1 /*- 2 * Copyright (c) 2000 Matthew Jacob 3 * Copyright (c) 2010 Spectra Logic Corporation 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions, and the following disclaimer, 11 * without modification, immediately at the beginning of the file. 12 * 2. The name of the author may not be used to endorse or promote products 13 * derived from this software without specific prior written permission. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 19 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 */ 27 28 /** 29 * \file scsi_enc_ses.c 30 * 31 * Structures and routines specific && private to SES only 32 */ 33 34 #include <sys/cdefs.h> 35 __FBSDID("$FreeBSD$"); 36 37 #include <sys/param.h> 38 39 #include <sys/ctype.h> 40 #include <sys/errno.h> 41 #include <sys/kernel.h> 42 #include <sys/lock.h> 43 #include <sys/malloc.h> 44 #include <sys/mutex.h> 45 #include <sys/queue.h> 46 #include <sys/sbuf.h> 47 #include <sys/sx.h> 48 #include <sys/systm.h> 49 #include <sys/types.h> 50 51 #include <cam/cam.h> 52 #include <cam/cam_ccb.h> 53 #include <cam/cam_xpt_periph.h> 54 #include <cam/cam_periph.h> 55 56 #include <cam/scsi/scsi_message.h> 57 #include <cam/scsi/scsi_enc.h> 58 #include <cam/scsi/scsi_enc_internal.h> 59 60 /* SES Native Type Device Support */ 61 62 /* SES Diagnostic Page Codes */ 63 typedef enum { 64 SesSupportedPages = 0x0, 65 SesConfigPage = 0x1, 66 SesControlPage = 0x2, 67 SesStatusPage = SesControlPage, 68 SesHelpTxt = 0x3, 69 SesStringOut = 0x4, 70 SesStringIn = SesStringOut, 71 SesThresholdOut = 0x5, 72 SesThresholdIn = SesThresholdOut, 73 SesArrayControl = 0x6, /* Obsolete in SES v2 */ 74 SesArrayStatus = SesArrayControl, 75 SesElementDescriptor = 0x7, 76 SesShortStatus = 0x8, 77 SesEnclosureBusy = 0x9, 78 SesAddlElementStatus = 0xa 79 } SesDiagPageCodes; 80 81 typedef struct ses_type { 82 const struct ses_elm_type_desc *hdr; 83 const char *text; 84 } ses_type_t; 85 86 typedef struct ses_comstat { 87 uint8_t comstatus; 88 uint8_t comstat[3]; 89 } ses_comstat_t; 90 91 typedef union ses_addl_data { 92 struct ses_elm_sas_device_phy *sasdev_phys; 93 struct ses_elm_sas_expander_phy *sasexp_phys; 94 struct ses_elm_sas_port_phy *sasport_phys; 95 struct ses_fcobj_port *fc_ports; 96 } ses_add_data_t; 97 98 typedef struct ses_addl_status { 99 struct ses_elm_addlstatus_base_hdr *hdr; 100 union { 101 union ses_fcobj_hdr *fc; 102 union ses_elm_sas_hdr *sas; 103 } proto_hdr; 104 union ses_addl_data proto_data; /* array sizes stored in header */ 105 } ses_add_status_t; 106 107 typedef struct ses_element { 108 uint8_t eip; /* eip bit is set */ 109 uint16_t descr_len; /* length of the descriptor */ 110 char *descr; /* descriptor for this object */ 111 struct ses_addl_status addl; /* additional status info */ 112 } ses_element_t; 113 114 typedef struct ses_control_request { 115 int elm_idx; 116 ses_comstat_t elm_stat; 117 int result; 118 TAILQ_ENTRY(ses_control_request) links; 119 } ses_control_request_t; 120 TAILQ_HEAD(ses_control_reqlist, ses_control_request); 121 typedef struct ses_control_reqlist ses_control_reqlist_t; 122 enum { 123 SES_SETSTATUS_ENC_IDX = -1 124 }; 125 126 static void 127 ses_terminate_control_requests(ses_control_reqlist_t *reqlist, int result) 128 { 129 ses_control_request_t *req; 130 131 while ((req = TAILQ_FIRST(reqlist)) != NULL) { 132 TAILQ_REMOVE(reqlist, req, links); 133 req->result = result; 134 wakeup(req); 135 } 136 } 137 138 enum ses_iter_index_values { 139 /** 140 * \brief Value of an initialized but invalid index 141 * in a ses_iterator object. 142 * 143 * This value is used for the individual_element_index of 144 * overal status elements and for all index types when 145 * an iterator is first initialized. 146 */ 147 ITERATOR_INDEX_INVALID = -1, 148 149 /** 150 * \brief Value of an index in a ses_iterator object 151 * when the iterator has traversed past the last 152 * valid element.. 153 */ 154 ITERATOR_INDEX_END = INT_MAX 155 }; 156 157 /** 158 * \brief Structure encapsulating all data necessary to traverse the 159 * elements of a SES configuration. 160 * 161 * The ses_iterator object simplifies the task of iterating through all 162 * elements detected via the SES configuration page by tracking the numerous 163 * element indexes that, instead of memoizing in the softc, we calculate 164 * on the fly during the traversal of the element objects. The various 165 * indexes are necessary due to the varying needs of matching objects in 166 * the different SES pages. Some pages (e.g. Status/Control) contain all 167 * elements, while others (e.g. Additional Element Status) only contain 168 * individual elements (no overal status elements) of particular types. 169 * 170 * To use an iterator, initialize it with ses_iter_init(), and then 171 * use ses_iter_next() to traverse the elements (including the first) in 172 * the configuration. Once an iterator is initiailized with ses_iter_init(), 173 * you may also seek to any particular element by either it's global or 174 * individual element index via the ses_iter_seek_to() function. You may 175 * also return an iterator to the position just before the first element 176 * (i.e. the same state as after an ses_iter_init()), with ses_iter_reset(). 177 */ 178 struct ses_iterator { 179 /** 180 * \brief Backlink to the overal software configuration structure. 181 * 182 * This is included for convenience so the iteration functions 183 * need only take a single, struct ses_iterator *, argument. 184 */ 185 enc_softc_t *enc; 186 187 enc_cache_t *cache; 188 189 /** 190 * \brief Index of the type of the current element within the 191 * ses_cache's ses_types array. 192 */ 193 int type_index; 194 195 /** 196 * \brief The position (0 based) of this element relative to all other 197 * elements of this type. 198 * 199 * This index resets to zero every time the iterator transitions 200 * to elements of a new type in the configuration. 201 */ 202 int type_element_index; 203 204 /** 205 * \brief The position (0 based) of this element relative to all 206 * other individual status elements in the configuration. 207 * 208 * This index ranges from 0 through the number of individual 209 * elements in the configuration. When the iterator returns 210 * an overall status element, individual_element_index is 211 * set to ITERATOR_INDEX_INVALID, to indicate that it does 212 * not apply to the current element. 213 */ 214 int individual_element_index; 215 216 /** 217 * \brief The position (0 based) of this element relative to 218 * all elements in the configration. 219 * 220 * This index is appropriate for indexing into enc->ses_elm_map. 221 */ 222 int global_element_index; 223 224 /** 225 * \brief The last valid individual element index of this 226 * iterator. 227 * 228 * When an iterator traverses an overal status element, the 229 * individual element index is reset to ITERATOR_INDEX_INVALID 230 * to prevent unintential use of the individual_element_index 231 * field. The saved_individual_element_index allows the iterator 232 * to restore it's position in the individual elements upon 233 * reaching the next individual element. 234 */ 235 int saved_individual_element_index; 236 }; 237 238 typedef enum { 239 SES_UPDATE_NONE, 240 SES_UPDATE_PAGES, 241 SES_UPDATE_GETCONFIG, 242 SES_UPDATE_GETSTATUS, 243 SES_UPDATE_GETELMDESCS, 244 SES_UPDATE_GETELMADDLSTATUS, 245 SES_PROCESS_CONTROL_REQS, 246 SES_PUBLISH_PHYSPATHS, 247 SES_PUBLISH_CACHE, 248 SES_NUM_UPDATE_STATES 249 } ses_update_action; 250 251 static enc_softc_cleanup_t ses_softc_cleanup; 252 253 #define SCSZ 0x8000 254 255 static fsm_fill_handler_t ses_fill_rcv_diag_io; 256 static fsm_fill_handler_t ses_fill_control_request; 257 static fsm_done_handler_t ses_process_pages; 258 static fsm_done_handler_t ses_process_config; 259 static fsm_done_handler_t ses_process_status; 260 static fsm_done_handler_t ses_process_elm_descs; 261 static fsm_done_handler_t ses_process_elm_addlstatus; 262 static fsm_done_handler_t ses_process_control_request; 263 static fsm_done_handler_t ses_publish_physpaths; 264 static fsm_done_handler_t ses_publish_cache; 265 266 static struct enc_fsm_state enc_fsm_states[SES_NUM_UPDATE_STATES] = 267 { 268 { "SES_UPDATE_NONE", 0, 0, 0, NULL, NULL, NULL }, 269 { 270 "SES_UPDATE_PAGES", 271 SesSupportedPages, 272 SCSZ, 273 60 * 1000, 274 ses_fill_rcv_diag_io, 275 ses_process_pages, 276 enc_error 277 }, 278 { 279 "SES_UPDATE_GETCONFIG", 280 SesConfigPage, 281 SCSZ, 282 60 * 1000, 283 ses_fill_rcv_diag_io, 284 ses_process_config, 285 enc_error 286 }, 287 { 288 "SES_UPDATE_GETSTATUS", 289 SesStatusPage, 290 SCSZ, 291 60 * 1000, 292 ses_fill_rcv_diag_io, 293 ses_process_status, 294 enc_error 295 }, 296 { 297 "SES_UPDATE_GETELMDESCS", 298 SesElementDescriptor, 299 SCSZ, 300 60 * 1000, 301 ses_fill_rcv_diag_io, 302 ses_process_elm_descs, 303 enc_error 304 }, 305 { 306 "SES_UPDATE_GETELMADDLSTATUS", 307 SesAddlElementStatus, 308 SCSZ, 309 60 * 1000, 310 ses_fill_rcv_diag_io, 311 ses_process_elm_addlstatus, 312 enc_error 313 }, 314 { 315 "SES_PROCESS_CONTROL_REQS", 316 SesControlPage, 317 SCSZ, 318 60 * 1000, 319 ses_fill_control_request, 320 ses_process_control_request, 321 enc_error 322 }, 323 { 324 "SES_PUBLISH_PHYSPATHS", 325 0, 326 0, 327 0, 328 NULL, 329 ses_publish_physpaths, 330 NULL 331 }, 332 { 333 "SES_PUBLISH_CACHE", 334 0, 335 0, 336 0, 337 NULL, 338 ses_publish_cache, 339 NULL 340 } 341 }; 342 343 typedef struct ses_cache { 344 /* Source for all the configuration data pointers */ 345 const struct ses_cfg_page *cfg_page; 346 347 /* References into the config page. */ 348 int ses_nsubencs; 349 const struct ses_enc_desc * const *subencs; 350 int ses_ntypes; 351 const ses_type_t *ses_types; 352 353 /* Source for all the status pointers */ 354 const struct ses_status_page *status_page; 355 356 /* Source for all the object descriptor pointers */ 357 const struct ses_elem_descr_page *elm_descs_page; 358 359 /* Source for all the additional object status pointers */ 360 const struct ses_addl_elem_status_page *elm_addlstatus_page; 361 362 } ses_cache_t; 363 364 typedef struct ses_softc { 365 uint32_t ses_flags; 366 #define SES_FLAG_TIMEDCOMP 0x01 367 #define SES_FLAG_ADDLSTATUS 0x02 368 #define SES_FLAG_DESC 0x04 369 370 ses_control_reqlist_t ses_requests; 371 ses_control_reqlist_t ses_pending_requests; 372 } ses_softc_t; 373 374 /** 375 * \brief Reset a SES iterator to just before the first element 376 * in the configuration. 377 * 378 * \param iter The iterator object to reset. 379 * 380 * The indexes within a reset iterator are invalid and will only 381 * become valid upon completion of a ses_iter_seek_to() or a 382 * ses_iter_next(). 383 */ 384 static void 385 ses_iter_reset(struct ses_iterator *iter) 386 { 387 /* 388 * Set our indexes to just before the first valid element 389 * of the first type (ITERATOR_INDEX_INVALID == -1). This 390 * simplifies the implementation of ses_iter_next(). 391 */ 392 iter->type_index = 0; 393 iter->type_element_index = ITERATOR_INDEX_INVALID; 394 iter->global_element_index = ITERATOR_INDEX_INVALID; 395 iter->individual_element_index = ITERATOR_INDEX_INVALID; 396 iter->saved_individual_element_index = ITERATOR_INDEX_INVALID; 397 } 398 399 /** 400 * \brief Initialize the storage of a SES iterator and reset it to 401 * the position just before the first element of the 402 * configuration. 403 * 404 * \param enc The SES softc for the SES instance whose configuration 405 * will be enumerated by this iterator. 406 * \param iter The iterator object to initialize. 407 */ 408 static void 409 ses_iter_init(enc_softc_t *enc, enc_cache_t *cache, struct ses_iterator *iter) 410 { 411 iter->enc = enc; 412 iter->cache = cache; 413 ses_iter_reset(iter); 414 } 415 416 /** 417 * \brief Traverse the provided SES iterator to the next element 418 * within the configuraiton. 419 * 420 * \param iter The iterator to move. 421 * 422 * \return If a valid next element exists, a pointer to it's enc_element_t. 423 * Otherwise NULL. 424 */ 425 static enc_element_t * 426 ses_iter_next(struct ses_iterator *iter) 427 { 428 ses_cache_t *ses_cache; 429 const ses_type_t *element_type; 430 431 ses_cache = iter->cache->private; 432 433 /* 434 * Note: Treat nelms as signed, so we will hit this case 435 * and immediately terminate the iteration if the 436 * configuration has 0 objects. 437 */ 438 if (iter->global_element_index >= (int)iter->cache->nelms - 1) { 439 440 /* Elements exhausted. */ 441 iter->type_index = ITERATOR_INDEX_END; 442 iter->type_element_index = ITERATOR_INDEX_END; 443 iter->global_element_index = ITERATOR_INDEX_END; 444 iter->individual_element_index = ITERATOR_INDEX_END; 445 return (NULL); 446 } 447 448 KASSERT((iter->type_index < ses_cache->ses_ntypes), 449 ("Corrupted element iterator. %d not less than %d", 450 iter->type_index, ses_cache->ses_ntypes)); 451 452 element_type = &ses_cache->ses_types[iter->type_index]; 453 iter->global_element_index++; 454 iter->type_element_index++; 455 456 /* 457 * There is an object for overal type status in addition 458 * to one for each allowed element, but only if the element 459 * count is non-zero. 460 */ 461 if (iter->type_element_index > element_type->hdr->etype_maxelt) { 462 463 /* 464 * We've exhausted the elements of this type. 465 * This next element belongs to the next type. 466 */ 467 iter->type_index++; 468 iter->type_element_index = 0; 469 iter->saved_individual_element_index 470 = iter->individual_element_index; 471 iter->individual_element_index = ITERATOR_INDEX_INVALID; 472 } 473 474 if (iter->type_element_index > 0) { 475 if (iter->type_element_index == 1) { 476 iter->individual_element_index 477 = iter->saved_individual_element_index; 478 } 479 iter->individual_element_index++; 480 } 481 482 return (&iter->cache->elm_map[iter->global_element_index]); 483 } 484 485 /** 486 * Element index types tracked by a SES iterator. 487 */ 488 typedef enum { 489 /** 490 * Index relative to all elements (overall and individual) 491 * in the system. 492 */ 493 SES_ELEM_INDEX_GLOBAL, 494 495 /** 496 * \brief Index relative to all individual elements in the system. 497 * 498 * This index counts only individual elements, skipping overall 499 * status elements. This is the index space of the additional 500 * element status page (page 0xa). 501 */ 502 SES_ELEM_INDEX_INDIVIDUAL 503 } ses_elem_index_type_t; 504 505 /** 506 * \brief Move the provided iterator forwards or backwards to the object 507 * having the give index. 508 * 509 * \param iter The iterator on which to perform the seek. 510 * \param element_index The index of the element to find. 511 * \param index_type The type (global or individual) of element_index. 512 * 513 * \return If the element is found, a pointer to it's enc_element_t. 514 * Otherwise NULL. 515 */ 516 static enc_element_t * 517 ses_iter_seek_to(struct ses_iterator *iter, int element_index, 518 ses_elem_index_type_t index_type) 519 { 520 enc_element_t *element; 521 int *cur_index; 522 523 if (index_type == SES_ELEM_INDEX_GLOBAL) 524 cur_index = &iter->global_element_index; 525 else 526 cur_index = &iter->individual_element_index; 527 528 if (*cur_index == element_index) { 529 /* Already there. */ 530 return (&iter->cache->elm_map[iter->global_element_index]); 531 } 532 533 ses_iter_reset(iter); 534 while ((element = ses_iter_next(iter)) != NULL 535 && *cur_index != element_index) 536 ; 537 538 if (*cur_index != element_index) 539 return (NULL); 540 541 return (element); 542 } 543 544 #if 0 545 static int ses_encode(enc_softc_t *, uint8_t *, int, int, 546 struct ses_comstat *); 547 #endif 548 static int ses_set_timed_completion(enc_softc_t *, uint8_t); 549 #if 0 550 static int ses_putstatus(enc_softc_t *, int, struct ses_comstat *); 551 #endif 552 553 static void ses_poll_status(enc_softc_t *); 554 static void ses_print_addl_data(enc_softc_t *, enc_element_t *); 555 556 /*=========================== SES cleanup routines ===========================*/ 557 558 static void 559 ses_cache_free_elm_addlstatus(enc_softc_t *enc, enc_cache_t *cache) 560 { 561 ses_cache_t *ses_cache; 562 ses_cache_t *other_ses_cache; 563 enc_element_t *cur_elm; 564 enc_element_t *last_elm; 565 566 ENC_DLOG(enc, "%s: enter\n", __func__); 567 ses_cache = cache->private; 568 if (ses_cache->elm_addlstatus_page == NULL) 569 return; 570 571 for (cur_elm = cache->elm_map, 572 last_elm = &cache->elm_map[cache->nelms]; 573 cur_elm != last_elm; cur_elm++) { 574 ses_element_t *elmpriv; 575 576 elmpriv = cur_elm->elm_private; 577 578 /* Clear references to the additional status page. */ 579 bzero(&elmpriv->addl, sizeof(elmpriv->addl)); 580 } 581 582 other_ses_cache = enc_other_cache(enc, cache)->private; 583 if (other_ses_cache->elm_addlstatus_page 584 != ses_cache->elm_addlstatus_page) 585 ENC_FREE(ses_cache->elm_addlstatus_page); 586 ses_cache->elm_addlstatus_page = NULL; 587 } 588 589 static void 590 ses_cache_free_elm_descs(enc_softc_t *enc, enc_cache_t *cache) 591 { 592 ses_cache_t *ses_cache; 593 ses_cache_t *other_ses_cache; 594 enc_element_t *cur_elm; 595 enc_element_t *last_elm; 596 597 ENC_DLOG(enc, "%s: enter\n", __func__); 598 ses_cache = cache->private; 599 if (ses_cache->elm_descs_page == NULL) 600 return; 601 602 for (cur_elm = cache->elm_map, 603 last_elm = &cache->elm_map[cache->nelms]; 604 cur_elm != last_elm; cur_elm++) { 605 ses_element_t *elmpriv; 606 607 elmpriv = cur_elm->elm_private; 608 elmpriv->descr_len = 0; 609 elmpriv->descr = NULL; 610 } 611 612 other_ses_cache = enc_other_cache(enc, cache)->private; 613 if (other_ses_cache->elm_descs_page 614 != ses_cache->elm_descs_page) 615 ENC_FREE(ses_cache->elm_descs_page); 616 ses_cache->elm_descs_page = NULL; 617 } 618 619 static void 620 ses_cache_free_status(enc_softc_t *enc, enc_cache_t *cache) 621 { 622 ses_cache_t *ses_cache; 623 ses_cache_t *other_ses_cache; 624 625 ENC_DLOG(enc, "%s: enter\n", __func__); 626 ses_cache = cache->private; 627 if (ses_cache->status_page == NULL) 628 return; 629 630 other_ses_cache = enc_other_cache(enc, cache)->private; 631 if (other_ses_cache->status_page != ses_cache->status_page) 632 ENC_FREE(ses_cache->status_page); 633 ses_cache->status_page = NULL; 634 } 635 636 static void 637 ses_cache_free_elm_map(enc_softc_t *enc, enc_cache_t *cache) 638 { 639 enc_element_t *cur_elm; 640 enc_element_t *last_elm; 641 642 ENC_DLOG(enc, "%s: enter\n", __func__); 643 if (cache->elm_map == NULL) 644 return; 645 646 ses_cache_free_elm_descs(enc, cache); 647 ses_cache_free_elm_addlstatus(enc, cache); 648 for (cur_elm = cache->elm_map, 649 last_elm = &cache->elm_map[cache->nelms]; 650 cur_elm != last_elm; cur_elm++) { 651 652 ENC_FREE_AND_NULL(cur_elm->elm_private); 653 } 654 ENC_FREE_AND_NULL(cache->elm_map); 655 cache->nelms = 0; 656 ENC_DLOG(enc, "%s: exit\n", __func__); 657 } 658 659 static void 660 ses_cache_free(enc_softc_t *enc, enc_cache_t *cache) 661 { 662 ses_cache_t *other_ses_cache; 663 ses_cache_t *ses_cache; 664 665 ENC_DLOG(enc, "%s: enter\n", __func__); 666 ses_cache_free_elm_addlstatus(enc, cache); 667 ses_cache_free_status(enc, cache); 668 ses_cache_free_elm_map(enc, cache); 669 670 ses_cache = cache->private; 671 ses_cache->ses_ntypes = 0; 672 673 other_ses_cache = enc_other_cache(enc, cache)->private; 674 if (other_ses_cache->subencs != ses_cache->subencs) 675 ENC_FREE(ses_cache->subencs); 676 ses_cache->subencs = NULL; 677 678 if (other_ses_cache->ses_types != ses_cache->ses_types) 679 ENC_FREE(ses_cache->ses_types); 680 ses_cache->ses_types = NULL; 681 682 if (other_ses_cache->cfg_page != ses_cache->cfg_page) 683 ENC_FREE(ses_cache->cfg_page); 684 ses_cache->cfg_page = NULL; 685 686 ENC_DLOG(enc, "%s: exit\n", __func__); 687 } 688 689 static void 690 ses_cache_clone(enc_softc_t *enc, enc_cache_t *src, enc_cache_t *dst) 691 { 692 ses_cache_t *dst_ses_cache; 693 ses_cache_t *src_ses_cache; 694 enc_element_t *src_elm; 695 enc_element_t *dst_elm; 696 enc_element_t *last_elm; 697 698 ses_cache_free(enc, dst); 699 src_ses_cache = src->private; 700 dst_ses_cache = dst->private; 701 702 /* 703 * The cloned enclosure cache and ses specific cache are 704 * mostly identical to the source. 705 */ 706 *dst = *src; 707 *dst_ses_cache = *src_ses_cache; 708 709 /* 710 * But the ses cache storage is still independent. Restore 711 * the pointer that was clobbered by the structure copy above. 712 */ 713 dst->private = dst_ses_cache; 714 715 /* 716 * The element map is independent even though it starts out 717 * pointing to the same constant page data. 718 */ 719 dst->elm_map = malloc(dst->nelms * sizeof(enc_element_t), 720 M_SCSIENC, M_WAITOK); 721 memcpy(dst->elm_map, src->elm_map, dst->nelms * sizeof(enc_element_t)); 722 for (dst_elm = dst->elm_map, src_elm = src->elm_map, 723 last_elm = &src->elm_map[src->nelms]; 724 src_elm != last_elm; src_elm++, dst_elm++) { 725 726 dst_elm->elm_private = malloc(sizeof(ses_element_t), 727 M_SCSIENC, M_WAITOK); 728 memcpy(dst_elm->elm_private, src_elm->elm_private, 729 sizeof(ses_element_t)); 730 } 731 } 732 733 /* Structure accessors. These are strongly typed to avoid errors. */ 734 735 int 736 ses_elm_sas_descr_type(union ses_elm_sas_hdr *obj) 737 { 738 return ((obj)->base_hdr.byte1 >> 6); 739 } 740 int 741 ses_elm_addlstatus_proto(struct ses_elm_addlstatus_base_hdr *hdr) 742 { 743 return ((hdr)->byte0 & 0xf); 744 } 745 int 746 ses_elm_addlstatus_eip(struct ses_elm_addlstatus_base_hdr *hdr) 747 { 748 return ((hdr)->byte0 >> 4) & 0x1; 749 } 750 int 751 ses_elm_addlstatus_invalid(struct ses_elm_addlstatus_base_hdr *hdr) 752 { 753 return ((hdr)->byte0 >> 7); 754 } 755 int 756 ses_elm_sas_type0_not_all_phys(union ses_elm_sas_hdr *hdr) 757 { 758 return ((hdr)->type0_noneip.byte1 & 0x1); 759 } 760 int 761 ses_elm_sas_dev_phy_sata_dev(struct ses_elm_sas_device_phy *phy) 762 { 763 return ((phy)->target_ports & 0x1); 764 } 765 int 766 ses_elm_sas_dev_phy_sata_port(struct ses_elm_sas_device_phy *phy) 767 { 768 return ((phy)->target_ports >> 7); 769 } 770 int 771 ses_elm_sas_dev_phy_dev_type(struct ses_elm_sas_device_phy *phy) 772 { 773 return (((phy)->byte0 >> 4) & 0x7); 774 } 775 776 /** 777 * \brief Verify that the cached configuration data in our softc 778 * is valid for processing the page data corresponding to 779 * the provided page header. 780 * 781 * \param ses_cache The SES cache to validate. 782 * \param gen_code The 4 byte generation code from a SES diagnostic 783 * page header. 784 * 785 * \return non-zero if true, 0 if false. 786 */ 787 static int 788 ses_config_cache_valid(ses_cache_t *ses_cache, const uint8_t *gen_code) 789 { 790 uint32_t cache_gc; 791 uint32_t cur_gc; 792 793 if (ses_cache->cfg_page == NULL) 794 return (0); 795 796 cache_gc = scsi_4btoul(ses_cache->cfg_page->hdr.gen_code); 797 cur_gc = scsi_4btoul(gen_code); 798 return (cache_gc == cur_gc); 799 } 800 801 /** 802 * Function signature for consumers of the ses_devids_iter() interface. 803 */ 804 typedef void ses_devid_callback_t(enc_softc_t *, enc_element_t *, 805 struct scsi_vpd_id_descriptor *, void *); 806 807 /** 808 * \brief Iterate over and create vpd device id records from the 809 * additional element status data for elm, passing that data 810 * to the provided callback. 811 * 812 * \param enc SES instance containing elm 813 * \param elm Element for which to extract device ID data. 814 * \param callback The callback function to invoke on each generated 815 * device id descriptor for elm. 816 * \param callback_arg Argument passed through to callback on each invocation. 817 */ 818 static void 819 ses_devids_iter(enc_softc_t *enc, enc_element_t *elm, 820 ses_devid_callback_t *callback, void *callback_arg) 821 { 822 ses_element_t *elmpriv; 823 struct ses_addl_status *addl; 824 u_int i; 825 size_t devid_record_size; 826 827 elmpriv = elm->elm_private; 828 addl = &(elmpriv->addl); 829 830 /* 831 * Don't assume this object has additional status information, or 832 * that it is a SAS device, or that it is a device slot device. 833 */ 834 if (addl->hdr == NULL || addl->proto_hdr.sas == NULL 835 || addl->proto_data.sasdev_phys == NULL) 836 return; 837 838 devid_record_size = SVPD_DEVICE_ID_DESC_HDR_LEN 839 + sizeof(struct scsi_vpd_id_naa_ieee_reg); 840 for (i = 0; i < addl->proto_hdr.sas->base_hdr.num_phys; i++) { 841 uint8_t devid_buf[devid_record_size]; 842 struct scsi_vpd_id_descriptor *devid; 843 uint8_t *phy_addr; 844 845 devid = (struct scsi_vpd_id_descriptor *)devid_buf; 846 phy_addr = addl->proto_data.sasdev_phys[i].phy_addr; 847 devid->proto_codeset = (SCSI_PROTO_SAS << SVPD_ID_PROTO_SHIFT) 848 | SVPD_ID_CODESET_BINARY; 849 devid->id_type = SVPD_ID_PIV 850 | SVPD_ID_ASSOC_PORT 851 | SVPD_ID_TYPE_NAA; 852 devid->reserved = 0; 853 devid->length = sizeof(struct scsi_vpd_id_naa_ieee_reg); 854 memcpy(devid->identifier, phy_addr, devid->length); 855 856 callback(enc, elm, devid, callback_arg); 857 } 858 } 859 860 /** 861 * Function signature for consumers of the ses_paths_iter() interface. 862 */ 863 typedef void ses_path_callback_t(enc_softc_t *, enc_element_t *, 864 struct cam_path *, void *); 865 866 /** 867 * Argument package passed through ses_devids_iter() by 868 * ses_paths_iter() to ses_path_iter_devid_callback(). 869 */ 870 typedef struct ses_path_iter_args { 871 ses_path_callback_t *callback; 872 void *callback_arg; 873 } ses_path_iter_args_t; 874 875 /** 876 * ses_devids_iter() callback function used by ses_paths_iter() 877 * to map device ids to peripheral driver instances. 878 * 879 * \param enc SES instance containing elm 880 * \param elm Element on which device ID matching is active. 881 * \param periph A device ID corresponding to elm. 882 * \param arg Argument passed through to callback on each invocation. 883 */ 884 static void 885 ses_path_iter_devid_callback(enc_softc_t *enc, enc_element_t *elem, 886 struct scsi_vpd_id_descriptor *devid, 887 void *arg) 888 { 889 struct ccb_dev_match cdm; 890 struct dev_match_pattern match_pattern; 891 struct dev_match_result match_result; 892 struct device_match_result *device_match; 893 struct device_match_pattern *device_pattern; 894 ses_path_iter_args_t *args; 895 896 args = (ses_path_iter_args_t *)arg; 897 match_pattern.type = DEV_MATCH_DEVICE; 898 device_pattern = &match_pattern.pattern.device_pattern; 899 device_pattern->flags = DEV_MATCH_DEVID; 900 device_pattern->data.devid_pat.id_len = 901 offsetof(struct scsi_vpd_id_descriptor, identifier) 902 + devid->length; 903 memcpy(device_pattern->data.devid_pat.id, devid, 904 device_pattern->data.devid_pat.id_len); 905 906 memset(&cdm, 0, sizeof(cdm)); 907 if (xpt_create_path(&cdm.ccb_h.path, /*periph*/NULL, 908 CAM_XPT_PATH_ID, 909 CAM_TARGET_WILDCARD, 910 CAM_LUN_WILDCARD) != CAM_REQ_CMP) 911 return; 912 913 cdm.ccb_h.func_code = XPT_DEV_MATCH; 914 cdm.num_patterns = 1; 915 cdm.patterns = &match_pattern; 916 cdm.pattern_buf_len = sizeof(match_pattern); 917 cdm.match_buf_len = sizeof(match_result); 918 cdm.matches = &match_result; 919 920 xpt_action((union ccb *)&cdm); 921 xpt_free_path(cdm.ccb_h.path); 922 923 if ((cdm.ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP 924 || (cdm.status != CAM_DEV_MATCH_LAST 925 && cdm.status != CAM_DEV_MATCH_MORE) 926 || cdm.num_matches == 0) 927 return; 928 929 device_match = &match_result.result.device_result; 930 if (xpt_create_path(&cdm.ccb_h.path, /*periph*/NULL, 931 device_match->path_id, 932 device_match->target_id, 933 device_match->target_lun) != CAM_REQ_CMP) 934 return; 935 936 args->callback(enc, elem, cdm.ccb_h.path, args->callback_arg); 937 938 xpt_free_path(cdm.ccb_h.path); 939 } 940 941 /** 942 * \brief Iterate over and find the matching periph objects for the 943 * specified element. 944 * 945 * \param enc SES instance containing elm 946 * \param elm Element for which to perform periph object matching. 947 * \param callback The callback function to invoke with each matching 948 * periph object. 949 * \param callback_arg Argument passed through to callback on each invocation. 950 */ 951 static void 952 ses_paths_iter(enc_softc_t *enc, enc_element_t *elm, 953 ses_path_callback_t *callback, void *callback_arg) 954 { 955 ses_path_iter_args_t args; 956 957 args.callback = callback; 958 args.callback_arg = callback_arg; 959 ses_devids_iter(enc, elm, ses_path_iter_devid_callback, &args); 960 } 961 962 /** 963 * ses_paths_iter() callback function used by ses_get_elmdevname() 964 * to record periph driver instance strings corresponding to a SES 965 * element. 966 * 967 * \param enc SES instance containing elm 968 * \param elm Element on which periph matching is active. 969 * \param periph A periph instance that matches elm. 970 * \param arg Argument passed through to callback on each invocation. 971 */ 972 static void 973 ses_elmdevname_callback(enc_softc_t *enc, enc_element_t *elem, 974 struct cam_path *path, void *arg) 975 { 976 struct sbuf *sb; 977 978 sb = (struct sbuf *)arg; 979 cam_periph_list(path, sb); 980 } 981 982 /** 983 * Argument package passed through ses_paths_iter() to 984 * ses_getcampath_callback. 985 */ 986 typedef struct ses_setphyspath_callback_args { 987 struct sbuf *physpath; 988 int num_set; 989 } ses_setphyspath_callback_args_t; 990 991 /** 992 * \brief ses_paths_iter() callback to set the physical path on the 993 * CAM EDT entries corresponding to a given SES element. 994 * 995 * \param enc SES instance containing elm 996 * \param elm Element on which periph matching is active. 997 * \param periph A periph instance that matches elm. 998 * \param arg Argument passed through to callback on each invocation. 999 */ 1000 static void 1001 ses_setphyspath_callback(enc_softc_t *enc, enc_element_t *elm, 1002 struct cam_path *path, void *arg) 1003 { 1004 struct ccb_dev_advinfo cdai; 1005 ses_setphyspath_callback_args_t *args; 1006 char *old_physpath; 1007 1008 args = (ses_setphyspath_callback_args_t *)arg; 1009 old_physpath = malloc(MAXPATHLEN, M_SCSIENC, M_WAITOK|M_ZERO); 1010 cam_periph_lock(enc->periph); 1011 xpt_setup_ccb(&cdai.ccb_h, path, CAM_PRIORITY_NORMAL); 1012 cdai.ccb_h.func_code = XPT_DEV_ADVINFO; 1013 cdai.buftype = CDAI_TYPE_PHYS_PATH; 1014 cdai.flags = CDAI_FLAG_NONE; 1015 cdai.bufsiz = MAXPATHLEN; 1016 cdai.buf = old_physpath; 1017 xpt_action((union ccb *)&cdai); 1018 if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0) 1019 cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE); 1020 1021 if (strcmp(old_physpath, sbuf_data(args->physpath)) != 0) { 1022 1023 xpt_setup_ccb(&cdai.ccb_h, path, CAM_PRIORITY_NORMAL); 1024 cdai.ccb_h.func_code = XPT_DEV_ADVINFO; 1025 cdai.buftype = CDAI_TYPE_PHYS_PATH; 1026 cdai.flags = CDAI_FLAG_STORE; 1027 cdai.bufsiz = sbuf_len(args->physpath); 1028 cdai.buf = sbuf_data(args->physpath); 1029 xpt_action((union ccb *)&cdai); 1030 if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0) 1031 cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE); 1032 if (cdai.ccb_h.status == CAM_REQ_CMP) 1033 args->num_set++; 1034 } 1035 cam_periph_unlock(enc->periph); 1036 free(old_physpath, M_SCSIENC); 1037 } 1038 1039 /** 1040 * \brief Set a device's physical path string in CAM XPT. 1041 * 1042 * \param enc SES instance containing elm 1043 * \param elm Element to publish physical path string for 1044 * \param iter Iterator whose state corresponds to elm 1045 * 1046 * \return 0 on success, errno otherwise. 1047 */ 1048 static int 1049 ses_set_physpath(enc_softc_t *enc, enc_element_t *elm, 1050 struct ses_iterator *iter) 1051 { 1052 struct ccb_dev_advinfo cdai; 1053 ses_setphyspath_callback_args_t args; 1054 int i, ret; 1055 struct sbuf sb; 1056 struct scsi_vpd_id_descriptor *idd; 1057 uint8_t *devid; 1058 ses_element_t *elmpriv; 1059 const char *c; 1060 1061 ret = EIO; 1062 devid = NULL; 1063 1064 /* 1065 * Assemble the components of the physical path starting with 1066 * the device ID of the enclosure itself. 1067 */ 1068 xpt_setup_ccb(&cdai.ccb_h, enc->periph->path, CAM_PRIORITY_NORMAL); 1069 cdai.ccb_h.func_code = XPT_DEV_ADVINFO; 1070 cdai.flags = CDAI_FLAG_NONE; 1071 cdai.buftype = CDAI_TYPE_SCSI_DEVID; 1072 cdai.bufsiz = CAM_SCSI_DEVID_MAXLEN; 1073 cdai.buf = devid = malloc(cdai.bufsiz, M_SCSIENC, M_WAITOK|M_ZERO); 1074 cam_periph_lock(enc->periph); 1075 xpt_action((union ccb *)&cdai); 1076 if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0) 1077 cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE); 1078 cam_periph_unlock(enc->periph); 1079 if (cdai.ccb_h.status != CAM_REQ_CMP) 1080 goto out; 1081 1082 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf, 1083 cdai.provsiz, scsi_devid_is_naa_ieee_reg); 1084 if (idd == NULL) 1085 goto out; 1086 1087 if (sbuf_new(&sb, NULL, 128, SBUF_AUTOEXTEND) == NULL) { 1088 ret = ENOMEM; 1089 goto out; 1090 } 1091 /* Next, generate the physical path string */ 1092 sbuf_printf(&sb, "id1,enc@n%jx/type@%x/slot@%x", 1093 scsi_8btou64(idd->identifier), iter->type_index, 1094 iter->type_element_index); 1095 /* Append the element descriptor if one exists */ 1096 elmpriv = elm->elm_private; 1097 if (elmpriv->descr != NULL && elmpriv->descr_len > 0) { 1098 sbuf_cat(&sb, "/elmdesc@"); 1099 for (i = 0, c = elmpriv->descr; i < elmpriv->descr_len; 1100 i++, c++) { 1101 if (!isprint(*c) || isspace(*c) || *c == '/') 1102 sbuf_putc(&sb, '_'); 1103 else 1104 sbuf_putc(&sb, *c); 1105 } 1106 } 1107 sbuf_finish(&sb); 1108 1109 /* 1110 * Set this physical path on any CAM devices with a device ID 1111 * descriptor that matches one created from the SES additional 1112 * status data for this element. 1113 */ 1114 args.physpath= &sb; 1115 args.num_set = 0; 1116 ses_paths_iter(enc, elm, ses_setphyspath_callback, &args); 1117 sbuf_delete(&sb); 1118 1119 ret = args.num_set == 0 ? ENOENT : 0; 1120 1121 out: 1122 if (devid != NULL) 1123 ENC_FREE(devid); 1124 return (ret); 1125 } 1126 1127 /** 1128 * \brief Helper to set the CDB fields appropriately. 1129 * 1130 * \param cdb Buffer containing the cdb. 1131 * \param pagenum SES diagnostic page to query for. 1132 * \param dir Direction of query. 1133 */ 1134 static void 1135 ses_page_cdb(char *cdb, int bufsiz, SesDiagPageCodes pagenum, int dir) 1136 { 1137 1138 /* Ref: SPC-4 r25 Section 6.20 Table 223 */ 1139 if (dir == CAM_DIR_IN) { 1140 cdb[0] = RECEIVE_DIAGNOSTIC; 1141 cdb[1] = 1; /* Set page code valid bit */ 1142 cdb[2] = pagenum; 1143 } else { 1144 cdb[0] = SEND_DIAGNOSTIC; 1145 cdb[1] = 0x10; 1146 cdb[2] = pagenum; 1147 } 1148 cdb[3] = bufsiz >> 8; /* high bits */ 1149 cdb[4] = bufsiz & 0xff; /* low bits */ 1150 cdb[5] = 0; 1151 } 1152 1153 /** 1154 * \brief Discover whether this instance supports timed completion of a 1155 * RECEIVE DIAGNOSTIC RESULTS command requesting the Enclosure Status 1156 * page, and store the result in the softc, updating if necessary. 1157 * 1158 * \param enc SES instance to query and update. 1159 * \param tc_en Value of timed completion to set (see \return). 1160 * 1161 * \return 1 if timed completion enabled, 0 otherwise. 1162 */ 1163 static int 1164 ses_set_timed_completion(enc_softc_t *enc, uint8_t tc_en) 1165 { 1166 union ccb *ccb; 1167 struct cam_periph *periph; 1168 struct ses_mgmt_mode_page *mgmt; 1169 uint8_t *mode_buf; 1170 size_t mode_buf_len; 1171 ses_softc_t *ses; 1172 1173 periph = enc->periph; 1174 ses = enc->enc_private; 1175 ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL); 1176 1177 mode_buf_len = sizeof(struct ses_mgmt_mode_page); 1178 mode_buf = ENC_MALLOCZ(mode_buf_len); 1179 if (mode_buf == NULL) 1180 goto out; 1181 1182 scsi_mode_sense(&ccb->csio, /*retries*/4, NULL, MSG_SIMPLE_Q_TAG, 1183 /*dbd*/FALSE, SMS_PAGE_CTRL_CURRENT, SES_MGMT_MODE_PAGE_CODE, 1184 mode_buf, mode_buf_len, SSD_FULL_SIZE, /*timeout*/60 * 1000); 1185 1186 /* 1187 * Ignore illegal request errors, as they are quite common and we 1188 * will print something out in that case anyway. 1189 */ 1190 cam_periph_runccb(ccb, enc_error, ENC_CFLAGS, 1191 ENC_FLAGS|SF_QUIET_IR, NULL); 1192 if (ccb->ccb_h.status != CAM_REQ_CMP) { 1193 ENC_VLOG(enc, "Timed Completion Unsupported\n"); 1194 goto release; 1195 } 1196 1197 /* Skip the mode select if the desired value is already set */ 1198 mgmt = (struct ses_mgmt_mode_page *)mode_buf; 1199 if ((mgmt->byte5 & SES_MGMT_TIMED_COMP_EN) == tc_en) 1200 goto done; 1201 1202 /* Value is not what we wanted, set it */ 1203 if (tc_en) 1204 mgmt->byte5 |= SES_MGMT_TIMED_COMP_EN; 1205 else 1206 mgmt->byte5 &= ~SES_MGMT_TIMED_COMP_EN; 1207 /* SES2r20: a completion time of zero means as long as possible */ 1208 bzero(&mgmt->max_comp_time, sizeof(mgmt->max_comp_time)); 1209 1210 scsi_mode_select(&ccb->csio, 5, NULL, MSG_SIMPLE_Q_TAG, 1211 /*page_fmt*/FALSE, /*save_pages*/TRUE, mode_buf, mode_buf_len, 1212 SSD_FULL_SIZE, /*timeout*/60 * 1000); 1213 1214 cam_periph_runccb(ccb, enc_error, ENC_CFLAGS, ENC_FLAGS, NULL); 1215 if (ccb->ccb_h.status != CAM_REQ_CMP) { 1216 ENC_VLOG(enc, "Timed Completion Set Failed\n"); 1217 goto release; 1218 } 1219 1220 done: 1221 if ((mgmt->byte5 & SES_MGMT_TIMED_COMP_EN) != 0) { 1222 ENC_LOG(enc, "Timed Completion Enabled\n"); 1223 ses->ses_flags |= SES_FLAG_TIMEDCOMP; 1224 } else { 1225 ENC_LOG(enc, "Timed Completion Disabled\n"); 1226 ses->ses_flags &= ~SES_FLAG_TIMEDCOMP; 1227 } 1228 release: 1229 ENC_FREE(mode_buf); 1230 xpt_release_ccb(ccb); 1231 out: 1232 return (ses->ses_flags & SES_FLAG_TIMEDCOMP); 1233 } 1234 1235 /** 1236 * \brief Process the list of supported pages and update flags. 1237 * 1238 * \param enc SES device to query. 1239 * \param buf Buffer containing the config page. 1240 * \param xfer_len Length of the config page in the buffer. 1241 * 1242 * \return 0 on success, errno otherwise. 1243 */ 1244 static int 1245 ses_process_pages(enc_softc_t *enc, struct enc_fsm_state *state, 1246 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 1247 { 1248 ses_softc_t *ses; 1249 struct scsi_diag_page *page; 1250 int err, i, length; 1251 1252 CAM_DEBUG(enc->periph->path, CAM_DEBUG_SUBTRACE, 1253 ("entering %s(%p, %d)\n", __func__, bufp, xfer_len)); 1254 ses = enc->enc_private; 1255 err = -1; 1256 1257 if (error != 0) { 1258 err = error; 1259 goto out; 1260 } 1261 if (xfer_len < sizeof(*page)) { 1262 ENC_VLOG(enc, "Unable to parse Diag Pages List Header\n"); 1263 err = EIO; 1264 goto out; 1265 } 1266 page = (struct scsi_diag_page *)*bufp; 1267 length = scsi_2btoul(page->length); 1268 if (length + offsetof(struct scsi_diag_page, params) > xfer_len) { 1269 ENC_VLOG(enc, "Diag Pages List Too Long\n"); 1270 goto out; 1271 } 1272 ENC_DLOG(enc, "%s: page length %d, xfer_len %d\n", 1273 __func__, length, xfer_len); 1274 1275 err = 0; 1276 for (i = 0; i < length; i++) { 1277 if (page->params[i] == SesElementDescriptor) 1278 ses->ses_flags |= SES_FLAG_DESC; 1279 else if (page->params[i] == SesAddlElementStatus) 1280 ses->ses_flags |= SES_FLAG_ADDLSTATUS; 1281 } 1282 1283 out: 1284 ENC_DLOG(enc, "%s: exiting with err %d\n", __func__, err); 1285 return (err); 1286 } 1287 1288 /** 1289 * \brief Process the config page and update associated structures. 1290 * 1291 * \param enc SES device to query. 1292 * \param buf Buffer containing the config page. 1293 * \param xfer_len Length of the config page in the buffer. 1294 * 1295 * \return 0 on success, errno otherwise. 1296 */ 1297 static int 1298 ses_process_config(enc_softc_t *enc, struct enc_fsm_state *state, 1299 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 1300 { 1301 struct ses_iterator iter; 1302 ses_softc_t *ses; 1303 enc_cache_t *enc_cache; 1304 ses_cache_t *ses_cache; 1305 uint8_t *buf; 1306 int length; 1307 int err; 1308 int nelm; 1309 int ntype; 1310 struct ses_cfg_page *cfg_page; 1311 struct ses_enc_desc *buf_subenc; 1312 const struct ses_enc_desc **subencs; 1313 const struct ses_enc_desc **cur_subenc; 1314 const struct ses_enc_desc **last_subenc; 1315 ses_type_t *ses_types; 1316 ses_type_t *sestype; 1317 const struct ses_elm_type_desc *cur_buf_type; 1318 const struct ses_elm_type_desc *last_buf_type; 1319 uint8_t *last_valid_byte; 1320 enc_element_t *element; 1321 const char *type_text; 1322 1323 CAM_DEBUG(enc->periph->path, CAM_DEBUG_SUBTRACE, 1324 ("entering %s(%p, %d)\n", __func__, bufp, xfer_len)); 1325 ses = enc->enc_private; 1326 enc_cache = &enc->enc_daemon_cache; 1327 ses_cache = enc_cache->private; 1328 buf = *bufp; 1329 err = -1; 1330 1331 if (error != 0) { 1332 err = error; 1333 goto out; 1334 } 1335 if (xfer_len < sizeof(cfg_page->hdr)) { 1336 ENC_VLOG(enc, "Unable to parse SES Config Header\n"); 1337 err = EIO; 1338 goto out; 1339 } 1340 1341 cfg_page = (struct ses_cfg_page *)buf; 1342 length = ses_page_length(&cfg_page->hdr); 1343 if (length > xfer_len) { 1344 ENC_VLOG(enc, "Enclosure Config Page Too Long\n"); 1345 goto out; 1346 } 1347 last_valid_byte = &buf[length - 1]; 1348 1349 ENC_DLOG(enc, "%s: total page length %d, xfer_len %d\n", 1350 __func__, length, xfer_len); 1351 1352 err = 0; 1353 if (ses_config_cache_valid(ses_cache, cfg_page->hdr.gen_code)) { 1354 1355 /* Our cache is still valid. Proceed to fetching status. */ 1356 goto out; 1357 } 1358 1359 /* Cache is no longer valid. Free old data to make way for new. */ 1360 ses_cache_free(enc, enc_cache); 1361 ENC_VLOG(enc, "Generation Code 0x%x has %d SubEnclosures\n", 1362 scsi_4btoul(cfg_page->hdr.gen_code), 1363 ses_cfg_page_get_num_subenc(cfg_page)); 1364 1365 /* Take ownership of the buffer. */ 1366 ses_cache->cfg_page = cfg_page; 1367 *bufp = NULL; 1368 1369 /* 1370 * Now waltz through all the subenclosures summing the number of 1371 * types available in each. 1372 */ 1373 subencs = malloc(ses_cfg_page_get_num_subenc(cfg_page) 1374 * sizeof(*subencs), M_SCSIENC, M_WAITOK|M_ZERO); 1375 /* 1376 * Sub-enclosure data is const after construction (i.e. when 1377 * accessed via our cache object. 1378 * 1379 * The cast here is not required in C++ but C99 is not so 1380 * sophisticated (see C99 6.5.16.1(1)). 1381 */ 1382 ses_cache->ses_nsubencs = ses_cfg_page_get_num_subenc(cfg_page); 1383 ses_cache->subencs = subencs; 1384 1385 buf_subenc = cfg_page->subencs; 1386 cur_subenc = subencs; 1387 last_subenc = &subencs[ses_cache->ses_nsubencs - 1]; 1388 ntype = 0; 1389 while (cur_subenc <= last_subenc) { 1390 1391 if (!ses_enc_desc_is_complete(buf_subenc, last_valid_byte)) { 1392 ENC_VLOG(enc, "Enclosure %d Beyond End of " 1393 "Descriptors\n", cur_subenc - subencs); 1394 err = EIO; 1395 goto out; 1396 } 1397 1398 ENC_VLOG(enc, " SubEnclosure ID %d, %d Types With this ID, " 1399 "Descriptor Length %d, offset %d\n", buf_subenc->subenc_id, 1400 buf_subenc->num_types, buf_subenc->length, 1401 &buf_subenc->byte0 - buf); 1402 ENC_VLOG(enc, "WWN: %jx\n", 1403 (uintmax_t)scsi_8btou64(buf_subenc->logical_id)); 1404 1405 ntype += buf_subenc->num_types; 1406 *cur_subenc = buf_subenc; 1407 cur_subenc++; 1408 buf_subenc = ses_enc_desc_next(buf_subenc); 1409 } 1410 1411 /* Process the type headers. */ 1412 ses_types = malloc(ntype * sizeof(*ses_types), 1413 M_SCSIENC, M_WAITOK|M_ZERO); 1414 /* 1415 * Type data is const after construction (i.e. when accessed via 1416 * our cache object. 1417 */ 1418 ses_cache->ses_ntypes = ntype; 1419 ses_cache->ses_types = ses_types; 1420 1421 cur_buf_type = (const struct ses_elm_type_desc *) 1422 (&(*last_subenc)->length + (*last_subenc)->length + 1); 1423 last_buf_type = cur_buf_type + ntype - 1; 1424 type_text = (const uint8_t *)(last_buf_type + 1); 1425 nelm = 0; 1426 sestype = ses_types; 1427 while (cur_buf_type <= last_buf_type) { 1428 if (&cur_buf_type->etype_txt_len > last_valid_byte) { 1429 ENC_VLOG(enc, "Runt Enclosure Type Header %d\n", 1430 sestype - ses_types); 1431 err = EIO; 1432 goto out; 1433 } 1434 sestype->hdr = cur_buf_type; 1435 sestype->text = type_text; 1436 type_text += cur_buf_type->etype_txt_len; 1437 ENC_VLOG(enc, " Type Desc[%d]: Type 0x%x, MaxElt %d, In Subenc " 1438 "%d, Text Length %d: %.*s\n", sestype - ses_types, 1439 sestype->hdr->etype_elm_type, sestype->hdr->etype_maxelt, 1440 sestype->hdr->etype_subenc, sestype->hdr->etype_txt_len, 1441 sestype->hdr->etype_txt_len, sestype->text); 1442 1443 nelm += sestype->hdr->etype_maxelt 1444 + /*overall status element*/1; 1445 sestype++; 1446 cur_buf_type++; 1447 } 1448 1449 /* Create the object map. */ 1450 enc_cache->elm_map = malloc(nelm * sizeof(enc_element_t), 1451 M_SCSIENC, M_WAITOK|M_ZERO); 1452 enc_cache->nelms = nelm; 1453 1454 ses_iter_init(enc, enc_cache, &iter); 1455 while ((element = ses_iter_next(&iter)) != NULL) { 1456 const struct ses_elm_type_desc *thdr; 1457 1458 ENC_DLOG(enc, "%s: checking obj %d(%d,%d)\n", __func__, 1459 iter.global_element_index, iter.type_index, nelm, 1460 iter.type_element_index); 1461 thdr = ses_cache->ses_types[iter.type_index].hdr; 1462 element->subenclosure = thdr->etype_subenc; 1463 element->enctype = thdr->etype_elm_type; 1464 element->overall_status_elem = iter.type_element_index == 0; 1465 element->elm_private = malloc(sizeof(ses_element_t), 1466 M_SCSIENC, M_WAITOK|M_ZERO); 1467 ENC_DLOG(enc, "%s: creating elmpriv %d(%d,%d) subenc %d " 1468 "type 0x%x\n", __func__, iter.global_element_index, 1469 iter.type_index, iter.type_element_index, 1470 thdr->etype_subenc, thdr->etype_elm_type); 1471 } 1472 1473 err = 0; 1474 1475 out: 1476 if (err) 1477 ses_cache_free(enc, enc_cache); 1478 else { 1479 ses_poll_status(enc); 1480 enc_update_request(enc, SES_PUBLISH_CACHE); 1481 } 1482 ENC_DLOG(enc, "%s: exiting with err %d\n", __func__, err); 1483 return (err); 1484 } 1485 1486 /** 1487 * \brief Update the status page and associated structures. 1488 * 1489 * \param enc SES softc to update for. 1490 * \param buf Buffer containing the status page. 1491 * \param bufsz Amount of data in the buffer. 1492 * 1493 * \return 0 on success, errno otherwise. 1494 */ 1495 static int 1496 ses_process_status(enc_softc_t *enc, struct enc_fsm_state *state, 1497 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 1498 { 1499 struct ses_iterator iter; 1500 enc_element_t *element; 1501 ses_softc_t *ses; 1502 enc_cache_t *enc_cache; 1503 ses_cache_t *ses_cache; 1504 uint8_t *buf; 1505 int err = -1; 1506 int length; 1507 struct ses_status_page *page; 1508 union ses_status_element *cur_stat; 1509 union ses_status_element *last_stat; 1510 1511 ses = enc->enc_private; 1512 enc_cache = &enc->enc_daemon_cache; 1513 ses_cache = enc_cache->private; 1514 buf = *bufp; 1515 1516 ENC_DLOG(enc, "%s: enter (%p, %p, %d)\n", __func__, enc, buf, xfer_len); 1517 page = (struct ses_status_page *)buf; 1518 length = ses_page_length(&page->hdr); 1519 1520 if (error != 0) { 1521 err = error; 1522 goto out; 1523 } 1524 /* 1525 * Make sure the length fits in the buffer. 1526 * 1527 * XXX all this means is that the page is larger than the space 1528 * we allocated. Since we use a statically sized buffer, this 1529 * could happen... Need to use dynamic discovery of the size. 1530 */ 1531 if (length > xfer_len) { 1532 ENC_VLOG(enc, "Enclosure Status Page Too Long\n"); 1533 goto out; 1534 } 1535 1536 /* Check for simple enclosure reporting short enclosure status. */ 1537 if (length >= 4 && page->hdr.page_code == SesShortStatus) { 1538 ENC_DLOG(enc, "Got Short Enclosure Status page\n"); 1539 ses->ses_flags &= ~(SES_FLAG_ADDLSTATUS | SES_FLAG_DESC); 1540 ses_cache_free(enc, enc_cache); 1541 enc_cache->enc_status = page->hdr.page_specific_flags; 1542 enc_update_request(enc, SES_PUBLISH_CACHE); 1543 err = 0; 1544 goto out; 1545 } 1546 1547 /* Make sure the length contains at least one header and status */ 1548 if (length < (sizeof(*page) + sizeof(*page->elements))) { 1549 ENC_VLOG(enc, "Enclosure Status Page Too Short\n"); 1550 goto out; 1551 } 1552 1553 if (!ses_config_cache_valid(ses_cache, page->hdr.gen_code)) { 1554 ENC_DLOG(enc, "%s: Generation count change detected\n", 1555 __func__); 1556 enc_update_request(enc, SES_UPDATE_GETCONFIG); 1557 goto out; 1558 } 1559 1560 ses_cache_free_status(enc, enc_cache); 1561 ses_cache->status_page = page; 1562 *bufp = NULL; 1563 1564 enc_cache->enc_status = page->hdr.page_specific_flags; 1565 1566 /* 1567 * Read in individual element status. The element order 1568 * matches the order reported in the config page (i.e. the 1569 * order of an unfiltered iteration of the config objects).. 1570 */ 1571 ses_iter_init(enc, enc_cache, &iter); 1572 cur_stat = page->elements; 1573 last_stat = (union ses_status_element *) 1574 &buf[length - sizeof(*last_stat)]; 1575 ENC_DLOG(enc, "%s: total page length %d, xfer_len %d\n", 1576 __func__, length, xfer_len); 1577 while (cur_stat <= last_stat 1578 && (element = ses_iter_next(&iter)) != NULL) { 1579 1580 ENC_DLOG(enc, "%s: obj %d(%d,%d) off=0x%tx status=%jx\n", 1581 __func__, iter.global_element_index, iter.type_index, 1582 iter.type_element_index, (uint8_t *)cur_stat - buf, 1583 scsi_4btoul(cur_stat->bytes)); 1584 1585 memcpy(&element->encstat, cur_stat, sizeof(element->encstat)); 1586 element->svalid = 1; 1587 cur_stat++; 1588 } 1589 1590 if (ses_iter_next(&iter) != NULL) { 1591 ENC_VLOG(enc, "Status page, length insufficient for " 1592 "expected number of objects\n"); 1593 } else { 1594 if (cur_stat <= last_stat) 1595 ENC_VLOG(enc, "Status page, exhausted objects before " 1596 "exhausing page\n"); 1597 enc_update_request(enc, SES_PUBLISH_CACHE); 1598 err = 0; 1599 } 1600 out: 1601 ENC_DLOG(enc, "%s: exiting with error %d\n", __func__, err); 1602 return (err); 1603 } 1604 1605 typedef enum { 1606 /** 1607 * The enclosure should not provide additional element 1608 * status for this element type in page 0x0A. 1609 * 1610 * \note This status is returned for any types not 1611 * listed SES3r02. Further types added in a 1612 * future specification will be incorrectly 1613 * classified. 1614 */ 1615 TYPE_ADDLSTATUS_NONE, 1616 1617 /** 1618 * The element type provides additional element status 1619 * in page 0x0A. 1620 */ 1621 TYPE_ADDLSTATUS_MANDATORY, 1622 1623 /** 1624 * The element type may provide additional element status 1625 * in page 0x0A, but i 1626 */ 1627 TYPE_ADDLSTATUS_OPTIONAL 1628 } ses_addlstatus_avail_t; 1629 1630 /** 1631 * \brief Check to see whether a given type (as obtained via type headers) is 1632 * supported by the additional status command. 1633 * 1634 * \param enc SES softc to check. 1635 * \param typidx Type index to check for. 1636 * 1637 * \return An enumeration indicating if additional status is mandatory, 1638 * optional, or not required for this type. 1639 */ 1640 static ses_addlstatus_avail_t 1641 ses_typehasaddlstatus(enc_softc_t *enc, uint8_t typidx) 1642 { 1643 enc_cache_t *enc_cache; 1644 ses_cache_t *ses_cache; 1645 1646 enc_cache = &enc->enc_daemon_cache; 1647 ses_cache = enc_cache->private; 1648 switch(ses_cache->ses_types[typidx].hdr->etype_elm_type) { 1649 case ELMTYP_DEVICE: 1650 case ELMTYP_ARRAY_DEV: 1651 case ELMTYP_SAS_EXP: 1652 return (TYPE_ADDLSTATUS_MANDATORY); 1653 case ELMTYP_SCSI_INI: 1654 case ELMTYP_SCSI_TGT: 1655 case ELMTYP_ESCC: 1656 return (TYPE_ADDLSTATUS_OPTIONAL); 1657 default: 1658 /* No additional status information available. */ 1659 break; 1660 } 1661 return (TYPE_ADDLSTATUS_NONE); 1662 } 1663 1664 static int ses_get_elm_addlstatus_fc(enc_softc_t *, enc_cache_t *, 1665 uint8_t *, int); 1666 static int ses_get_elm_addlstatus_sas(enc_softc_t *, enc_cache_t *, uint8_t *, 1667 int, int, int, int); 1668 1669 /** 1670 * \brief Parse the additional status element data for each object. 1671 * 1672 * \param enc The SES softc to update. 1673 * \param buf The buffer containing the additional status 1674 * element response. 1675 * \param xfer_len Size of the buffer. 1676 * 1677 * \return 0 on success, errno otherwise. 1678 */ 1679 static int 1680 ses_process_elm_addlstatus(enc_softc_t *enc, struct enc_fsm_state *state, 1681 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 1682 { 1683 struct ses_iterator iter, titer; 1684 int eip; 1685 int err; 1686 int ignore_index = 0; 1687 int length; 1688 int offset; 1689 enc_cache_t *enc_cache; 1690 ses_cache_t *ses_cache; 1691 uint8_t *buf; 1692 ses_element_t *elmpriv; 1693 const struct ses_page_hdr *hdr; 1694 enc_element_t *element, *telement; 1695 1696 enc_cache = &enc->enc_daemon_cache; 1697 ses_cache = enc_cache->private; 1698 buf = *bufp; 1699 err = -1; 1700 1701 if (error != 0) { 1702 err = error; 1703 goto out; 1704 } 1705 ses_cache_free_elm_addlstatus(enc, enc_cache); 1706 ses_cache->elm_addlstatus_page = 1707 (struct ses_addl_elem_status_page *)buf; 1708 *bufp = NULL; 1709 1710 /* 1711 * The objects appear in the same order here as in Enclosure Status, 1712 * which itself is ordered by the Type Descriptors from the Config 1713 * page. However, it is necessary to skip elements that are not 1714 * supported by this page when counting them. 1715 */ 1716 hdr = &ses_cache->elm_addlstatus_page->hdr; 1717 length = ses_page_length(hdr); 1718 ENC_DLOG(enc, "Additional Element Status Page Length 0x%x\n", length); 1719 /* Make sure the length includes at least one header. */ 1720 if (length < sizeof(*hdr)+sizeof(struct ses_elm_addlstatus_base_hdr)) { 1721 ENC_VLOG(enc, "Runt Additional Element Status Page\n"); 1722 goto out; 1723 } 1724 if (length > xfer_len) { 1725 ENC_VLOG(enc, "Additional Element Status Page Too Long\n"); 1726 goto out; 1727 } 1728 1729 if (!ses_config_cache_valid(ses_cache, hdr->gen_code)) { 1730 ENC_DLOG(enc, "%s: Generation count change detected\n", 1731 __func__); 1732 enc_update_request(enc, SES_UPDATE_GETCONFIG); 1733 goto out; 1734 } 1735 1736 offset = sizeof(struct ses_page_hdr); 1737 ses_iter_init(enc, enc_cache, &iter); 1738 while (offset < length 1739 && (element = ses_iter_next(&iter)) != NULL) { 1740 struct ses_elm_addlstatus_base_hdr *elm_hdr; 1741 int proto_info_len; 1742 ses_addlstatus_avail_t status_type; 1743 1744 /* 1745 * Additional element status is only provided for 1746 * individual elements (i.e. overal status elements 1747 * are excluded) and those of the types specified 1748 * in the SES spec. 1749 */ 1750 status_type = ses_typehasaddlstatus(enc, iter.type_index); 1751 if (iter.individual_element_index == ITERATOR_INDEX_INVALID 1752 || status_type == TYPE_ADDLSTATUS_NONE) 1753 continue; 1754 1755 elm_hdr = (struct ses_elm_addlstatus_base_hdr *)&buf[offset]; 1756 eip = ses_elm_addlstatus_eip(elm_hdr); 1757 if (eip && !ignore_index) { 1758 struct ses_elm_addlstatus_eip_hdr *eip_hdr; 1759 int expected_index, index; 1760 ses_elem_index_type_t index_type; 1761 1762 eip_hdr = (struct ses_elm_addlstatus_eip_hdr *)elm_hdr; 1763 if (eip_hdr->byte2 & SES_ADDL_EIP_EIIOE) { 1764 index_type = SES_ELEM_INDEX_GLOBAL; 1765 expected_index = iter.global_element_index; 1766 } else { 1767 index_type = SES_ELEM_INDEX_INDIVIDUAL; 1768 expected_index = iter.individual_element_index; 1769 } 1770 titer = iter; 1771 telement = ses_iter_seek_to(&titer, 1772 eip_hdr->element_index, index_type); 1773 if (telement != NULL && 1774 (ses_typehasaddlstatus(enc, titer.type_index) != 1775 TYPE_ADDLSTATUS_NONE || 1776 titer.type_index > ELMTYP_SAS_CONN)) { 1777 iter = titer; 1778 element = telement; 1779 } else 1780 ignore_index = 1; 1781 1782 if (eip_hdr->byte2 & SES_ADDL_EIP_EIIOE) 1783 index = iter.global_element_index; 1784 else 1785 index = iter.individual_element_index; 1786 if (index > expected_index 1787 && status_type == TYPE_ADDLSTATUS_MANDATORY) { 1788 ENC_VLOG(enc, "%s: provided %s element" 1789 "index %d skips mandatory status " 1790 " element at index %d\n", 1791 __func__, (eip_hdr->byte2 & 1792 SES_ADDL_EIP_EIIOE) ? "global " : "", 1793 index, expected_index); 1794 } 1795 } 1796 elmpriv = element->elm_private; 1797 elmpriv->addl.hdr = elm_hdr; 1798 ENC_DLOG(enc, "%s: global element index=%d, type index=%d " 1799 "type element index=%d, offset=0x%x, " 1800 "byte0=0x%x, length=0x%x\n", __func__, 1801 iter.global_element_index, iter.type_index, 1802 iter.type_element_index, offset, elmpriv->addl.hdr->byte0, 1803 elmpriv->addl.hdr->length); 1804 1805 /* Skip to after the length field */ 1806 offset += sizeof(struct ses_elm_addlstatus_base_hdr); 1807 1808 /* Make sure the descriptor is within bounds */ 1809 if ((offset + elmpriv->addl.hdr->length) > length) { 1810 ENC_VLOG(enc, "Element %d Beyond End " 1811 "of Additional Element Status Descriptors\n", 1812 iter.global_element_index); 1813 break; 1814 } 1815 1816 /* Advance to the protocol data, skipping eip bytes if needed */ 1817 offset += (eip * SES_EIP_HDR_EXTRA_LEN); 1818 proto_info_len = elmpriv->addl.hdr->length 1819 - (eip * SES_EIP_HDR_EXTRA_LEN); 1820 1821 /* Errors in this block are ignored as they are non-fatal */ 1822 switch(ses_elm_addlstatus_proto(elmpriv->addl.hdr)) { 1823 case SPSP_PROTO_FC: 1824 if (elmpriv->addl.hdr->length == 0) 1825 break; 1826 ses_get_elm_addlstatus_fc(enc, enc_cache, 1827 &buf[offset], proto_info_len); 1828 break; 1829 case SPSP_PROTO_SAS: 1830 if (elmpriv->addl.hdr->length <= 2) 1831 break; 1832 ses_get_elm_addlstatus_sas(enc, enc_cache, 1833 &buf[offset], 1834 proto_info_len, 1835 eip, iter.type_index, 1836 iter.global_element_index); 1837 break; 1838 default: 1839 ENC_VLOG(enc, "Element %d: Unknown Additional Element " 1840 "Protocol 0x%x\n", iter.global_element_index, 1841 ses_elm_addlstatus_proto(elmpriv->addl.hdr)); 1842 break; 1843 } 1844 1845 offset += proto_info_len; 1846 } 1847 err = 0; 1848 out: 1849 if (err) 1850 ses_cache_free_elm_addlstatus(enc, enc_cache); 1851 enc_update_request(enc, SES_PUBLISH_PHYSPATHS); 1852 enc_update_request(enc, SES_PUBLISH_CACHE); 1853 return (err); 1854 } 1855 1856 static int 1857 ses_process_control_request(enc_softc_t *enc, struct enc_fsm_state *state, 1858 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 1859 { 1860 ses_softc_t *ses; 1861 1862 ses = enc->enc_private; 1863 /* 1864 * Possible errors: 1865 * o Generation count wrong. 1866 * o Some SCSI status error. 1867 */ 1868 ses_terminate_control_requests(&ses->ses_pending_requests, error); 1869 ses_poll_status(enc); 1870 return (0); 1871 } 1872 1873 static int 1874 ses_publish_physpaths(enc_softc_t *enc, struct enc_fsm_state *state, 1875 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 1876 { 1877 struct ses_iterator iter; 1878 enc_cache_t *enc_cache; 1879 enc_element_t *element; 1880 1881 enc_cache = &enc->enc_daemon_cache; 1882 1883 ses_iter_init(enc, enc_cache, &iter); 1884 while ((element = ses_iter_next(&iter)) != NULL) { 1885 /* 1886 * ses_set_physpath() returns success if we changed 1887 * the physpath of any element. This allows us to 1888 * only announce devices once regardless of how 1889 * many times we process additional element status. 1890 */ 1891 if (ses_set_physpath(enc, element, &iter) == 0) 1892 ses_print_addl_data(enc, element); 1893 } 1894 1895 return (0); 1896 } 1897 1898 static int 1899 ses_publish_cache(enc_softc_t *enc, struct enc_fsm_state *state, 1900 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 1901 { 1902 1903 sx_xlock(&enc->enc_cache_lock); 1904 ses_cache_clone(enc, /*src*/&enc->enc_daemon_cache, 1905 /*dst*/&enc->enc_cache); 1906 sx_xunlock(&enc->enc_cache_lock); 1907 1908 return (0); 1909 } 1910 1911 /** 1912 * \brief Parse the descriptors for each object. 1913 * 1914 * \param enc The SES softc to update. 1915 * \param buf The buffer containing the descriptor list response. 1916 * \param xfer_len Size of the buffer. 1917 * 1918 * \return 0 on success, errno otherwise. 1919 */ 1920 static int 1921 ses_process_elm_descs(enc_softc_t *enc, struct enc_fsm_state *state, 1922 union ccb *ccb, uint8_t **bufp, int error, int xfer_len) 1923 { 1924 ses_softc_t *ses; 1925 struct ses_iterator iter; 1926 enc_element_t *element; 1927 int err; 1928 int offset; 1929 u_long length, plength; 1930 enc_cache_t *enc_cache; 1931 ses_cache_t *ses_cache; 1932 uint8_t *buf; 1933 ses_element_t *elmpriv; 1934 const struct ses_page_hdr *phdr; 1935 const struct ses_elm_desc_hdr *hdr; 1936 1937 ses = enc->enc_private; 1938 enc_cache = &enc->enc_daemon_cache; 1939 ses_cache = enc_cache->private; 1940 buf = *bufp; 1941 err = -1; 1942 1943 if (error != 0) { 1944 err = error; 1945 goto out; 1946 } 1947 ses_cache_free_elm_descs(enc, enc_cache); 1948 ses_cache->elm_descs_page = (struct ses_elem_descr_page *)buf; 1949 *bufp = NULL; 1950 1951 phdr = &ses_cache->elm_descs_page->hdr; 1952 plength = ses_page_length(phdr); 1953 if (xfer_len < sizeof(struct ses_page_hdr)) { 1954 ENC_VLOG(enc, "Runt Element Descriptor Page\n"); 1955 goto out; 1956 } 1957 if (plength > xfer_len) { 1958 ENC_VLOG(enc, "Element Descriptor Page Too Long\n"); 1959 goto out; 1960 } 1961 1962 if (!ses_config_cache_valid(ses_cache, phdr->gen_code)) { 1963 ENC_VLOG(enc, "%s: Generation count change detected\n", 1964 __func__); 1965 enc_update_request(enc, SES_UPDATE_GETCONFIG); 1966 goto out; 1967 } 1968 1969 offset = sizeof(struct ses_page_hdr); 1970 1971 ses_iter_init(enc, enc_cache, &iter); 1972 while (offset < plength 1973 && (element = ses_iter_next(&iter)) != NULL) { 1974 1975 if ((offset + sizeof(struct ses_elm_desc_hdr)) > plength) { 1976 ENC_VLOG(enc, "Element %d Descriptor Header Past " 1977 "End of Buffer\n", iter.global_element_index); 1978 goto out; 1979 } 1980 hdr = (struct ses_elm_desc_hdr *)&buf[offset]; 1981 length = scsi_2btoul(hdr->length); 1982 ENC_DLOG(enc, "%s: obj %d(%d,%d) length=%d off=%d\n", __func__, 1983 iter.global_element_index, iter.type_index, 1984 iter.type_element_index, length, offset); 1985 if ((offset + sizeof(*hdr) + length) > plength) { 1986 ENC_VLOG(enc, "Element%d Descriptor Past " 1987 "End of Buffer\n", iter.global_element_index); 1988 goto out; 1989 } 1990 offset += sizeof(*hdr); 1991 1992 if (length > 0) { 1993 elmpriv = element->elm_private; 1994 elmpriv->descr_len = length; 1995 elmpriv->descr = &buf[offset]; 1996 } 1997 1998 /* skip over the descriptor itself */ 1999 offset += length; 2000 } 2001 2002 err = 0; 2003 out: 2004 if (err == 0) { 2005 if (ses->ses_flags & SES_FLAG_ADDLSTATUS) 2006 enc_update_request(enc, SES_UPDATE_GETELMADDLSTATUS); 2007 } 2008 enc_update_request(enc, SES_PUBLISH_CACHE); 2009 return (err); 2010 } 2011 2012 static int 2013 ses_fill_rcv_diag_io(enc_softc_t *enc, struct enc_fsm_state *state, 2014 union ccb *ccb, uint8_t *buf) 2015 { 2016 2017 if (enc->enc_type == ENC_SEMB_SES) { 2018 semb_receive_diagnostic_results(&ccb->ataio, /*retries*/5, 2019 NULL, MSG_SIMPLE_Q_TAG, /*pcv*/1, 2020 state->page_code, buf, state->buf_size, 2021 state->timeout); 2022 } else { 2023 scsi_receive_diagnostic_results(&ccb->csio, /*retries*/5, 2024 NULL, MSG_SIMPLE_Q_TAG, /*pcv*/1, 2025 state->page_code, buf, state->buf_size, 2026 SSD_FULL_SIZE, state->timeout); 2027 } 2028 return (0); 2029 } 2030 2031 /** 2032 * \brief Encode the object status into the response buffer, which is 2033 * expected to contain the current enclosure status. This function 2034 * turns off all the 'select' bits for the objects except for the 2035 * object specified, then sends it back to the enclosure. 2036 * 2037 * \param enc SES enclosure the change is being applied to. 2038 * \param buf Buffer containing the current enclosure status response. 2039 * \param amt Length of the response in the buffer. 2040 * \param req The control request to be applied to buf. 2041 * 2042 * \return 0 on success, errno otherwise. 2043 */ 2044 static int 2045 ses_encode(enc_softc_t *enc, uint8_t *buf, int amt, ses_control_request_t *req) 2046 { 2047 struct ses_iterator iter; 2048 enc_element_t *element; 2049 int offset; 2050 struct ses_control_page_hdr *hdr; 2051 2052 ses_iter_init(enc, &enc->enc_cache, &iter); 2053 hdr = (struct ses_control_page_hdr *)buf; 2054 if (req->elm_idx == -1) { 2055 /* for enclosure status, at least 2 bytes are needed */ 2056 if (amt < 2) 2057 return EIO; 2058 hdr->control_flags = 2059 req->elm_stat.comstatus & SES_SET_STATUS_MASK; 2060 ENC_DLOG(enc, "Set EncStat %x\n", hdr->control_flags); 2061 return (0); 2062 } 2063 2064 element = ses_iter_seek_to(&iter, req->elm_idx, SES_ELEM_INDEX_GLOBAL); 2065 if (element == NULL) 2066 return (ENXIO); 2067 2068 /* 2069 * Seek to the type set that corresponds to the requested object. 2070 * The +1 is for the overall status element for the type. 2071 */ 2072 offset = sizeof(struct ses_control_page_hdr) 2073 + (iter.global_element_index * sizeof(struct ses_comstat)); 2074 2075 /* Check for buffer overflow. */ 2076 if (offset + sizeof(struct ses_comstat) > amt) 2077 return (EIO); 2078 2079 /* Set the status. */ 2080 memcpy(&buf[offset], &req->elm_stat, sizeof(struct ses_comstat)); 2081 2082 ENC_DLOG(enc, "Set Type 0x%x Obj 0x%x (offset %d) with %x %x %x %x\n", 2083 iter.type_index, iter.global_element_index, offset, 2084 req->elm_stat.comstatus, req->elm_stat.comstat[0], 2085 req->elm_stat.comstat[1], req->elm_stat.comstat[2]); 2086 2087 return (0); 2088 } 2089 2090 static int 2091 ses_fill_control_request(enc_softc_t *enc, struct enc_fsm_state *state, 2092 union ccb *ccb, uint8_t *buf) 2093 { 2094 ses_softc_t *ses; 2095 enc_cache_t *enc_cache; 2096 ses_cache_t *ses_cache; 2097 struct ses_control_page_hdr *hdr; 2098 ses_control_request_t *req; 2099 size_t plength; 2100 size_t offset; 2101 2102 ses = enc->enc_private; 2103 enc_cache = &enc->enc_daemon_cache; 2104 ses_cache = enc_cache->private; 2105 hdr = (struct ses_control_page_hdr *)buf; 2106 2107 if (ses_cache->status_page == NULL) { 2108 ses_terminate_control_requests(&ses->ses_requests, EIO); 2109 return (EIO); 2110 } 2111 2112 plength = ses_page_length(&ses_cache->status_page->hdr); 2113 memcpy(buf, ses_cache->status_page, plength); 2114 2115 /* Disable the select bits in all status entries. */ 2116 offset = sizeof(struct ses_control_page_hdr); 2117 for (offset = sizeof(struct ses_control_page_hdr); 2118 offset < plength; offset += sizeof(struct ses_comstat)) { 2119 buf[offset] &= ~SESCTL_CSEL; 2120 } 2121 2122 /* And make sure the INVOP bit is clear. */ 2123 hdr->control_flags &= ~SES_ENCSTAT_INVOP; 2124 2125 /* Apply incoming requests. */ 2126 while ((req = TAILQ_FIRST(&ses->ses_requests)) != NULL) { 2127 2128 TAILQ_REMOVE(&ses->ses_requests, req, links); 2129 req->result = ses_encode(enc, buf, plength, req); 2130 if (req->result != 0) { 2131 wakeup(req); 2132 continue; 2133 } 2134 TAILQ_INSERT_TAIL(&ses->ses_pending_requests, req, links); 2135 } 2136 2137 if (TAILQ_EMPTY(&ses->ses_pending_requests) != 0) 2138 return (ENOENT); 2139 2140 /* Fill out the ccb */ 2141 if (enc->enc_type == ENC_SEMB_SES) { 2142 semb_send_diagnostic(&ccb->ataio, /*retries*/5, NULL, 2143 MSG_SIMPLE_Q_TAG, 2144 buf, ses_page_length(&ses_cache->status_page->hdr), 2145 state->timeout); 2146 } else { 2147 scsi_send_diagnostic(&ccb->csio, /*retries*/5, NULL, 2148 MSG_SIMPLE_Q_TAG, /*unit_offline*/0, 2149 /*device_offline*/0, /*self_test*/0, 2150 /*page_format*/1, /*self_test_code*/0, 2151 buf, ses_page_length(&ses_cache->status_page->hdr), 2152 SSD_FULL_SIZE, state->timeout); 2153 } 2154 return (0); 2155 } 2156 2157 static int 2158 ses_get_elm_addlstatus_fc(enc_softc_t *enc, enc_cache_t *enc_cache, 2159 uint8_t *buf, int bufsiz) 2160 { 2161 ENC_VLOG(enc, "FC Device Support Stubbed in Additional Status Page\n"); 2162 return (ENODEV); 2163 } 2164 2165 #define SES_PRINT_PORTS(p, type) do { \ 2166 sbuf_printf(sbp, " %s(", type); \ 2167 if (((p) & SES_SASOBJ_DEV_PHY_PROTOMASK) == 0) \ 2168 sbuf_printf(sbp, " None"); \ 2169 else { \ 2170 if ((p) & SES_SASOBJ_DEV_PHY_SMP) \ 2171 sbuf_printf(sbp, " SMP"); \ 2172 if ((p) & SES_SASOBJ_DEV_PHY_STP) \ 2173 sbuf_printf(sbp, " STP"); \ 2174 if ((p) & SES_SASOBJ_DEV_PHY_SSP) \ 2175 sbuf_printf(sbp, " SSP"); \ 2176 } \ 2177 sbuf_printf(sbp, " )"); \ 2178 } while(0) 2179 2180 /** 2181 * \brief Print the additional element status data for this object, for SAS 2182 * type 0 objects. See SES2 r20 Section 6.1.13.3.2. 2183 * 2184 * \param sesname SES device name associated with the object. 2185 * \param sbp Sbuf to print to. 2186 * \param obj The object to print the data for. 2187 * \param periph_name Peripheral string associated with the object. 2188 */ 2189 static void 2190 ses_print_addl_data_sas_type0(char *sesname, struct sbuf *sbp, 2191 enc_element_t *obj, char *periph_name) 2192 { 2193 int i; 2194 ses_element_t *elmpriv; 2195 struct ses_addl_status *addl; 2196 struct ses_elm_sas_device_phy *phy; 2197 2198 elmpriv = obj->elm_private; 2199 addl = &(elmpriv->addl); 2200 if (addl->proto_hdr.sas == NULL) 2201 return; 2202 sbuf_printf(sbp, "%s: %s: SAS Device Slot Element:", 2203 sesname, periph_name); 2204 sbuf_printf(sbp, " %d Phys", addl->proto_hdr.sas->base_hdr.num_phys); 2205 if (ses_elm_addlstatus_eip(addl->hdr)) 2206 sbuf_printf(sbp, " at Slot %d", 2207 addl->proto_hdr.sas->type0_eip.dev_slot_num); 2208 if (ses_elm_sas_type0_not_all_phys(addl->proto_hdr.sas)) 2209 sbuf_printf(sbp, ", Not All Phys"); 2210 sbuf_printf(sbp, "\n"); 2211 if (addl->proto_data.sasdev_phys == NULL) 2212 return; 2213 for (i = 0;i < addl->proto_hdr.sas->base_hdr.num_phys;i++) { 2214 phy = &addl->proto_data.sasdev_phys[i]; 2215 sbuf_printf(sbp, "%s: phy %d:", sesname, i); 2216 if (ses_elm_sas_dev_phy_sata_dev(phy)) 2217 /* Spec says all other fields are specific values */ 2218 sbuf_printf(sbp, " SATA device\n"); 2219 else { 2220 sbuf_printf(sbp, " SAS device type %d id %d\n", 2221 ses_elm_sas_dev_phy_dev_type(phy), phy->phy_id); 2222 sbuf_printf(sbp, "%s: phy %d: protocols:", sesname, i); 2223 SES_PRINT_PORTS(phy->initiator_ports, "Initiator"); 2224 SES_PRINT_PORTS(phy->target_ports, "Target"); 2225 sbuf_printf(sbp, "\n"); 2226 } 2227 sbuf_printf(sbp, "%s: phy %d: parent %jx addr %jx\n", 2228 sesname, i, 2229 (uintmax_t)scsi_8btou64(phy->parent_addr), 2230 (uintmax_t)scsi_8btou64(phy->phy_addr)); 2231 } 2232 } 2233 #undef SES_PRINT_PORTS 2234 2235 /** 2236 * \brief Report whether a given enclosure object is an expander. 2237 * 2238 * \param enc SES softc associated with object. 2239 * \param obj Enclosure object to report for. 2240 * 2241 * \return 1 if true, 0 otherwise. 2242 */ 2243 static int 2244 ses_obj_is_expander(enc_softc_t *enc, enc_element_t *obj) 2245 { 2246 return (obj->enctype == ELMTYP_SAS_EXP); 2247 } 2248 2249 /** 2250 * \brief Print the additional element status data for this object, for SAS 2251 * type 1 objects. See SES2 r20 Sections 6.1.13.3.3 and 6.1.13.3.4. 2252 * 2253 * \param enc SES enclosure, needed for type identification. 2254 * \param sesname SES device name associated with the object. 2255 * \param sbp Sbuf to print to. 2256 * \param obj The object to print the data for. 2257 * \param periph_name Peripheral string associated with the object. 2258 */ 2259 static void 2260 ses_print_addl_data_sas_type1(enc_softc_t *enc, char *sesname, 2261 struct sbuf *sbp, enc_element_t *obj, char *periph_name) 2262 { 2263 int i, num_phys; 2264 ses_element_t *elmpriv; 2265 struct ses_addl_status *addl; 2266 struct ses_elm_sas_expander_phy *exp_phy; 2267 struct ses_elm_sas_port_phy *port_phy; 2268 2269 elmpriv = obj->elm_private; 2270 addl = &(elmpriv->addl); 2271 if (addl->proto_hdr.sas == NULL) 2272 return; 2273 sbuf_printf(sbp, "%s: %s: SAS ", sesname, periph_name); 2274 if (ses_obj_is_expander(enc, obj)) { 2275 num_phys = addl->proto_hdr.sas->base_hdr.num_phys; 2276 sbuf_printf(sbp, "Expander: %d Phys", num_phys); 2277 if (addl->proto_data.sasexp_phys == NULL) 2278 return; 2279 for (i = 0;i < num_phys;i++) { 2280 exp_phy = &addl->proto_data.sasexp_phys[i]; 2281 sbuf_printf(sbp, "%s: phy %d: connector %d other %d\n", 2282 sesname, i, exp_phy->connector_index, 2283 exp_phy->other_index); 2284 } 2285 } else { 2286 num_phys = addl->proto_hdr.sas->base_hdr.num_phys; 2287 sbuf_printf(sbp, "Port: %d Phys", num_phys); 2288 if (addl->proto_data.sasport_phys == NULL) 2289 return; 2290 for (i = 0;i < num_phys;i++) { 2291 port_phy = &addl->proto_data.sasport_phys[i]; 2292 sbuf_printf(sbp, 2293 "%s: phy %d: id %d connector %d other %d\n", 2294 sesname, i, port_phy->phy_id, 2295 port_phy->connector_index, port_phy->other_index); 2296 sbuf_printf(sbp, "%s: phy %d: addr %jx\n", sesname, i, 2297 (uintmax_t)scsi_8btou64(port_phy->phy_addr)); 2298 } 2299 } 2300 } 2301 2302 /** 2303 * \brief Print the additional element status data for this object. 2304 * 2305 * \param enc SES softc associated with the object. 2306 * \param obj The object to print the data for. 2307 */ 2308 static void 2309 ses_print_addl_data(enc_softc_t *enc, enc_element_t *obj) 2310 { 2311 ses_element_t *elmpriv; 2312 struct ses_addl_status *addl; 2313 struct sbuf sesname, name, out; 2314 2315 elmpriv = obj->elm_private; 2316 if (elmpriv == NULL) 2317 return; 2318 2319 addl = &(elmpriv->addl); 2320 if (addl->hdr == NULL) 2321 return; 2322 2323 sbuf_new(&sesname, NULL, 16, SBUF_AUTOEXTEND); 2324 sbuf_new(&name, NULL, 16, SBUF_AUTOEXTEND); 2325 sbuf_new(&out, NULL, 512, SBUF_AUTOEXTEND); 2326 ses_paths_iter(enc, obj, ses_elmdevname_callback, &name); 2327 if (sbuf_len(&name) == 0) 2328 sbuf_printf(&name, "(none)"); 2329 sbuf_finish(&name); 2330 sbuf_printf(&sesname, "%s%d", enc->periph->periph_name, 2331 enc->periph->unit_number); 2332 sbuf_finish(&sesname); 2333 if (elmpriv->descr != NULL) 2334 sbuf_printf(&out, "%s: %s: Element descriptor: '%s'\n", 2335 sbuf_data(&sesname), sbuf_data(&name), elmpriv->descr); 2336 switch(ses_elm_addlstatus_proto(addl->hdr)) { 2337 case SPSP_PROTO_SAS: 2338 switch(ses_elm_sas_descr_type(addl->proto_hdr.sas)) { 2339 case SES_SASOBJ_TYPE_SLOT: 2340 ses_print_addl_data_sas_type0(sbuf_data(&sesname), 2341 &out, obj, sbuf_data(&name)); 2342 break; 2343 case SES_SASOBJ_TYPE_OTHER: 2344 ses_print_addl_data_sas_type1(enc, sbuf_data(&sesname), 2345 &out, obj, sbuf_data(&name)); 2346 break; 2347 default: 2348 break; 2349 } 2350 break; 2351 case SPSP_PROTO_FC: /* stubbed for now */ 2352 break; 2353 default: 2354 break; 2355 } 2356 sbuf_finish(&out); 2357 printf("%s", sbuf_data(&out)); 2358 sbuf_delete(&out); 2359 sbuf_delete(&name); 2360 sbuf_delete(&sesname); 2361 } 2362 2363 /** 2364 * \brief Update the softc with the additional element status data for this 2365 * object, for SAS type 0 objects. 2366 * 2367 * \param enc SES softc to be updated. 2368 * \param buf The additional element status response buffer. 2369 * \param bufsiz Size of the response buffer. 2370 * \param eip The EIP bit value. 2371 * \param nobj Number of objects attached to the SES softc. 2372 * 2373 * \return 0 on success, errno otherwise. 2374 */ 2375 static int 2376 ses_get_elm_addlstatus_sas_type0(enc_softc_t *enc, enc_cache_t *enc_cache, 2377 uint8_t *buf, int bufsiz, int eip, int nobj) 2378 { 2379 int err, offset, physz; 2380 enc_element_t *obj; 2381 ses_element_t *elmpriv; 2382 struct ses_addl_status *addl; 2383 2384 err = offset = 0; 2385 2386 /* basic object setup */ 2387 obj = &(enc_cache->elm_map[nobj]); 2388 elmpriv = obj->elm_private; 2389 addl = &(elmpriv->addl); 2390 2391 addl->proto_hdr.sas = (union ses_elm_sas_hdr *)&buf[offset]; 2392 2393 /* Don't assume this object has any phys */ 2394 bzero(&addl->proto_data, sizeof(addl->proto_data)); 2395 if (addl->proto_hdr.sas->base_hdr.num_phys == 0) 2396 goto out; 2397 2398 /* Skip forward to the phy list */ 2399 if (eip) 2400 offset += sizeof(struct ses_elm_sas_type0_eip_hdr); 2401 else 2402 offset += sizeof(struct ses_elm_sas_type0_base_hdr); 2403 2404 /* Make sure the phy list fits in the buffer */ 2405 physz = addl->proto_hdr.sas->base_hdr.num_phys; 2406 physz *= sizeof(struct ses_elm_sas_device_phy); 2407 if (physz > (bufsiz - offset + 4)) { 2408 ENC_VLOG(enc, "Element %d Device Phy List Beyond End Of Buffer\n", 2409 nobj); 2410 err = EIO; 2411 goto out; 2412 } 2413 2414 /* Point to the phy list */ 2415 addl->proto_data.sasdev_phys = 2416 (struct ses_elm_sas_device_phy *)&buf[offset]; 2417 2418 out: 2419 return (err); 2420 } 2421 2422 /** 2423 * \brief Update the softc with the additional element status data for this 2424 * object, for SAS type 1 objects. 2425 * 2426 * \param enc SES softc to be updated. 2427 * \param buf The additional element status response buffer. 2428 * \param bufsiz Size of the response buffer. 2429 * \param eip The EIP bit value. 2430 * \param nobj Number of objects attached to the SES softc. 2431 * 2432 * \return 0 on success, errno otherwise. 2433 */ 2434 static int 2435 ses_get_elm_addlstatus_sas_type1(enc_softc_t *enc, enc_cache_t *enc_cache, 2436 uint8_t *buf, int bufsiz, int eip, int nobj) 2437 { 2438 int err, offset, physz; 2439 enc_element_t *obj; 2440 ses_element_t *elmpriv; 2441 struct ses_addl_status *addl; 2442 2443 err = offset = 0; 2444 2445 /* basic object setup */ 2446 obj = &(enc_cache->elm_map[nobj]); 2447 elmpriv = obj->elm_private; 2448 addl = &(elmpriv->addl); 2449 2450 addl->proto_hdr.sas = (union ses_elm_sas_hdr *)&buf[offset]; 2451 2452 /* Don't assume this object has any phys */ 2453 bzero(&addl->proto_data, sizeof(addl->proto_data)); 2454 if (addl->proto_hdr.sas->base_hdr.num_phys == 0) 2455 goto out; 2456 2457 /* Process expanders differently from other type1 cases */ 2458 if (ses_obj_is_expander(enc, obj)) { 2459 offset += sizeof(struct ses_elm_sas_type1_expander_hdr); 2460 physz = addl->proto_hdr.sas->base_hdr.num_phys * 2461 sizeof(struct ses_elm_sas_expander_phy); 2462 if (physz > (bufsiz - offset)) { 2463 ENC_VLOG(enc, "Element %d: Expander Phy List Beyond " 2464 "End Of Buffer\n", nobj); 2465 err = EIO; 2466 goto out; 2467 } 2468 addl->proto_data.sasexp_phys = 2469 (struct ses_elm_sas_expander_phy *)&buf[offset]; 2470 } else { 2471 offset += sizeof(struct ses_elm_sas_type1_nonexpander_hdr); 2472 physz = addl->proto_hdr.sas->base_hdr.num_phys * 2473 sizeof(struct ses_elm_sas_port_phy); 2474 if (physz > (bufsiz - offset + 4)) { 2475 ENC_VLOG(enc, "Element %d: Port Phy List Beyond End " 2476 "Of Buffer\n", nobj); 2477 err = EIO; 2478 goto out; 2479 } 2480 addl->proto_data.sasport_phys = 2481 (struct ses_elm_sas_port_phy *)&buf[offset]; 2482 } 2483 2484 out: 2485 return (err); 2486 } 2487 2488 /** 2489 * \brief Update the softc with the additional element status data for this 2490 * object, for SAS objects. 2491 * 2492 * \param enc SES softc to be updated. 2493 * \param buf The additional element status response buffer. 2494 * \param bufsiz Size of the response buffer. 2495 * \param eip The EIP bit value. 2496 * \param tidx Type index for this object. 2497 * \param nobj Number of objects attached to the SES softc. 2498 * 2499 * \return 0 on success, errno otherwise. 2500 */ 2501 static int 2502 ses_get_elm_addlstatus_sas(enc_softc_t *enc, enc_cache_t *enc_cache, 2503 uint8_t *buf, int bufsiz, int eip, int tidx, 2504 int nobj) 2505 { 2506 int dtype, err; 2507 ses_cache_t *ses_cache; 2508 union ses_elm_sas_hdr *hdr; 2509 2510 /* Need to be able to read the descriptor type! */ 2511 if (bufsiz < sizeof(union ses_elm_sas_hdr)) { 2512 err = EIO; 2513 goto out; 2514 } 2515 2516 ses_cache = enc_cache->private; 2517 2518 hdr = (union ses_elm_sas_hdr *)buf; 2519 dtype = ses_elm_sas_descr_type(hdr); 2520 switch(dtype) { 2521 case SES_SASOBJ_TYPE_SLOT: 2522 switch(ses_cache->ses_types[tidx].hdr->etype_elm_type) { 2523 case ELMTYP_DEVICE: 2524 case ELMTYP_ARRAY_DEV: 2525 break; 2526 default: 2527 ENC_VLOG(enc, "Element %d has Additional Status type 0, " 2528 "invalid for SES element type 0x%x\n", nobj, 2529 ses_cache->ses_types[tidx].hdr->etype_elm_type); 2530 err = ENODEV; 2531 goto out; 2532 } 2533 err = ses_get_elm_addlstatus_sas_type0(enc, enc_cache, 2534 buf, bufsiz, eip, 2535 nobj); 2536 break; 2537 case SES_SASOBJ_TYPE_OTHER: 2538 switch(ses_cache->ses_types[tidx].hdr->etype_elm_type) { 2539 case ELMTYP_SAS_EXP: 2540 case ELMTYP_SCSI_INI: 2541 case ELMTYP_SCSI_TGT: 2542 case ELMTYP_ESCC: 2543 break; 2544 default: 2545 ENC_VLOG(enc, "Element %d has Additional Status type 1, " 2546 "invalid for SES element type 0x%x\n", nobj, 2547 ses_cache->ses_types[tidx].hdr->etype_elm_type); 2548 err = ENODEV; 2549 goto out; 2550 } 2551 err = ses_get_elm_addlstatus_sas_type1(enc, enc_cache, buf, 2552 bufsiz, eip, nobj); 2553 break; 2554 default: 2555 ENC_VLOG(enc, "Element %d of type 0x%x has Additional Status " 2556 "of unknown type 0x%x\n", nobj, 2557 ses_cache->ses_types[tidx].hdr->etype_elm_type, dtype); 2558 err = ENODEV; 2559 break; 2560 } 2561 2562 out: 2563 return (err); 2564 } 2565 2566 static void 2567 ses_softc_invalidate(enc_softc_t *enc) 2568 { 2569 ses_softc_t *ses; 2570 2571 ses = enc->enc_private; 2572 ses_terminate_control_requests(&ses->ses_requests, ENXIO); 2573 } 2574 2575 static void 2576 ses_softc_cleanup(enc_softc_t *enc) 2577 { 2578 2579 ses_cache_free(enc, &enc->enc_cache); 2580 ses_cache_free(enc, &enc->enc_daemon_cache); 2581 ENC_FREE_AND_NULL(enc->enc_private); 2582 ENC_FREE_AND_NULL(enc->enc_cache.private); 2583 ENC_FREE_AND_NULL(enc->enc_daemon_cache.private); 2584 } 2585 2586 static int 2587 ses_init_enc(enc_softc_t *enc) 2588 { 2589 return (0); 2590 } 2591 2592 static int 2593 ses_get_enc_status(enc_softc_t *enc, int slpflag) 2594 { 2595 /* Automatically updated, caller checks enc_cache->encstat itself */ 2596 return (0); 2597 } 2598 2599 static int 2600 ses_set_enc_status(enc_softc_t *enc, uint8_t encstat, int slpflag) 2601 { 2602 ses_control_request_t req; 2603 ses_softc_t *ses; 2604 2605 ses = enc->enc_private; 2606 req.elm_idx = SES_SETSTATUS_ENC_IDX; 2607 req.elm_stat.comstatus = encstat & 0xf; 2608 2609 TAILQ_INSERT_TAIL(&ses->ses_requests, &req, links); 2610 enc_update_request(enc, SES_PROCESS_CONTROL_REQS); 2611 cam_periph_sleep(enc->periph, &req, PUSER, "encstat", 0); 2612 2613 return (req.result); 2614 } 2615 2616 static int 2617 ses_get_elm_status(enc_softc_t *enc, encioc_elm_status_t *elms, int slpflag) 2618 { 2619 unsigned int i = elms->elm_idx; 2620 2621 memcpy(elms->cstat, &enc->enc_cache.elm_map[i].encstat, 4); 2622 return (0); 2623 } 2624 2625 static int 2626 ses_set_elm_status(enc_softc_t *enc, encioc_elm_status_t *elms, int slpflag) 2627 { 2628 ses_control_request_t req; 2629 ses_softc_t *ses; 2630 2631 /* If this is clear, we don't do diddly. */ 2632 if ((elms->cstat[0] & SESCTL_CSEL) == 0) 2633 return (0); 2634 2635 ses = enc->enc_private; 2636 req.elm_idx = elms->elm_idx; 2637 memcpy(&req.elm_stat, elms->cstat, sizeof(req.elm_stat)); 2638 2639 TAILQ_INSERT_TAIL(&ses->ses_requests, &req, links); 2640 enc_update_request(enc, SES_PROCESS_CONTROL_REQS); 2641 cam_periph_sleep(enc->periph, &req, PUSER, "encstat", 0); 2642 2643 return (req.result); 2644 } 2645 2646 static int 2647 ses_get_elm_desc(enc_softc_t *enc, encioc_elm_desc_t *elmd) 2648 { 2649 int i = (int)elmd->elm_idx; 2650 ses_element_t *elmpriv; 2651 2652 /* Assume caller has already checked obj_id validity */ 2653 elmpriv = enc->enc_cache.elm_map[i].elm_private; 2654 /* object might not have a descriptor */ 2655 if (elmpriv == NULL || elmpriv->descr == NULL) { 2656 elmd->elm_desc_len = 0; 2657 return (0); 2658 } 2659 if (elmd->elm_desc_len > elmpriv->descr_len) 2660 elmd->elm_desc_len = elmpriv->descr_len; 2661 copyout(elmpriv->descr, elmd->elm_desc_str, elmd->elm_desc_len); 2662 return (0); 2663 } 2664 2665 /** 2666 * \brief Respond to ENCIOC_GETELMDEVNAME, providing a device name for the 2667 * given object id if one is available. 2668 * 2669 * \param enc SES softc to examine. 2670 * \param objdn ioctl structure to read/write device name info. 2671 * 2672 * \return 0 on success, errno otherwise. 2673 */ 2674 static int 2675 ses_get_elm_devnames(enc_softc_t *enc, encioc_elm_devnames_t *elmdn) 2676 { 2677 struct sbuf sb; 2678 int len; 2679 2680 len = elmdn->elm_names_size; 2681 if (len < 0) 2682 return (EINVAL); 2683 2684 cam_periph_unlock(enc->periph); 2685 sbuf_new(&sb, NULL, len, SBUF_FIXEDLEN); 2686 ses_paths_iter(enc, &enc->enc_cache.elm_map[elmdn->elm_idx], 2687 ses_elmdevname_callback, &sb); 2688 sbuf_finish(&sb); 2689 elmdn->elm_names_len = sbuf_len(&sb); 2690 copyout(sbuf_data(&sb), elmdn->elm_devnames, elmdn->elm_names_len + 1); 2691 cam_periph_lock(enc->periph); 2692 return (elmdn->elm_names_len > 0 ? 0 : ENODEV); 2693 } 2694 2695 /** 2696 * \brief Send a string to the primary subenclosure using the String Out 2697 * SES diagnostic page. 2698 * 2699 * \param enc SES enclosure to run the command on. 2700 * \param sstr SES string structure to operate on 2701 * \param ioc Ioctl being performed 2702 * 2703 * \return 0 on success, errno otherwise. 2704 */ 2705 static int 2706 ses_handle_string(enc_softc_t *enc, encioc_string_t *sstr, int ioc) 2707 { 2708 ses_softc_t *ses; 2709 enc_cache_t *enc_cache; 2710 ses_cache_t *ses_cache; 2711 const struct ses_enc_desc *enc_desc; 2712 int amt, payload, ret; 2713 char cdb[6]; 2714 char str[32]; 2715 char vendor[9]; 2716 char product[17]; 2717 char rev[5]; 2718 uint8_t *buf; 2719 size_t size, rsize; 2720 2721 ses = enc->enc_private; 2722 enc_cache = &enc->enc_daemon_cache; 2723 ses_cache = enc_cache->private; 2724 2725 /* Implement SES2r20 6.1.6 */ 2726 if (sstr->bufsiz > 0xffff) 2727 return (EINVAL); /* buffer size too large */ 2728 2729 if (ioc == ENCIOC_SETSTRING) { 2730 payload = sstr->bufsiz + 4; /* header for SEND DIAGNOSTIC */ 2731 amt = 0 - payload; 2732 buf = ENC_MALLOC(payload); 2733 if (buf == NULL) 2734 return ENOMEM; 2735 2736 ses_page_cdb(cdb, payload, 0, CAM_DIR_OUT); 2737 /* Construct the page request */ 2738 buf[0] = SesStringOut; 2739 buf[1] = 0; 2740 buf[2] = sstr->bufsiz >> 8; 2741 buf[3] = sstr->bufsiz & 0xff; 2742 memcpy(&buf[4], sstr->buf, sstr->bufsiz); 2743 } else if (ioc == ENCIOC_GETSTRING) { 2744 payload = sstr->bufsiz; 2745 amt = payload; 2746 ses_page_cdb(cdb, payload, SesStringIn, CAM_DIR_IN); 2747 buf = sstr->buf; 2748 } else if (ioc == ENCIOC_GETENCNAME) { 2749 if (ses_cache->ses_nsubencs < 1) 2750 return (ENODEV); 2751 enc_desc = ses_cache->subencs[0]; 2752 cam_strvis(vendor, enc_desc->vendor_id, 2753 sizeof(enc_desc->vendor_id), sizeof(vendor)); 2754 cam_strvis(product, enc_desc->product_id, 2755 sizeof(enc_desc->product_id), sizeof(product)); 2756 cam_strvis(rev, enc_desc->product_rev, 2757 sizeof(enc_desc->product_rev), sizeof(rev)); 2758 rsize = snprintf(str, sizeof(str), "%s %s %s", 2759 vendor, product, rev) + 1; 2760 if (rsize > sizeof(str)) 2761 rsize = sizeof(str); 2762 copyout(&rsize, &sstr->bufsiz, sizeof(rsize)); 2763 size = rsize; 2764 if (size > sstr->bufsiz) 2765 size = sstr->bufsiz; 2766 copyout(str, sstr->buf, size); 2767 return (size == rsize ? 0 : ENOMEM); 2768 } else if (ioc == ENCIOC_GETENCID) { 2769 if (ses_cache->ses_nsubencs < 1) 2770 return (ENODEV); 2771 enc_desc = ses_cache->subencs[0]; 2772 rsize = snprintf(str, sizeof(str), "%16jx", 2773 scsi_8btou64(enc_desc->logical_id)) + 1; 2774 if (rsize > sizeof(str)) 2775 rsize = sizeof(str); 2776 copyout(&rsize, &sstr->bufsiz, sizeof(rsize)); 2777 size = rsize; 2778 if (size > sstr->bufsiz) 2779 size = sstr->bufsiz; 2780 copyout(str, sstr->buf, size); 2781 return (size == rsize ? 0 : ENOMEM); 2782 } else 2783 return EINVAL; 2784 2785 ret = enc_runcmd(enc, cdb, 6, buf, &amt); 2786 if (ioc == ENCIOC_SETSTRING) 2787 ENC_FREE(buf); 2788 return ret; 2789 } 2790 2791 /** 2792 * \invariant Called with cam_periph mutex held. 2793 */ 2794 static void 2795 ses_poll_status(enc_softc_t *enc) 2796 { 2797 ses_softc_t *ses; 2798 2799 ses = enc->enc_private; 2800 enc_update_request(enc, SES_UPDATE_GETSTATUS); 2801 if (ses->ses_flags & SES_FLAG_DESC) 2802 enc_update_request(enc, SES_UPDATE_GETELMDESCS); 2803 if (ses->ses_flags & SES_FLAG_ADDLSTATUS) 2804 enc_update_request(enc, SES_UPDATE_GETELMADDLSTATUS); 2805 } 2806 2807 /** 2808 * \brief Notification received when CAM detects a new device in the 2809 * SCSI domain in which this SEP resides. 2810 * 2811 * \param enc SES enclosure instance. 2812 */ 2813 static void 2814 ses_device_found(enc_softc_t *enc) 2815 { 2816 ses_poll_status(enc); 2817 enc_update_request(enc, SES_PUBLISH_PHYSPATHS); 2818 } 2819 2820 static struct enc_vec ses_enc_vec = 2821 { 2822 .softc_invalidate = ses_softc_invalidate, 2823 .softc_cleanup = ses_softc_cleanup, 2824 .init_enc = ses_init_enc, 2825 .get_enc_status = ses_get_enc_status, 2826 .set_enc_status = ses_set_enc_status, 2827 .get_elm_status = ses_get_elm_status, 2828 .set_elm_status = ses_set_elm_status, 2829 .get_elm_desc = ses_get_elm_desc, 2830 .get_elm_devnames = ses_get_elm_devnames, 2831 .handle_string = ses_handle_string, 2832 .device_found = ses_device_found, 2833 .poll_status = ses_poll_status 2834 }; 2835 2836 /** 2837 * \brief Initialize a new SES instance. 2838 * 2839 * \param enc SES softc structure to set up the instance in. 2840 * \param doinit Do the initialization (see main driver). 2841 * 2842 * \return 0 on success, errno otherwise. 2843 */ 2844 int 2845 ses_softc_init(enc_softc_t *enc) 2846 { 2847 ses_softc_t *ses_softc; 2848 2849 CAM_DEBUG(enc->periph->path, CAM_DEBUG_SUBTRACE, 2850 ("entering enc_softc_init(%p)\n", enc)); 2851 2852 enc->enc_vec = ses_enc_vec; 2853 enc->enc_fsm_states = enc_fsm_states; 2854 2855 if (enc->enc_private == NULL) 2856 enc->enc_private = ENC_MALLOCZ(sizeof(ses_softc_t)); 2857 if (enc->enc_cache.private == NULL) 2858 enc->enc_cache.private = ENC_MALLOCZ(sizeof(ses_cache_t)); 2859 if (enc->enc_daemon_cache.private == NULL) 2860 enc->enc_daemon_cache.private = 2861 ENC_MALLOCZ(sizeof(ses_cache_t)); 2862 2863 if (enc->enc_private == NULL 2864 || enc->enc_cache.private == NULL 2865 || enc->enc_daemon_cache.private == NULL) { 2866 ENC_FREE_AND_NULL(enc->enc_private); 2867 ENC_FREE_AND_NULL(enc->enc_cache.private); 2868 ENC_FREE_AND_NULL(enc->enc_daemon_cache.private); 2869 return (ENOMEM); 2870 } 2871 2872 ses_softc = enc->enc_private; 2873 TAILQ_INIT(&ses_softc->ses_requests); 2874 TAILQ_INIT(&ses_softc->ses_pending_requests); 2875 2876 enc_update_request(enc, SES_UPDATE_PAGES); 2877 2878 // XXX: Move this to the FSM so it doesn't hang init 2879 if (0) (void) ses_set_timed_completion(enc, 1); 2880 2881 return (0); 2882 } 2883 2884