ERROR: 857 default: 858 hdr->result = EIO; 859 break; 860 } 861 862 if (dstat == DRIVER_SENSE) { 863 bcopy(&csio->sense_data, hdr->sense_buffer, 864 min(csio->sense_len, SG_MAX_SENSE)); 865 #ifdef CAMDEBUG 866 scsi_sense_print(csio); 867 #endif 868 } 869 870 error = uiomove(&hdr->result, sizeof(*hdr) - 871 offsetof(struct sg_header, result), uio); 872 if ((error == 0) && (hdr->result == 0)) 873 error = uiomove(rdwr->buf, rdwr->buf_len, uio); 874 875 cam_periph_lock(periph); 876 xpt_free_ccb(rdwr->ccb); 877 cam_periph_unlock(periph); 878 free(rdwr->buf, M_DEVBUF); 879 free(rdwr, M_DEVBUF); 880 return (error); 881 } 882 883 static int 884 sgsendccb(struct cam_periph *periph, union ccb *ccb) 885 { 886 struct sg_softc *softc; 887 struct cam_periph_map_info mapinfo; 888 int error; 889 890 softc = periph->softc; 891 bzero(&mapinfo, sizeof(mapinfo)); 892 893 /* 894 * cam_periph_mapmem calls into proc and vm functions that can 895 * sleep as well as trigger I/O, so we can't hold the lock. 896 * Dropping it here is reasonably safe. 897 * The only CCB opcode that is possible here is XPT_SCSI_IO, no 898 * need for additional checks. 899 */ 900 cam_periph_unlock(periph); 901 error = cam_periph_mapmem(ccb, &mapinfo, softc->maxio); 902 cam_periph_lock(periph); 903 if (error) 904 return (error); 905 906 error = cam_periph_runccb(ccb, 907 sgerror, 908 CAM_RETRY_SELTO, 909 SF_RETRY_UA, 910 softc->device_stats); 911 912 cam_periph_unlock(periph); 913 cam_periph_unmapmem(ccb, &mapinfo); 914 cam_periph_lock(periph); 915 916 return (error); 917 } 918 919 static int 920 sgsendrdwr(struct cam_periph *periph, union ccb *ccb) 921 { 922 struct sg_softc *softc; 923 924 softc = periph->softc; 925 devstat_start_transaction(softc->device_stats, NULL); 926 xpt_action(ccb); 927 return (0); 928 } 929 930 static int 931 sgerror(union ccb *ccb, uint32_t cam_flags, uint32_t sense_flags) 932 { 933 934 return (cam_periph_error(ccb, cam_flags, sense_flags)); 935 } 936 937 static void 938 sg_scsiio_status(struct ccb_scsiio *csio, u_short *hoststat, u_short *drvstat) 939 { 940 int status; 941 942 status = csio->ccb_h.status; 943 944 switch (status & CAM_STATUS_MASK) { 945 case CAM_REQ_CMP: 946 *hoststat = DID_OK; 947 *drvstat = 0; 948 break; 949 case CAM_REQ_CMP_ERR: 950 *hoststat = DID_ERROR; 951 *drvstat = 0; 952 break; 953 case CAM_REQ_ABORTED: 954 *hoststat = DID_ABORT; 955 *drvstat = 0; 956 break; 957 case CAM_REQ_INVALID: 958 *hoststat = DID_ERROR; 959 *drvstat = DRIVER_INVALID; 960 break; 961 case CAM_DEV_NOT_THERE: 962 *hoststat = DID_BAD_TARGET; 963 *drvstat = 0; 964 break; 965 case CAM_SEL_TIMEOUT: 966 *hoststat = DID_NO_CONNECT; 967 *drvstat = 0; 968 break; 969 case CAM_CMD_TIMEOUT: 970 *hoststat = DID_TIME_OUT; 971 *drvstat = 0; 972 break; 973 case CAM_SCSI_STATUS_ERROR: 974 *hoststat = DID_ERROR; 975 *drvstat = 0; 976 break; 977 case CAM_SCSI_BUS_RESET: 978 *hoststat = DID_RESET; 979 *drvstat = 0; 980 break; 981 case CAM_UNCOR_PARITY: 982 *hoststat = DID_PARITY; 983 *drvstat = 0; 984 break; 985 case CAM_SCSI_BUSY: 986 *hoststat = DID_BUS_BUSY; 987 *drvstat = 0; 988 break; 989 default: 990 *hoststat = DID_ERROR; 991 *drvstat = DRIVER_ERROR; 992 } 993 994 if (status & CAM_AUTOSNS_VALID) 995 *drvstat = DRIVER_SENSE; 996 } 997 998 static int 999 scsi_group_len(u_char cmd) 1000 { 1001 int len[] = {6, 10, 10, 12, 12, 12, 10, 10}; 1002 int group; 1003 1004 group = (cmd >> 5) & 0x7; 1005 return (len[group]); 1006 } 1007