xref: /freebsd/sys/cam/scsi/scsi_pt.c (revision 7660b554bc59a07be0431c17e0e33815818baa69)
1 /*
2  * Implementation of SCSI Processor Target Peripheral driver for CAM.
3  *
4  * Copyright (c) 1998 Justin T. Gibbs.
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions, and the following disclaimer,
12  *    without modification, immediately at the beginning of the file.
13  * 2. The name of the author may not be used to endorse or promote products
14  *    derived from this software without specific prior written permission.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
20  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26  * SUCH DAMAGE.
27  */
28 
29 #include <sys/cdefs.h>
30 __FBSDID("$FreeBSD$");
31 
32 #include <sys/param.h>
33 #include <sys/queue.h>
34 #include <sys/systm.h>
35 #include <sys/kernel.h>
36 #include <sys/types.h>
37 #include <sys/bio.h>
38 #include <sys/devicestat.h>
39 #include <sys/malloc.h>
40 #include <sys/conf.h>
41 #include <sys/ptio.h>
42 
43 #include <cam/cam.h>
44 #include <cam/cam_ccb.h>
45 #include <cam/cam_periph.h>
46 #include <cam/cam_xpt_periph.h>
47 #include <cam/cam_debug.h>
48 
49 #include <cam/scsi/scsi_all.h>
50 #include <cam/scsi/scsi_message.h>
51 #include <cam/scsi/scsi_pt.h>
52 
53 #include "opt_pt.h"
54 
55 typedef enum {
56 	PT_STATE_PROBE,
57 	PT_STATE_NORMAL
58 } pt_state;
59 
60 typedef enum {
61 	PT_FLAG_NONE		= 0x00,
62 	PT_FLAG_OPEN		= 0x01,
63 	PT_FLAG_DEVICE_INVALID	= 0x02,
64 	PT_FLAG_RETRY_UA	= 0x04
65 } pt_flags;
66 
67 typedef enum {
68 	PT_CCB_BUFFER_IO	= 0x01,
69 	PT_CCB_WAITING		= 0x02,
70 	PT_CCB_RETRY_UA		= 0x04,
71 	PT_CCB_BUFFER_IO_UA	= PT_CCB_BUFFER_IO|PT_CCB_RETRY_UA
72 } pt_ccb_state;
73 
74 /* Offsets into our private area for storing information */
75 #define ccb_state	ppriv_field0
76 #define ccb_bp		ppriv_ptr1
77 
78 struct pt_softc {
79 	struct	 bio_queue_head bio_queue;
80 	struct	 devstat *device_stats;
81 	LIST_HEAD(, ccb_hdr) pending_ccbs;
82 	pt_state state;
83 	pt_flags flags;
84 	union	 ccb saved_ccb;
85 	int	 io_timeout;
86 	dev_t	 dev;
87 };
88 
89 static	d_open_t	ptopen;
90 static	d_close_t	ptclose;
91 static	d_strategy_t	ptstrategy;
92 static	periph_init_t	ptinit;
93 static	void		ptasync(void *callback_arg, u_int32_t code,
94 				struct cam_path *path, void *arg);
95 static	periph_ctor_t	ptctor;
96 static	periph_oninv_t	ptoninvalidate;
97 static	periph_dtor_t	ptdtor;
98 static	periph_start_t	ptstart;
99 static	void		ptdone(struct cam_periph *periph,
100 			       union ccb *done_ccb);
101 static	d_ioctl_t	ptioctl;
102 static  int		pterror(union ccb *ccb, u_int32_t cam_flags,
103 				u_int32_t sense_flags);
104 
105 void	scsi_send_receive(struct ccb_scsiio *csio, u_int32_t retries,
106 			  void (*cbfcnp)(struct cam_periph *, union ccb *),
107 			  u_int tag_action, int readop, u_int byte2,
108 			  u_int32_t xfer_len, u_int8_t *data_ptr,
109 			  u_int8_t sense_len, u_int32_t timeout);
110 
111 static struct periph_driver ptdriver =
112 {
113 	ptinit, "pt",
114 	TAILQ_HEAD_INITIALIZER(ptdriver.units), /* generation */ 0
115 };
116 
117 PERIPHDRIVER_DECLARE(pt, ptdriver);
118 
119 #define PT_CDEV_MAJOR 61
120 
121 static struct cdevsw pt_cdevsw = {
122 	.d_open =	ptopen,
123 	.d_close =	ptclose,
124 	.d_read =	physread,
125 	.d_write =	physwrite,
126 	.d_ioctl =	ptioctl,
127 	.d_strategy =	ptstrategy,
128 	.d_name =	"pt",
129 	.d_maj =	PT_CDEV_MAJOR,
130 };
131 
132 #ifndef SCSI_PT_DEFAULT_TIMEOUT
133 #define SCSI_PT_DEFAULT_TIMEOUT		60
134 #endif
135 
136 static int
137 ptopen(dev_t dev, int flags, int fmt, struct thread *td)
138 {
139 	struct cam_periph *periph;
140 	struct pt_softc *softc;
141 	int unit;
142 	int error;
143 	int s;
144 
145 	unit = minor(dev);
146 	periph = (struct cam_periph *)dev->si_drv1;
147 	if (periph == NULL)
148 		return (ENXIO);
149 
150 	softc = (struct pt_softc *)periph->softc;
151 
152 	s = splsoftcam();
153 	if (softc->flags & PT_FLAG_DEVICE_INVALID) {
154 		splx(s);
155 		return(ENXIO);
156 	}
157 
158 	CAM_DEBUG(periph->path, CAM_DEBUG_TRACE,
159 	    ("ptopen: dev=%s (unit %d)\n", devtoname(dev), unit));
160 
161 	if ((error = cam_periph_lock(periph, PRIBIO|PCATCH)) != 0) {
162 		splx(s);
163 		return (error); /* error code from tsleep */
164 	}
165 
166 	splx(s);
167 
168 	if ((softc->flags & PT_FLAG_OPEN) == 0) {
169 		if (cam_periph_acquire(periph) != CAM_REQ_CMP)
170 			error = ENXIO;
171 		else
172 			softc->flags |= PT_FLAG_OPEN;
173 	} else
174 		error = EBUSY;
175 
176 	cam_periph_unlock(periph);
177 	return (error);
178 }
179 
180 static int
181 ptclose(dev_t dev, int flag, int fmt, struct thread *td)
182 {
183 	struct	cam_periph *periph;
184 	struct	pt_softc *softc;
185 	int	error;
186 
187 	periph = (struct cam_periph *)dev->si_drv1;
188 	if (periph == NULL)
189 		return (ENXIO);
190 
191 	softc = (struct pt_softc *)periph->softc;
192 
193 	if ((error = cam_periph_lock(periph, PRIBIO)) != 0)
194 		return (error); /* error code from tsleep */
195 
196 	softc->flags &= ~PT_FLAG_OPEN;
197 	cam_periph_unlock(periph);
198 	cam_periph_release(periph);
199 	return (0);
200 }
201 
202 /*
203  * Actually translate the requested transfer into one the physical driver
204  * can understand.  The transfer is described by a buf and will include
205  * only one physical transfer.
206  */
207 static void
208 ptstrategy(struct bio *bp)
209 {
210 	struct cam_periph *periph;
211 	struct pt_softc *softc;
212 	int    s;
213 
214 	periph = (struct cam_periph *)bp->bio_dev->si_drv1;
215 	bp->bio_resid = bp->bio_bcount;
216 	if (periph == NULL) {
217 		biofinish(bp, NULL, ENXIO);
218 		return;
219 	}
220 	softc = (struct pt_softc *)periph->softc;
221 
222 	/*
223 	 * Mask interrupts so that the pack cannot be invalidated until
224 	 * after we are in the queue.  Otherwise, we might not properly
225 	 * clean up one of the buffers.
226 	 */
227 	s = splbio();
228 
229 	/*
230 	 * If the device has been made invalid, error out
231 	 */
232 	if ((softc->flags & PT_FLAG_DEVICE_INVALID)) {
233 		splx(s);
234 		biofinish(bp, NULL, ENXIO);
235 		return;
236 	}
237 
238 	/*
239 	 * Place it in the queue of disk activities for this disk
240 	 */
241 	bioq_insert_tail(&softc->bio_queue, bp);
242 
243 	splx(s);
244 
245 	/*
246 	 * Schedule ourselves for performing the work.
247 	 */
248 	xpt_schedule(periph, /* XXX priority */1);
249 
250 	return;
251 }
252 
253 static void
254 ptinit(void)
255 {
256 	cam_status status;
257 	struct cam_path *path;
258 
259 	/*
260 	 * Install a global async callback.  This callback will
261 	 * receive async callbacks like "new device found".
262 	 */
263 	status = xpt_create_path(&path, /*periph*/NULL, CAM_XPT_PATH_ID,
264 				 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
265 
266 	if (status == CAM_REQ_CMP) {
267 		struct ccb_setasync csa;
268 
269                 xpt_setup_ccb(&csa.ccb_h, path, /*priority*/5);
270                 csa.ccb_h.func_code = XPT_SASYNC_CB;
271                 csa.event_enable = AC_FOUND_DEVICE;
272                 csa.callback = ptasync;
273                 csa.callback_arg = NULL;
274                 xpt_action((union ccb *)&csa);
275 		status = csa.ccb_h.status;
276                 xpt_free_path(path);
277         }
278 
279 	if (status != CAM_REQ_CMP) {
280 		printf("pt: Failed to attach master async callback "
281 		       "due to status 0x%x!\n", status);
282 	}
283 }
284 
285 static cam_status
286 ptctor(struct cam_periph *periph, void *arg)
287 {
288 	struct pt_softc *softc;
289 	struct ccb_setasync csa;
290 	struct ccb_getdev *cgd;
291 
292 	cgd = (struct ccb_getdev *)arg;
293 	if (periph == NULL) {
294 		printf("ptregister: periph was NULL!!\n");
295 		return(CAM_REQ_CMP_ERR);
296 	}
297 
298 	if (cgd == NULL) {
299 		printf("ptregister: no getdev CCB, can't register device\n");
300 		return(CAM_REQ_CMP_ERR);
301 	}
302 
303 	softc = (struct pt_softc *)malloc(sizeof(*softc),M_DEVBUF,M_NOWAIT);
304 
305 	if (softc == NULL) {
306 		printf("daregister: Unable to probe new device. "
307 		       "Unable to allocate softc\n");
308 		return(CAM_REQ_CMP_ERR);
309 	}
310 
311 	bzero(softc, sizeof(*softc));
312 	LIST_INIT(&softc->pending_ccbs);
313 	softc->state = PT_STATE_NORMAL;
314 	bioq_init(&softc->bio_queue);
315 
316 	softc->io_timeout = SCSI_PT_DEFAULT_TIMEOUT * 1000;
317 
318 	periph->softc = softc;
319 
320 	softc->device_stats = devstat_new_entry("pt",
321 			  periph->unit_number, 0,
322 			  DEVSTAT_NO_BLOCKSIZE,
323 			  SID_TYPE(&cgd->inq_data) | DEVSTAT_TYPE_IF_SCSI,
324 			  DEVSTAT_PRIORITY_OTHER);
325 
326 	softc->dev = make_dev(&pt_cdevsw, periph->unit_number, UID_ROOT,
327 			      GID_OPERATOR, 0600, "%s%d", periph->periph_name,
328 			      periph->unit_number);
329 	softc->dev->si_drv1 = periph;
330 
331 	/*
332 	 * Add async callbacks for bus reset and
333 	 * bus device reset calls.  I don't bother
334 	 * checking if this fails as, in most cases,
335 	 * the system will function just fine without
336 	 * them and the only alternative would be to
337 	 * not attach the device on failure.
338 	 */
339 	xpt_setup_ccb(&csa.ccb_h, periph->path, /*priority*/5);
340 	csa.ccb_h.func_code = XPT_SASYNC_CB;
341 	csa.event_enable = AC_SENT_BDR | AC_BUS_RESET | AC_LOST_DEVICE;
342 	csa.callback = ptasync;
343 	csa.callback_arg = periph;
344 	xpt_action((union ccb *)&csa);
345 
346 	/* Tell the user we've attached to the device */
347 	xpt_announce_periph(periph, NULL);
348 
349 	return(CAM_REQ_CMP);
350 }
351 
352 static void
353 ptoninvalidate(struct cam_periph *periph)
354 {
355 	int s;
356 	struct pt_softc *softc;
357 	struct ccb_setasync csa;
358 
359 	softc = (struct pt_softc *)periph->softc;
360 
361 	/*
362 	 * De-register any async callbacks.
363 	 */
364 	xpt_setup_ccb(&csa.ccb_h, periph->path,
365 		      /* priority */ 5);
366 	csa.ccb_h.func_code = XPT_SASYNC_CB;
367 	csa.event_enable = 0;
368 	csa.callback = ptasync;
369 	csa.callback_arg = periph;
370 	xpt_action((union ccb *)&csa);
371 
372 	softc->flags |= PT_FLAG_DEVICE_INVALID;
373 
374 	/*
375 	 * Although the oninvalidate() routines are always called at
376 	 * splsoftcam, we need to be at splbio() here to keep the buffer
377 	 * queue from being modified while we traverse it.
378 	 */
379 	s = splbio();
380 
381 	/*
382 	 * Return all queued I/O with ENXIO.
383 	 * XXX Handle any transactions queued to the card
384 	 *     with XPT_ABORT_CCB.
385 	 */
386 	bioq_flush(&softc->bio_queue, NULL, ENXIO);
387 
388 	splx(s);
389 
390 	xpt_print_path(periph->path);
391 	printf("lost device\n");
392 }
393 
394 static void
395 ptdtor(struct cam_periph *periph)
396 {
397 	struct pt_softc *softc;
398 
399 	softc = (struct pt_softc *)periph->softc;
400 
401 	devstat_remove_entry(softc->device_stats);
402 
403 	destroy_dev(softc->dev);
404 
405 	xpt_print_path(periph->path);
406 	printf("removing device entry\n");
407 	free(softc, M_DEVBUF);
408 }
409 
410 static void
411 ptasync(void *callback_arg, u_int32_t code, struct cam_path *path, void *arg)
412 {
413 	struct cam_periph *periph;
414 
415 	periph = (struct cam_periph *)callback_arg;
416 	switch (code) {
417 	case AC_FOUND_DEVICE:
418 	{
419 		struct ccb_getdev *cgd;
420 		cam_status status;
421 
422 		cgd = (struct ccb_getdev *)arg;
423 		if (cgd == NULL)
424 			break;
425 
426 		if (SID_TYPE(&cgd->inq_data) != T_PROCESSOR)
427 			break;
428 
429 		/*
430 		 * Allocate a peripheral instance for
431 		 * this device and start the probe
432 		 * process.
433 		 */
434 		status = cam_periph_alloc(ptctor, ptoninvalidate, ptdtor,
435 					  ptstart, "pt", CAM_PERIPH_BIO,
436 					  cgd->ccb_h.path, ptasync,
437 					  AC_FOUND_DEVICE, cgd);
438 
439 		if (status != CAM_REQ_CMP
440 		 && status != CAM_REQ_INPROG)
441 			printf("ptasync: Unable to attach to new device "
442 				"due to status 0x%x\n", status);
443 		break;
444 	}
445 	case AC_SENT_BDR:
446 	case AC_BUS_RESET:
447 	{
448 		struct pt_softc *softc;
449 		struct ccb_hdr *ccbh;
450 		int s;
451 
452 		softc = (struct pt_softc *)periph->softc;
453 		s = splsoftcam();
454 		/*
455 		 * Don't fail on the expected unit attention
456 		 * that will occur.
457 		 */
458 		softc->flags |= PT_FLAG_RETRY_UA;
459 		LIST_FOREACH(ccbh, &softc->pending_ccbs, periph_links.le)
460 			ccbh->ccb_state |= PT_CCB_RETRY_UA;
461 		splx(s);
462 	}
463 	/* FALLTHROUGH */
464 	default:
465 		cam_periph_async(periph, code, path, arg);
466 		break;
467 	}
468 }
469 
470 static void
471 ptstart(struct cam_periph *periph, union ccb *start_ccb)
472 {
473 	struct pt_softc *softc;
474 	struct bio *bp;
475 	int s;
476 
477 	softc = (struct pt_softc *)periph->softc;
478 
479 	/*
480 	 * See if there is a buf with work for us to do..
481 	 */
482 	s = splbio();
483 	bp = bioq_first(&softc->bio_queue);
484 	if (periph->immediate_priority <= periph->pinfo.priority) {
485 		CAM_DEBUG_PRINT(CAM_DEBUG_SUBTRACE,
486 				("queuing for immediate ccb\n"));
487 		start_ccb->ccb_h.ccb_state = PT_CCB_WAITING;
488 		SLIST_INSERT_HEAD(&periph->ccb_list, &start_ccb->ccb_h,
489 				  periph_links.sle);
490 		periph->immediate_priority = CAM_PRIORITY_NONE;
491 		splx(s);
492 		wakeup(&periph->ccb_list);
493 	} else if (bp == NULL) {
494 		splx(s);
495 		xpt_release_ccb(start_ccb);
496 	} else {
497 		int oldspl;
498 
499 		bioq_remove(&softc->bio_queue, bp);
500 
501 		devstat_start_transaction_bio(softc->device_stats, bp);
502 
503 		scsi_send_receive(&start_ccb->csio,
504 				  /*retries*/4,
505 				  ptdone,
506 				  MSG_SIMPLE_Q_TAG,
507 				  bp->bio_cmd == BIO_READ,
508 				  /*byte2*/0,
509 				  bp->bio_bcount,
510 				  bp->bio_data,
511 				  /*sense_len*/SSD_FULL_SIZE,
512 				  /*timeout*/softc->io_timeout);
513 
514 		start_ccb->ccb_h.ccb_state = PT_CCB_BUFFER_IO_UA;
515 
516 		/*
517 		 * Block out any asyncronous callbacks
518 		 * while we touch the pending ccb list.
519 		 */
520 		oldspl = splcam();
521 		LIST_INSERT_HEAD(&softc->pending_ccbs, &start_ccb->ccb_h,
522 				 periph_links.le);
523 		splx(oldspl);
524 
525 		start_ccb->ccb_h.ccb_bp = bp;
526 		bp = bioq_first(&softc->bio_queue);
527 		splx(s);
528 
529 		xpt_action(start_ccb);
530 
531 		if (bp != NULL) {
532 			/* Have more work to do, so ensure we stay scheduled */
533 			xpt_schedule(periph, /* XXX priority */1);
534 		}
535 	}
536 }
537 
538 static void
539 ptdone(struct cam_periph *periph, union ccb *done_ccb)
540 {
541 	struct pt_softc *softc;
542 	struct ccb_scsiio *csio;
543 
544 	softc = (struct pt_softc *)periph->softc;
545 	csio = &done_ccb->csio;
546 	switch (csio->ccb_h.ccb_state) {
547 	case PT_CCB_BUFFER_IO:
548 	case PT_CCB_BUFFER_IO_UA:
549 	{
550 		struct bio *bp;
551 		int    oldspl;
552 
553 		bp = (struct bio *)done_ccb->ccb_h.ccb_bp;
554 		if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
555 			int error;
556 			int s;
557 			int sf;
558 
559 			if ((csio->ccb_h.ccb_state & PT_CCB_RETRY_UA) != 0)
560 				sf = SF_RETRY_UA;
561 			else
562 				sf = 0;
563 
564 			error = pterror(done_ccb, CAM_RETRY_SELTO, sf);
565 			if (error == ERESTART) {
566 				/*
567 				 * A retry was scheuled, so
568 				 * just return.
569 				 */
570 				return;
571 			}
572 			if (error != 0) {
573 				s = splbio();
574 
575 				if (error == ENXIO) {
576 					/*
577 					 * Catastrophic error.  Mark our device
578 					 * as invalid.
579 					 */
580 					xpt_print_path(periph->path);
581 					printf("Invalidating device\n");
582 					softc->flags |= PT_FLAG_DEVICE_INVALID;
583 				}
584 
585 				/*
586 				 * return all queued I/O with EIO, so that
587 				 * the client can retry these I/Os in the
588 				 * proper order should it attempt to recover.
589 				 */
590 				bioq_flush(&softc->bio_queue, NULL, EIO);
591 				splx(s);
592 				bp->bio_error = error;
593 				bp->bio_resid = bp->bio_bcount;
594 				bp->bio_flags |= BIO_ERROR;
595 			} else {
596 				bp->bio_resid = csio->resid;
597 				bp->bio_error = 0;
598 				if (bp->bio_resid != 0) {
599 					/* Short transfer ??? */
600 					bp->bio_flags |= BIO_ERROR;
601 				}
602 			}
603 			if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0)
604 				cam_release_devq(done_ccb->ccb_h.path,
605 						 /*relsim_flags*/0,
606 						 /*reduction*/0,
607 						 /*timeout*/0,
608 						 /*getcount_only*/0);
609 		} else {
610 			bp->bio_resid = csio->resid;
611 			if (bp->bio_resid != 0)
612 				bp->bio_flags |= BIO_ERROR;
613 		}
614 
615 		/*
616 		 * Block out any asyncronous callbacks
617 		 * while we touch the pending ccb list.
618 		 */
619 		oldspl = splcam();
620 		LIST_REMOVE(&done_ccb->ccb_h, periph_links.le);
621 		splx(oldspl);
622 
623 		biofinish(bp, softc->device_stats, 0);
624 		break;
625 	}
626 	case PT_CCB_WAITING:
627 		/* Caller will release the CCB */
628 		wakeup(&done_ccb->ccb_h.cbfcnp);
629 		return;
630 	}
631 	xpt_release_ccb(done_ccb);
632 }
633 
634 static int
635 pterror(union ccb *ccb, u_int32_t cam_flags, u_int32_t sense_flags)
636 {
637 	struct pt_softc	  *softc;
638 	struct cam_periph *periph;
639 
640 	periph = xpt_path_periph(ccb->ccb_h.path);
641 	softc = (struct pt_softc *)periph->softc;
642 
643 	return(cam_periph_error(ccb, cam_flags, sense_flags,
644 				&softc->saved_ccb));
645 }
646 
647 static int
648 ptioctl(dev_t dev, u_long cmd, caddr_t addr, int flag, struct thread *td)
649 {
650 	struct cam_periph *periph;
651 	struct pt_softc *softc;
652 	int error;
653 
654 	periph = (struct cam_periph *)dev->si_drv1;
655 	if (periph == NULL)
656 		return(ENXIO);
657 
658 	softc = (struct pt_softc *)periph->softc;
659 
660 	if ((error = cam_periph_lock(periph, PRIBIO|PCATCH)) != 0) {
661 		return (error); /* error code from tsleep */
662 	}
663 
664 	switch(cmd) {
665 	case PTIOCGETTIMEOUT:
666 		if (softc->io_timeout >= 1000)
667 			*(int *)addr = softc->io_timeout / 1000;
668 		else
669 			*(int *)addr = 0;
670 		break;
671 	case PTIOCSETTIMEOUT:
672 	{
673 		int s;
674 
675 		if (*(int *)addr < 1) {
676 			error = EINVAL;
677 			break;
678 		}
679 
680 		s = splsoftcam();
681 		softc->io_timeout = *(int *)addr * 1000;
682 		splx(s);
683 
684 		break;
685 	}
686 	default:
687 		error = cam_periph_ioctl(periph, cmd, addr, pterror);
688 		break;
689 	}
690 
691 	cam_periph_unlock(periph);
692 
693 	return(error);
694 }
695 
696 void
697 scsi_send_receive(struct ccb_scsiio *csio, u_int32_t retries,
698 		  void (*cbfcnp)(struct cam_periph *, union ccb *),
699 		  u_int tag_action, int readop, u_int byte2,
700 		  u_int32_t xfer_len, u_int8_t *data_ptr, u_int8_t sense_len,
701 		  u_int32_t timeout)
702 {
703 	struct scsi_send_receive *scsi_cmd;
704 
705 	scsi_cmd = (struct scsi_send_receive *)&csio->cdb_io.cdb_bytes;
706 	scsi_cmd->opcode = readop ? RECEIVE : SEND;
707 	scsi_cmd->byte2 = byte2;
708 	scsi_ulto3b(xfer_len, scsi_cmd->xfer_len);
709 	scsi_cmd->control = 0;
710 
711 	cam_fill_csio(csio,
712 		      retries,
713 		      cbfcnp,
714 		      /*flags*/readop ? CAM_DIR_IN : CAM_DIR_OUT,
715 		      tag_action,
716 		      data_ptr,
717 		      xfer_len,
718 		      sense_len,
719 		      sizeof(*scsi_cmd),
720 		      timeout);
721 }
722