xref: /freebsd/sys/cam/scsi/scsi_pt.c (revision 7447ca0eb235974642312b9555caec00b57d8fc1) 
1 /*-
2  * Implementation of SCSI Processor Target Peripheral driver for CAM.
3  *
4  * Copyright (c) 1998 Justin T. Gibbs.
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions, and the following disclaimer,
12  *    without modification, immediately at the beginning of the file.
13  * 2. The name of the author may not be used to endorse or promote products
14  *    derived from this software without specific prior written permission.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
20  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26  * SUCH DAMAGE.
27  */
28 
29 #include <sys/cdefs.h>
30 __FBSDID("$FreeBSD$");
31 
32 #include <sys/param.h>
33 #include <sys/queue.h>
34 #include <sys/systm.h>
35 #include <sys/kernel.h>
36 #include <sys/types.h>
37 #include <sys/bio.h>
38 #include <sys/devicestat.h>
39 #include <sys/malloc.h>
40 #include <sys/conf.h>
41 #include <sys/ptio.h>
42 
43 #include <cam/cam.h>
44 #include <cam/cam_ccb.h>
45 #include <cam/cam_periph.h>
46 #include <cam/cam_xpt_periph.h>
47 #include <cam/cam_debug.h>
48 
49 #include <cam/scsi/scsi_all.h>
50 #include <cam/scsi/scsi_message.h>
51 #include <cam/scsi/scsi_pt.h>
52 
53 #include "opt_pt.h"
54 
55 typedef enum {
56 	PT_STATE_PROBE,
57 	PT_STATE_NORMAL
58 } pt_state;
59 
60 typedef enum {
61 	PT_FLAG_NONE		= 0x00,
62 	PT_FLAG_OPEN		= 0x01,
63 	PT_FLAG_DEVICE_INVALID	= 0x02,
64 	PT_FLAG_RETRY_UA	= 0x04
65 } pt_flags;
66 
67 typedef enum {
68 	PT_CCB_BUFFER_IO	= 0x01,
69 	PT_CCB_RETRY_UA		= 0x04,
70 	PT_CCB_BUFFER_IO_UA	= PT_CCB_BUFFER_IO|PT_CCB_RETRY_UA
71 } pt_ccb_state;
72 
73 /* Offsets into our private area for storing information */
74 #define ccb_state	ppriv_field0
75 #define ccb_bp		ppriv_ptr1
76 
77 struct pt_softc {
78 	struct	 bio_queue_head bio_queue;
79 	struct	 devstat *device_stats;
80 	LIST_HEAD(, ccb_hdr) pending_ccbs;
81 	pt_state state;
82 	pt_flags flags;
83 	union	 ccb saved_ccb;
84 	int	 io_timeout;
85 	struct cdev *dev;
86 };
87 
88 static	d_open_t	ptopen;
89 static	d_close_t	ptclose;
90 static	d_strategy_t	ptstrategy;
91 static	periph_init_t	ptinit;
92 static	void		ptasync(void *callback_arg, u_int32_t code,
93 				struct cam_path *path, void *arg);
94 static	periph_ctor_t	ptctor;
95 static	periph_oninv_t	ptoninvalidate;
96 static	periph_dtor_t	ptdtor;
97 static	periph_start_t	ptstart;
98 static	void		ptdone(struct cam_periph *periph,
99 			       union ccb *done_ccb);
100 static	d_ioctl_t	ptioctl;
101 static  int		pterror(union ccb *ccb, u_int32_t cam_flags,
102 				u_int32_t sense_flags);
103 
104 void	scsi_send_receive(struct ccb_scsiio *csio, u_int32_t retries,
105 			  void (*cbfcnp)(struct cam_periph *, union ccb *),
106 			  u_int tag_action, int readop, u_int byte2,
107 			  u_int32_t xfer_len, u_int8_t *data_ptr,
108 			  u_int8_t sense_len, u_int32_t timeout);
109 
110 static struct periph_driver ptdriver =
111 {
112 	ptinit, "pt",
113 	TAILQ_HEAD_INITIALIZER(ptdriver.units), /* generation */ 0
114 };
115 
116 PERIPHDRIVER_DECLARE(pt, ptdriver);
117 
118 
119 static struct cdevsw pt_cdevsw = {
120 	.d_version =	D_VERSION,
121 	.d_flags =	0,
122 	.d_open =	ptopen,
123 	.d_close =	ptclose,
124 	.d_read =	physread,
125 	.d_write =	physwrite,
126 	.d_ioctl =	ptioctl,
127 	.d_strategy =	ptstrategy,
128 	.d_name =	"pt",
129 };
130 
131 #ifndef SCSI_PT_DEFAULT_TIMEOUT
132 #define SCSI_PT_DEFAULT_TIMEOUT		60
133 #endif
134 
135 static int
136 ptopen(struct cdev *dev, int flags, int fmt, struct thread *td)
137 {
138 	struct cam_periph *periph;
139 	struct pt_softc *softc;
140 	int error = 0;
141 
142 	periph = (struct cam_periph *)dev->si_drv1;
143 	if (cam_periph_acquire(periph) != CAM_REQ_CMP)
144 		return (ENXIO);
145 
146 	softc = (struct pt_softc *)periph->softc;
147 
148 	cam_periph_lock(periph);
149 	if (softc->flags & PT_FLAG_DEVICE_INVALID) {
150 		cam_periph_release_locked(periph);
151 		cam_periph_unlock(periph);
152 		return(ENXIO);
153 	}
154 
155 	if ((softc->flags & PT_FLAG_OPEN) == 0)
156 		softc->flags |= PT_FLAG_OPEN;
157 	else {
158 		error = EBUSY;
159 		cam_periph_release(periph);
160 	}
161 
162 	CAM_DEBUG(periph->path, CAM_DEBUG_TRACE,
163 	    ("ptopen: dev=%s\n", devtoname(dev)));
164 
165 	cam_periph_unlock(periph);
166 	return (error);
167 }
168 
169 static int
170 ptclose(struct cdev *dev, int flag, int fmt, struct thread *td)
171 {
172 	struct	cam_periph *periph;
173 	struct	pt_softc *softc;
174 
175 	periph = (struct cam_periph *)dev->si_drv1;
176 	softc = (struct pt_softc *)periph->softc;
177 
178 	cam_periph_lock(periph);
179 
180 	softc->flags &= ~PT_FLAG_OPEN;
181 	cam_periph_release_locked(periph);
182 	cam_periph_unlock(periph);
183 	return (0);
184 }
185 
186 /*
187  * Actually translate the requested transfer into one the physical driver
188  * can understand.  The transfer is described by a buf and will include
189  * only one physical transfer.
190  */
191 static void
192 ptstrategy(struct bio *bp)
193 {
194 	struct cam_periph *periph;
195 	struct pt_softc *softc;
196 
197 	periph = (struct cam_periph *)bp->bio_dev->si_drv1;
198 	bp->bio_resid = bp->bio_bcount;
199 	if (periph == NULL) {
200 		biofinish(bp, NULL, ENXIO);
201 		return;
202 	}
203 	cam_periph_lock(periph);
204 	softc = (struct pt_softc *)periph->softc;
205 
206 	/*
207 	 * If the device has been made invalid, error out
208 	 */
209 	if ((softc->flags & PT_FLAG_DEVICE_INVALID)) {
210 		cam_periph_unlock(periph);
211 		biofinish(bp, NULL, ENXIO);
212 		return;
213 	}
214 
215 	/*
216 	 * Place it in the queue of disk activities for this disk
217 	 */
218 	bioq_insert_tail(&softc->bio_queue, bp);
219 
220 	/*
221 	 * Schedule ourselves for performing the work.
222 	 */
223 	xpt_schedule(periph, CAM_PRIORITY_NORMAL);
224 	cam_periph_unlock(periph);
225 
226 	return;
227 }
228 
229 static void
230 ptinit(void)
231 {
232 	cam_status status;
233 
234 	/*
235 	 * Install a global async callback.  This callback will
236 	 * receive async callbacks like "new device found".
237 	 */
238 	status = xpt_register_async(AC_FOUND_DEVICE, ptasync, NULL, NULL);
239 
240 	if (status != CAM_REQ_CMP) {
241 		printf("pt: Failed to attach master async callback "
242 		       "due to status 0x%x!\n", status);
243 	}
244 }
245 
246 static cam_status
247 ptctor(struct cam_periph *periph, void *arg)
248 {
249 	struct pt_softc *softc;
250 	struct ccb_getdev *cgd;
251 	struct ccb_pathinq cpi;
252 	struct make_dev_args args;
253 	int error;
254 
255 	cgd = (struct ccb_getdev *)arg;
256 	if (cgd == NULL) {
257 		printf("ptregister: no getdev CCB, can't register device\n");
258 		return(CAM_REQ_CMP_ERR);
259 	}
260 
261 	softc = (struct pt_softc *)malloc(sizeof(*softc),M_DEVBUF,M_NOWAIT);
262 
263 	if (softc == NULL) {
264 		printf("daregister: Unable to probe new device. "
265 		       "Unable to allocate softc\n");
266 		return(CAM_REQ_CMP_ERR);
267 	}
268 
269 	bzero(softc, sizeof(*softc));
270 	LIST_INIT(&softc->pending_ccbs);
271 	softc->state = PT_STATE_NORMAL;
272 	bioq_init(&softc->bio_queue);
273 
274 	softc->io_timeout = SCSI_PT_DEFAULT_TIMEOUT * 1000;
275 
276 	periph->softc = softc;
277 
278 	bzero(&cpi, sizeof(cpi));
279 	xpt_setup_ccb(&cpi.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
280 	cpi.ccb_h.func_code = XPT_PATH_INQ;
281 	xpt_action((union ccb *)&cpi);
282 
283 	cam_periph_unlock(periph);
284 
285 	make_dev_args_init(&args);
286 	args.mda_devsw = &pt_cdevsw;
287 	args.mda_unit = periph->unit_number;
288 	args.mda_uid = UID_ROOT;
289 	args.mda_gid = GID_OPERATOR;
290 	args.mda_mode = 0600;
291 	args.mda_si_drv1 = periph;
292 	error = make_dev_s(&args, &softc->dev, "%s%d", periph->periph_name,
293 	    periph->unit_number);
294 	if (error != 0) {
295 		cam_periph_lock(periph);
296 		return (CAM_REQ_CMP_ERR);
297 	}
298 
299 	softc->device_stats = devstat_new_entry("pt",
300 			  periph->unit_number, 0,
301 			  DEVSTAT_NO_BLOCKSIZE,
302 			  SID_TYPE(&cgd->inq_data) |
303 			  XPORT_DEVSTAT_TYPE(cpi.transport),
304 			  DEVSTAT_PRIORITY_OTHER);
305 
306 	cam_periph_lock(periph);
307 
308 	/*
309 	 * Add async callbacks for bus reset and
310 	 * bus device reset calls.  I don't bother
311 	 * checking if this fails as, in most cases,
312 	 * the system will function just fine without
313 	 * them and the only alternative would be to
314 	 * not attach the device on failure.
315 	 */
316 	xpt_register_async(AC_SENT_BDR | AC_BUS_RESET | AC_LOST_DEVICE,
317 			   ptasync, periph, periph->path);
318 
319 	/* Tell the user we've attached to the device */
320 	xpt_announce_periph(periph, NULL);
321 
322 	return(CAM_REQ_CMP);
323 }
324 
325 static void
326 ptoninvalidate(struct cam_periph *periph)
327 {
328 	struct pt_softc *softc;
329 
330 	softc = (struct pt_softc *)periph->softc;
331 
332 	/*
333 	 * De-register any async callbacks.
334 	 */
335 	xpt_register_async(0, ptasync, periph, periph->path);
336 
337 	softc->flags |= PT_FLAG_DEVICE_INVALID;
338 
339 	/*
340 	 * Return all queued I/O with ENXIO.
341 	 * XXX Handle any transactions queued to the card
342 	 *     with XPT_ABORT_CCB.
343 	 */
344 	bioq_flush(&softc->bio_queue, NULL, ENXIO);
345 }
346 
347 static void
348 ptdtor(struct cam_periph *periph)
349 {
350 	struct pt_softc *softc;
351 
352 	softc = (struct pt_softc *)periph->softc;
353 
354 	devstat_remove_entry(softc->device_stats);
355 	cam_periph_unlock(periph);
356 	destroy_dev(softc->dev);
357 	cam_periph_lock(periph);
358 	free(softc, M_DEVBUF);
359 }
360 
361 static void
362 ptasync(void *callback_arg, u_int32_t code, struct cam_path *path, void *arg)
363 {
364 	struct cam_periph *periph;
365 
366 	periph = (struct cam_periph *)callback_arg;
367 	switch (code) {
368 	case AC_FOUND_DEVICE:
369 	{
370 		struct ccb_getdev *cgd;
371 		cam_status status;
372 
373 		cgd = (struct ccb_getdev *)arg;
374 		if (cgd == NULL)
375 			break;
376 
377 		if (cgd->protocol != PROTO_SCSI)
378 			break;
379 		if (SID_QUAL(&cgd->inq_data) != SID_QUAL_LU_CONNECTED)
380 			break;
381 		if (SID_TYPE(&cgd->inq_data) != T_PROCESSOR)
382 			break;
383 
384 		/*
385 		 * Allocate a peripheral instance for
386 		 * this device and start the probe
387 		 * process.
388 		 */
389 		status = cam_periph_alloc(ptctor, ptoninvalidate, ptdtor,
390 					  ptstart, "pt", CAM_PERIPH_BIO,
391 					  path, ptasync,
392 					  AC_FOUND_DEVICE, cgd);
393 
394 		if (status != CAM_REQ_CMP
395 		 && status != CAM_REQ_INPROG)
396 			printf("ptasync: Unable to attach to new device "
397 				"due to status 0x%x\n", status);
398 		break;
399 	}
400 	case AC_SENT_BDR:
401 	case AC_BUS_RESET:
402 	{
403 		struct pt_softc *softc;
404 		struct ccb_hdr *ccbh;
405 
406 		softc = (struct pt_softc *)periph->softc;
407 		/*
408 		 * Don't fail on the expected unit attention
409 		 * that will occur.
410 		 */
411 		softc->flags |= PT_FLAG_RETRY_UA;
412 		LIST_FOREACH(ccbh, &softc->pending_ccbs, periph_links.le)
413 			ccbh->ccb_state |= PT_CCB_RETRY_UA;
414 	}
415 	/* FALLTHROUGH */
416 	default:
417 		cam_periph_async(periph, code, path, arg);
418 		break;
419 	}
420 }
421 
422 static void
423 ptstart(struct cam_periph *periph, union ccb *start_ccb)
424 {
425 	struct pt_softc *softc;
426 	struct bio *bp;
427 
428 	softc = (struct pt_softc *)periph->softc;
429 
430 	CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("ptstart\n"));
431 
432 	/*
433 	 * See if there is a buf with work for us to do..
434 	 */
435 	bp = bioq_first(&softc->bio_queue);
436 	if (bp == NULL) {
437 		xpt_release_ccb(start_ccb);
438 	} else {
439 		bioq_remove(&softc->bio_queue, bp);
440 
441 		devstat_start_transaction_bio(softc->device_stats, bp);
442 
443 		scsi_send_receive(&start_ccb->csio,
444 				  /*retries*/4,
445 				  ptdone,
446 				  MSG_SIMPLE_Q_TAG,
447 				  bp->bio_cmd == BIO_READ,
448 				  /*byte2*/0,
449 				  bp->bio_bcount,
450 				  bp->bio_data,
451 				  /*sense_len*/SSD_FULL_SIZE,
452 				  /*timeout*/softc->io_timeout);
453 
454 		start_ccb->ccb_h.ccb_state = PT_CCB_BUFFER_IO_UA;
455 
456 		/*
457 		 * Block out any asynchronous callbacks
458 		 * while we touch the pending ccb list.
459 		 */
460 		LIST_INSERT_HEAD(&softc->pending_ccbs, &start_ccb->ccb_h,
461 				 periph_links.le);
462 
463 		start_ccb->ccb_h.ccb_bp = bp;
464 		bp = bioq_first(&softc->bio_queue);
465 
466 		xpt_action(start_ccb);
467 
468 		if (bp != NULL) {
469 			/* Have more work to do, so ensure we stay scheduled */
470 			xpt_schedule(periph, CAM_PRIORITY_NORMAL);
471 		}
472 	}
473 }
474 
475 static void
476 ptdone(struct cam_periph *periph, union ccb *done_ccb)
477 {
478 	struct pt_softc *softc;
479 	struct ccb_scsiio *csio;
480 
481 	softc = (struct pt_softc *)periph->softc;
482 
483 	CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("ptdone\n"));
484 
485 	csio = &done_ccb->csio;
486 	switch (csio->ccb_h.ccb_state) {
487 	case PT_CCB_BUFFER_IO:
488 	case PT_CCB_BUFFER_IO_UA:
489 	{
490 		struct bio *bp;
491 
492 		bp = (struct bio *)done_ccb->ccb_h.ccb_bp;
493 		if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
494 			int error;
495 			int sf;
496 
497 			if ((csio->ccb_h.ccb_state & PT_CCB_RETRY_UA) != 0)
498 				sf = SF_RETRY_UA;
499 			else
500 				sf = 0;
501 
502 			error = pterror(done_ccb, CAM_RETRY_SELTO, sf);
503 			if (error == ERESTART) {
504 				/*
505 				 * A retry was scheuled, so
506 				 * just return.
507 				 */
508 				return;
509 			}
510 			if (error != 0) {
511 				if (error == ENXIO) {
512 					/*
513 					 * Catastrophic error.  Mark our device
514 					 * as invalid.
515 					 */
516 					xpt_print(periph->path,
517 					    "Invalidating device\n");
518 					softc->flags |= PT_FLAG_DEVICE_INVALID;
519 				}
520 
521 				/*
522 				 * return all queued I/O with EIO, so that
523 				 * the client can retry these I/Os in the
524 				 * proper order should it attempt to recover.
525 				 */
526 				bioq_flush(&softc->bio_queue, NULL, EIO);
527 				bp->bio_error = error;
528 				bp->bio_resid = bp->bio_bcount;
529 				bp->bio_flags |= BIO_ERROR;
530 			} else {
531 				bp->bio_resid = csio->resid;
532 				bp->bio_error = 0;
533 				if (bp->bio_resid != 0) {
534 					/* Short transfer ??? */
535 					bp->bio_flags |= BIO_ERROR;
536 				}
537 			}
538 			if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0)
539 				cam_release_devq(done_ccb->ccb_h.path,
540 						 /*relsim_flags*/0,
541 						 /*reduction*/0,
542 						 /*timeout*/0,
543 						 /*getcount_only*/0);
544 		} else {
545 			bp->bio_resid = csio->resid;
546 			if (bp->bio_resid != 0)
547 				bp->bio_flags |= BIO_ERROR;
548 		}
549 
550 		/*
551 		 * Block out any asynchronous callbacks
552 		 * while we touch the pending ccb list.
553 		 */
554 		LIST_REMOVE(&done_ccb->ccb_h, periph_links.le);
555 
556 		biofinish(bp, softc->device_stats, 0);
557 		break;
558 	}
559 	}
560 	xpt_release_ccb(done_ccb);
561 }
562 
563 static int
564 pterror(union ccb *ccb, u_int32_t cam_flags, u_int32_t sense_flags)
565 {
566 	struct pt_softc	  *softc;
567 	struct cam_periph *periph;
568 
569 	periph = xpt_path_periph(ccb->ccb_h.path);
570 	softc = (struct pt_softc *)periph->softc;
571 
572 	return(cam_periph_error(ccb, cam_flags, sense_flags,
573 				&softc->saved_ccb));
574 }
575 
576 static int
577 ptioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td)
578 {
579 	struct cam_periph *periph;
580 	struct pt_softc *softc;
581 	int error = 0;
582 
583 	periph = (struct cam_periph *)dev->si_drv1;
584 	softc = (struct pt_softc *)periph->softc;
585 
586 	cam_periph_lock(periph);
587 
588 	switch(cmd) {
589 	case PTIOCGETTIMEOUT:
590 		if (softc->io_timeout >= 1000)
591 			*(int *)addr = softc->io_timeout / 1000;
592 		else
593 			*(int *)addr = 0;
594 		break;
595 	case PTIOCSETTIMEOUT:
596 		if (*(int *)addr < 1) {
597 			error = EINVAL;
598 			break;
599 		}
600 
601 		softc->io_timeout = *(int *)addr * 1000;
602 
603 		break;
604 	default:
605 		error = cam_periph_ioctl(periph, cmd, addr, pterror);
606 		break;
607 	}
608 
609 	cam_periph_unlock(periph);
610 
611 	return(error);
612 }
613 
614 void
615 scsi_send_receive(struct ccb_scsiio *csio, u_int32_t retries,
616 		  void (*cbfcnp)(struct cam_periph *, union ccb *),
617 		  u_int tag_action, int readop, u_int byte2,
618 		  u_int32_t xfer_len, u_int8_t *data_ptr, u_int8_t sense_len,
619 		  u_int32_t timeout)
620 {
621 	struct scsi_send_receive *scsi_cmd;
622 
623 	scsi_cmd = (struct scsi_send_receive *)&csio->cdb_io.cdb_bytes;
624 	scsi_cmd->opcode = readop ? RECEIVE : SEND;
625 	scsi_cmd->byte2 = byte2;
626 	scsi_ulto3b(xfer_len, scsi_cmd->xfer_len);
627 	scsi_cmd->control = 0;
628 
629 	cam_fill_csio(csio,
630 		      retries,
631 		      cbfcnp,
632 		      /*flags*/readop ? CAM_DIR_IN : CAM_DIR_OUT,
633 		      tag_action,
634 		      data_ptr,
635 		      xfer_len,
636 		      sense_len,
637 		      sizeof(*scsi_cmd),
638 		      timeout);
639 }
640