1 /*- 2 * Copyright (c) 2000 Matthew Jacob 3 * Copyright (c) 2010 Spectra Logic Corporation 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions, and the following disclaimer, 11 * without modification, immediately at the beginning of the file. 12 * 2. The name of the author may not be used to endorse or promote products 13 * derived from this software without specific prior written permission. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 19 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 */ 27 28 /** 29 * \file scsi_enc_ses.c 30 * 31 * Structures and routines specific && private to SES only 32 */ 33 34 #include <sys/cdefs.h> 35 __FBSDID("$FreeBSD$"); 36 37 #include <sys/param.h> 38 39 #include <sys/ctype.h> 40 #include <sys/errno.h> 41 #include <sys/kernel.h> 42 #include <sys/lock.h> 43 #include <sys/malloc.h> 44 #include <sys/mutex.h> 45 #include <sys/queue.h> 46 #include <sys/sbuf.h> 47 #include <sys/sx.h> 48 #include <sys/systm.h> 49 #include <sys/types.h> 50 51 #include <cam/cam.h> 52 #include <cam/cam_ccb.h> 53 #include <cam/cam_xpt_periph.h> 54 #include <cam/cam_periph.h> 55 56 #include <cam/scsi/scsi_message.h> 57 #include <cam/scsi/scsi_enc.h> 58 #include <cam/scsi/scsi_enc_internal.h> 59 60 /* SES Native Type Device Support */ 61 62 /* SES Diagnostic Page Codes */ 63 typedef enum { 64 SesSupportedPages = 0x0, 65 SesConfigPage = 0x1, 66 SesControlPage = 0x2, 67 SesStatusPage = SesControlPage, 68 SesHelpTxt = 0x3, 69 SesStringOut = 0x4, 70 SesStringIn = SesStringOut, 71 SesThresholdOut = 0x5, 72 SesThresholdIn = SesThresholdOut, 73 SesArrayControl = 0x6, /* Obsolete in SES v2 */ 74 SesArrayStatus = SesArrayControl, 75 SesElementDescriptor = 0x7, 76 SesShortStatus = 0x8, 77 SesEnclosureBusy = 0x9, 78 SesAddlElementStatus = 0xa 79 } SesDiagPageCodes; 80 81 typedef struct ses_type { 82 const struct ses_elm_type_desc *hdr; 83 const char *text; 84 } ses_type_t; 85 86 typedef struct ses_comstat { 87 uint8_t comstatus; 88 uint8_t comstat[3]; 89 } ses_comstat_t; 90 91 typedef union ses_addl_data { 92 struct ses_elm_sas_device_phy *sasdev_phys; 93 struct ses_elm_sas_expander_phy *sasexp_phys; 94 struct ses_elm_sas_port_phy *sasport_phys; 95 struct ses_fcobj_port *fc_ports; 96 } ses_add_data_t; 97 98 typedef struct ses_addl_status { 99 struct ses_elm_addlstatus_base_hdr *hdr; 100 union { 101 union ses_fcobj_hdr *fc; 102 union ses_elm_sas_hdr *sas; 103 } proto_hdr; 104 union ses_addl_data proto_data; /* array sizes stored in header */ 105 } ses_add_status_t; 106 107 typedef struct ses_element { 108 uint8_t eip; /* eip bit is set */ 109 uint16_t descr_len; /* length of the descriptor */ 110 char *descr; /* descriptor for this object */ 111 struct ses_addl_status addl; /* additional status info */ 112 } ses_element_t; 113 114 typedef struct ses_control_request { 115 int elm_idx; 116 ses_comstat_t elm_stat; 117 int result; 118 TAILQ_ENTRY(ses_control_request) links; 119 } ses_control_request_t; 120 TAILQ_HEAD(ses_control_reqlist, ses_control_request); 121 typedef struct ses_control_reqlist ses_control_reqlist_t; 122 enum { 123 SES_SETSTATUS_ENC_IDX = -1 124 }; 125 126 static void 127 ses_terminate_control_requests(ses_control_reqlist_t *reqlist, int result) 128 { 129 ses_control_request_t *req; 130 131 while ((req = TAILQ_FIRST(reqlist)) != NULL) { 132 TAILQ_REMOVE(reqlist, req, links); 133 req->result = result; 134 wakeup(req); 135 } 136 } 137 138 enum ses_iter_index_values { 139 /** 140 * \brief Value of an initialized but invalid index 141 * in a ses_iterator object. 142 * 143 * This value is used for the individual_element_index of 144 * overal status elements and for all index types when 145 * an iterator is first initialized. 146 */ 147 ITERATOR_INDEX_INVALID = -1, 148 149 /** 150 * \brief Value of an index in a ses_iterator object 151 * when the iterator has traversed past the last 152 * valid element.. 153 */ 154 ITERATOR_INDEX_END = INT_MAX 155 }; 156 157 /** 158 * \brief Structure encapsulating all data necessary to traverse the 159 * elements of a SES configuration. 160 * 161 * The ses_iterator object simplifies the task of iterating through all 162 * elements detected via the SES configuration page by tracking the numerous 163 * element indexes that, instead of memoizing in the softc, we calculate 164 * on the fly during the traversal of the element objects. The various 165 * indexes are necessary due to the varying needs of matching objects in 166 * the different SES pages. Some pages (e.g. Status/Control) contain all 167 * elements, while others (e.g. Additional Element Status) only contain 168 * individual elements (no overal status elements) of particular types. 169 * 170 * To use an iterator, initialize it with ses_iter_init(), and then 171 * use ses_iter_next() to traverse the elements (including the first) in 172 * the configuration. Once an iterator is initiailized with ses_iter_init(), 173 * you may also seek to any particular element by either it's global or 174 * individual element index via the ses_iter_seek_to() function. You may 175 * also return an iterator to the position just before the first element 176 * (i.e. the same state as after an ses_iter_init()), with ses_iter_reset(). 177 */ 178 struct ses_iterator { 179 /** 180 * \brief Backlink to the overal software configuration structure. 181 * 182 * This is included for convenience so the iteration functions 183 * need only take a single, struct ses_iterator *, argument. 184 */ 185 enc_softc_t *enc; 186 187 enc_cache_t *cache; 188 189 /** 190 * \brief Index of the type of the current element within the 191 * ses_cache's ses_types array. 192 */ 193 int type_index; 194 195 /** 196 * \brief The position (0 based) of this element relative to all other 197 * elements of this type. 198 * 199 * This index resets to zero every time the iterator transitions 200 * to elements of a new type in the configuration. 201 */ 202 int type_element_index; 203 204 /** 205 * \brief The position (0 based) of this element relative to all 206 * other individual status elements in the configuration. 207 * 208 * This index ranges from 0 through the number of individual 209 * elements in the configuration. When the iterator returns 210 * an overall status element, individual_element_index is 211 * set to ITERATOR_INDEX_INVALID, to indicate that it does 212 * not apply to the current element. 213 */ 214 int individual_element_index; 215 216 /** 217 * \brief The position (0 based) of this element relative to 218 * all elements in the configration. 219 * 220 * This index is appropriate for indexing into enc->ses_elm_map. 221 */ 222 int global_element_index; 223 224 /** 225 * \brief The last valid individual element index of this 226 * iterator. 227 * 228 * When an iterator traverses an overal status element, the 229 * individual element index is reset to ITERATOR_INDEX_INVALID 230 * to prevent unintential use of the individual_element_index 231 * field. The saved_individual_element_index allows the iterator 232 * to restore it's position in the individual elements upon 233 * reaching the next individual element. 234 */ 235 int saved_individual_element_index; 236 }; 237 238 typedef enum { 239 SES_UPDATE_NONE, 240 SES_UPDATE_PAGES, 241 SES_UPDATE_GETCONFIG, 242 SES_UPDATE_GETSTATUS, 243 SES_UPDATE_GETELMDESCS, 244 SES_UPDATE_GETELMADDLSTATUS, 245 SES_PROCESS_CONTROL_REQS, 246 SES_PUBLISH_PHYSPATHS, 247 SES_PUBLISH_CACHE, 248 SES_NUM_UPDATE_STATES 249 } ses_update_action; 250 251 static enc_softc_cleanup_t ses_softc_cleanup; 252 253 #define SCSZ 0x8000 254 255 static fsm_fill_handler_t ses_fill_rcv_diag_io; 256 static fsm_fill_handler_t ses_fill_control_request; 257 static fsm_done_handler_t ses_process_pages; 258 static fsm_done_handler_t ses_process_config; 259 static fsm_done_handler_t ses_process_status; 260 static fsm_done_handler_t ses_process_elm_descs; 261 static fsm_done_handler_t ses_process_elm_addlstatus; 262 static fsm_done_handler_t ses_process_control_request; 263 static fsm_done_handler_t ses_publish_physpaths; 264 static fsm_done_handler_t ses_publish_cache; 265 266 static struct enc_fsm_state enc_fsm_states[SES_NUM_UPDATE_STATES] = 267 { 268 { "SES_UPDATE_NONE", 0, 0, 0, NULL, NULL, NULL }, 269 { 270 "SES_UPDATE_PAGES", 271 SesSupportedPages, 272 SCSZ, 273 60 * 1000, 274 ses_fill_rcv_diag_io, 275 ses_process_pages, 276 enc_error 277 }, 278 { 279 "SES_UPDATE_GETCONFIG", 280 SesConfigPage, 281 SCSZ, 282 60 * 1000, 283 ses_fill_rcv_diag_io, 284 ses_process_config, 285 enc_error 286 }, 287 { 288 "SES_UPDATE_GETSTATUS", 289 SesStatusPage, 290 SCSZ, 291 60 * 1000, 292 ses_fill_rcv_diag_io, 293 ses_process_status, 294 enc_error 295 }, 296 { 297 "SES_UPDATE_GETELMDESCS", 298 SesElementDescriptor, 299 SCSZ, 300 60 * 1000, 301 ses_fill_rcv_diag_io, 302 ses_process_elm_descs, 303 enc_error 304 }, 305 { 306 "SES_UPDATE_GETELMADDLSTATUS", 307 SesAddlElementStatus, 308 SCSZ, 309 60 * 1000, 310 ses_fill_rcv_diag_io, 311 ses_process_elm_addlstatus, 312 enc_error 313 }, 314 { 315 "SES_PROCESS_CONTROL_REQS", 316 SesControlPage, 317 SCSZ, 318 60 * 1000, 319 ses_fill_control_request, 320 ses_process_control_request, 321 enc_error 322 }, 323 { 324 "SES_PUBLISH_PHYSPATHS", 325 0, 326 0, 327 0, 328 NULL, 329 ses_publish_physpaths, 330 NULL 331 }, 332 { 333 "SES_PUBLISH_CACHE", 334 0, 335 0, 336 0, 337 NULL, 338 ses_publish_cache, 339 NULL 340 } 341 }; 342 343 typedef struct ses_cache { 344 /* Source for all the configuration data pointers */ 345 const struct ses_cfg_page *cfg_page; 346 347 /* References into the config page. */ 348 int ses_nsubencs; 349 const struct ses_enc_desc * const *subencs; 350 int ses_ntypes; 351 const ses_type_t *ses_types; 352 353 /* Source for all the status pointers */ 354 const struct ses_status_page *status_page; 355 356 /* Source for all the object descriptor pointers */ 357 const struct ses_elem_descr_page *elm_descs_page; 358 359 /* Source for all the additional object status pointers */ 360 const struct ses_addl_elem_status_page *elm_addlstatus_page; 361 362 } ses_cache_t; 363 364 typedef struct ses_softc { 365 uint32_t ses_flags; 366 #define SES_FLAG_TIMEDCOMP 0x01 367 #define SES_FLAG_ADDLSTATUS 0x02 368 #define SES_FLAG_DESC 0x04 369 370 ses_control_reqlist_t ses_requests; 371 ses_control_reqlist_t ses_pending_requests; 372 } ses_softc_t; 373 374 /** 375 * \brief Reset a SES iterator to just before the first element 376 * in the configuration. 377 * 378 * \param iter The iterator object to reset. 379 * 380 * The indexes within a reset iterator are invalid and will only 381 * become valid upon completion of a ses_iter_seek_to() or a 382 * ses_iter_next(). 383 */ 384 static void 385 ses_iter_reset(struct ses_iterator *iter) 386 { 387 /* 388 * Set our indexes to just before the first valid element 389 * of the first type (ITERATOR_INDEX_INVALID == -1). This 390 * simplifies the implementation of ses_iter_next(). 391 */ 392 iter->type_index = 0; 393 iter->type_element_index = ITERATOR_INDEX_INVALID; 394 iter->global_element_index = ITERATOR_INDEX_INVALID; 395 iter->individual_element_index = ITERATOR_INDEX_INVALID; 396 iter->saved_individual_element_index = ITERATOR_INDEX_INVALID; 397 } 398 399 /** 400 * \brief Initialize the storage of a SES iterator and reset it to 401 * the position just before the first element of the 402 * configuration. 403 * 404 * \param enc The SES softc for the SES instance whose configuration 405 * will be enumerated by this iterator. 406 * \param iter The iterator object to initialize. 407 */ 408 static void 409 ses_iter_init(enc_softc_t *enc, enc_cache_t *cache, struct ses_iterator *iter) 410 { 411 iter->enc = enc; 412 iter->cache = cache; 413 ses_iter_reset(iter); 414 } 415 416 /** 417 * \brief Traverse the provided SES iterator to the next element 418 * within the configuraiton. 419 * 420 * \param iter The iterator to move. 421 * 422 * \return If a valid next element exists, a pointer to it's enc_element_t. 423 * Otherwise NULL. 424 */ 425 static enc_element_t * 426 ses_iter_next(struct ses_iterator *iter) 427 { 428 ses_cache_t *ses_cache; 429 const ses_type_t *element_type; 430 431 ses_cache = iter->cache->private; 432 433 /* 434 * Note: Treat nelms as signed, so we will hit this case 435 * and immediately terminate the iteration if the 436 * configuration has 0 objects. 437 */ 438 if (iter->global_element_index >= (int)iter->cache->nelms - 1) { 439 440 /* Elements exhausted. */ 441 iter->type_index = ITERATOR_INDEX_END; 442 iter->type_element_index = ITERATOR_INDEX_END; 443 iter->global_element_index = ITERATOR_INDEX_END; 444 iter->individual_element_index = ITERATOR_INDEX_END; 445 return (NULL); 446 } 447 448 KASSERT((iter->type_index < ses_cache->ses_ntypes), 449 ("Corrupted element iterator. %d not less than %d", 450 iter->type_index, ses_cache->ses_ntypes)); 451 452 element_type = &ses_cache->ses_types[iter->type_index]; 453 iter->global_element_index++; 454 iter->type_element_index++; 455 456 /* 457 * There is an object for overal type status in addition 458 * to one for each allowed element, but only if the element 459 * count is non-zero. 460 */ 461 if (iter->type_element_index > element_type->hdr->etype_maxelt) { 462 463 /* 464 * We've exhausted the elements of this type. 465 * This next element belongs to the next type. 466 */ 467 iter->type_index++; 468 iter->type_element_index = 0; 469 iter->saved_individual_element_index 470 = iter->individual_element_index; 471 iter->individual_element_index = ITERATOR_INDEX_INVALID; 472 } 473 474 if (iter->type_element_index > 0) { 475 if (iter->type_element_index == 1) { 476 iter->individual_element_index 477 = iter->saved_individual_element_index; 478 } 479 iter->individual_element_index++; 480 } 481 482 return (&iter->cache->elm_map[iter->global_element_index]); 483 } 484 485 /** 486 * Element index types tracked by a SES iterator. 487 */ 488 typedef enum { 489 /** 490 * Index relative to all elements (overall and individual) 491 * in the system. 492 */ 493 SES_ELEM_INDEX_GLOBAL, 494 495 /** 496 * \brief Index relative to all individual elements in the system. 497 * 498 * This index counts only individual elements, skipping overall 499 * status elements. This is the index space of the additional 500 * element status page (page 0xa). 501 */ 502 SES_ELEM_INDEX_INDIVIDUAL 503 } ses_elem_index_type_t; 504 505 /** 506 * \brief Move the provided iterator forwards or backwards to the object 507 * having the give index. 508 * 509 * \param iter The iterator on which to perform the seek. 510 * \param element_index The index of the element to find. 511 * \param index_type The type (global or individual) of element_index. 512 * 513 * \return If the element is found, a pointer to it's enc_element_t. 514 * Otherwise NULL. 515 */ 516 static enc_element_t * 517 ses_iter_seek_to(struct ses_iterator *iter, int element_index, 518 ses_elem_index_type_t index_type) 519 { 520 enc_element_t *element; 521 int *cur_index; 522 523 if (index_type == SES_ELEM_INDEX_GLOBAL) 524 cur_index = &iter->global_element_index; 525 else 526 cur_index = &iter->individual_element_index; 527 528 if (*cur_index == element_index) { 529 /* Already there. */ 530 return (&iter->cache->elm_map[iter->global_element_index]); 531 } 532 533 ses_iter_reset(iter); 534 while ((element = ses_iter_next(iter)) != NULL 535 && *cur_index != element_index) 536 ; 537 538 if (*cur_index != element_index) 539 return (NULL); 540 541 return (element); 542 } 543 544 #if 0 545 static int ses_encode(enc_softc_t *, uint8_t *, int, int, 546 struct ses_comstat *); 547 #endif 548 static int ses_set_timed_completion(enc_softc_t *, uint8_t); 549 #if 0 550 static int ses_putstatus(enc_softc_t *, int, struct ses_comstat *); 551 #endif 552 553 static void ses_print_addl_data(enc_softc_t *, enc_element_t *); 554 555 /*=========================== SES cleanup routines ===========================*/ 556 557 static void 558 ses_cache_free_elm_addlstatus(enc_softc_t *enc, enc_cache_t *cache) 559 { 560 ses_cache_t *ses_cache; 561 ses_cache_t *other_ses_cache; 562 enc_element_t *cur_elm; 563 enc_element_t *last_elm; 564 565 ENC_DLOG(enc, "%s: enter\n", __func__); 566 ses_cache = cache->private; 567 if (ses_cache->elm_addlstatus_page == NULL) 568 return; 569 570 for (cur_elm = cache->elm_map, 571 last_elm = &cache->elm_map[cache->nelms]; 572 cur_elm != last_elm; cur_elm++) { 573 ses_element_t *elmpriv; 574 575 elmpriv = cur_elm->elm_private; 576 577 /* Clear references to the additional status page. */ 578 bzero(&elmpriv->addl, sizeof(elmpriv->addl)); 579 } 580 581 other_ses_cache = enc_other_cache(enc, cache)->private; 582 if (other_ses_cache->elm_addlstatus_page 583 != ses_cache->elm_addlstatus_page) 584 ENC_FREE(ses_cache->elm_addlstatus_page); 585 ses_cache->elm_addlstatus_page = NULL; 586 } 587 588 static void 589 ses_cache_free_elm_descs(enc_softc_t *enc, enc_cache_t *cache) 590 { 591 ses_cache_t *ses_cache; 592 ses_cache_t *other_ses_cache; 593 enc_element_t *cur_elm; 594 enc_element_t *last_elm; 595 596 ENC_DLOG(enc, "%s: enter\n", __func__); 597 ses_cache = cache->private; 598 if (ses_cache->elm_descs_page == NULL) 599 return; 600 601 for (cur_elm = cache->elm_map, 602 last_elm = &cache->elm_map[cache->nelms]; 603 cur_elm != last_elm; cur_elm++) { 604 ses_element_t *elmpriv; 605 606 elmpriv = cur_elm->elm_private; 607 elmpriv->descr_len = 0; 608 elmpriv->descr = NULL; 609 } 610 611 other_ses_cache = enc_other_cache(enc, cache)->private; 612 if (other_ses_cache->elm_descs_page 613 != ses_cache->elm_descs_page) 614 ENC_FREE(ses_cache->elm_descs_page); 615 ses_cache->elm_descs_page = NULL; 616 } 617 618 static void 619 ses_cache_free_status(enc_softc_t *enc, enc_cache_t *cache) 620 { 621 ses_cache_t *ses_cache; 622 ses_cache_t *other_ses_cache; 623 624 ENC_DLOG(enc, "%s: enter\n", __func__); 625 ses_cache = cache->private; 626 if (ses_cache->status_page == NULL) 627 return; 628 629 other_ses_cache = enc_other_cache(enc, cache)->private; 630 if (other_ses_cache->status_page != ses_cache->status_page) 631 ENC_FREE(ses_cache->status_page); 632 ses_cache->status_page = NULL; 633 } 634 635 static void 636 ses_cache_free_elm_map(enc_softc_t *enc, enc_cache_t *cache) 637 { 638 enc_element_t *cur_elm; 639 enc_element_t *last_elm; 640 641 ENC_DLOG(enc, "%s: enter\n", __func__); 642 if (cache->elm_map == NULL) 643 return; 644 645 ses_cache_free_elm_descs(enc, cache); 646 ses_cache_free_elm_addlstatus(enc, cache); 647 for (cur_elm = cache->elm_map, 648 last_elm = &cache->elm_map[cache->nelms]; 649 cur_elm != last_elm; cur_elm++) { 650 651 ENC_FREE_AND_NULL(cur_elm->elm_private); 652 } 653 ENC_FREE_AND_NULL(cache->elm_map); 654 cache->nelms = 0; 655 ENC_DLOG(enc, "%s: exit\n", __func__); 656 } 657 658 static void 659 ses_cache_free(enc_softc_t *enc, enc_cache_t *cache) 660 { 661 ses_cache_t *other_ses_cache; 662 ses_cache_t *ses_cache; 663 664 ENC_DLOG(enc, "%s: enter\n", __func__); 665 ses_cache_free_elm_addlstatus(enc, cache); 666 ses_cache_free_status(enc, cache); 667 ses_cache_free_elm_map(enc, cache); 668 669 ses_cache = cache->private; 670 ses_cache->ses_ntypes = 0; 671 672 other_ses_cache = enc_other_cache(enc, cache)->private; 673 if (other_ses_cache->subencs != ses_cache->subencs) 674 ENC_FREE(ses_cache->subencs); 675 ses_cache->subencs = NULL; 676 677 if (other_ses_cache->ses_types != ses_cache->ses_types) 678 ENC_FREE(ses_cache->ses_types); 679 ses_cache->ses_types = NULL; 680 681 if (other_ses_cache->cfg_page != ses_cache->cfg_page) 682 ENC_FREE(ses_cache->cfg_page); 683 ses_cache->cfg_page = NULL; 684 685 ENC_DLOG(enc, "%s: exit\n", __func__); 686 } 687 688 static void 689 ses_cache_clone(enc_softc_t *enc, enc_cache_t *src, enc_cache_t *dst) 690 { 691 ses_cache_t *dst_ses_cache; 692 ses_cache_t *src_ses_cache; 693 enc_element_t *src_elm; 694 enc_element_t *dst_elm; 695 enc_element_t *last_elm; 696 697 ses_cache_free(enc, dst); 698 src_ses_cache = src->private; 699 dst_ses_cache = dst->private; 700 701 /* 702 * The cloned enclosure cache and ses specific cache are 703 * mostly identical to the source. 704 */ 705 *dst = *src; 706 *dst_ses_cache = *src_ses_cache; 707 708 /* 709 * But the ses cache storage is still independent. Restore 710 * the pointer that was clobbered by the structure copy above. 711 */ 712 dst->private = dst_ses_cache; 713 714 /* 715 * The element map is independent even though it starts out 716 * pointing to the same constant page data. 717 */ 718 dst->elm_map = malloc(dst->nelms * sizeof(enc_element_t), 719 M_SCSIENC, M_WAITOK); 720 memcpy(dst->elm_map, src->elm_map, dst->nelms * sizeof(enc_element_t)); 721 for (dst_elm = dst->elm_map, src_elm = src->elm_map, 722 last_elm = &src->elm_map[src->nelms]; 723 src_elm != last_elm; src_elm++, dst_elm++) { 724 725 dst_elm->elm_private = malloc(sizeof(ses_element_t), 726 M_SCSIENC, M_WAITOK); 727 memcpy(dst_elm->elm_private, src_elm->elm_private, 728 sizeof(ses_element_t)); 729 } 730 } 731 732 /* Structure accessors. These are strongly typed to avoid errors. */ 733 734 int 735 ses_elm_sas_descr_type(union ses_elm_sas_hdr *obj) 736 { 737 return ((obj)->base_hdr.byte1 >> 6); 738 } 739 int 740 ses_elm_addlstatus_proto(struct ses_elm_addlstatus_base_hdr *hdr) 741 { 742 return ((hdr)->byte0 & 0xf); 743 } 744 int 745 ses_elm_addlstatus_eip(struct ses_elm_addlstatus_base_hdr *hdr) 746 { 747 return ((hdr)->byte0 >> 4) & 0x1; 748 } 749 int 750 ses_elm_addlstatus_invalid(struct ses_elm_addlstatus_base_hdr *hdr) 751 { 752 return ((hdr)->byte0 >> 7); 753 } 754 int 755 ses_elm_sas_type0_not_all_phys(union ses_elm_sas_hdr *hdr) 756 { 757 return ((hdr)->type0_noneip.byte1 & 0x1); 758 } 759 int 760 ses_elm_sas_dev_phy_sata_dev(struct ses_elm_sas_device_phy *phy) 761 { 762 return ((phy)->target_ports & 0x1); 763 } 764 int 765 ses_elm_sas_dev_phy_sata_port(struct ses_elm_sas_device_phy *phy) 766 { 767 return ((phy)->target_ports >> 7); 768 } 769 int 770 ses_elm_sas_dev_phy_dev_type(struct ses_elm_sas_device_phy *phy) 771 { 772 return (((phy)->byte0 >> 4) & 0x7); 773 } 774 775 /** 776 * \brief Verify that the cached configuration data in our softc 777 * is valid for processing the page data corresponding to 778 * the provided page header. 779 * 780 * \param ses_cache The SES cache to validate. 781 * \param gen_code The 4 byte generation code from a SES diagnostic 782 * page header. 783 * 784 * \return non-zero if true, 0 if false. 785 */ 786 static int 787 ses_config_cache_valid(ses_cache_t *ses_cache, const uint8_t *gen_code) 788 { 789 uint32_t cache_gc; 790 uint32_t cur_gc; 791 792 if (ses_cache->cfg_page == NULL) 793 return (0); 794 795 cache_gc = scsi_4btoul(ses_cache->cfg_page->hdr.gen_code); 796 cur_gc = scsi_4btoul(gen_code); 797 return (cache_gc == cur_gc); 798 } 799 800 /** 801 * Function signature for consumers of the ses_devids_iter() interface. 802 */ 803 typedef void ses_devid_callback_t(enc_softc_t *, enc_element_t *, 804 struct scsi_vpd_id_descriptor *, void *); 805 806 /** 807 * \brief Iterate over and create vpd device id records from the 808 * additional element status data for elm, passing that data 809 * to the provided callback. 810 * 811 * \param enc SES instance containing elm 812 * \param elm Element for which to extract device ID data. 813 * \param callback The callback function to invoke on each generated 814 * device id descriptor for elm. 815 * \param callback_arg Argument passed through to callback on each invocation. 816 */ 817 static void 818 ses_devids_iter(enc_softc_t *enc, enc_element_t *elm, 819 ses_devid_callback_t *callback, void *callback_arg) 820 { 821 ses_element_t *elmpriv; 822 struct ses_addl_status *addl; 823 u_int i; 824 size_t devid_record_size; 825 826 elmpriv = elm->elm_private; 827 addl = &(elmpriv->addl); 828 829 /* 830 * Don't assume this object has additional status information, or 831 * that it is a SAS device, or that it is a device slot device. 832 */ 833 if (addl->hdr == NULL || addl->proto_hdr.sas == NULL 834 || addl->proto_data.sasdev_phys == NULL) 835 return; 836 837 devid_record_size = SVPD_DEVICE_ID_DESC_HDR_LEN 838 + sizeof(struct scsi_vpd_id_naa_ieee_reg); 839 for (i = 0; i < addl->proto_hdr.sas->base_hdr.num_phys; i++) { 840 uint8_t devid_buf[devid_record_size]; 841 struct scsi_vpd_id_descriptor *devid; 842 uint8_t *phy_addr; 843 844 devid = (struct scsi_vpd_id_descriptor *)devid_buf; 845 phy_addr = addl->proto_data.sasdev_phys[i].phy_addr; 846 devid->proto_codeset = (SCSI_PROTO_SAS << SVPD_ID_PROTO_SHIFT) 847 | SVPD_ID_CODESET_BINARY; 848 devid->id_type = SVPD_ID_PIV 849 | SVPD_ID_ASSOC_PORT 850 | SVPD_ID_TYPE_NAA; 851 devid->reserved = 0; 852 devid->length = sizeof(struct scsi_vpd_id_naa_ieee_reg); 853 memcpy(devid->identifier, phy_addr, devid->length); 854 855 callback(enc, elm, devid, callback_arg); 856 } 857 } 858 859 /** 860 * Function signature for consumers of the ses_paths_iter() interface. 861 */ 862 typedef void ses_path_callback_t(enc_softc_t *, enc_element_t *, 863 struct cam_path *, void *); 864 865 /** 866 * Argument package passed through ses_devids_iter() by 867 * ses_paths_iter() to ses_path_iter_devid_callback(). 868 */ 869 typedef struct ses_path_iter_args { 870 ses_path_callback_t *callback; 871 void *callback_arg; 872 } ses_path_iter_args_t; 873 874 /** 875 * ses_devids_iter() callback function used by ses_paths_iter() 876 * to map device ids to peripheral driver instances. 877 * 878 * \param enc SES instance containing elm 879 * \param elm Element on which device ID matching is active. 880 * \param periph A device ID corresponding to elm. 881 * \param arg Argument passed through to callback on each invocation. 882 */ 883 static void 884 ses_path_iter_devid_callback(enc_softc_t *enc, enc_element_t *elem, 885 struct scsi_vpd_id_descriptor *devid, 886 void *arg) 887 { 888 struct ccb_dev_match cdm; 889 struct dev_match_pattern match_pattern; 890 struct dev_match_result match_result; 891 struct device_match_result *device_match; 892 struct device_match_pattern *device_pattern; 893 ses_path_iter_args_t *args; 894 895 args = (ses_path_iter_args_t *)arg; 896 match_pattern.type = DEV_MATCH_DEVICE; 897 device_pattern = &match_pattern.pattern.device_pattern; 898 device_pattern->flags = DEV_MATCH_DEVID; 899 device_pattern->data.devid_pat.id_len = 900 offsetof(struct scsi_vpd_id_descriptor, identifier) 901 + devid->length; 902 memcpy(device_pattern->data.devid_pat.id, devid, 903 device_pattern->data.devid_pat.id_len); 904 905 memset(&cdm, 0, sizeof(cdm)); 906 if (xpt_create_path(&cdm.ccb_h.path, /*periph*/NULL, 907 CAM_XPT_PATH_ID, 908 CAM_TARGET_WILDCARD, 909 CAM_LUN_WILDCARD) != CAM_REQ_CMP) 910 return; 911 912 cdm.ccb_h.func_code = XPT_DEV_MATCH; 913 cdm.num_patterns = 1; 914 cdm.patterns = &match_pattern; 915 cdm.pattern_buf_len = sizeof(match_pattern); 916 cdm.match_buf_len = sizeof(match_result); 917 cdm.matches = &match_result; 918 919 xpt_action((union ccb *)&cdm); 920 xpt_free_path(cdm.ccb_h.path); 921 922 if ((cdm.ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP 923 || (cdm.status != CAM_DEV_MATCH_LAST 924 && cdm.status != CAM_DEV_MATCH_MORE) 925 || cdm.num_matches == 0) 926 return; 927 928 device_match = &match_result.result.device_result; 929 if (xpt_create_path(&cdm.ccb_h.path, /*periph*/NULL, 930 device_match->path_id, 931 device_match->target_id, 932 device_match->target_lun) != CAM_REQ_CMP) 933 return; 934 935 args->callback(enc, elem, cdm.ccb_h.path, args->callback_arg); 936 937 xpt_free_path(cdm.ccb_h.path); 938 } 939 940 /** 941 * \brief Iterate over and find the matching periph objects for the 942 * specified element. 943 * 944 * \param enc SES instance containing elm 945 * \param elm Element for which to perform periph object matching. 946 * \param callback The callback function to invoke with each matching 947 * periph object. 948 * \param callback_arg Argument passed through to callback on each invocation. 949 */ 950 static void 951 ses_paths_iter(enc_softc_t *enc, enc_element_t *elm, 952 ses_path_callback_t *callback, void *callback_arg) 953 { 954 ses_path_iter_args_t args; 955 956 args.callback = callback; 957 args.callback_arg = callback_arg; 958 ses_devids_iter(enc, elm, ses_path_iter_devid_callback, &args); 959 } 960 961 /** 962 * ses_paths_iter() callback function used by ses_get_elmdevname() 963 * to record periph driver instance strings corresponding to a SES 964 * element. 965 * 966 * \param enc SES instance containing elm 967 * \param elm Element on which periph matching is active. 968 * \param periph A periph instance that matches elm. 969 * \param arg Argument passed through to callback on each invocation. 970 */ 971 static void 972 ses_elmdevname_callback(enc_softc_t *enc, enc_element_t *elem, 973 struct cam_path *path, void *arg) 974 { 975 struct sbuf *sb; 976 977 sb = (struct sbuf *)arg; 978 cam_periph_list(path, sb); 979 } 980 981 /** 982 * Argument package passed through ses_paths_iter() to 983 * ses_getcampath_callback. 984 */ 985 typedef struct ses_setphyspath_callback_args { 986 struct sbuf *physpath; 987 int num_set; 988 } ses_setphyspath_callback_args_t; 989 990 /** 991 * \brief ses_paths_iter() callback to set the physical path on the 992 * CAM EDT entries corresponding to a given SES element. 993 * 994 * \param enc SES instance containing elm 995 * \param elm Element on which periph matching is active. 996 * \param periph A periph instance that matches elm. 997 * \param arg Argument passed through to callback on each invocation. 998 */ 999 static void 1000 ses_setphyspath_callback(enc_softc_t *enc, enc_element_t *elm, 1001 struct cam_path *path, void *arg) 1002 { 1003 struct ccb_dev_advinfo cdai; 1004 ses_setphyspath_callback_args_t *args; 1005 char *old_physpath; 1006 1007 args = (ses_setphyspath_callback_args_t *)arg; 1008 old_physpath = malloc(MAXPATHLEN, M_SCSIENC, M_WAITOK|M_ZERO); 1009 cam_periph_lock(enc->periph); 1010 xpt_setup_ccb(&cdai.ccb_h, path, CAM_PRIORITY_NORMAL); 1011 cdai.ccb_h.func_code = XPT_DEV_ADVINFO; 1012 cdai.buftype = CDAI_TYPE_PHYS_PATH; 1013 cdai.flags = CDAI_FLAG_NONE; 1014 cdai.bufsiz = MAXPATHLEN; 1015 cdai.buf = old_physpath; 1016 xpt_action((union ccb *)&cdai); 1017 if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0) 1018 cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE); 1019 1020 if (strcmp(old_physpath, sbuf_data(args->physpath)) != 0) { 1021 1022 xpt_setup_ccb(&cdai.ccb_h, path, CAM_PRIORITY_NORMAL); 1023 cdai.ccb_h.func_code = XPT_DEV_ADVINFO; 1024 cdai.buftype = CDAI_TYPE_PHYS_PATH; 1025 cdai.flags = CDAI_FLAG_STORE; 1026 cdai.bufsiz = sbuf_len(args->physpath); 1027 cdai.buf = sbuf_data(args->physpath); 1028 xpt_action((union ccb *)&cdai); 1029 if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0) 1030 cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE); 1031 if (cdai.ccb_h.status == CAM_REQ_CMP) 1032 args->num_set++; 1033 } 1034 cam_periph_unlock(enc->periph); 1035 free(old_physpath, M_SCSIENC); 1036 } 1037 1038 /** 1039 * \brief Set a device's physical path string in CAM XPT. 1040 * 1041 * \param enc SES instance containing elm 1042 * \param elm Element to publish physical path string for 1043 * \param iter Iterator whose state corresponds to elm 1044 * 1045 * \return 0 on success, errno otherwise. 1046 */ 1047 static int 1048 ses_set_physpath(enc_softc_t *enc, enc_element_t *elm, 1049 struct ses_iterator *iter) 1050 { 1051 struct ccb_dev_advinfo cdai; 1052 ses_setphyspath_callback_args_t args; 1053 int i, ret; 1054 struct sbuf sb; 1055 struct scsi_vpd_id_descriptor *idd; 1056 uint8_t *devid; 1057 ses_element_t *elmpriv; 1058 const char *c; 1059 1060 ret = EIO; 1061 devid = NULL; 1062 1063 /* 1064 * Assemble the components of the physical path starting with 1065 * the device ID of the enclosure itself. 1066 */ 1067 xpt_setup_ccb(&cdai.ccb_h, enc->periph->path, CAM_PRIORITY_NORMAL); 1068 cdai.ccb_h.func_code = XPT_DEV_ADVINFO; 1069 cdai.buftype = CDAI_TYPE_SCSI_DEVID; 1070 cdai.bufsiz = CAM_SCSI_DEVID_MAXLEN; 1071 cdai.buf = devid = malloc(cdai.bufsiz, M_SCSIENC, M_WAITOK|M_ZERO); 1072 cam_periph_lock(enc->periph); 1073 xpt_action((union ccb *)&cdai); 1074 if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0) 1075 cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE); 1076 cam_periph_unlock(enc->periph); 1077 if (cdai.ccb_h.status != CAM_REQ_CMP) 1078 goto out; 1079 1080 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf, 1081 cdai.provsiz, scsi_devid_is_naa_ieee_reg); 1082 if (idd == NULL) 1083 goto out; 1084 1085 if (sbuf_new(&sb, NULL, 128, SBUF_AUTOEXTEND) == NULL) { 1086 ret = ENOMEM; 1087 goto out; 1088 } 1089 /* Next, generate the physical path string */ 1090 sbuf_printf(&sb, "id1,enc@n%jx/type@%x/slot@%x", 1091 scsi_8btou64(idd->identifier), iter->type_index, 1092 iter->type_element_index); 1093 /* Append the element descriptor if one exists */ 1094 elmpriv = elm->elm_private; 1095 if (elmpriv->descr != NULL && elmpriv->descr_len > 0) { 1096 sbuf_cat(&sb, "/elmdesc@"); 1097 for (i = 0, c = elmpriv->descr; i < elmpriv->descr_len; 1098 i++, c++) { 1099 if (!isprint(*c) || isspace(*c) || *c == '/') 1100 sbuf_putc(&sb, '_'); 1101 else 1102 sbuf_putc(&sb, *c); 1103 } 1104 } 1105 sbuf_finish(&sb); 1106 1107 /* 1108 * Set this physical path on any CAM devices with a device ID 1109 * descriptor that matches one created from the SES additional 1110 * status data for this element. 1111 */ 1112 args.physpath= &sb; 1113 args.num_set = 0; 1114 ses_paths_iter(enc, elm, ses_setphyspath_callback, &args); 1115 sbuf_delete(&sb); 1116 1117 ret = args.num_set == 0 ? ENOENT : 0; 1118 1119 out: 1120 if (devid != NULL) 1121 ENC_FREE(devid); 1122 return (ret); 1123 } 1124 1125 /** 1126 * \brief Helper to set the CDB fields appropriately. 1127 * 1128 * \param cdb Buffer containing the cdb. 1129 * \param pagenum SES diagnostic page to query for. 1130 * \param dir Direction of query. 1131 */ 1132 static void 1133 ses_page_cdb(char *cdb, int bufsiz, SesDiagPageCodes pagenum, int dir) 1134 { 1135 1136 /* Ref: SPC-4 r25 Section 6.20 Table 223 */ 1137 if (dir == CAM_DIR_IN) { 1138 cdb[0] = RECEIVE_DIAGNOSTIC; 1139 cdb[1] = 1; /* Set page code valid bit */ 1140 cdb[2] = pagenum; 1141 } else { 1142 cdb[0] = SEND_DIAGNOSTIC; 1143 cdb[1] = 0x10; 1144 cdb[2] = pagenum; 1145 } 1146 cdb[3] = bufsiz >> 8; /* high bits */ 1147 cdb[4] = bufsiz & 0xff; /* low bits */ 1148 cdb[5] = 0; 1149 } 1150 1151 /** 1152 * \brief Discover whether this instance supports timed completion of a 1153 * RECEIVE DIAGNOSTIC RESULTS command requesting the Enclosure Status 1154 * page, and store the result in the softc, updating if necessary. 1155 * 1156 * \param enc SES instance to query and update. 1157 * \param tc_en Value of timed completion to set (see \return). 1158 * 1159 * \return 1 if timed completion enabled, 0 otherwise. 1160 */ 1161 static int 1162 ses_set_timed_completion(enc_softc_t *enc, uint8_t tc_en) 1163 { 1164 union ccb *ccb; 1165 struct cam_periph *periph; 1166 struct ses_mgmt_mode_page *mgmt; 1167 uint8_t *mode_buf; 1168 size_t mode_buf_len; 1169 ses_softc_t *ses; 1170 1171 periph = enc->periph; 1172 ses = enc->enc_private; 1173 ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL); 1174 1175 mode_buf_len = sizeof(struct ses_mgmt_mode_page); 1176 mode_buf = ENC_MALLOCZ(mode_buf_len); 1177 if (mode_buf == NULL) 1178 goto out; 1179 1180 scsi_mode_sense(&ccb->csio, /*retries*/4, NULL, MSG_SIMPLE_Q_TAG, 1181 /*dbd*/FALSE, SMS_PAGE_CTRL_CURRENT, SES_MGMT_MODE_PAGE_CODE, 1182 mode_buf, mode_buf_len, SSD_FULL_SIZE, /*timeout*/60 * 1000); 1183 1184 /* 1185 * Ignore illegal request errors, as they are quite common and we 1186 * will print something out in that case anyway. 1187 */ 1188 cam_periph_runccb(ccb, enc_error, ENC_CFLAGS, 1189 ENC_FLAGS|SF_QUIET_IR, NULL); 1190 if (ccb->ccb_h.status != CAM_REQ_CMP) { 1191 ENC_VLOG(enc, "Timed Completion Unsupported\n"); 1192 goto release; 1193 } 1194 1195 /* Skip the mode select if the desired value is already set */ 1196 mgmt = (struct ses_mgmt_mode_page *)mode_buf; 1197 if ((mgmt->byte5 & SES_MGMT_TIMED_COMP_EN) == tc_en) 1198 goto done; 1199 1200 /* Value is not what we wanted, set it */ 1201 if (tc_en) 1202 mgmt->byte5 |= SES_MGMT_TIMED_COMP_EN; 1203 else 1204 mgmt->byte5 &= ~SES_MGMT_TIMED_COMP_EN; 1205 /* SES2r20: a completion time of zero means as long as possible */ 1206 bzero(&mgmt->max_comp_time, sizeof(mgmt->max_comp_time)); 1207 1208 scsi_mode_select(&ccb->csio, 5, NULL, MSG_SIMPLE_Q_TAG, 1209 /*page_fmt*/FALSE, /*save_pages*/TRUE, mode_buf, mode_buf_len, 1210 SSD_FULL_SIZE, /*timeout*/60 * 1000); 1211 1212 cam_periph_runccb(ccb, enc_error, ENC_CFLAGS, ENC_FLAGS, NULL); 1213 if (ccb->ccb_h.status != CAM_REQ_CMP) { 1214 ENC_VLOG(enc, "Timed Completion Set Failed\n"); 1215 goto release; 1216 } 1217 1218 done: 1219 if ((mgmt->byte5 & SES_MGMT_TIMED_COMP_EN) != 0) { 1220 ENC_LOG(enc, "Timed Completion Enabled\n"); 1221 ses->ses_flags |= SES_FLAG_TIMEDCOMP; 1222 } else { 1223 ENC_LOG(enc, "Timed Completion Disabled\n"); 1224 ses->ses_flags &= ~SES_FLAG_TIMEDCOMP; 1225 } 1226 release: 1227 ENC_FREE(mode_buf); 1228 xpt_release_ccb(ccb); 1229 out: 1230 return (ses->ses_flags & SES_FLAG_TIMEDCOMP); 1231 } 1232 1233 /** 1234 * \brief Process the list of supported pages and update flags. 1235 * 1236 * \param enc SES device to query. 1237 * \param buf Buffer containing the config page. 1238 * \param xfer_len Length of the config page in the buffer. 1239 * 1240 * \return 0 on success, errno otherwise. 1241 */ 1242 static int 1243 ses_process_pages(enc_softc_t *enc, struct enc_fsm_state *state, 1244 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 1245 { 1246 ses_softc_t *ses; 1247 struct scsi_diag_page *page; 1248 int err, i, length; 1249 1250 CAM_DEBUG(enc->periph->path, CAM_DEBUG_SUBTRACE, 1251 ("entering %s(%p, %d)\n", __func__, bufp, xfer_len)); 1252 ses = enc->enc_private; 1253 err = -1; 1254 1255 if (error != 0) { 1256 err = error; 1257 goto out; 1258 } 1259 if (xfer_len < sizeof(*page)) { 1260 ENC_VLOG(enc, "Unable to parse Diag Pages List Header\n"); 1261 err = EIO; 1262 goto out; 1263 } 1264 page = (struct scsi_diag_page *)*bufp; 1265 length = scsi_2btoul(page->length); 1266 if (length + offsetof(struct scsi_diag_page, params) > xfer_len) { 1267 ENC_VLOG(enc, "Diag Pages List Too Long\n"); 1268 goto out; 1269 } 1270 ENC_DLOG(enc, "%s: page length %d, xfer_len %d\n", 1271 __func__, length, xfer_len); 1272 1273 err = 0; 1274 for (i = 0; i < length; i++) { 1275 if (page->params[i] == SesElementDescriptor) 1276 ses->ses_flags |= SES_FLAG_DESC; 1277 else if (page->params[i] == SesAddlElementStatus) 1278 ses->ses_flags |= SES_FLAG_ADDLSTATUS; 1279 } 1280 1281 out: 1282 ENC_DLOG(enc, "%s: exiting with err %d\n", __func__, err); 1283 return (err); 1284 } 1285 1286 /** 1287 * \brief Process the config page and update associated structures. 1288 * 1289 * \param enc SES device to query. 1290 * \param buf Buffer containing the config page. 1291 * \param xfer_len Length of the config page in the buffer. 1292 * 1293 * \return 0 on success, errno otherwise. 1294 */ 1295 static int 1296 ses_process_config(enc_softc_t *enc, struct enc_fsm_state *state, 1297 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 1298 { 1299 struct ses_iterator iter; 1300 ses_softc_t *ses; 1301 enc_cache_t *enc_cache; 1302 ses_cache_t *ses_cache; 1303 uint8_t *buf; 1304 int length; 1305 int err; 1306 int nelm; 1307 int ntype; 1308 struct ses_cfg_page *cfg_page; 1309 struct ses_enc_desc *buf_subenc; 1310 const struct ses_enc_desc **subencs; 1311 const struct ses_enc_desc **cur_subenc; 1312 const struct ses_enc_desc **last_subenc; 1313 ses_type_t *ses_types; 1314 ses_type_t *sestype; 1315 const struct ses_elm_type_desc *cur_buf_type; 1316 const struct ses_elm_type_desc *last_buf_type; 1317 uint8_t *last_valid_byte; 1318 enc_element_t *element; 1319 const char *type_text; 1320 1321 CAM_DEBUG(enc->periph->path, CAM_DEBUG_SUBTRACE, 1322 ("entering %s(%p, %d)\n", __func__, bufp, xfer_len)); 1323 ses = enc->enc_private; 1324 enc_cache = &enc->enc_daemon_cache; 1325 ses_cache = enc_cache->private; 1326 buf = *bufp; 1327 err = -1; 1328 1329 if (error != 0) { 1330 err = error; 1331 goto out; 1332 } 1333 if (xfer_len < sizeof(cfg_page->hdr)) { 1334 ENC_VLOG(enc, "Unable to parse SES Config Header\n"); 1335 err = EIO; 1336 goto out; 1337 } 1338 1339 cfg_page = (struct ses_cfg_page *)buf; 1340 length = ses_page_length(&cfg_page->hdr); 1341 if (length > xfer_len) { 1342 ENC_VLOG(enc, "Enclosure Config Page Too Long\n"); 1343 goto out; 1344 } 1345 last_valid_byte = &buf[length - 1]; 1346 1347 ENC_DLOG(enc, "%s: total page length %d, xfer_len %d\n", 1348 __func__, length, xfer_len); 1349 1350 err = 0; 1351 if (ses_config_cache_valid(ses_cache, cfg_page->hdr.gen_code)) { 1352 1353 /* Our cache is still valid. Proceed to fetching status. */ 1354 goto out; 1355 } 1356 1357 /* Cache is no longer valid. Free old data to make way for new. */ 1358 ses_cache_free(enc, enc_cache); 1359 ENC_VLOG(enc, "Generation Code 0x%x has %d SubEnclosures\n", 1360 scsi_4btoul(cfg_page->hdr.gen_code), 1361 ses_cfg_page_get_num_subenc(cfg_page)); 1362 1363 /* Take ownership of the buffer. */ 1364 ses_cache->cfg_page = cfg_page; 1365 *bufp = NULL; 1366 1367 /* 1368 * Now waltz through all the subenclosures summing the number of 1369 * types available in each. 1370 */ 1371 subencs = malloc(ses_cfg_page_get_num_subenc(cfg_page) 1372 * sizeof(*subencs), M_SCSIENC, M_WAITOK|M_ZERO); 1373 /* 1374 * Sub-enclosure data is const after construction (i.e. when 1375 * accessed via our cache object. 1376 * 1377 * The cast here is not required in C++ but C99 is not so 1378 * sophisticated (see C99 6.5.16.1(1)). 1379 */ 1380 ses_cache->ses_nsubencs = ses_cfg_page_get_num_subenc(cfg_page); 1381 ses_cache->subencs = subencs; 1382 1383 buf_subenc = cfg_page->subencs; 1384 cur_subenc = subencs; 1385 last_subenc = &subencs[ses_cache->ses_nsubencs - 1]; 1386 ntype = 0; 1387 while (cur_subenc <= last_subenc) { 1388 1389 if (!ses_enc_desc_is_complete(buf_subenc, last_valid_byte)) { 1390 ENC_VLOG(enc, "Enclosure %d Beyond End of " 1391 "Descriptors\n", cur_subenc - subencs); 1392 err = EIO; 1393 goto out; 1394 } 1395 1396 ENC_VLOG(enc, " SubEnclosure ID %d, %d Types With this ID, " 1397 "Descriptor Length %d, offset %d\n", buf_subenc->subenc_id, 1398 buf_subenc->num_types, buf_subenc->length, 1399 &buf_subenc->byte0 - buf); 1400 ENC_VLOG(enc, "WWN: %jx\n", 1401 (uintmax_t)scsi_8btou64(buf_subenc->logical_id)); 1402 1403 ntype += buf_subenc->num_types; 1404 *cur_subenc = buf_subenc; 1405 cur_subenc++; 1406 buf_subenc = ses_enc_desc_next(buf_subenc); 1407 } 1408 1409 /* Process the type headers. */ 1410 ses_types = malloc(ntype * sizeof(*ses_types), 1411 M_SCSIENC, M_WAITOK|M_ZERO); 1412 /* 1413 * Type data is const after construction (i.e. when accessed via 1414 * our cache object. 1415 */ 1416 ses_cache->ses_ntypes = ntype; 1417 ses_cache->ses_types = ses_types; 1418 1419 cur_buf_type = (const struct ses_elm_type_desc *) 1420 (&(*last_subenc)->length + (*last_subenc)->length + 1); 1421 last_buf_type = cur_buf_type + ntype - 1; 1422 type_text = (const uint8_t *)(last_buf_type + 1); 1423 nelm = 0; 1424 sestype = ses_types; 1425 while (cur_buf_type <= last_buf_type) { 1426 if (&cur_buf_type->etype_txt_len > last_valid_byte) { 1427 ENC_VLOG(enc, "Runt Enclosure Type Header %d\n", 1428 sestype - ses_types); 1429 err = EIO; 1430 goto out; 1431 } 1432 sestype->hdr = cur_buf_type; 1433 sestype->text = type_text; 1434 type_text += cur_buf_type->etype_txt_len; 1435 ENC_VLOG(enc, " Type Desc[%d]: Type 0x%x, MaxElt %d, In Subenc " 1436 "%d, Text Length %d: %.*s\n", sestype - ses_types, 1437 sestype->hdr->etype_elm_type, sestype->hdr->etype_maxelt, 1438 sestype->hdr->etype_subenc, sestype->hdr->etype_txt_len, 1439 sestype->hdr->etype_txt_len, sestype->text); 1440 1441 nelm += sestype->hdr->etype_maxelt 1442 + /*overall status element*/1; 1443 sestype++; 1444 cur_buf_type++; 1445 } 1446 1447 /* Create the object map. */ 1448 enc_cache->elm_map = malloc(nelm * sizeof(enc_element_t), 1449 M_SCSIENC, M_WAITOK|M_ZERO); 1450 enc_cache->nelms = nelm; 1451 1452 ses_iter_init(enc, enc_cache, &iter); 1453 while ((element = ses_iter_next(&iter)) != NULL) { 1454 const struct ses_elm_type_desc *thdr; 1455 1456 ENC_DLOG(enc, "%s: checking obj %d(%d,%d)\n", __func__, 1457 iter.global_element_index, iter.type_index, nelm, 1458 iter.type_element_index); 1459 thdr = ses_cache->ses_types[iter.type_index].hdr; 1460 element->subenclosure = thdr->etype_subenc; 1461 element->enctype = thdr->etype_elm_type; 1462 element->overall_status_elem = iter.type_element_index == 0; 1463 element->elm_private = malloc(sizeof(ses_element_t), 1464 M_SCSIENC, M_WAITOK|M_ZERO); 1465 ENC_DLOG(enc, "%s: creating elmpriv %d(%d,%d) subenc %d " 1466 "type 0x%x\n", __func__, iter.global_element_index, 1467 iter.type_index, iter.type_element_index, 1468 thdr->etype_subenc, thdr->etype_elm_type); 1469 } 1470 1471 err = 0; 1472 1473 out: 1474 if (err) 1475 ses_cache_free(enc, enc_cache); 1476 else { 1477 enc_update_request(enc, SES_UPDATE_GETSTATUS); 1478 if (ses->ses_flags & SES_FLAG_DESC) 1479 enc_update_request(enc, SES_UPDATE_GETELMDESCS); 1480 if (ses->ses_flags & SES_FLAG_ADDLSTATUS) 1481 enc_update_request(enc, SES_UPDATE_GETELMADDLSTATUS); 1482 enc_update_request(enc, SES_PUBLISH_CACHE); 1483 } 1484 ENC_DLOG(enc, "%s: exiting with err %d\n", __func__, err); 1485 return (err); 1486 } 1487 1488 /** 1489 * \brief Update the status page and associated structures. 1490 * 1491 * \param enc SES softc to update for. 1492 * \param buf Buffer containing the status page. 1493 * \param bufsz Amount of data in the buffer. 1494 * 1495 * \return 0 on success, errno otherwise. 1496 */ 1497 static int 1498 ses_process_status(enc_softc_t *enc, struct enc_fsm_state *state, 1499 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 1500 { 1501 struct ses_iterator iter; 1502 enc_element_t *element; 1503 ses_softc_t *ses; 1504 enc_cache_t *enc_cache; 1505 ses_cache_t *ses_cache; 1506 uint8_t *buf; 1507 int err = -1; 1508 int length; 1509 struct ses_status_page *page; 1510 union ses_status_element *cur_stat; 1511 union ses_status_element *last_stat; 1512 1513 ses = enc->enc_private; 1514 enc_cache = &enc->enc_daemon_cache; 1515 ses_cache = enc_cache->private; 1516 buf = *bufp; 1517 1518 ENC_DLOG(enc, "%s: enter (%p, %p, %d)\n", __func__, enc, buf, xfer_len); 1519 page = (struct ses_status_page *)buf; 1520 length = ses_page_length(&page->hdr); 1521 1522 if (error != 0) { 1523 err = error; 1524 goto out; 1525 } 1526 /* 1527 * Make sure the length fits in the buffer. 1528 * 1529 * XXX all this means is that the page is larger than the space 1530 * we allocated. Since we use a statically sized buffer, this 1531 * could happen... Need to use dynamic discovery of the size. 1532 */ 1533 if (length > xfer_len) { 1534 ENC_VLOG(enc, "Enclosure Status Page Too Long\n"); 1535 goto out; 1536 } 1537 1538 /* Check for simple enclosure reporting short enclosure status. */ 1539 if (length >= 4 && page->hdr.page_code == SesShortStatus) { 1540 ENC_DLOG(enc, "Got Short Enclosure Status page\n"); 1541 ses->ses_flags &= ~(SES_FLAG_ADDLSTATUS | SES_FLAG_DESC); 1542 ses_cache_free(enc, enc_cache); 1543 enc_cache->enc_status = page->hdr.page_specific_flags; 1544 enc_update_request(enc, SES_PUBLISH_CACHE); 1545 err = 0; 1546 goto out; 1547 } 1548 1549 /* Make sure the length contains at least one header and status */ 1550 if (length < (sizeof(*page) + sizeof(*page->elements))) { 1551 ENC_VLOG(enc, "Enclosure Status Page Too Short\n"); 1552 goto out; 1553 } 1554 1555 if (!ses_config_cache_valid(ses_cache, page->hdr.gen_code)) { 1556 ENC_DLOG(enc, "%s: Generation count change detected\n", 1557 __func__); 1558 enc_update_request(enc, SES_UPDATE_GETCONFIG); 1559 goto out; 1560 } 1561 1562 ses_cache_free_status(enc, enc_cache); 1563 ses_cache->status_page = page; 1564 *bufp = NULL; 1565 1566 enc_cache->enc_status = page->hdr.page_specific_flags; 1567 1568 /* 1569 * Read in individual element status. The element order 1570 * matches the order reported in the config page (i.e. the 1571 * order of an unfiltered iteration of the config objects).. 1572 */ 1573 ses_iter_init(enc, enc_cache, &iter); 1574 cur_stat = page->elements; 1575 last_stat = (union ses_status_element *) 1576 &buf[length - sizeof(*last_stat)]; 1577 ENC_DLOG(enc, "%s: total page length %d, xfer_len %d\n", 1578 __func__, length, xfer_len); 1579 while (cur_stat <= last_stat 1580 && (element = ses_iter_next(&iter)) != NULL) { 1581 1582 ENC_DLOG(enc, "%s: obj %d(%d,%d) off=0x%tx status=%jx\n", 1583 __func__, iter.global_element_index, iter.type_index, 1584 iter.type_element_index, (uint8_t *)cur_stat - buf, 1585 scsi_4btoul(cur_stat->bytes)); 1586 1587 memcpy(&element->encstat, cur_stat, sizeof(element->encstat)); 1588 element->svalid = 1; 1589 cur_stat++; 1590 } 1591 1592 if (ses_iter_next(&iter) != NULL) { 1593 ENC_VLOG(enc, "Status page, length insufficient for " 1594 "expected number of objects\n"); 1595 } else { 1596 if (cur_stat <= last_stat) 1597 ENC_VLOG(enc, "Status page, exhausted objects before " 1598 "exhausing page\n"); 1599 enc_update_request(enc, SES_PUBLISH_CACHE); 1600 err = 0; 1601 } 1602 out: 1603 ENC_DLOG(enc, "%s: exiting with error %d\n", __func__, err); 1604 return (err); 1605 } 1606 1607 typedef enum { 1608 /** 1609 * The enclosure should not provide additional element 1610 * status for this element type in page 0x0A. 1611 * 1612 * \note This status is returned for any types not 1613 * listed SES3r02. Further types added in a 1614 * future specification will be incorrectly 1615 * classified. 1616 */ 1617 TYPE_ADDLSTATUS_NONE, 1618 1619 /** 1620 * The element type provides additional element status 1621 * in page 0x0A. 1622 */ 1623 TYPE_ADDLSTATUS_MANDATORY, 1624 1625 /** 1626 * The element type may provide additional element status 1627 * in page 0x0A, but i 1628 */ 1629 TYPE_ADDLSTATUS_OPTIONAL 1630 } ses_addlstatus_avail_t; 1631 1632 /** 1633 * \brief Check to see whether a given type (as obtained via type headers) is 1634 * supported by the additional status command. 1635 * 1636 * \param enc SES softc to check. 1637 * \param typidx Type index to check for. 1638 * 1639 * \return An enumeration indicating if additional status is mandatory, 1640 * optional, or not required for this type. 1641 */ 1642 static ses_addlstatus_avail_t 1643 ses_typehasaddlstatus(enc_softc_t *enc, uint8_t typidx) 1644 { 1645 enc_cache_t *enc_cache; 1646 ses_cache_t *ses_cache; 1647 1648 enc_cache = &enc->enc_daemon_cache; 1649 ses_cache = enc_cache->private; 1650 switch(ses_cache->ses_types[typidx].hdr->etype_elm_type) { 1651 case ELMTYP_DEVICE: 1652 case ELMTYP_ARRAY_DEV: 1653 case ELMTYP_SAS_EXP: 1654 return (TYPE_ADDLSTATUS_MANDATORY); 1655 case ELMTYP_SCSI_INI: 1656 case ELMTYP_SCSI_TGT: 1657 case ELMTYP_ESCC: 1658 return (TYPE_ADDLSTATUS_OPTIONAL); 1659 default: 1660 /* No additional status information available. */ 1661 break; 1662 } 1663 return (TYPE_ADDLSTATUS_NONE); 1664 } 1665 1666 static int ses_get_elm_addlstatus_fc(enc_softc_t *, enc_cache_t *, 1667 uint8_t *, int); 1668 static int ses_get_elm_addlstatus_sas(enc_softc_t *, enc_cache_t *, uint8_t *, 1669 int, int, int, int); 1670 1671 /** 1672 * \brief Parse the additional status element data for each object. 1673 * 1674 * \param enc The SES softc to update. 1675 * \param buf The buffer containing the additional status 1676 * element response. 1677 * \param xfer_len Size of the buffer. 1678 * 1679 * \return 0 on success, errno otherwise. 1680 */ 1681 static int 1682 ses_process_elm_addlstatus(enc_softc_t *enc, struct enc_fsm_state *state, 1683 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 1684 { 1685 struct ses_iterator iter, titer; 1686 int eip; 1687 int err; 1688 int ignore_index = 0; 1689 int length; 1690 int offset; 1691 enc_cache_t *enc_cache; 1692 ses_cache_t *ses_cache; 1693 uint8_t *buf; 1694 ses_element_t *elmpriv; 1695 const struct ses_page_hdr *hdr; 1696 enc_element_t *element, *telement; 1697 1698 enc_cache = &enc->enc_daemon_cache; 1699 ses_cache = enc_cache->private; 1700 buf = *bufp; 1701 err = -1; 1702 1703 if (error != 0) { 1704 err = error; 1705 goto out; 1706 } 1707 ses_cache_free_elm_addlstatus(enc, enc_cache); 1708 ses_cache->elm_addlstatus_page = 1709 (struct ses_addl_elem_status_page *)buf; 1710 *bufp = NULL; 1711 1712 /* 1713 * The objects appear in the same order here as in Enclosure Status, 1714 * which itself is ordered by the Type Descriptors from the Config 1715 * page. However, it is necessary to skip elements that are not 1716 * supported by this page when counting them. 1717 */ 1718 hdr = &ses_cache->elm_addlstatus_page->hdr; 1719 length = ses_page_length(hdr); 1720 ENC_DLOG(enc, "Additional Element Status Page Length 0x%x\n", length); 1721 /* Make sure the length includes at least one header. */ 1722 if (length < sizeof(*hdr)+sizeof(struct ses_elm_addlstatus_base_hdr)) { 1723 ENC_VLOG(enc, "Runt Additional Element Status Page\n"); 1724 goto out; 1725 } 1726 if (length > xfer_len) { 1727 ENC_VLOG(enc, "Additional Element Status Page Too Long\n"); 1728 goto out; 1729 } 1730 1731 if (!ses_config_cache_valid(ses_cache, hdr->gen_code)) { 1732 ENC_DLOG(enc, "%s: Generation count change detected\n", 1733 __func__); 1734 enc_update_request(enc, SES_UPDATE_GETCONFIG); 1735 goto out; 1736 } 1737 1738 offset = sizeof(struct ses_page_hdr); 1739 ses_iter_init(enc, enc_cache, &iter); 1740 while (offset < length 1741 && (element = ses_iter_next(&iter)) != NULL) { 1742 struct ses_elm_addlstatus_base_hdr *elm_hdr; 1743 int proto_info_len; 1744 ses_addlstatus_avail_t status_type; 1745 1746 /* 1747 * Additional element status is only provided for 1748 * individual elements (i.e. overal status elements 1749 * are excluded) and those of the types specified 1750 * in the SES spec. 1751 */ 1752 status_type = ses_typehasaddlstatus(enc, iter.type_index); 1753 if (iter.individual_element_index == ITERATOR_INDEX_INVALID 1754 || status_type == TYPE_ADDLSTATUS_NONE) 1755 continue; 1756 1757 elm_hdr = (struct ses_elm_addlstatus_base_hdr *)&buf[offset]; 1758 eip = ses_elm_addlstatus_eip(elm_hdr); 1759 if (eip && !ignore_index) { 1760 struct ses_elm_addlstatus_eip_hdr *eip_hdr; 1761 int expected_index, index; 1762 ses_elem_index_type_t index_type; 1763 1764 eip_hdr = (struct ses_elm_addlstatus_eip_hdr *)elm_hdr; 1765 if (eip_hdr->byte2 & SES_ADDL_EIP_EIIOE) { 1766 index_type = SES_ELEM_INDEX_GLOBAL; 1767 expected_index = iter.global_element_index; 1768 } else { 1769 index_type = SES_ELEM_INDEX_INDIVIDUAL; 1770 expected_index = iter.individual_element_index; 1771 } 1772 titer = iter; 1773 telement = ses_iter_seek_to(&titer, 1774 eip_hdr->element_index, index_type); 1775 if (telement != NULL && 1776 (ses_typehasaddlstatus(enc, titer.type_index) != 1777 TYPE_ADDLSTATUS_NONE || 1778 titer.type_index > ELMTYP_SAS_CONN)) { 1779 iter = titer; 1780 element = telement; 1781 } else 1782 ignore_index = 1; 1783 1784 if (eip_hdr->byte2 & SES_ADDL_EIP_EIIOE) 1785 index = iter.global_element_index; 1786 else 1787 index = iter.individual_element_index; 1788 if (index > expected_index 1789 && status_type == TYPE_ADDLSTATUS_MANDATORY) { 1790 ENC_VLOG(enc, "%s: provided %s element" 1791 "index %d skips mandatory status " 1792 " element at index %d\n", 1793 __func__, (eip_hdr->byte2 & 1794 SES_ADDL_EIP_EIIOE) ? "global " : "", 1795 index, expected_index); 1796 } 1797 } 1798 elmpriv = element->elm_private; 1799 elmpriv->addl.hdr = elm_hdr; 1800 ENC_DLOG(enc, "%s: global element index=%d, type index=%d " 1801 "type element index=%d, offset=0x%x, " 1802 "byte0=0x%x, length=0x%x\n", __func__, 1803 iter.global_element_index, iter.type_index, 1804 iter.type_element_index, offset, elmpriv->addl.hdr->byte0, 1805 elmpriv->addl.hdr->length); 1806 1807 /* Skip to after the length field */ 1808 offset += sizeof(struct ses_elm_addlstatus_base_hdr); 1809 1810 /* Make sure the descriptor is within bounds */ 1811 if ((offset + elmpriv->addl.hdr->length) > length) { 1812 ENC_VLOG(enc, "Element %d Beyond End " 1813 "of Additional Element Status Descriptors\n", 1814 iter.global_element_index); 1815 break; 1816 } 1817 1818 /* Advance to the protocol data, skipping eip bytes if needed */ 1819 offset += (eip * SES_EIP_HDR_EXTRA_LEN); 1820 proto_info_len = elmpriv->addl.hdr->length 1821 - (eip * SES_EIP_HDR_EXTRA_LEN); 1822 1823 /* Errors in this block are ignored as they are non-fatal */ 1824 switch(ses_elm_addlstatus_proto(elmpriv->addl.hdr)) { 1825 case SPSP_PROTO_FC: 1826 if (elmpriv->addl.hdr->length == 0) 1827 break; 1828 ses_get_elm_addlstatus_fc(enc, enc_cache, 1829 &buf[offset], proto_info_len); 1830 break; 1831 case SPSP_PROTO_SAS: 1832 if (elmpriv->addl.hdr->length <= 2) 1833 break; 1834 ses_get_elm_addlstatus_sas(enc, enc_cache, 1835 &buf[offset], 1836 proto_info_len, 1837 eip, iter.type_index, 1838 iter.global_element_index); 1839 break; 1840 default: 1841 ENC_VLOG(enc, "Element %d: Unknown Additional Element " 1842 "Protocol 0x%x\n", iter.global_element_index, 1843 ses_elm_addlstatus_proto(elmpriv->addl.hdr)); 1844 break; 1845 } 1846 1847 offset += proto_info_len; 1848 } 1849 err = 0; 1850 out: 1851 if (err) 1852 ses_cache_free_elm_addlstatus(enc, enc_cache); 1853 enc_update_request(enc, SES_PUBLISH_PHYSPATHS); 1854 enc_update_request(enc, SES_PUBLISH_CACHE); 1855 return (err); 1856 } 1857 1858 static int 1859 ses_process_control_request(enc_softc_t *enc, struct enc_fsm_state *state, 1860 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 1861 { 1862 ses_softc_t *ses; 1863 1864 ses = enc->enc_private; 1865 /* 1866 * Possible errors: 1867 * o Generation count wrong. 1868 * o Some SCSI status error. 1869 */ 1870 ses_terminate_control_requests(&ses->ses_pending_requests, error); 1871 enc_update_request(enc, SES_UPDATE_GETSTATUS); 1872 return (0); 1873 } 1874 1875 static int 1876 ses_publish_physpaths(enc_softc_t *enc, struct enc_fsm_state *state, 1877 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 1878 { 1879 struct ses_iterator iter; 1880 enc_cache_t *enc_cache; 1881 enc_element_t *element; 1882 1883 enc_cache = &enc->enc_daemon_cache; 1884 1885 ses_iter_init(enc, enc_cache, &iter); 1886 while ((element = ses_iter_next(&iter)) != NULL) { 1887 /* 1888 * ses_set_physpath() returns success if we changed 1889 * the physpath of any element. This allows us to 1890 * only announce devices once regardless of how 1891 * many times we process additional element status. 1892 */ 1893 if (ses_set_physpath(enc, element, &iter) == 0) 1894 ses_print_addl_data(enc, element); 1895 } 1896 1897 return (0); 1898 } 1899 1900 static int 1901 ses_publish_cache(enc_softc_t *enc, struct enc_fsm_state *state, 1902 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 1903 { 1904 1905 sx_xlock(&enc->enc_cache_lock); 1906 ses_cache_clone(enc, /*src*/&enc->enc_daemon_cache, 1907 /*dst*/&enc->enc_cache); 1908 sx_xunlock(&enc->enc_cache_lock); 1909 1910 return (0); 1911 } 1912 1913 /** 1914 * \brief Parse the descriptors for each object. 1915 * 1916 * \param enc The SES softc to update. 1917 * \param buf The buffer containing the descriptor list response. 1918 * \param xfer_len Size of the buffer. 1919 * 1920 * \return 0 on success, errno otherwise. 1921 */ 1922 static int 1923 ses_process_elm_descs(enc_softc_t *enc, struct enc_fsm_state *state, 1924 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 1925 { 1926 ses_softc_t *ses; 1927 struct ses_iterator iter; 1928 enc_element_t *element; 1929 int err; 1930 int offset; 1931 u_long length, plength; 1932 enc_cache_t *enc_cache; 1933 ses_cache_t *ses_cache; 1934 uint8_t *buf; 1935 ses_element_t *elmpriv; 1936 const struct ses_page_hdr *phdr; 1937 const struct ses_elm_desc_hdr *hdr; 1938 1939 ses = enc->enc_private; 1940 enc_cache = &enc->enc_daemon_cache; 1941 ses_cache = enc_cache->private; 1942 buf = *bufp; 1943 err = -1; 1944 1945 if (error != 0) { 1946 err = error; 1947 goto out; 1948 } 1949 ses_cache_free_elm_descs(enc, enc_cache); 1950 ses_cache->elm_descs_page = (struct ses_elem_descr_page *)buf; 1951 *bufp = NULL; 1952 1953 phdr = &ses_cache->elm_descs_page->hdr; 1954 plength = ses_page_length(phdr); 1955 if (xfer_len < sizeof(struct ses_page_hdr)) { 1956 ENC_VLOG(enc, "Runt Element Descriptor Page\n"); 1957 goto out; 1958 } 1959 if (plength > xfer_len) { 1960 ENC_VLOG(enc, "Element Descriptor Page Too Long\n"); 1961 goto out; 1962 } 1963 1964 if (!ses_config_cache_valid(ses_cache, phdr->gen_code)) { 1965 ENC_VLOG(enc, "%s: Generation count change detected\n", 1966 __func__); 1967 enc_update_request(enc, SES_UPDATE_GETCONFIG); 1968 goto out; 1969 } 1970 1971 offset = sizeof(struct ses_page_hdr); 1972 1973 ses_iter_init(enc, enc_cache, &iter); 1974 while (offset < plength 1975 && (element = ses_iter_next(&iter)) != NULL) { 1976 1977 if ((offset + sizeof(struct ses_elm_desc_hdr)) > plength) { 1978 ENC_VLOG(enc, "Element %d Descriptor Header Past " 1979 "End of Buffer\n", iter.global_element_index); 1980 goto out; 1981 } 1982 hdr = (struct ses_elm_desc_hdr *)&buf[offset]; 1983 length = scsi_2btoul(hdr->length); 1984 ENC_DLOG(enc, "%s: obj %d(%d,%d) length=%d off=%d\n", __func__, 1985 iter.global_element_index, iter.type_index, 1986 iter.type_element_index, length, offset); 1987 if ((offset + sizeof(*hdr) + length) > plength) { 1988 ENC_VLOG(enc, "Element%d Descriptor Past " 1989 "End of Buffer\n", iter.global_element_index); 1990 goto out; 1991 } 1992 offset += sizeof(*hdr); 1993 1994 if (length > 0) { 1995 elmpriv = element->elm_private; 1996 elmpriv->descr_len = length; 1997 elmpriv->descr = &buf[offset]; 1998 } 1999 2000 /* skip over the descriptor itself */ 2001 offset += length; 2002 } 2003 2004 err = 0; 2005 out: 2006 if (err == 0) { 2007 if (ses->ses_flags & SES_FLAG_ADDLSTATUS) 2008 enc_update_request(enc, SES_UPDATE_GETELMADDLSTATUS); 2009 } 2010 enc_update_request(enc, SES_PUBLISH_CACHE); 2011 return (err); 2012 } 2013 2014 static int 2015 ses_fill_rcv_diag_io(enc_softc_t *enc, struct enc_fsm_state *state, 2016 union ccb *ccb, uint8_t *buf) 2017 { 2018 2019 if (enc->enc_type == ENC_SEMB_SES) { 2020 semb_receive_diagnostic_results(&ccb->ataio, /*retries*/5, 2021 NULL, MSG_SIMPLE_Q_TAG, /*pcv*/1, 2022 state->page_code, buf, state->buf_size, 2023 state->timeout); 2024 } else { 2025 scsi_receive_diagnostic_results(&ccb->csio, /*retries*/5, 2026 NULL, MSG_SIMPLE_Q_TAG, /*pcv*/1, 2027 state->page_code, buf, state->buf_size, 2028 SSD_FULL_SIZE, state->timeout); 2029 } 2030 return (0); 2031 } 2032 2033 /** 2034 * \brief Encode the object status into the response buffer, which is 2035 * expected to contain the current enclosure status. This function 2036 * turns off all the 'select' bits for the objects except for the 2037 * object specified, then sends it back to the enclosure. 2038 * 2039 * \param enc SES enclosure the change is being applied to. 2040 * \param buf Buffer containing the current enclosure status response. 2041 * \param amt Length of the response in the buffer. 2042 * \param req The control request to be applied to buf. 2043 * 2044 * \return 0 on success, errno otherwise. 2045 */ 2046 static int 2047 ses_encode(enc_softc_t *enc, uint8_t *buf, int amt, ses_control_request_t *req) 2048 { 2049 struct ses_iterator iter; 2050 enc_element_t *element; 2051 int offset; 2052 struct ses_control_page_hdr *hdr; 2053 2054 ses_iter_init(enc, &enc->enc_cache, &iter); 2055 hdr = (struct ses_control_page_hdr *)buf; 2056 if (req->elm_idx == -1) { 2057 /* for enclosure status, at least 2 bytes are needed */ 2058 if (amt < 2) 2059 return EIO; 2060 hdr->control_flags = 2061 req->elm_stat.comstatus & SES_SET_STATUS_MASK; 2062 ENC_DLOG(enc, "Set EncStat %x\n", hdr->control_flags); 2063 return (0); 2064 } 2065 2066 element = ses_iter_seek_to(&iter, req->elm_idx, SES_ELEM_INDEX_GLOBAL); 2067 if (element == NULL) 2068 return (ENXIO); 2069 2070 /* 2071 * Seek to the type set that corresponds to the requested object. 2072 * The +1 is for the overall status element for the type. 2073 */ 2074 offset = sizeof(struct ses_control_page_hdr) 2075 + (iter.global_element_index * sizeof(struct ses_comstat)); 2076 2077 /* Check for buffer overflow. */ 2078 if (offset + sizeof(struct ses_comstat) > amt) 2079 return (EIO); 2080 2081 /* Set the status. */ 2082 memcpy(&buf[offset], &req->elm_stat, sizeof(struct ses_comstat)); 2083 2084 ENC_DLOG(enc, "Set Type 0x%x Obj 0x%x (offset %d) with %x %x %x %x\n", 2085 iter.type_index, iter.global_element_index, offset, 2086 req->elm_stat.comstatus, req->elm_stat.comstat[0], 2087 req->elm_stat.comstat[1], req->elm_stat.comstat[2]); 2088 2089 return (0); 2090 } 2091 2092 static int 2093 ses_fill_control_request(enc_softc_t *enc, struct enc_fsm_state *state, 2094 union ccb *ccb, uint8_t *buf) 2095 { 2096 ses_softc_t *ses; 2097 enc_cache_t *enc_cache; 2098 ses_cache_t *ses_cache; 2099 struct ses_control_page_hdr *hdr; 2100 ses_control_request_t *req; 2101 size_t plength; 2102 size_t offset; 2103 2104 ses = enc->enc_private; 2105 enc_cache = &enc->enc_daemon_cache; 2106 ses_cache = enc_cache->private; 2107 hdr = (struct ses_control_page_hdr *)buf; 2108 2109 if (ses_cache->status_page == NULL) { 2110 ses_terminate_control_requests(&ses->ses_requests, EIO); 2111 return (EIO); 2112 } 2113 2114 plength = ses_page_length(&ses_cache->status_page->hdr); 2115 memcpy(buf, ses_cache->status_page, plength); 2116 2117 /* Disable the select bits in all status entries. */ 2118 offset = sizeof(struct ses_control_page_hdr); 2119 for (offset = sizeof(struct ses_control_page_hdr); 2120 offset < plength; offset += sizeof(struct ses_comstat)) { 2121 buf[offset] &= ~SESCTL_CSEL; 2122 } 2123 2124 /* And make sure the INVOP bit is clear. */ 2125 hdr->control_flags &= ~SES_ENCSTAT_INVOP; 2126 2127 /* Apply incoming requests. */ 2128 while ((req = TAILQ_FIRST(&ses->ses_requests)) != NULL) { 2129 2130 TAILQ_REMOVE(&ses->ses_requests, req, links); 2131 req->result = ses_encode(enc, buf, plength, req); 2132 if (req->result != 0) { 2133 wakeup(req); 2134 continue; 2135 } 2136 TAILQ_INSERT_TAIL(&ses->ses_pending_requests, req, links); 2137 } 2138 2139 if (TAILQ_EMPTY(&ses->ses_pending_requests) != 0) 2140 return (ENOENT); 2141 2142 /* Fill out the ccb */ 2143 if (enc->enc_type == ENC_SEMB_SES) { 2144 semb_send_diagnostic(&ccb->ataio, /*retries*/5, NULL, 2145 MSG_SIMPLE_Q_TAG, 2146 buf, ses_page_length(&ses_cache->status_page->hdr), 2147 state->timeout); 2148 } else { 2149 scsi_send_diagnostic(&ccb->csio, /*retries*/5, NULL, 2150 MSG_SIMPLE_Q_TAG, /*unit_offline*/0, 2151 /*device_offline*/0, /*self_test*/0, 2152 /*page_format*/1, /*self_test_code*/0, 2153 buf, ses_page_length(&ses_cache->status_page->hdr), 2154 SSD_FULL_SIZE, state->timeout); 2155 } 2156 return (0); 2157 } 2158 2159 static int 2160 ses_get_elm_addlstatus_fc(enc_softc_t *enc, enc_cache_t *enc_cache, 2161 uint8_t *buf, int bufsiz) 2162 { 2163 ENC_VLOG(enc, "FC Device Support Stubbed in Additional Status Page\n"); 2164 return (ENODEV); 2165 } 2166 2167 #define SES_PRINT_PORTS(p, type) do { \ 2168 sbuf_printf(sbp, " %s(", type); \ 2169 if (((p) & SES_SASOBJ_DEV_PHY_PROTOMASK) == 0) \ 2170 sbuf_printf(sbp, " None"); \ 2171 else { \ 2172 if ((p) & SES_SASOBJ_DEV_PHY_SMP) \ 2173 sbuf_printf(sbp, " SMP"); \ 2174 if ((p) & SES_SASOBJ_DEV_PHY_STP) \ 2175 sbuf_printf(sbp, " STP"); \ 2176 if ((p) & SES_SASOBJ_DEV_PHY_SSP) \ 2177 sbuf_printf(sbp, " SSP"); \ 2178 } \ 2179 sbuf_printf(sbp, " )"); \ 2180 } while(0) 2181 2182 /** 2183 * \brief Print the additional element status data for this object, for SAS 2184 * type 0 objects. See SES2 r20 Section 6.1.13.3.2. 2185 * 2186 * \param sesname SES device name associated with the object. 2187 * \param sbp Sbuf to print to. 2188 * \param obj The object to print the data for. 2189 * \param periph_name Peripheral string associated with the object. 2190 */ 2191 static void 2192 ses_print_addl_data_sas_type0(char *sesname, struct sbuf *sbp, 2193 enc_element_t *obj, char *periph_name) 2194 { 2195 int i; 2196 ses_element_t *elmpriv; 2197 struct ses_addl_status *addl; 2198 struct ses_elm_sas_device_phy *phy; 2199 2200 elmpriv = obj->elm_private; 2201 addl = &(elmpriv->addl); 2202 if (addl->proto_hdr.sas == NULL) 2203 return; 2204 sbuf_printf(sbp, "%s: %s: SAS Device Slot Element:", 2205 sesname, periph_name); 2206 sbuf_printf(sbp, " %d Phys", addl->proto_hdr.sas->base_hdr.num_phys); 2207 if (ses_elm_addlstatus_eip(addl->hdr)) 2208 sbuf_printf(sbp, " at Slot %d", 2209 addl->proto_hdr.sas->type0_eip.dev_slot_num); 2210 if (ses_elm_sas_type0_not_all_phys(addl->proto_hdr.sas)) 2211 sbuf_printf(sbp, ", Not All Phys"); 2212 sbuf_printf(sbp, "\n"); 2213 if (addl->proto_data.sasdev_phys == NULL) 2214 return; 2215 for (i = 0;i < addl->proto_hdr.sas->base_hdr.num_phys;i++) { 2216 phy = &addl->proto_data.sasdev_phys[i]; 2217 sbuf_printf(sbp, "%s: phy %d:", sesname, i); 2218 if (ses_elm_sas_dev_phy_sata_dev(phy)) 2219 /* Spec says all other fields are specific values */ 2220 sbuf_printf(sbp, " SATA device\n"); 2221 else { 2222 sbuf_printf(sbp, " SAS device type %d id %d\n", 2223 ses_elm_sas_dev_phy_dev_type(phy), phy->phy_id); 2224 sbuf_printf(sbp, "%s: phy %d: protocols:", sesname, i); 2225 SES_PRINT_PORTS(phy->initiator_ports, "Initiator"); 2226 SES_PRINT_PORTS(phy->target_ports, "Target"); 2227 sbuf_printf(sbp, "\n"); 2228 } 2229 sbuf_printf(sbp, "%s: phy %d: parent %jx addr %jx\n", 2230 sesname, i, 2231 (uintmax_t)scsi_8btou64(phy->parent_addr), 2232 (uintmax_t)scsi_8btou64(phy->phy_addr)); 2233 } 2234 } 2235 #undef SES_PRINT_PORTS 2236 2237 /** 2238 * \brief Report whether a given enclosure object is an expander. 2239 * 2240 * \param enc SES softc associated with object. 2241 * \param obj Enclosure object to report for. 2242 * 2243 * \return 1 if true, 0 otherwise. 2244 */ 2245 static int 2246 ses_obj_is_expander(enc_softc_t *enc, enc_element_t *obj) 2247 { 2248 return (obj->enctype == ELMTYP_SAS_EXP); 2249 } 2250 2251 /** 2252 * \brief Print the additional element status data for this object, for SAS 2253 * type 1 objects. See SES2 r20 Sections 6.1.13.3.3 and 6.1.13.3.4. 2254 * 2255 * \param enc SES enclosure, needed for type identification. 2256 * \param sesname SES device name associated with the object. 2257 * \param sbp Sbuf to print to. 2258 * \param obj The object to print the data for. 2259 * \param periph_name Peripheral string associated with the object. 2260 */ 2261 static void 2262 ses_print_addl_data_sas_type1(enc_softc_t *enc, char *sesname, 2263 struct sbuf *sbp, enc_element_t *obj, char *periph_name) 2264 { 2265 int i, num_phys; 2266 ses_element_t *elmpriv; 2267 struct ses_addl_status *addl; 2268 struct ses_elm_sas_expander_phy *exp_phy; 2269 struct ses_elm_sas_port_phy *port_phy; 2270 2271 elmpriv = obj->elm_private; 2272 addl = &(elmpriv->addl); 2273 if (addl->proto_hdr.sas == NULL) 2274 return; 2275 sbuf_printf(sbp, "%s: %s: SAS ", sesname, periph_name); 2276 if (ses_obj_is_expander(enc, obj)) { 2277 num_phys = addl->proto_hdr.sas->base_hdr.num_phys; 2278 sbuf_printf(sbp, "Expander: %d Phys", num_phys); 2279 if (addl->proto_data.sasexp_phys == NULL) 2280 return; 2281 for (i = 0;i < num_phys;i++) { 2282 exp_phy = &addl->proto_data.sasexp_phys[i]; 2283 sbuf_printf(sbp, "%s: phy %d: connector %d other %d\n", 2284 sesname, i, exp_phy->connector_index, 2285 exp_phy->other_index); 2286 } 2287 } else { 2288 num_phys = addl->proto_hdr.sas->base_hdr.num_phys; 2289 sbuf_printf(sbp, "Port: %d Phys", num_phys); 2290 if (addl->proto_data.sasport_phys == NULL) 2291 return; 2292 for (i = 0;i < num_phys;i++) { 2293 port_phy = &addl->proto_data.sasport_phys[i]; 2294 sbuf_printf(sbp, 2295 "%s: phy %d: id %d connector %d other %d\n", 2296 sesname, i, port_phy->phy_id, 2297 port_phy->connector_index, port_phy->other_index); 2298 sbuf_printf(sbp, "%s: phy %d: addr %jx\n", sesname, i, 2299 (uintmax_t)scsi_8btou64(port_phy->phy_addr)); 2300 } 2301 } 2302 } 2303 2304 /** 2305 * \brief Print the additional element status data for this object. 2306 * 2307 * \param enc SES softc associated with the object. 2308 * \param obj The object to print the data for. 2309 */ 2310 static void 2311 ses_print_addl_data(enc_softc_t *enc, enc_element_t *obj) 2312 { 2313 ses_element_t *elmpriv; 2314 struct ses_addl_status *addl; 2315 struct sbuf sesname, name, out; 2316 2317 elmpriv = obj->elm_private; 2318 if (elmpriv == NULL) 2319 return; 2320 2321 addl = &(elmpriv->addl); 2322 if (addl->hdr == NULL) 2323 return; 2324 2325 sbuf_new(&sesname, NULL, 16, SBUF_AUTOEXTEND); 2326 sbuf_new(&name, NULL, 16, SBUF_AUTOEXTEND); 2327 sbuf_new(&out, NULL, 512, SBUF_AUTOEXTEND); 2328 ses_paths_iter(enc, obj, ses_elmdevname_callback, &name); 2329 if (sbuf_len(&name) == 0) 2330 sbuf_printf(&name, "(none)"); 2331 sbuf_finish(&name); 2332 sbuf_printf(&sesname, "%s%d", enc->periph->periph_name, 2333 enc->periph->unit_number); 2334 sbuf_finish(&sesname); 2335 if (elmpriv->descr != NULL) 2336 sbuf_printf(&out, "%s: %s: Element descriptor: '%s'\n", 2337 sbuf_data(&sesname), sbuf_data(&name), elmpriv->descr); 2338 switch(ses_elm_addlstatus_proto(addl->hdr)) { 2339 case SPSP_PROTO_SAS: 2340 switch(ses_elm_sas_descr_type(addl->proto_hdr.sas)) { 2341 case SES_SASOBJ_TYPE_SLOT: 2342 ses_print_addl_data_sas_type0(sbuf_data(&sesname), 2343 &out, obj, sbuf_data(&name)); 2344 break; 2345 case SES_SASOBJ_TYPE_OTHER: 2346 ses_print_addl_data_sas_type1(enc, sbuf_data(&sesname), 2347 &out, obj, sbuf_data(&name)); 2348 break; 2349 default: 2350 break; 2351 } 2352 break; 2353 case SPSP_PROTO_FC: /* stubbed for now */ 2354 break; 2355 default: 2356 break; 2357 } 2358 sbuf_finish(&out); 2359 printf("%s", sbuf_data(&out)); 2360 sbuf_delete(&out); 2361 sbuf_delete(&name); 2362 sbuf_delete(&sesname); 2363 } 2364 2365 /** 2366 * \brief Update the softc with the additional element status data for this 2367 * object, for SAS type 0 objects. 2368 * 2369 * \param enc SES softc to be updated. 2370 * \param buf The additional element status response buffer. 2371 * \param bufsiz Size of the response buffer. 2372 * \param eip The EIP bit value. 2373 * \param nobj Number of objects attached to the SES softc. 2374 * 2375 * \return 0 on success, errno otherwise. 2376 */ 2377 static int 2378 ses_get_elm_addlstatus_sas_type0(enc_softc_t *enc, enc_cache_t *enc_cache, 2379 uint8_t *buf, int bufsiz, int eip, int nobj) 2380 { 2381 int err, offset, physz; 2382 enc_element_t *obj; 2383 ses_element_t *elmpriv; 2384 struct ses_addl_status *addl; 2385 2386 err = offset = 0; 2387 2388 /* basic object setup */ 2389 obj = &(enc_cache->elm_map[nobj]); 2390 elmpriv = obj->elm_private; 2391 addl = &(elmpriv->addl); 2392 2393 addl->proto_hdr.sas = (union ses_elm_sas_hdr *)&buf[offset]; 2394 2395 /* Don't assume this object has any phys */ 2396 bzero(&addl->proto_data, sizeof(addl->proto_data)); 2397 if (addl->proto_hdr.sas->base_hdr.num_phys == 0) 2398 goto out; 2399 2400 /* Skip forward to the phy list */ 2401 if (eip) 2402 offset += sizeof(struct ses_elm_sas_type0_eip_hdr); 2403 else 2404 offset += sizeof(struct ses_elm_sas_type0_base_hdr); 2405 2406 /* Make sure the phy list fits in the buffer */ 2407 physz = addl->proto_hdr.sas->base_hdr.num_phys; 2408 physz *= sizeof(struct ses_elm_sas_device_phy); 2409 if (physz > (bufsiz - offset + 4)) { 2410 ENC_VLOG(enc, "Element %d Device Phy List Beyond End Of Buffer\n", 2411 nobj); 2412 err = EIO; 2413 goto out; 2414 } 2415 2416 /* Point to the phy list */ 2417 addl->proto_data.sasdev_phys = 2418 (struct ses_elm_sas_device_phy *)&buf[offset]; 2419 2420 out: 2421 return (err); 2422 } 2423 2424 /** 2425 * \brief Update the softc with the additional element status data for this 2426 * object, for SAS type 1 objects. 2427 * 2428 * \param enc SES softc to be updated. 2429 * \param buf The additional element status response buffer. 2430 * \param bufsiz Size of the response buffer. 2431 * \param eip The EIP bit value. 2432 * \param nobj Number of objects attached to the SES softc. 2433 * 2434 * \return 0 on success, errno otherwise. 2435 */ 2436 static int 2437 ses_get_elm_addlstatus_sas_type1(enc_softc_t *enc, enc_cache_t *enc_cache, 2438 uint8_t *buf, int bufsiz, int eip, int nobj) 2439 { 2440 int err, offset, physz; 2441 enc_element_t *obj; 2442 ses_element_t *elmpriv; 2443 struct ses_addl_status *addl; 2444 2445 err = offset = 0; 2446 2447 /* basic object setup */ 2448 obj = &(enc_cache->elm_map[nobj]); 2449 elmpriv = obj->elm_private; 2450 addl = &(elmpriv->addl); 2451 2452 addl->proto_hdr.sas = (union ses_elm_sas_hdr *)&buf[offset]; 2453 2454 /* Don't assume this object has any phys */ 2455 bzero(&addl->proto_data, sizeof(addl->proto_data)); 2456 if (addl->proto_hdr.sas->base_hdr.num_phys == 0) 2457 goto out; 2458 2459 /* Process expanders differently from other type1 cases */ 2460 if (ses_obj_is_expander(enc, obj)) { 2461 offset += sizeof(struct ses_elm_sas_type1_expander_hdr); 2462 physz = addl->proto_hdr.sas->base_hdr.num_phys * 2463 sizeof(struct ses_elm_sas_expander_phy); 2464 if (physz > (bufsiz - offset)) { 2465 ENC_VLOG(enc, "Element %d: Expander Phy List Beyond " 2466 "End Of Buffer\n", nobj); 2467 err = EIO; 2468 goto out; 2469 } 2470 addl->proto_data.sasexp_phys = 2471 (struct ses_elm_sas_expander_phy *)&buf[offset]; 2472 } else { 2473 offset += sizeof(struct ses_elm_sas_type1_nonexpander_hdr); 2474 physz = addl->proto_hdr.sas->base_hdr.num_phys * 2475 sizeof(struct ses_elm_sas_port_phy); 2476 if (physz > (bufsiz - offset + 4)) { 2477 ENC_VLOG(enc, "Element %d: Port Phy List Beyond End " 2478 "Of Buffer\n", nobj); 2479 err = EIO; 2480 goto out; 2481 } 2482 addl->proto_data.sasport_phys = 2483 (struct ses_elm_sas_port_phy *)&buf[offset]; 2484 } 2485 2486 out: 2487 return (err); 2488 } 2489 2490 /** 2491 * \brief Update the softc with the additional element status data for this 2492 * object, for SAS objects. 2493 * 2494 * \param enc SES softc to be updated. 2495 * \param buf The additional element status response buffer. 2496 * \param bufsiz Size of the response buffer. 2497 * \param eip The EIP bit value. 2498 * \param tidx Type index for this object. 2499 * \param nobj Number of objects attached to the SES softc. 2500 * 2501 * \return 0 on success, errno otherwise. 2502 */ 2503 static int 2504 ses_get_elm_addlstatus_sas(enc_softc_t *enc, enc_cache_t *enc_cache, 2505 uint8_t *buf, int bufsiz, int eip, int tidx, 2506 int nobj) 2507 { 2508 int dtype, err; 2509 ses_cache_t *ses_cache; 2510 union ses_elm_sas_hdr *hdr; 2511 2512 /* Need to be able to read the descriptor type! */ 2513 if (bufsiz < sizeof(union ses_elm_sas_hdr)) { 2514 err = EIO; 2515 goto out; 2516 } 2517 2518 ses_cache = enc_cache->private; 2519 2520 hdr = (union ses_elm_sas_hdr *)buf; 2521 dtype = ses_elm_sas_descr_type(hdr); 2522 switch(dtype) { 2523 case SES_SASOBJ_TYPE_SLOT: 2524 switch(ses_cache->ses_types[tidx].hdr->etype_elm_type) { 2525 case ELMTYP_DEVICE: 2526 case ELMTYP_ARRAY_DEV: 2527 break; 2528 default: 2529 ENC_VLOG(enc, "Element %d has Additional Status type 0, " 2530 "invalid for SES element type 0x%x\n", nobj, 2531 ses_cache->ses_types[tidx].hdr->etype_elm_type); 2532 err = ENODEV; 2533 goto out; 2534 } 2535 err = ses_get_elm_addlstatus_sas_type0(enc, enc_cache, 2536 buf, bufsiz, eip, 2537 nobj); 2538 break; 2539 case SES_SASOBJ_TYPE_OTHER: 2540 switch(ses_cache->ses_types[tidx].hdr->etype_elm_type) { 2541 case ELMTYP_SAS_EXP: 2542 case ELMTYP_SCSI_INI: 2543 case ELMTYP_SCSI_TGT: 2544 case ELMTYP_ESCC: 2545 break; 2546 default: 2547 ENC_VLOG(enc, "Element %d has Additional Status type 1, " 2548 "invalid for SES element type 0x%x\n", nobj, 2549 ses_cache->ses_types[tidx].hdr->etype_elm_type); 2550 err = ENODEV; 2551 goto out; 2552 } 2553 err = ses_get_elm_addlstatus_sas_type1(enc, enc_cache, buf, 2554 bufsiz, eip, nobj); 2555 break; 2556 default: 2557 ENC_VLOG(enc, "Element %d of type 0x%x has Additional Status " 2558 "of unknown type 0x%x\n", nobj, 2559 ses_cache->ses_types[tidx].hdr->etype_elm_type, dtype); 2560 err = ENODEV; 2561 break; 2562 } 2563 2564 out: 2565 return (err); 2566 } 2567 2568 static void 2569 ses_softc_invalidate(enc_softc_t *enc) 2570 { 2571 ses_softc_t *ses; 2572 2573 ses = enc->enc_private; 2574 ses_terminate_control_requests(&ses->ses_requests, ENXIO); 2575 } 2576 2577 static void 2578 ses_softc_cleanup(enc_softc_t *enc) 2579 { 2580 2581 ses_cache_free(enc, &enc->enc_cache); 2582 ses_cache_free(enc, &enc->enc_daemon_cache); 2583 ENC_FREE_AND_NULL(enc->enc_private); 2584 ENC_FREE_AND_NULL(enc->enc_cache.private); 2585 ENC_FREE_AND_NULL(enc->enc_daemon_cache.private); 2586 } 2587 2588 static int 2589 ses_init_enc(enc_softc_t *enc) 2590 { 2591 return (0); 2592 } 2593 2594 static int 2595 ses_get_enc_status(enc_softc_t *enc, int slpflag) 2596 { 2597 /* Automatically updated, caller checks enc_cache->encstat itself */ 2598 return (0); 2599 } 2600 2601 static int 2602 ses_set_enc_status(enc_softc_t *enc, uint8_t encstat, int slpflag) 2603 { 2604 ses_control_request_t req; 2605 ses_softc_t *ses; 2606 2607 ses = enc->enc_private; 2608 req.elm_idx = SES_SETSTATUS_ENC_IDX; 2609 req.elm_stat.comstatus = encstat & 0xf; 2610 2611 TAILQ_INSERT_TAIL(&ses->ses_requests, &req, links); 2612 enc_update_request(enc, SES_PROCESS_CONTROL_REQS); 2613 cam_periph_sleep(enc->periph, &req, PUSER, "encstat", 0); 2614 2615 return (req.result); 2616 } 2617 2618 static int 2619 ses_get_elm_status(enc_softc_t *enc, encioc_elm_status_t *elms, int slpflag) 2620 { 2621 unsigned int i = elms->elm_idx; 2622 2623 memcpy(elms->cstat, &enc->enc_cache.elm_map[i].encstat, 4); 2624 return (0); 2625 } 2626 2627 static int 2628 ses_set_elm_status(enc_softc_t *enc, encioc_elm_status_t *elms, int slpflag) 2629 { 2630 ses_control_request_t req; 2631 ses_softc_t *ses; 2632 2633 /* If this is clear, we don't do diddly. */ 2634 if ((elms->cstat[0] & SESCTL_CSEL) == 0) 2635 return (0); 2636 2637 ses = enc->enc_private; 2638 req.elm_idx = elms->elm_idx; 2639 memcpy(&req.elm_stat, elms->cstat, sizeof(req.elm_stat)); 2640 2641 TAILQ_INSERT_TAIL(&ses->ses_requests, &req, links); 2642 enc_update_request(enc, SES_PROCESS_CONTROL_REQS); 2643 cam_periph_sleep(enc->periph, &req, PUSER, "encstat", 0); 2644 2645 return (req.result); 2646 } 2647 2648 static int 2649 ses_get_elm_desc(enc_softc_t *enc, encioc_elm_desc_t *elmd) 2650 { 2651 int i = (int)elmd->elm_idx; 2652 ses_element_t *elmpriv; 2653 2654 /* Assume caller has already checked obj_id validity */ 2655 elmpriv = enc->enc_cache.elm_map[i].elm_private; 2656 /* object might not have a descriptor */ 2657 if (elmpriv == NULL || elmpriv->descr == NULL) { 2658 elmd->elm_desc_len = 0; 2659 return (0); 2660 } 2661 if (elmd->elm_desc_len > elmpriv->descr_len) 2662 elmd->elm_desc_len = elmpriv->descr_len; 2663 copyout(elmpriv->descr, elmd->elm_desc_str, elmd->elm_desc_len); 2664 return (0); 2665 } 2666 2667 /** 2668 * \brief Respond to ENCIOC_GETELMDEVNAME, providing a device name for the 2669 * given object id if one is available. 2670 * 2671 * \param enc SES softc to examine. 2672 * \param objdn ioctl structure to read/write device name info. 2673 * 2674 * \return 0 on success, errno otherwise. 2675 */ 2676 static int 2677 ses_get_elm_devnames(enc_softc_t *enc, encioc_elm_devnames_t *elmdn) 2678 { 2679 struct sbuf sb; 2680 int len; 2681 2682 len = elmdn->elm_names_size; 2683 if (len < 0) 2684 return (EINVAL); 2685 2686 cam_periph_unlock(enc->periph); 2687 sbuf_new(&sb, NULL, len, SBUF_FIXEDLEN); 2688 ses_paths_iter(enc, &enc->enc_cache.elm_map[elmdn->elm_idx], 2689 ses_elmdevname_callback, &sb); 2690 sbuf_finish(&sb); 2691 elmdn->elm_names_len = sbuf_len(&sb); 2692 copyout(sbuf_data(&sb), elmdn->elm_devnames, elmdn->elm_names_len + 1); 2693 cam_periph_lock(enc->periph); 2694 return (elmdn->elm_names_len > 0 ? 0 : ENODEV); 2695 } 2696 2697 /** 2698 * \brief Send a string to the primary subenclosure using the String Out 2699 * SES diagnostic page. 2700 * 2701 * \param enc SES enclosure to run the command on. 2702 * \param sstr SES string structure to operate on 2703 * \param ioc Ioctl being performed 2704 * 2705 * \return 0 on success, errno otherwise. 2706 */ 2707 static int 2708 ses_handle_string(enc_softc_t *enc, encioc_string_t *sstr, int ioc) 2709 { 2710 ses_softc_t *ses; 2711 enc_cache_t *enc_cache; 2712 ses_cache_t *ses_cache; 2713 const struct ses_enc_desc *enc_desc; 2714 int amt, payload, ret; 2715 char cdb[6]; 2716 char str[32]; 2717 char vendor[9]; 2718 char product[17]; 2719 char rev[5]; 2720 uint8_t *buf; 2721 size_t size, rsize; 2722 2723 ses = enc->enc_private; 2724 enc_cache = &enc->enc_daemon_cache; 2725 ses_cache = enc_cache->private; 2726 2727 /* Implement SES2r20 6.1.6 */ 2728 if (sstr->bufsiz > 0xffff) 2729 return (EINVAL); /* buffer size too large */ 2730 2731 if (ioc == ENCIOC_SETSTRING) { 2732 payload = sstr->bufsiz + 4; /* header for SEND DIAGNOSTIC */ 2733 amt = 0 - payload; 2734 buf = ENC_MALLOC(payload); 2735 if (buf == NULL) 2736 return ENOMEM; 2737 2738 ses_page_cdb(cdb, payload, 0, CAM_DIR_OUT); 2739 /* Construct the page request */ 2740 buf[0] = SesStringOut; 2741 buf[1] = 0; 2742 buf[2] = sstr->bufsiz >> 8; 2743 buf[3] = sstr->bufsiz & 0xff; 2744 memcpy(&buf[4], sstr->buf, sstr->bufsiz); 2745 } else if (ioc == ENCIOC_GETSTRING) { 2746 payload = sstr->bufsiz; 2747 amt = payload; 2748 ses_page_cdb(cdb, payload, SesStringIn, CAM_DIR_IN); 2749 buf = sstr->buf; 2750 } else if (ioc == ENCIOC_GETENCNAME) { 2751 if (ses_cache->ses_nsubencs < 1) 2752 return (ENODEV); 2753 enc_desc = ses_cache->subencs[0]; 2754 cam_strvis(vendor, enc_desc->vendor_id, 2755 sizeof(enc_desc->vendor_id), sizeof(vendor)); 2756 cam_strvis(product, enc_desc->product_id, 2757 sizeof(enc_desc->product_id), sizeof(product)); 2758 cam_strvis(rev, enc_desc->product_rev, 2759 sizeof(enc_desc->product_rev), sizeof(rev)); 2760 rsize = snprintf(str, sizeof(str), "%s %s %s", 2761 vendor, product, rev) + 1; 2762 if (rsize > sizeof(str)) 2763 rsize = sizeof(str); 2764 copyout(&rsize, &sstr->bufsiz, sizeof(rsize)); 2765 size = rsize; 2766 if (size > sstr->bufsiz) 2767 size = sstr->bufsiz; 2768 copyout(str, sstr->buf, size); 2769 return (size == rsize ? 0 : ENOMEM); 2770 } else if (ioc == ENCIOC_GETENCID) { 2771 if (ses_cache->ses_nsubencs < 1) 2772 return (ENODEV); 2773 enc_desc = ses_cache->subencs[0]; 2774 rsize = snprintf(str, sizeof(str), "%16jx", 2775 scsi_8btou64(enc_desc->logical_id)) + 1; 2776 if (rsize > sizeof(str)) 2777 rsize = sizeof(str); 2778 copyout(&rsize, &sstr->bufsiz, sizeof(rsize)); 2779 size = rsize; 2780 if (size > sstr->bufsiz) 2781 size = sstr->bufsiz; 2782 copyout(str, sstr->buf, size); 2783 return (size == rsize ? 0 : ENOMEM); 2784 } else 2785 return EINVAL; 2786 2787 ret = enc_runcmd(enc, cdb, 6, buf, &amt); 2788 if (ioc == ENCIOC_SETSTRING) 2789 ENC_FREE(buf); 2790 return ret; 2791 } 2792 2793 /** 2794 * \invariant Called with cam_periph mutex held. 2795 */ 2796 static void 2797 ses_poll_status(enc_softc_t *enc) 2798 { 2799 ses_softc_t *ses; 2800 2801 ses = enc->enc_private; 2802 enc_update_request(enc, SES_UPDATE_GETSTATUS); 2803 if (ses->ses_flags & SES_FLAG_ADDLSTATUS) 2804 enc_update_request(enc, SES_UPDATE_GETELMADDLSTATUS); 2805 } 2806 2807 /** 2808 * \brief Notification received when CAM detects a new device in the 2809 * SCSI domain in which this SEP resides. 2810 * 2811 * \param enc SES enclosure instance. 2812 */ 2813 static void 2814 ses_device_found(enc_softc_t *enc) 2815 { 2816 ses_poll_status(enc); 2817 enc_update_request(enc, SES_PUBLISH_PHYSPATHS); 2818 } 2819 2820 static struct enc_vec ses_enc_vec = 2821 { 2822 .softc_invalidate = ses_softc_invalidate, 2823 .softc_cleanup = ses_softc_cleanup, 2824 .init_enc = ses_init_enc, 2825 .get_enc_status = ses_get_enc_status, 2826 .set_enc_status = ses_set_enc_status, 2827 .get_elm_status = ses_get_elm_status, 2828 .set_elm_status = ses_set_elm_status, 2829 .get_elm_desc = ses_get_elm_desc, 2830 .get_elm_devnames = ses_get_elm_devnames, 2831 .handle_string = ses_handle_string, 2832 .device_found = ses_device_found, 2833 .poll_status = ses_poll_status 2834 }; 2835 2836 /** 2837 * \brief Initialize a new SES instance. 2838 * 2839 * \param enc SES softc structure to set up the instance in. 2840 * \param doinit Do the initialization (see main driver). 2841 * 2842 * \return 0 on success, errno otherwise. 2843 */ 2844 int 2845 ses_softc_init(enc_softc_t *enc) 2846 { 2847 ses_softc_t *ses_softc; 2848 2849 CAM_DEBUG(enc->periph->path, CAM_DEBUG_SUBTRACE, 2850 ("entering enc_softc_init(%p)\n", enc)); 2851 2852 enc->enc_vec = ses_enc_vec; 2853 enc->enc_fsm_states = enc_fsm_states; 2854 2855 if (enc->enc_private == NULL) 2856 enc->enc_private = ENC_MALLOCZ(sizeof(ses_softc_t)); 2857 if (enc->enc_cache.private == NULL) 2858 enc->enc_cache.private = ENC_MALLOCZ(sizeof(ses_cache_t)); 2859 if (enc->enc_daemon_cache.private == NULL) 2860 enc->enc_daemon_cache.private = 2861 ENC_MALLOCZ(sizeof(ses_cache_t)); 2862 2863 if (enc->enc_private == NULL 2864 || enc->enc_cache.private == NULL 2865 || enc->enc_daemon_cache.private == NULL) { 2866 ENC_FREE_AND_NULL(enc->enc_private); 2867 ENC_FREE_AND_NULL(enc->enc_cache.private); 2868 ENC_FREE_AND_NULL(enc->enc_daemon_cache.private); 2869 return (ENOMEM); 2870 } 2871 2872 ses_softc = enc->enc_private; 2873 TAILQ_INIT(&ses_softc->ses_requests); 2874 TAILQ_INIT(&ses_softc->ses_pending_requests); 2875 2876 enc_update_request(enc, SES_UPDATE_PAGES); 2877 2878 // XXX: Move this to the FSM so it doesn't hang init 2879 if (0) (void) ses_set_timed_completion(enc, 1); 2880 2881 return (0); 2882 } 2883 2884