1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2013,2014 Ilya Bakulin <ilya@bakulin.de> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer, 12 * without modification, immediately at the beginning of the file. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 #include <sys/param.h> 30 #include <sys/bus.h> 31 #include <sys/endian.h> 32 #include <sys/systm.h> 33 #include <sys/types.h> 34 #include <sys/malloc.h> 35 #include <sys/kernel.h> 36 #include <sys/time.h> 37 #include <sys/conf.h> 38 #include <sys/fcntl.h> 39 #include <sys/interrupt.h> 40 #include <sys/sbuf.h> 41 #include <sys/stdarg.h> 42 43 #include <sys/lock.h> 44 #include <sys/mutex.h> 45 #include <sys/sysctl.h> 46 #include <sys/condvar.h> 47 48 #include <cam/cam.h> 49 #include <cam/cam_ccb.h> 50 #include <cam/cam_queue.h> 51 #include <cam/cam_periph.h> 52 #include <cam/cam_sim.h> 53 #include <cam/cam_xpt.h> 54 #include <cam/cam_xpt_sim.h> 55 #include <cam/cam_xpt_periph.h> 56 #include <cam/cam_xpt_internal.h> 57 #include <cam/cam_debug.h> 58 59 #include <cam/mmc/mmc.h> 60 #include <cam/mmc/mmc_bus.h> 61 62 #include <machine/_inttypes.h> /* for PRIu64 */ 63 64 FEATURE(mmccam, "CAM-based MMC/SD/SDIO stack"); 65 66 static struct cam_ed * mmc_alloc_device(struct cam_eb *bus, 67 struct cam_et *target, lun_id_t lun_id); 68 static void mmc_dev_async(uint32_t async_code, struct cam_eb *bus, 69 struct cam_et *target, struct cam_ed *device, void *async_arg); 70 static void mmc_action(union ccb *start_ccb); 71 static void mmc_dev_advinfo(union ccb *start_ccb); 72 static void mmc_announce_periph_sbuf(struct cam_periph *periph, 73 struct sbuf *sb); 74 static void mmc_scan_lun(struct cam_periph *periph, 75 struct cam_path *path, cam_flags flags, union ccb *ccb); 76 77 /* mmcprobe methods */ 78 static cam_status mmcprobe_register(struct cam_periph *periph, void *arg); 79 static void mmcprobe_start(struct cam_periph *periph, union ccb *start_ccb); 80 static void mmcprobe_cleanup(struct cam_periph *periph); 81 static void mmcprobe_done(struct cam_periph *periph, union ccb *done_ccb); 82 83 static void mmc_proto_announce_sbuf(struct cam_ed *device, struct sbuf *sb); 84 static void mmc_proto_denounce_sbuf(struct cam_ed *device, struct sbuf *sb); 85 static void mmc_proto_debug_out(union ccb *ccb); 86 87 typedef enum { 88 PROBE_RESET, 89 PROBE_IDENTIFY, 90 PROBE_POWER_OFF, 91 PROBE_GET_HOST_OCR, 92 PROBE_RESET_BUS, 93 PROBE_SET_ID_FREQ, 94 PROBE_SET_CS, 95 PROBE_GO_IDLE_STATE, 96 PROBE_SDIO_RESET, 97 PROBE_SEND_IF_COND, 98 PROBE_SDIO_INIT, 99 PROBE_MMC_INIT, 100 PROBE_SEND_APP_OP_COND, 101 PROBE_GET_CID, 102 PROBE_GET_CSD, 103 PROBE_SEND_RELATIVE_ADDR, 104 PROBE_MMC_SET_RELATIVE_ADDR, 105 PROBE_SELECT_CARD, 106 PROBE_DONE, 107 PROBE_INVALID 108 } probe_action; 109 110 static char *probe_action_text[] = { 111 "PROBE_RESET", 112 "PROBE_IDENTIFY", 113 "PROBE_POWER_OFF", 114 "PROBE_GET_HOST_OCR", 115 "PROBE_RESET_BUS", 116 "PROBE_SET_ID_FREQ", 117 "PROBE_SET_CS", 118 "PROBE_GO_IDLE_STATE", 119 "PROBE_SDIO_RESET", 120 "PROBE_SEND_IF_COND", 121 "PROBE_SDIO_INIT", 122 "PROBE_MMC_INIT", 123 "PROBE_SEND_APP_OP_COND", 124 "PROBE_GET_CID", 125 "PROBE_GET_CSD", 126 "PROBE_SEND_RELATIVE_ADDR", 127 "PROBE_MMC_SET_RELATIVE_ADDR", 128 "PROBE_SELECT_CARD", 129 "PROBE_DONE", 130 "PROBE_INVALID" 131 }; 132 133 #define PROBE_SET_ACTION(softc, newaction) \ 134 do { \ 135 char **text; \ 136 text = probe_action_text; \ 137 CAM_DEBUG((softc)->periph->path, CAM_DEBUG_PROBE, \ 138 ("Probe %s to %s\n", text[(softc)->action], \ 139 text[(newaction)])); \ 140 (softc)->action = (newaction); \ 141 } while(0) 142 143 static struct xpt_xport_ops mmc_xport_ops = { 144 .alloc_device = mmc_alloc_device, 145 .action = mmc_action, 146 .async = mmc_dev_async, 147 .announce_sbuf = mmc_announce_periph_sbuf, 148 }; 149 150 #define MMC_XPT_XPORT(x, X) \ 151 static struct xpt_xport mmc_xport_ ## x = { \ 152 .xport = XPORT_ ## X, \ 153 .name = #x, \ 154 .ops = &mmc_xport_ops, \ 155 }; \ 156 CAM_XPT_XPORT(mmc_xport_ ## x); 157 158 MMC_XPT_XPORT(mmc, MMCSD); 159 160 static struct xpt_proto_ops mmc_proto_ops = { 161 .announce_sbuf = mmc_proto_announce_sbuf, 162 .denounce_sbuf = mmc_proto_denounce_sbuf, 163 .debug_out = mmc_proto_debug_out, 164 }; 165 166 static struct xpt_proto mmc_proto = { 167 .proto = PROTO_MMCSD, 168 .name = "mmcsd", 169 .ops = &mmc_proto_ops, 170 }; 171 CAM_XPT_PROTO(mmc_proto); 172 173 typedef struct { 174 probe_action action; 175 int restart; 176 uint32_t host_ocr; 177 uint32_t flags; 178 #define PROBE_FLAG_ACMD_SENT 0x1 /* CMD55 is sent, card expects ACMD */ 179 #define PROBE_FLAG_HOST_CAN_DO_18V 0x2 /* Host can do 1.8V signaling */ 180 uint8_t acmd41_count; /* how many times ACMD41 has been issued */ 181 struct cam_periph *periph; 182 } mmcprobe_softc; 183 184 /* XPort functions -- an interface to CAM at periph side */ 185 186 static struct cam_ed * 187 mmc_alloc_device(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id) 188 { 189 struct cam_ed *device; 190 191 device = xpt_alloc_device(bus, target, lun_id); 192 if (device == NULL) 193 return (NULL); 194 195 device->quirk = NULL; 196 device->mintags = 0; 197 device->maxtags = 0; 198 bzero(&device->inq_data, sizeof(device->inq_data)); 199 device->inq_flags = 0; 200 device->queue_flags = 0; 201 device->serial_num = NULL; 202 device->serial_num_len = 0; 203 return (device); 204 } 205 206 static void 207 mmc_dev_async(uint32_t async_code, struct cam_eb *bus, struct cam_et *target, 208 struct cam_ed *device, void *async_arg) 209 { 210 211 /* 212 * We only need to handle events for real devices. 213 */ 214 if (target->target_id == CAM_TARGET_WILDCARD 215 || device->lun_id == CAM_LUN_WILDCARD) 216 return; 217 218 if (async_code == AC_LOST_DEVICE && 219 (device->flags & CAM_DEV_UNCONFIGURED) == 0) { 220 device->flags |= CAM_DEV_UNCONFIGURED; 221 xpt_release_device(device); 222 } 223 } 224 225 /* Taken from nvme_scan_lun, thanks to bsdimp@ */ 226 static void 227 mmc_scan_lun(struct cam_periph *periph, struct cam_path *path, 228 cam_flags flags, union ccb *request_ccb) 229 { 230 struct ccb_pathinq cpi; 231 cam_status status; 232 struct cam_periph *old_periph; 233 int lock; 234 235 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("mmc_scan_lun\n")); 236 237 xpt_path_inq(&cpi, path); 238 239 if (cpi.ccb_h.status != CAM_REQ_CMP) { 240 if (request_ccb != NULL) { 241 request_ccb->ccb_h.status = cpi.ccb_h.status; 242 xpt_done(request_ccb); 243 } 244 return; 245 } 246 247 if (xpt_path_lun_id(path) == CAM_LUN_WILDCARD) { 248 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("mmd_scan_lun ignoring bus\n")); 249 request_ccb->ccb_h.status = CAM_REQ_CMP; /* XXX signal error ? */ 250 xpt_done(request_ccb); 251 return; 252 } 253 254 lock = (xpt_path_owned(path) == 0); 255 if (lock) 256 xpt_path_lock(path); 257 258 if ((old_periph = cam_periph_find(path, "mmcprobe")) != NULL) { 259 if ((old_periph->flags & CAM_PERIPH_INVALID) == 0) { 260 // mmcprobe_softc *softc; 261 // softc = (mmcprobe_softc *)old_periph->softc; 262 // Not sure if we need request ccb queue for mmc 263 // TAILQ_INSERT_TAIL(&softc->request_ccbs, 264 // &request_ccb->ccb_h, periph_links.tqe); 265 // softc->restart = 1; 266 CAM_DEBUG(path, CAM_DEBUG_INFO, 267 ("Got scan request, but mmcprobe already exists\n")); 268 request_ccb->ccb_h.status = CAM_REQ_CMP_ERR; 269 xpt_done(request_ccb); 270 } else { 271 request_ccb->ccb_h.status = CAM_REQ_CMP_ERR; 272 xpt_done(request_ccb); 273 } 274 } else { 275 CAM_DEBUG(path, CAM_DEBUG_INFO, 276 (" Set up the mmcprobe device...\n")); 277 278 status = cam_periph_alloc(mmcprobe_register, NULL, 279 mmcprobe_cleanup, 280 mmcprobe_start, 281 "mmcprobe", 282 CAM_PERIPH_BIO, 283 path, NULL, 0, 284 request_ccb); 285 if (status != CAM_REQ_CMP) { 286 xpt_print(path, 287 "xpt_scan_lun: cam_alloc_periph returned an error, can't continue probe\n"); 288 } 289 request_ccb->ccb_h.status = status; 290 xpt_done(request_ccb); 291 } 292 293 if (lock) 294 xpt_path_unlock(path); 295 } 296 297 static void 298 mmc_action(union ccb *start_ccb) 299 { 300 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_TRACE, 301 ("mmc_action! func_code=%x, action %s\n", start_ccb->ccb_h.func_code, 302 xpt_action_name(start_ccb->ccb_h.func_code))); 303 switch (start_ccb->ccb_h.func_code) { 304 case XPT_SCAN_BUS: 305 /* FALLTHROUGH */ 306 case XPT_SCAN_TGT: 307 /* FALLTHROUGH */ 308 case XPT_SCAN_LUN: 309 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_INFO, 310 ("XPT_SCAN_{BUS,TGT,LUN}\n")); 311 mmc_scan_lun(start_ccb->ccb_h.path->periph, 312 start_ccb->ccb_h.path, start_ccb->crcn.flags, 313 start_ccb); 314 break; 315 316 case XPT_DEV_ADVINFO: 317 { 318 mmc_dev_advinfo(start_ccb); 319 break; 320 } 321 322 default: 323 xpt_action_default(start_ccb); 324 break; 325 } 326 } 327 328 static void 329 mmc_dev_advinfo(union ccb *start_ccb) 330 { 331 struct cam_ed *device; 332 struct ccb_dev_advinfo *cdai; 333 off_t amt; 334 335 xpt_path_assert(start_ccb->ccb_h.path, MA_OWNED); 336 start_ccb->ccb_h.status = CAM_REQ_INVALID; 337 device = start_ccb->ccb_h.path->device; 338 cdai = &start_ccb->cdai; 339 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_TRACE, 340 ("%s: request %x\n", __func__, cdai->buftype)); 341 342 /* We don't support writing any data */ 343 if (cdai->flags & CDAI_FLAG_STORE) 344 panic("Attempt to store data?!"); 345 346 switch(cdai->buftype) { 347 case CDAI_TYPE_SCSI_DEVID: 348 cdai->provsiz = device->device_id_len; 349 if (device->device_id_len == 0) 350 break; 351 amt = MIN(cdai->provsiz, cdai->bufsiz); 352 memcpy(cdai->buf, device->device_id, amt); 353 break; 354 case CDAI_TYPE_SERIAL_NUM: 355 cdai->provsiz = device->serial_num_len; 356 if (device->serial_num_len == 0) 357 break; 358 amt = MIN(cdai->provsiz, cdai->bufsiz); 359 memcpy(cdai->buf, device->serial_num, amt); 360 break; 361 case CDAI_TYPE_PHYS_PATH: /* pass(4) wants this */ 362 cdai->provsiz = 0; 363 break; 364 case CDAI_TYPE_MMC_PARAMS: 365 cdai->provsiz = sizeof(struct mmc_params); 366 amt = MIN(cdai->provsiz, cdai->bufsiz); 367 memcpy(cdai->buf, &device->mmc_ident_data, amt); 368 break; 369 default: 370 panic("Unknown buftype"); 371 return; 372 } 373 start_ccb->ccb_h.status = CAM_REQ_CMP; 374 } 375 376 static void 377 mmc_announce_periph_sbuf(struct cam_periph *periph, struct sbuf *sb) 378 { 379 struct ccb_pathinq cpi; 380 struct ccb_trans_settings cts; 381 struct cam_path *path = periph->path; 382 383 cam_periph_assert(periph, MA_OWNED); 384 385 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("mmc_announce_periph_sbuf")); 386 387 memset(&cts, 0, sizeof(cts)); 388 xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NORMAL); 389 cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; 390 cts.type = CTS_TYPE_CURRENT_SETTINGS; 391 xpt_action((union ccb*)&cts); 392 if ((cts.ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) 393 return; 394 xpt_path_inq(&cpi, periph->path); 395 CAM_DEBUG(path, CAM_DEBUG_INFO, 396 ("XPT info: CLK %04d, ...\n", cts.proto_specific.mmc.ios.clock)); 397 } 398 399 void 400 mmccam_start_discovery(struct cam_sim *sim) 401 { 402 union ccb *ccb; 403 uint32_t pathid; 404 405 pathid = cam_sim_path(sim); 406 ccb = xpt_alloc_ccb(); 407 408 /* 409 * We create a rescan request for BUS:0:0, since the card 410 * will be at lun 0. 411 */ 412 if (xpt_create_path(&ccb->ccb_h.path, NULL, pathid, 413 /* target */ 0, /* lun */ 0) != CAM_REQ_CMP) { 414 xpt_free_ccb(ccb); 415 return; 416 } 417 418 KASSERT(xpt_path_sim_device(ccb->ccb_h.path) != NULL, 419 ("%s(%s): device is not initialized on sim's path", 420 __func__, cam_sim_name(sim))); 421 xpt_rescan(ccb); 422 } 423 424 /* This func is called per attached device :-( */ 425 static void 426 mmc_print_ident(struct mmc_params *ident_data, struct sbuf *sb) 427 { 428 bool space = false; 429 430 sbuf_printf(sb, "Relative addr: %08x\n", ident_data->card_rca); 431 sbuf_cat(sb, "Card features: <"); 432 if (ident_data->card_features & CARD_FEATURE_MMC) { 433 sbuf_cat(sb, "MMC"); 434 space = true; 435 } 436 if (ident_data->card_features & CARD_FEATURE_MEMORY) { 437 sbuf_printf(sb, "%sMemory", space ? " " : ""); 438 space = true; 439 } 440 if (ident_data->card_features & CARD_FEATURE_SDHC) { 441 sbuf_printf(sb, "%sHigh-Capacity", space ? " " : ""); 442 space = true; 443 } 444 if (ident_data->card_features & CARD_FEATURE_SD20) { 445 sbuf_printf(sb, "%sSD2.0-Conditions", space ? " " : ""); 446 space = true; 447 } 448 if (ident_data->card_features & CARD_FEATURE_SDIO) { 449 sbuf_printf(sb, "%sSDIO", space ? " " : ""); 450 space = true; 451 } 452 if (ident_data->card_features & CARD_FEATURE_18V) { 453 sbuf_printf(sb, "%s1.8-Signaling", space ? " " : ""); 454 } 455 sbuf_cat(sb, ">\n"); 456 457 if (ident_data->card_features & CARD_FEATURE_MEMORY) 458 sbuf_printf(sb, "Card memory OCR: %08x\n", 459 ident_data->card_ocr); 460 461 if (ident_data->card_features & CARD_FEATURE_SDIO) { 462 sbuf_printf(sb, "Card IO OCR: %08x\n", ident_data->io_ocr); 463 sbuf_printf(sb, "Number of functions: %u\n", 464 ident_data->sdio_func_count); 465 } 466 } 467 468 static void 469 mmc_proto_announce_sbuf(struct cam_ed *device, struct sbuf *sb) 470 { 471 mmc_print_ident(&device->mmc_ident_data, sb); 472 } 473 474 static void 475 mmc_proto_denounce_sbuf(struct cam_ed *device, struct sbuf *sb) 476 { 477 mmc_proto_announce_sbuf(device, sb); 478 } 479 480 static void 481 mmc_proto_debug_out(union ccb *ccb) 482 { 483 if (ccb->ccb_h.func_code != XPT_MMC_IO) 484 return; 485 486 CAM_DEBUG(ccb->ccb_h.path, 487 CAM_DEBUG_CDB,("mmc_proto_debug_out\n")); 488 } 489 490 static periph_init_t probe_periph_init; 491 492 static struct periph_driver probe_driver = 493 { 494 probe_periph_init, "mmcprobe", 495 TAILQ_HEAD_INITIALIZER(probe_driver.units), /* generation */ 0, 496 CAM_PERIPH_DRV_EARLY 497 }; 498 499 PERIPHDRIVER_DECLARE(mmcprobe, probe_driver); 500 501 #define CARD_ID_FREQUENCY 400000 /* Spec requires 400kHz max during ID phase. */ 502 503 static void 504 probe_periph_init(void) 505 { 506 } 507 508 static cam_status 509 mmcprobe_register(struct cam_periph *periph, void *arg) 510 { 511 mmcprobe_softc *softc; 512 union ccb *request_ccb; /* CCB representing the probe request */ 513 int status; 514 515 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("mmcprobe_register\n")); 516 517 request_ccb = (union ccb *)arg; 518 if (request_ccb == NULL) { 519 printf( 520 "mmcprobe_register: no probe CCB, can't register device\n"); 521 return(CAM_REQ_CMP_ERR); 522 } 523 524 softc = (mmcprobe_softc *)malloc(sizeof(*softc), M_CAMXPT, M_NOWAIT); 525 526 if (softc == NULL) { 527 printf( 528 "proberegister: Unable to probe new device. Unable to allocate softc\n"); 529 return(CAM_REQ_CMP_ERR); 530 } 531 532 softc->flags = 0; 533 softc->acmd41_count = 0; 534 periph->softc = softc; 535 softc->periph = periph; 536 softc->action = PROBE_INVALID; 537 softc->restart = 0; 538 status = cam_periph_acquire(periph); 539 540 memset(&periph->path->device->mmc_ident_data, 0, sizeof(struct mmc_params)); 541 if (status != 0) { 542 printf( 543 "proberegister: cam_periph_acquire failed (status=%d)\n", 544 status); 545 return (CAM_REQ_CMP_ERR); 546 } 547 CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("Probe started\n")); 548 549 if (periph->path->device->flags & CAM_DEV_UNCONFIGURED) 550 PROBE_SET_ACTION(softc, PROBE_RESET); 551 else 552 PROBE_SET_ACTION(softc, PROBE_IDENTIFY); 553 554 /* This will kick the ball */ 555 xpt_schedule(periph, CAM_PRIORITY_XPT); 556 557 return(CAM_REQ_CMP); 558 } 559 560 static int 561 mmc_highest_voltage(uint32_t ocr) 562 { 563 int i; 564 565 for (i = MMC_OCR_MAX_VOLTAGE_SHIFT; 566 i >= MMC_OCR_MIN_VOLTAGE_SHIFT; i--) 567 if (ocr & (1 << i)) 568 return (i); 569 return (-1); 570 } 571 572 static inline void 573 init_standard_ccb(union ccb *ccb, uint32_t cmd) 574 { 575 ccb->ccb_h.func_code = cmd; 576 ccb->ccb_h.flags = CAM_DIR_OUT; 577 ccb->ccb_h.retry_count = 0; 578 ccb->ccb_h.timeout = 15 * 1000; 579 ccb->ccb_h.cbfcnp = mmcprobe_done; 580 } 581 582 static void 583 mmcprobe_start(struct cam_periph *periph, union ccb *start_ccb) 584 { 585 mmcprobe_softc *softc; 586 struct cam_path *path; 587 struct ccb_mmcio *mmcio; 588 struct ccb_trans_settings_mmc *cts; 589 590 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("mmcprobe_start\n")); 591 softc = (mmcprobe_softc *)periph->softc; 592 path = start_ccb->ccb_h.path; 593 mmcio = &start_ccb->mmcio; 594 cts = &start_ccb->cts.proto_specific.mmc; 595 struct mmc_params *mmcp = &path->device->mmc_ident_data; 596 597 memset(&mmcio->cmd, 0, sizeof(struct mmc_command)); 598 599 if (softc->restart) { 600 softc->restart = 0; 601 if (path->device->flags & CAM_DEV_UNCONFIGURED) 602 softc->action = PROBE_RESET; 603 else 604 softc->action = PROBE_IDENTIFY; 605 } 606 607 /* Here is the place where the identify fun begins */ 608 switch (softc->action) { 609 case PROBE_RESET: 610 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Start with PROBE_RESET\n")); 611 /* FALLTHROUGH */ 612 case PROBE_IDENTIFY: 613 xpt_path_inq(&start_ccb->cpi, periph->path); 614 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Start with PROBE_IDENTIFY\n")); 615 init_standard_ccb(start_ccb, XPT_MMC_GET_TRAN_SETTINGS); 616 break; 617 618 case PROBE_POWER_OFF: 619 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("power off the card\n")); 620 init_standard_ccb(start_ccb, XPT_MMC_SET_TRAN_SETTINGS); 621 cts->ios.power_mode = power_off; 622 cts->ios_valid = MMC_PM; 623 break; 624 625 case PROBE_GET_HOST_OCR: 626 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("get the host ocr\n")); 627 init_standard_ccb(start_ccb, XPT_MMC_GET_TRAN_SETTINGS); 628 break; 629 630 case PROBE_RESET_BUS: 631 { 632 uint32_t host_caps = cts->host_caps; 633 if (host_caps & MMC_CAP_SIGNALING_180) 634 softc->flags |= PROBE_FLAG_HOST_CAN_DO_18V; 635 uint32_t hv = mmc_highest_voltage(softc->host_ocr); 636 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("reseting the bus\n")); 637 init_standard_ccb(start_ccb, XPT_MMC_SET_TRAN_SETTINGS); 638 cts->ios.vdd = hv; 639 cts->ios.bus_mode = opendrain; 640 cts->ios.chip_select = cs_dontcare; 641 cts->ios.power_mode = power_up; 642 cts->ios.bus_width = bus_width_1; 643 cts->ios.clock = 0; 644 cts->ios_valid = MMC_VDD | MMC_PM | MMC_BM | 645 MMC_CS | MMC_BW | MMC_CLK; 646 break; 647 } 648 649 case PROBE_SET_ID_FREQ: 650 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("setting the ID freq\n")); 651 init_standard_ccb(start_ccb, XPT_MMC_SET_TRAN_SETTINGS); 652 cts->ios.power_mode = power_on; 653 cts->ios.clock = CARD_ID_FREQUENCY; 654 cts->ios.timing = bus_timing_normal; 655 cts->ios_valid = MMC_PM | MMC_CLK | MMC_BT; 656 break; 657 658 case PROBE_SET_CS: 659 /* Begin mmc_idle_cards() */ 660 init_standard_ccb(start_ccb, XPT_MMC_SET_TRAN_SETTINGS); 661 cts->ios.chip_select = cs_high; 662 cts->ios_valid = MMC_CS; 663 break; 664 665 case PROBE_GO_IDLE_STATE: 666 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Send first XPT_MMC_IO\n")); 667 init_standard_ccb(start_ccb, XPT_MMC_IO); 668 mmcio->cmd.opcode = MMC_GO_IDLE_STATE; /* CMD 0 */ 669 mmcio->cmd.arg = 0; 670 mmcio->cmd.flags = MMC_RSP_NONE | MMC_CMD_BC; 671 mmcio->cmd.data = NULL; 672 mmcio->stop.opcode = 0; 673 674 /* XXX Reset I/O portion as well */ 675 break; 676 677 case PROBE_SDIO_RESET: 678 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, 679 ("Start with PROBE_SDIO_RESET\n")); 680 uint32_t mmc_arg = SD_IO_RW_ADR(SD_IO_CCCR_CTL) 681 | SD_IO_RW_DAT(CCCR_CTL_RES) | SD_IO_RW_WR | SD_IO_RW_RAW; 682 cam_fill_mmcio(&start_ccb->mmcio, 683 /*retries*/ 0, 684 /*cbfcnp*/ mmcprobe_done, 685 /*flags*/ CAM_DIR_NONE, 686 /*mmc_opcode*/ SD_IO_RW_DIRECT, 687 /*mmc_arg*/ mmc_arg, 688 /*mmc_flags*/ MMC_RSP_R5 | MMC_CMD_AC, 689 /*mmc_data*/ NULL, 690 /*timeout*/ 1000); 691 break; 692 case PROBE_SEND_IF_COND: 693 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, 694 ("Start with PROBE_SEND_IF_COND\n")); 695 init_standard_ccb(start_ccb, XPT_MMC_IO); 696 mmcio->cmd.opcode = SD_SEND_IF_COND; /* CMD 8 */ 697 mmcio->cmd.arg = (1 << 8) + 0xAA; 698 mmcio->cmd.flags = MMC_RSP_R7 | MMC_CMD_BCR; 699 mmcio->stop.opcode = 0; 700 break; 701 702 case PROBE_SDIO_INIT: 703 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, 704 ("Start with PROBE_SDIO_INIT\n")); 705 init_standard_ccb(start_ccb, XPT_MMC_IO); 706 mmcio->cmd.opcode = IO_SEND_OP_COND; /* CMD 5 */ 707 mmcio->cmd.arg = mmcp->io_ocr; 708 mmcio->cmd.flags = MMC_RSP_R4; 709 mmcio->stop.opcode = 0; 710 break; 711 712 case PROBE_MMC_INIT: 713 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, 714 ("Start with PROBE_MMC_INIT\n")); 715 init_standard_ccb(start_ccb, XPT_MMC_IO); 716 mmcio->cmd.opcode = MMC_SEND_OP_COND; /* CMD 1 */ 717 mmcio->cmd.arg = MMC_OCR_CCS | mmcp->card_ocr; /* CCS + ocr */; 718 mmcio->cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR; 719 mmcio->stop.opcode = 0; 720 break; 721 722 case PROBE_SEND_APP_OP_COND: 723 init_standard_ccb(start_ccb, XPT_MMC_IO); 724 if (softc->flags & PROBE_FLAG_ACMD_SENT) { 725 mmcio->cmd.opcode = ACMD_SD_SEND_OP_COND; /* CMD 41 */ 726 /* 727 * We set CCS bit because we do support SDHC cards. 728 * XXX: Don't set CCS if no response to CMD8. 729 */ 730 uint32_t cmd_arg = MMC_OCR_CCS | mmcp->card_ocr; /* CCS + ocr */ 731 if (softc->acmd41_count < 10 && mmcp->card_ocr != 0 ) 732 cmd_arg |= MMC_OCR_S18R; 733 mmcio->cmd.arg = cmd_arg; 734 mmcio->cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR; 735 softc->acmd41_count++; 736 } else { 737 mmcio->cmd.opcode = MMC_APP_CMD; /* CMD 55 */ 738 mmcio->cmd.arg = 0; /* rca << 16 */ 739 mmcio->cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; 740 } 741 mmcio->stop.opcode = 0; 742 break; 743 744 case PROBE_GET_CID: /* XXX move to mmc_da */ 745 init_standard_ccb(start_ccb, XPT_MMC_IO); 746 mmcio->cmd.opcode = MMC_ALL_SEND_CID; 747 mmcio->cmd.arg = 0; 748 mmcio->cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR; 749 mmcio->stop.opcode = 0; 750 break; 751 case PROBE_SEND_RELATIVE_ADDR: 752 init_standard_ccb(start_ccb, XPT_MMC_IO); 753 mmcio->cmd.opcode = SD_SEND_RELATIVE_ADDR; 754 mmcio->cmd.arg = 0; 755 mmcio->cmd.flags = MMC_RSP_R6 | MMC_CMD_BCR; 756 mmcio->stop.opcode = 0; 757 break; 758 case PROBE_MMC_SET_RELATIVE_ADDR: 759 init_standard_ccb(start_ccb, XPT_MMC_IO); 760 mmcio->cmd.opcode = MMC_SET_RELATIVE_ADDR; 761 mmcio->cmd.arg = MMC_PROPOSED_RCA << 16; 762 mmcio->cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; 763 mmcio->stop.opcode = 0; 764 break; 765 case PROBE_SELECT_CARD: 766 init_standard_ccb(start_ccb, XPT_MMC_IO); 767 mmcio->cmd.opcode = MMC_SELECT_CARD; 768 mmcio->cmd.arg = (uint32_t)path->device->mmc_ident_data.card_rca << 16; 769 mmcio->cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; 770 mmcio->stop.opcode = 0; 771 break; 772 case PROBE_GET_CSD: /* XXX move to mmc_da */ 773 init_standard_ccb(start_ccb, XPT_MMC_IO); 774 mmcio->cmd.opcode = MMC_SEND_CSD; 775 mmcio->cmd.arg = (uint32_t)path->device->mmc_ident_data.card_rca << 16; 776 mmcio->cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR; 777 mmcio->stop.opcode = 0; 778 break; 779 case PROBE_DONE: 780 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Start with PROBE_DONE\n")); 781 init_standard_ccb(start_ccb, XPT_SET_TRAN_SETTINGS); 782 cts->ios.bus_mode = pushpull; 783 cts->ios_valid = MMC_BM; 784 xpt_action(start_ccb); 785 return; 786 /* NOTREACHED */ 787 break; 788 case PROBE_INVALID: 789 break; 790 default: 791 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("probestart: invalid action state 0x%x\n", softc->action)); 792 panic("default: case in mmc_probe_start()"); 793 } 794 795 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE; 796 xpt_action(start_ccb); 797 } 798 799 static void mmcprobe_cleanup(struct cam_periph *periph) 800 { 801 free(periph->softc, M_CAMXPT); 802 } 803 804 static void 805 mmcprobe_done(struct cam_periph *periph, union ccb *done_ccb) 806 { 807 mmcprobe_softc *softc; 808 struct cam_path *path; 809 810 int err; 811 struct ccb_mmcio *mmcio; 812 uint32_t priority; 813 814 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("mmcprobe_done\n")); 815 softc = (mmcprobe_softc *)periph->softc; 816 path = done_ccb->ccb_h.path; 817 priority = done_ccb->ccb_h.pinfo.priority; 818 819 switch (softc->action) { 820 case PROBE_RESET: 821 /* FALLTHROUGH */ 822 case PROBE_IDENTIFY: 823 { 824 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("done with PROBE_RESET\n")); 825 PROBE_SET_ACTION(softc, PROBE_POWER_OFF); 826 break; 827 } 828 case PROBE_POWER_OFF: 829 { 830 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("done with PROBE_POWER_OFF\n")); 831 PROBE_SET_ACTION(softc, PROBE_GET_HOST_OCR); 832 break; 833 } 834 case PROBE_GET_HOST_OCR: 835 { 836 struct ccb_trans_settings_mmc *cts; 837 cts = &done_ccb->cts.proto_specific.mmc; 838 softc->host_ocr = cts->host_ocr; 839 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("done with PROBE_GET_HOST_OCR (Got OCR=%x\n", softc->host_ocr)); 840 PROBE_SET_ACTION(softc, PROBE_RESET_BUS); 841 break; 842 } 843 case PROBE_RESET_BUS: 844 { 845 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("done with PROBE_RESET_BUS\n")); 846 PROBE_SET_ACTION(softc, PROBE_SET_ID_FREQ); 847 break; 848 } 849 case PROBE_SET_ID_FREQ: 850 { 851 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("done with PROBE_SET_ID_FREQ\n")); 852 PROBE_SET_ACTION(softc, PROBE_SET_CS); 853 break; 854 } 855 case PROBE_SET_CS: 856 { 857 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("done with PROBE_SET_CS\n")); 858 PROBE_SET_ACTION(softc, PROBE_GO_IDLE_STATE); 859 break; 860 } 861 case PROBE_GO_IDLE_STATE: 862 { 863 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("done with PROBE_GO_IDLE_STATE\n")); 864 mmcio = &done_ccb->mmcio; 865 err = mmcio->cmd.error; 866 867 if (err != MMC_ERR_NONE) { 868 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 869 ("GO_IDLE_STATE failed with error %d\n", 870 err)); 871 872 /* There was a device there, but now it's gone... */ 873 if ((path->device->flags & CAM_DEV_UNCONFIGURED) == 0) { 874 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 875 ("Device lost!\n")); 876 877 xpt_async(AC_LOST_DEVICE, path, NULL); 878 } 879 PROBE_SET_ACTION(softc, PROBE_INVALID); 880 break; 881 } 882 path->device->protocol = PROTO_MMCSD; 883 PROBE_SET_ACTION(softc, PROBE_SEND_IF_COND); 884 break; 885 } 886 case PROBE_SEND_IF_COND: 887 { 888 mmcio = &done_ccb->mmcio; 889 err = mmcio->cmd.error; 890 struct mmc_params *mmcp = &path->device->mmc_ident_data; 891 892 if (err != MMC_ERR_NONE || mmcio->cmd.resp[0] != 0x1AA) { 893 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 894 ("IF_COND: error %d, pattern %08x\n", 895 err, mmcio->cmd.resp[0])); 896 } else { 897 mmcp->card_features |= CARD_FEATURE_SD20; 898 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 899 ("SD 2.0 interface conditions: OK\n")); 900 } 901 PROBE_SET_ACTION(softc, PROBE_SDIO_RESET); 902 break; 903 } 904 case PROBE_SDIO_RESET: 905 { 906 mmcio = &done_ccb->mmcio; 907 err = mmcio->cmd.error; 908 909 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 910 ("SDIO_RESET: error %d, CCCR CTL register: %08x\n", 911 err, mmcio->cmd.resp[0])); 912 PROBE_SET_ACTION(softc, PROBE_SDIO_INIT); 913 break; 914 } 915 case PROBE_SDIO_INIT: 916 { 917 mmcio = &done_ccb->mmcio; 918 err = mmcio->cmd.error; 919 struct mmc_params *mmcp = &path->device->mmc_ident_data; 920 921 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 922 ("SDIO_INIT: error %d, %08x %08x %08x %08x\n", 923 err, mmcio->cmd.resp[0], 924 mmcio->cmd.resp[1], 925 mmcio->cmd.resp[2], 926 mmcio->cmd.resp[3])); 927 928 /* 929 * Error here means that this card is not SDIO, 930 * so proceed with memory init as if nothing has happened 931 */ 932 if (err != MMC_ERR_NONE) { 933 PROBE_SET_ACTION(softc, PROBE_SEND_APP_OP_COND); 934 break; 935 } 936 mmcp->card_features |= CARD_FEATURE_SDIO; 937 uint32_t ioifcond = mmcio->cmd.resp[0]; 938 uint32_t io_ocr = ioifcond & R4_IO_OCR_MASK; 939 940 mmcp->sdio_func_count = R4_IO_NUM_FUNCTIONS(ioifcond); 941 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 942 ("SDIO card: %d functions\n", mmcp->sdio_func_count)); 943 if (io_ocr == 0) { 944 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 945 ("SDIO OCR invalid, retrying\n")); 946 break; /* Retry */ 947 } 948 949 if (io_ocr != 0 && mmcp->io_ocr == 0) { 950 mmcp->io_ocr = io_ocr; 951 break; /* Retry, this time with non-0 OCR */ 952 } 953 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 954 ("SDIO OCR: %08x\n", mmcp->io_ocr)); 955 956 if (ioifcond & R4_IO_MEM_PRESENT) { 957 /* Combo card -- proceed to memory initialization */ 958 PROBE_SET_ACTION(softc, PROBE_SEND_APP_OP_COND); 959 } else { 960 /* No memory portion -- get RCA and select card */ 961 PROBE_SET_ACTION(softc, PROBE_SEND_RELATIVE_ADDR); 962 } 963 break; 964 } 965 case PROBE_MMC_INIT: 966 { 967 mmcio = &done_ccb->mmcio; 968 err = mmcio->cmd.error; 969 struct mmc_params *mmcp = &path->device->mmc_ident_data; 970 971 if (err != MMC_ERR_NONE) { 972 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 973 ("MMC_INIT: error %d, resp %08x\n", 974 err, mmcio->cmd.resp[0])); 975 PROBE_SET_ACTION(softc, PROBE_INVALID); 976 break; 977 } 978 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 979 ("MMC card, OCR %08x\n", mmcio->cmd.resp[0])); 980 981 if (mmcp->card_ocr == 0) { 982 /* We haven't sent the OCR to the card yet -- do it */ 983 mmcp->card_ocr = mmcio->cmd.resp[0]; 984 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 985 ("-> sending OCR to card\n")); 986 break; 987 } 988 989 if (!(mmcio->cmd.resp[0] & MMC_OCR_CARD_BUSY)) { 990 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 991 ("Card is still powering up\n")); 992 break; 993 } 994 995 mmcp->card_features |= CARD_FEATURE_MMC | CARD_FEATURE_MEMORY; 996 PROBE_SET_ACTION(softc, PROBE_GET_CID); 997 break; 998 } 999 case PROBE_SEND_APP_OP_COND: 1000 { 1001 mmcio = &done_ccb->mmcio; 1002 err = mmcio->cmd.error; 1003 1004 if (err != MMC_ERR_NONE) { 1005 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1006 ("APP_OP_COND: error %d, resp %08x\n", 1007 err, mmcio->cmd.resp[0])); 1008 PROBE_SET_ACTION(softc, PROBE_MMC_INIT); 1009 break; 1010 } 1011 1012 if (!(softc->flags & PROBE_FLAG_ACMD_SENT)) { 1013 /* Don't change the state */ 1014 softc->flags |= PROBE_FLAG_ACMD_SENT; 1015 break; 1016 } 1017 1018 softc->flags &= ~PROBE_FLAG_ACMD_SENT; 1019 if ((mmcio->cmd.resp[0] & MMC_OCR_CARD_BUSY) || 1020 (mmcio->cmd.arg & MMC_OCR_VOLTAGE) == 0) { 1021 struct mmc_params *mmcp = &path->device->mmc_ident_data; 1022 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1023 ("Card OCR: %08x\n", mmcio->cmd.resp[0])); 1024 if (mmcp->card_ocr == 0) { 1025 mmcp->card_ocr = mmcio->cmd.resp[0]; 1026 /* Now when we know OCR that we want -- send it to card */ 1027 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1028 ("-> sending OCR to card\n")); 1029 } else { 1030 /* We already know the OCR and despite of that we 1031 * are processing the answer to ACMD41 -> move on 1032 */ 1033 PROBE_SET_ACTION(softc, PROBE_GET_CID); 1034 } 1035 /* Getting an answer to ACMD41 means the card has memory */ 1036 mmcp->card_features |= CARD_FEATURE_MEMORY; 1037 1038 /* Standard capacity vs High Capacity memory card */ 1039 if (mmcio->cmd.resp[0] & MMC_OCR_CCS) { 1040 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1041 ("Card is SDHC\n")); 1042 mmcp->card_features |= CARD_FEATURE_SDHC; 1043 } 1044 1045 /* Whether the card supports 1.8V signaling */ 1046 if (mmcio->cmd.resp[0] & MMC_OCR_S18A) { 1047 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1048 ("Card supports 1.8V signaling\n")); 1049 mmcp->card_features |= CARD_FEATURE_18V; 1050 if (softc->flags & PROBE_FLAG_HOST_CAN_DO_18V) { 1051 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1052 ("Host supports 1.8V signaling. Switch voltage!\n")); 1053 done_ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS; 1054 done_ccb->ccb_h.flags = CAM_DIR_NONE; 1055 done_ccb->ccb_h.retry_count = 0; 1056 done_ccb->ccb_h.timeout = 100; 1057 done_ccb->ccb_h.cbfcnp = NULL; 1058 done_ccb->cts.proto_specific.mmc.ios.vccq = vccq_180; 1059 done_ccb->cts.proto_specific.mmc.ios_valid = MMC_VCCQ; 1060 xpt_action(done_ccb); 1061 } 1062 } 1063 } else { 1064 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1065 ("Card not ready: %08x\n", mmcio->cmd.resp[0])); 1066 /* Send CMD55+ACMD41 once again */ 1067 PROBE_SET_ACTION(softc, PROBE_SEND_APP_OP_COND); 1068 } 1069 1070 break; 1071 } 1072 case PROBE_GET_CID: /* XXX move to mmc_da */ 1073 { 1074 mmcio = &done_ccb->mmcio; 1075 err = mmcio->cmd.error; 1076 1077 if (err != MMC_ERR_NONE) { 1078 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1079 ("PROBE_GET_CID: error %d\n", err)); 1080 PROBE_SET_ACTION(softc, PROBE_INVALID); 1081 break; 1082 } 1083 1084 struct mmc_params *mmcp = &path->device->mmc_ident_data; 1085 memcpy(mmcp->card_cid, mmcio->cmd.resp, 4 * sizeof(uint32_t)); 1086 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1087 ("CID %08x%08x%08x%08x\n", 1088 mmcp->card_cid[0], 1089 mmcp->card_cid[1], 1090 mmcp->card_cid[2], 1091 mmcp->card_cid[3])); 1092 if (mmcp->card_features & CARD_FEATURE_MMC) 1093 PROBE_SET_ACTION(softc, PROBE_MMC_SET_RELATIVE_ADDR); 1094 else 1095 PROBE_SET_ACTION(softc, PROBE_SEND_RELATIVE_ADDR); 1096 break; 1097 } 1098 case PROBE_SEND_RELATIVE_ADDR: { 1099 mmcio = &done_ccb->mmcio; 1100 err = mmcio->cmd.error; 1101 struct mmc_params *mmcp = &path->device->mmc_ident_data; 1102 uint16_t rca = mmcio->cmd.resp[0] >> 16; 1103 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1104 ("Card published RCA: %u\n", rca)); 1105 path->device->mmc_ident_data.card_rca = rca; 1106 if (err != MMC_ERR_NONE) { 1107 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1108 ("PROBE_SEND_RELATIVE_ADDR: error %d\n", err)); 1109 PROBE_SET_ACTION(softc, PROBE_INVALID); 1110 break; 1111 } 1112 1113 /* If memory is present, get CSD, otherwise select card */ 1114 if (mmcp->card_features & CARD_FEATURE_MEMORY) 1115 PROBE_SET_ACTION(softc, PROBE_GET_CSD); 1116 else 1117 PROBE_SET_ACTION(softc, PROBE_SELECT_CARD); 1118 break; 1119 } 1120 case PROBE_MMC_SET_RELATIVE_ADDR: 1121 mmcio = &done_ccb->mmcio; 1122 err = mmcio->cmd.error; 1123 if (err != MMC_ERR_NONE) { 1124 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1125 ("PROBE_MMC_SET_RELATIVE_ADDR: error %d\n", err)); 1126 PROBE_SET_ACTION(softc, PROBE_INVALID); 1127 break; 1128 } 1129 path->device->mmc_ident_data.card_rca = MMC_PROPOSED_RCA; 1130 PROBE_SET_ACTION(softc, PROBE_GET_CSD); 1131 break; 1132 case PROBE_GET_CSD: { 1133 mmcio = &done_ccb->mmcio; 1134 err = mmcio->cmd.error; 1135 1136 if (err != MMC_ERR_NONE) { 1137 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1138 ("PROBE_GET_CSD: error %d\n", err)); 1139 PROBE_SET_ACTION(softc, PROBE_INVALID); 1140 break; 1141 } 1142 1143 struct mmc_params *mmcp = &path->device->mmc_ident_data; 1144 memcpy(mmcp->card_csd, mmcio->cmd.resp, 4 * sizeof(uint32_t)); 1145 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1146 ("CSD %08x%08x%08x%08x\n", 1147 mmcp->card_csd[0], 1148 mmcp->card_csd[1], 1149 mmcp->card_csd[2], 1150 mmcp->card_csd[3])); 1151 PROBE_SET_ACTION(softc, PROBE_SELECT_CARD); 1152 break; 1153 } 1154 case PROBE_SELECT_CARD: { 1155 mmcio = &done_ccb->mmcio; 1156 err = mmcio->cmd.error; 1157 if (err != MMC_ERR_NONE) { 1158 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1159 ("PROBE_SEND_RELATIVE_ADDR: error %d\n", err)); 1160 PROBE_SET_ACTION(softc, PROBE_INVALID); 1161 break; 1162 } 1163 1164 PROBE_SET_ACTION(softc, PROBE_DONE); 1165 break; 1166 } 1167 default: 1168 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1169 ("mmcprobe_done: invalid action state 0x%x\n", softc->action)); 1170 panic("default: case in mmc_probe_done()"); 1171 } 1172 1173 if (softc->action == PROBE_INVALID && 1174 (path->device->flags & CAM_DEV_UNCONFIGURED) == 0) { 1175 xpt_async(AC_LOST_DEVICE, path, NULL); 1176 } 1177 1178 if (softc->action != PROBE_INVALID) 1179 xpt_schedule(periph, priority); 1180 /* Drop freeze taken due to CAM_DEV_QFREEZE flag set. */ 1181 int frozen = cam_release_devq(path, 0, 0, 0, FALSE); 1182 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, 1183 ("mmcprobe_done: remaining freeze count %d\n", frozen)); 1184 1185 if (softc->action == PROBE_DONE) { 1186 /* Notify the system that the device is found! */ 1187 if (periph->path->device->flags & CAM_DEV_UNCONFIGURED) { 1188 path->device->flags &= ~CAM_DEV_UNCONFIGURED; 1189 xpt_acquire_device(path->device); 1190 done_ccb->ccb_h.func_code = XPT_GDEV_TYPE; 1191 xpt_action(done_ccb); 1192 xpt_async(AC_FOUND_DEVICE, path, done_ccb); 1193 } 1194 } 1195 xpt_release_ccb(done_ccb); 1196 if (softc->action == PROBE_DONE || softc->action == PROBE_INVALID) { 1197 cam_periph_invalidate(periph); 1198 cam_periph_release_locked(periph); 1199 } 1200 } 1201 1202 void 1203 mmc_path_inq(struct ccb_pathinq *cpi, const char *hba, 1204 const struct cam_sim *sim, size_t maxio) 1205 { 1206 1207 cpi->version_num = 1; 1208 cpi->hba_inquiry = 0; 1209 cpi->target_sprt = 0; 1210 cpi->hba_misc = PIM_NOBUSRESET | PIM_SEQSCAN; 1211 cpi->hba_eng_cnt = 0; 1212 cpi->max_target = 0; 1213 cpi->max_lun = 0; 1214 cpi->initiator_id = 1; 1215 cpi->maxio = maxio; 1216 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 1217 strncpy(cpi->hba_vid, hba, HBA_IDLEN); 1218 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 1219 cpi->unit_number = cam_sim_unit(sim); 1220 cpi->bus_id = cam_sim_bus(sim); 1221 cpi->protocol = PROTO_MMCSD; 1222 cpi->protocol_version = SCSI_REV_0; 1223 cpi->transport = XPORT_MMCSD; 1224 cpi->transport_version = 1; 1225 1226 cpi->base_transfer_speed = 100; /* XXX WTF? */ 1227 1228 cpi->ccb_h.status = CAM_REQ_CMP; 1229 } 1230