xref: /freebsd/sys/cam/scsi/scsi_pt.c (revision ee24d3b8401985c99a4a1755765fe9332daee568)
1 /*-
2  * Implementation of SCSI Processor Target Peripheral driver for CAM.
3  *
4  * Copyright (c) 1998 Justin T. Gibbs.
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions, and the following disclaimer,
12  *    without modification, immediately at the beginning of the file.
13  * 2. The name of the author may not be used to endorse or promote products
14  *    derived from this software without specific prior written permission.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
20  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26  * SUCH DAMAGE.
27  */
28 
29 #include <sys/cdefs.h>
30 __FBSDID("$FreeBSD$");
31 
32 #include <sys/param.h>
33 #include <sys/queue.h>
34 #include <sys/systm.h>
35 #include <sys/kernel.h>
36 #include <sys/types.h>
37 #include <sys/bio.h>
38 #include <sys/devicestat.h>
39 #include <sys/malloc.h>
40 #include <sys/conf.h>
41 #include <sys/ptio.h>
42 
43 #include <cam/cam.h>
44 #include <cam/cam_ccb.h>
45 #include <cam/cam_periph.h>
46 #include <cam/cam_xpt_periph.h>
47 #include <cam/cam_debug.h>
48 
49 #include <cam/scsi/scsi_all.h>
50 #include <cam/scsi/scsi_message.h>
51 #include <cam/scsi/scsi_pt.h>
52 
53 #include "opt_pt.h"
54 
55 typedef enum {
56 	PT_STATE_PROBE,
57 	PT_STATE_NORMAL
58 } pt_state;
59 
60 typedef enum {
61 	PT_FLAG_NONE		= 0x00,
62 	PT_FLAG_OPEN		= 0x01,
63 	PT_FLAG_DEVICE_INVALID	= 0x02,
64 	PT_FLAG_RETRY_UA	= 0x04
65 } pt_flags;
66 
67 typedef enum {
68 	PT_CCB_BUFFER_IO	= 0x01,
69 	PT_CCB_WAITING		= 0x02,
70 	PT_CCB_RETRY_UA		= 0x04,
71 	PT_CCB_BUFFER_IO_UA	= PT_CCB_BUFFER_IO|PT_CCB_RETRY_UA
72 } pt_ccb_state;
73 
74 /* Offsets into our private area for storing information */
75 #define ccb_state	ppriv_field0
76 #define ccb_bp		ppriv_ptr1
77 
78 struct pt_softc {
79 	struct	 bio_queue_head bio_queue;
80 	struct	 devstat *device_stats;
81 	LIST_HEAD(, ccb_hdr) pending_ccbs;
82 	pt_state state;
83 	pt_flags flags;
84 	union	 ccb saved_ccb;
85 	int	 io_timeout;
86 	struct cdev *dev;
87 };
88 
89 static	d_open_t	ptopen;
90 static	d_close_t	ptclose;
91 static	d_strategy_t	ptstrategy;
92 static	periph_init_t	ptinit;
93 static	void		ptasync(void *callback_arg, u_int32_t code,
94 				struct cam_path *path, void *arg);
95 static	periph_ctor_t	ptctor;
96 static	periph_oninv_t	ptoninvalidate;
97 static	periph_dtor_t	ptdtor;
98 static	periph_start_t	ptstart;
99 static	void		ptdone(struct cam_periph *periph,
100 			       union ccb *done_ccb);
101 static	d_ioctl_t	ptioctl;
102 static  int		pterror(union ccb *ccb, u_int32_t cam_flags,
103 				u_int32_t sense_flags);
104 
105 void	scsi_send_receive(struct ccb_scsiio *csio, u_int32_t retries,
106 			  void (*cbfcnp)(struct cam_periph *, union ccb *),
107 			  u_int tag_action, int readop, u_int byte2,
108 			  u_int32_t xfer_len, u_int8_t *data_ptr,
109 			  u_int8_t sense_len, u_int32_t timeout);
110 
111 static struct periph_driver ptdriver =
112 {
113 	ptinit, "pt",
114 	TAILQ_HEAD_INITIALIZER(ptdriver.units), /* generation */ 0
115 };
116 
117 PERIPHDRIVER_DECLARE(pt, ptdriver);
118 
119 
120 static struct cdevsw pt_cdevsw = {
121 	.d_version =	D_VERSION,
122 	.d_flags =	0,
123 	.d_open =	ptopen,
124 	.d_close =	ptclose,
125 	.d_read =	physread,
126 	.d_write =	physwrite,
127 	.d_ioctl =	ptioctl,
128 	.d_strategy =	ptstrategy,
129 	.d_name =	"pt",
130 };
131 
132 #ifndef SCSI_PT_DEFAULT_TIMEOUT
133 #define SCSI_PT_DEFAULT_TIMEOUT		60
134 #endif
135 
136 static int
137 ptopen(struct cdev *dev, int flags, int fmt, struct thread *td)
138 {
139 	struct cam_periph *periph;
140 	struct pt_softc *softc;
141 	int error = 0;
142 
143 	periph = (struct cam_periph *)dev->si_drv1;
144 	if (cam_periph_acquire(periph) != CAM_REQ_CMP)
145 		return (ENXIO);
146 
147 	softc = (struct pt_softc *)periph->softc;
148 
149 	cam_periph_lock(periph);
150 	if (softc->flags & PT_FLAG_DEVICE_INVALID) {
151 		cam_periph_release_locked(periph);
152 		cam_periph_unlock(periph);
153 		return(ENXIO);
154 	}
155 
156 	if ((softc->flags & PT_FLAG_OPEN) == 0)
157 		softc->flags |= PT_FLAG_OPEN;
158 	else {
159 		error = EBUSY;
160 		cam_periph_release(periph);
161 	}
162 
163 	CAM_DEBUG(periph->path, CAM_DEBUG_TRACE,
164 	    ("ptopen: dev=%s\n", devtoname(dev)));
165 
166 	cam_periph_unlock(periph);
167 	return (error);
168 }
169 
170 static int
171 ptclose(struct cdev *dev, int flag, int fmt, struct thread *td)
172 {
173 	struct	cam_periph *periph;
174 	struct	pt_softc *softc;
175 
176 	periph = (struct cam_periph *)dev->si_drv1;
177 	if (periph == NULL)
178 		return (ENXIO);
179 
180 	softc = (struct pt_softc *)periph->softc;
181 
182 	cam_periph_lock(periph);
183 
184 	softc->flags &= ~PT_FLAG_OPEN;
185 	cam_periph_release_locked(periph);
186 	cam_periph_unlock(periph);
187 	return (0);
188 }
189 
190 /*
191  * Actually translate the requested transfer into one the physical driver
192  * can understand.  The transfer is described by a buf and will include
193  * only one physical transfer.
194  */
195 static void
196 ptstrategy(struct bio *bp)
197 {
198 	struct cam_periph *periph;
199 	struct pt_softc *softc;
200 
201 	periph = (struct cam_periph *)bp->bio_dev->si_drv1;
202 	bp->bio_resid = bp->bio_bcount;
203 	if (periph == NULL) {
204 		biofinish(bp, NULL, ENXIO);
205 		return;
206 	}
207 	cam_periph_lock(periph);
208 	softc = (struct pt_softc *)periph->softc;
209 
210 	/*
211 	 * If the device has been made invalid, error out
212 	 */
213 	if ((softc->flags & PT_FLAG_DEVICE_INVALID)) {
214 		cam_periph_unlock(periph);
215 		biofinish(bp, NULL, ENXIO);
216 		return;
217 	}
218 
219 	/*
220 	 * Place it in the queue of disk activities for this disk
221 	 */
222 	bioq_insert_tail(&softc->bio_queue, bp);
223 
224 	/*
225 	 * Schedule ourselves for performing the work.
226 	 */
227 	xpt_schedule(periph, CAM_PRIORITY_NORMAL);
228 	cam_periph_unlock(periph);
229 
230 	return;
231 }
232 
233 static void
234 ptinit(void)
235 {
236 	cam_status status;
237 
238 	/*
239 	 * Install a global async callback.  This callback will
240 	 * receive async callbacks like "new device found".
241 	 */
242 	status = xpt_register_async(AC_FOUND_DEVICE, ptasync, NULL, NULL);
243 
244 	if (status != CAM_REQ_CMP) {
245 		printf("pt: Failed to attach master async callback "
246 		       "due to status 0x%x!\n", status);
247 	}
248 }
249 
250 static cam_status
251 ptctor(struct cam_periph *periph, void *arg)
252 {
253 	struct pt_softc *softc;
254 	struct ccb_getdev *cgd;
255 	struct ccb_pathinq cpi;
256 
257 	cgd = (struct ccb_getdev *)arg;
258 	if (periph == NULL) {
259 		printf("ptregister: periph was NULL!!\n");
260 		return(CAM_REQ_CMP_ERR);
261 	}
262 
263 	if (cgd == NULL) {
264 		printf("ptregister: no getdev CCB, can't register device\n");
265 		return(CAM_REQ_CMP_ERR);
266 	}
267 
268 	softc = (struct pt_softc *)malloc(sizeof(*softc),M_DEVBUF,M_NOWAIT);
269 
270 	if (softc == NULL) {
271 		printf("daregister: Unable to probe new device. "
272 		       "Unable to allocate softc\n");
273 		return(CAM_REQ_CMP_ERR);
274 	}
275 
276 	bzero(softc, sizeof(*softc));
277 	LIST_INIT(&softc->pending_ccbs);
278 	softc->state = PT_STATE_NORMAL;
279 	bioq_init(&softc->bio_queue);
280 
281 	softc->io_timeout = SCSI_PT_DEFAULT_TIMEOUT * 1000;
282 
283 	periph->softc = softc;
284 
285 	bzero(&cpi, sizeof(cpi));
286 	xpt_setup_ccb(&cpi.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
287 	cpi.ccb_h.func_code = XPT_PATH_INQ;
288 	xpt_action((union ccb *)&cpi);
289 
290 	cam_periph_unlock(periph);
291 	softc->device_stats = devstat_new_entry("pt",
292 			  periph->unit_number, 0,
293 			  DEVSTAT_NO_BLOCKSIZE,
294 			  SID_TYPE(&cgd->inq_data) |
295 			  XPORT_DEVSTAT_TYPE(cpi.transport),
296 			  DEVSTAT_PRIORITY_OTHER);
297 
298 	softc->dev = make_dev(&pt_cdevsw, periph->unit_number, UID_ROOT,
299 			      GID_OPERATOR, 0600, "%s%d", periph->periph_name,
300 			      periph->unit_number);
301 	cam_periph_lock(periph);
302 	softc->dev->si_drv1 = periph;
303 
304 	/*
305 	 * Add async callbacks for bus reset and
306 	 * bus device reset calls.  I don't bother
307 	 * checking if this fails as, in most cases,
308 	 * the system will function just fine without
309 	 * them and the only alternative would be to
310 	 * not attach the device on failure.
311 	 */
312 	xpt_register_async(AC_SENT_BDR | AC_BUS_RESET | AC_LOST_DEVICE,
313 			   ptasync, periph, periph->path);
314 
315 	/* Tell the user we've attached to the device */
316 	xpt_announce_periph(periph, NULL);
317 
318 	return(CAM_REQ_CMP);
319 }
320 
321 static void
322 ptoninvalidate(struct cam_periph *periph)
323 {
324 	struct pt_softc *softc;
325 
326 	softc = (struct pt_softc *)periph->softc;
327 
328 	/*
329 	 * De-register any async callbacks.
330 	 */
331 	xpt_register_async(0, ptasync, periph, periph->path);
332 
333 	softc->flags |= PT_FLAG_DEVICE_INVALID;
334 
335 	/*
336 	 * Return all queued I/O with ENXIO.
337 	 * XXX Handle any transactions queued to the card
338 	 *     with XPT_ABORT_CCB.
339 	 */
340 	bioq_flush(&softc->bio_queue, NULL, ENXIO);
341 
342 	xpt_print(periph->path, "lost device\n");
343 }
344 
345 static void
346 ptdtor(struct cam_periph *periph)
347 {
348 	struct pt_softc *softc;
349 
350 	softc = (struct pt_softc *)periph->softc;
351 
352 	xpt_print(periph->path, "removing device entry\n");
353 	devstat_remove_entry(softc->device_stats);
354 	cam_periph_unlock(periph);
355 	destroy_dev(softc->dev);
356 	cam_periph_lock(periph);
357 	free(softc, M_DEVBUF);
358 }
359 
360 static void
361 ptasync(void *callback_arg, u_int32_t code, struct cam_path *path, void *arg)
362 {
363 	struct cam_periph *periph;
364 
365 	periph = (struct cam_periph *)callback_arg;
366 	switch (code) {
367 	case AC_FOUND_DEVICE:
368 	{
369 		struct ccb_getdev *cgd;
370 		cam_status status;
371 
372 		cgd = (struct ccb_getdev *)arg;
373 		if (cgd == NULL)
374 			break;
375 
376 		if (cgd->protocol != PROTO_SCSI)
377 			break;
378 
379 		if (SID_TYPE(&cgd->inq_data) != T_PROCESSOR)
380 			break;
381 
382 		/*
383 		 * Allocate a peripheral instance for
384 		 * this device and start the probe
385 		 * process.
386 		 */
387 		status = cam_periph_alloc(ptctor, ptoninvalidate, ptdtor,
388 					  ptstart, "pt", CAM_PERIPH_BIO,
389 					  cgd->ccb_h.path, ptasync,
390 					  AC_FOUND_DEVICE, cgd);
391 
392 		if (status != CAM_REQ_CMP
393 		 && status != CAM_REQ_INPROG)
394 			printf("ptasync: Unable to attach to new device "
395 				"due to status 0x%x\n", status);
396 		break;
397 	}
398 	case AC_SENT_BDR:
399 	case AC_BUS_RESET:
400 	{
401 		struct pt_softc *softc;
402 		struct ccb_hdr *ccbh;
403 
404 		softc = (struct pt_softc *)periph->softc;
405 		/*
406 		 * Don't fail on the expected unit attention
407 		 * that will occur.
408 		 */
409 		softc->flags |= PT_FLAG_RETRY_UA;
410 		LIST_FOREACH(ccbh, &softc->pending_ccbs, periph_links.le)
411 			ccbh->ccb_state |= PT_CCB_RETRY_UA;
412 	}
413 	/* FALLTHROUGH */
414 	default:
415 		cam_periph_async(periph, code, path, arg);
416 		break;
417 	}
418 }
419 
420 static void
421 ptstart(struct cam_periph *periph, union ccb *start_ccb)
422 {
423 	struct pt_softc *softc;
424 	struct bio *bp;
425 
426 	softc = (struct pt_softc *)periph->softc;
427 
428 	CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("ptstart\n"));
429 
430 	/*
431 	 * See if there is a buf with work for us to do..
432 	 */
433 	bp = bioq_first(&softc->bio_queue);
434 	if (periph->immediate_priority <= periph->pinfo.priority) {
435 		CAM_DEBUG(periph->path, CAM_DEBUG_SUBTRACE,
436 				("queuing for immediate ccb\n"));
437 		start_ccb->ccb_h.ccb_state = PT_CCB_WAITING;
438 		SLIST_INSERT_HEAD(&periph->ccb_list, &start_ccb->ccb_h,
439 				  periph_links.sle);
440 		periph->immediate_priority = CAM_PRIORITY_NONE;
441 		wakeup(&periph->ccb_list);
442 	} else if (bp == NULL) {
443 		xpt_release_ccb(start_ccb);
444 	} else {
445 		bioq_remove(&softc->bio_queue, bp);
446 
447 		devstat_start_transaction_bio(softc->device_stats, bp);
448 
449 		scsi_send_receive(&start_ccb->csio,
450 				  /*retries*/4,
451 				  ptdone,
452 				  MSG_SIMPLE_Q_TAG,
453 				  bp->bio_cmd == BIO_READ,
454 				  /*byte2*/0,
455 				  bp->bio_bcount,
456 				  bp->bio_data,
457 				  /*sense_len*/SSD_FULL_SIZE,
458 				  /*timeout*/softc->io_timeout);
459 
460 		start_ccb->ccb_h.ccb_state = PT_CCB_BUFFER_IO_UA;
461 
462 		/*
463 		 * Block out any asyncronous callbacks
464 		 * while we touch the pending ccb list.
465 		 */
466 		LIST_INSERT_HEAD(&softc->pending_ccbs, &start_ccb->ccb_h,
467 				 periph_links.le);
468 
469 		start_ccb->ccb_h.ccb_bp = bp;
470 		bp = bioq_first(&softc->bio_queue);
471 
472 		xpt_action(start_ccb);
473 
474 		if (bp != NULL) {
475 			/* Have more work to do, so ensure we stay scheduled */
476 			xpt_schedule(periph, CAM_PRIORITY_NORMAL);
477 		}
478 	}
479 }
480 
481 static void
482 ptdone(struct cam_periph *periph, union ccb *done_ccb)
483 {
484 	struct pt_softc *softc;
485 	struct ccb_scsiio *csio;
486 
487 	softc = (struct pt_softc *)periph->softc;
488 
489 	CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("ptdone\n"));
490 
491 	csio = &done_ccb->csio;
492 	switch (csio->ccb_h.ccb_state) {
493 	case PT_CCB_BUFFER_IO:
494 	case PT_CCB_BUFFER_IO_UA:
495 	{
496 		struct bio *bp;
497 
498 		bp = (struct bio *)done_ccb->ccb_h.ccb_bp;
499 		if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
500 			int error;
501 			int sf;
502 
503 			if ((csio->ccb_h.ccb_state & PT_CCB_RETRY_UA) != 0)
504 				sf = SF_RETRY_UA;
505 			else
506 				sf = 0;
507 
508 			error = pterror(done_ccb, CAM_RETRY_SELTO, sf);
509 			if (error == ERESTART) {
510 				/*
511 				 * A retry was scheuled, so
512 				 * just return.
513 				 */
514 				return;
515 			}
516 			if (error != 0) {
517 				if (error == ENXIO) {
518 					/*
519 					 * Catastrophic error.  Mark our device
520 					 * as invalid.
521 					 */
522 					xpt_print(periph->path,
523 					    "Invalidating device\n");
524 					softc->flags |= PT_FLAG_DEVICE_INVALID;
525 				}
526 
527 				/*
528 				 * return all queued I/O with EIO, so that
529 				 * the client can retry these I/Os in the
530 				 * proper order should it attempt to recover.
531 				 */
532 				bioq_flush(&softc->bio_queue, NULL, EIO);
533 				bp->bio_error = error;
534 				bp->bio_resid = bp->bio_bcount;
535 				bp->bio_flags |= BIO_ERROR;
536 			} else {
537 				bp->bio_resid = csio->resid;
538 				bp->bio_error = 0;
539 				if (bp->bio_resid != 0) {
540 					/* Short transfer ??? */
541 					bp->bio_flags |= BIO_ERROR;
542 				}
543 			}
544 			if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0)
545 				cam_release_devq(done_ccb->ccb_h.path,
546 						 /*relsim_flags*/0,
547 						 /*reduction*/0,
548 						 /*timeout*/0,
549 						 /*getcount_only*/0);
550 		} else {
551 			bp->bio_resid = csio->resid;
552 			if (bp->bio_resid != 0)
553 				bp->bio_flags |= BIO_ERROR;
554 		}
555 
556 		/*
557 		 * Block out any asyncronous callbacks
558 		 * while we touch the pending ccb list.
559 		 */
560 		LIST_REMOVE(&done_ccb->ccb_h, periph_links.le);
561 
562 		biofinish(bp, softc->device_stats, 0);
563 		break;
564 	}
565 	case PT_CCB_WAITING:
566 		/* Caller will release the CCB */
567 		wakeup(&done_ccb->ccb_h.cbfcnp);
568 		return;
569 	}
570 	xpt_release_ccb(done_ccb);
571 }
572 
573 static int
574 pterror(union ccb *ccb, u_int32_t cam_flags, u_int32_t sense_flags)
575 {
576 	struct pt_softc	  *softc;
577 	struct cam_periph *periph;
578 
579 	periph = xpt_path_periph(ccb->ccb_h.path);
580 	softc = (struct pt_softc *)periph->softc;
581 
582 	return(cam_periph_error(ccb, cam_flags, sense_flags,
583 				&softc->saved_ccb));
584 }
585 
586 static int
587 ptioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td)
588 {
589 	struct cam_periph *periph;
590 	struct pt_softc *softc;
591 	int error = 0;
592 
593 	periph = (struct cam_periph *)dev->si_drv1;
594 	if (periph == NULL)
595 		return(ENXIO);
596 
597 	softc = (struct pt_softc *)periph->softc;
598 
599 	cam_periph_lock(periph);
600 
601 	switch(cmd) {
602 	case PTIOCGETTIMEOUT:
603 		if (softc->io_timeout >= 1000)
604 			*(int *)addr = softc->io_timeout / 1000;
605 		else
606 			*(int *)addr = 0;
607 		break;
608 	case PTIOCSETTIMEOUT:
609 		if (*(int *)addr < 1) {
610 			error = EINVAL;
611 			break;
612 		}
613 
614 		softc->io_timeout = *(int *)addr * 1000;
615 
616 		break;
617 	default:
618 		error = cam_periph_ioctl(periph, cmd, addr, pterror);
619 		break;
620 	}
621 
622 	cam_periph_unlock(periph);
623 
624 	return(error);
625 }
626 
627 void
628 scsi_send_receive(struct ccb_scsiio *csio, u_int32_t retries,
629 		  void (*cbfcnp)(struct cam_periph *, union ccb *),
630 		  u_int tag_action, int readop, u_int byte2,
631 		  u_int32_t xfer_len, u_int8_t *data_ptr, u_int8_t sense_len,
632 		  u_int32_t timeout)
633 {
634 	struct scsi_send_receive *scsi_cmd;
635 
636 	scsi_cmd = (struct scsi_send_receive *)&csio->cdb_io.cdb_bytes;
637 	scsi_cmd->opcode = readop ? RECEIVE : SEND;
638 	scsi_cmd->byte2 = byte2;
639 	scsi_ulto3b(xfer_len, scsi_cmd->xfer_len);
640 	scsi_cmd->control = 0;
641 
642 	cam_fill_csio(csio,
643 		      retries,
644 		      cbfcnp,
645 		      /*flags*/readop ? CAM_DIR_IN : CAM_DIR_OUT,
646 		      tag_action,
647 		      data_ptr,
648 		      xfer_len,
649 		      sense_len,
650 		      sizeof(*scsi_cmd),
651 		      timeout);
652 }
653