1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2000 Matthew Jacob 5 * Copyright (c) 2010 Spectra Logic Corporation 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions, and the following disclaimer, 13 * without modification, immediately at the beginning of the file. 14 * 2. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 21 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 */ 29 30 /** 31 * \file scsi_enc_ses.c 32 * 33 * Structures and routines specific && private to SES only 34 */ 35 36 #include <sys/cdefs.h> 37 __FBSDID("$FreeBSD$"); 38 39 #include <sys/param.h> 40 41 #include <sys/ctype.h> 42 #include <sys/errno.h> 43 #include <sys/kernel.h> 44 #include <sys/lock.h> 45 #include <sys/malloc.h> 46 #include <sys/mutex.h> 47 #include <sys/queue.h> 48 #include <sys/sbuf.h> 49 #include <sys/sx.h> 50 #include <sys/systm.h> 51 #include <sys/types.h> 52 53 #include <cam/cam.h> 54 #include <cam/cam_ccb.h> 55 #include <cam/cam_xpt_periph.h> 56 #include <cam/cam_periph.h> 57 58 #include <cam/scsi/scsi_message.h> 59 #include <cam/scsi/scsi_enc.h> 60 #include <cam/scsi/scsi_enc_internal.h> 61 62 /* SES Native Type Device Support */ 63 64 /* SES Diagnostic Page Codes */ 65 typedef enum { 66 SesSupportedPages = 0x0, 67 SesConfigPage = 0x1, 68 SesControlPage = 0x2, 69 SesStatusPage = SesControlPage, 70 SesHelpTxt = 0x3, 71 SesStringOut = 0x4, 72 SesStringIn = SesStringOut, 73 SesThresholdOut = 0x5, 74 SesThresholdIn = SesThresholdOut, 75 SesArrayControl = 0x6, /* Obsolete in SES v2 */ 76 SesArrayStatus = SesArrayControl, 77 SesElementDescriptor = 0x7, 78 SesShortStatus = 0x8, 79 SesEnclosureBusy = 0x9, 80 SesAddlElementStatus = 0xa 81 } SesDiagPageCodes; 82 83 typedef struct ses_type { 84 const struct ses_elm_type_desc *hdr; 85 const char *text; 86 } ses_type_t; 87 88 typedef struct ses_comstat { 89 uint8_t comstatus; 90 uint8_t comstat[3]; 91 } ses_comstat_t; 92 93 typedef union ses_addl_data { 94 struct ses_elm_sas_device_phy *sasdev_phys; 95 struct ses_elm_sas_expander_phy *sasexp_phys; 96 struct ses_elm_sas_port_phy *sasport_phys; 97 struct ses_fcobj_port *fc_ports; 98 } ses_add_data_t; 99 100 typedef struct ses_addl_status { 101 struct ses_elm_addlstatus_base_hdr *hdr; 102 union { 103 union ses_fcobj_hdr *fc; 104 union ses_elm_sas_hdr *sas; 105 struct ses_elm_ata_hdr *ata; 106 } proto_hdr; 107 union ses_addl_data proto_data; /* array sizes stored in header */ 108 } ses_add_status_t; 109 110 typedef struct ses_element { 111 uint8_t eip; /* eip bit is set */ 112 uint16_t descr_len; /* length of the descriptor */ 113 const char *descr; /* descriptor for this object */ 114 struct ses_addl_status addl; /* additional status info */ 115 } ses_element_t; 116 117 typedef struct ses_control_request { 118 int elm_idx; 119 ses_comstat_t elm_stat; 120 int result; 121 TAILQ_ENTRY(ses_control_request) links; 122 } ses_control_request_t; 123 TAILQ_HEAD(ses_control_reqlist, ses_control_request); 124 typedef struct ses_control_reqlist ses_control_reqlist_t; 125 enum { 126 SES_SETSTATUS_ENC_IDX = -1 127 }; 128 129 static void 130 ses_terminate_control_requests(ses_control_reqlist_t *reqlist, int result) 131 { 132 ses_control_request_t *req; 133 134 while ((req = TAILQ_FIRST(reqlist)) != NULL) { 135 TAILQ_REMOVE(reqlist, req, links); 136 req->result = result; 137 wakeup(req); 138 } 139 } 140 141 enum ses_iter_index_values { 142 /** 143 * \brief Value of an initialized but invalid index 144 * in a ses_iterator object. 145 * 146 * This value is used for the individual_element_index of 147 * overal status elements and for all index types when 148 * an iterator is first initialized. 149 */ 150 ITERATOR_INDEX_INVALID = -1, 151 152 /** 153 * \brief Value of an index in a ses_iterator object 154 * when the iterator has traversed past the last 155 * valid element.. 156 */ 157 ITERATOR_INDEX_END = INT_MAX 158 }; 159 160 /** 161 * \brief Structure encapsulating all data necessary to traverse the 162 * elements of a SES configuration. 163 * 164 * The ses_iterator object simplifies the task of iterating through all 165 * elements detected via the SES configuration page by tracking the numerous 166 * element indexes that, instead of memoizing in the softc, we calculate 167 * on the fly during the traversal of the element objects. The various 168 * indexes are necessary due to the varying needs of matching objects in 169 * the different SES pages. Some pages (e.g. Status/Control) contain all 170 * elements, while others (e.g. Additional Element Status) only contain 171 * individual elements (no overal status elements) of particular types. 172 * 173 * To use an iterator, initialize it with ses_iter_init(), and then 174 * use ses_iter_next() to traverse the elements (including the first) in 175 * the configuration. Once an iterator is initiailized with ses_iter_init(), 176 * you may also seek to any particular element by either it's global or 177 * individual element index via the ses_iter_seek_to() function. You may 178 * also return an iterator to the position just before the first element 179 * (i.e. the same state as after an ses_iter_init()), with ses_iter_reset(). 180 */ 181 struct ses_iterator { 182 /** 183 * \brief Backlink to the overal software configuration structure. 184 * 185 * This is included for convenience so the iteration functions 186 * need only take a single, struct ses_iterator *, argument. 187 */ 188 enc_softc_t *enc; 189 190 enc_cache_t *cache; 191 192 /** 193 * \brief Index of the type of the current element within the 194 * ses_cache's ses_types array. 195 */ 196 int type_index; 197 198 /** 199 * \brief The position (0 based) of this element relative to all other 200 * elements of this type. 201 * 202 * This index resets to zero every time the iterator transitions 203 * to elements of a new type in the configuration. 204 */ 205 int type_element_index; 206 207 /** 208 * \brief The position (0 based) of this element relative to all 209 * other individual status elements in the configuration. 210 * 211 * This index ranges from 0 through the number of individual 212 * elements in the configuration. When the iterator returns 213 * an overall status element, individual_element_index is 214 * set to ITERATOR_INDEX_INVALID, to indicate that it does 215 * not apply to the current element. 216 */ 217 int individual_element_index; 218 219 /** 220 * \brief The position (0 based) of this element relative to 221 * all elements in the configration. 222 * 223 * This index is appropriate for indexing into enc->ses_elm_map. 224 */ 225 int global_element_index; 226 227 /** 228 * \brief The last valid individual element index of this 229 * iterator. 230 * 231 * When an iterator traverses an overal status element, the 232 * individual element index is reset to ITERATOR_INDEX_INVALID 233 * to prevent unintential use of the individual_element_index 234 * field. The saved_individual_element_index allows the iterator 235 * to restore it's position in the individual elements upon 236 * reaching the next individual element. 237 */ 238 int saved_individual_element_index; 239 }; 240 241 typedef enum { 242 SES_UPDATE_NONE, 243 SES_UPDATE_PAGES, 244 SES_UPDATE_GETCONFIG, 245 SES_UPDATE_GETSTATUS, 246 SES_UPDATE_GETELMDESCS, 247 SES_UPDATE_GETELMADDLSTATUS, 248 SES_PROCESS_CONTROL_REQS, 249 SES_PUBLISH_PHYSPATHS, 250 SES_PUBLISH_CACHE, 251 SES_NUM_UPDATE_STATES 252 } ses_update_action; 253 254 static enc_softc_cleanup_t ses_softc_cleanup; 255 256 #define SCSZ 0x8000 257 258 static fsm_fill_handler_t ses_fill_rcv_diag_io; 259 static fsm_fill_handler_t ses_fill_control_request; 260 static fsm_done_handler_t ses_process_pages; 261 static fsm_done_handler_t ses_process_config; 262 static fsm_done_handler_t ses_process_status; 263 static fsm_done_handler_t ses_process_elm_descs; 264 static fsm_done_handler_t ses_process_elm_addlstatus; 265 static fsm_done_handler_t ses_process_control_request; 266 static fsm_done_handler_t ses_publish_physpaths; 267 static fsm_done_handler_t ses_publish_cache; 268 269 static struct enc_fsm_state enc_fsm_states[SES_NUM_UPDATE_STATES] = 270 { 271 { "SES_UPDATE_NONE", 0, 0, 0, NULL, NULL, NULL }, 272 { 273 "SES_UPDATE_PAGES", 274 SesSupportedPages, 275 SCSZ, 276 60 * 1000, 277 ses_fill_rcv_diag_io, 278 ses_process_pages, 279 enc_error 280 }, 281 { 282 "SES_UPDATE_GETCONFIG", 283 SesConfigPage, 284 SCSZ, 285 60 * 1000, 286 ses_fill_rcv_diag_io, 287 ses_process_config, 288 enc_error 289 }, 290 { 291 "SES_UPDATE_GETSTATUS", 292 SesStatusPage, 293 SCSZ, 294 60 * 1000, 295 ses_fill_rcv_diag_io, 296 ses_process_status, 297 enc_error 298 }, 299 { 300 "SES_UPDATE_GETELMDESCS", 301 SesElementDescriptor, 302 SCSZ, 303 60 * 1000, 304 ses_fill_rcv_diag_io, 305 ses_process_elm_descs, 306 enc_error 307 }, 308 { 309 "SES_UPDATE_GETELMADDLSTATUS", 310 SesAddlElementStatus, 311 SCSZ, 312 60 * 1000, 313 ses_fill_rcv_diag_io, 314 ses_process_elm_addlstatus, 315 enc_error 316 }, 317 { 318 "SES_PROCESS_CONTROL_REQS", 319 SesControlPage, 320 SCSZ, 321 60 * 1000, 322 ses_fill_control_request, 323 ses_process_control_request, 324 enc_error 325 }, 326 { 327 "SES_PUBLISH_PHYSPATHS", 328 0, 329 0, 330 0, 331 NULL, 332 ses_publish_physpaths, 333 NULL 334 }, 335 { 336 "SES_PUBLISH_CACHE", 337 0, 338 0, 339 0, 340 NULL, 341 ses_publish_cache, 342 NULL 343 } 344 }; 345 346 typedef struct ses_cache { 347 /* Source for all the configuration data pointers */ 348 const struct ses_cfg_page *cfg_page; 349 350 /* References into the config page. */ 351 int ses_nsubencs; 352 const struct ses_enc_desc * const *subencs; 353 int ses_ntypes; 354 const ses_type_t *ses_types; 355 356 /* Source for all the status pointers */ 357 const struct ses_status_page *status_page; 358 359 /* Source for all the object descriptor pointers */ 360 const struct ses_elem_descr_page *elm_descs_page; 361 362 /* Source for all the additional object status pointers */ 363 const struct ses_addl_elem_status_page *elm_addlstatus_page; 364 365 } ses_cache_t; 366 367 typedef struct ses_softc { 368 uint32_t ses_flags; 369 #define SES_FLAG_TIMEDCOMP 0x01 370 #define SES_FLAG_ADDLSTATUS 0x02 371 #define SES_FLAG_DESC 0x04 372 373 ses_control_reqlist_t ses_requests; 374 ses_control_reqlist_t ses_pending_requests; 375 } ses_softc_t; 376 377 static int ses_search_globally = 0; 378 SYSCTL_INT(_kern_cam_enc, OID_AUTO, search_globally, CTLFLAG_RWTUN, 379 &ses_search_globally, 0, "Search for disks on other buses"); 380 381 /** 382 * \brief Reset a SES iterator to just before the first element 383 * in the configuration. 384 * 385 * \param iter The iterator object to reset. 386 * 387 * The indexes within a reset iterator are invalid and will only 388 * become valid upon completion of a ses_iter_seek_to() or a 389 * ses_iter_next(). 390 */ 391 static void 392 ses_iter_reset(struct ses_iterator *iter) 393 { 394 /* 395 * Set our indexes to just before the first valid element 396 * of the first type (ITERATOR_INDEX_INVALID == -1). This 397 * simplifies the implementation of ses_iter_next(). 398 */ 399 iter->type_index = 0; 400 iter->type_element_index = ITERATOR_INDEX_INVALID; 401 iter->global_element_index = ITERATOR_INDEX_INVALID; 402 iter->individual_element_index = ITERATOR_INDEX_INVALID; 403 iter->saved_individual_element_index = ITERATOR_INDEX_INVALID; 404 } 405 406 /** 407 * \brief Initialize the storage of a SES iterator and reset it to 408 * the position just before the first element of the 409 * configuration. 410 * 411 * \param enc The SES softc for the SES instance whose configuration 412 * will be enumerated by this iterator. 413 * \param iter The iterator object to initialize. 414 */ 415 static void 416 ses_iter_init(enc_softc_t *enc, enc_cache_t *cache, struct ses_iterator *iter) 417 { 418 iter->enc = enc; 419 iter->cache = cache; 420 ses_iter_reset(iter); 421 } 422 423 /** 424 * \brief Traverse the provided SES iterator to the next element 425 * within the configuration. 426 * 427 * \param iter The iterator to move. 428 * 429 * \return If a valid next element exists, a pointer to it's enc_element_t. 430 * Otherwise NULL. 431 */ 432 static enc_element_t * 433 ses_iter_next(struct ses_iterator *iter) 434 { 435 ses_cache_t *ses_cache; 436 const ses_type_t *element_type; 437 438 ses_cache = iter->cache->private; 439 440 /* 441 * Note: Treat nelms as signed, so we will hit this case 442 * and immediately terminate the iteration if the 443 * configuration has 0 objects. 444 */ 445 if (iter->global_element_index >= (int)iter->cache->nelms - 1) { 446 /* Elements exhausted. */ 447 iter->type_index = ITERATOR_INDEX_END; 448 iter->type_element_index = ITERATOR_INDEX_END; 449 iter->global_element_index = ITERATOR_INDEX_END; 450 iter->individual_element_index = ITERATOR_INDEX_END; 451 iter->saved_individual_element_index = ITERATOR_INDEX_END; 452 return (NULL); 453 } 454 455 KASSERT((iter->type_index < ses_cache->ses_ntypes), 456 ("Corrupted element iterator. %d not less than %d", 457 iter->type_index, ses_cache->ses_ntypes)); 458 459 element_type = &ses_cache->ses_types[iter->type_index]; 460 iter->global_element_index++; 461 iter->type_element_index++; 462 463 /* 464 * There is an object for overal type status in addition 465 * to one for each allowed element, but only if the element 466 * count is non-zero. 467 */ 468 if (iter->type_element_index > element_type->hdr->etype_maxelt) { 469 /* 470 * We've exhausted the elements of this type. 471 * This next element belongs to the next type. 472 */ 473 iter->type_index++; 474 iter->type_element_index = 0; 475 iter->individual_element_index = ITERATOR_INDEX_INVALID; 476 } 477 478 if (iter->type_element_index > 0) { 479 iter->individual_element_index = 480 ++iter->saved_individual_element_index; 481 } 482 483 return (&iter->cache->elm_map[iter->global_element_index]); 484 } 485 486 /** 487 * Element index types tracked by a SES iterator. 488 */ 489 typedef enum { 490 /** 491 * Index relative to all elements (overall and individual) 492 * in the system. 493 */ 494 SES_ELEM_INDEX_GLOBAL, 495 496 /** 497 * \brief Index relative to all individual elements in the system. 498 * 499 * This index counts only individual elements, skipping overall 500 * status elements. This is the index space of the additional 501 * element status page (page 0xa). 502 */ 503 SES_ELEM_INDEX_INDIVIDUAL 504 } ses_elem_index_type_t; 505 506 /** 507 * \brief Move the provided iterator forwards or backwards to the object 508 * having the give index. 509 * 510 * \param iter The iterator on which to perform the seek. 511 * \param element_index The index of the element to find. 512 * \param index_type The type (global or individual) of element_index. 513 * 514 * \return If the element is found, a pointer to it's enc_element_t. 515 * Otherwise NULL. 516 */ 517 static enc_element_t * 518 ses_iter_seek_to(struct ses_iterator *iter, int element_index, 519 ses_elem_index_type_t index_type) 520 { 521 enc_element_t *element; 522 int *cur_index; 523 524 if (index_type == SES_ELEM_INDEX_GLOBAL) 525 cur_index = &iter->global_element_index; 526 else 527 cur_index = &iter->individual_element_index; 528 529 if (*cur_index == element_index) { 530 /* Already there. */ 531 return (&iter->cache->elm_map[iter->global_element_index]); 532 } 533 534 ses_iter_reset(iter); 535 while ((element = ses_iter_next(iter)) != NULL 536 && *cur_index != element_index) 537 ; 538 539 if (*cur_index != element_index) 540 return (NULL); 541 542 return (element); 543 } 544 545 #if 0 546 static int ses_encode(enc_softc_t *, uint8_t *, int, int, 547 struct ses_comstat *); 548 #endif 549 static int ses_set_timed_completion(enc_softc_t *, uint8_t); 550 #if 0 551 static int ses_putstatus(enc_softc_t *, int, struct ses_comstat *); 552 #endif 553 554 static void ses_poll_status(enc_softc_t *); 555 static void ses_print_addl_data(enc_softc_t *, enc_element_t *); 556 557 /*=========================== SES cleanup routines ===========================*/ 558 559 static void 560 ses_cache_free_elm_addlstatus(enc_softc_t *enc, enc_cache_t *cache) 561 { 562 ses_cache_t *ses_cache; 563 ses_cache_t *other_ses_cache; 564 enc_element_t *cur_elm; 565 enc_element_t *last_elm; 566 567 ENC_DLOG(enc, "%s: enter\n", __func__); 568 ses_cache = cache->private; 569 if (ses_cache->elm_addlstatus_page == NULL) 570 return; 571 572 for (cur_elm = cache->elm_map, 573 last_elm = &cache->elm_map[cache->nelms]; 574 cur_elm != last_elm; cur_elm++) { 575 ses_element_t *elmpriv; 576 577 elmpriv = cur_elm->elm_private; 578 579 /* Clear references to the additional status page. */ 580 bzero(&elmpriv->addl, sizeof(elmpriv->addl)); 581 } 582 583 other_ses_cache = enc_other_cache(enc, cache)->private; 584 if (other_ses_cache->elm_addlstatus_page 585 != ses_cache->elm_addlstatus_page) 586 ENC_FREE(ses_cache->elm_addlstatus_page); 587 ses_cache->elm_addlstatus_page = NULL; 588 } 589 590 static void 591 ses_cache_free_elm_descs(enc_softc_t *enc, enc_cache_t *cache) 592 { 593 ses_cache_t *ses_cache; 594 ses_cache_t *other_ses_cache; 595 enc_element_t *cur_elm; 596 enc_element_t *last_elm; 597 598 ENC_DLOG(enc, "%s: enter\n", __func__); 599 ses_cache = cache->private; 600 if (ses_cache->elm_descs_page == NULL) 601 return; 602 603 for (cur_elm = cache->elm_map, 604 last_elm = &cache->elm_map[cache->nelms]; 605 cur_elm != last_elm; cur_elm++) { 606 ses_element_t *elmpriv; 607 608 elmpriv = cur_elm->elm_private; 609 elmpriv->descr_len = 0; 610 elmpriv->descr = NULL; 611 } 612 613 other_ses_cache = enc_other_cache(enc, cache)->private; 614 if (other_ses_cache->elm_descs_page 615 != ses_cache->elm_descs_page) 616 ENC_FREE(ses_cache->elm_descs_page); 617 ses_cache->elm_descs_page = NULL; 618 } 619 620 static void 621 ses_cache_free_status(enc_softc_t *enc, enc_cache_t *cache) 622 { 623 ses_cache_t *ses_cache; 624 ses_cache_t *other_ses_cache; 625 626 ENC_DLOG(enc, "%s: enter\n", __func__); 627 ses_cache = cache->private; 628 if (ses_cache->status_page == NULL) 629 return; 630 631 other_ses_cache = enc_other_cache(enc, cache)->private; 632 if (other_ses_cache->status_page != ses_cache->status_page) 633 ENC_FREE(ses_cache->status_page); 634 ses_cache->status_page = NULL; 635 } 636 637 static void 638 ses_cache_free_elm_map(enc_softc_t *enc, enc_cache_t *cache) 639 { 640 enc_element_t *cur_elm; 641 enc_element_t *last_elm; 642 643 ENC_DLOG(enc, "%s: enter\n", __func__); 644 if (cache->elm_map == NULL) 645 return; 646 647 ses_cache_free_elm_descs(enc, cache); 648 ses_cache_free_elm_addlstatus(enc, cache); 649 for (cur_elm = cache->elm_map, 650 last_elm = &cache->elm_map[cache->nelms]; 651 cur_elm != last_elm; cur_elm++) { 652 ENC_FREE_AND_NULL(cur_elm->elm_private); 653 } 654 ENC_FREE_AND_NULL(cache->elm_map); 655 cache->nelms = 0; 656 ENC_DLOG(enc, "%s: exit\n", __func__); 657 } 658 659 static void 660 ses_cache_free(enc_softc_t *enc, enc_cache_t *cache) 661 { 662 ses_cache_t *other_ses_cache; 663 ses_cache_t *ses_cache; 664 665 ENC_DLOG(enc, "%s: enter\n", __func__); 666 ses_cache_free_elm_addlstatus(enc, cache); 667 ses_cache_free_status(enc, cache); 668 ses_cache_free_elm_map(enc, cache); 669 670 ses_cache = cache->private; 671 ses_cache->ses_ntypes = 0; 672 673 other_ses_cache = enc_other_cache(enc, cache)->private; 674 if (other_ses_cache->subencs != ses_cache->subencs) 675 ENC_FREE(ses_cache->subencs); 676 ses_cache->subencs = NULL; 677 678 if (other_ses_cache->ses_types != ses_cache->ses_types) 679 ENC_FREE(ses_cache->ses_types); 680 ses_cache->ses_types = NULL; 681 682 if (other_ses_cache->cfg_page != ses_cache->cfg_page) 683 ENC_FREE(ses_cache->cfg_page); 684 ses_cache->cfg_page = NULL; 685 686 ENC_DLOG(enc, "%s: exit\n", __func__); 687 } 688 689 static void 690 ses_cache_clone(enc_softc_t *enc, enc_cache_t *src, enc_cache_t *dst) 691 { 692 ses_cache_t *dst_ses_cache; 693 ses_cache_t *src_ses_cache; 694 enc_element_t *src_elm; 695 enc_element_t *dst_elm; 696 enc_element_t *last_elm; 697 698 ses_cache_free(enc, dst); 699 src_ses_cache = src->private; 700 dst_ses_cache = dst->private; 701 702 /* 703 * The cloned enclosure cache and ses specific cache are 704 * mostly identical to the source. 705 */ 706 *dst = *src; 707 *dst_ses_cache = *src_ses_cache; 708 709 /* 710 * But the ses cache storage is still independent. Restore 711 * the pointer that was clobbered by the structure copy above. 712 */ 713 dst->private = dst_ses_cache; 714 715 /* 716 * The element map is independent even though it starts out 717 * pointing to the same constant page data. 718 */ 719 dst->elm_map = malloc(dst->nelms * sizeof(enc_element_t), 720 M_SCSIENC, M_WAITOK); 721 memcpy(dst->elm_map, src->elm_map, dst->nelms * sizeof(enc_element_t)); 722 for (dst_elm = dst->elm_map, src_elm = src->elm_map, 723 last_elm = &src->elm_map[src->nelms]; 724 src_elm != last_elm; src_elm++, dst_elm++) { 725 dst_elm->elm_private = malloc(sizeof(ses_element_t), 726 M_SCSIENC, M_WAITOK); 727 memcpy(dst_elm->elm_private, src_elm->elm_private, 728 sizeof(ses_element_t)); 729 } 730 } 731 732 /* Structure accessors. These are strongly typed to avoid errors. */ 733 734 int 735 ses_elm_sas_descr_type(union ses_elm_sas_hdr *obj) 736 { 737 return ((obj)->base_hdr.byte1 >> 6); 738 } 739 int 740 ses_elm_addlstatus_proto(struct ses_elm_addlstatus_base_hdr *hdr) 741 { 742 return ((hdr)->byte0 & 0xf); 743 } 744 int 745 ses_elm_addlstatus_eip(struct ses_elm_addlstatus_base_hdr *hdr) 746 { 747 return ((hdr)->byte0 >> 4 & 0x1); 748 } 749 int 750 ses_elm_addlstatus_invalid(struct ses_elm_addlstatus_base_hdr *hdr) 751 { 752 return ((hdr)->byte0 >> 7); 753 } 754 int 755 ses_elm_sas_type0_not_all_phys(union ses_elm_sas_hdr *hdr) 756 { 757 return ((hdr)->type0_noneip.byte1 & 0x1); 758 } 759 int 760 ses_elm_sas_dev_phy_sata_dev(struct ses_elm_sas_device_phy *phy) 761 { 762 return ((phy)->target_ports & 0x1); 763 } 764 int 765 ses_elm_sas_dev_phy_sata_port(struct ses_elm_sas_device_phy *phy) 766 { 767 return ((phy)->target_ports >> 7); 768 } 769 int 770 ses_elm_sas_dev_phy_dev_type(struct ses_elm_sas_device_phy *phy) 771 { 772 return (((phy)->byte0 >> 4) & 0x7); 773 } 774 775 /** 776 * \brief Verify that the cached configuration data in our softc 777 * is valid for processing the page data corresponding to 778 * the provided page header. 779 * 780 * \param ses_cache The SES cache to validate. 781 * \param gen_code The 4 byte generation code from a SES diagnostic 782 * page header. 783 * 784 * \return non-zero if true, 0 if false. 785 */ 786 static int 787 ses_config_cache_valid(ses_cache_t *ses_cache, const uint8_t *gen_code) 788 { 789 uint32_t cache_gc; 790 uint32_t cur_gc; 791 792 if (ses_cache->cfg_page == NULL) 793 return (0); 794 795 cache_gc = scsi_4btoul(ses_cache->cfg_page->hdr.gen_code); 796 cur_gc = scsi_4btoul(gen_code); 797 return (cache_gc == cur_gc); 798 } 799 800 /** 801 * Function signature for consumers of the ses_devids_iter() interface. 802 */ 803 typedef void ses_devid_callback_t(enc_softc_t *, enc_element_t *, 804 struct scsi_vpd_id_descriptor *, void *); 805 806 /** 807 * \brief Iterate over and create vpd device id records from the 808 * additional element status data for elm, passing that data 809 * to the provided callback. 810 * 811 * \param enc SES instance containing elm 812 * \param elm Element for which to extract device ID data. 813 * \param callback The callback function to invoke on each generated 814 * device id descriptor for elm. 815 * \param callback_arg Argument passed through to callback on each invocation. 816 */ 817 static void 818 ses_devids_iter(enc_softc_t *enc, enc_element_t *elm, 819 ses_devid_callback_t *callback, void *callback_arg) 820 { 821 ses_element_t *elmpriv; 822 struct ses_addl_status *addl; 823 u_int i; 824 size_t devid_record_size; 825 826 elmpriv = elm->elm_private; 827 addl = &(elmpriv->addl); 828 829 devid_record_size = SVPD_DEVICE_ID_DESC_HDR_LEN 830 + sizeof(struct scsi_vpd_id_naa_ieee_reg); 831 for (i = 0; i < addl->proto_hdr.sas->base_hdr.num_phys; i++) { 832 uint8_t devid_buf[devid_record_size]; 833 struct scsi_vpd_id_descriptor *devid; 834 uint8_t *phy_addr; 835 836 devid = (struct scsi_vpd_id_descriptor *)devid_buf; 837 phy_addr = addl->proto_data.sasdev_phys[i].phy_addr; 838 devid->proto_codeset = (SCSI_PROTO_SAS << SVPD_ID_PROTO_SHIFT) 839 | SVPD_ID_CODESET_BINARY; 840 devid->id_type = SVPD_ID_PIV 841 | SVPD_ID_ASSOC_PORT 842 | SVPD_ID_TYPE_NAA; 843 devid->reserved = 0; 844 devid->length = sizeof(struct scsi_vpd_id_naa_ieee_reg); 845 memcpy(devid->identifier, phy_addr, devid->length); 846 847 callback(enc, elm, devid, callback_arg); 848 } 849 } 850 851 /** 852 * Function signature for consumers of the ses_paths_iter() interface. 853 */ 854 typedef void ses_path_callback_t(enc_softc_t *, enc_element_t *, 855 struct cam_path *, void *); 856 857 /** 858 * Argument package passed through ses_devids_iter() by 859 * ses_paths_iter() to ses_path_iter_devid_callback(). 860 */ 861 typedef struct ses_path_iter_args { 862 ses_path_callback_t *callback; 863 void *callback_arg; 864 } ses_path_iter_args_t; 865 866 /** 867 * ses_devids_iter() callback function used by ses_paths_iter() 868 * to map device ids to peripheral driver instances. 869 * 870 * \param enc SES instance containing elm 871 * \param elm Element on which device ID matching is active. 872 * \param periph A device ID corresponding to elm. 873 * \param arg Argument passed through to callback on each invocation. 874 */ 875 static void 876 ses_path_iter_devid_callback(enc_softc_t *enc, enc_element_t *elem, 877 struct scsi_vpd_id_descriptor *devid, 878 void *arg) 879 { 880 struct ccb_dev_match cdm; 881 struct dev_match_pattern match_pattern; 882 struct dev_match_result match_result; 883 struct device_match_result *device_match; 884 struct device_match_pattern *device_pattern; 885 ses_path_iter_args_t *args; 886 struct cam_path *path; 887 888 args = (ses_path_iter_args_t *)arg; 889 match_pattern.type = DEV_MATCH_DEVICE; 890 device_pattern = &match_pattern.pattern.device_pattern; 891 device_pattern->flags = DEV_MATCH_DEVID; 892 device_pattern->data.devid_pat.id_len = 893 offsetof(struct scsi_vpd_id_descriptor, identifier) 894 + devid->length; 895 memcpy(device_pattern->data.devid_pat.id, devid, 896 device_pattern->data.devid_pat.id_len); 897 if (!ses_search_globally) { 898 device_pattern->flags |= DEV_MATCH_PATH; 899 device_pattern->path_id = xpt_path_path_id(enc->periph->path); 900 } 901 902 memset(&cdm, 0, sizeof(cdm)); 903 if (xpt_create_path(&cdm.ccb_h.path, /*periph*/NULL, 904 CAM_XPT_PATH_ID, 905 CAM_TARGET_WILDCARD, 906 CAM_LUN_WILDCARD) != CAM_REQ_CMP) 907 return; 908 909 cdm.ccb_h.func_code = XPT_DEV_MATCH; 910 cdm.num_patterns = 1; 911 cdm.patterns = &match_pattern; 912 cdm.pattern_buf_len = sizeof(match_pattern); 913 cdm.match_buf_len = sizeof(match_result); 914 cdm.matches = &match_result; 915 916 do { 917 xpt_action((union ccb *)&cdm); 918 919 if ((cdm.ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP || 920 (cdm.status != CAM_DEV_MATCH_LAST && 921 cdm.status != CAM_DEV_MATCH_MORE) || 922 cdm.num_matches == 0) 923 break; 924 925 device_match = &match_result.result.device_result; 926 if (xpt_create_path(&path, /*periph*/NULL, 927 device_match->path_id, 928 device_match->target_id, 929 device_match->target_lun) == CAM_REQ_CMP) { 930 args->callback(enc, elem, path, args->callback_arg); 931 932 xpt_free_path(path); 933 } 934 } while (cdm.status == CAM_DEV_MATCH_MORE); 935 936 xpt_free_path(cdm.ccb_h.path); 937 } 938 939 /** 940 * \brief Iterate over and find the matching periph objects for the 941 * specified element. 942 * 943 * \param enc SES instance containing elm 944 * \param elm Element for which to perform periph object matching. 945 * \param callback The callback function to invoke with each matching 946 * periph object. 947 * \param callback_arg Argument passed through to callback on each invocation. 948 */ 949 static void 950 ses_paths_iter(enc_softc_t *enc, enc_element_t *elm, 951 ses_path_callback_t *callback, void *callback_arg) 952 { 953 ses_element_t *elmpriv; 954 struct ses_addl_status *addl; 955 956 elmpriv = elm->elm_private; 957 addl = &(elmpriv->addl); 958 959 if (addl->hdr == NULL) 960 return; 961 962 switch(ses_elm_addlstatus_proto(addl->hdr)) { 963 case SPSP_PROTO_SAS: 964 if (addl->proto_hdr.sas != NULL && 965 addl->proto_data.sasdev_phys != NULL) { 966 ses_path_iter_args_t args; 967 968 args.callback = callback; 969 args.callback_arg = callback_arg; 970 ses_devids_iter(enc, elm, ses_path_iter_devid_callback, 971 &args); 972 } 973 break; 974 case SPSP_PROTO_ATA: 975 if (addl->proto_hdr.ata != NULL) { 976 struct cam_path *path; 977 struct ccb_getdev cgd; 978 979 if (xpt_create_path(&path, /*periph*/NULL, 980 scsi_4btoul(addl->proto_hdr.ata->bus), 981 scsi_4btoul(addl->proto_hdr.ata->target), 0) 982 != CAM_REQ_CMP) 983 return; 984 985 memset(&cgd, 0, sizeof(cgd)); 986 xpt_setup_ccb(&cgd.ccb_h, path, CAM_PRIORITY_NORMAL); 987 cgd.ccb_h.func_code = XPT_GDEV_TYPE; 988 xpt_action((union ccb *)&cgd); 989 if (cam_ccb_success((union ccb *)&cgd)) 990 callback(enc, elm, path, callback_arg); 991 992 xpt_free_path(path); 993 } 994 break; 995 } 996 } 997 998 /** 999 * ses_paths_iter() callback function used by ses_get_elmdevname() 1000 * to record periph driver instance strings corresponding to a SES 1001 * element. 1002 * 1003 * \param enc SES instance containing elm 1004 * \param elm Element on which periph matching is active. 1005 * \param periph A periph instance that matches elm. 1006 * \param arg Argument passed through to callback on each invocation. 1007 */ 1008 static void 1009 ses_elmdevname_callback(enc_softc_t *enc, enc_element_t *elem, 1010 struct cam_path *path, void *arg) 1011 { 1012 struct sbuf *sb; 1013 1014 sb = (struct sbuf *)arg; 1015 cam_periph_list(path, sb); 1016 } 1017 1018 /** 1019 * Argument package passed through ses_paths_iter() to 1020 * ses_getcampath_callback. 1021 */ 1022 typedef struct ses_setphyspath_callback_args { 1023 struct sbuf *physpath; 1024 int num_set; 1025 } ses_setphyspath_callback_args_t; 1026 1027 /** 1028 * \brief ses_paths_iter() callback to set the physical path on the 1029 * CAM EDT entries corresponding to a given SES element. 1030 * 1031 * \param enc SES instance containing elm 1032 * \param elm Element on which periph matching is active. 1033 * \param periph A periph instance that matches elm. 1034 * \param arg Argument passed through to callback on each invocation. 1035 */ 1036 static void 1037 ses_setphyspath_callback(enc_softc_t *enc, enc_element_t *elm, 1038 struct cam_path *path, void *arg) 1039 { 1040 struct ccb_dev_advinfo cdai; 1041 ses_setphyspath_callback_args_t *args; 1042 char *old_physpath; 1043 1044 args = (ses_setphyspath_callback_args_t *)arg; 1045 old_physpath = malloc(MAXPATHLEN, M_SCSIENC, M_WAITOK|M_ZERO); 1046 xpt_path_lock(path); 1047 memset(&cdai, 0, sizeof(cdai)); 1048 xpt_setup_ccb(&cdai.ccb_h, path, CAM_PRIORITY_NORMAL); 1049 cdai.ccb_h.func_code = XPT_DEV_ADVINFO; 1050 cdai.buftype = CDAI_TYPE_PHYS_PATH; 1051 cdai.flags = CDAI_FLAG_NONE; 1052 cdai.bufsiz = MAXPATHLEN; 1053 cdai.buf = old_physpath; 1054 xpt_action((union ccb *)&cdai); 1055 if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0) 1056 cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE); 1057 1058 if (strcmp(old_physpath, sbuf_data(args->physpath)) != 0) { 1059 xpt_setup_ccb(&cdai.ccb_h, path, CAM_PRIORITY_NORMAL); 1060 cdai.ccb_h.func_code = XPT_DEV_ADVINFO; 1061 cdai.buftype = CDAI_TYPE_PHYS_PATH; 1062 cdai.flags = CDAI_FLAG_STORE; 1063 cdai.bufsiz = sbuf_len(args->physpath); 1064 cdai.buf = sbuf_data(args->physpath); 1065 xpt_action((union ccb *)&cdai); 1066 if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0) 1067 cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE); 1068 if (cam_ccb_success((union ccb *)&cdai)) 1069 args->num_set++; 1070 } 1071 xpt_path_unlock(path); 1072 free(old_physpath, M_SCSIENC); 1073 } 1074 1075 /** 1076 * \brief Set a device's physical path string in CAM XPT. 1077 * 1078 * \param enc SES instance containing elm 1079 * \param elm Element to publish physical path string for 1080 * \param iter Iterator whose state corresponds to elm 1081 * 1082 * \return 0 on success, errno otherwise. 1083 */ 1084 static int 1085 ses_set_physpath(enc_softc_t *enc, enc_element_t *elm, 1086 struct ses_iterator *iter) 1087 { 1088 struct ccb_dev_advinfo cdai; 1089 ses_setphyspath_callback_args_t args; 1090 int i, ret; 1091 struct sbuf sb; 1092 struct scsi_vpd_id_descriptor *idd; 1093 uint8_t *devid; 1094 ses_element_t *elmpriv; 1095 const char *c; 1096 1097 ret = EIO; 1098 devid = NULL; 1099 1100 elmpriv = elm->elm_private; 1101 if (elmpriv->addl.hdr == NULL) 1102 goto out; 1103 1104 /* 1105 * Assemble the components of the physical path starting with 1106 * the device ID of the enclosure itself. 1107 */ 1108 memset(&cdai, 0, sizeof(cdai)); 1109 xpt_setup_ccb(&cdai.ccb_h, enc->periph->path, CAM_PRIORITY_NORMAL); 1110 cdai.ccb_h.func_code = XPT_DEV_ADVINFO; 1111 cdai.flags = CDAI_FLAG_NONE; 1112 cdai.buftype = CDAI_TYPE_SCSI_DEVID; 1113 cdai.bufsiz = CAM_SCSI_DEVID_MAXLEN; 1114 cdai.buf = devid = malloc(cdai.bufsiz, M_SCSIENC, M_WAITOK|M_ZERO); 1115 cam_periph_lock(enc->periph); 1116 xpt_action((union ccb *)&cdai); 1117 if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0) 1118 cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE); 1119 cam_periph_unlock(enc->periph); 1120 if (cdai.ccb_h.status != CAM_REQ_CMP) 1121 goto out; 1122 1123 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf, 1124 cdai.provsiz, scsi_devid_is_naa_ieee_reg); 1125 if (idd == NULL) 1126 goto out; 1127 1128 if (sbuf_new(&sb, NULL, 128, SBUF_AUTOEXTEND) == NULL) { 1129 ret = ENOMEM; 1130 goto out; 1131 } 1132 /* Next, generate the physical path string */ 1133 sbuf_printf(&sb, "id1,enc@n%jx/type@%x/slot@%x", 1134 scsi_8btou64(idd->identifier), iter->type_index, 1135 iter->type_element_index); 1136 /* Append the element descriptor if one exists */ 1137 if (elmpriv->descr != NULL && elmpriv->descr_len > 0) { 1138 sbuf_cat(&sb, "/elmdesc@"); 1139 for (i = 0, c = elmpriv->descr; i < elmpriv->descr_len; 1140 i++, c++) { 1141 if (!isprint(*c) || isspace(*c) || *c == '/') 1142 sbuf_putc(&sb, '_'); 1143 else 1144 sbuf_putc(&sb, *c); 1145 } 1146 } 1147 sbuf_finish(&sb); 1148 1149 /* 1150 * Set this physical path on any CAM devices with a device ID 1151 * descriptor that matches one created from the SES additional 1152 * status data for this element. 1153 */ 1154 args.physpath= &sb; 1155 args.num_set = 0; 1156 ses_paths_iter(enc, elm, ses_setphyspath_callback, &args); 1157 sbuf_delete(&sb); 1158 1159 ret = args.num_set == 0 ? ENOENT : 0; 1160 1161 out: 1162 if (devid != NULL) 1163 ENC_FREE(devid); 1164 return (ret); 1165 } 1166 1167 /** 1168 * \brief Helper to set the CDB fields appropriately. 1169 * 1170 * \param cdb Buffer containing the cdb. 1171 * \param pagenum SES diagnostic page to query for. 1172 * \param dir Direction of query. 1173 */ 1174 static void 1175 ses_page_cdb(char *cdb, int bufsiz, SesDiagPageCodes pagenum, int dir) 1176 { 1177 1178 /* Ref: SPC-4 r25 Section 6.20 Table 223 */ 1179 if (dir == CAM_DIR_IN) { 1180 cdb[0] = RECEIVE_DIAGNOSTIC; 1181 cdb[1] = 1; /* Set page code valid bit */ 1182 cdb[2] = pagenum; 1183 } else { 1184 cdb[0] = SEND_DIAGNOSTIC; 1185 cdb[1] = 0x10; 1186 cdb[2] = pagenum; 1187 } 1188 cdb[3] = bufsiz >> 8; /* high bits */ 1189 cdb[4] = bufsiz & 0xff; /* low bits */ 1190 cdb[5] = 0; 1191 } 1192 1193 /** 1194 * \brief Discover whether this instance supports timed completion of a 1195 * RECEIVE DIAGNOSTIC RESULTS command requesting the Enclosure Status 1196 * page, and store the result in the softc, updating if necessary. 1197 * 1198 * \param enc SES instance to query and update. 1199 * \param tc_en Value of timed completion to set (see \return). 1200 * 1201 * \return 1 if timed completion enabled, 0 otherwise. 1202 */ 1203 static int 1204 ses_set_timed_completion(enc_softc_t *enc, uint8_t tc_en) 1205 { 1206 union ccb *ccb; 1207 struct cam_periph *periph; 1208 struct ses_mgmt_mode_page *mgmt; 1209 uint8_t *mode_buf; 1210 size_t mode_buf_len; 1211 ses_softc_t *ses; 1212 1213 periph = enc->periph; 1214 ses = enc->enc_private; 1215 ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL); 1216 1217 mode_buf_len = sizeof(struct ses_mgmt_mode_page); 1218 mode_buf = ENC_MALLOCZ(mode_buf_len); 1219 if (mode_buf == NULL) 1220 goto out; 1221 1222 scsi_mode_sense(&ccb->csio, /*retries*/4, NULL, MSG_SIMPLE_Q_TAG, 1223 /*dbd*/FALSE, SMS_PAGE_CTRL_CURRENT, SES_MGMT_MODE_PAGE_CODE, 1224 mode_buf, mode_buf_len, SSD_FULL_SIZE, /*timeout*/60 * 1000); 1225 1226 /* 1227 * Ignore illegal request errors, as they are quite common and we 1228 * will print something out in that case anyway. 1229 */ 1230 cam_periph_runccb(ccb, enc_error, ENC_CFLAGS, 1231 ENC_FLAGS|SF_QUIET_IR, NULL); 1232 if (ccb->ccb_h.status != CAM_REQ_CMP) { 1233 ENC_VLOG(enc, "Timed Completion Unsupported\n"); 1234 goto release; 1235 } 1236 1237 /* Skip the mode select if the desired value is already set */ 1238 mgmt = (struct ses_mgmt_mode_page *)mode_buf; 1239 if ((mgmt->byte5 & SES_MGMT_TIMED_COMP_EN) == tc_en) 1240 goto done; 1241 1242 /* Value is not what we wanted, set it */ 1243 if (tc_en) 1244 mgmt->byte5 |= SES_MGMT_TIMED_COMP_EN; 1245 else 1246 mgmt->byte5 &= ~SES_MGMT_TIMED_COMP_EN; 1247 /* SES2r20: a completion time of zero means as long as possible */ 1248 bzero(&mgmt->max_comp_time, sizeof(mgmt->max_comp_time)); 1249 1250 scsi_mode_select(&ccb->csio, 5, NULL, MSG_SIMPLE_Q_TAG, 1251 /*page_fmt*/FALSE, /*save_pages*/TRUE, mode_buf, mode_buf_len, 1252 SSD_FULL_SIZE, /*timeout*/60 * 1000); 1253 1254 cam_periph_runccb(ccb, enc_error, ENC_CFLAGS, ENC_FLAGS, NULL); 1255 if (ccb->ccb_h.status != CAM_REQ_CMP) { 1256 ENC_VLOG(enc, "Timed Completion Set Failed\n"); 1257 goto release; 1258 } 1259 1260 done: 1261 if ((mgmt->byte5 & SES_MGMT_TIMED_COMP_EN) != 0) { 1262 ENC_LOG(enc, "Timed Completion Enabled\n"); 1263 ses->ses_flags |= SES_FLAG_TIMEDCOMP; 1264 } else { 1265 ENC_LOG(enc, "Timed Completion Disabled\n"); 1266 ses->ses_flags &= ~SES_FLAG_TIMEDCOMP; 1267 } 1268 release: 1269 ENC_FREE(mode_buf); 1270 xpt_release_ccb(ccb); 1271 out: 1272 return (ses->ses_flags & SES_FLAG_TIMEDCOMP); 1273 } 1274 1275 /** 1276 * \brief Process the list of supported pages and update flags. 1277 * 1278 * \param enc SES device to query. 1279 * \param buf Buffer containing the config page. 1280 * \param xfer_len Length of the config page in the buffer. 1281 * 1282 * \return 0 on success, errno otherwise. 1283 */ 1284 static int 1285 ses_process_pages(enc_softc_t *enc, struct enc_fsm_state *state, 1286 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 1287 { 1288 ses_softc_t *ses; 1289 struct scsi_diag_page *page; 1290 int err, i, length; 1291 1292 CAM_DEBUG(enc->periph->path, CAM_DEBUG_SUBTRACE, 1293 ("entering %s(%p, %d)\n", __func__, bufp, xfer_len)); 1294 ses = enc->enc_private; 1295 err = -1; 1296 1297 if (error != 0) { 1298 err = error; 1299 goto out; 1300 } 1301 if (xfer_len < sizeof(*page)) { 1302 ENC_VLOG(enc, "Unable to parse Diag Pages List Header\n"); 1303 err = EIO; 1304 goto out; 1305 } 1306 page = (struct scsi_diag_page *)*bufp; 1307 length = scsi_2btoul(page->length); 1308 if (length + offsetof(struct scsi_diag_page, params) > xfer_len) { 1309 ENC_VLOG(enc, "Diag Pages List Too Long\n"); 1310 goto out; 1311 } 1312 ENC_DLOG(enc, "%s: page length %d, xfer_len %d\n", 1313 __func__, length, xfer_len); 1314 1315 err = 0; 1316 for (i = 0; i < length; i++) { 1317 if (page->params[i] == SesElementDescriptor) 1318 ses->ses_flags |= SES_FLAG_DESC; 1319 else if (page->params[i] == SesAddlElementStatus) 1320 ses->ses_flags |= SES_FLAG_ADDLSTATUS; 1321 } 1322 1323 out: 1324 ENC_DLOG(enc, "%s: exiting with err %d\n", __func__, err); 1325 return (err); 1326 } 1327 1328 /** 1329 * \brief Process the config page and update associated structures. 1330 * 1331 * \param enc SES device to query. 1332 * \param buf Buffer containing the config page. 1333 * \param xfer_len Length of the config page in the buffer. 1334 * 1335 * \return 0 on success, errno otherwise. 1336 */ 1337 static int 1338 ses_process_config(enc_softc_t *enc, struct enc_fsm_state *state, 1339 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 1340 { 1341 struct ses_iterator iter; 1342 enc_cache_t *enc_cache; 1343 ses_cache_t *ses_cache; 1344 uint8_t *buf; 1345 int length; 1346 int err; 1347 int nelm; 1348 int ntype; 1349 struct ses_cfg_page *cfg_page; 1350 struct ses_enc_desc *buf_subenc; 1351 const struct ses_enc_desc **subencs; 1352 const struct ses_enc_desc **cur_subenc; 1353 const struct ses_enc_desc **last_subenc; 1354 ses_type_t *ses_types; 1355 ses_type_t *sestype; 1356 const struct ses_elm_type_desc *cur_buf_type; 1357 const struct ses_elm_type_desc *last_buf_type; 1358 uint8_t *last_valid_byte; 1359 enc_element_t *element; 1360 const char *type_text; 1361 1362 CAM_DEBUG(enc->periph->path, CAM_DEBUG_SUBTRACE, 1363 ("entering %s(%p, %d)\n", __func__, bufp, xfer_len)); 1364 enc_cache = &enc->enc_daemon_cache; 1365 ses_cache = enc_cache->private; 1366 buf = *bufp; 1367 err = -1; 1368 1369 if (error != 0) { 1370 err = error; 1371 goto out; 1372 } 1373 if (xfer_len < sizeof(cfg_page->hdr)) { 1374 ENC_VLOG(enc, "Unable to parse SES Config Header\n"); 1375 err = EIO; 1376 goto out; 1377 } 1378 1379 cfg_page = (struct ses_cfg_page *)buf; 1380 length = ses_page_length(&cfg_page->hdr); 1381 if (length > xfer_len) { 1382 ENC_VLOG(enc, "Enclosure Config Page Too Long\n"); 1383 goto out; 1384 } 1385 last_valid_byte = &buf[length - 1]; 1386 1387 ENC_DLOG(enc, "%s: total page length %d, xfer_len %d\n", 1388 __func__, length, xfer_len); 1389 1390 err = 0; 1391 if (ses_config_cache_valid(ses_cache, cfg_page->hdr.gen_code)) { 1392 /* Our cache is still valid. Proceed to fetching status. */ 1393 goto out; 1394 } 1395 1396 /* Cache is no longer valid. Free old data to make way for new. */ 1397 ses_cache_free(enc, enc_cache); 1398 ENC_VLOG(enc, "Generation Code 0x%x has %d SubEnclosures\n", 1399 scsi_4btoul(cfg_page->hdr.gen_code), 1400 ses_cfg_page_get_num_subenc(cfg_page)); 1401 1402 /* Take ownership of the buffer. */ 1403 ses_cache->cfg_page = cfg_page; 1404 *bufp = NULL; 1405 1406 /* 1407 * Now waltz through all the subenclosures summing the number of 1408 * types available in each. 1409 */ 1410 subencs = malloc(ses_cfg_page_get_num_subenc(cfg_page) 1411 * sizeof(*subencs), M_SCSIENC, M_WAITOK|M_ZERO); 1412 /* 1413 * Sub-enclosure data is const after construction (i.e. when 1414 * accessed via our cache object. 1415 * 1416 * The cast here is not required in C++ but C99 is not so 1417 * sophisticated (see C99 6.5.16.1(1)). 1418 */ 1419 ses_cache->ses_nsubencs = ses_cfg_page_get_num_subenc(cfg_page); 1420 ses_cache->subencs = subencs; 1421 1422 buf_subenc = cfg_page->subencs; 1423 cur_subenc = subencs; 1424 last_subenc = &subencs[ses_cache->ses_nsubencs - 1]; 1425 ntype = 0; 1426 while (cur_subenc <= last_subenc) { 1427 if (!ses_enc_desc_is_complete(buf_subenc, last_valid_byte)) { 1428 ENC_VLOG(enc, "Enclosure %d Beyond End of " 1429 "Descriptors\n", cur_subenc - subencs); 1430 err = EIO; 1431 goto out; 1432 } 1433 1434 ENC_VLOG(enc, " SubEnclosure ID %d, %d Types With this ID, " 1435 "Descriptor Length %d, offset %d\n", buf_subenc->subenc_id, 1436 buf_subenc->num_types, buf_subenc->length, 1437 &buf_subenc->byte0 - buf); 1438 ENC_VLOG(enc, "WWN: %jx\n", 1439 (uintmax_t)scsi_8btou64(buf_subenc->logical_id)); 1440 1441 ntype += buf_subenc->num_types; 1442 *cur_subenc = buf_subenc; 1443 cur_subenc++; 1444 buf_subenc = ses_enc_desc_next(buf_subenc); 1445 } 1446 1447 /* Process the type headers. */ 1448 ses_types = malloc(ntype * sizeof(*ses_types), 1449 M_SCSIENC, M_WAITOK|M_ZERO); 1450 /* 1451 * Type data is const after construction (i.e. when accessed via 1452 * our cache object. 1453 */ 1454 ses_cache->ses_ntypes = ntype; 1455 ses_cache->ses_types = ses_types; 1456 1457 cur_buf_type = (const struct ses_elm_type_desc *) 1458 (&(*last_subenc)->length + (*last_subenc)->length + 1); 1459 last_buf_type = cur_buf_type + ntype - 1; 1460 type_text = (const uint8_t *)(last_buf_type + 1); 1461 nelm = 0; 1462 sestype = ses_types; 1463 while (cur_buf_type <= last_buf_type) { 1464 if (&cur_buf_type->etype_txt_len > last_valid_byte) { 1465 ENC_VLOG(enc, "Runt Enclosure Type Header %d\n", 1466 sestype - ses_types); 1467 err = EIO; 1468 goto out; 1469 } 1470 sestype->hdr = cur_buf_type; 1471 sestype->text = type_text; 1472 type_text += cur_buf_type->etype_txt_len; 1473 ENC_VLOG(enc, " Type Desc[%d]: Type 0x%x, MaxElt %d, In Subenc " 1474 "%d, Text Length %d: %.*s\n", sestype - ses_types, 1475 sestype->hdr->etype_elm_type, sestype->hdr->etype_maxelt, 1476 sestype->hdr->etype_subenc, sestype->hdr->etype_txt_len, 1477 sestype->hdr->etype_txt_len, sestype->text); 1478 1479 nelm += sestype->hdr->etype_maxelt 1480 + /*overall status element*/1; 1481 sestype++; 1482 cur_buf_type++; 1483 } 1484 1485 /* Create the object map. */ 1486 enc_cache->elm_map = malloc(nelm * sizeof(enc_element_t), 1487 M_SCSIENC, M_WAITOK|M_ZERO); 1488 enc_cache->nelms = nelm; 1489 1490 ses_iter_init(enc, enc_cache, &iter); 1491 while ((element = ses_iter_next(&iter)) != NULL) { 1492 const struct ses_elm_type_desc *thdr; 1493 1494 ENC_DLOG(enc, "%s: checking obj %d(%d,%d)\n", __func__, 1495 iter.global_element_index, iter.type_index, nelm, 1496 iter.type_element_index); 1497 thdr = ses_cache->ses_types[iter.type_index].hdr; 1498 element->elm_idx = iter.global_element_index; 1499 element->elm_type = thdr->etype_elm_type; 1500 element->subenclosure = thdr->etype_subenc; 1501 element->type_elm_idx = iter.type_element_index; 1502 element->elm_private = malloc(sizeof(ses_element_t), 1503 M_SCSIENC, M_WAITOK|M_ZERO); 1504 ENC_DLOG(enc, "%s: creating elmpriv %d(%d,%d) subenc %d " 1505 "type 0x%x\n", __func__, iter.global_element_index, 1506 iter.type_index, iter.type_element_index, 1507 thdr->etype_subenc, thdr->etype_elm_type); 1508 } 1509 1510 err = 0; 1511 1512 out: 1513 if (err) 1514 ses_cache_free(enc, enc_cache); 1515 else { 1516 ses_poll_status(enc); 1517 enc_update_request(enc, SES_PUBLISH_CACHE); 1518 } 1519 ENC_DLOG(enc, "%s: exiting with err %d\n", __func__, err); 1520 return (err); 1521 } 1522 1523 /** 1524 * \brief Update the status page and associated structures. 1525 * 1526 * \param enc SES softc to update for. 1527 * \param buf Buffer containing the status page. 1528 * \param bufsz Amount of data in the buffer. 1529 * 1530 * \return 0 on success, errno otherwise. 1531 */ 1532 static int 1533 ses_process_status(enc_softc_t *enc, struct enc_fsm_state *state, 1534 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 1535 { 1536 struct ses_iterator iter; 1537 enc_element_t *element; 1538 ses_softc_t *ses; 1539 enc_cache_t *enc_cache; 1540 ses_cache_t *ses_cache; 1541 uint8_t *buf; 1542 int err = -1; 1543 int length; 1544 struct ses_status_page *page; 1545 union ses_status_element *cur_stat; 1546 union ses_status_element *last_stat; 1547 1548 ses = enc->enc_private; 1549 enc_cache = &enc->enc_daemon_cache; 1550 ses_cache = enc_cache->private; 1551 buf = *bufp; 1552 1553 ENC_DLOG(enc, "%s: enter (%p, %p, %d)\n", __func__, enc, buf, xfer_len); 1554 page = (struct ses_status_page *)buf; 1555 length = ses_page_length(&page->hdr); 1556 1557 if (error != 0) { 1558 err = error; 1559 goto out; 1560 } 1561 /* 1562 * Make sure the length fits in the buffer. 1563 * 1564 * XXX all this means is that the page is larger than the space 1565 * we allocated. Since we use a statically sized buffer, this 1566 * could happen... Need to use dynamic discovery of the size. 1567 */ 1568 if (length > xfer_len) { 1569 ENC_VLOG(enc, "Enclosure Status Page Too Long\n"); 1570 goto out; 1571 } 1572 1573 /* Check for simple enclosure reporting short enclosure status. */ 1574 if (length >= 4 && page->hdr.page_code == SesShortStatus) { 1575 ENC_DLOG(enc, "Got Short Enclosure Status page\n"); 1576 ses->ses_flags &= ~(SES_FLAG_ADDLSTATUS | SES_FLAG_DESC); 1577 ses_cache_free(enc, enc_cache); 1578 enc_cache->enc_status = page->hdr.page_specific_flags; 1579 enc_update_request(enc, SES_PUBLISH_CACHE); 1580 err = 0; 1581 goto out; 1582 } 1583 1584 /* Make sure the length contains at least one header and status */ 1585 if (length < (sizeof(*page) + sizeof(*page->elements))) { 1586 ENC_VLOG(enc, "Enclosure Status Page Too Short\n"); 1587 goto out; 1588 } 1589 1590 if (!ses_config_cache_valid(ses_cache, page->hdr.gen_code)) { 1591 ENC_DLOG(enc, "%s: Generation count change detected\n", 1592 __func__); 1593 enc_update_request(enc, SES_UPDATE_GETCONFIG); 1594 goto out; 1595 } 1596 1597 ses_cache_free_status(enc, enc_cache); 1598 ses_cache->status_page = page; 1599 *bufp = NULL; 1600 1601 enc_cache->enc_status = page->hdr.page_specific_flags; 1602 1603 /* 1604 * Read in individual element status. The element order 1605 * matches the order reported in the config page (i.e. the 1606 * order of an unfiltered iteration of the config objects).. 1607 */ 1608 ses_iter_init(enc, enc_cache, &iter); 1609 cur_stat = page->elements; 1610 last_stat = (union ses_status_element *) 1611 &buf[length - sizeof(*last_stat)]; 1612 ENC_DLOG(enc, "%s: total page length %d, xfer_len %d\n", 1613 __func__, length, xfer_len); 1614 while (cur_stat <= last_stat 1615 && (element = ses_iter_next(&iter)) != NULL) { 1616 ENC_DLOG(enc, "%s: obj %d(%d,%d) off=0x%tx status=%jx\n", 1617 __func__, iter.global_element_index, iter.type_index, 1618 iter.type_element_index, (uint8_t *)cur_stat - buf, 1619 scsi_4btoul(cur_stat->bytes)); 1620 1621 memcpy(&element->encstat, cur_stat, sizeof(element->encstat)); 1622 element->svalid = 1; 1623 cur_stat++; 1624 } 1625 1626 if (ses_iter_next(&iter) != NULL) { 1627 ENC_VLOG(enc, "Status page, length insufficient for " 1628 "expected number of objects\n"); 1629 } else { 1630 if (cur_stat <= last_stat) 1631 ENC_VLOG(enc, "Status page, exhausted objects before " 1632 "exhausing page\n"); 1633 enc_update_request(enc, SES_PUBLISH_CACHE); 1634 err = 0; 1635 } 1636 out: 1637 ENC_DLOG(enc, "%s: exiting with error %d\n", __func__, err); 1638 return (err); 1639 } 1640 1641 typedef enum { 1642 /** 1643 * The enclosure should not provide additional element 1644 * status for this element type in page 0x0A. 1645 * 1646 * \note This status is returned for any types not 1647 * listed SES3r02. Further types added in a 1648 * future specification will be incorrectly 1649 * classified. 1650 */ 1651 TYPE_ADDLSTATUS_NONE, 1652 1653 /** 1654 * The element type provides additional element status 1655 * in page 0x0A. 1656 */ 1657 TYPE_ADDLSTATUS_MANDATORY, 1658 1659 /** 1660 * The element type may provide additional element status 1661 * in page 0x0A, but i 1662 */ 1663 TYPE_ADDLSTATUS_OPTIONAL 1664 } ses_addlstatus_avail_t; 1665 1666 /** 1667 * \brief Check to see whether a given type (as obtained via type headers) is 1668 * supported by the additional status command. 1669 * 1670 * \param enc SES softc to check. 1671 * \param typidx Type index to check for. 1672 * 1673 * \return An enumeration indicating if additional status is mandatory, 1674 * optional, or not required for this type. 1675 */ 1676 static ses_addlstatus_avail_t 1677 ses_typehasaddlstatus(enc_softc_t *enc, uint8_t typidx) 1678 { 1679 enc_cache_t *enc_cache; 1680 ses_cache_t *ses_cache; 1681 1682 enc_cache = &enc->enc_daemon_cache; 1683 ses_cache = enc_cache->private; 1684 switch(ses_cache->ses_types[typidx].hdr->etype_elm_type) { 1685 case ELMTYP_DEVICE: 1686 case ELMTYP_ARRAY_DEV: 1687 case ELMTYP_SAS_EXP: 1688 return (TYPE_ADDLSTATUS_MANDATORY); 1689 case ELMTYP_SCSI_INI: 1690 case ELMTYP_SCSI_TGT: 1691 case ELMTYP_ESCC: 1692 return (TYPE_ADDLSTATUS_OPTIONAL); 1693 default: 1694 /* No additional status information available. */ 1695 break; 1696 } 1697 return (TYPE_ADDLSTATUS_NONE); 1698 } 1699 1700 static int ses_get_elm_addlstatus_fc(enc_softc_t *, enc_cache_t *, 1701 uint8_t *, int); 1702 static int ses_get_elm_addlstatus_sas(enc_softc_t *, enc_cache_t *, uint8_t *, 1703 int, int, int, int); 1704 static int ses_get_elm_addlstatus_ata(enc_softc_t *, enc_cache_t *, uint8_t *, 1705 int, int, int, int); 1706 1707 /** 1708 * \brief Parse the additional status element data for each object. 1709 * 1710 * \param enc The SES softc to update. 1711 * \param buf The buffer containing the additional status 1712 * element response. 1713 * \param xfer_len Size of the buffer. 1714 * 1715 * \return 0 on success, errno otherwise. 1716 */ 1717 static int 1718 ses_process_elm_addlstatus(enc_softc_t *enc, struct enc_fsm_state *state, 1719 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 1720 { 1721 struct ses_iterator iter, titer; 1722 int eip; 1723 int err; 1724 int length; 1725 int offset; 1726 enc_cache_t *enc_cache; 1727 ses_cache_t *ses_cache; 1728 uint8_t *buf; 1729 ses_element_t *elmpriv; 1730 const struct ses_page_hdr *hdr; 1731 enc_element_t *element, *telement; 1732 1733 enc_cache = &enc->enc_daemon_cache; 1734 ses_cache = enc_cache->private; 1735 buf = *bufp; 1736 err = -1; 1737 1738 if (error != 0) { 1739 err = error; 1740 goto out; 1741 } 1742 ses_cache_free_elm_addlstatus(enc, enc_cache); 1743 ses_cache->elm_addlstatus_page = 1744 (struct ses_addl_elem_status_page *)buf; 1745 *bufp = NULL; 1746 1747 /* 1748 * The objects appear in the same order here as in Enclosure Status, 1749 * which itself is ordered by the Type Descriptors from the Config 1750 * page. However, it is necessary to skip elements that are not 1751 * supported by this page when counting them. 1752 */ 1753 hdr = &ses_cache->elm_addlstatus_page->hdr; 1754 length = ses_page_length(hdr); 1755 ENC_DLOG(enc, "Additional Element Status Page Length 0x%x\n", length); 1756 /* Make sure the length includes at least one header. */ 1757 if (length < sizeof(*hdr)+sizeof(struct ses_elm_addlstatus_base_hdr)) { 1758 ENC_VLOG(enc, "Runt Additional Element Status Page\n"); 1759 goto out; 1760 } 1761 if (length > xfer_len) { 1762 ENC_VLOG(enc, "Additional Element Status Page Too Long\n"); 1763 goto out; 1764 } 1765 1766 if (!ses_config_cache_valid(ses_cache, hdr->gen_code)) { 1767 ENC_DLOG(enc, "%s: Generation count change detected\n", 1768 __func__); 1769 enc_update_request(enc, SES_UPDATE_GETCONFIG); 1770 goto out; 1771 } 1772 1773 offset = sizeof(struct ses_page_hdr); 1774 ses_iter_init(enc, enc_cache, &iter); 1775 while (offset < length 1776 && (element = ses_iter_next(&iter)) != NULL) { 1777 struct ses_elm_addlstatus_base_hdr *elm_hdr; 1778 int proto_info_len; 1779 ses_addlstatus_avail_t status_type; 1780 1781 /* 1782 * Additional element status is only provided for 1783 * individual elements (i.e. overal status elements 1784 * are excluded) and those of the types specified 1785 * in the SES spec. 1786 */ 1787 status_type = ses_typehasaddlstatus(enc, iter.type_index); 1788 if (iter.individual_element_index == ITERATOR_INDEX_INVALID 1789 || status_type == TYPE_ADDLSTATUS_NONE) 1790 continue; 1791 1792 elm_hdr = (struct ses_elm_addlstatus_base_hdr *)&buf[offset]; 1793 eip = ses_elm_addlstatus_eip(elm_hdr); 1794 if (eip) { 1795 struct ses_elm_addlstatus_eip_hdr *eip_hdr; 1796 int expected_index, index; 1797 ses_elem_index_type_t index_type; 1798 1799 eip_hdr = (struct ses_elm_addlstatus_eip_hdr *)elm_hdr; 1800 if (SES_ADDL_EIP_EIIOE_EI_GLOB(eip_hdr->byte2)) { 1801 index_type = SES_ELEM_INDEX_GLOBAL; 1802 expected_index = iter.global_element_index; 1803 } else { 1804 index_type = SES_ELEM_INDEX_INDIVIDUAL; 1805 expected_index = iter.individual_element_index; 1806 } 1807 if (eip_hdr->element_index < expected_index) { 1808 ENC_VLOG(enc, "%s: provided %selement index " 1809 "%d is lower then expected %d\n", 1810 __func__, SES_ADDL_EIP_EIIOE_EI_GLOB( 1811 eip_hdr->byte2) ? "global " : "", 1812 eip_hdr->element_index, expected_index); 1813 goto badindex; 1814 } 1815 titer = iter; 1816 telement = ses_iter_seek_to(&titer, 1817 eip_hdr->element_index, index_type); 1818 if (telement == NULL) { 1819 ENC_VLOG(enc, "%s: provided %selement index " 1820 "%d does not exist\n", __func__, 1821 SES_ADDL_EIP_EIIOE_EI_GLOB(eip_hdr->byte2) ? 1822 "global " : "", eip_hdr->element_index); 1823 goto badindex; 1824 } 1825 if (ses_typehasaddlstatus(enc, titer.type_index) == 1826 TYPE_ADDLSTATUS_NONE) { 1827 ENC_VLOG(enc, "%s: provided %selement index " 1828 "%d can't have additional status\n", 1829 __func__, 1830 SES_ADDL_EIP_EIIOE_EI_GLOB(eip_hdr->byte2) ? 1831 "global " : "", eip_hdr->element_index); 1832 badindex: 1833 /* 1834 * If we expected mandatory element, we may 1835 * guess it was just a wrong index and we may 1836 * use the status. If element was optional, 1837 * then we have no idea where status belongs. 1838 */ 1839 if (status_type == TYPE_ADDLSTATUS_OPTIONAL) 1840 break; 1841 } else { 1842 iter = titer; 1843 element = telement; 1844 } 1845 1846 if (SES_ADDL_EIP_EIIOE_EI_GLOB(eip_hdr->byte2)) 1847 index = iter.global_element_index; 1848 else 1849 index = iter.individual_element_index; 1850 if (index > expected_index 1851 && status_type == TYPE_ADDLSTATUS_MANDATORY) { 1852 ENC_VLOG(enc, "%s: provided %s element" 1853 "index %d skips mandatory status " 1854 " element at index %d\n", 1855 __func__, SES_ADDL_EIP_EIIOE_EI_GLOB( 1856 eip_hdr->byte2) ? "global " : "", 1857 index, expected_index); 1858 } 1859 } 1860 elmpriv = element->elm_private; 1861 ENC_DLOG(enc, "%s: global element index=%d, type index=%d " 1862 "type element index=%d, offset=0x%x, " 1863 "byte0=0x%x, length=0x%x\n", __func__, 1864 iter.global_element_index, iter.type_index, 1865 iter.type_element_index, offset, elm_hdr->byte0, 1866 elm_hdr->length); 1867 1868 /* Skip to after the length field */ 1869 offset += sizeof(struct ses_elm_addlstatus_base_hdr); 1870 1871 /* Make sure the descriptor is within bounds */ 1872 if ((offset + elm_hdr->length) > length) { 1873 ENC_VLOG(enc, "Element %d Beyond End " 1874 "of Additional Element Status Descriptors\n", 1875 iter.global_element_index); 1876 break; 1877 } 1878 1879 /* Skip elements marked as invalid. */ 1880 if (ses_elm_addlstatus_invalid(elm_hdr)) { 1881 offset += elm_hdr->length; 1882 continue; 1883 } 1884 elmpriv->addl.hdr = elm_hdr; 1885 1886 /* Advance to the protocol data, skipping eip bytes if needed */ 1887 offset += (eip * SES_EIP_HDR_EXTRA_LEN); 1888 proto_info_len = elm_hdr->length 1889 - (eip * SES_EIP_HDR_EXTRA_LEN); 1890 1891 /* Errors in this block are ignored as they are non-fatal */ 1892 switch(ses_elm_addlstatus_proto(elm_hdr)) { 1893 case SPSP_PROTO_FC: 1894 if (elm_hdr->length == 0) 1895 break; 1896 ses_get_elm_addlstatus_fc(enc, enc_cache, 1897 &buf[offset], proto_info_len); 1898 break; 1899 case SPSP_PROTO_SAS: 1900 if (elm_hdr->length <= 2) 1901 break; 1902 ses_get_elm_addlstatus_sas(enc, enc_cache, 1903 &buf[offset], 1904 proto_info_len, 1905 eip, iter.type_index, 1906 iter.global_element_index); 1907 break; 1908 case SPSP_PROTO_ATA: 1909 ses_get_elm_addlstatus_ata(enc, enc_cache, 1910 &buf[offset], 1911 proto_info_len, 1912 eip, iter.type_index, 1913 iter.global_element_index); 1914 break; 1915 default: 1916 ENC_VLOG(enc, "Element %d: Unknown Additional Element " 1917 "Protocol 0x%x\n", iter.global_element_index, 1918 ses_elm_addlstatus_proto(elm_hdr)); 1919 break; 1920 } 1921 1922 offset += proto_info_len; 1923 } 1924 err = 0; 1925 out: 1926 if (err) 1927 ses_cache_free_elm_addlstatus(enc, enc_cache); 1928 enc_update_request(enc, SES_PUBLISH_PHYSPATHS); 1929 enc_update_request(enc, SES_PUBLISH_CACHE); 1930 return (err); 1931 } 1932 1933 static int 1934 ses_process_control_request(enc_softc_t *enc, struct enc_fsm_state *state, 1935 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 1936 { 1937 ses_softc_t *ses; 1938 1939 ses = enc->enc_private; 1940 /* 1941 * Possible errors: 1942 * o Generation count wrong. 1943 * o Some SCSI status error. 1944 */ 1945 ses_terminate_control_requests(&ses->ses_pending_requests, error); 1946 ses_poll_status(enc); 1947 return (0); 1948 } 1949 1950 static int 1951 ses_publish_physpaths(enc_softc_t *enc, struct enc_fsm_state *state, 1952 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 1953 { 1954 struct ses_iterator iter; 1955 enc_cache_t *enc_cache; 1956 enc_element_t *element; 1957 1958 enc_cache = &enc->enc_daemon_cache; 1959 1960 ses_iter_init(enc, enc_cache, &iter); 1961 while ((element = ses_iter_next(&iter)) != NULL) { 1962 /* 1963 * ses_set_physpath() returns success if we changed 1964 * the physpath of any element. This allows us to 1965 * only announce devices once regardless of how 1966 * many times we process additional element status. 1967 */ 1968 if (ses_set_physpath(enc, element, &iter) == 0) 1969 ses_print_addl_data(enc, element); 1970 } 1971 1972 return (0); 1973 } 1974 1975 static int 1976 ses_publish_cache(enc_softc_t *enc, struct enc_fsm_state *state, 1977 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 1978 { 1979 1980 sx_xlock(&enc->enc_cache_lock); 1981 ses_cache_clone(enc, /*src*/&enc->enc_daemon_cache, 1982 /*dst*/&enc->enc_cache); 1983 sx_xunlock(&enc->enc_cache_lock); 1984 1985 return (0); 1986 } 1987 1988 /* 1989 * \brief Sanitize an element descriptor 1990 * 1991 * The SES4r3 standard, sections 3.1.2 and 6.1.10, specifies that element 1992 * descriptors may only contain ASCII characters in the range 0x20 to 0x7e. 1993 * But some vendors violate that rule. Ensure that we only expose compliant 1994 * descriptors to userland. 1995 * 1996 * \param desc SES element descriptor as reported by the hardware 1997 * \param len Length of desc in bytes, not necessarily including 1998 * trailing NUL. It will be modified if desc is invalid. 1999 */ 2000 static const char* 2001 ses_sanitize_elm_desc(const char *desc, uint16_t *len) 2002 { 2003 const char *invalid = "<invalid>"; 2004 int i; 2005 2006 for (i = 0; i < *len; i++) { 2007 if (desc[i] == 0) { 2008 break; 2009 } else if (desc[i] < 0x20 || desc[i] > 0x7e) { 2010 *len = strlen(invalid); 2011 return (invalid); 2012 } 2013 } 2014 return (desc); 2015 } 2016 2017 /** 2018 * \brief Parse the descriptors for each object. 2019 * 2020 * \param enc The SES softc to update. 2021 * \param buf The buffer containing the descriptor list response. 2022 * \param xfer_len Size of the buffer. 2023 * 2024 * \return 0 on success, errno otherwise. 2025 */ 2026 static int 2027 ses_process_elm_descs(enc_softc_t *enc, struct enc_fsm_state *state, 2028 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 2029 { 2030 ses_softc_t *ses; 2031 struct ses_iterator iter; 2032 enc_element_t *element; 2033 int err; 2034 int offset; 2035 u_long length, plength; 2036 enc_cache_t *enc_cache; 2037 ses_cache_t *ses_cache; 2038 uint8_t *buf; 2039 ses_element_t *elmpriv; 2040 const struct ses_page_hdr *phdr; 2041 const struct ses_elm_desc_hdr *hdr; 2042 2043 ses = enc->enc_private; 2044 enc_cache = &enc->enc_daemon_cache; 2045 ses_cache = enc_cache->private; 2046 buf = *bufp; 2047 err = -1; 2048 2049 if (error != 0) { 2050 err = error; 2051 goto out; 2052 } 2053 ses_cache_free_elm_descs(enc, enc_cache); 2054 ses_cache->elm_descs_page = (struct ses_elem_descr_page *)buf; 2055 *bufp = NULL; 2056 2057 phdr = &ses_cache->elm_descs_page->hdr; 2058 plength = ses_page_length(phdr); 2059 if (xfer_len < sizeof(struct ses_page_hdr)) { 2060 ENC_VLOG(enc, "Runt Element Descriptor Page\n"); 2061 goto out; 2062 } 2063 if (plength > xfer_len) { 2064 ENC_VLOG(enc, "Element Descriptor Page Too Long\n"); 2065 goto out; 2066 } 2067 2068 if (!ses_config_cache_valid(ses_cache, phdr->gen_code)) { 2069 ENC_VLOG(enc, "%s: Generation count change detected\n", 2070 __func__); 2071 enc_update_request(enc, SES_UPDATE_GETCONFIG); 2072 goto out; 2073 } 2074 2075 offset = sizeof(struct ses_page_hdr); 2076 2077 ses_iter_init(enc, enc_cache, &iter); 2078 while (offset < plength 2079 && (element = ses_iter_next(&iter)) != NULL) { 2080 if ((offset + sizeof(struct ses_elm_desc_hdr)) > plength) { 2081 ENC_VLOG(enc, "Element %d Descriptor Header Past " 2082 "End of Buffer\n", iter.global_element_index); 2083 goto out; 2084 } 2085 hdr = (struct ses_elm_desc_hdr *)&buf[offset]; 2086 length = scsi_2btoul(hdr->length); 2087 ENC_DLOG(enc, "%s: obj %d(%d,%d) length=%d off=%d\n", __func__, 2088 iter.global_element_index, iter.type_index, 2089 iter.type_element_index, length, offset); 2090 if ((offset + sizeof(*hdr) + length) > plength) { 2091 ENC_VLOG(enc, "Element%d Descriptor Past " 2092 "End of Buffer\n", iter.global_element_index); 2093 goto out; 2094 } 2095 offset += sizeof(*hdr); 2096 2097 if (length > 0) { 2098 elmpriv = element->elm_private; 2099 elmpriv->descr_len = length; 2100 elmpriv->descr = ses_sanitize_elm_desc(&buf[offset], 2101 &elmpriv->descr_len); 2102 } 2103 2104 /* skip over the descriptor itself */ 2105 offset += length; 2106 } 2107 2108 err = 0; 2109 out: 2110 if (err == 0) { 2111 if (ses->ses_flags & SES_FLAG_ADDLSTATUS) 2112 enc_update_request(enc, SES_UPDATE_GETELMADDLSTATUS); 2113 } 2114 enc_update_request(enc, SES_PUBLISH_CACHE); 2115 return (err); 2116 } 2117 2118 static int 2119 ses_fill_rcv_diag_io(enc_softc_t *enc, struct enc_fsm_state *state, 2120 union ccb *ccb, uint8_t *buf) 2121 { 2122 2123 if (enc->enc_type == ENC_SEMB_SES) { 2124 semb_receive_diagnostic_results(&ccb->ataio, /*retries*/5, 2125 NULL, MSG_SIMPLE_Q_TAG, /*pcv*/1, 2126 state->page_code, buf, state->buf_size, 2127 state->timeout); 2128 } else { 2129 scsi_receive_diagnostic_results(&ccb->csio, /*retries*/5, 2130 NULL, MSG_SIMPLE_Q_TAG, /*pcv*/1, 2131 state->page_code, buf, state->buf_size, 2132 SSD_FULL_SIZE, state->timeout); 2133 } 2134 return (0); 2135 } 2136 2137 /** 2138 * \brief Encode the object status into the response buffer, which is 2139 * expected to contain the current enclosure status. This function 2140 * turns off all the 'select' bits for the objects except for the 2141 * object specified, then sends it back to the enclosure. 2142 * 2143 * \param enc SES enclosure the change is being applied to. 2144 * \param buf Buffer containing the current enclosure status response. 2145 * \param amt Length of the response in the buffer. 2146 * \param req The control request to be applied to buf. 2147 * 2148 * \return 0 on success, errno otherwise. 2149 */ 2150 static int 2151 ses_encode(enc_softc_t *enc, uint8_t *buf, int amt, ses_control_request_t *req) 2152 { 2153 struct ses_iterator iter; 2154 enc_element_t *element; 2155 int offset; 2156 struct ses_control_page_hdr *hdr; 2157 2158 ses_iter_init(enc, &enc->enc_cache, &iter); 2159 hdr = (struct ses_control_page_hdr *)buf; 2160 if (req->elm_idx == -1) { 2161 /* for enclosure status, at least 2 bytes are needed */ 2162 if (amt < 2) 2163 return EIO; 2164 hdr->control_flags = 2165 req->elm_stat.comstatus & SES_SET_STATUS_MASK; 2166 ENC_DLOG(enc, "Set EncStat %x\n", hdr->control_flags); 2167 return (0); 2168 } 2169 2170 element = ses_iter_seek_to(&iter, req->elm_idx, SES_ELEM_INDEX_GLOBAL); 2171 if (element == NULL) 2172 return (ENXIO); 2173 2174 /* 2175 * Seek to the type set that corresponds to the requested object. 2176 * The +1 is for the overall status element for the type. 2177 */ 2178 offset = sizeof(struct ses_control_page_hdr) 2179 + (iter.global_element_index * sizeof(struct ses_comstat)); 2180 2181 /* Check for buffer overflow. */ 2182 if (offset + sizeof(struct ses_comstat) > amt) 2183 return (EIO); 2184 2185 /* Set the status. */ 2186 memcpy(&buf[offset], &req->elm_stat, sizeof(struct ses_comstat)); 2187 2188 ENC_DLOG(enc, "Set Type 0x%x Obj 0x%x (offset %d) with %x %x %x %x\n", 2189 iter.type_index, iter.global_element_index, offset, 2190 req->elm_stat.comstatus, req->elm_stat.comstat[0], 2191 req->elm_stat.comstat[1], req->elm_stat.comstat[2]); 2192 2193 return (0); 2194 } 2195 2196 static int 2197 ses_fill_control_request(enc_softc_t *enc, struct enc_fsm_state *state, 2198 union ccb *ccb, uint8_t *buf) 2199 { 2200 ses_softc_t *ses; 2201 enc_cache_t *enc_cache; 2202 ses_cache_t *ses_cache; 2203 struct ses_control_page_hdr *hdr; 2204 ses_control_request_t *req; 2205 size_t plength; 2206 size_t offset; 2207 2208 ses = enc->enc_private; 2209 enc_cache = &enc->enc_daemon_cache; 2210 ses_cache = enc_cache->private; 2211 hdr = (struct ses_control_page_hdr *)buf; 2212 2213 if (ses_cache->status_page == NULL) { 2214 ses_terminate_control_requests(&ses->ses_requests, EIO); 2215 return (EIO); 2216 } 2217 2218 plength = ses_page_length(&ses_cache->status_page->hdr); 2219 memcpy(buf, ses_cache->status_page, plength); 2220 2221 /* Disable the select bits in all status entries. */ 2222 offset = sizeof(struct ses_control_page_hdr); 2223 for (offset = sizeof(struct ses_control_page_hdr); 2224 offset < plength; offset += sizeof(struct ses_comstat)) { 2225 buf[offset] &= ~SESCTL_CSEL; 2226 } 2227 2228 /* And make sure the INVOP bit is clear. */ 2229 hdr->control_flags &= ~SES_ENCSTAT_INVOP; 2230 2231 /* Apply incoming requests. */ 2232 while ((req = TAILQ_FIRST(&ses->ses_requests)) != NULL) { 2233 TAILQ_REMOVE(&ses->ses_requests, req, links); 2234 req->result = ses_encode(enc, buf, plength, req); 2235 if (req->result != 0) { 2236 wakeup(req); 2237 continue; 2238 } 2239 TAILQ_INSERT_TAIL(&ses->ses_pending_requests, req, links); 2240 } 2241 2242 if (TAILQ_EMPTY(&ses->ses_pending_requests) != 0) 2243 return (ENOENT); 2244 2245 /* Fill out the ccb */ 2246 if (enc->enc_type == ENC_SEMB_SES) { 2247 semb_send_diagnostic(&ccb->ataio, /*retries*/5, NULL, 2248 MSG_SIMPLE_Q_TAG, 2249 buf, ses_page_length(&ses_cache->status_page->hdr), 2250 state->timeout); 2251 } else { 2252 scsi_send_diagnostic(&ccb->csio, /*retries*/5, NULL, 2253 MSG_SIMPLE_Q_TAG, /*unit_offline*/0, 2254 /*device_offline*/0, /*self_test*/0, 2255 /*page_format*/1, /*self_test_code*/0, 2256 buf, ses_page_length(&ses_cache->status_page->hdr), 2257 SSD_FULL_SIZE, state->timeout); 2258 } 2259 return (0); 2260 } 2261 2262 static int 2263 ses_get_elm_addlstatus_fc(enc_softc_t *enc, enc_cache_t *enc_cache, 2264 uint8_t *buf, int bufsiz) 2265 { 2266 ENC_VLOG(enc, "FC Device Support Stubbed in Additional Status Page\n"); 2267 return (ENODEV); 2268 } 2269 2270 #define SES_PRINT_PORTS(p, type) do { \ 2271 if (((p) & SES_SASOBJ_DEV_PHY_PROTOMASK) != 0) { \ 2272 sbuf_printf(sbp, " %s (", type); \ 2273 if ((p) & SES_SASOBJ_DEV_PHY_SMP) \ 2274 sbuf_printf(sbp, " SMP"); \ 2275 if ((p) & SES_SASOBJ_DEV_PHY_STP) \ 2276 sbuf_printf(sbp, " STP"); \ 2277 if ((p) & SES_SASOBJ_DEV_PHY_SSP) \ 2278 sbuf_printf(sbp, " SSP"); \ 2279 sbuf_printf(sbp, " )"); \ 2280 } \ 2281 } while(0) 2282 2283 /** 2284 * \brief Print the additional element status data for this object, for SAS 2285 * type 0 objects. See SES2 r20 Section 6.1.13.3.2. 2286 * 2287 * \param sesname SES device name associated with the object. 2288 * \param sbp Sbuf to print to. 2289 * \param obj The object to print the data for. 2290 */ 2291 static void 2292 ses_print_addl_data_sas_type0(char *sesname, struct sbuf *sbp, 2293 enc_element_t *obj) 2294 { 2295 int i; 2296 ses_element_t *elmpriv; 2297 struct ses_addl_status *addl; 2298 struct ses_elm_sas_device_phy *phy; 2299 2300 elmpriv = obj->elm_private; 2301 addl = &(elmpriv->addl); 2302 sbuf_printf(sbp, ", SAS Slot: %d%s phys", 2303 addl->proto_hdr.sas->base_hdr.num_phys, 2304 ses_elm_sas_type0_not_all_phys(addl->proto_hdr.sas) ? "+" : ""); 2305 if (ses_elm_addlstatus_eip(addl->hdr)) 2306 sbuf_printf(sbp, " at slot %d", 2307 addl->proto_hdr.sas->type0_eip.dev_slot_num); 2308 sbuf_printf(sbp, "\n"); 2309 if (addl->proto_data.sasdev_phys == NULL) 2310 return; 2311 for (i = 0;i < addl->proto_hdr.sas->base_hdr.num_phys;i++) { 2312 phy = &addl->proto_data.sasdev_phys[i]; 2313 sbuf_printf(sbp, "%s: phy %d:", sesname, i); 2314 if (ses_elm_sas_dev_phy_sata_dev(phy)) 2315 /* Spec says all other fields are specific values */ 2316 sbuf_printf(sbp, " SATA device\n"); 2317 else { 2318 sbuf_printf(sbp, " SAS device type %d phy %d", 2319 ses_elm_sas_dev_phy_dev_type(phy), phy->phy_id); 2320 SES_PRINT_PORTS(phy->initiator_ports, "Initiator"); 2321 SES_PRINT_PORTS(phy->target_ports, "Target"); 2322 sbuf_printf(sbp, "\n"); 2323 } 2324 sbuf_printf(sbp, "%s: phy %d: parent %jx addr %jx\n", 2325 sesname, i, 2326 (uintmax_t)scsi_8btou64(phy->parent_addr), 2327 (uintmax_t)scsi_8btou64(phy->phy_addr)); 2328 } 2329 } 2330 #undef SES_PRINT_PORTS 2331 2332 /** 2333 * \brief Print the additional element status data for this object, for SAS 2334 * type 1 objects. See SES2 r20 Sections 6.1.13.3.3 and 6.1.13.3.4. 2335 * 2336 * \param sesname SES device name associated with the object. 2337 * \param sbp Sbuf to print to. 2338 * \param obj The object to print the data for. 2339 */ 2340 static void 2341 ses_print_addl_data_sas_type1(char *sesname, struct sbuf *sbp, 2342 enc_element_t *obj) 2343 { 2344 int i, num_phys; 2345 ses_element_t *elmpriv; 2346 struct ses_addl_status *addl; 2347 struct ses_elm_sas_expander_phy *exp_phy; 2348 struct ses_elm_sas_port_phy *port_phy; 2349 2350 elmpriv = obj->elm_private; 2351 addl = &(elmpriv->addl); 2352 sbuf_printf(sbp, ", SAS "); 2353 if (obj->elm_type == ELMTYP_SAS_EXP) { 2354 num_phys = addl->proto_hdr.sas->base_hdr.num_phys; 2355 sbuf_printf(sbp, "Expander: %d phys", num_phys); 2356 if (addl->proto_data.sasexp_phys == NULL) 2357 return; 2358 for (i = 0;i < num_phys;i++) { 2359 exp_phy = &addl->proto_data.sasexp_phys[i]; 2360 sbuf_printf(sbp, "%s: phy %d: connector %d other %d\n", 2361 sesname, i, exp_phy->connector_index, 2362 exp_phy->other_index); 2363 } 2364 } else { 2365 num_phys = addl->proto_hdr.sas->base_hdr.num_phys; 2366 sbuf_printf(sbp, "Port: %d phys", num_phys); 2367 if (addl->proto_data.sasport_phys == NULL) 2368 return; 2369 for (i = 0;i < num_phys;i++) { 2370 port_phy = &addl->proto_data.sasport_phys[i]; 2371 sbuf_printf(sbp, 2372 "%s: phy %d: id %d connector %d other %d\n", 2373 sesname, i, port_phy->phy_id, 2374 port_phy->connector_index, port_phy->other_index); 2375 sbuf_printf(sbp, "%s: phy %d: addr %jx\n", sesname, i, 2376 (uintmax_t)scsi_8btou64(port_phy->phy_addr)); 2377 } 2378 } 2379 } 2380 2381 /** 2382 * \brief Print the additional element status data for this object, for 2383 * ATA objects. 2384 * 2385 * \param sbp Sbuf to print to. 2386 * \param obj The object to print the data for. 2387 */ 2388 static void 2389 ses_print_addl_data_ata(struct sbuf *sbp, enc_element_t *obj) 2390 { 2391 ses_element_t *elmpriv = obj->elm_private; 2392 struct ses_addl_status *addl = &elmpriv->addl; 2393 struct ses_elm_ata_hdr *ata = addl->proto_hdr.ata; 2394 2395 sbuf_printf(sbp, ", SATA Slot: scbus%d target %d\n", 2396 scsi_4btoul(ata->bus), scsi_4btoul(ata->target)); 2397 } 2398 2399 /** 2400 * \brief Print the additional element status data for this object. 2401 * 2402 * \param enc SES softc associated with the object. 2403 * \param obj The object to print the data for. 2404 */ 2405 static void 2406 ses_print_addl_data(enc_softc_t *enc, enc_element_t *obj) 2407 { 2408 ses_element_t *elmpriv; 2409 struct ses_addl_status *addl; 2410 struct sbuf sesname, name, out; 2411 2412 elmpriv = obj->elm_private; 2413 if (elmpriv == NULL) 2414 return; 2415 2416 addl = &(elmpriv->addl); 2417 if (addl->hdr == NULL) 2418 return; 2419 2420 sbuf_new(&sesname, NULL, 16, SBUF_AUTOEXTEND); 2421 sbuf_new(&name, NULL, 16, SBUF_AUTOEXTEND); 2422 sbuf_new(&out, NULL, 512, SBUF_AUTOEXTEND); 2423 ses_paths_iter(enc, obj, ses_elmdevname_callback, &name); 2424 if (sbuf_len(&name) == 0) 2425 sbuf_printf(&name, "(none)"); 2426 sbuf_finish(&name); 2427 sbuf_printf(&sesname, "%s%d", enc->periph->periph_name, 2428 enc->periph->unit_number); 2429 sbuf_finish(&sesname); 2430 sbuf_printf(&out, "%s: %s in ", sbuf_data(&sesname), sbuf_data(&name)); 2431 if (elmpriv->descr != NULL) 2432 sbuf_printf(&out, "'%s'", elmpriv->descr); 2433 else { 2434 if (obj->elm_type <= ELMTYP_LAST) 2435 sbuf_cat(&out, elm_type_names[obj->elm_type]); 2436 else 2437 sbuf_printf(&out, "<Type 0x%02x>", obj->elm_type); 2438 sbuf_printf(&out, " %d", obj->type_elm_idx); 2439 if (obj->subenclosure != 0) 2440 sbuf_printf(&out, " of subenc %d", obj->subenclosure); 2441 } 2442 switch(ses_elm_addlstatus_proto(addl->hdr)) { 2443 case SPSP_PROTO_FC: 2444 goto noaddl; /* stubbed for now */ 2445 case SPSP_PROTO_SAS: 2446 if (addl->proto_hdr.sas == NULL) 2447 goto noaddl; 2448 switch(ses_elm_sas_descr_type(addl->proto_hdr.sas)) { 2449 case SES_SASOBJ_TYPE_SLOT: 2450 ses_print_addl_data_sas_type0(sbuf_data(&sesname), 2451 &out, obj); 2452 break; 2453 case SES_SASOBJ_TYPE_OTHER: 2454 ses_print_addl_data_sas_type1(sbuf_data(&sesname), 2455 &out, obj); 2456 break; 2457 default: 2458 goto noaddl; 2459 } 2460 break; 2461 case SPSP_PROTO_ATA: 2462 if (addl->proto_hdr.ata == NULL) 2463 goto noaddl; 2464 ses_print_addl_data_ata(&out, obj); 2465 break; 2466 default: 2467 noaddl: 2468 sbuf_cat(&out, "\n"); 2469 break; 2470 } 2471 sbuf_finish(&out); 2472 printf("%s", sbuf_data(&out)); 2473 sbuf_delete(&out); 2474 sbuf_delete(&name); 2475 sbuf_delete(&sesname); 2476 } 2477 2478 /** 2479 * \brief Update the softc with the additional element status data for this 2480 * object, for SAS type 0 objects. 2481 * 2482 * \param enc SES softc to be updated. 2483 * \param buf The additional element status response buffer. 2484 * \param bufsiz Size of the response buffer. 2485 * \param eip The EIP bit value. 2486 * \param nobj Number of objects attached to the SES softc. 2487 * 2488 * \return 0 on success, errno otherwise. 2489 */ 2490 static int 2491 ses_get_elm_addlstatus_sas_type0(enc_softc_t *enc, enc_cache_t *enc_cache, 2492 uint8_t *buf, int bufsiz, int eip, int nobj) 2493 { 2494 int err, offset, physz; 2495 enc_element_t *obj; 2496 ses_element_t *elmpriv; 2497 struct ses_addl_status *addl; 2498 2499 err = offset = 0; 2500 2501 /* basic object setup */ 2502 obj = &(enc_cache->elm_map[nobj]); 2503 elmpriv = obj->elm_private; 2504 addl = &(elmpriv->addl); 2505 2506 addl->proto_hdr.sas = (union ses_elm_sas_hdr *)&buf[offset]; 2507 2508 /* Don't assume this object has any phys */ 2509 bzero(&addl->proto_data, sizeof(addl->proto_data)); 2510 if (addl->proto_hdr.sas->base_hdr.num_phys == 0) 2511 goto out; 2512 2513 /* Skip forward to the phy list */ 2514 if (eip) 2515 offset += sizeof(struct ses_elm_sas_type0_eip_hdr); 2516 else 2517 offset += sizeof(struct ses_elm_sas_type0_base_hdr); 2518 2519 /* Make sure the phy list fits in the buffer */ 2520 physz = addl->proto_hdr.sas->base_hdr.num_phys; 2521 physz *= sizeof(struct ses_elm_sas_device_phy); 2522 if (physz > (bufsiz - offset + 4)) { 2523 ENC_VLOG(enc, "Element %d Device Phy List Beyond End Of Buffer\n", 2524 nobj); 2525 err = EIO; 2526 goto out; 2527 } 2528 2529 /* Point to the phy list */ 2530 addl->proto_data.sasdev_phys = 2531 (struct ses_elm_sas_device_phy *)&buf[offset]; 2532 2533 out: 2534 return (err); 2535 } 2536 2537 /** 2538 * \brief Update the softc with the additional element status data for this 2539 * object, for SAS type 1 objects. 2540 * 2541 * \param enc SES softc to be updated. 2542 * \param buf The additional element status response buffer. 2543 * \param bufsiz Size of the response buffer. 2544 * \param eip The EIP bit value. 2545 * \param nobj Number of objects attached to the SES softc. 2546 * 2547 * \return 0 on success, errno otherwise. 2548 */ 2549 static int 2550 ses_get_elm_addlstatus_sas_type1(enc_softc_t *enc, enc_cache_t *enc_cache, 2551 uint8_t *buf, int bufsiz, int eip, int nobj) 2552 { 2553 int err, offset, physz; 2554 enc_element_t *obj; 2555 ses_element_t *elmpriv; 2556 struct ses_addl_status *addl; 2557 2558 err = offset = 0; 2559 2560 /* basic object setup */ 2561 obj = &(enc_cache->elm_map[nobj]); 2562 elmpriv = obj->elm_private; 2563 addl = &(elmpriv->addl); 2564 2565 addl->proto_hdr.sas = (union ses_elm_sas_hdr *)&buf[offset]; 2566 2567 /* Don't assume this object has any phys */ 2568 bzero(&addl->proto_data, sizeof(addl->proto_data)); 2569 if (addl->proto_hdr.sas->base_hdr.num_phys == 0) 2570 goto out; 2571 2572 /* Process expanders differently from other type1 cases */ 2573 if (obj->elm_type == ELMTYP_SAS_EXP) { 2574 offset += sizeof(struct ses_elm_sas_type1_expander_hdr); 2575 physz = addl->proto_hdr.sas->base_hdr.num_phys * 2576 sizeof(struct ses_elm_sas_expander_phy); 2577 if (physz > (bufsiz - offset)) { 2578 ENC_VLOG(enc, "Element %d: Expander Phy List Beyond " 2579 "End Of Buffer\n", nobj); 2580 err = EIO; 2581 goto out; 2582 } 2583 addl->proto_data.sasexp_phys = 2584 (struct ses_elm_sas_expander_phy *)&buf[offset]; 2585 } else { 2586 offset += sizeof(struct ses_elm_sas_type1_nonexpander_hdr); 2587 physz = addl->proto_hdr.sas->base_hdr.num_phys * 2588 sizeof(struct ses_elm_sas_port_phy); 2589 if (physz > (bufsiz - offset + 4)) { 2590 ENC_VLOG(enc, "Element %d: Port Phy List Beyond End " 2591 "Of Buffer\n", nobj); 2592 err = EIO; 2593 goto out; 2594 } 2595 addl->proto_data.sasport_phys = 2596 (struct ses_elm_sas_port_phy *)&buf[offset]; 2597 } 2598 2599 out: 2600 return (err); 2601 } 2602 2603 /** 2604 * \brief Update the softc with the additional element status data for this 2605 * object, for SAS objects. 2606 * 2607 * \param enc SES softc to be updated. 2608 * \param buf The additional element status response buffer. 2609 * \param bufsiz Size of the response buffer. 2610 * \param eip The EIP bit value. 2611 * \param tidx Type index for this object. 2612 * \param nobj Number of objects attached to the SES softc. 2613 * 2614 * \return 0 on success, errno otherwise. 2615 */ 2616 static int 2617 ses_get_elm_addlstatus_sas(enc_softc_t *enc, enc_cache_t *enc_cache, 2618 uint8_t *buf, int bufsiz, int eip, int tidx, 2619 int nobj) 2620 { 2621 int dtype, err; 2622 ses_cache_t *ses_cache; 2623 union ses_elm_sas_hdr *hdr; 2624 2625 /* Need to be able to read the descriptor type! */ 2626 if (bufsiz < sizeof(union ses_elm_sas_hdr)) { 2627 err = EIO; 2628 goto out; 2629 } 2630 2631 ses_cache = enc_cache->private; 2632 2633 hdr = (union ses_elm_sas_hdr *)buf; 2634 dtype = ses_elm_sas_descr_type(hdr); 2635 switch(dtype) { 2636 case SES_SASOBJ_TYPE_SLOT: 2637 switch(ses_cache->ses_types[tidx].hdr->etype_elm_type) { 2638 case ELMTYP_DEVICE: 2639 case ELMTYP_ARRAY_DEV: 2640 break; 2641 default: 2642 ENC_VLOG(enc, "Element %d has Additional Status type 0, " 2643 "invalid for SES element type 0x%x\n", nobj, 2644 ses_cache->ses_types[tidx].hdr->etype_elm_type); 2645 err = ENODEV; 2646 goto out; 2647 } 2648 err = ses_get_elm_addlstatus_sas_type0(enc, enc_cache, 2649 buf, bufsiz, eip, 2650 nobj); 2651 break; 2652 case SES_SASOBJ_TYPE_OTHER: 2653 switch(ses_cache->ses_types[tidx].hdr->etype_elm_type) { 2654 case ELMTYP_SAS_EXP: 2655 case ELMTYP_SCSI_INI: 2656 case ELMTYP_SCSI_TGT: 2657 case ELMTYP_ESCC: 2658 break; 2659 default: 2660 ENC_VLOG(enc, "Element %d has Additional Status type 1, " 2661 "invalid for SES element type 0x%x\n", nobj, 2662 ses_cache->ses_types[tidx].hdr->etype_elm_type); 2663 err = ENODEV; 2664 goto out; 2665 } 2666 err = ses_get_elm_addlstatus_sas_type1(enc, enc_cache, buf, 2667 bufsiz, eip, nobj); 2668 break; 2669 default: 2670 ENC_VLOG(enc, "Element %d of type 0x%x has Additional Status " 2671 "of unknown type 0x%x\n", nobj, 2672 ses_cache->ses_types[tidx].hdr->etype_elm_type, dtype); 2673 err = ENODEV; 2674 break; 2675 } 2676 2677 out: 2678 return (err); 2679 } 2680 2681 /** 2682 * \brief Update the softc with the additional element status data for this 2683 * object, for ATA objects. 2684 * 2685 * \param enc SES softc to be updated. 2686 * \param buf The additional element status response buffer. 2687 * \param bufsiz Size of the response buffer. 2688 * \param eip The EIP bit value. 2689 * \param tidx Type index for this object. 2690 * \param nobj Number of objects attached to the SES softc. 2691 * 2692 * \return 0 on success, errno otherwise. 2693 */ 2694 static int 2695 ses_get_elm_addlstatus_ata(enc_softc_t *enc, enc_cache_t *enc_cache, 2696 uint8_t *buf, int bufsiz, int eip, int tidx, 2697 int nobj) 2698 { 2699 int err; 2700 ses_cache_t *ses_cache; 2701 2702 if (bufsiz < sizeof(struct ses_elm_ata_hdr)) { 2703 err = EIO; 2704 goto out; 2705 } 2706 2707 ses_cache = enc_cache->private; 2708 switch(ses_cache->ses_types[tidx].hdr->etype_elm_type) { 2709 case ELMTYP_DEVICE: 2710 case ELMTYP_ARRAY_DEV: 2711 break; 2712 default: 2713 ENC_VLOG(enc, "Element %d has Additional Status, " 2714 "invalid for SES element type 0x%x\n", nobj, 2715 ses_cache->ses_types[tidx].hdr->etype_elm_type); 2716 err = ENODEV; 2717 goto out; 2718 } 2719 2720 ((ses_element_t *)enc_cache->elm_map[nobj].elm_private) 2721 ->addl.proto_hdr.ata = (struct ses_elm_ata_hdr *)buf; 2722 err = 0; 2723 2724 out: 2725 return (err); 2726 } 2727 2728 static void 2729 ses_softc_invalidate(enc_softc_t *enc) 2730 { 2731 ses_softc_t *ses; 2732 2733 ses = enc->enc_private; 2734 ses_terminate_control_requests(&ses->ses_requests, ENXIO); 2735 } 2736 2737 static void 2738 ses_softc_cleanup(enc_softc_t *enc) 2739 { 2740 2741 ses_cache_free(enc, &enc->enc_cache); 2742 ses_cache_free(enc, &enc->enc_daemon_cache); 2743 ENC_FREE_AND_NULL(enc->enc_private); 2744 ENC_FREE_AND_NULL(enc->enc_cache.private); 2745 ENC_FREE_AND_NULL(enc->enc_daemon_cache.private); 2746 } 2747 2748 static int 2749 ses_init_enc(enc_softc_t *enc) 2750 { 2751 return (0); 2752 } 2753 2754 static int 2755 ses_set_enc_status(enc_softc_t *enc, uint8_t encstat, int slpflag) 2756 { 2757 ses_control_request_t req; 2758 ses_softc_t *ses; 2759 2760 ses = enc->enc_private; 2761 req.elm_idx = SES_SETSTATUS_ENC_IDX; 2762 req.elm_stat.comstatus = encstat & 0xf; 2763 2764 TAILQ_INSERT_TAIL(&ses->ses_requests, &req, links); 2765 enc_update_request(enc, SES_PROCESS_CONTROL_REQS); 2766 cam_periph_sleep(enc->periph, &req, PUSER, "encstat", 0); 2767 2768 return (req.result); 2769 } 2770 2771 static int 2772 ses_get_elm_status(enc_softc_t *enc, encioc_elm_status_t *elms, int slpflag) 2773 { 2774 unsigned int i = elms->elm_idx; 2775 2776 memcpy(elms->cstat, &enc->enc_cache.elm_map[i].encstat, 4); 2777 return (0); 2778 } 2779 2780 static int 2781 ses_set_elm_status(enc_softc_t *enc, encioc_elm_status_t *elms, int slpflag) 2782 { 2783 ses_control_request_t req; 2784 ses_softc_t *ses; 2785 2786 /* If this is clear, we don't do diddly. */ 2787 if ((elms->cstat[0] & SESCTL_CSEL) == 0) 2788 return (0); 2789 2790 ses = enc->enc_private; 2791 req.elm_idx = elms->elm_idx; 2792 memcpy(&req.elm_stat, elms->cstat, sizeof(req.elm_stat)); 2793 2794 TAILQ_INSERT_TAIL(&ses->ses_requests, &req, links); 2795 enc_update_request(enc, SES_PROCESS_CONTROL_REQS); 2796 cam_periph_sleep(enc->periph, &req, PUSER, "encstat", 0); 2797 2798 return (req.result); 2799 } 2800 2801 static int 2802 ses_get_elm_desc(enc_softc_t *enc, encioc_elm_desc_t *elmd) 2803 { 2804 int i = (int)elmd->elm_idx; 2805 ses_element_t *elmpriv; 2806 2807 /* Assume caller has already checked obj_id validity */ 2808 elmpriv = enc->enc_cache.elm_map[i].elm_private; 2809 /* object might not have a descriptor */ 2810 if (elmpriv == NULL || elmpriv->descr == NULL) { 2811 elmd->elm_desc_len = 0; 2812 return (0); 2813 } 2814 if (elmd->elm_desc_len > elmpriv->descr_len) 2815 elmd->elm_desc_len = elmpriv->descr_len; 2816 copyout(elmpriv->descr, elmd->elm_desc_str, elmd->elm_desc_len); 2817 return (0); 2818 } 2819 2820 /** 2821 * \brief Respond to ENCIOC_GETELMDEVNAME, providing a device name for the 2822 * given object id if one is available. 2823 * 2824 * \param enc SES softc to examine. 2825 * \param objdn ioctl structure to read/write device name info. 2826 * 2827 * \return 0 on success, errno otherwise. 2828 */ 2829 static int 2830 ses_get_elm_devnames(enc_softc_t *enc, encioc_elm_devnames_t *elmdn) 2831 { 2832 struct sbuf sb; 2833 int len; 2834 2835 len = elmdn->elm_names_size; 2836 if (len < 0) 2837 return (EINVAL); 2838 2839 cam_periph_unlock(enc->periph); 2840 sbuf_new(&sb, NULL, len, SBUF_FIXEDLEN); 2841 ses_paths_iter(enc, &enc->enc_cache.elm_map[elmdn->elm_idx], 2842 ses_elmdevname_callback, &sb); 2843 sbuf_finish(&sb); 2844 elmdn->elm_names_len = sbuf_len(&sb); 2845 copyout(sbuf_data(&sb), elmdn->elm_devnames, elmdn->elm_names_len + 1); 2846 sbuf_delete(&sb); 2847 cam_periph_lock(enc->periph); 2848 return (elmdn->elm_names_len > 0 ? 0 : ENODEV); 2849 } 2850 2851 /** 2852 * \brief Send a string to the primary subenclosure using the String Out 2853 * SES diagnostic page. 2854 * 2855 * \param enc SES enclosure to run the command on. 2856 * \param sstr SES string structure to operate on 2857 * \param ioc Ioctl being performed 2858 * 2859 * \return 0 on success, errno otherwise. 2860 */ 2861 static int 2862 ses_handle_string(enc_softc_t *enc, encioc_string_t *sstr, unsigned long ioc) 2863 { 2864 enc_cache_t *enc_cache; 2865 ses_cache_t *ses_cache; 2866 const struct ses_enc_desc *enc_desc; 2867 int amt, payload, ret; 2868 char cdb[6]; 2869 char str[32]; 2870 char vendor[9]; 2871 char product[17]; 2872 char rev[5]; 2873 uint8_t *buf; 2874 size_t size, rsize; 2875 2876 enc_cache = &enc->enc_daemon_cache; 2877 ses_cache = enc_cache->private; 2878 2879 /* Implement SES2r20 6.1.6 */ 2880 if (sstr->bufsiz > ENC_STRING_MAX) 2881 return (EINVAL); /* buffer size too large */ 2882 2883 switch (ioc) { 2884 case ENCIOC_SETSTRING: 2885 payload = sstr->bufsiz + 4; /* header for SEND DIAGNOSTIC */ 2886 amt = 0 - payload; 2887 buf = ENC_MALLOC(payload); 2888 if (buf == NULL) 2889 return (ENOMEM); 2890 ses_page_cdb(cdb, payload, 0, CAM_DIR_OUT); 2891 /* Construct the page request */ 2892 buf[0] = SesStringOut; 2893 buf[1] = 0; 2894 buf[2] = sstr->bufsiz >> 8; 2895 buf[3] = sstr->bufsiz & 0xff; 2896 ret = copyin(sstr->buf, &buf[4], sstr->bufsiz); 2897 if (ret != 0) { 2898 ENC_FREE(buf); 2899 return (ret); 2900 } 2901 break; 2902 case ENCIOC_GETSTRING: 2903 payload = sstr->bufsiz; 2904 amt = payload; 2905 buf = ENC_MALLOC(payload); 2906 if (buf == NULL) 2907 return (ENOMEM); 2908 ses_page_cdb(cdb, payload, SesStringIn, CAM_DIR_IN); 2909 break; 2910 case ENCIOC_GETENCNAME: 2911 if (ses_cache->ses_nsubencs < 1) 2912 return (ENODEV); 2913 enc_desc = ses_cache->subencs[0]; 2914 cam_strvis(vendor, enc_desc->vendor_id, 2915 sizeof(enc_desc->vendor_id), sizeof(vendor)); 2916 cam_strvis(product, enc_desc->product_id, 2917 sizeof(enc_desc->product_id), sizeof(product)); 2918 cam_strvis(rev, enc_desc->product_rev, 2919 sizeof(enc_desc->product_rev), sizeof(rev)); 2920 rsize = snprintf(str, sizeof(str), "%s %s %s", 2921 vendor, product, rev) + 1; 2922 if (rsize > sizeof(str)) 2923 rsize = sizeof(str); 2924 size = rsize; 2925 if (size > sstr->bufsiz) 2926 size = sstr->bufsiz; 2927 copyout(str, sstr->buf, size); 2928 sstr->bufsiz = rsize; 2929 return (size == rsize ? 0 : ENOMEM); 2930 case ENCIOC_GETENCID: 2931 if (ses_cache->ses_nsubencs < 1) 2932 return (ENODEV); 2933 enc_desc = ses_cache->subencs[0]; 2934 rsize = snprintf(str, sizeof(str), "%16jx", 2935 scsi_8btou64(enc_desc->logical_id)) + 1; 2936 if (rsize > sizeof(str)) 2937 rsize = sizeof(str); 2938 size = rsize; 2939 if (size > sstr->bufsiz) 2940 size = sstr->bufsiz; 2941 copyout(str, sstr->buf, size); 2942 sstr->bufsiz = rsize; 2943 return (size == rsize ? 0 : ENOMEM); 2944 default: 2945 return (EINVAL); 2946 } 2947 ret = enc_runcmd(enc, cdb, 6, buf, &amt); 2948 if (ret == 0 && ioc == ENCIOC_GETSTRING) 2949 ret = copyout(buf, sstr->buf, sstr->bufsiz); 2950 if (ioc == ENCIOC_SETSTRING || ioc == ENCIOC_GETSTRING) 2951 ENC_FREE(buf); 2952 return (ret); 2953 } 2954 2955 /** 2956 * \invariant Called with cam_periph mutex held. 2957 */ 2958 static void 2959 ses_poll_status(enc_softc_t *enc) 2960 { 2961 ses_softc_t *ses; 2962 2963 ses = enc->enc_private; 2964 enc_update_request(enc, SES_UPDATE_GETSTATUS); 2965 if (ses->ses_flags & SES_FLAG_DESC) 2966 enc_update_request(enc, SES_UPDATE_GETELMDESCS); 2967 if (ses->ses_flags & SES_FLAG_ADDLSTATUS) 2968 enc_update_request(enc, SES_UPDATE_GETELMADDLSTATUS); 2969 } 2970 2971 /** 2972 * \brief Notification received when CAM detects a new device in the 2973 * SCSI domain in which this SEP resides. 2974 * 2975 * \param enc SES enclosure instance. 2976 */ 2977 static void 2978 ses_device_found(enc_softc_t *enc) 2979 { 2980 ses_poll_status(enc); 2981 enc_update_request(enc, SES_PUBLISH_PHYSPATHS); 2982 } 2983 2984 static struct enc_vec ses_enc_vec = 2985 { 2986 .softc_invalidate = ses_softc_invalidate, 2987 .softc_cleanup = ses_softc_cleanup, 2988 .init_enc = ses_init_enc, 2989 .set_enc_status = ses_set_enc_status, 2990 .get_elm_status = ses_get_elm_status, 2991 .set_elm_status = ses_set_elm_status, 2992 .get_elm_desc = ses_get_elm_desc, 2993 .get_elm_devnames = ses_get_elm_devnames, 2994 .handle_string = ses_handle_string, 2995 .device_found = ses_device_found, 2996 .poll_status = ses_poll_status 2997 }; 2998 2999 /** 3000 * \brief Initialize a new SES instance. 3001 * 3002 * \param enc SES softc structure to set up the instance in. 3003 * \param doinit Do the initialization (see main driver). 3004 * 3005 * \return 0 on success, errno otherwise. 3006 */ 3007 int 3008 ses_softc_init(enc_softc_t *enc) 3009 { 3010 ses_softc_t *ses_softc; 3011 3012 CAM_DEBUG(enc->periph->path, CAM_DEBUG_SUBTRACE, 3013 ("entering enc_softc_init(%p)\n", enc)); 3014 3015 enc->enc_vec = ses_enc_vec; 3016 enc->enc_fsm_states = enc_fsm_states; 3017 3018 if (enc->enc_private == NULL) 3019 enc->enc_private = ENC_MALLOCZ(sizeof(ses_softc_t)); 3020 if (enc->enc_cache.private == NULL) 3021 enc->enc_cache.private = ENC_MALLOCZ(sizeof(ses_cache_t)); 3022 if (enc->enc_daemon_cache.private == NULL) 3023 enc->enc_daemon_cache.private = 3024 ENC_MALLOCZ(sizeof(ses_cache_t)); 3025 3026 if (enc->enc_private == NULL 3027 || enc->enc_cache.private == NULL 3028 || enc->enc_daemon_cache.private == NULL) { 3029 ENC_FREE_AND_NULL(enc->enc_private); 3030 ENC_FREE_AND_NULL(enc->enc_cache.private); 3031 ENC_FREE_AND_NULL(enc->enc_daemon_cache.private); 3032 return (ENOMEM); 3033 } 3034 3035 ses_softc = enc->enc_private; 3036 TAILQ_INIT(&ses_softc->ses_requests); 3037 TAILQ_INIT(&ses_softc->ses_pending_requests); 3038 3039 enc_update_request(enc, SES_UPDATE_PAGES); 3040 3041 // XXX: Move this to the FSM so it doesn't hang init 3042 if (0) (void) ses_set_timed_completion(enc, 1); 3043 3044 return (0); 3045 } 3046