1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2006 Bernd Walter <tisco@FreeBSD.org> All rights reserved. 5 * Copyright (c) 2009 Alexander Motin <mav@FreeBSD.org> All rights reserved. 6 * Copyright (c) 2015-2017 Ilya Bakulin <kibab@FreeBSD.org> All rights reserved. 7 * Copyright (c) 2006 M. Warner Losh <imp@FreeBSD.org> 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer, 14 * without modification, immediately at the beginning of the file. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 20 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 21 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 22 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 23 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 24 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 25 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 26 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 27 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 28 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 29 * 30 * Some code derived from the sys/dev/mmc and sys/cam/ata 31 * Thanks to Warner Losh <imp@FreeBSD.org>, Alexander Motin <mav@FreeBSD.org> 32 * Bernd Walter <tisco@FreeBSD.org>, and other authors. 33 */ 34 35 #include <sys/cdefs.h> 36 __FBSDID("$FreeBSD$"); 37 38 //#include "opt_sdda.h" 39 40 #include <sys/param.h> 41 42 #ifdef _KERNEL 43 #include <sys/systm.h> 44 #include <sys/kernel.h> 45 #include <sys/bio.h> 46 #include <sys/sysctl.h> 47 #include <sys/endian.h> 48 #include <sys/taskqueue.h> 49 #include <sys/lock.h> 50 #include <sys/mutex.h> 51 #include <sys/conf.h> 52 #include <sys/devicestat.h> 53 #include <sys/eventhandler.h> 54 #include <sys/malloc.h> 55 #include <sys/cons.h> 56 #include <sys/proc.h> 57 #include <sys/reboot.h> 58 #include <geom/geom_disk.h> 59 #include <machine/_inttypes.h> /* for PRIu64 */ 60 #endif /* _KERNEL */ 61 62 #ifndef _KERNEL 63 #include <stdio.h> 64 #include <string.h> 65 #endif /* _KERNEL */ 66 67 #include <cam/cam.h> 68 #include <cam/cam_ccb.h> 69 #include <cam/cam_queue.h> 70 #include <cam/cam_periph.h> 71 #include <cam/cam_sim.h> 72 #include <cam/cam_xpt.h> 73 #include <cam/cam_xpt_sim.h> 74 #include <cam/cam_xpt_periph.h> 75 #include <cam/cam_xpt_internal.h> 76 #include <cam/cam_debug.h> 77 78 #include <cam/mmc/mmc_all.h> 79 80 #ifdef _KERNEL 81 82 typedef enum { 83 SDDA_FLAG_OPEN = 0x0002, 84 SDDA_FLAG_DIRTY = 0x0004 85 } sdda_flags; 86 87 typedef enum { 88 SDDA_STATE_INIT, 89 SDDA_STATE_INVALID, 90 SDDA_STATE_NORMAL, 91 SDDA_STATE_PART_SWITCH, 92 } sdda_state; 93 94 #define SDDA_FMT_BOOT "sdda%dboot" 95 #define SDDA_FMT_GP "sdda%dgp" 96 #define SDDA_FMT_RPMB "sdda%drpmb" 97 #define SDDA_LABEL_ENH "enh" 98 99 #define SDDA_PART_NAMELEN (16 + 1) 100 101 struct sdda_softc; 102 103 struct sdda_part { 104 struct disk *disk; 105 struct bio_queue_head bio_queue; 106 sdda_flags flags; 107 struct sdda_softc *sc; 108 u_int cnt; 109 u_int type; 110 bool ro; 111 char name[SDDA_PART_NAMELEN]; 112 }; 113 114 struct sdda_softc { 115 int outstanding_cmds; /* Number of active commands */ 116 int refcount; /* Active xpt_action() calls */ 117 sdda_state state; 118 struct mmc_data *mmcdata; 119 struct cam_periph *periph; 120 // sdda_quirks quirks; 121 struct task start_init_task; 122 uint32_t raw_csd[4]; 123 uint8_t raw_ext_csd[512]; /* MMC only? */ 124 struct mmc_csd csd; 125 struct mmc_cid cid; 126 struct mmc_scr scr; 127 /* Calculated from CSD */ 128 uint64_t sector_count; 129 uint64_t mediasize; 130 131 /* Calculated from CID */ 132 char card_id_string[64];/* Formatted CID info (serial, MFG, etc) */ 133 char card_sn_string[16];/* Formatted serial # for disk->d_ident */ 134 /* Determined from CSD + is highspeed card*/ 135 uint32_t card_f_max; 136 137 /* Generic switch timeout */ 138 uint32_t cmd6_time; 139 uint32_t timings; /* Mask of bus timings supported */ 140 uint32_t vccq_120; /* Mask of bus timings at VCCQ of 1.2 V */ 141 uint32_t vccq_180; /* Mask of bus timings at VCCQ of 1.8 V */ 142 /* MMC partitions support */ 143 struct sdda_part *part[MMC_PART_MAX]; 144 uint8_t part_curr; /* Partition currently switched to */ 145 uint8_t part_requested; /* What partition we're currently switching to */ 146 uint32_t part_time; /* Partition switch timeout [us] */ 147 off_t enh_base; /* Enhanced user data area slice base ... */ 148 off_t enh_size; /* ... and size [bytes] */ 149 int log_count; 150 struct timeval log_time; 151 }; 152 153 static const char *mmc_errmsg[] = 154 { 155 "None", 156 "Timeout", 157 "Bad CRC", 158 "Fifo", 159 "Failed", 160 "Invalid", 161 "NO MEMORY" 162 }; 163 164 #define ccb_bp ppriv_ptr1 165 166 static disk_strategy_t sddastrategy; 167 static periph_init_t sddainit; 168 static void sddaasync(void *callback_arg, u_int32_t code, 169 struct cam_path *path, void *arg); 170 static periph_ctor_t sddaregister; 171 static periph_dtor_t sddacleanup; 172 static periph_start_t sddastart; 173 static periph_oninv_t sddaoninvalidate; 174 static void sddadone(struct cam_periph *periph, 175 union ccb *done_ccb); 176 static int sddaerror(union ccb *ccb, u_int32_t cam_flags, 177 u_int32_t sense_flags); 178 179 static int mmc_handle_reply(union ccb *ccb); 180 static uint16_t get_rca(struct cam_periph *periph); 181 static void sdda_start_init(void *context, union ccb *start_ccb); 182 static void sdda_start_init_task(void *context, int pending); 183 static void sdda_process_mmc_partitions(struct cam_periph *periph, union ccb *start_ccb); 184 static uint32_t sdda_get_host_caps(struct cam_periph *periph, union ccb *ccb); 185 static int mmc_select_card(struct cam_periph *periph, union ccb *ccb, uint32_t rca); 186 static inline uint32_t mmc_get_sector_size(struct cam_periph *periph) {return MMC_SECTOR_SIZE;} 187 188 static SYSCTL_NODE(_kern_cam, OID_AUTO, sdda, CTLFLAG_RD | CTLFLAG_MPSAFE, 0, 189 "CAM Direct Access Disk driver"); 190 191 static int sdda_mmcsd_compat = 1; 192 SYSCTL_INT(_kern_cam_sdda, OID_AUTO, mmcsd_compat, CTLFLAG_RDTUN, 193 &sdda_mmcsd_compat, 1, "Enable creation of mmcsd aliases."); 194 195 /* TODO: actually issue GET_TRAN_SETTINGS to get R/O status */ 196 static inline bool sdda_get_read_only(struct cam_periph *periph, union ccb *start_ccb) 197 { 198 199 return (false); 200 } 201 202 static uint32_t mmc_get_spec_vers(struct cam_periph *periph); 203 static uint64_t mmc_get_media_size(struct cam_periph *periph); 204 static uint32_t mmc_get_cmd6_timeout(struct cam_periph *periph); 205 static bool sdda_add_part(struct cam_periph *periph, u_int type, 206 const char *name, u_int cnt, off_t media_size, bool ro); 207 208 static struct periph_driver sddadriver = 209 { 210 sddainit, "sdda", 211 TAILQ_HEAD_INITIALIZER(sddadriver.units), /* generation */ 0 212 }; 213 214 PERIPHDRIVER_DECLARE(sdda, sddadriver); 215 216 static MALLOC_DEFINE(M_SDDA, "sd_da", "sd_da buffers"); 217 218 static const int exp[8] = { 219 1, 10, 100, 1000, 10000, 100000, 1000000, 10000000 220 }; 221 222 static const int mant[16] = { 223 0, 10, 12, 13, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80 224 }; 225 226 static const int cur_min[8] = { 227 500, 1000, 5000, 10000, 25000, 35000, 60000, 100000 228 }; 229 230 static const int cur_max[8] = { 231 1000, 5000, 10000, 25000, 35000, 45000, 800000, 200000 232 }; 233 234 static uint16_t 235 get_rca(struct cam_periph *periph) { 236 return periph->path->device->mmc_ident_data.card_rca; 237 } 238 239 /* 240 * Figure out if CCB execution resulted in error. 241 * Look at both CAM-level errors and on MMC protocol errors. 242 * 243 * Return value is always MMC error. 244 */ 245 static int 246 mmc_handle_reply(union ccb *ccb) 247 { 248 KASSERT(ccb->ccb_h.func_code == XPT_MMC_IO, 249 ("ccb %p: cannot handle non-XPT_MMC_IO errors, got func_code=%d", 250 ccb, ccb->ccb_h.func_code)); 251 252 /* CAM-level error should always correspond to MMC-level error */ 253 if (((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) && 254 (ccb->mmcio.cmd.error != MMC_ERR_NONE)) 255 panic("CCB status is OK but MMC error != MMC_ERR_NONE"); 256 257 if (ccb->mmcio.cmd.error != MMC_ERR_NONE) { 258 xpt_print_path(ccb->ccb_h.path); 259 printf("CMD%d failed, err %d (%s)\n", 260 ccb->mmcio.cmd.opcode, 261 ccb->mmcio.cmd.error, 262 mmc_errmsg[ccb->mmcio.cmd.error]); 263 } 264 return (ccb->mmcio.cmd.error); 265 } 266 267 static uint32_t 268 mmc_get_bits(uint32_t *bits, int bit_len, int start, int size) 269 { 270 const int i = (bit_len / 32) - (start / 32) - 1; 271 const int shift = start & 31; 272 uint32_t retval = bits[i] >> shift; 273 if (size + shift > 32) 274 retval |= bits[i - 1] << (32 - shift); 275 return (retval & ((1llu << size) - 1)); 276 } 277 278 static void 279 mmc_decode_csd_sd(uint32_t *raw_csd, struct mmc_csd *csd) 280 { 281 int v; 282 int m; 283 int e; 284 285 memset(csd, 0, sizeof(*csd)); 286 csd->csd_structure = v = mmc_get_bits(raw_csd, 128, 126, 2); 287 288 /* Common members between 1.0 and 2.0 */ 289 m = mmc_get_bits(raw_csd, 128, 115, 4); 290 e = mmc_get_bits(raw_csd, 128, 112, 3); 291 csd->tacc = (exp[e] * mant[m] + 9) / 10; 292 csd->nsac = mmc_get_bits(raw_csd, 128, 104, 8) * 100; 293 m = mmc_get_bits(raw_csd, 128, 99, 4); 294 e = mmc_get_bits(raw_csd, 128, 96, 3); 295 csd->tran_speed = exp[e] * 10000 * mant[m]; 296 csd->ccc = mmc_get_bits(raw_csd, 128, 84, 12); 297 csd->read_bl_len = 1 << mmc_get_bits(raw_csd, 128, 80, 4); 298 csd->read_bl_partial = mmc_get_bits(raw_csd, 128, 79, 1); 299 csd->write_blk_misalign = mmc_get_bits(raw_csd, 128, 78, 1); 300 csd->read_blk_misalign = mmc_get_bits(raw_csd, 128, 77, 1); 301 csd->dsr_imp = mmc_get_bits(raw_csd, 128, 76, 1); 302 csd->erase_blk_en = mmc_get_bits(raw_csd, 128, 46, 1); 303 csd->erase_sector = mmc_get_bits(raw_csd, 128, 39, 7) + 1; 304 csd->wp_grp_size = mmc_get_bits(raw_csd, 128, 32, 7); 305 csd->wp_grp_enable = mmc_get_bits(raw_csd, 128, 31, 1); 306 csd->r2w_factor = 1 << mmc_get_bits(raw_csd, 128, 26, 3); 307 csd->write_bl_len = 1 << mmc_get_bits(raw_csd, 128, 22, 4); 308 csd->write_bl_partial = mmc_get_bits(raw_csd, 128, 21, 1); 309 310 if (v == 0) { 311 csd->vdd_r_curr_min = cur_min[mmc_get_bits(raw_csd, 128, 59, 3)]; 312 csd->vdd_r_curr_max = cur_max[mmc_get_bits(raw_csd, 128, 56, 3)]; 313 csd->vdd_w_curr_min = cur_min[mmc_get_bits(raw_csd, 128, 53, 3)]; 314 csd->vdd_w_curr_max = cur_max[mmc_get_bits(raw_csd, 128, 50, 3)]; 315 m = mmc_get_bits(raw_csd, 128, 62, 12); 316 e = mmc_get_bits(raw_csd, 128, 47, 3); 317 csd->capacity = ((1 + m) << (e + 2)) * csd->read_bl_len; 318 } else if (v == 1) { 319 csd->capacity = ((uint64_t)mmc_get_bits(raw_csd, 128, 48, 22) + 1) * 320 512 * 1024; 321 } else 322 panic("unknown SD CSD version"); 323 } 324 325 static void 326 mmc_decode_csd_mmc(uint32_t *raw_csd, struct mmc_csd *csd) 327 { 328 int m; 329 int e; 330 331 memset(csd, 0, sizeof(*csd)); 332 csd->csd_structure = mmc_get_bits(raw_csd, 128, 126, 2); 333 csd->spec_vers = mmc_get_bits(raw_csd, 128, 122, 4); 334 m = mmc_get_bits(raw_csd, 128, 115, 4); 335 e = mmc_get_bits(raw_csd, 128, 112, 3); 336 csd->tacc = exp[e] * mant[m] + 9 / 10; 337 csd->nsac = mmc_get_bits(raw_csd, 128, 104, 8) * 100; 338 m = mmc_get_bits(raw_csd, 128, 99, 4); 339 e = mmc_get_bits(raw_csd, 128, 96, 3); 340 csd->tran_speed = exp[e] * 10000 * mant[m]; 341 csd->ccc = mmc_get_bits(raw_csd, 128, 84, 12); 342 csd->read_bl_len = 1 << mmc_get_bits(raw_csd, 128, 80, 4); 343 csd->read_bl_partial = mmc_get_bits(raw_csd, 128, 79, 1); 344 csd->write_blk_misalign = mmc_get_bits(raw_csd, 128, 78, 1); 345 csd->read_blk_misalign = mmc_get_bits(raw_csd, 128, 77, 1); 346 csd->dsr_imp = mmc_get_bits(raw_csd, 128, 76, 1); 347 csd->vdd_r_curr_min = cur_min[mmc_get_bits(raw_csd, 128, 59, 3)]; 348 csd->vdd_r_curr_max = cur_max[mmc_get_bits(raw_csd, 128, 56, 3)]; 349 csd->vdd_w_curr_min = cur_min[mmc_get_bits(raw_csd, 128, 53, 3)]; 350 csd->vdd_w_curr_max = cur_max[mmc_get_bits(raw_csd, 128, 50, 3)]; 351 m = mmc_get_bits(raw_csd, 128, 62, 12); 352 e = mmc_get_bits(raw_csd, 128, 47, 3); 353 csd->capacity = ((1 + m) << (e + 2)) * csd->read_bl_len; 354 csd->erase_blk_en = 0; 355 csd->erase_sector = (mmc_get_bits(raw_csd, 128, 42, 5) + 1) * 356 (mmc_get_bits(raw_csd, 128, 37, 5) + 1); 357 csd->wp_grp_size = mmc_get_bits(raw_csd, 128, 32, 5); 358 csd->wp_grp_enable = mmc_get_bits(raw_csd, 128, 31, 1); 359 csd->r2w_factor = 1 << mmc_get_bits(raw_csd, 128, 26, 3); 360 csd->write_bl_len = 1 << mmc_get_bits(raw_csd, 128, 22, 4); 361 csd->write_bl_partial = mmc_get_bits(raw_csd, 128, 21, 1); 362 } 363 364 static void 365 mmc_decode_cid_sd(uint32_t *raw_cid, struct mmc_cid *cid) 366 { 367 int i; 368 369 /* There's no version info, so we take it on faith */ 370 memset(cid, 0, sizeof(*cid)); 371 cid->mid = mmc_get_bits(raw_cid, 128, 120, 8); 372 cid->oid = mmc_get_bits(raw_cid, 128, 104, 16); 373 for (i = 0; i < 5; i++) 374 cid->pnm[i] = mmc_get_bits(raw_cid, 128, 96 - i * 8, 8); 375 cid->pnm[5] = 0; 376 cid->prv = mmc_get_bits(raw_cid, 128, 56, 8); 377 cid->psn = mmc_get_bits(raw_cid, 128, 24, 32); 378 cid->mdt_year = mmc_get_bits(raw_cid, 128, 12, 8) + 2000; 379 cid->mdt_month = mmc_get_bits(raw_cid, 128, 8, 4); 380 } 381 382 static void 383 mmc_decode_cid_mmc(uint32_t *raw_cid, struct mmc_cid *cid) 384 { 385 int i; 386 387 /* There's no version info, so we take it on faith */ 388 memset(cid, 0, sizeof(*cid)); 389 cid->mid = mmc_get_bits(raw_cid, 128, 120, 8); 390 cid->oid = mmc_get_bits(raw_cid, 128, 104, 8); 391 for (i = 0; i < 6; i++) 392 cid->pnm[i] = mmc_get_bits(raw_cid, 128, 96 - i * 8, 8); 393 cid->pnm[6] = 0; 394 cid->prv = mmc_get_bits(raw_cid, 128, 48, 8); 395 cid->psn = mmc_get_bits(raw_cid, 128, 16, 32); 396 cid->mdt_month = mmc_get_bits(raw_cid, 128, 12, 4); 397 cid->mdt_year = mmc_get_bits(raw_cid, 128, 8, 4) + 1997; 398 } 399 400 static void 401 mmc_format_card_id_string(struct sdda_softc *sc, struct mmc_params *mmcp) 402 { 403 char oidstr[8]; 404 uint8_t c1; 405 uint8_t c2; 406 407 /* 408 * Format a card ID string for use by the mmcsd driver, it's what 409 * appears between the <> in the following: 410 * mmcsd0: 968MB <SD SD01G 8.0 SN 2686905 Mfg 08/2008 by 3 TN> at mmc0 411 * 22.5MHz/4bit/128-block 412 * 413 * Also format just the card serial number, which the mmcsd driver will 414 * use as the disk->d_ident string. 415 * 416 * The card_id_string in mmc_ivars is currently allocated as 64 bytes, 417 * and our max formatted length is currently 55 bytes if every field 418 * contains the largest value. 419 * 420 * Sometimes the oid is two printable ascii chars; when it's not, 421 * format it as 0xnnnn instead. 422 */ 423 c1 = (sc->cid.oid >> 8) & 0x0ff; 424 c2 = sc->cid.oid & 0x0ff; 425 if (c1 > 0x1f && c1 < 0x7f && c2 > 0x1f && c2 < 0x7f) 426 snprintf(oidstr, sizeof(oidstr), "%c%c", c1, c2); 427 else 428 snprintf(oidstr, sizeof(oidstr), "0x%04x", sc->cid.oid); 429 snprintf(sc->card_sn_string, sizeof(sc->card_sn_string), 430 "%08X", sc->cid.psn); 431 snprintf(sc->card_id_string, sizeof(sc->card_id_string), 432 "%s%s %s %d.%d SN %08X MFG %02d/%04d by %d %s", 433 mmcp->card_features & CARD_FEATURE_MMC ? "MMC" : "SD", 434 mmcp->card_features & CARD_FEATURE_SDHC ? "HC" : "", 435 sc->cid.pnm, sc->cid.prv >> 4, sc->cid.prv & 0x0f, 436 sc->cid.psn, sc->cid.mdt_month, sc->cid.mdt_year, 437 sc->cid.mid, oidstr); 438 } 439 440 static int 441 sddaopen(struct disk *dp) 442 { 443 struct sdda_part *part; 444 struct cam_periph *periph; 445 struct sdda_softc *softc; 446 int error; 447 448 part = (struct sdda_part *)dp->d_drv1; 449 softc = part->sc; 450 periph = softc->periph; 451 if (cam_periph_acquire(periph) != 0) { 452 return(ENXIO); 453 } 454 455 cam_periph_lock(periph); 456 if ((error = cam_periph_hold(periph, PRIBIO|PCATCH)) != 0) { 457 cam_periph_unlock(periph); 458 cam_periph_release(periph); 459 return (error); 460 } 461 462 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddaopen\n")); 463 464 part->flags |= SDDA_FLAG_OPEN; 465 466 cam_periph_unhold(periph); 467 cam_periph_unlock(periph); 468 return (0); 469 } 470 471 static int 472 sddaclose(struct disk *dp) 473 { 474 struct sdda_part *part; 475 struct cam_periph *periph; 476 struct sdda_softc *softc; 477 478 part = (struct sdda_part *)dp->d_drv1; 479 softc = part->sc; 480 periph = softc->periph; 481 part->flags &= ~SDDA_FLAG_OPEN; 482 483 cam_periph_lock(periph); 484 485 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddaclose\n")); 486 487 while (softc->refcount != 0) 488 cam_periph_sleep(periph, &softc->refcount, PRIBIO, "sddaclose", 1); 489 cam_periph_unlock(periph); 490 cam_periph_release(periph); 491 return (0); 492 } 493 494 static void 495 sddaschedule(struct cam_periph *periph) 496 { 497 struct sdda_softc *softc = (struct sdda_softc *)periph->softc; 498 struct sdda_part *part; 499 struct bio *bp; 500 int i; 501 502 /* Check if we have more work to do. */ 503 /* Find partition that has outstanding commands. Prefer current partition. */ 504 bp = bioq_first(&softc->part[softc->part_curr]->bio_queue); 505 if (bp == NULL) { 506 for (i = 0; i < MMC_PART_MAX; i++) { 507 if ((part = softc->part[i]) != NULL && 508 (bp = bioq_first(&softc->part[i]->bio_queue)) != NULL) 509 break; 510 } 511 } 512 if (bp != NULL) { 513 xpt_schedule(periph, CAM_PRIORITY_NORMAL); 514 } 515 } 516 517 /* 518 * Actually translate the requested transfer into one the physical driver 519 * can understand. The transfer is described by a buf and will include 520 * only one physical transfer. 521 */ 522 static void 523 sddastrategy(struct bio *bp) 524 { 525 struct cam_periph *periph; 526 struct sdda_part *part; 527 struct sdda_softc *softc; 528 529 part = (struct sdda_part *)bp->bio_disk->d_drv1; 530 softc = part->sc; 531 periph = softc->periph; 532 533 cam_periph_lock(periph); 534 535 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddastrategy(%p)\n", bp)); 536 537 /* 538 * If the device has been made invalid, error out 539 */ 540 if ((periph->flags & CAM_PERIPH_INVALID) != 0) { 541 cam_periph_unlock(periph); 542 biofinish(bp, NULL, ENXIO); 543 return; 544 } 545 546 /* 547 * Place it in the queue of disk activities for this disk 548 */ 549 bioq_disksort(&part->bio_queue, bp); 550 551 /* 552 * Schedule ourselves for performing the work. 553 */ 554 sddaschedule(periph); 555 cam_periph_unlock(periph); 556 557 return; 558 } 559 560 static void 561 sddainit(void) 562 { 563 cam_status status; 564 565 /* 566 * Install a global async callback. This callback will 567 * receive async callbacks like "new device found". 568 */ 569 status = xpt_register_async(AC_FOUND_DEVICE, sddaasync, NULL, NULL); 570 571 if (status != CAM_REQ_CMP) { 572 printf("sdda: Failed to attach master async callback " 573 "due to status 0x%x!\n", status); 574 } 575 } 576 577 /* 578 * Callback from GEOM, called when it has finished cleaning up its 579 * resources. 580 */ 581 static void 582 sddadiskgonecb(struct disk *dp) 583 { 584 struct cam_periph *periph; 585 struct sdda_part *part; 586 587 part = (struct sdda_part *)dp->d_drv1; 588 periph = part->sc->periph; 589 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddadiskgonecb\n")); 590 591 cam_periph_release(periph); 592 } 593 594 static void 595 sddaoninvalidate(struct cam_periph *periph) 596 { 597 struct sdda_softc *softc; 598 struct sdda_part *part; 599 600 softc = (struct sdda_softc *)periph->softc; 601 602 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddaoninvalidate\n")); 603 604 /* 605 * De-register any async callbacks. 606 */ 607 xpt_register_async(0, sddaasync, periph, periph->path); 608 609 /* 610 * Return all queued I/O with ENXIO. 611 * XXX Handle any transactions queued to the card 612 * with XPT_ABORT_CCB. 613 */ 614 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("bioq_flush start\n")); 615 for (int i = 0; i < MMC_PART_MAX; i++) { 616 if ((part = softc->part[i]) != NULL) { 617 bioq_flush(&part->bio_queue, NULL, ENXIO); 618 disk_gone(part->disk); 619 } 620 } 621 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("bioq_flush end\n")); 622 } 623 624 static void 625 sddacleanup(struct cam_periph *periph) 626 { 627 struct sdda_softc *softc; 628 struct sdda_part *part; 629 int i; 630 631 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddacleanup\n")); 632 softc = (struct sdda_softc *)periph->softc; 633 634 cam_periph_unlock(periph); 635 636 for (i = 0; i < MMC_PART_MAX; i++) { 637 if ((part = softc->part[i]) != NULL) { 638 disk_destroy(part->disk); 639 free(part, M_DEVBUF); 640 softc->part[i] = NULL; 641 } 642 } 643 free(softc, M_DEVBUF); 644 cam_periph_lock(periph); 645 } 646 647 static void 648 sddaasync(void *callback_arg, u_int32_t code, 649 struct cam_path *path, void *arg) 650 { 651 struct ccb_getdev cgd; 652 struct cam_periph *periph; 653 struct sdda_softc *softc; 654 655 periph = (struct cam_periph *)callback_arg; 656 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("sddaasync(code=%d)\n", code)); 657 switch (code) { 658 case AC_FOUND_DEVICE: 659 { 660 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("=> AC_FOUND_DEVICE\n")); 661 struct ccb_getdev *cgd; 662 cam_status status; 663 664 cgd = (struct ccb_getdev *)arg; 665 if (cgd == NULL) 666 break; 667 668 if (cgd->protocol != PROTO_MMCSD) 669 break; 670 671 if (!(path->device->mmc_ident_data.card_features & CARD_FEATURE_MEMORY)) { 672 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("No memory on the card!\n")); 673 break; 674 } 675 676 /* 677 * Allocate a peripheral instance for 678 * this device and start the probe 679 * process. 680 */ 681 status = cam_periph_alloc(sddaregister, sddaoninvalidate, 682 sddacleanup, sddastart, 683 "sdda", CAM_PERIPH_BIO, 684 path, sddaasync, 685 AC_FOUND_DEVICE, cgd); 686 687 if (status != CAM_REQ_CMP 688 && status != CAM_REQ_INPROG) 689 printf("sddaasync: Unable to attach to new device " 690 "due to status 0x%x\n", status); 691 break; 692 } 693 case AC_GETDEV_CHANGED: 694 { 695 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("=> AC_GETDEV_CHANGED\n")); 696 softc = (struct sdda_softc *)periph->softc; 697 memset(&cgd, 0, sizeof(cgd)); 698 xpt_setup_ccb(&cgd.ccb_h, periph->path, CAM_PRIORITY_NORMAL); 699 cgd.ccb_h.func_code = XPT_GDEV_TYPE; 700 xpt_action((union ccb *)&cgd); 701 cam_periph_async(periph, code, path, arg); 702 break; 703 } 704 case AC_ADVINFO_CHANGED: 705 { 706 uintptr_t buftype; 707 int i; 708 709 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("=> AC_ADVINFO_CHANGED\n")); 710 buftype = (uintptr_t)arg; 711 if (buftype == CDAI_TYPE_PHYS_PATH) { 712 struct sdda_softc *softc; 713 struct sdda_part *part; 714 715 softc = periph->softc; 716 for (i = 0; i < MMC_PART_MAX; i++) { 717 if ((part = softc->part[i]) != NULL) { 718 disk_attr_changed(part->disk, "GEOM::physpath", 719 M_NOWAIT); 720 } 721 } 722 } 723 break; 724 } 725 default: 726 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("=> default?!\n")); 727 cam_periph_async(periph, code, path, arg); 728 break; 729 } 730 } 731 732 static int 733 sddagetattr(struct bio *bp) 734 { 735 struct cam_periph *periph; 736 struct sdda_softc *softc; 737 struct sdda_part *part; 738 int ret; 739 740 part = (struct sdda_part *)bp->bio_disk->d_drv1; 741 softc = part->sc; 742 periph = softc->periph; 743 cam_periph_lock(periph); 744 ret = xpt_getattr(bp->bio_data, bp->bio_length, bp->bio_attribute, 745 periph->path); 746 cam_periph_unlock(periph); 747 if (ret == 0) 748 bp->bio_completed = bp->bio_length; 749 return (ret); 750 } 751 752 static cam_status 753 sddaregister(struct cam_periph *periph, void *arg) 754 { 755 struct sdda_softc *softc; 756 struct ccb_getdev *cgd; 757 union ccb *request_ccb; /* CCB representing the probe request */ 758 759 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddaregister\n")); 760 cgd = (struct ccb_getdev *)arg; 761 if (cgd == NULL) { 762 printf("sddaregister: no getdev CCB, can't register device\n"); 763 return (CAM_REQ_CMP_ERR); 764 } 765 766 softc = (struct sdda_softc *)malloc(sizeof(*softc), M_DEVBUF, 767 M_NOWAIT|M_ZERO); 768 if (softc == NULL) { 769 printf("sddaregister: Unable to probe new device. " 770 "Unable to allocate softc\n"); 771 return (CAM_REQ_CMP_ERR); 772 } 773 774 softc->state = SDDA_STATE_INIT; 775 softc->mmcdata = 776 (struct mmc_data *)malloc(sizeof(struct mmc_data), M_DEVBUF, M_NOWAIT|M_ZERO); 777 if (softc->mmcdata == NULL) { 778 printf("sddaregister: Unable to probe new device. " 779 "Unable to allocate mmcdata\n"); 780 free(softc, M_DEVBUF); 781 return (CAM_REQ_CMP_ERR); 782 } 783 periph->softc = softc; 784 softc->periph = periph; 785 786 request_ccb = (union ccb*) arg; 787 xpt_schedule(periph, CAM_PRIORITY_XPT); 788 TASK_INIT(&softc->start_init_task, 0, sdda_start_init_task, periph); 789 taskqueue_enqueue(taskqueue_thread, &softc->start_init_task); 790 791 return (CAM_REQ_CMP); 792 } 793 794 static int 795 mmc_exec_app_cmd(struct cam_periph *periph, union ccb *ccb, 796 struct mmc_command *cmd) { 797 int err; 798 799 /* Send APP_CMD first */ 800 memset(&ccb->mmcio.cmd, 0, sizeof(struct mmc_command)); 801 memset(&ccb->mmcio.stop, 0, sizeof(struct mmc_command)); 802 cam_fill_mmcio(&ccb->mmcio, 803 /*retries*/ 0, 804 /*cbfcnp*/ NULL, 805 /*flags*/ CAM_DIR_NONE, 806 /*mmc_opcode*/ MMC_APP_CMD, 807 /*mmc_arg*/ get_rca(periph) << 16, 808 /*mmc_flags*/ MMC_RSP_R1 | MMC_CMD_AC, 809 /*mmc_data*/ NULL, 810 /*timeout*/ 0); 811 812 cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL); 813 err = mmc_handle_reply(ccb); 814 if (err != 0) 815 return (err); 816 if (!(ccb->mmcio.cmd.resp[0] & R1_APP_CMD)) 817 return (EIO); 818 819 /* Now exec actual command */ 820 int flags = 0; 821 if (cmd->data != NULL) { 822 ccb->mmcio.cmd.data = cmd->data; 823 if (cmd->data->flags & MMC_DATA_READ) 824 flags |= CAM_DIR_IN; 825 if (cmd->data->flags & MMC_DATA_WRITE) 826 flags |= CAM_DIR_OUT; 827 } else flags = CAM_DIR_NONE; 828 829 cam_fill_mmcio(&ccb->mmcio, 830 /*retries*/ 0, 831 /*cbfcnp*/ NULL, 832 /*flags*/ flags, 833 /*mmc_opcode*/ cmd->opcode, 834 /*mmc_arg*/ cmd->arg, 835 /*mmc_flags*/ cmd->flags, 836 /*mmc_data*/ cmd->data, 837 /*timeout*/ 0); 838 839 cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL); 840 err = mmc_handle_reply(ccb); 841 if (err != 0) 842 return (err); 843 memcpy(cmd->resp, ccb->mmcio.cmd.resp, sizeof(cmd->resp)); 844 cmd->error = ccb->mmcio.cmd.error; 845 846 return (0); 847 } 848 849 static int 850 mmc_app_get_scr(struct cam_periph *periph, union ccb *ccb, uint32_t *rawscr) { 851 int err; 852 struct mmc_command cmd; 853 struct mmc_data d; 854 855 memset(&cmd, 0, sizeof(cmd)); 856 memset(&d, 0, sizeof(d)); 857 858 memset(rawscr, 0, 8); 859 cmd.opcode = ACMD_SEND_SCR; 860 cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; 861 cmd.arg = 0; 862 863 d.data = rawscr; 864 d.len = 8; 865 d.flags = MMC_DATA_READ; 866 cmd.data = &d; 867 868 err = mmc_exec_app_cmd(periph, ccb, &cmd); 869 rawscr[0] = be32toh(rawscr[0]); 870 rawscr[1] = be32toh(rawscr[1]); 871 return (err); 872 } 873 874 static int 875 mmc_send_ext_csd(struct cam_periph *periph, union ccb *ccb, 876 uint8_t *rawextcsd, size_t buf_len) { 877 int err; 878 struct mmc_data d; 879 880 KASSERT(buf_len == 512, ("Buffer for ext csd must be 512 bytes")); 881 memset(&d, 0, sizeof(d)); 882 d.data = rawextcsd; 883 d.len = buf_len; 884 d.flags = MMC_DATA_READ; 885 memset(d.data, 0, d.len); 886 887 cam_fill_mmcio(&ccb->mmcio, 888 /*retries*/ 0, 889 /*cbfcnp*/ NULL, 890 /*flags*/ CAM_DIR_IN, 891 /*mmc_opcode*/ MMC_SEND_EXT_CSD, 892 /*mmc_arg*/ 0, 893 /*mmc_flags*/ MMC_RSP_R1 | MMC_CMD_ADTC, 894 /*mmc_data*/ &d, 895 /*timeout*/ 0); 896 897 cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL); 898 err = mmc_handle_reply(ccb); 899 return (err); 900 } 901 902 static void 903 mmc_app_decode_scr(uint32_t *raw_scr, struct mmc_scr *scr) 904 { 905 unsigned int scr_struct; 906 907 memset(scr, 0, sizeof(*scr)); 908 909 scr_struct = mmc_get_bits(raw_scr, 64, 60, 4); 910 if (scr_struct != 0) { 911 printf("Unrecognised SCR structure version %d\n", 912 scr_struct); 913 return; 914 } 915 scr->sda_vsn = mmc_get_bits(raw_scr, 64, 56, 4); 916 scr->bus_widths = mmc_get_bits(raw_scr, 64, 48, 4); 917 } 918 919 static inline void 920 mmc_switch_fill_mmcio(union ccb *ccb, 921 uint8_t set, uint8_t index, uint8_t value, u_int timeout) 922 { 923 int arg = (MMC_SWITCH_FUNC_WR << 24) | 924 (index << 16) | 925 (value << 8) | 926 set; 927 928 cam_fill_mmcio(&ccb->mmcio, 929 /*retries*/ 0, 930 /*cbfcnp*/ NULL, 931 /*flags*/ CAM_DIR_NONE, 932 /*mmc_opcode*/ MMC_SWITCH_FUNC, 933 /*mmc_arg*/ arg, 934 /*mmc_flags*/ MMC_RSP_R1B | MMC_CMD_AC, 935 /*mmc_data*/ NULL, 936 /*timeout*/ timeout); 937 } 938 939 static int 940 mmc_select_card(struct cam_periph *periph, union ccb *ccb, uint32_t rca) 941 { 942 int flags, err; 943 944 flags = (rca ? MMC_RSP_R1B : MMC_RSP_NONE) | MMC_CMD_AC; 945 cam_fill_mmcio(&ccb->mmcio, 946 /*retries*/ 0, 947 /*cbfcnp*/ NULL, 948 /*flags*/ CAM_DIR_IN, 949 /*mmc_opcode*/ MMC_SELECT_CARD, 950 /*mmc_arg*/ rca << 16, 951 /*mmc_flags*/ flags, 952 /*mmc_data*/ NULL, 953 /*timeout*/ 0); 954 955 cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL); 956 err = mmc_handle_reply(ccb); 957 return (err); 958 } 959 960 static int 961 mmc_switch(struct cam_periph *periph, union ccb *ccb, 962 uint8_t set, uint8_t index, uint8_t value, u_int timeout) 963 { 964 int err; 965 966 mmc_switch_fill_mmcio(ccb, set, index, value, timeout); 967 cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL); 968 err = mmc_handle_reply(ccb); 969 return (err); 970 } 971 972 static uint32_t 973 mmc_get_spec_vers(struct cam_periph *periph) { 974 struct sdda_softc *softc = (struct sdda_softc *)periph->softc; 975 976 return (softc->csd.spec_vers); 977 } 978 979 static uint64_t 980 mmc_get_media_size(struct cam_periph *periph) { 981 struct sdda_softc *softc = (struct sdda_softc *)periph->softc; 982 983 return (softc->mediasize); 984 } 985 986 static uint32_t 987 mmc_get_cmd6_timeout(struct cam_periph *periph) 988 { 989 struct sdda_softc *softc = (struct sdda_softc *)periph->softc; 990 991 if (mmc_get_spec_vers(periph) >= 6) 992 return (softc->raw_ext_csd[EXT_CSD_GEN_CMD6_TIME] * 10); 993 return (500 * 1000); 994 } 995 996 static int 997 mmc_sd_switch(struct cam_periph *periph, union ccb *ccb, 998 uint8_t mode, uint8_t grp, uint8_t value, 999 uint8_t *res) { 1000 struct mmc_data mmc_d; 1001 uint32_t arg; 1002 int err; 1003 1004 memset(res, 0, 64); 1005 memset(&mmc_d, 0, sizeof(mmc_d)); 1006 mmc_d.len = 64; 1007 mmc_d.data = res; 1008 mmc_d.flags = MMC_DATA_READ; 1009 1010 arg = mode << 31; /* 0 - check, 1 - set */ 1011 arg |= 0x00FFFFFF; 1012 arg &= ~(0xF << (grp * 4)); 1013 arg |= value << (grp * 4); 1014 1015 cam_fill_mmcio(&ccb->mmcio, 1016 /*retries*/ 0, 1017 /*cbfcnp*/ NULL, 1018 /*flags*/ CAM_DIR_IN, 1019 /*mmc_opcode*/ SD_SWITCH_FUNC, 1020 /*mmc_arg*/ arg, 1021 /*mmc_flags*/ MMC_RSP_R1 | MMC_CMD_ADTC, 1022 /*mmc_data*/ &mmc_d, 1023 /*timeout*/ 0); 1024 1025 cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL); 1026 err = mmc_handle_reply(ccb); 1027 return (err); 1028 } 1029 1030 static int 1031 mmc_set_timing(struct cam_periph *periph, 1032 union ccb *ccb, 1033 enum mmc_bus_timing timing) 1034 { 1035 u_char switch_res[64]; 1036 int err; 1037 uint8_t value; 1038 struct sdda_softc *softc = (struct sdda_softc *)periph->softc; 1039 struct mmc_params *mmcp = &periph->path->device->mmc_ident_data; 1040 1041 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, 1042 ("mmc_set_timing(timing=%d)", timing)); 1043 switch (timing) { 1044 case bus_timing_normal: 1045 value = 0; 1046 break; 1047 case bus_timing_hs: 1048 value = 1; 1049 break; 1050 default: 1051 return (MMC_ERR_INVALID); 1052 } 1053 if (mmcp->card_features & CARD_FEATURE_MMC) { 1054 err = mmc_switch(periph, ccb, EXT_CSD_CMD_SET_NORMAL, 1055 EXT_CSD_HS_TIMING, value, softc->cmd6_time); 1056 } else { 1057 err = mmc_sd_switch(periph, ccb, SD_SWITCH_MODE_SET, SD_SWITCH_GROUP1, value, switch_res); 1058 } 1059 1060 /* Set high-speed timing on the host */ 1061 struct ccb_trans_settings_mmc *cts; 1062 cts = &ccb->cts.proto_specific.mmc; 1063 ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS; 1064 ccb->ccb_h.flags = CAM_DIR_NONE; 1065 ccb->ccb_h.retry_count = 0; 1066 ccb->ccb_h.timeout = 100; 1067 ccb->ccb_h.cbfcnp = NULL; 1068 cts->ios.timing = timing; 1069 cts->ios_valid = MMC_BT; 1070 xpt_action(ccb); 1071 1072 return (err); 1073 } 1074 1075 static void 1076 sdda_start_init_task(void *context, int pending) { 1077 union ccb *new_ccb; 1078 struct cam_periph *periph; 1079 1080 periph = (struct cam_periph *)context; 1081 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sdda_start_init_task\n")); 1082 new_ccb = xpt_alloc_ccb(); 1083 xpt_setup_ccb(&new_ccb->ccb_h, periph->path, 1084 CAM_PRIORITY_NONE); 1085 1086 cam_periph_lock(periph); 1087 cam_periph_hold(periph, PRIBIO|PCATCH); 1088 sdda_start_init(context, new_ccb); 1089 cam_periph_unhold(periph); 1090 cam_periph_unlock(periph); 1091 xpt_free_ccb(new_ccb); 1092 } 1093 1094 static void 1095 sdda_set_bus_width(struct cam_periph *periph, union ccb *ccb, int width) { 1096 struct sdda_softc *softc = (struct sdda_softc *)periph->softc; 1097 struct mmc_params *mmcp = &periph->path->device->mmc_ident_data; 1098 int err; 1099 1100 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sdda_set_bus_width\n")); 1101 1102 /* First set for the card, then for the host */ 1103 if (mmcp->card_features & CARD_FEATURE_MMC) { 1104 uint8_t value; 1105 switch (width) { 1106 case bus_width_1: 1107 value = EXT_CSD_BUS_WIDTH_1; 1108 break; 1109 case bus_width_4: 1110 value = EXT_CSD_BUS_WIDTH_4; 1111 break; 1112 case bus_width_8: 1113 value = EXT_CSD_BUS_WIDTH_8; 1114 break; 1115 default: 1116 panic("Invalid bus width %d", width); 1117 } 1118 err = mmc_switch(periph, ccb, EXT_CSD_CMD_SET_NORMAL, 1119 EXT_CSD_BUS_WIDTH, value, softc->cmd6_time); 1120 } else { 1121 /* For SD cards we send ACMD6 with the required bus width in arg */ 1122 struct mmc_command cmd; 1123 memset(&cmd, 0, sizeof(struct mmc_command)); 1124 cmd.opcode = ACMD_SET_BUS_WIDTH; 1125 cmd.arg = width; 1126 cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; 1127 err = mmc_exec_app_cmd(periph, ccb, &cmd); 1128 } 1129 1130 if (err != MMC_ERR_NONE) { 1131 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Error %d when setting bus width on the card\n", err)); 1132 return; 1133 } 1134 /* Now card is done, set the host to the same width */ 1135 struct ccb_trans_settings_mmc *cts; 1136 cts = &ccb->cts.proto_specific.mmc; 1137 ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS; 1138 ccb->ccb_h.flags = CAM_DIR_NONE; 1139 ccb->ccb_h.retry_count = 0; 1140 ccb->ccb_h.timeout = 100; 1141 ccb->ccb_h.cbfcnp = NULL; 1142 cts->ios.bus_width = width; 1143 cts->ios_valid = MMC_BW; 1144 xpt_action(ccb); 1145 } 1146 1147 static inline const char 1148 *part_type(u_int type) 1149 { 1150 1151 switch (type) { 1152 case EXT_CSD_PART_CONFIG_ACC_RPMB: 1153 return ("RPMB"); 1154 case EXT_CSD_PART_CONFIG_ACC_DEFAULT: 1155 return ("default"); 1156 case EXT_CSD_PART_CONFIG_ACC_BOOT0: 1157 return ("boot0"); 1158 case EXT_CSD_PART_CONFIG_ACC_BOOT1: 1159 return ("boot1"); 1160 case EXT_CSD_PART_CONFIG_ACC_GP0: 1161 case EXT_CSD_PART_CONFIG_ACC_GP1: 1162 case EXT_CSD_PART_CONFIG_ACC_GP2: 1163 case EXT_CSD_PART_CONFIG_ACC_GP3: 1164 return ("general purpose"); 1165 default: 1166 return ("(unknown type)"); 1167 } 1168 } 1169 1170 static inline const char 1171 *bus_width_str(enum mmc_bus_width w) 1172 { 1173 1174 switch (w) { 1175 case bus_width_1: 1176 return ("1-bit"); 1177 case bus_width_4: 1178 return ("4-bit"); 1179 case bus_width_8: 1180 return ("8-bit"); 1181 default: 1182 __assert_unreachable(); 1183 } 1184 } 1185 1186 static uint32_t 1187 sdda_get_host_caps(struct cam_periph *periph, union ccb *ccb) 1188 { 1189 struct ccb_trans_settings_mmc *cts; 1190 1191 cts = &ccb->cts.proto_specific.mmc; 1192 1193 ccb->ccb_h.func_code = XPT_GET_TRAN_SETTINGS; 1194 ccb->ccb_h.flags = CAM_DIR_NONE; 1195 ccb->ccb_h.retry_count = 0; 1196 ccb->ccb_h.timeout = 100; 1197 ccb->ccb_h.cbfcnp = NULL; 1198 xpt_action(ccb); 1199 1200 if (ccb->ccb_h.status != CAM_REQ_CMP) 1201 panic("Cannot get host caps"); 1202 return (cts->host_caps); 1203 } 1204 1205 static uint32_t 1206 sdda_get_max_data(struct cam_periph *periph, union ccb *ccb) 1207 { 1208 struct ccb_trans_settings_mmc *cts; 1209 1210 cts = &ccb->cts.proto_specific.mmc; 1211 memset(cts, 0, sizeof(struct ccb_trans_settings_mmc)); 1212 1213 ccb->ccb_h.func_code = XPT_GET_TRAN_SETTINGS; 1214 ccb->ccb_h.flags = CAM_DIR_NONE; 1215 ccb->ccb_h.retry_count = 0; 1216 ccb->ccb_h.timeout = 100; 1217 ccb->ccb_h.cbfcnp = NULL; 1218 xpt_action(ccb); 1219 1220 if (ccb->ccb_h.status != CAM_REQ_CMP) 1221 panic("Cannot get host max data"); 1222 KASSERT(cts->host_max_data != 0, ("host_max_data == 0?!")); 1223 return (cts->host_max_data); 1224 } 1225 1226 static void 1227 sdda_start_init(void *context, union ccb *start_ccb) 1228 { 1229 struct cam_periph *periph = (struct cam_periph *)context; 1230 struct ccb_trans_settings_mmc *cts; 1231 uint32_t host_caps; 1232 uint32_t sec_count; 1233 int err; 1234 int host_f_max; 1235 uint8_t card_type; 1236 1237 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sdda_start_init\n")); 1238 /* periph was held for us when this task was enqueued */ 1239 if ((periph->flags & CAM_PERIPH_INVALID) != 0) { 1240 cam_periph_release(periph); 1241 return; 1242 } 1243 1244 struct sdda_softc *softc = (struct sdda_softc *)periph->softc; 1245 struct mmc_params *mmcp = &periph->path->device->mmc_ident_data; 1246 struct cam_ed *device = periph->path->device; 1247 1248 if (mmcp->card_features & CARD_FEATURE_MMC) { 1249 mmc_decode_csd_mmc(mmcp->card_csd, &softc->csd); 1250 mmc_decode_cid_mmc(mmcp->card_cid, &softc->cid); 1251 if (mmc_get_spec_vers(periph) >= 4) { 1252 err = mmc_send_ext_csd(periph, start_ccb, 1253 (uint8_t *)&softc->raw_ext_csd, 1254 sizeof(softc->raw_ext_csd)); 1255 if (err != 0) { 1256 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, 1257 ("Cannot read EXT_CSD, err %d", err)); 1258 return; 1259 } 1260 } 1261 } else { 1262 mmc_decode_csd_sd(mmcp->card_csd, &softc->csd); 1263 mmc_decode_cid_sd(mmcp->card_cid, &softc->cid); 1264 } 1265 1266 softc->sector_count = softc->csd.capacity / 512; 1267 softc->mediasize = softc->csd.capacity; 1268 softc->cmd6_time = mmc_get_cmd6_timeout(periph); 1269 1270 /* MMC >= 4.x have EXT_CSD that has its own opinion about capacity */ 1271 if (mmc_get_spec_vers(periph) >= 4) { 1272 sec_count = softc->raw_ext_csd[EXT_CSD_SEC_CNT] + 1273 (softc->raw_ext_csd[EXT_CSD_SEC_CNT + 1] << 8) + 1274 (softc->raw_ext_csd[EXT_CSD_SEC_CNT + 2] << 16) + 1275 (softc->raw_ext_csd[EXT_CSD_SEC_CNT + 3] << 24); 1276 if (sec_count != 0) { 1277 softc->sector_count = sec_count; 1278 softc->mediasize = softc->sector_count * 512; 1279 /* FIXME: there should be a better name for this option...*/ 1280 mmcp->card_features |= CARD_FEATURE_SDHC; 1281 } 1282 } 1283 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, 1284 ("Capacity: %"PRIu64", sectors: %"PRIu64"\n", 1285 softc->mediasize, 1286 softc->sector_count)); 1287 mmc_format_card_id_string(softc, mmcp); 1288 1289 /* Update info for CAM */ 1290 device->serial_num_len = strlen(softc->card_sn_string); 1291 device->serial_num = (u_int8_t *)malloc((device->serial_num_len + 1), 1292 M_CAMXPT, M_NOWAIT); 1293 strlcpy(device->serial_num, softc->card_sn_string, device->serial_num_len + 1); 1294 1295 device->device_id_len = strlen(softc->card_id_string); 1296 device->device_id = (u_int8_t *)malloc((device->device_id_len + 1), 1297 M_CAMXPT, M_NOWAIT); 1298 strlcpy(device->device_id, softc->card_id_string, device->device_id_len + 1); 1299 1300 strlcpy(mmcp->model, softc->card_id_string, sizeof(mmcp->model)); 1301 1302 /* Set the clock frequency that the card can handle */ 1303 cts = &start_ccb->cts.proto_specific.mmc; 1304 1305 /* First, get the host's max freq */ 1306 start_ccb->ccb_h.func_code = XPT_GET_TRAN_SETTINGS; 1307 start_ccb->ccb_h.flags = CAM_DIR_NONE; 1308 start_ccb->ccb_h.retry_count = 0; 1309 start_ccb->ccb_h.timeout = 100; 1310 start_ccb->ccb_h.cbfcnp = NULL; 1311 xpt_action(start_ccb); 1312 1313 if (start_ccb->ccb_h.status != CAM_REQ_CMP) 1314 panic("Cannot get max host freq"); 1315 host_f_max = cts->host_f_max; 1316 host_caps = cts->host_caps; 1317 if (cts->ios.bus_width != bus_width_1) 1318 panic("Bus width in ios is not 1-bit"); 1319 1320 /* Now check if the card supports High-speed */ 1321 softc->card_f_max = softc->csd.tran_speed; 1322 1323 if (host_caps & MMC_CAP_HSPEED) { 1324 /* Find out if the card supports High speed timing */ 1325 if (mmcp->card_features & CARD_FEATURE_SD20) { 1326 /* Get and decode SCR */ 1327 uint32_t rawscr[2]; 1328 uint8_t res[64]; 1329 if (mmc_app_get_scr(periph, start_ccb, rawscr)) { 1330 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Cannot get SCR\n")); 1331 goto finish_hs_tests; 1332 } 1333 mmc_app_decode_scr(rawscr, &softc->scr); 1334 1335 if ((softc->scr.sda_vsn >= 1) && (softc->csd.ccc & (1<<10))) { 1336 mmc_sd_switch(periph, start_ccb, SD_SWITCH_MODE_CHECK, 1337 SD_SWITCH_GROUP1, SD_SWITCH_NOCHANGE, res); 1338 if (res[13] & 2) { 1339 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Card supports HS\n")); 1340 softc->card_f_max = SD_HS_MAX; 1341 } 1342 1343 /* 1344 * We deselect then reselect the card here. Some cards 1345 * become unselected and timeout with the above two 1346 * commands, although the state tables / diagrams in the 1347 * standard suggest they go back to the transfer state. 1348 * Other cards don't become deselected, and if we 1349 * attempt to blindly re-select them, we get timeout 1350 * errors from some controllers. So we deselect then 1351 * reselect to handle all situations. 1352 */ 1353 mmc_select_card(periph, start_ccb, 0); 1354 mmc_select_card(periph, start_ccb, get_rca(periph)); 1355 } else { 1356 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Not trying the switch\n")); 1357 goto finish_hs_tests; 1358 } 1359 } 1360 1361 if (mmcp->card_features & CARD_FEATURE_MMC && mmc_get_spec_vers(periph) >= 4) { 1362 card_type = softc->raw_ext_csd[EXT_CSD_CARD_TYPE]; 1363 if (card_type & EXT_CSD_CARD_TYPE_HS_52) 1364 softc->card_f_max = MMC_TYPE_HS_52_MAX; 1365 else if (card_type & EXT_CSD_CARD_TYPE_HS_26) 1366 softc->card_f_max = MMC_TYPE_HS_26_MAX; 1367 if ((card_type & EXT_CSD_CARD_TYPE_DDR_52_1_2V) != 0 && 1368 (host_caps & MMC_CAP_SIGNALING_120) != 0) { 1369 setbit(&softc->timings, bus_timing_mmc_ddr52); 1370 setbit(&softc->vccq_120, bus_timing_mmc_ddr52); 1371 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Card supports DDR52 at 1.2V\n")); 1372 } 1373 if ((card_type & EXT_CSD_CARD_TYPE_DDR_52_1_8V) != 0 && 1374 (host_caps & MMC_CAP_SIGNALING_180) != 0) { 1375 setbit(&softc->timings, bus_timing_mmc_ddr52); 1376 setbit(&softc->vccq_180, bus_timing_mmc_ddr52); 1377 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Card supports DDR52 at 1.8V\n")); 1378 } 1379 if ((card_type & EXT_CSD_CARD_TYPE_HS200_1_2V) != 0 && 1380 (host_caps & MMC_CAP_SIGNALING_120) != 0) { 1381 setbit(&softc->timings, bus_timing_mmc_hs200); 1382 setbit(&softc->vccq_120, bus_timing_mmc_hs200); 1383 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Card supports HS200 at 1.2V\n")); 1384 } 1385 if ((card_type & EXT_CSD_CARD_TYPE_HS200_1_8V) != 0 && 1386 (host_caps & MMC_CAP_SIGNALING_180) != 0) { 1387 setbit(&softc->timings, bus_timing_mmc_hs200); 1388 setbit(&softc->vccq_180, bus_timing_mmc_hs200); 1389 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Card supports HS200 at 1.8V\n")); 1390 } 1391 } 1392 } 1393 int f_max; 1394 finish_hs_tests: 1395 f_max = min(host_f_max, softc->card_f_max); 1396 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Set SD freq to %d MHz (min out of host f=%d MHz and card f=%d MHz)\n", f_max / 1000000, host_f_max / 1000000, softc->card_f_max / 1000000)); 1397 1398 /* Enable high-speed timing on the card */ 1399 if (f_max > 25000000) { 1400 err = mmc_set_timing(periph, start_ccb, bus_timing_hs); 1401 if (err != MMC_ERR_NONE) { 1402 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("Cannot switch card to high-speed mode")); 1403 f_max = 25000000; 1404 } 1405 } 1406 /* If possible, set lower-level signaling */ 1407 enum mmc_bus_timing timing; 1408 /* FIXME: MMCCAM supports max. bus_timing_mmc_ddr52 at the moment. */ 1409 for (timing = bus_timing_mmc_ddr52; timing > bus_timing_normal; timing--) { 1410 if (isset(&softc->vccq_120, timing)) { 1411 /* Set VCCQ = 1.2V */ 1412 start_ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS; 1413 start_ccb->ccb_h.flags = CAM_DIR_NONE; 1414 start_ccb->ccb_h.retry_count = 0; 1415 start_ccb->ccb_h.timeout = 100; 1416 start_ccb->ccb_h.cbfcnp = NULL; 1417 cts->ios.vccq = vccq_120; 1418 cts->ios_valid = MMC_VCCQ; 1419 xpt_action(start_ccb); 1420 break; 1421 } else if (isset(&softc->vccq_180, timing)) { 1422 /* Set VCCQ = 1.8V */ 1423 start_ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS; 1424 start_ccb->ccb_h.flags = CAM_DIR_NONE; 1425 start_ccb->ccb_h.retry_count = 0; 1426 start_ccb->ccb_h.timeout = 100; 1427 start_ccb->ccb_h.cbfcnp = NULL; 1428 cts->ios.vccq = vccq_180; 1429 cts->ios_valid = MMC_VCCQ; 1430 xpt_action(start_ccb); 1431 break; 1432 } else { 1433 /* Set VCCQ = 3.3V */ 1434 start_ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS; 1435 start_ccb->ccb_h.flags = CAM_DIR_NONE; 1436 start_ccb->ccb_h.retry_count = 0; 1437 start_ccb->ccb_h.timeout = 100; 1438 start_ccb->ccb_h.cbfcnp = NULL; 1439 cts->ios.vccq = vccq_330; 1440 cts->ios_valid = MMC_VCCQ; 1441 xpt_action(start_ccb); 1442 break; 1443 } 1444 } 1445 1446 /* Set frequency on the controller */ 1447 start_ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS; 1448 start_ccb->ccb_h.flags = CAM_DIR_NONE; 1449 start_ccb->ccb_h.retry_count = 0; 1450 start_ccb->ccb_h.timeout = 100; 1451 start_ccb->ccb_h.cbfcnp = NULL; 1452 cts->ios.clock = f_max; 1453 cts->ios_valid = MMC_CLK; 1454 xpt_action(start_ccb); 1455 1456 /* Set bus width */ 1457 enum mmc_bus_width desired_bus_width = bus_width_1; 1458 enum mmc_bus_width max_host_bus_width = 1459 (host_caps & MMC_CAP_8_BIT_DATA ? bus_width_8 : 1460 host_caps & MMC_CAP_4_BIT_DATA ? bus_width_4 : bus_width_1); 1461 enum mmc_bus_width max_card_bus_width = bus_width_1; 1462 if (mmcp->card_features & CARD_FEATURE_SD20 && 1463 softc->scr.bus_widths & SD_SCR_BUS_WIDTH_4) 1464 max_card_bus_width = bus_width_4; 1465 /* 1466 * Unlike SD, MMC cards don't have any information about supported bus width... 1467 * So we need to perform read/write test to find out the width. 1468 */ 1469 /* TODO: figure out bus width for MMC; use 8-bit for now (to test on BBB) */ 1470 if (mmcp->card_features & CARD_FEATURE_MMC) 1471 max_card_bus_width = bus_width_8; 1472 1473 desired_bus_width = min(max_host_bus_width, max_card_bus_width); 1474 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, 1475 ("Set bus width to %s (min of host %s and card %s)\n", 1476 bus_width_str(desired_bus_width), 1477 bus_width_str(max_host_bus_width), 1478 bus_width_str(max_card_bus_width))); 1479 sdda_set_bus_width(periph, start_ccb, desired_bus_width); 1480 1481 softc->state = SDDA_STATE_NORMAL; 1482 1483 cam_periph_unhold(periph); 1484 /* MMC partitions support */ 1485 if (mmcp->card_features & CARD_FEATURE_MMC && mmc_get_spec_vers(periph) >= 4) { 1486 sdda_process_mmc_partitions(periph, start_ccb); 1487 } else if (mmcp->card_features & CARD_FEATURE_SD20) { 1488 /* For SD[HC] cards, just add one partition that is the whole card */ 1489 if (sdda_add_part(periph, 0, "sdda", 1490 periph->unit_number, 1491 mmc_get_media_size(periph), 1492 sdda_get_read_only(periph, start_ccb)) == false) 1493 return; 1494 softc->part_curr = 0; 1495 } 1496 cam_periph_hold(periph, PRIBIO|PCATCH); 1497 1498 xpt_announce_periph(periph, softc->card_id_string); 1499 /* 1500 * Add async callbacks for bus reset and bus device reset calls. 1501 * I don't bother checking if this fails as, in most cases, 1502 * the system will function just fine without them and the only 1503 * alternative would be to not attach the device on failure. 1504 */ 1505 xpt_register_async(AC_LOST_DEVICE | AC_GETDEV_CHANGED | 1506 AC_ADVINFO_CHANGED, sddaasync, periph, periph->path); 1507 } 1508 1509 static bool 1510 sdda_add_part(struct cam_periph *periph, u_int type, const char *name, 1511 u_int cnt, off_t media_size, bool ro) 1512 { 1513 struct sdda_softc *sc = (struct sdda_softc *)periph->softc; 1514 struct sdda_part *part; 1515 struct ccb_pathinq cpi; 1516 1517 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, 1518 ("Partition type '%s', size %ju %s\n", 1519 part_type(type), 1520 media_size, 1521 ro ? "(read-only)" : "")); 1522 1523 part = sc->part[type] = malloc(sizeof(*part), M_DEVBUF, 1524 M_NOWAIT | M_ZERO); 1525 if (part == NULL) { 1526 printf("Cannot add partition for sdda\n"); 1527 return (false); 1528 } 1529 1530 part->cnt = cnt; 1531 part->type = type; 1532 part->ro = ro; 1533 part->sc = sc; 1534 snprintf(part->name, sizeof(part->name), name, periph->unit_number); 1535 1536 /* 1537 * Due to the nature of RPMB partition it doesn't make much sense 1538 * to add it as a disk. It would be more appropriate to create a 1539 * userland tool to operate on the partition or leverage the existing 1540 * tools from sysutils/mmc-utils. 1541 */ 1542 if (type == EXT_CSD_PART_CONFIG_ACC_RPMB) { 1543 /* TODO: Create device, assign IOCTL handler */ 1544 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, 1545 ("Don't know what to do with RPMB partitions yet\n")); 1546 return (false); 1547 } 1548 1549 bioq_init(&part->bio_queue); 1550 1551 bzero(&cpi, sizeof(cpi)); 1552 xpt_setup_ccb(&cpi.ccb_h, periph->path, CAM_PRIORITY_NONE); 1553 cpi.ccb_h.func_code = XPT_PATH_INQ; 1554 xpt_action((union ccb *)&cpi); 1555 1556 /* 1557 * Register this media as a disk 1558 */ 1559 (void)cam_periph_hold(periph, PRIBIO); 1560 cam_periph_unlock(periph); 1561 1562 part->disk = disk_alloc(); 1563 part->disk->d_rotation_rate = DISK_RR_NON_ROTATING; 1564 part->disk->d_devstat = devstat_new_entry(part->name, 1565 cnt, 512, 1566 DEVSTAT_ALL_SUPPORTED, 1567 DEVSTAT_TYPE_DIRECT | XPORT_DEVSTAT_TYPE(cpi.transport), 1568 DEVSTAT_PRIORITY_DISK); 1569 1570 part->disk->d_open = sddaopen; 1571 part->disk->d_close = sddaclose; 1572 part->disk->d_strategy = sddastrategy; 1573 part->disk->d_getattr = sddagetattr; 1574 part->disk->d_gone = sddadiskgonecb; 1575 part->disk->d_name = part->name; 1576 part->disk->d_drv1 = part; 1577 part->disk->d_maxsize = 1578 MIN(maxphys, sdda_get_max_data(periph, 1579 (union ccb *)&cpi) * mmc_get_sector_size(periph)); 1580 part->disk->d_unit = cnt; 1581 part->disk->d_flags = 0; 1582 strlcpy(part->disk->d_descr, sc->card_id_string, 1583 MIN(sizeof(part->disk->d_descr), sizeof(sc->card_id_string))); 1584 strlcpy(part->disk->d_ident, sc->card_sn_string, 1585 MIN(sizeof(part->disk->d_ident), sizeof(sc->card_sn_string))); 1586 part->disk->d_hba_vendor = cpi.hba_vendor; 1587 part->disk->d_hba_device = cpi.hba_device; 1588 part->disk->d_hba_subvendor = cpi.hba_subvendor; 1589 part->disk->d_hba_subdevice = cpi.hba_subdevice; 1590 snprintf(part->disk->d_attachment, sizeof(part->disk->d_attachment), 1591 "%s%d", cpi.dev_name, cpi.unit_number); 1592 1593 part->disk->d_sectorsize = mmc_get_sector_size(periph); 1594 part->disk->d_mediasize = media_size; 1595 part->disk->d_stripesize = 0; 1596 part->disk->d_fwsectors = 0; 1597 part->disk->d_fwheads = 0; 1598 1599 if (sdda_mmcsd_compat) 1600 disk_add_alias(part->disk, "mmcsd"); 1601 1602 /* 1603 * Acquire a reference to the periph before we register with GEOM. 1604 * We'll release this reference once GEOM calls us back (via 1605 * sddadiskgonecb()) telling us that our provider has been freed. 1606 */ 1607 if (cam_periph_acquire(periph) != 0) { 1608 xpt_print(periph->path, "%s: lost periph during " 1609 "registration!\n", __func__); 1610 cam_periph_lock(periph); 1611 return (false); 1612 } 1613 disk_create(part->disk, DISK_VERSION); 1614 cam_periph_lock(periph); 1615 cam_periph_unhold(periph); 1616 1617 return (true); 1618 } 1619 1620 /* 1621 * For MMC cards, process EXT_CSD and add partitions that are supported by 1622 * this device. 1623 */ 1624 static void 1625 sdda_process_mmc_partitions(struct cam_periph *periph, union ccb *ccb) 1626 { 1627 struct sdda_softc *sc = (struct sdda_softc *)periph->softc; 1628 struct mmc_params *mmcp = &periph->path->device->mmc_ident_data; 1629 off_t erase_size, sector_size, size, wp_size; 1630 int i; 1631 const uint8_t *ext_csd; 1632 uint8_t rev; 1633 bool comp, ro; 1634 1635 ext_csd = sc->raw_ext_csd; 1636 1637 /* 1638 * Enhanced user data area and general purpose partitions are only 1639 * supported in revision 1.4 (EXT_CSD_REV == 4) and later, the RPMB 1640 * partition in revision 1.5 (MMC v4.41, EXT_CSD_REV == 5) and later. 1641 */ 1642 rev = ext_csd[EXT_CSD_REV]; 1643 1644 /* 1645 * Ignore user-creatable enhanced user data area and general purpose 1646 * partitions partitions as long as partitioning hasn't been finished. 1647 */ 1648 comp = (ext_csd[EXT_CSD_PART_SET] & EXT_CSD_PART_SET_COMPLETED) != 0; 1649 1650 /* 1651 * Add enhanced user data area slice, unless it spans the entirety of 1652 * the user data area. The enhanced area is of a multiple of high 1653 * capacity write protect groups ((ERASE_GRP_SIZE + HC_WP_GRP_SIZE) * 1654 * 512 KB) and its offset given in either sectors or bytes, depending 1655 * on whether it's a high capacity device or not. 1656 * NB: The slicer and its slices need to be registered before adding 1657 * the disk for the corresponding user data area as re-tasting is 1658 * racy. 1659 */ 1660 sector_size = mmc_get_sector_size(periph); 1661 size = ext_csd[EXT_CSD_ENH_SIZE_MULT] + 1662 (ext_csd[EXT_CSD_ENH_SIZE_MULT + 1] << 8) + 1663 (ext_csd[EXT_CSD_ENH_SIZE_MULT + 2] << 16); 1664 if (rev >= 4 && comp == TRUE && size > 0 && 1665 (ext_csd[EXT_CSD_PART_SUPPORT] & 1666 EXT_CSD_PART_SUPPORT_ENH_ATTR_EN) != 0 && 1667 (ext_csd[EXT_CSD_PART_ATTR] & (EXT_CSD_PART_ATTR_ENH_USR)) != 0) { 1668 erase_size = ext_csd[EXT_CSD_ERASE_GRP_SIZE] * 1024 * 1669 MMC_SECTOR_SIZE; 1670 wp_size = ext_csd[EXT_CSD_HC_WP_GRP_SIZE]; 1671 size *= erase_size * wp_size; 1672 if (size != mmc_get_media_size(periph) * sector_size) { 1673 sc->enh_size = size; 1674 sc->enh_base = (ext_csd[EXT_CSD_ENH_START_ADDR] + 1675 (ext_csd[EXT_CSD_ENH_START_ADDR + 1] << 8) + 1676 (ext_csd[EXT_CSD_ENH_START_ADDR + 2] << 16) + 1677 (ext_csd[EXT_CSD_ENH_START_ADDR + 3] << 24)) * 1678 ((mmcp->card_features & CARD_FEATURE_SDHC) ? 1: MMC_SECTOR_SIZE); 1679 } else 1680 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, 1681 ("enhanced user data area spans entire device")); 1682 } 1683 1684 /* 1685 * Add default partition. This may be the only one or the user 1686 * data area in case partitions are supported. 1687 */ 1688 ro = sdda_get_read_only(periph, ccb); 1689 sdda_add_part(periph, EXT_CSD_PART_CONFIG_ACC_DEFAULT, "sdda", 1690 periph->unit_number, mmc_get_media_size(periph), ro); 1691 sc->part_curr = EXT_CSD_PART_CONFIG_ACC_DEFAULT; 1692 1693 if (mmc_get_spec_vers(periph) < 3) 1694 return; 1695 1696 /* Belatedly announce enhanced user data slice. */ 1697 if (sc->enh_size != 0) { 1698 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, 1699 ("enhanced user data area off 0x%jx size %ju bytes\n", 1700 sc->enh_base, sc->enh_size)); 1701 } 1702 1703 /* 1704 * Determine partition switch timeout (provided in units of 10 ms) 1705 * and ensure it's at least 300 ms as some eMMC chips lie. 1706 */ 1707 sc->part_time = max(ext_csd[EXT_CSD_PART_SWITCH_TO] * 10 * 1000, 1708 300 * 1000); 1709 1710 /* Add boot partitions, which are of a fixed multiple of 128 KB. */ 1711 size = ext_csd[EXT_CSD_BOOT_SIZE_MULT] * MMC_BOOT_RPMB_BLOCK_SIZE; 1712 if (size > 0 && (sdda_get_host_caps(periph, ccb) & MMC_CAP_BOOT_NOACC) == 0) { 1713 sdda_add_part(periph, EXT_CSD_PART_CONFIG_ACC_BOOT0, 1714 SDDA_FMT_BOOT, 0, size, 1715 ro | ((ext_csd[EXT_CSD_BOOT_WP_STATUS] & 1716 EXT_CSD_BOOT_WP_STATUS_BOOT0_MASK) != 0)); 1717 sdda_add_part(periph, EXT_CSD_PART_CONFIG_ACC_BOOT1, 1718 SDDA_FMT_BOOT, 1, size, 1719 ro | ((ext_csd[EXT_CSD_BOOT_WP_STATUS] & 1720 EXT_CSD_BOOT_WP_STATUS_BOOT1_MASK) != 0)); 1721 } 1722 1723 /* Add RPMB partition, which also is of a fixed multiple of 128 KB. */ 1724 size = ext_csd[EXT_CSD_RPMB_MULT] * MMC_BOOT_RPMB_BLOCK_SIZE; 1725 if (rev >= 5 && size > 0) 1726 sdda_add_part(periph, EXT_CSD_PART_CONFIG_ACC_RPMB, 1727 SDDA_FMT_RPMB, 0, size, ro); 1728 1729 if (rev <= 3 || comp == FALSE) 1730 return; 1731 1732 /* 1733 * Add general purpose partitions, which are of a multiple of high 1734 * capacity write protect groups, too. 1735 */ 1736 if ((ext_csd[EXT_CSD_PART_SUPPORT] & EXT_CSD_PART_SUPPORT_EN) != 0) { 1737 erase_size = ext_csd[EXT_CSD_ERASE_GRP_SIZE] * 1024 * 1738 MMC_SECTOR_SIZE; 1739 wp_size = ext_csd[EXT_CSD_HC_WP_GRP_SIZE]; 1740 for (i = 0; i < MMC_PART_GP_MAX; i++) { 1741 size = ext_csd[EXT_CSD_GP_SIZE_MULT + i * 3] + 1742 (ext_csd[EXT_CSD_GP_SIZE_MULT + i * 3 + 1] << 8) + 1743 (ext_csd[EXT_CSD_GP_SIZE_MULT + i * 3 + 2] << 16); 1744 if (size == 0) 1745 continue; 1746 sdda_add_part(periph, EXT_CSD_PART_CONFIG_ACC_GP0 + i, 1747 SDDA_FMT_GP, i, size * erase_size * wp_size, ro); 1748 } 1749 } 1750 } 1751 1752 /* 1753 * We cannot just call mmc_switch() since it will sleep, and we are in 1754 * GEOM context and cannot sleep. Instead, create an MMCIO request to switch 1755 * partitions and send it to h/w, and upon completion resume processing 1756 * the I/O queue. 1757 * This function cannot fail, instead check switch errors in sddadone(). 1758 */ 1759 static void 1760 sdda_init_switch_part(struct cam_periph *periph, union ccb *start_ccb, 1761 uint8_t part) 1762 { 1763 struct sdda_softc *sc = (struct sdda_softc *)periph->softc; 1764 uint8_t value; 1765 1766 KASSERT(part < MMC_PART_MAX, ("%s: invalid partition index", __func__)); 1767 sc->part_requested = part; 1768 1769 value = (sc->raw_ext_csd[EXT_CSD_PART_CONFIG] & 1770 ~EXT_CSD_PART_CONFIG_ACC_MASK) | part; 1771 1772 mmc_switch_fill_mmcio(start_ccb, EXT_CSD_CMD_SET_NORMAL, 1773 EXT_CSD_PART_CONFIG, value, sc->part_time); 1774 start_ccb->ccb_h.cbfcnp = sddadone; 1775 1776 sc->outstanding_cmds++; 1777 cam_periph_unlock(periph); 1778 xpt_action(start_ccb); 1779 cam_periph_lock(periph); 1780 } 1781 1782 /* Called with periph lock held! */ 1783 static void 1784 sddastart(struct cam_periph *periph, union ccb *start_ccb) 1785 { 1786 struct bio *bp; 1787 struct sdda_softc *softc = (struct sdda_softc *)periph->softc; 1788 struct sdda_part *part; 1789 struct mmc_params *mmcp = &periph->path->device->mmc_ident_data; 1790 uint8_t part_index; 1791 1792 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddastart\n")); 1793 1794 if (softc->state != SDDA_STATE_NORMAL) { 1795 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("device is not in SDDA_STATE_NORMAL yet\n")); 1796 xpt_release_ccb(start_ccb); 1797 return; 1798 } 1799 1800 /* Find partition that has outstanding commands. Prefer current partition. */ 1801 part_index = softc->part_curr; 1802 part = softc->part[softc->part_curr]; 1803 bp = bioq_first(&part->bio_queue); 1804 if (bp == NULL) { 1805 for (part_index = 0; part_index < MMC_PART_MAX; part_index++) { 1806 if ((part = softc->part[part_index]) != NULL && 1807 (bp = bioq_first(&softc->part[part_index]->bio_queue)) != NULL) 1808 break; 1809 } 1810 } 1811 if (bp == NULL) { 1812 xpt_release_ccb(start_ccb); 1813 return; 1814 } 1815 if (part_index != softc->part_curr) { 1816 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, 1817 ("Partition %d -> %d\n", softc->part_curr, part_index)); 1818 /* 1819 * According to section "6.2.2 Command restrictions" of the eMMC 1820 * specification v5.1, CMD19/CMD21 aren't allowed to be used with 1821 * RPMB partitions. So we pause re-tuning along with triggering 1822 * it up-front to decrease the likelihood of re-tuning becoming 1823 * necessary while accessing an RPMB partition. Consequently, an 1824 * RPMB partition should immediately be switched away from again 1825 * after an access in order to allow for re-tuning to take place 1826 * anew. 1827 */ 1828 /* TODO: pause retune if switching to RPMB partition */ 1829 softc->state = SDDA_STATE_PART_SWITCH; 1830 sdda_init_switch_part(periph, start_ccb, part_index); 1831 return; 1832 } 1833 1834 bioq_remove(&part->bio_queue, bp); 1835 1836 switch (bp->bio_cmd) { 1837 case BIO_WRITE: 1838 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("BIO_WRITE\n")); 1839 part->flags |= SDDA_FLAG_DIRTY; 1840 /* FALLTHROUGH */ 1841 case BIO_READ: 1842 { 1843 struct ccb_mmcio *mmcio; 1844 uint64_t blockno = bp->bio_pblkno; 1845 uint16_t count = bp->bio_bcount / 512; 1846 uint16_t opcode; 1847 1848 if (bp->bio_cmd == BIO_READ) 1849 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("BIO_READ\n")); 1850 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, 1851 ("Block %"PRIu64" cnt %u\n", blockno, count)); 1852 1853 /* Construct new MMC command */ 1854 if (bp->bio_cmd == BIO_READ) { 1855 if (count > 1) 1856 opcode = MMC_READ_MULTIPLE_BLOCK; 1857 else 1858 opcode = MMC_READ_SINGLE_BLOCK; 1859 } else { 1860 if (count > 1) 1861 opcode = MMC_WRITE_MULTIPLE_BLOCK; 1862 else 1863 opcode = MMC_WRITE_BLOCK; 1864 } 1865 1866 start_ccb->ccb_h.func_code = XPT_MMC_IO; 1867 start_ccb->ccb_h.flags = (bp->bio_cmd == BIO_READ ? CAM_DIR_IN : CAM_DIR_OUT); 1868 start_ccb->ccb_h.retry_count = 0; 1869 start_ccb->ccb_h.timeout = 15 * 1000; 1870 start_ccb->ccb_h.cbfcnp = sddadone; 1871 1872 mmcio = &start_ccb->mmcio; 1873 mmcio->cmd.opcode = opcode; 1874 mmcio->cmd.arg = blockno; 1875 if (!(mmcp->card_features & CARD_FEATURE_SDHC)) 1876 mmcio->cmd.arg <<= 9; 1877 1878 mmcio->cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; 1879 mmcio->cmd.data = softc->mmcdata; 1880 memset(mmcio->cmd.data, 0, sizeof(struct mmc_data)); 1881 mmcio->cmd.data->data = bp->bio_data; 1882 mmcio->cmd.data->len = 512 * count; 1883 mmcio->cmd.data->flags = (bp->bio_cmd == BIO_READ ? MMC_DATA_READ : MMC_DATA_WRITE); 1884 /* Direct h/w to issue CMD12 upon completion */ 1885 if (count > 1) { 1886 mmcio->cmd.data->flags |= MMC_DATA_MULTI; 1887 mmcio->stop.opcode = MMC_STOP_TRANSMISSION; 1888 mmcio->stop.flags = MMC_RSP_R1B | MMC_CMD_AC; 1889 mmcio->stop.arg = 0; 1890 } 1891 1892 break; 1893 } 1894 case BIO_FLUSH: 1895 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("BIO_FLUSH\n")); 1896 sddaschedule(periph); 1897 break; 1898 case BIO_DELETE: 1899 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("BIO_DELETE\n")); 1900 sddaschedule(periph); 1901 break; 1902 default: 1903 biofinish(bp, NULL, EOPNOTSUPP); 1904 xpt_release_ccb(start_ccb); 1905 return; 1906 } 1907 start_ccb->ccb_h.ccb_bp = bp; 1908 softc->outstanding_cmds++; 1909 softc->refcount++; 1910 cam_periph_unlock(periph); 1911 xpt_action(start_ccb); 1912 cam_periph_lock(periph); 1913 1914 /* May have more work to do, so ensure we stay scheduled */ 1915 sddaschedule(periph); 1916 } 1917 1918 static void 1919 sddadone(struct cam_periph *periph, union ccb *done_ccb) 1920 { 1921 struct bio *bp; 1922 struct sdda_softc *softc; 1923 struct ccb_mmcio *mmcio; 1924 struct cam_path *path; 1925 uint32_t card_status; 1926 int error = 0; 1927 1928 softc = (struct sdda_softc *)periph->softc; 1929 mmcio = &done_ccb->mmcio; 1930 path = done_ccb->ccb_h.path; 1931 1932 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("sddadone\n")); 1933 if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { 1934 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("Error!!!\n")); 1935 if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) 1936 cam_release_devq(path, 1937 /*relsim_flags*/0, 1938 /*reduction*/0, 1939 /*timeout*/0, 1940 /*getcount_only*/0); 1941 error = 5; /* EIO */ 1942 } else { 1943 if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) 1944 panic("REQ_CMP with QFRZN"); 1945 error = 0; 1946 } 1947 1948 card_status = mmcio->cmd.resp[0]; 1949 CAM_DEBUG(path, CAM_DEBUG_TRACE, 1950 ("Card status: %08x\n", R1_STATUS(card_status))); 1951 CAM_DEBUG(path, CAM_DEBUG_TRACE, 1952 ("Current state: %d\n", R1_CURRENT_STATE(card_status))); 1953 1954 /* Process result of switching MMC partitions */ 1955 if (softc->state == SDDA_STATE_PART_SWITCH) { 1956 CAM_DEBUG(path, CAM_DEBUG_TRACE, 1957 ("Completing partition switch to %d\n", 1958 softc->part_requested)); 1959 softc->outstanding_cmds--; 1960 /* Complete partition switch */ 1961 softc->state = SDDA_STATE_NORMAL; 1962 if (error != MMC_ERR_NONE) { 1963 /* TODO: Unpause retune if accessing RPMB */ 1964 xpt_release_ccb(done_ccb); 1965 xpt_schedule(periph, CAM_PRIORITY_NORMAL); 1966 return; 1967 } 1968 1969 softc->raw_ext_csd[EXT_CSD_PART_CONFIG] = 1970 (softc->raw_ext_csd[EXT_CSD_PART_CONFIG] & 1971 ~EXT_CSD_PART_CONFIG_ACC_MASK) | softc->part_requested; 1972 /* TODO: Unpause retune if accessing RPMB */ 1973 softc->part_curr = softc->part_requested; 1974 xpt_release_ccb(done_ccb); 1975 1976 /* Return to processing BIO requests */ 1977 xpt_schedule(periph, CAM_PRIORITY_NORMAL); 1978 return; 1979 } 1980 1981 bp = (struct bio *)done_ccb->ccb_h.ccb_bp; 1982 bp->bio_error = error; 1983 if (error != 0) { 1984 bp->bio_resid = bp->bio_bcount; 1985 bp->bio_flags |= BIO_ERROR; 1986 } else { 1987 /* XXX: How many bytes remaining? */ 1988 bp->bio_resid = 0; 1989 if (bp->bio_resid > 0) 1990 bp->bio_flags |= BIO_ERROR; 1991 } 1992 1993 softc->outstanding_cmds--; 1994 xpt_release_ccb(done_ccb); 1995 /* 1996 * Release the periph refcount taken in sddastart() for each CCB. 1997 */ 1998 KASSERT(softc->refcount >= 1, ("sddadone softc %p refcount %d", softc, softc->refcount)); 1999 softc->refcount--; 2000 biodone(bp); 2001 } 2002 2003 static int 2004 sddaerror(union ccb *ccb, u_int32_t cam_flags, u_int32_t sense_flags) 2005 { 2006 return(cam_periph_error(ccb, cam_flags, sense_flags)); 2007 } 2008 #endif /* _KERNEL */ 2009